Egor Rumjantsev
The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F411RE/stm32f4xx_hal_pcd.h
- Revision:
- 86:04dd9b1680ae
diff -r 024bf7f99721 -r 04dd9b1680ae TARGET_NUCLEO_F411RE/stm32f4xx_hal_pcd.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_pcd.h Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,281 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_H
+#define __STM32F4xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+ /**
+ * @brief PCD State structures definition
+ */
+typedef enum
+{
+ HAL_PCD_STATE_RESET = 0x00,
+ HAL_PCD_STATE_READY = 0x01,
+ HAL_PCD_STATE_ERROR = 0x02,
+ HAL_PCD_STATE_BUSY = 0x03,
+ HAL_PCD_STATE_TIMEOUT = 0x04
+} PCD_StateTypeDef;
+
+
+typedef USB_OTG_GlobalTypeDef PCD_TypeDef;
+typedef USB_OTG_CfgTypeDef PCD_InitTypeDef;
+typedef USB_OTG_EPTypeDef PCD_EPTypeDef ;
+
+/**
+ * @brief PCD Handle Structure definition
+ */
+typedef struct
+{
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ PCD_EPTypeDef IN_ep[15]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[15]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+ void *pData; /*!< Pointer to upper stack Handler */
+
+} PCD_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants
+ * @{
+ */
+
+/** @defgroup PCD_Speed
+ * @{
+ */
+#define PCD_SPEED_HIGH 0
+#define PCD_SPEED_HIGH_IN_FULL 1
+#define PCD_SPEED_FULL 2
+/**
+ * @}
+ */
+
+ /** @defgroup PCD_PHY_Module
+ * @{
+ */
+#define PCD_PHY_ULPI 1
+#define PCD_PHY_EMBEDDED 2
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Instance_definition
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ #define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \
+ ((INSTANCE) == USB_OTG_HS))
+#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ #define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup PCD_Interrupt_Clock
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
+
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
+ ~(USB_OTG_PCGCCTL_STOPCLK)
+
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10)
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE ((uint32_t)0x08)
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE ((uint32_t)0x0C)
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE ((uint32_t)0x10)
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE ((uint32_t)0x08)
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE ((uint32_t)0x0C)
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE ((uint32_t)0x10)
+
+
+#define USB_HS_EXTI_LINE_WAKEUP ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the USB HS EXTI Line */
+#define USB_FS_EXTI_LINE_WAKEUP ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT() EXTI->IMR |= (USB_HS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_HS_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_HS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_HS_EXTI_GET_FLAG() EXTI->PR & (USB_HS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG() EXTI->PR = (USB_HS_EXTI_LINE_WAKEUP)
+
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER() EXTI->FTSR &= ~(USB_HS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= USB_HS_EXTI_LINE_WAKEUP
+
+
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (USB_HS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR &= ~(USB_HS_EXTI_LINE_WAKEUP)
+
+
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER() EXTI->RTSR &= ~(USB_HS_EXTI_LINE_WAKEUP);\
+ EXTI->FTSR &= ~(USB_HS_EXTI_LINE_WAKEUP;)\
+ EXTI->RTSR |= USB_HS_EXTI_LINE_WAKEUP;\
+ EXTI->FTSR |= USB_HS_EXTI_LINE_WAKEUP
+
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_FS_EXTI_LINE_WAKEUP)
+
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT() EXTI->IMR |= USB_FS_EXTI_LINE_WAKEUP
+#define __HAL_USB_FS_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_FS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_FS_EXTI_GET_FLAG() EXTI->PR & (USB_FS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG() EXTI->PR = USB_FS_EXTI_LINE_WAKEUP
+
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER() EXTI->FTSR &= ~(USB_FS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= USB_FS_EXTI_LINE_WAKEUP
+
+
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (USB_FS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR &= ~(USB_FS_EXTI_LINE_WAKEUP)
+
+
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER() EXTI->RTSR &= ~(USB_FS_EXTI_LINE_WAKEUP);\
+ EXTI->FTSR &= ~(USB_FS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= USB_FS_EXTI_LINE_WAKEUP;\
+ EXTI->FTSR |= USB_FS_EXTI_LINE_WAKEUP
+
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_FS_EXTI_LINE_WAKEUP)
+
+/**
+ * @}
+ */
+
+/* Include PCD HAL Extension module */
+#include "stm32f4xx_hal_pcd_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+
+/* I/O operation functions *****************************************************/
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+
+/* Create an alias to keep compatibility with the old name */
+#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo
+
+/* Peripheral State functions **************************************************/
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/