The official mbed C/C SDK provides the software platform and libraries to build your applications.

Fork of mbed by mbed official

Revision:
86:04dd9b1680ae
diff -r 024bf7f99721 -r 04dd9b1680ae TARGET_NUCLEO_F411RE/stm32f4xx_hal_cryp.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_cryp.h	Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,403 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_cryp.h
+  * @author  MCD Application Team
+  * @version V1.1.0
+  * @date    19-June-2014
+  * @brief   Header file of CRYP HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRYP_H
+#define __STM32F4xx_HAL_CRYP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CRYP
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** 
+  * @brief  CRYP Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t DataType;    /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+                             This parameter can be a value of @ref CRYP_Data_Type */
+
+  uint32_t KeySize;     /*!< Used only in AES mode only : 128, 192 or 256 bit key length. 
+                             This parameter can be a value of @ref CRYP_Key_Size */
+
+  uint8_t* pKey;        /*!< The key used for encryption/decryption */
+
+  uint8_t* pInitVect;   /*!< The initialization vector used also as initialization
+                             counter in CTR mode */
+
+  uint8_t IVSize;       /*!< The size of initialization vector. 
+                             This parameter (called nonce size in CCM) is used only 
+                             in AES-128/192/256 encryption/decryption CCM mode */
+
+  uint8_t TagSize;      /*!< The size of returned authentication TAG. 
+                             This parameter is used only in AES-128/192/256 
+                             encryption/decryption CCM mode */
+
+  uint8_t* Header;      /*!< The header used in GCM and CCM modes */
+
+  uint16_t HeaderSize;  /*!< The size of header buffer in bytes */
+
+  uint8_t* pScratch;    /*!< Scratch buffer used to append the header. It's size must be equal to header size + 21 bytes.
+                             This parameter is used only in AES-128/192/256 encryption/decryption CCM mode */
+}CRYP_InitTypeDef;
+
+/** 
+  * @brief HAL CRYP State structures definition
+  */
+typedef enum
+{
+  HAL_CRYP_STATE_RESET             = 0x00,  /*!< CRYP not yet initialized or disabled  */
+  HAL_CRYP_STATE_READY             = 0x01,  /*!< CRYP initialized and ready for use    */
+  HAL_CRYP_STATE_BUSY              = 0x02,  /*!< CRYP internal processing is ongoing   */
+  HAL_CRYP_STATE_TIMEOUT           = 0x03,  /*!< CRYP timeout state                    */
+  HAL_CRYP_STATE_ERROR             = 0x04   /*!< CRYP error state                      */
+}HAL_CRYP_STATETypeDef;
+
+/** 
+  * @brief HAL CRYP phase structures definition
+  */
+typedef enum
+{
+  HAL_CRYP_PHASE_READY             = 0x01,    /*!< CRYP peripheral is ready for initialization. */
+  HAL_CRYP_PHASE_PROCESS           = 0x02,    /*!< CRYP peripheral is in processing phase */
+  HAL_CRYP_PHASE_FINAL             = 0x03     /*!< CRYP peripheral is in final phase
+                                                   This is relevant only with CCM and GCM modes */
+}HAL_PhaseTypeDef;
+
+/** 
+  * @brief  CRYP handle Structure definition
+  */ 
+typedef struct
+{
+      CRYP_InitTypeDef         Init;             /*!< CRYP required parameters */
+
+      uint8_t                  *pCrypInBuffPtr;  /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+      uint8_t                  *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+      __IO uint16_t            CrypInCount;      /*!< Counter of inputed data */
+
+      __IO uint16_t            CrypOutCount;     /*!< Counter of outputed data */
+
+      HAL_StatusTypeDef        Status;           /*!< CRYP peripheral status */
+
+      HAL_PhaseTypeDef         Phase;            /*!< CRYP peripheral phase */
+
+      DMA_HandleTypeDef        *hdmain;          /*!< CRYP In DMA handle parameters */
+
+      DMA_HandleTypeDef        *hdmaout;         /*!< CRYP Out DMA handle parameters */
+
+      HAL_LockTypeDef          Lock;             /*!< CRYP locking object */
+
+   __IO  HAL_CRYP_STATETypeDef State;            /*!< CRYP peripheral state */
+}CRYP_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CRYP_Exported_Constants
+  * @{
+  */
+
+/** @defgroup CRYP_Key_Size 
+  * @{
+  */
+#define CRYP_KEYSIZE_128B         ((uint32_t)0x00000000)
+#define CRYP_KEYSIZE_192B         CRYP_CR_KEYSIZE_0
+#define CRYP_KEYSIZE_256B         CRYP_CR_KEYSIZE_1
+
+#define IS_CRYP_KEYSIZE(KEYSIZE)  (((KEYSIZE) == CRYP_KEYSIZE_128B)  || \
+                                   ((KEYSIZE) == CRYP_KEYSIZE_192B)  || \
+                                   ((KEYSIZE) == CRYP_KEYSIZE_256B))
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Data_Type 
+  * @{
+  */
+#define CRYP_DATATYPE_32B         ((uint32_t)0x00000000)
+#define CRYP_DATATYPE_16B         CRYP_CR_DATATYPE_0
+#define CRYP_DATATYPE_8B          CRYP_CR_DATATYPE_1
+#define CRYP_DATATYPE_1B          CRYP_CR_DATATYPE
+
+#define IS_CRYP_DATATYPE(DATATYPE) (((DATATYPE) == CRYP_DATATYPE_32B) || \
+                                    ((DATATYPE) == CRYP_DATATYPE_16B) || \
+                                    ((DATATYPE) == CRYP_DATATYPE_8B)  || \
+                                    ((DATATYPE) == CRYP_DATATYPE_1B))  
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_AlgoModeDirection
+  * @{
+  */ 
+#define CRYP_CR_ALGOMODE_DIRECTION         ((uint32_t)0x0008003C)
+#define CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT  ((uint32_t)0x00000000)
+#define CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT  ((uint32_t)0x00000004)
+#define CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT  ((uint32_t)0x00000008)
+#define CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT  ((uint32_t)0x0000000C)
+#define CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT   ((uint32_t)0x00000010)
+#define CRYP_CR_ALGOMODE_DES_ECB_DECRYPT   ((uint32_t)0x00000014)
+#define CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT   ((uint32_t)0x00000018)
+#define CRYP_CR_ALGOMODE_DES_CBC_DECRYPT   ((uint32_t)0x0000001C)
+#define CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT   ((uint32_t)0x00000020)
+#define CRYP_CR_ALGOMODE_AES_ECB_DECRYPT   ((uint32_t)0x00000024)
+#define CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT   ((uint32_t)0x00000028)
+#define CRYP_CR_ALGOMODE_AES_CBC_DECRYPT   ((uint32_t)0x0000002C)
+#define CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT   ((uint32_t)0x00000030)
+#define CRYP_CR_ALGOMODE_AES_CTR_DECRYPT   ((uint32_t)0x00000034)
+/**
+  * @}
+  */
+  
+/** @defgroup CRYP_Interrupt
+  * @{
+  */
+#define CRYP_IT_INI               ((uint32_t)CRYP_IMSCR_INIM)   /*!< Input FIFO Interrupt */
+#define CRYP_IT_OUTI              ((uint32_t)CRYP_IMSCR_OUTIM)  /*!< Output FIFO Interrupt */
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Flags 
+  * @{
+  */
+
+#define CRYP_FLAG_BUSY   ((uint32_t)0x00000010)  /*!< The CRYP core is currently 
+                                                     processing a block of data 
+                                                     or a key preparation (for 
+                                                     AES decryption). */
+#define CRYP_FLAG_IFEM   ((uint32_t)0x00000001)  /*!< Input FIFO is empty */
+#define CRYP_FLAG_IFNF   ((uint32_t)0x00000002)  /*!< Input FIFO is not Full */
+#define CRYP_FLAG_OFNE   ((uint32_t)0x00000004)  /*!< Output FIFO is not empty */
+#define CRYP_FLAG_OFFU   ((uint32_t)0x00000008)  /*!< Output FIFO is Full */
+#define CRYP_FLAG_OUTRIS ((uint32_t)0x01000002)  /*!< Output FIFO service raw 
+                                                      interrupt status */
+#define CRYP_FLAG_INRIS  ((uint32_t)0x01000001)  /*!< Input FIFO service raw 
+                                                      interrupt status */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset CRYP handle state
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @retval None
+  */
+#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)
+
+/**
+  * @brief  Enable/Disable the CRYP peripheral.
+  * @param  None
+  * @retval None
+  */
+#define __HAL_CRYP_ENABLE()  (CRYP->CR |=  CRYP_CR_CRYPEN)
+#define __HAL_CRYP_DISABLE() (CRYP->CR &=  ~CRYP_CR_CRYPEN)
+
+/**
+  * @brief  Flush the data FIFO.
+  * @param  None
+  * @retval None
+  */
+#define __HAL_CRYP_FIFO_FLUSH() (CRYP->CR |=  CRYP_CR_FFLUSH)
+
+/**
+  * @brief  Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC.
+  * @param  MODE: The algorithm mode.
+  * @retval None
+  */
+#define __HAL_CRYP_SET_MODE(MODE)  CRYP->CR |= (uint32_t)(MODE)
+
+/** @brief  Check whether the specified CRYP flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data 
+  *                                 or a key preparation (for AES decryption). 
+  *            @arg CRYP_FLAG_IFEM: Input FIFO is empty
+  *            @arg CRYP_FLAG_IFNF: Input FIFO is not full
+  *            @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending
+  *            @arg CRYP_FLAG_OFNE: Output FIFO is not empty
+  *            @arg CRYP_FLAG_OFFU: Output FIFO is full
+  *            @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define CRYP_FLAG_MASK  ((uint32_t)0x0000001F)
+#define __HAL_CRYP_GET_FLAG(__FLAG__) ((((uint8_t)((__FLAG__) >> 24)) == 0x01)?(((CRYP->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \
+                                                 (((CRYP->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)))
+
+/** @brief  Check whether the specified CRYP interrupt is set or not.
+  * @param  __INTERRUPT__: specifies the interrupt to check.
+  *         This parameter can be one of the following values:
+  *            @arg CRYP_IT_INRIS: Input FIFO service raw interrupt is pending
+  *            @arg CRYP_IT_OUTRIS: Output FIFO service raw interrupt is pending
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_CRYP_GET_IT(__INTERRUPT__) ((CRYP->MISR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+  * @brief  Enable the CRYP interrupt.
+  * @param  __INTERRUPT__: CRYP Interrupt.
+  * @retval None
+  */
+#define __HAL_CRYP_ENABLE_IT(__INTERRUPT__) ((CRYP->IMSCR) |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the CRYP interrupt.
+  * @param  __INTERRUPT__: CRYP interrupt.
+  * @retval None
+  */
+#define __HAL_CRYP_DISABLE_IT(__INTERRUPT__) ((CRYP->IMSCR) &= ~(__INTERRUPT__))
+
+/* Include CRYP HAL Extension module */
+#include "stm32f4xx_hal_cryp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
+
+/* AES encryption/decryption using polling  ***********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt  *********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA  ***************************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* DES encryption/decryption using polling  ***********************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+
+/* DES encryption/decryption using interrupt  *********************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* DES encryption/decryption using DMA  ***************************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* TDES encryption/decryption using polling  **********************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* TDES encryption/decryption using interrupt  ********************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* TDES encryption/decryption using DMA  **************************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* Processing functions  ******************************************************/
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
+
+/* Peripheral State functions  ************************************************/
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
+
+/* MSP functions  *************************************************************/
+void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
+
+/* CallBack functions  ********************************************************/
+void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRYP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/