rc
Dependents: WizFi250_AP_HelloWorld
Fork of mbed-src by
Diff: targets/hal/TARGET_Freescale/TARGET_K20XX/sleep.c
- Revision:
- 489:119543c9f674
- Parent:
- 445:3312ed629f01
- Child:
- 499:d0e9408fd176
--- a/targets/hal/TARGET_Freescale/TARGET_K20XX/sleep.c Thu Mar 05 13:15:07 2015 +0000 +++ b/targets/hal/TARGET_Freescale/TARGET_K20XX/sleep.c Thu Mar 12 14:30:49 2015 +0000 @@ -39,13 +39,32 @@ SCB->SCR = 1<<SCB_SCR_SLEEPDEEP_Pos; __WFI(); - //Switch back to PLL as clock source if needed //The interrupt that woke up the device will run at reduced speed if (PLL_FLL_en) { + +#if defined (TARGET_K20D50M) if (MCG->C6 & (1<<MCG_C6_PLLS_SHIFT) != 0) /* If PLL */ while((MCG->S & MCG_S_LOCK0_MASK) == 0x00U); /* Wait until locked */ MCG->C1 &= ~MCG_C1_CLKS_MASK; +#else + // MCG->C1: CLKS=2,FRDIV=3,IREFS=0,IRCLKEN=1,IREFSTEN=0 + MCG->C1 = MCG_C1_CLKS(2) | MCG_C1_FRDIV(3) | MCG_C1_IRCLKEN_MASK; + // MCG->C6: LOLIE=0,PLLS=0,CME=0,VDIV0=0 + MCG->C6 = MCG_C6_VDIV0(0); + while((MCG->S & MCG_S_OSCINIT0_MASK) == 0u) { } // Check that the oscillator is running + while((MCG->S & 0x0Cu) != 0x08u) { } // Wait until external reference clock is selected as MCG output + // MCG->C5: PLLCLKEN=0,PLLSTEN=0,PRDIV0=3 + MCG->C5 = MCG_C5_PRDIV0(5); + // MCG->C6: LOLIE=0,PLLS=1,CME=0,VDIV0=3 + MCG->C6 = MCG_C6_PLLS_MASK | MCG_C6_VDIV0(3); + while((MCG->S & 0x0Cu) != 0x08u) { } // Wait until external reference clock is selected as MCG output + while((MCG->S & MCG_S_PLLST_MASK) == 0u) { } // Wait until the source of the PLLS clock has switched to the PLL + while((MCG->S & MCG_S_LOCK0_MASK) == 0u) { } // Wait until locked + // MCG->C1: CLKS=0,FRDIV=2,IREFS=0,IRCLKEN=1,IREFSTEN=0 + MCG->C1 = MCG_C1_FRDIV(2) | MCG_C1_IRCLKEN_MASK;; + while((MCG->S & 0x0Cu) != 0x0Cu) { } // Wait until output of the PLL is selected + while((MCG->S & MCG_S_LOCK0_MASK) == 0u) { } // Wait until locked +#endif } - }