The official mbed C/C SDK provides the software platform and libraries to build your applications.

Fork of mbed by mbed official

Revision:
90:cb3d968589d8
diff -r 552587b429a1 -r cb3d968589d8 TARGET_NUCLEO_L152RE/stm32l1xx_hal_cryp.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L152RE/stm32l1xx_hal_cryp.h	Tue Oct 28 16:40:41 2014 +0000
@@ -0,0 +1,411 @@
+/**
+  ******************************************************************************
+  * @file    stm32l1xx_hal_cryp.h
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    5-September-2014
+  * @brief   Header file of CRYP HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L1xx_HAL_CRYP_H
+#define __STM32L1xx_HAL_CRYP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+   
+#if defined(STM32L162xC) || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L162xE)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l1xx_hal_def.h"
+
+/** @addtogroup STM32L1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CRYP
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+
+/** @defgroup CRYP_Exported_Types CRYP Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  CRYP Configuration Structure definition  
+  */
+typedef struct
+{  
+  uint32_t DataType;    /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+                             This parameter can be a value of @ref CRYP_Data_Type */
+  
+  uint8_t* pKey;        /*!< The key used for encryption/decryption */
+  
+  uint8_t* pInitVect;   /*!< The initialization vector used also as initialization
+                             counter in CTR mode */
+  
+}CRYP_InitTypeDef;
+
+/** 
+  * @brief HAL CRYP State structures definition  
+  */ 
+typedef enum
+{
+  HAL_CRYP_STATE_RESET             = 0x00,  /*!< CRYP not yet initialized or disabled  */
+  HAL_CRYP_STATE_READY             = 0x01,  /*!< CRYP initialized and ready for use    */
+  HAL_CRYP_STATE_BUSY              = 0x02,  /*!< CRYP internal processing is ongoing   */
+  HAL_CRYP_STATE_TIMEOUT           = 0x03,  /*!< CRYP timeout state                    */
+  HAL_CRYP_STATE_ERROR             = 0x04   /*!< CRYP error state                      */ 
+    
+}HAL_CRYP_STATETypeDef;
+
+/** 
+  * @brief HAL CRYP phase structures definition  
+  */ 
+typedef enum
+{
+  HAL_CRYP_PHASE_READY             = 0x01,    /*!< CRYP peripheral is ready for initialization. */
+  HAL_CRYP_PHASE_PROCESS           = 0x02,    /*!< CRYP peripheral is in processing phase */
+}HAL_PhaseTypeDef;
+
+/** 
+  * @brief  CRYP handle Structure definition  
+  */ 
+typedef struct
+{
+  CRYP_InitTypeDef            Init;             /*!< CRYP required parameters */
+
+  uint8_t                     *pCrypInBuffPtr;  /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+  uint8_t                     *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+  __IO uint16_t               CrypInCount;      /*!< Counter of inputed data */
+
+  __IO uint16_t               CrypOutCount;     /*!< Counter of outputed data */
+
+  HAL_StatusTypeDef           Status;           /*!< CRYP peripheral status */
+
+  HAL_PhaseTypeDef            Phase;            /*!< CRYP peripheral phase */
+
+  DMA_HandleTypeDef           *hdmain;          /*!< CRYP In DMA handle parameters */
+
+  DMA_HandleTypeDef           *hdmaout;         /*!< CRYP Out DMA handle parameters */
+
+  HAL_LockTypeDef             Lock;             /*!< CRYP locking object */
+
+  __IO  HAL_CRYP_STATETypeDef State;            /*!< CRYP peripheral state */
+
+}CRYP_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CRYP_Exported_Constants CRYP Exported Constants
+  * @{
+  */
+
+/** @defgroup CRYP_Data_Type CRYP Data Type
+  * @{
+  */
+#define CRYP_DATATYPE_32B         ((uint32_t)0x00000000)
+#define CRYP_DATATYPE_16B         AES_CR_DATATYPE_0
+#define CRYP_DATATYPE_8B          AES_CR_DATATYPE_1
+#define CRYP_DATATYPE_1B          AES_CR_DATATYPE
+
+#define IS_CRYP_DATATYPE(DATATYPE) (((DATATYPE) == CRYP_DATATYPE_32B) || \
+                                    ((DATATYPE) == CRYP_DATATYPE_16B) || \
+                                    ((DATATYPE) == CRYP_DATATYPE_8B)  || \
+                                    ((DATATYPE) == CRYP_DATATYPE_1B))  
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_AlgoModeDirection CRYP Algo Mode Direction
+  * @{
+  */ 
+#define CRYP_CR_ALGOMODE_DIRECTION              (uint32_t)(AES_CR_MODE|AES_CR_CHMOD)
+
+#define CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT        ((uint32_t)0x00000000)
+#define CRYP_CR_ALGOMODE_AES_ECB_KEYDERDECRYPT  (AES_CR_MODE)
+#define CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT        (AES_CR_CHMOD_0)
+#define CRYP_CR_ALGOMODE_AES_CBC_KEYDERDECRYPT  ((uint32_t)(AES_CR_CHMOD_0|AES_CR_MODE))
+#define CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT        (AES_CR_CHMOD_1)
+#define CRYP_CR_ALGOMODE_AES_CTR_DECRYPT        ((uint32_t)(AES_CR_CHMOD_1 | AES_CR_MODE_1))
+/**
+  * @}
+  */
+  
+/** @defgroup CRYP_AES_Interrupts AES Interrupts
+  * @{
+  */ 
+#define AES_IT_CC                          AES_CR_CCIE  /*!< Computation Complete interrupt */
+#define AES_IT_ERR                         AES_CR_ERRIE /*!< Error interrupt                */
+
+/**
+  * @}
+  */
+
+
+/** @defgroup CRYP_AES_Flags AES Flags
+  * @{
+  */ 
+#define AES_FLAG_CCF                       AES_SR_CCF    /*!< Computation Complete Flag */
+#define AES_FLAG_RDERR                     AES_SR_RDERR  /*!< Read Error Flag           */
+#define AES_FLAG_WRERR                     AES_SR_WRERR  /*!< Write Error Flag          */
+
+/**
+  * @}
+  */ 
+
+/** @defgroup CRYP_AES_Clear_Flags AES Clear Flags
+  * @{
+  */ 
+#define AES_CLEARFLAG_CCF                       AES_CR_CCFC   /*!< Computation Complete Flag Clear */
+#define AES_CLEARFLAG_RDERR                     AES_CR_ERRC   /*!< Read Error Clear           */
+#define AES_CLEARFLAG_WRERR                     AES_CR_ERRC   /*!< Write Error Clear          */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup CRYP_Exported_Macros CRYP Exported Macros
+  * @{
+  */
+
+/** @brief Reset CRYP handle state
+  * @param  __HANDLE__: specifies the CRYP Handle.
+  * @retval None
+  */
+#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)
+
+/**
+  * @brief  Enable/Disable the CRYP peripheral.
+  * @retval None
+  */
+#define __HAL_CRYP_ENABLE()                   SET_BIT(AES->CR, AES_CR_EN)
+#define __HAL_CRYP_DISABLE()                  CLEAR_BIT(AES->CR, AES_CR_EN)
+
+/**
+  * @brief  Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC,...
+  * @param  __MODE__: The algorithm mode.
+  * @retval None
+  */
+#define __HAL_CRYP_SET_MODE(__MODE__)             SET_BIT(AES->CR, (__MODE__))
+
+
+/** @brief  Check whether the specified CRYP flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg AES_FLAG_CCF   : Computation Complete Flag
+  *            @arg AES_FLAG_RDERR : Read Error Flag
+  *            @arg AES_FLAG_WRERR : Write Error Flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_CRYP_GET_FLAG(__FLAG__)         ((AES->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the CRYP pending flag.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __FLAG__: specifies the flag to clear.
+  *         This parameter can be one of the following values:
+  *            @arg AES_CLEARFLAG_CCF   : Computation Complete Clear Flag
+  *            @arg AES_CLEARFLAG_RDERR : Read Error Clear
+  *            @arg AES_CLEARFLAG_WRERR : Write Error Clear
+  * @retval None
+  */
+#define __HAL_CRYP_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT(AES->CR, (__FLAG__))
+
+/**
+  * @brief  Enable the CRYP interrupt.
+  * @param  __INTERRUPT__: CRYP Interrupt.
+  * @retval None
+  */
+#define __HAL_CRYP_ENABLE_IT(__INTERRUPT__)   SET_BIT(AES->CR, (__INTERRUPT__))
+
+/**
+  * @brief  Disable the CRYP interrupt.
+  * @param  __INTERRUPT__: CRYP interrupt.
+  * @retval None
+  */
+#define __HAL_CRYP_DISABLE_IT(__INTERRUPT__)  CLEAR_BIT(AES->CR, (__INTERRUPT__))
+
+/** @brief  Checks if the specified CRYP interrupt source is enabled or disabled.
+  * @param __HANDLE__: CRYP handle
+  * @param __INTERRUPT__: CRYP interrupt source to check
+  *         This parameter can be one of the following values:
+  *            @arg AES_IT_CC   : Computation Complete interrupt
+  *            @arg AES_IT_ERR : Error interrupt (used for RDERR and WRERR)
+  * @retval State of interruption (SET or RESET)
+  */
+#define __HAL_CRYP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
+    (( (AES->CR & (__INTERRUPT__)) == (__INTERRUPT__)       \
+     )? SET : RESET                                         \
+    )
+         
+/** @brief  Clear the CRYP pending IT.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __IT__: specifies the IT to clear.
+  *         This parameter can be one of the following values:
+  *            @arg AES_CLEARFLAG_CCF   : Computation Complete Clear Flag
+  *            @arg AES_CLEARFLAG_RDERR : Read Error Clear
+  *            @arg AES_CLEARFLAG_WRERR : Write Error Clear
+  * @retval None
+  */
+#define __HAL_CRYP_CLEAR_IT(__HANDLE__, __IT__) SET_BIT(AES->CR, (__IT__))
+
+/**
+  * @}
+  */
+
+/* Include CRYP HAL Extension module */
+#include "stm32l1xx_hal_cryp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup CRYP_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup CRYP_Exported_Functions_Group1
+  * @{
+  */
+
+/* Initialization/de-initialization functions *********************************/
+HAL_StatusTypeDef     HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
+HAL_StatusTypeDef     HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
+
+/* MSP functions  *************************************************************/
+void                  HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
+void                  HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
+
+/**
+  * @}
+  */ 
+
+/** @addtogroup CRYP_Exported_Functions_Group2
+  * @{
+  */
+
+/* AES encryption/decryption using polling  ***********************************/
+HAL_StatusTypeDef     HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt  *********************************/
+HAL_StatusTypeDef     HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef     HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef     HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef     HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef     HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef     HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA  ***************************************/
+HAL_StatusTypeDef     HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef     HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef     HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef     HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef     HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef     HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/**
+  * @}
+  */ 
+
+/** @addtogroup CRYP_Exported_Functions_Group3
+  * @{
+  */
+
+/* CallBack functions  ********************************************************/
+void                  HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
+void                  HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
+void                  HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
+
+/**
+  * @}
+  */ 
+
+/** @addtogroup CRYP_Exported_Functions_Group4
+  * @{
+  */
+
+/* Processing functions  ********************************************************/
+void                  HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
+
+/**
+  * @}
+  */ 
+
+/** @addtogroup CRYP_Exported_Functions_Group5
+  * @{
+  */
+
+/* Peripheral State functions  **************************************************/
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+#endif /* STM32L162xC || STM32L162xCA || STM32L162xD || STM32L162xE*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L1xx_HAL_CRYP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/