The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of mbed by
TARGET_NUCLEO_F030R8/stm32f0xx_hal_pwr_ex.h
- Committer:
- Kojto
- Date:
- 2015-02-03
- Revision:
- 93:e188a91d3eaa
- Parent:
- 90:cb3d968589d8
File content as of revision 93:e188a91d3eaa:
/** ****************************************************************************** * @file stm32f0xx_hal_pwr_ex.h * @author MCD Application Team * @version V1.2.0 * @date 11-December-2014 * @brief Header file of PWR HAL Extension module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F0xx_HAL_PWR_EX_H #define __STM32F0xx_HAL_PWR_EX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f0xx_hal_def.h" /** @addtogroup STM32F0xx_HAL_Driver * @{ */ /** @addtogroup PWREx * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup PWREx_Exported_Types PWREx Exported Types * @{ */ #if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ defined (STM32F071xB) || defined (STM32F072xB) || \ defined (STM32F091xC) /** * @brief PWR PVD configuration structure definition */ typedef struct { uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level This parameter can be a value of @ref PWREx_PVD_detection_level */ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. This parameter can be a value of @ref PWREx_PVD_Mode */ }PWR_PVDTypeDef; #endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ /* defined (STM32F071xB) || defined (STM32F072xB) || */ /* defined (STM32F091xC) */ /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup PWREx_Exported_Constants PWREx Exported Constants * @{ */ /** @defgroup PWREx_WakeUp_Pins PWREx Wakeup Pins * @{ */ #if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) #define PWR_WAKEUP_PIN1 ((uint32_t)0x00) #define PWR_WAKEUP_PIN2 ((uint32_t)0x01) #define PWR_WAKEUP_PIN3 ((uint32_t)0x02) #define PWR_WAKEUP_PIN4 ((uint32_t)0x03) #define PWR_WAKEUP_PIN5 ((uint32_t)0x04) #define PWR_WAKEUP_PIN6 ((uint32_t)0x05) #define PWR_WAKEUP_PIN7 ((uint32_t)0x06) #define PWR_WAKEUP_PIN8 ((uint32_t)0x07) #define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ ((PIN) == PWR_WAKEUP_PIN2) || \ ((PIN) == PWR_WAKEUP_PIN3) || \ ((PIN) == PWR_WAKEUP_PIN4) || \ ((PIN) == PWR_WAKEUP_PIN5) || \ ((PIN) == PWR_WAKEUP_PIN6) || \ ((PIN) == PWR_WAKEUP_PIN7) || \ ((PIN) == PWR_WAKEUP_PIN8)) #else #define PWR_WAKEUP_PIN1 ((uint32_t)0x00) #define PWR_WAKEUP_PIN2 ((uint32_t)0x01) #define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ ((PIN) == PWR_WAKEUP_PIN2)) #endif /* defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || */ /* defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ /** * @} */ /** @defgroup PWREx_EXTI_Line PWREx EXTI Line * @{ */ #if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ defined (STM32F071xB) || defined (STM32F072xB) || \ defined (STM32F091xC) #define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ #endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ /* defined (STM32F071xB) || defined (STM32F072xB) || */ /* defined (STM32F091xC) */ #if defined (STM32F042x6) || defined (STM32F048xx) || \ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ defined (STM32F091xC) || defined (STM32F098xx) #define PWR_EXTI_LINE_VDDIO2 ((uint32_t)0x80000000) /*!< External interrupt line 31 Connected to the Vddio2 Monitor EXTI Line */ #endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ defined (STM32F091xC) || defined (STM32F098xx) ||*/ /** * @} */ #if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ defined (STM32F071xB) || defined (STM32F072xB) || \ defined (STM32F091xC) /** @defgroup PWREx_PVD_detection_level PWREx PVD detection level * @{ */ #define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0 #define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1 #define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2 #define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3 #define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4 #define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5 #define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6 #define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7 #define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) /** * @} */ /** @defgroup PWREx_PVD_Mode PWREx PVD Mode * @{ */ #define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */ #define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */ #define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */ #define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ #define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */ #define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */ #define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */ #define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ ((MODE) == PWR_PVD_MODE_NORMAL)) /** * @} */ #endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ /* defined (STM32F071xB) || defined (STM32F072xB) || */ /* defined (STM32F091xC) */ /** @defgroup PWREx_Flag PWREx Flag * @{ */ #if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ defined (STM32F071xB) || defined (STM32F072xB) || \ defined (STM32F091xC) #define PWR_FLAG_WU PWR_CSR_WUF #define PWR_FLAG_SB PWR_CSR_SBF #define PWR_FLAG_PVDO PWR_CSR_PVDO #define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF #elif defined (STM32F070x6) || defined (STM32F070xB) || defined (STM32F030xC) #define PWR_FLAG_WU PWR_CSR_WUF #define PWR_FLAG_SB PWR_CSR_SBF #define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF #else #define PWR_FLAG_WU PWR_CSR_WUF #define PWR_FLAG_SB PWR_CSR_SBF #endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ /* defined (STM32F071xB) || defined (STM32F072xB) || */ /* defined (STM32F091xC) */ /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup PWREx_Exported_Macros PWREx Exported Macros * @{ */ #if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ defined (STM32F071xB) || defined (STM32F072xB) || \ defined (STM32F091xC) /** * @brief Enable interrupt on PVD Exti Line 16. * @retval None. */ #define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD)) /** * @brief Disable interrupt on PVD Exti Line 16. * @retval None. */ #define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD)) /** * @brief Enable event on PVD Exti Line 16. * @retval None. */ #define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD)) /** * @brief Disable event on PVD Exti Line 16. * @retval None. */ #define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD)) /** * @brief PVD EXTI line configuration: clear falling edge and rising edge trigger. * @retval None. */ #define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() EXTI->FTSR &= ~(PWR_EXTI_LINE_PVD); \ EXTI->RTSR &= ~(PWR_EXTI_LINE_PVD) /** * @brief PVD EXTI line configuration: set falling edge trigger. * @retval None. */ #define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (PWR_EXTI_LINE_PVD) /** * @brief PVD EXTI line configuration: set rising edge trigger. * @retval None. */ #define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER() EXTI->RTSR |= (PWR_EXTI_LINE_PVD) /** * @brief Check whether the specified PVD EXTI interrupt flag is set or not. * @retval EXTI PVD Line Status. */ #define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) /** * @brief Clear the PVD EXTI flag. * @retval None. */ #define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) /** * @brief Generate a Software interrupt on selected EXTI line. * @retval None. */ #define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD)) #endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ /* defined (STM32F071xB) || defined (STM32F072xB) || */ /* defined (STM32F091xC) */ #if defined (STM32F042x6) || defined (STM32F048xx) || \ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ defined (STM32F091xC) || defined (STM32F098xx) /** * @brief Enable interrupt on Vddio2 Monitor Exti Line 31. * @retval None. */ #define __HAL_PWR_VDDIO2_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_VDDIO2)) /** * @brief Disable interrupt on Vddio2 Monitor Exti Line 31. * @retval None. */ #define __HAL_PWR_VDDIO2_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_VDDIO2)) /** * @brief Vddio2 Monitor EXTI line configuration: clear falling edge and rising edge trigger. * @retval None. */ #define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER() EXTI->FTSR &= ~(PWR_EXTI_LINE_VDDIO2); \ EXTI->RTSR &= ~(PWR_EXTI_LINE_VDDIO2) /** * @brief Vddio2 Monitor EXTI line configuration: set falling edge trigger. * @retval None. */ #define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (PWR_EXTI_LINE_VDDIO2) /** * @brief Check whether the specified VDDIO2 monitor EXTI interrupt flag is set or not. * @retval EXTI VDDIO2 Monitor Line Status. */ #define __HAL_PWR_VDDIO2_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_VDDIO2)) /** * @brief Clear the VDDIO2 Monitor EXTI flag. * @retval None. */ #define __HAL_PWR_VDDIO2_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_VDDIO2)) /** * @brief Generate a Software interrupt on selected EXTI line. * @retval None. */ #define __HAL_PWR_VDDIO2_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_VDDIO2)) #endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ defined (STM32F091xC) || defined (STM32F098xx) */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup PWREx_Exported_Functions PWREx Exported Functions * @{ */ /** @addtogroup PWREx_Exported_Functions_Group1 * @{ */ /* I/O operation functions ***************************************************/ #if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ defined (STM32F071xB) || defined (STM32F072xB) || \ defined (STM32F091xC) void HAL_PWR_PVD_IRQHandler(void); void HAL_PWR_PVDCallback(void); #endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ /* defined (STM32F071xB) || defined (STM32F072xB) || */ /* defined (STM32F091xC) */ #if defined (STM32F042x6) || defined (STM32F048xx) || \ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ defined (STM32F091xC) || defined (STM32F098xx) void HAL_PWR_Vddio2Monitor_IRQHandler(void); void HAL_PWR_Vddio2MonitorCallback(void); #endif /* defined (STM32F042x6) || defined (STM32F048xx) || \ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ defined (STM32F091xC) || defined (STM32F098xx) */ /* Peripheral Control functions **********************************************/ #if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ defined (STM32F071xB) || defined (STM32F072xB) || \ defined (STM32F091xC) void HAL_PWR_PVDConfig(PWR_PVDTypeDef *sConfigPVD); void HAL_PWR_EnablePVD(void); void HAL_PWR_DisablePVD(void); #endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ /* defined (STM32F071xB) || defined (STM32F072xB) || */ /* defined (STM32F091xC) */ #if defined (STM32F042x6) || defined (STM32F048xx) || \ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ defined (STM32F091xC) || defined (STM32F098xx) void HAL_PWR_EnableVddio2Monitor(void); void HAL_PWR_DisableVddio2Monitor(void); #endif /* defined (STM32F042x6) || defined (STM32F048xx) || \ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \ defined (STM32F091xC) || defined (STM32F098xx) */ /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F0xx_HAL_PWR_EX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/