Egor Rumjantsev
The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of
mbed
by 
mbed official
Diff: TARGET_LPC4088_DM/LPC407x_8x_177x_8x.h
- Revision:
- 93:e188a91d3eaa
diff -r 4fc01daae5a5 -r e188a91d3eaa TARGET_LPC4088_DM/LPC407x_8x_177x_8x.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/LPC407x_8x_177x_8x.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1523 @@
+/****************************************************************************************************//**
+* $Id$ LPC407x_8x_177x_8x.h 2012-04-25
+*//**
+ * @file LPC407x_8x_177x_8x.h
+ *
+ * @brief CMSIS Cortex-M4 Cortex-M3 Peripheral Access Layer Header File for
+ * NXP LPC407x_8x_177x_8x.
+ * @version V0.7
+ * @date 20. June 2012
+ * @author NXP MCU SW Application Team
+*
+* Copyright(C) 2012, NXP Semiconductor
+* All rights reserved.
+*
+***********************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+* Permission to use, copy, modify, and distribute this software and its
+* documentation is hereby granted, under NXP Semiconductors'
+* relevant copyright in the software, without fee, provided that it
+* is used in conjunction with NXP Semiconductors microcontrollers. This
+* copyright, permission, and disclaimer notice must appear in all copies of
+* this code.
+**********************************************************************/
+
+#ifndef __LPC407x_8x_177x_8x_H__
+#define __LPC407x_8x_177x_8x_H__
+
+#if defined(__CORTEX_M4) && !defined(CORE_M4)
+ #define CORE_M4
+#endif
+
+// ##################
+// Code Red - excluded extern "C" as unrequired
+// ##################
+#if 0
+#ifdef __cplusplus
+extern "C" {
+#endif
+#endif
+
+
+/* ------------------------- Interrupt Number Definition ------------------------ */
+
+typedef enum IRQn
+{
+/****** Cortex-M4 Processor Exceptions Numbers ***************************************************/
+ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+
+/****** LPC407x_8x_177x_8x Specific Interrupt Numbers *******************************************************/
+ WDT_IRQn = 0, /*!< Watchdog Timer Interrupt */
+ TIMER0_IRQn = 1, /*!< Timer0 Interrupt */
+ TIMER1_IRQn = 2, /*!< Timer1 Interrupt */
+ TIMER2_IRQn = 3, /*!< Timer2 Interrupt */
+ TIMER3_IRQn = 4, /*!< Timer3 Interrupt */
+ UART0_IRQn = 5, /*!< UART0 Interrupt */
+ UART1_IRQn = 6, /*!< UART1 Interrupt */
+ UART2_IRQn = 7, /*!< UART2 Interrupt */
+ UART3_IRQn = 8, /*!< UART3 Interrupt */
+ PWM1_IRQn = 9, /*!< PWM1 Interrupt */
+ I2C0_IRQn = 10, /*!< I2C0 Interrupt */
+ I2C1_IRQn = 11, /*!< I2C1 Interrupt */
+ I2C2_IRQn = 12, /*!< I2C2 Interrupt */
+ Reserved0_IRQn = 13, /*!< Reserved */
+ SSP0_IRQn = 14, /*!< SSP0 Interrupt */
+ SSP1_IRQn = 15, /*!< SSP1 Interrupt */
+ PLL0_IRQn = 16, /*!< PLL0 Lock (Main PLL) Interrupt */
+ RTC_IRQn = 17, /*!< Real Time Clock Interrupt */
+ EINT0_IRQn = 18, /*!< External Interrupt 0 Interrupt */
+ EINT1_IRQn = 19, /*!< External Interrupt 1 Interrupt */
+ EINT2_IRQn = 20, /*!< External Interrupt 2 Interrupt */
+ EINT3_IRQn = 21, /*!< External Interrupt 3 Interrupt */
+ ADC_IRQn = 22, /*!< A/D Converter Interrupt */
+ BOD_IRQn = 23, /*!< Brown-Out Detect Interrupt */
+ USB_IRQn = 24, /*!< USB Interrupt */
+ CAN_IRQn = 25, /*!< CAN Interrupt */
+ DMA_IRQn = 26, /*!< General Purpose DMA Interrupt */
+ I2S_IRQn = 27, /*!< I2S Interrupt */
+ ENET_IRQn = 28, /*!< Ethernet Interrupt */
+ MCI_IRQn = 29, /*!< SD/MMC card I/F Interrupt */
+ MCPWM_IRQn = 30, /*!< Motor Control PWM Interrupt */
+ QEI_IRQn = 31, /*!< Quadrature Encoder Interface Interrupt */
+ PLL1_IRQn = 32, /*!< PLL1 Lock (USB PLL) Interrupt */
+ USBActivity_IRQn = 33, /*!< USB Activity interrupt */
+ CANActivity_IRQn = 34, /*!< CAN Activity interrupt */
+ UART4_IRQn = 35, /*!< UART4 Interrupt */
+ SSP2_IRQn = 36, /*!< SSP2 Interrupt */
+ LCD_IRQn = 37, /*!< LCD Interrupt */
+ GPIO_IRQn = 38, /*!< GPIO Interrupt */
+ PWM0_IRQn = 39, /*!< 39 PWM0 */
+ EEPROM_IRQn = 40, /*!< 40 EEPROM */
+ CMP0_IRQn = 41, /*!< 41 CMP0 */
+ CMP1_IRQn = 42 /*!< 42 CMP1 */
+} IRQn_Type;
+
+/* ================================================================================ */
+/* ================ Processor and Core Peripheral Section ================ */
+/* ================================================================================ */
+#ifdef CORE_M4
+/* ----------------Configuration of the cm4 Processor and Core Peripherals---------------- */
+#define __CM4_REV 0x0000 /*!< Cortex-M4 Core Revision */
+#define __MPU_PRESENT 1 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 5 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1 /*!< FPU present or not */
+
+
+#include "core_cm4.h" /*!< Cortex-M4 processor and core peripherals */
+#else
+/* Configuration of the Cortex-M3 Processor and Core Peripherals */
+#define __MPU_PRESENT 1 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 5 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+
+#include "core_cm3.h" /* Cortex-M3 processor and core peripherals */
+
+#endif
+
+#include "system_LPC407x_8x_177x_8x.h" /*!< LPC408x_7x System */
+
+
+
+
+
+
+/* ================================================================================ */
+/* ================ Device Specific Peripheral Section ================ */
+/* ================================================================================ */
+
+#if defined ( __CC_ARM )
+#pragma anon_unions
+#endif
+
+/*------------- General Purpose Direct Memory Access (GPDMA) -----------------*/
+typedef struct /* Common Registers */
+{
+ __I uint32_t IntStat;
+ __I uint32_t IntTCStat;
+ __O uint32_t IntTCClear;
+ __I uint32_t IntErrStat;
+ __O uint32_t IntErrClr;
+ __I uint32_t RawIntTCStat;
+ __I uint32_t RawIntErrStat;
+ __I uint32_t EnbldChns;
+ __IO uint32_t SoftBReq;
+ __IO uint32_t SoftSReq;
+ __IO uint32_t SoftLBReq;
+ __IO uint32_t SoftLSReq;
+ __IO uint32_t Config;
+ __IO uint32_t Sync;
+} LPC_GPDMA_TypeDef;
+
+typedef struct /* Channel Registers */
+{
+ __IO uint32_t CSrcAddr;
+ __IO uint32_t CDestAddr;
+ __IO uint32_t CLLI;
+ __IO uint32_t CControl;
+ __IO uint32_t CConfig;
+} LPC_GPDMACH_TypeDef;
+
+/*------------- System Control (SC) ------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t FLASHCFG; /*!< Offset: 0x000 (R/W) Flash Accelerator Configuration Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t PLL0CON; /*!< Offset: 0x080 (R/W) PLL0 Control Register */
+ __IO uint32_t PLL0CFG; /*!< Offset: 0x084 (R/W) PLL0 Configuration Register */
+ __I uint32_t PLL0STAT; /*!< Offset: 0x088 (R/ ) PLL0 Status Register */
+ __O uint32_t PLL0FEED; /*!< Offset: 0x08C ( /W) PLL0 Feed Register */
+ uint32_t RESERVED1[4];
+ __IO uint32_t PLL1CON; /*!< Offset: 0x0A0 (R/W) PLL1 Control Register */
+ __IO uint32_t PLL1CFG; /*!< Offset: 0x0A4 (R/W) PLL1 Configuration Register */
+ __I uint32_t PLL1STAT; /*!< Offset: 0x0A8 (R/ ) PLL1 Status Register */
+ __O uint32_t PLL1FEED; /*!< Offset: 0x0AC ( /W) PLL1 Feed Register */
+ uint32_t RESERVED2[4];
+ __IO uint32_t PCON; /*!< Offset: 0x0C0 (R/W) Power Control Register */
+ __IO uint32_t PCONP; /*!< Offset: 0x0C4 (R/W) Power Control for Peripherals Register */
+ __IO uint32_t PCONP1; /*!< Offset: 0x0C8 (R/W) Power Control for Peripherals Register */
+ uint32_t RESERVED3[13];
+ __IO uint32_t EMCCLKSEL; /*!< Offset: 0x100 (R/W) External Memory Controller Clock Selection Register */
+ __IO uint32_t CCLKSEL; /*!< Offset: 0x104 (R/W) CPU Clock Selection Register */
+ __IO uint32_t USBCLKSEL; /*!< Offset: 0x108 (R/W) USB Clock Selection Register */
+ __IO uint32_t CLKSRCSEL; /*!< Offset: 0x10C (R/W) Clock Source Select Register */
+ __IO uint32_t CANSLEEPCLR; /*!< Offset: 0x110 (R/W) CAN Sleep Clear Register */
+ __IO uint32_t CANWAKEFLAGS; /*!< Offset: 0x114 (R/W) CAN Wake-up Flags Register */
+ uint32_t RESERVED4[10];
+ __IO uint32_t EXTINT; /*!< Offset: 0x140 (R/W) External Interrupt Flag Register */
+ uint32_t RESERVED5[1];
+ __IO uint32_t EXTMODE; /*!< Offset: 0x148 (R/W) External Interrupt Mode Register */
+ __IO uint32_t EXTPOLAR; /*!< Offset: 0x14C (R/W) External Interrupt Polarity Register */
+ uint32_t RESERVED6[12];
+ __IO uint32_t RSID; /*!< Offset: 0x180 (R/W) Reset Source Identification Register */
+ uint32_t RESERVED7[7];
+ __IO uint32_t SCS; /*!< Offset: 0x1A0 (R/W) System Controls and Status Register */
+ __IO uint32_t IRCTRIM; /*!< Offset: 0x1A4 (R/W) Clock Dividers */
+ __IO uint32_t PCLKSEL; /*!< Offset: 0x1A8 (R/W) Peripheral Clock Selection Register */
+ uint32_t RESERVED8;
+ __IO uint32_t PBOOST; /*!< Offset: 0x1B0 (R/W) Power Boost control register */
+ __IO uint32_t SPIFICLKSEL;
+ __IO uint32_t LCD_CFG; /*!< Offset: 0x1B8 (R/W) LCD Configuration and clocking control Register */
+ uint32_t RESERVED10[1];
+ __IO uint32_t USBIntSt; /*!< Offset: 0x1C0 (R/W) USB Interrupt Status Register */
+ __IO uint32_t DMAREQSEL; /*!< Offset: 0x1C4 (R/W) DMA Request Select Register */
+ __IO uint32_t CLKOUTCFG; /*!< Offset: 0x1C8 (R/W) Clock Output Configuration Register */
+ __IO uint32_t RSTCON0; /*!< Offset: 0x1CC (R/W) RESET Control0 Register */
+ __IO uint32_t RSTCON1; /*!< Offset: 0x1D0 (R/W) RESET Control1 Register */
+ uint32_t RESERVED11[2];
+ __IO uint32_t EMCDLYCTL; /*!< Offset: 0x1DC (R/W) SDRAM programmable delays */
+ __IO uint32_t EMCCAL; /*!< Offset: 0x1E0 (R/W) Calibration of programmable delays */
+ } LPC_SC_TypeDef;
+/*------------- Ethernet Media Access Controller (EMAC) ----------------------*/
+typedef struct
+{
+ __IO uint32_t MAC1; /* MAC Registers */
+ __IO uint32_t MAC2;
+ __IO uint32_t IPGT;
+ __IO uint32_t IPGR;
+ __IO uint32_t CLRT;
+ __IO uint32_t MAXF;
+ __IO uint32_t SUPP;
+ __IO uint32_t TEST;
+ __IO uint32_t MCFG;
+ __IO uint32_t MCMD;
+ __IO uint32_t MADR;
+ __O uint32_t MWTD;
+ __I uint32_t MRDD;
+ __I uint32_t MIND;
+ uint32_t RESERVED0[2];
+ __IO uint32_t SA0;
+ __IO uint32_t SA1;
+ __IO uint32_t SA2;
+ uint32_t RESERVED1[45];
+ __IO uint32_t Command; /* Control Registers */
+ __I uint32_t Status;
+ __IO uint32_t RxDescriptor;
+ __IO uint32_t RxStatus;
+ __IO uint32_t RxDescriptorNumber;
+ __I uint32_t RxProduceIndex;
+ __IO uint32_t RxConsumeIndex;
+ __IO uint32_t TxDescriptor;
+ __IO uint32_t TxStatus;
+ __IO uint32_t TxDescriptorNumber;
+ __IO uint32_t TxProduceIndex;
+ __I uint32_t TxConsumeIndex;
+ uint32_t RESERVED2[10];
+ __I uint32_t TSV0;
+ __I uint32_t TSV1;
+ __I uint32_t RSV;
+ uint32_t RESERVED3[3];
+ __IO uint32_t FlowControlCounter;
+ __I uint32_t FlowControlStatus;
+ uint32_t RESERVED4[34];
+ __IO uint32_t RxFilterCtrl; /* Rx Filter Registers */
+ __I uint32_t RxFilterWoLStatus;
+ __O uint32_t RxFilterWoLClear;
+ uint32_t RESERVED5;
+ __IO uint32_t HashFilterL;
+ __IO uint32_t HashFilterH;
+ uint32_t RESERVED6[882];
+ __I uint32_t IntStatus; /* Module Control Registers */
+ __IO uint32_t IntEnable;
+ __O uint32_t IntClear;
+ __O uint32_t IntSet;
+ uint32_t RESERVED7;
+ __IO uint32_t PowerDown;
+ uint32_t RESERVED8;
+ __IO uint32_t Module_ID;
+} LPC_EMAC_TypeDef;
+
+/*------------- LCD controller (LCD) -----------------------------------------*/
+typedef struct
+{
+ __IO uint32_t TIMH; /* LCD Registers */
+ __IO uint32_t TIMV;
+ __IO uint32_t POL;
+ __IO uint32_t LE;
+ __IO uint32_t UPBASE;
+ __IO uint32_t LPBASE;
+ __IO uint32_t CTRL;
+ __IO uint32_t INTMSK;
+ __I uint32_t INTRAW;
+ __I uint32_t INTSTAT;
+ __O uint32_t INTCLR;
+ __I uint32_t UPCURR;
+ __I uint32_t LPCURR;
+ uint32_t RESERVED0[115];
+ __IO uint32_t PAL[128];
+ uint32_t RESERVED1[256];
+ __IO uint32_t CRSR_IMG[256];
+ __IO uint32_t CRSR_CTRL;
+ __IO uint32_t CRSR_CFG;
+ __IO uint32_t CRSR_PAL0;
+ __IO uint32_t CRSR_PAL1;
+ __IO uint32_t CRSR_XY;
+ __IO uint32_t CRSR_CLIP;
+ uint32_t RESERVED2[2];
+ __IO uint32_t CRSR_INTMSK;
+ __O uint32_t CRSR_INTCLR;
+ __I uint32_t CRSR_INTRAW;
+ __I uint32_t CRSR_INTSTAT;
+} LPC_LCD_TypeDef;
+
+/*------------- Universal Serial Bus (USB) -----------------------------------*/
+typedef struct
+{
+ __I uint32_t Revision; /* USB Host Registers */
+ __IO uint32_t Control;
+ __IO uint32_t CommandStatus;
+ __IO uint32_t InterruptStatus;
+ __IO uint32_t InterruptEnable;
+ __IO uint32_t InterruptDisable;
+ __IO uint32_t HCCA;
+ __I uint32_t PeriodCurrentED;
+ __IO uint32_t ControlHeadED;
+ __IO uint32_t ControlCurrentED;
+ __IO uint32_t BulkHeadED;
+ __IO uint32_t BulkCurrentED;
+ __I uint32_t DoneHead;
+ __IO uint32_t FmInterval;
+ __I uint32_t FmRemaining;
+ __I uint32_t FmNumber;
+ __IO uint32_t PeriodicStart;
+ __IO uint32_t LSTreshold;
+ __IO uint32_t RhDescriptorA;
+ __IO uint32_t RhDescriptorB;
+ __IO uint32_t RhStatus;
+ __IO uint32_t RhPortStatus1;
+ __IO uint32_t RhPortStatus2;
+ uint32_t RESERVED0[40];
+ __I uint32_t Module_ID;
+
+ __I uint32_t IntSt; /* USB On-The-Go Registers */
+ __IO uint32_t IntEn;
+ __O uint32_t IntSet;
+ __O uint32_t IntClr;
+ __IO uint32_t StCtrl;
+ __IO uint32_t Tmr;
+ uint32_t RESERVED1[58];
+
+ __I uint32_t DevIntSt; /* USB Device Interrupt Registers */
+ __IO uint32_t DevIntEn;
+ __O uint32_t DevIntClr;
+ __O uint32_t DevIntSet;
+
+ __O uint32_t CmdCode; /* USB Device SIE Command Registers */
+ __I uint32_t CmdData;
+
+ __I uint32_t RxData; /* USB Device Transfer Registers */
+ __O uint32_t TxData;
+ __I uint32_t RxPLen;
+ __O uint32_t TxPLen;
+ __IO uint32_t Ctrl;
+ __O uint32_t DevIntPri;
+
+ __I uint32_t EpIntSt; /* USB Device Endpoint Interrupt Regs */
+ __IO uint32_t EpIntEn;
+ __O uint32_t EpIntClr;
+ __O uint32_t EpIntSet;
+ __O uint32_t EpIntPri;
+
+ __IO uint32_t ReEp; /* USB Device Endpoint Realization Reg*/
+ __O uint32_t EpInd;
+ __IO uint32_t MaxPSize;
+
+ __I uint32_t DMARSt; /* USB Device DMA Registers */
+ __O uint32_t DMARClr;
+ __O uint32_t DMARSet;
+ uint32_t RESERVED2[9];
+ __IO uint32_t UDCAH;
+ __I uint32_t EpDMASt;
+ __O uint32_t EpDMAEn;
+ __O uint32_t EpDMADis;
+ __I uint32_t DMAIntSt;
+ __IO uint32_t DMAIntEn;
+ uint32_t RESERVED3[2];
+ __I uint32_t EoTIntSt;
+ __O uint32_t EoTIntClr;
+ __O uint32_t EoTIntSet;
+ __I uint32_t NDDRIntSt;
+ __O uint32_t NDDRIntClr;
+ __O uint32_t NDDRIntSet;
+ __I uint32_t SysErrIntSt;
+ __O uint32_t SysErrIntClr;
+ __O uint32_t SysErrIntSet;
+ uint32_t RESERVED4[15];
+
+ union {
+ __I uint32_t I2C_RX; /* USB OTG I2C Registers */
+ __O uint32_t I2C_TX;
+ };
+ __IO uint32_t I2C_STS;
+ __IO uint32_t I2C_CTL;
+ __IO uint32_t I2C_CLKHI;
+ __O uint32_t I2C_CLKLO;
+ uint32_t RESERVED5[824];
+
+ union {
+ __IO uint32_t USBClkCtrl; /* USB Clock Control Registers */
+ __IO uint32_t OTGClkCtrl;
+ };
+ union {
+ __I uint32_t USBClkSt;
+ __I uint32_t OTGClkSt;
+ };
+} LPC_USB_TypeDef;
+
+/*------------- CRC Engine (CRC) -----------------------------------------*/
+typedef struct
+{
+ __IO uint32_t MODE;
+ __IO uint32_t SEED;
+ union {
+ __I uint32_t SUM;
+ struct {
+ __O uint32_t DATA;
+ } WR_DATA_DWORD;
+
+ struct {
+ __O uint16_t DATA;
+ uint16_t RESERVED;
+ }WR_DATA_WORD;
+
+ struct {
+ __O uint8_t DATA;
+ uint8_t RESERVED[3];
+ }WR_DATA_BYTE;
+ };
+} LPC_CRC_TypeDef;
+/*------------- General Purpose Input/Output (GPIO) --------------------------*/
+typedef struct
+{
+ __IO uint32_t DIR;
+ uint32_t RESERVED0[3];
+ __IO uint32_t MASK;
+ __IO uint32_t PIN;
+ __IO uint32_t SET;
+ __O uint32_t CLR;
+} LPC_GPIO_TypeDef;
+
+typedef struct
+{
+ __I uint32_t IntStatus;
+ __I uint32_t IO0IntStatR;
+ __I uint32_t IO0IntStatF;
+ __O uint32_t IO0IntClr;
+ __IO uint32_t IO0IntEnR;
+ __IO uint32_t IO0IntEnF;
+ uint32_t RESERVED0[3];
+ __I uint32_t IO2IntStatR;
+ __I uint32_t IO2IntStatF;
+ __O uint32_t IO2IntClr;
+ __IO uint32_t IO2IntEnR;
+ __IO uint32_t IO2IntEnF;
+} LPC_GPIOINT_TypeDef;
+
+/*------------- External Memory Controller (EMC) -----------------------------*/
+typedef struct
+{
+ __IO uint32_t Control;
+ __I uint32_t Status;
+ __IO uint32_t Config;
+ uint32_t RESERVED0[5];
+ __IO uint32_t DynamicControl;
+ __IO uint32_t DynamicRefresh;
+ __IO uint32_t DynamicReadConfig;
+ uint32_t RESERVED1[1];
+ __IO uint32_t DynamicRP;
+ __IO uint32_t DynamicRAS;
+ __IO uint32_t DynamicSREX;
+ __IO uint32_t DynamicAPR;
+ __IO uint32_t DynamicDAL;
+ __IO uint32_t DynamicWR;
+ __IO uint32_t DynamicRC;
+ __IO uint32_t DynamicRFC;
+ __IO uint32_t DynamicXSR;
+ __IO uint32_t DynamicRRD;
+ __IO uint32_t DynamicMRD;
+ uint32_t RESERVED2[9];
+ __IO uint32_t StaticExtendedWait;
+ uint32_t RESERVED3[31];
+ __IO uint32_t DynamicConfig0;
+ __IO uint32_t DynamicRasCas0;
+ uint32_t RESERVED4[6];
+ __IO uint32_t DynamicConfig1;
+ __IO uint32_t DynamicRasCas1;
+ uint32_t RESERVED5[6];
+ __IO uint32_t DynamicConfig2;
+ __IO uint32_t DynamicRasCas2;
+ uint32_t RESERVED6[6];
+ __IO uint32_t DynamicConfig3;
+ __IO uint32_t DynamicRasCas3;
+ uint32_t RESERVED7[38];
+ __IO uint32_t StaticConfig0;
+ __IO uint32_t StaticWaitWen0;
+ __IO uint32_t StaticWaitOen0;
+ __IO uint32_t StaticWaitRd0;
+ __IO uint32_t StaticWaitPage0;
+ __IO uint32_t StaticWaitWr0;
+ __IO uint32_t StaticWaitTurn0;
+ uint32_t RESERVED8[1];
+ __IO uint32_t StaticConfig1;
+ __IO uint32_t StaticWaitWen1;
+ __IO uint32_t StaticWaitOen1;
+ __IO uint32_t StaticWaitRd1;
+ __IO uint32_t StaticWaitPage1;
+ __IO uint32_t StaticWaitWr1;
+ __IO uint32_t StaticWaitTurn1;
+ uint32_t RESERVED9[1];
+ __IO uint32_t StaticConfig2;
+ __IO uint32_t StaticWaitWen2;
+ __IO uint32_t StaticWaitOen2;
+ __IO uint32_t StaticWaitRd2;
+ __IO uint32_t StaticWaitPage2;
+ __IO uint32_t StaticWaitWr2;
+ __IO uint32_t StaticWaitTurn2;
+ uint32_t RESERVED10[1];
+ __IO uint32_t StaticConfig3;
+ __IO uint32_t StaticWaitWen3;
+ __IO uint32_t StaticWaitOen3;
+ __IO uint32_t StaticWaitRd3;
+ __IO uint32_t StaticWaitPage3;
+ __IO uint32_t StaticWaitWr3;
+ __IO uint32_t StaticWaitTurn3;
+} LPC_EMC_TypeDef;
+
+/*------------- Watchdog Timer (WDT) -----------------------------------------*/
+typedef struct
+{
+ __IO uint8_t MOD;
+ uint8_t RESERVED0[3];
+ __IO uint32_t TC;
+ __O uint8_t FEED;
+ uint8_t RESERVED1[3];
+ __I uint32_t TV;
+ uint32_t RESERVED2;
+ __IO uint32_t WARNINT;
+ __IO uint32_t WINDOW;
+} LPC_WDT_TypeDef;
+
+/*------------- Timer (TIM) --------------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t IR; /*!< Offset: 0x000 Interrupt Register (R/W) */
+ __IO uint32_t TCR; /*!< Offset: 0x004 Timer Control Register (R/W) */
+ __IO uint32_t TC; /*!< Offset: 0x008 Timer Counter Register (R/W) */
+ __IO uint32_t PR; /*!< Offset: 0x00C Prescale Register (R/W) */
+ __IO uint32_t PC; /*!< Offset: 0x010 Prescale Counter Register (R/W) */
+ __IO uint32_t MCR; /*!< Offset: 0x014 Match Control Register (R/W) */
+ __IO uint32_t MR0; /*!< Offset: 0x018 Match Register 0 (R/W) */
+ __IO uint32_t MR1; /*!< Offset: 0x01C Match Register 1 (R/W) */
+ __IO uint32_t MR2; /*!< Offset: 0x020 Match Register 2 (R/W) */
+ __IO uint32_t MR3; /*!< Offset: 0x024 Match Register 3 (R/W) */
+ __IO uint32_t CCR; /*!< Offset: 0x028 Capture Control Register (R/W) */
+ __I uint32_t CR0; /*!< Offset: 0x02C Capture Register 0 (R/ ) */
+ __I uint32_t CR1; /*!< Offset: 0x030 Capture Register 1 (R/ ) */
+ uint32_t RESERVED0[2];
+ __IO uint32_t EMR; /*!< Offset: 0x03C External Match Register (R/W) */
+ uint32_t RESERVED1[12];
+ __IO uint32_t CTCR; /*!< Offset: 0x070 Count Control Register (R/W) */
+} LPC_TIM_TypeDef;
+
+
+/*------------- Pulse-Width Modulation (PWM) ---------------------------------*/
+typedef struct
+{
+ __IO uint32_t IR; /*!< Offset: 0x000 Interrupt Register (R/W) */
+ __IO uint32_t TCR; /*!< Offset: 0x004 Timer Control Register (R/W) */
+ __IO uint32_t TC; /*!< Offset: 0x008 Timer Counter Register (R/W) */
+ __IO uint32_t PR; /*!< Offset: 0x00C Prescale Register (R/W) */
+ __IO uint32_t PC; /*!< Offset: 0x010 Prescale Counter Register (R/W) */
+ __IO uint32_t MCR; /*!< Offset: 0x014 Match Control Register (R/W) */
+ __IO uint32_t MR0; /*!< Offset: 0x018 Match Register 0 (R/W) */
+ __IO uint32_t MR1; /*!< Offset: 0x01C Match Register 1 (R/W) */
+ __IO uint32_t MR2; /*!< Offset: 0x020 Match Register 2 (R/W) */
+ __IO uint32_t MR3; /*!< Offset: 0x024 Match Register 3 (R/W) */
+ __IO uint32_t CCR; /*!< Offset: 0x028 Capture Control Register (R/W) */
+ __I uint32_t CR0; /*!< Offset: 0x02C Capture Register 0 (R/ ) */
+ __I uint32_t CR1; /*!< Offset: 0x030 Capture Register 1 (R/ ) */
+ __I uint32_t CR2; /*!< Offset: 0x034 Capture Register 2 (R/ ) */
+ __I uint32_t CR3; /*!< Offset: 0x038 Capture Register 3 (R/ ) */
+ uint32_t RESERVED0;
+ __IO uint32_t MR4; /*!< Offset: 0x040 Match Register 4 (R/W) */
+ __IO uint32_t MR5; /*!< Offset: 0x044 Match Register 5 (R/W) */
+ __IO uint32_t MR6; /*!< Offset: 0x048 Match Register 6 (R/W) */
+ __IO uint32_t PCR; /*!< Offset: 0x04C PWM Control Register (R/W) */
+ __IO uint32_t LER; /*!< Offset: 0x050 Load Enable Register (R/W) */
+ uint32_t RESERVED1[7];
+ __IO uint32_t CTCR; /*!< Offset: 0x070 Counter Control Register (R/W) */
+} LPC_PWM_TypeDef;
+
+/*------------- Universal Asynchronous Receiver Transmitter (UARTx) -----------*/
+/* There are three types of UARTs on the chip:
+(1) UART0,UART2, and UART3 are the standard UART.
+(2) UART1 is the standard with modem capability.
+(3) USART(UART4) is the sync/async UART with smart card capability.
+More details can be found on the Users Manual. */
+
+#if 0
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[7];
+ __I uint8_t LSR;
+ uint8_t RESERVED2[7];
+ __IO uint8_t SCR;
+ uint8_t RESERVED3[3];
+ __IO uint32_t ACR;
+ __IO uint8_t ICR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t FDR;
+ uint8_t RESERVED5[7];
+ __IO uint8_t TER;
+ uint8_t RESERVED6[39];
+ __I uint8_t FIFOLVL;
+} LPC_UART_TypeDef;
+#else
+typedef struct
+{
+ union
+ {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union
+ {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union
+ {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[7];//Reserved
+ __I uint8_t LSR;
+ uint8_t RESERVED2[7];//Reserved
+ __IO uint8_t SCR;
+ uint8_t RESERVED3[3];//Reserved
+ __IO uint32_t ACR;
+ __IO uint8_t ICR;
+ uint8_t RESERVED4[3];//Reserved
+ __IO uint8_t FDR;
+ uint8_t RESERVED5[7];//Reserved
+ __IO uint8_t TER;
+ uint8_t RESERVED8[27];//Reserved
+ __IO uint8_t RS485CTRL;
+ uint8_t RESERVED9[3];//Reserved
+ __IO uint8_t ADRMATCH;
+ uint8_t RESERVED10[3];//Reserved
+ __IO uint8_t RS485DLY;
+ uint8_t RESERVED11[3];//Reserved
+ __I uint8_t FIFOLVL;
+}LPC_UART_TypeDef;
+#endif
+
+
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[3];
+ __IO uint8_t MCR;
+ uint8_t RESERVED2[3];
+ __I uint8_t LSR;
+ uint8_t RESERVED3[3];
+ __I uint8_t MSR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t SCR;
+ uint8_t RESERVED5[3];
+ __IO uint32_t ACR;
+ uint32_t RESERVED6;
+ __IO uint32_t FDR;
+ uint32_t RESERVED7;
+ __IO uint8_t TER;
+ uint8_t RESERVED8[27];
+ __IO uint8_t RS485CTRL;
+ uint8_t RESERVED9[3];
+ __IO uint8_t ADRMATCH;
+ uint8_t RESERVED10[3];
+ __IO uint8_t RS485DLY;
+ uint8_t RESERVED11[3];
+ __I uint8_t FIFOLVL;
+} LPC_UART1_TypeDef;
+
+typedef struct
+{
+ union {
+ __I uint32_t RBR; /*!< Offset: 0x000 Receiver Buffer Register (R/ ) */
+ __O uint32_t THR; /*!< Offset: 0x000 Transmit Holding Register ( /W) */
+ __IO uint32_t DLL; /*!< Offset: 0x000 Divisor Latch LSB (R/W) */
+ };
+ union {
+ __IO uint32_t DLM; /*!< Offset: 0x004 Divisor Latch MSB (R/W) */
+ __IO uint32_t IER; /*!< Offset: 0x000 Interrupt Enable Register (R/W) */
+ };
+ union {
+ __I uint32_t IIR; /*!< Offset: 0x008 Interrupt ID Register (R/ ) */
+ __O uint32_t FCR; /*!< Offset: 0x008 FIFO Control Register ( /W) */
+ };
+ __IO uint32_t LCR; /*!< Offset: 0x00C Line Control Register (R/W) */
+ __IO uint32_t MCR; /*!< Offset: 0x010 Modem control Register (R/W) */
+ __I uint32_t LSR; /*!< Offset: 0x014 Line Status Register (R/ ) */
+ __I uint32_t MSR; /*!< Offset: 0x018 Modem status Register (R/ ) */
+ __IO uint32_t SCR; /*!< Offset: 0x01C Scratch Pad Register (R/W) */
+ __IO uint32_t ACR; /*!< Offset: 0x020 Auto-baud Control Register (R/W) */
+ __IO uint32_t ICR; /*!< Offset: 0x024 irDA Control Register (R/W) */
+ __IO uint32_t FDR; /*!< Offset: 0x028 Fractional Divider Register (R/W) */
+ __IO uint32_t OSR; /*!< Offset: 0x02C Over sampling Register (R/W) */
+ __O uint32_t POP; /*!< Offset: 0x030 NHP Pop Register (W) */
+ __IO uint32_t MODE; /*!< Offset: 0x034 NHP Mode selection Register (W) */
+ uint32_t RESERVED0[2];
+ __IO uint32_t HDEN; /*!< Offset: 0x040 Half duplex Enable Register (R/W) */
+ uint32_t RESERVED1;
+ __IO uint32_t SCI_CTRL; /*!< Offset: 0x048 Smart card Interface Control Register (R/W) */
+ __IO uint32_t RS485CTRL; /*!< Offset: 0x04C RS-485/EIA-485 Control Register (R/W) */
+ __IO uint32_t ADRMATCH; /*!< Offset: 0x050 RS-485/EIA-485 address match Register (R/W) */
+ __IO uint32_t RS485DLY; /*!< Offset: 0x054 RS-485/EIA-485 direction control delay Register (R/W) */
+ __IO uint32_t SYNCCTRL; /*!< Offset: 0x058 Synchronous Mode Control Register (R/W ) */
+ __IO uint32_t TER; /*!< Offset: 0x05C Transmit Enable Register (R/W) */
+ uint32_t RESERVED2[989];
+ __I uint32_t CFG; /*!< Offset: 0xFD4 Configuration Register (R) */
+ __O uint32_t INTCE; /*!< Offset: 0xFD8 Interrupt Clear Enable Register (W) */
+ __O uint32_t INTSE; /*!< Offset: 0xFDC Interrupt Set Enable Register (W) */
+ __I uint32_t INTS; /*!< Offset: 0xFE0 Interrupt Status Register (R) */
+ __I uint32_t INTE; /*!< Offset: 0xFE4 Interrupt Enable Register (R) */
+ __O uint32_t INTCS; /*!< Offset: 0xFE8 Interrupt Clear Status Register (W) */
+ __O uint32_t INTSS; /*!< Offset: 0xFEC Interrupt Set Status Register (W) */
+ uint32_t RESERVED3[3];
+ __I uint32_t MID; /*!< Offset: 0xFFC Module Identification Register (R) */
+} LPC_UART4_TypeDef;
+/*------------- Inter-Integrated Circuit (I2C) -------------------------------*/
+typedef struct
+{
+ __IO uint32_t CONSET; /*!< Offset: 0x000 I2C Control Set Register (R/W) */
+ __I uint32_t STAT; /*!< Offset: 0x004 I2C Status Register (R/ ) */
+ __IO uint32_t DAT; /*!< Offset: 0x008 I2C Data Register (R/W) */
+ __IO uint32_t ADR0; /*!< Offset: 0x00C I2C Slave Address Register 0 (R/W) */
+ __IO uint32_t SCLH; /*!< Offset: 0x010 SCH Duty Cycle Register High Half Word (R/W) */
+ __IO uint32_t SCLL; /*!< Offset: 0x014 SCL Duty Cycle Register Low Half Word (R/W) */
+ __O uint32_t CONCLR; /*!< Offset: 0x018 I2C Control Clear Register ( /W) */
+ __IO uint32_t MMCTRL; /*!< Offset: 0x01C Monitor mode control register (R/W) */
+ __IO uint32_t ADR1; /*!< Offset: 0x020 I2C Slave Address Register 1 (R/W) */
+ __IO uint32_t ADR2; /*!< Offset: 0x024 I2C Slave Address Register 2 (R/W) */
+ __IO uint32_t ADR3; /*!< Offset: 0x028 I2C Slave Address Register 3 (R/W) */
+ __I uint32_t DATA_BUFFER; /*!< Offset: 0x02C Data buffer register ( /W) */
+ __IO uint32_t MASK0; /*!< Offset: 0x030 I2C Slave address mask register 0 (R/W) */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 I2C Slave address mask register 1 (R/W) */
+ __IO uint32_t MASK2; /*!< Offset: 0x038 I2C Slave address mask register 2 (R/W) */
+ __IO uint32_t MASK3; /*!< Offset: 0x03C I2C Slave address mask register 3 (R/W) */
+} LPC_I2C_TypeDef;
+
+/*------------- Real-Time Clock (RTC) ----------------------------------------*/
+typedef struct
+{
+ __IO uint8_t ILR;
+ uint8_t RESERVED0[7];
+ __IO uint8_t CCR;
+ uint8_t RESERVED1[3];
+ __IO uint8_t CIIR;
+ uint8_t RESERVED2[3];
+ __IO uint8_t AMR;
+ uint8_t RESERVED3[3];
+ __I uint32_t CTIME0;
+ __I uint32_t CTIME1;
+ __I uint32_t CTIME2;
+ __IO uint8_t SEC;
+ uint8_t RESERVED4[3];
+ __IO uint8_t MIN;
+ uint8_t RESERVED5[3];
+ __IO uint8_t HOUR;
+ uint8_t RESERVED6[3];
+ __IO uint8_t DOM;
+ uint8_t RESERVED7[3];
+ __IO uint8_t DOW;
+ uint8_t RESERVED8[3];
+ __IO uint16_t DOY;
+ uint16_t RESERVED9;
+ __IO uint8_t MONTH;
+ uint8_t RESERVED10[3];
+ __IO uint16_t YEAR;
+ uint16_t RESERVED11;
+ __IO uint32_t CALIBRATION;
+ __IO uint32_t GPREG0;
+ __IO uint32_t GPREG1;
+ __IO uint32_t GPREG2;
+ __IO uint32_t GPREG3;
+ __IO uint32_t GPREG4;
+ __IO uint8_t RTC_AUXEN;
+ uint8_t RESERVED12[3];
+ __IO uint8_t RTC_AUX;
+ uint8_t RESERVED13[3];
+ __IO uint8_t ALSEC;
+ uint8_t RESERVED14[3];
+ __IO uint8_t ALMIN;
+ uint8_t RESERVED15[3];
+ __IO uint8_t ALHOUR;
+ uint8_t RESERVED16[3];
+ __IO uint8_t ALDOM;
+ uint8_t RESERVED17[3];
+ __IO uint8_t ALDOW;
+ uint8_t RESERVED18[3];
+ __IO uint16_t ALDOY;
+ uint16_t RESERVED19;
+ __IO uint8_t ALMON;
+ uint8_t RESERVED20[3];
+ __IO uint16_t ALYEAR;
+ uint16_t RESERVED21;
+ __IO uint32_t ERSTATUS;
+ __IO uint32_t ERCONTROL;
+ __IO uint32_t ERCOUNTERS;
+ uint32_t RESERVED22;
+ __IO uint32_t ERFIRSTSTAMP0;
+ __IO uint32_t ERFIRSTSTAMP1;
+ __IO uint32_t ERFIRSTSTAMP2;
+ uint32_t RESERVED23;
+ __IO uint32_t ERLASTSTAMP0;
+ __IO uint32_t ERLASTSTAMP1;
+ __IO uint32_t ERLASTSTAMP2;
+} LPC_RTC_TypeDef;
+
+
+
+/*------------- Pin Connect Block (PINCON) -----------------------------------*/
+typedef struct
+{
+ __IO uint32_t P0_0; /* 0x000 */
+ __IO uint32_t P0_1;
+ __IO uint32_t P0_2;
+ __IO uint32_t P0_3;
+ __IO uint32_t P0_4;
+ __IO uint32_t P0_5;
+ __IO uint32_t P0_6;
+ __IO uint32_t P0_7;
+
+ __IO uint32_t P0_8; /* 0x020 */
+ __IO uint32_t P0_9;
+ __IO uint32_t P0_10;
+ __IO uint32_t P0_11;
+ __IO uint32_t P0_12;
+ __IO uint32_t P0_13;
+ __IO uint32_t P0_14;
+ __IO uint32_t P0_15;
+
+ __IO uint32_t P0_16; /* 0x040 */
+ __IO uint32_t P0_17;
+ __IO uint32_t P0_18;
+ __IO uint32_t P0_19;
+ __IO uint32_t P0_20;
+ __IO uint32_t P0_21;
+ __IO uint32_t P0_22;
+ __IO uint32_t P0_23;
+
+ __IO uint32_t P0_24; /* 0x060 */
+ __IO uint32_t P0_25;
+ __IO uint32_t P0_26;
+ __IO uint32_t P0_27;
+ __IO uint32_t P0_28;
+ __IO uint32_t P0_29;
+ __IO uint32_t P0_30;
+ __IO uint32_t P0_31;
+
+ __IO uint32_t P1_0; /* 0x080 */
+ __IO uint32_t P1_1;
+ __IO uint32_t P1_2;
+ __IO uint32_t P1_3;
+ __IO uint32_t P1_4;
+ __IO uint32_t P1_5;
+ __IO uint32_t P1_6;
+ __IO uint32_t P1_7;
+
+ __IO uint32_t P1_8; /* 0x0A0 */
+ __IO uint32_t P1_9;
+ __IO uint32_t P1_10;
+ __IO uint32_t P1_11;
+ __IO uint32_t P1_12;
+ __IO uint32_t P1_13;
+ __IO uint32_t P1_14;
+ __IO uint32_t P1_15;
+
+ __IO uint32_t P1_16; /* 0x0C0 */
+ __IO uint32_t P1_17;
+ __IO uint32_t P1_18;
+ __IO uint32_t P1_19;
+ __IO uint32_t P1_20;
+ __IO uint32_t P1_21;
+ __IO uint32_t P1_22;
+ __IO uint32_t P1_23;
+
+ __IO uint32_t P1_24; /* 0x0E0 */
+ __IO uint32_t P1_25;
+ __IO uint32_t P1_26;
+ __IO uint32_t P1_27;
+ __IO uint32_t P1_28;
+ __IO uint32_t P1_29;
+ __IO uint32_t P1_30;
+ __IO uint32_t P1_31;
+
+ __IO uint32_t P2_0; /* 0x100 */
+ __IO uint32_t P2_1;
+ __IO uint32_t P2_2;
+ __IO uint32_t P2_3;
+ __IO uint32_t P2_4;
+ __IO uint32_t P2_5;
+ __IO uint32_t P2_6;
+ __IO uint32_t P2_7;
+
+ __IO uint32_t P2_8; /* 0x120 */
+ __IO uint32_t P2_9;
+ __IO uint32_t P2_10;
+ __IO uint32_t P2_11;
+ __IO uint32_t P2_12;
+ __IO uint32_t P2_13;
+ __IO uint32_t P2_14;
+ __IO uint32_t P2_15;
+
+ __IO uint32_t P2_16; /* 0x140 */
+ __IO uint32_t P2_17;
+ __IO uint32_t P2_18;
+ __IO uint32_t P2_19;
+ __IO uint32_t P2_20;
+ __IO uint32_t P2_21;
+ __IO uint32_t P2_22;
+ __IO uint32_t P2_23;
+
+ __IO uint32_t P2_24; /* 0x160 */
+ __IO uint32_t P2_25;
+ __IO uint32_t P2_26;
+ __IO uint32_t P2_27;
+ __IO uint32_t P2_28;
+ __IO uint32_t P2_29;
+ __IO uint32_t P2_30;
+ __IO uint32_t P2_31;
+
+ __IO uint32_t P3_0; /* 0x180 */
+ __IO uint32_t P3_1;
+ __IO uint32_t P3_2;
+ __IO uint32_t P3_3;
+ __IO uint32_t P3_4;
+ __IO uint32_t P3_5;
+ __IO uint32_t P3_6;
+ __IO uint32_t P3_7;
+
+ __IO uint32_t P3_8; /* 0x1A0 */
+ __IO uint32_t P3_9;
+ __IO uint32_t P3_10;
+ __IO uint32_t P3_11;
+ __IO uint32_t P3_12;
+ __IO uint32_t P3_13;
+ __IO uint32_t P3_14;
+ __IO uint32_t P3_15;
+
+ __IO uint32_t P3_16; /* 0x1C0 */
+ __IO uint32_t P3_17;
+ __IO uint32_t P3_18;
+ __IO uint32_t P3_19;
+ __IO uint32_t P3_20;
+ __IO uint32_t P3_21;
+ __IO uint32_t P3_22;
+ __IO uint32_t P3_23;
+
+ __IO uint32_t P3_24; /* 0x1E0 */
+ __IO uint32_t P3_25;
+ __IO uint32_t P3_26;
+ __IO uint32_t P3_27;
+ __IO uint32_t P3_28;
+ __IO uint32_t P3_29;
+ __IO uint32_t P3_30;
+ __IO uint32_t P3_31;
+
+ __IO uint32_t P4_0; /* 0x200 */
+ __IO uint32_t P4_1;
+ __IO uint32_t P4_2;
+ __IO uint32_t P4_3;
+ __IO uint32_t P4_4;
+ __IO uint32_t P4_5;
+ __IO uint32_t P4_6;
+ __IO uint32_t P4_7;
+
+ __IO uint32_t P4_8; /* 0x220 */
+ __IO uint32_t P4_9;
+ __IO uint32_t P4_10;
+ __IO uint32_t P4_11;
+ __IO uint32_t P4_12;
+ __IO uint32_t P4_13;
+ __IO uint32_t P4_14;
+ __IO uint32_t P4_15;
+
+ __IO uint32_t P4_16; /* 0x240 */
+ __IO uint32_t P4_17;
+ __IO uint32_t P4_18;
+ __IO uint32_t P4_19;
+ __IO uint32_t P4_20;
+ __IO uint32_t P4_21;
+ __IO uint32_t P4_22;
+ __IO uint32_t P4_23;
+
+ __IO uint32_t P4_24; /* 0x260 */
+ __IO uint32_t P4_25;
+ __IO uint32_t P4_26;
+ __IO uint32_t P4_27;
+ __IO uint32_t P4_28;
+ __IO uint32_t P4_29;
+ __IO uint32_t P4_30;
+ __IO uint32_t P4_31;
+
+ __IO uint32_t P5_0; /* 0x280 */
+ __IO uint32_t P5_1;
+ __IO uint32_t P5_2;
+ __IO uint32_t P5_3;
+ __IO uint32_t P5_4; /* 0x290 */
+} LPC_IOCON_TypeDef;
+
+
+
+
+
+
+/*------------- Synchronous Serial Communication (SSP) -----------------------*/
+typedef struct
+{
+ __IO uint32_t CR0; /*!< Offset: 0x000 Control Register 0 (R/W) */
+ __IO uint32_t CR1; /*!< Offset: 0x004 Control Register 1 (R/W) */
+ __IO uint32_t DR; /*!< Offset: 0x008 Data Register (R/W) */
+ __I uint32_t SR; /*!< Offset: 0x00C Status Registe (R/ ) */
+ __IO uint32_t CPSR; /*!< Offset: 0x010 Clock Prescale Register (R/W) */
+ __IO uint32_t IMSC; /*!< Offset: 0x014 Interrupt Mask Set and Clear Register (R/W) */
+ __IO uint32_t RIS; /*!< Offset: 0x018 Raw Interrupt Status Register (R/W) */
+ __IO uint32_t MIS; /*!< Offset: 0x01C Masked Interrupt Status Register (R/W) */
+ __IO uint32_t ICR; /*!< Offset: 0x020 SSPICR Interrupt Clear Register (R/W) */
+ __IO uint32_t DMACR;
+} LPC_SSP_TypeDef;
+
+/*------------- Analog-to-Digital Converter (ADC) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t CR; /*!< Offset: 0x000 A/D Control Register (R/W) */
+ __IO uint32_t GDR; /*!< Offset: 0x004 A/D Global Data Register (R/W) */
+ uint32_t RESERVED0;
+ __IO uint32_t INTEN; /*!< Offset: 0x00C A/D Interrupt Enable Register (R/W) */
+ __IO uint32_t DR[8]; /*!< Offset: 0x010-0x02C A/D Channel 0..7 Data Register (R/W) */
+ __I uint32_t STAT; /*!< Offset: 0x030 A/D Status Register (R/ ) */
+ __IO uint32_t ADTRM;
+} LPC_ADC_TypeDef;
+
+/*------------- Controller Area Network (CAN) --------------------------------*/
+typedef struct
+{
+ __IO uint32_t mask[512]; /* ID Masks */
+} LPC_CANAF_RAM_TypeDef;
+
+typedef struct /* Acceptance Filter Registers */
+{
+ ///Offset: 0x00000000 - Acceptance Filter Register
+ __IO uint32_t AFMR;
+
+ ///Offset: 0x00000004 - Standard Frame Individual Start Address Register
+ __IO uint32_t SFF_sa;
+
+ ///Offset: 0x00000008 - Standard Frame Group Start Address Register
+ __IO uint32_t SFF_GRP_sa;
+
+ ///Offset: 0x0000000C - Extended Frame Start Address Register
+ __IO uint32_t EFF_sa;
+
+ ///Offset: 0x00000010 - Extended Frame Group Start Address Register
+ __IO uint32_t EFF_GRP_sa;
+
+ ///Offset: 0x00000014 - End of AF Tables register
+ __IO uint32_t ENDofTable;
+
+ ///Offset: 0x00000018 - LUT Error Address register
+ __I uint32_t LUTerrAd;
+
+ ///Offset: 0x0000001C - LUT Error Register
+ __I uint32_t LUTerr;
+
+ ///Offset: 0x00000020 - CAN Central Transmit Status Register
+ __IO uint32_t FCANIE;
+
+ ///Offset: 0x00000024 - FullCAN Interrupt and Capture registers 0
+ __IO uint32_t FCANIC0;
+
+ ///Offset: 0x00000028 - FullCAN Interrupt and Capture registers 1
+ __IO uint32_t FCANIC1;
+} LPC_CANAF_TypeDef;
+
+typedef struct /* Central Registers */
+{
+ __I uint32_t TxSR;
+ __I uint32_t RxSR;
+ __I uint32_t MSR;
+} LPC_CANCR_TypeDef;
+
+typedef struct /* Controller Registers */
+{
+ ///Offset: 0x00000000 - Controls the operating mode of the CAN Controller
+ __IO uint32_t MOD;
+
+ ///Offset: 0x00000004 - Command bits that affect the state
+ __O uint32_t CMR;
+
+ ///Offset: 0x00000008 - Global Controller Status and Error Counters
+ __IO uint32_t GSR;
+
+ ///Offset: 0x0000000C - Interrupt status, Arbitration Lost Capture, Error Code Capture
+ __I uint32_t ICR;
+
+ ///Offset: 0x00000010 - Interrupt Enable Register
+ __IO uint32_t IER;
+
+ ///Offset: 0x00000014 - Bus Timing Register
+ __IO uint32_t BTR;
+
+ ///Offset: 0x00000018 - Error Warning Limit
+ __IO uint32_t EWL;
+
+ ///Offset: 0x0000001C - Status Register
+ __I uint32_t SR;
+
+ ///Offset: 0x00000020 - Receive frame status
+ __IO uint32_t RFS;
+
+ ///Offset: 0x00000024 - Received Identifier
+ __IO uint32_t RID;
+
+ ///Offset: 0x00000028 - Received data bytes 1-4
+ __IO uint32_t RDA;
+
+ ///Offset: 0x0000002C - Received data bytes 5-8
+ __IO uint32_t RDB;
+
+ ///Offset: 0x00000030 - Transmit frame info (Tx Buffer 1)
+ __IO uint32_t TFI1;
+
+ ///Offset: 0x00000034 - Transmit Identifier (Tx Buffer 1)
+ __IO uint32_t TID1;
+
+ ///Offset: 0x00000038 - Transmit data bytes 1-4 (Tx Buffer 1)
+ __IO uint32_t TDA1;
+
+ ///Offset: 0x0000003C - Transmit data bytes 5-8 (Tx Buffer 1)
+ __IO uint32_t TDB1;
+
+ ///Offset: 0x00000040 - Transmit frame info (Tx Buffer 2)
+ __IO uint32_t TFI2;
+
+ ///Offset: 0x00000044 - Transmit Identifier (Tx Buffer 2)
+ __IO uint32_t TID2;
+
+ ///Offset: 0x00000048 - Transmit data bytes 1-4 (Tx Buffer 2)
+ __IO uint32_t TDA2;
+
+ ///Offset: 0x0000004C - Transmit data bytes 5-8 (Tx Buffer 2)
+ __IO uint32_t TDB2;
+
+ ///Offset: 0x00000050 - Transmit frame info (Tx Buffer 3)
+ __IO uint32_t TFI3;
+
+ ///Offset: 0x00000054 - Transmit Identifier (Tx Buffer 3)
+ __IO uint32_t TID3;
+
+ ///Offset: 0x00000058 - Transmit data bytes 1-4 (Tx Buffer 3)
+ __IO uint32_t TDA3;
+
+ ///Offset: 0x0000005C - Transmit data bytes 5-8 (Tx Buffer 3)
+ __IO uint32_t TDB3;
+} LPC_CAN_TypeDef;
+
+/*------------- Digital-to-Analog Converter (DAC) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t CR;
+ __IO uint32_t CTRL;
+ __IO uint32_t CNTVAL;
+} LPC_DAC_TypeDef;
+
+
+/*------------- Inter IC Sound (I2S) -----------------------------------------*/
+typedef struct
+{
+ __IO uint32_t DAO;
+ __IO uint32_t DAI;
+ __O uint32_t TXFIFO;
+ __I uint32_t RXFIFO;
+ __I uint32_t STATE;
+ __IO uint32_t DMA1;
+ __IO uint32_t DMA2;
+ __IO uint32_t IRQ;
+ __IO uint32_t TXRATE;
+ __IO uint32_t RXRATE;
+ __IO uint32_t TXBITRATE;
+ __IO uint32_t RXBITRATE;
+ __IO uint32_t TXMODE;
+ __IO uint32_t RXMODE;
+} LPC_I2S_TypeDef;
+
+
+
+
+
+
+/*------------- Motor Control Pulse-Width Modulation (MCPWM) -----------------*/
+typedef struct
+{
+ __I uint32_t CON;
+ __O uint32_t CON_SET;
+ __O uint32_t CON_CLR;
+ __I uint32_t CAPCON;
+ __O uint32_t CAPCON_SET;
+ __O uint32_t CAPCON_CLR;
+ __IO uint32_t TC0;
+ __IO uint32_t TC1;
+ __IO uint32_t TC2;
+ __IO uint32_t LIM0;
+ __IO uint32_t LIM1;
+ __IO uint32_t LIM2;
+ __IO uint32_t MAT0;
+ __IO uint32_t MAT1;
+ __IO uint32_t MAT2;
+ __IO uint32_t DT;
+ __IO uint32_t CP;
+ __IO uint32_t CAP0;
+ __IO uint32_t CAP1;
+ __IO uint32_t CAP2;
+ __I uint32_t INTEN;
+ __O uint32_t INTEN_SET;
+ __O uint32_t INTEN_CLR;
+ __I uint32_t CNTCON;
+ __O uint32_t CNTCON_SET;
+ __O uint32_t CNTCON_CLR;
+ __I uint32_t INTF;
+ __O uint32_t INTF_SET;
+ __O uint32_t INTF_CLR;
+ __O uint32_t CAP_CLR;
+} LPC_MCPWM_TypeDef;
+
+/*------------- Quadrature Encoder Interface (QEI) ---------------------------*/
+typedef struct
+{
+ __O uint32_t CON;
+ __I uint32_t STAT;
+ __IO uint32_t CONF;
+ __I uint32_t POS;
+ __IO uint32_t MAXPOS;
+ __IO uint32_t CMPOS0;
+ __IO uint32_t CMPOS1;
+ __IO uint32_t CMPOS2;
+ __I uint32_t INXCNT;
+ __IO uint32_t INXCMP0;
+ __IO uint32_t LOAD;
+ __I uint32_t TIME;
+ __I uint32_t VEL;
+ __I uint32_t CAP;
+ __IO uint32_t VELCOMP;
+ __IO uint32_t FILTERPHA;
+ __IO uint32_t FILTERPHB;
+ __IO uint32_t FILTERINX;
+ __IO uint32_t WINDOW;
+ __IO uint32_t INXCMP1;
+ __IO uint32_t INXCMP2;
+ uint32_t RESERVED0[993];
+ __O uint32_t IEC;
+ __O uint32_t IES;
+ __I uint32_t INTSTAT;
+ __I uint32_t IE;
+ __O uint32_t CLR;
+ __O uint32_t SET;
+} LPC_QEI_TypeDef;
+
+/*------------- SD/MMC card Interface (MCI)-----------------------------------*/
+typedef struct
+{
+ __IO uint32_t POWER;
+ __IO uint32_t CLOCK;
+ __IO uint32_t ARGUMENT;
+ __IO uint32_t COMMAND;
+ __I uint32_t RESP_CMD;
+ __I uint32_t RESP0;
+ __I uint32_t RESP1;
+ __I uint32_t RESP2;
+ __I uint32_t RESP3;
+ __IO uint32_t DATATMR;
+ __IO uint32_t DATALEN;
+ __IO uint32_t DATACTRL;
+ __I uint32_t DATACNT;
+ __I uint32_t STATUS;
+ __O uint32_t CLEAR;
+ __IO uint32_t MASK0;
+ uint32_t RESERVED0[2];
+ __I uint32_t FIFOCNT;
+ uint32_t RESERVED1[13];
+ __IO uint32_t FIFO[16];
+} LPC_MCI_TypeDef;
+
+
+
+
+
+
+
+
+
+
+/*------------- EEPROM Controller (EEPROM) -----------------------------------*/
+typedef struct
+{
+ __IO uint32_t CMD; /* 0x0080 */
+ __IO uint32_t ADDR;
+ __IO uint32_t WDATA;
+ __IO uint32_t RDATA;
+ __IO uint32_t WSTATE; /* 0x0090 */
+ __IO uint32_t CLKDIV;
+ __IO uint32_t PWRDWN; /* 0x0098 */
+ uint32_t RESERVED0[975];
+ __IO uint32_t INT_CLR_ENABLE; /* 0x0FD8 */
+ __IO uint32_t INT_SET_ENABLE;
+ __IO uint32_t INT_STATUS; /* 0x0FE0 */
+ __IO uint32_t INT_ENABLE;
+ __IO uint32_t INT_CLR_STATUS;
+ __IO uint32_t INT_SET_STATUS;
+} LPC_EEPROM_TypeDef;
+
+
+/*------------- COMPARATOR ----------------------------------------------------*/
+
+typedef struct { /*!< (@ 0x40020000) COMPARATOR Structure */
+ __IO uint32_t CTRL; /*!< (@ 0x40020000) Comparator block control register */
+ __IO uint32_t CTRL0; /*!< (@ 0x40020004) Comparator 0 control register */
+ __IO uint32_t CTRL1; /*!< (@ 0x40020008) Comparator 1 control register */
+} LPC_COMPARATOR_Type;
+
+
+#if defined ( __CC_ARM )
+#pragma no_anon_unions
+#endif
+
+/******************************************************************************/
+/* Peripheral memory map */
+/******************************************************************************/
+/* Base addresses */
+#define LPC_FLASH_BASE (0x00000000UL)
+#define LPC_RAM_BASE (0x10000000UL)
+#define LPC_PERI_RAM_BASE (0x20000000UL)
+#define LPC_APB0_BASE (0x40000000UL)
+#define LPC_APB1_BASE (0x40080000UL)
+#define LPC_AHBRAM1_BASE (0x20004000UL)
+#define LPC_AHB_BASE (0x20080000UL)
+#define LPC_CM3_BASE (0xE0000000UL)
+
+/* APB0 peripherals */
+#define LPC_WDT_BASE (LPC_APB0_BASE + 0x00000)
+#define LPC_TIM0_BASE (LPC_APB0_BASE + 0x04000)
+#define LPC_TIM1_BASE (LPC_APB0_BASE + 0x08000)
+#define LPC_UART0_BASE (LPC_APB0_BASE + 0x0C000)
+#define LPC_UART1_BASE (LPC_APB0_BASE + 0x10000)
+#define LPC_PWM0_BASE (LPC_APB0_BASE + 0x14000)
+#define LPC_PWM1_BASE (LPC_APB0_BASE + 0x18000)
+#define LPC_I2C0_BASE (LPC_APB0_BASE + 0x1C000)
+#define LPC_COMPARATOR_BASE (LPC_APB0_BASE + 0x20000)
+#define LPC_RTC_BASE (LPC_APB0_BASE + 0x24000)
+#define LPC_GPIOINT_BASE (LPC_APB0_BASE + 0x28080)
+#define LPC_IOCON_BASE (LPC_APB0_BASE + 0x2C000)
+#define LPC_SSP1_BASE (LPC_APB0_BASE + 0x30000)
+#define LPC_ADC_BASE (LPC_APB0_BASE + 0x34000)
+#define LPC_CANAF_RAM_BASE (LPC_APB0_BASE + 0x38000)
+#define LPC_CANAF_BASE (LPC_APB0_BASE + 0x3C000)
+#define LPC_CANCR_BASE (LPC_APB0_BASE + 0x40000)
+#define LPC_CAN1_BASE (LPC_APB0_BASE + 0x44000)
+#define LPC_CAN2_BASE (LPC_APB0_BASE + 0x48000)
+#define LPC_I2C1_BASE (LPC_APB0_BASE + 0x5C000)
+
+/* APB1 peripherals */
+#define LPC_SSP0_BASE (LPC_APB1_BASE + 0x08000)
+#define LPC_DAC_BASE (LPC_APB1_BASE + 0x0C000)
+#define LPC_TIM2_BASE (LPC_APB1_BASE + 0x10000)
+#define LPC_TIM3_BASE (LPC_APB1_BASE + 0x14000)
+#define LPC_UART2_BASE (LPC_APB1_BASE + 0x18000)
+#define LPC_UART3_BASE (LPC_APB1_BASE + 0x1C000)
+#define LPC_I2C2_BASE (LPC_APB1_BASE + 0x20000)
+#define LPC_UART4_BASE (LPC_APB1_BASE + 0x24000)
+#define LPC_I2S_BASE (LPC_APB1_BASE + 0x28000)
+#define LPC_SSP2_BASE (LPC_APB1_BASE + 0x2C000)
+#define LPC_MCPWM_BASE (LPC_APB1_BASE + 0x38000)
+#define LPC_QEI_BASE (LPC_APB1_BASE + 0x3C000)
+#define LPC_MCI_BASE (LPC_APB1_BASE + 0x40000)
+#define LPC_SC_BASE (LPC_APB1_BASE + 0x7C000)
+
+/* AHB peripherals */
+#define LPC_GPDMA_BASE (LPC_AHB_BASE + 0x00000)
+#define LPC_GPDMACH0_BASE (LPC_AHB_BASE + 0x00100)
+#define LPC_GPDMACH1_BASE (LPC_AHB_BASE + 0x00120)
+#define LPC_GPDMACH2_BASE (LPC_AHB_BASE + 0x00140)
+#define LPC_GPDMACH3_BASE (LPC_AHB_BASE + 0x00160)
+#define LPC_GPDMACH4_BASE (LPC_AHB_BASE + 0x00180)
+#define LPC_GPDMACH5_BASE (LPC_AHB_BASE + 0x001A0)
+#define LPC_GPDMACH6_BASE (LPC_AHB_BASE + 0x001C0)
+#define LPC_GPDMACH7_BASE (LPC_AHB_BASE + 0x001E0)
+#define LPC_EMAC_BASE (LPC_AHB_BASE + 0x04000)
+#define LPC_LCD_BASE (LPC_AHB_BASE + 0x08000)
+#define LPC_USB_BASE (LPC_AHB_BASE + 0x0C000)
+#define LPC_CRC_BASE (LPC_AHB_BASE + 0x10000)
+#define LPC_GPIO0_BASE (LPC_AHB_BASE + 0x18000)
+#define LPC_GPIO1_BASE (LPC_AHB_BASE + 0x18020)
+#define LPC_GPIO2_BASE (LPC_AHB_BASE + 0x18040)
+#define LPC_GPIO3_BASE (LPC_AHB_BASE + 0x18060)
+#define LPC_GPIO4_BASE (LPC_AHB_BASE + 0x18080)
+#define LPC_GPIO5_BASE (LPC_AHB_BASE + 0x180A0)
+#define LPC_EMC_BASE (LPC_AHB_BASE + 0x1C000)
+
+#define LPC_EEPROM_BASE (LPC_FLASH_BASE+ 0x200080)
+
+
+/******************************************************************************/
+/* Peripheral declaration */
+/******************************************************************************/
+#define LPC_SC ((LPC_SC_TypeDef *) LPC_SC_BASE )
+#define LPC_WDT ((LPC_WDT_TypeDef *) LPC_WDT_BASE )
+#define LPC_TIM0 ((LPC_TIM_TypeDef *) LPC_TIM0_BASE )
+#define LPC_TIM1 ((LPC_TIM_TypeDef *) LPC_TIM1_BASE )
+#define LPC_TIM2 ((LPC_TIM_TypeDef *) LPC_TIM2_BASE )
+#define LPC_TIM3 ((LPC_TIM_TypeDef *) LPC_TIM3_BASE )
+#define LPC_UART0 ((LPC_UART_TypeDef *) LPC_UART0_BASE )
+#define LPC_UART1 ((LPC_UART1_TypeDef *) LPC_UART1_BASE )
+#define LPC_UART2 ((LPC_UART_TypeDef *) LPC_UART2_BASE )
+#define LPC_UART3 ((LPC_UART_TypeDef *) LPC_UART3_BASE )
+#define LPC_UART4 ((LPC_UART4_TypeDef *) LPC_UART4_BASE )
+#define LPC_PWM0 ((LPC_PWM_TypeDef *) LPC_PWM0_BASE )
+#define LPC_PWM1 ((LPC_PWM_TypeDef *) LPC_PWM1_BASE )
+#define LPC_I2C0 ((LPC_I2C_TypeDef *) LPC_I2C0_BASE )
+#define LPC_I2C1 ((LPC_I2C_TypeDef *) LPC_I2C1_BASE )
+#define LPC_I2C2 ((LPC_I2C_TypeDef *) LPC_I2C2_BASE )
+#define LPC_I2S ((LPC_I2S_TypeDef *) LPC_I2S_BASE )
+#define LPC_COMPARATOR ((LPC_COMPARATOR_Type *) LPC_COMPARATOR_BASE)
+#define LPC_RTC ((LPC_RTC_TypeDef *) LPC_RTC_BASE )
+#define LPC_GPIOINT ((LPC_GPIOINT_TypeDef *) LPC_GPIOINT_BASE )
+#define LPC_IOCON ((LPC_IOCON_TypeDef *) LPC_IOCON_BASE )
+#define LPC_SSP0 ((LPC_SSP_TypeDef *) LPC_SSP0_BASE )
+#define LPC_SSP1 ((LPC_SSP_TypeDef *) LPC_SSP1_BASE )
+#define LPC_SSP2 ((LPC_SSP_TypeDef *) LPC_SSP2_BASE )
+#define LPC_ADC ((LPC_ADC_TypeDef *) LPC_ADC_BASE )
+#define LPC_DAC ((LPC_DAC_TypeDef *) LPC_DAC_BASE )
+#define LPC_CANAF_RAM ((LPC_CANAF_RAM_TypeDef *) LPC_CANAF_RAM_BASE)
+#define LPC_CANAF ((LPC_CANAF_TypeDef *) LPC_CANAF_BASE )
+#define LPC_CANCR ((LPC_CANCR_TypeDef *) LPC_CANCR_BASE )
+#define LPC_CAN1 ((LPC_CAN_TypeDef *) LPC_CAN1_BASE )
+#define LPC_CAN2 ((LPC_CAN_TypeDef *) LPC_CAN2_BASE )
+#define LPC_MCPWM ((LPC_MCPWM_TypeDef *) LPC_MCPWM_BASE )
+#define LPC_QEI ((LPC_QEI_TypeDef *) LPC_QEI_BASE )
+#define LPC_MCI ((LPC_MCI_TypeDef *) LPC_MCI_BASE )
+#define LPC_GPDMA ((LPC_GPDMA_TypeDef *) LPC_GPDMA_BASE )
+#define LPC_GPDMACH0 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH0_BASE )
+#define LPC_GPDMACH1 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH1_BASE )
+#define LPC_GPDMACH2 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH2_BASE )
+#define LPC_GPDMACH3 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH3_BASE )
+#define LPC_GPDMACH4 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH4_BASE )
+#define LPC_GPDMACH5 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH5_BASE )
+#define LPC_GPDMACH6 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH6_BASE )
+#define LPC_GPDMACH7 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH7_BASE )
+#define LPC_EMAC ((LPC_EMAC_TypeDef *) LPC_EMAC_BASE )
+#define LPC_LCD ((LPC_LCD_TypeDef *) LPC_LCD_BASE )
+#define LPC_USB ((LPC_USB_TypeDef *) LPC_USB_BASE )
+#define LPC_GPIO0 ((LPC_GPIO_TypeDef *) LPC_GPIO0_BASE )
+#define LPC_GPIO1 ((LPC_GPIO_TypeDef *) LPC_GPIO1_BASE )
+#define LPC_GPIO2 ((LPC_GPIO_TypeDef *) LPC_GPIO2_BASE )
+#define LPC_GPIO3 ((LPC_GPIO_TypeDef *) LPC_GPIO3_BASE )
+#define LPC_GPIO4 ((LPC_GPIO_TypeDef *) LPC_GPIO4_BASE )
+#define LPC_GPIO5 ((LPC_GPIO_TypeDef *) LPC_GPIO5_BASE )
+#define LPC_EMC ((LPC_EMC_TypeDef *) LPC_EMC_BASE )
+#define LPC_CRC ((LPC_CRC_TypeDef *) LPC_CRC_BASE )
+#define LPC_EEPROM ((LPC_EEPROM_TypeDef *) LPC_EEPROM_BASE )
+
+
+
+#endif // __LPC407x_8x_177x_8x_H__