The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of mbed by
Diff: TARGET_GHI_MBUINO/TOOLCHAIN_GCC_ARM/LPC11U24.ld
- Revision:
- 88:9327015d4013
diff -r 6213f644d804 -r 9327015d4013 TARGET_GHI_MBUINO/TOOLCHAIN_GCC_ARM/LPC11U24.ld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_GHI_MBUINO/TOOLCHAIN_GCC_ARM/LPC11U24.ld Fri Aug 15 15:28:31 2014 +0100 @@ -0,0 +1,154 @@ +/* Linker script for mbed LPC1768 */ + +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 32K + RAM (rwx) : ORIGIN = 0x100000C0, LENGTH = 0x1740 + USB_RAM (rwx): ORIGIN = 0x20004000, LENGTH = 0x800 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text.Reset_Handler) + *(.text.SystemInit) + + /* Only vectors and code running at reset are safe to be in first 512 + bytes since RAM can be mapped into this area for RAM based interrupt + vectors. */ + . = 0x00000200; + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE (__fini_array_end = .); + + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + __bss_start__ = .; + *(.bss*) + *(COMMON) + __bss_end__ = .; + } > RAM + + .heap : + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy : + { + *(.stack) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +}