Egor Rumjantsev
The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of
mbed
by 
mbed official
TARGET_EFM32LG_STK3600/efm32lg_uart.h
- Committer:
- Mikchel
- Date:
- 2015-05-03
- Revision:
- 99:7f6c6de930c0
- Parent:
- 98:8ab26030e058
File content as of revision 99:7f6c6de930c0:
/**************************************************************************//**
* @file efm32lg_uart.h
* @brief EFM32LG_UART register and bit field definitions
* @version 3.20.6
******************************************************************************
* @section License
* <b>(C) Copyright 2014 Silicon Laboratories, Inc. http://www.silabs.com</b>
******************************************************************************
*
* Permission is granted to anyone to use this software for any purpose,
* including commercial applications, and to alter it and redistribute it
* freely, subject to the following restrictions:
*
* 1. The origin of this software must not be misrepresented; you must not
* claim that you wrote the original software.@n
* 2. Altered source versions must be plainly marked as such, and must not be
* misrepresented as being the original software.@n
* 3. This notice may not be removed or altered from any source distribution.
*
* DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Laboratories, Inc.
* has no obligation to support this Software. Silicon Laboratories, Inc. is
* providing the Software "AS IS", with no express or implied warranties of any
* kind, including, but not limited to, any implied warranties of
* merchantability or fitness for any particular purpose or warranties against
* infringement of any proprietary rights of a third party.
*
* Silicon Laboratories, Inc. will not be liable for any consequential,
* incidental, or special damages, or any other relief, or for any claim by
* any third party, arising from your use of this Software.
*
*****************************************************************************/
/**************************************************************************//**
* @defgroup EFM32LG_UART_BitFields
* @{
*****************************************************************************/
/* Bit fields for UART CTRL */
#define _UART_CTRL_RESETVALUE 0x00000000UL /**< Default value for UART_CTRL */
#define _UART_CTRL_MASK 0x7DFFFF7FUL /**< Mask for UART_CTRL */
#define UART_CTRL_SYNC (0x1UL << 0) /**< USART Synchronous Mode */
#define _UART_CTRL_SYNC_SHIFT 0 /**< Shift value for USART_SYNC */
#define _UART_CTRL_SYNC_MASK 0x1UL /**< Bit mask for USART_SYNC */
#define _UART_CTRL_SYNC_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_SYNC_DEFAULT (_UART_CTRL_SYNC_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_LOOPBK (0x1UL << 1) /**< Loopback Enable */
#define _UART_CTRL_LOOPBK_SHIFT 1 /**< Shift value for USART_LOOPBK */
#define _UART_CTRL_LOOPBK_MASK 0x2UL /**< Bit mask for USART_LOOPBK */
#define _UART_CTRL_LOOPBK_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_LOOPBK_DEFAULT (_UART_CTRL_LOOPBK_DEFAULT << 1) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_CCEN (0x1UL << 2) /**< Collision Check Enable */
#define _UART_CTRL_CCEN_SHIFT 2 /**< Shift value for USART_CCEN */
#define _UART_CTRL_CCEN_MASK 0x4UL /**< Bit mask for USART_CCEN */
#define _UART_CTRL_CCEN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_CCEN_DEFAULT (_UART_CTRL_CCEN_DEFAULT << 2) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_MPM (0x1UL << 3) /**< Multi-Processor Mode */
#define _UART_CTRL_MPM_SHIFT 3 /**< Shift value for USART_MPM */
#define _UART_CTRL_MPM_MASK 0x8UL /**< Bit mask for USART_MPM */
#define _UART_CTRL_MPM_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_MPM_DEFAULT (_UART_CTRL_MPM_DEFAULT << 3) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_MPAB (0x1UL << 4) /**< Multi-Processor Address-Bit */
#define _UART_CTRL_MPAB_SHIFT 4 /**< Shift value for USART_MPAB */
#define _UART_CTRL_MPAB_MASK 0x10UL /**< Bit mask for USART_MPAB */
#define _UART_CTRL_MPAB_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_MPAB_DEFAULT (_UART_CTRL_MPAB_DEFAULT << 4) /**< Shifted mode DEFAULT for UART_CTRL */
#define _UART_CTRL_OVS_SHIFT 5 /**< Shift value for USART_OVS */
#define _UART_CTRL_OVS_MASK 0x60UL /**< Bit mask for USART_OVS */
#define _UART_CTRL_OVS_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define _UART_CTRL_OVS_X16 0x00000000UL /**< Mode X16 for UART_CTRL */
#define _UART_CTRL_OVS_X8 0x00000001UL /**< Mode X8 for UART_CTRL */
#define _UART_CTRL_OVS_X6 0x00000002UL /**< Mode X6 for UART_CTRL */
#define _UART_CTRL_OVS_X4 0x00000003UL /**< Mode X4 for UART_CTRL */
#define UART_CTRL_OVS_DEFAULT (_UART_CTRL_OVS_DEFAULT << 5) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_OVS_X16 (_UART_CTRL_OVS_X16 << 5) /**< Shifted mode X16 for UART_CTRL */
#define UART_CTRL_OVS_X8 (_UART_CTRL_OVS_X8 << 5) /**< Shifted mode X8 for UART_CTRL */
#define UART_CTRL_OVS_X6 (_UART_CTRL_OVS_X6 << 5) /**< Shifted mode X6 for UART_CTRL */
#define UART_CTRL_OVS_X4 (_UART_CTRL_OVS_X4 << 5) /**< Shifted mode X4 for UART_CTRL */
#define UART_CTRL_CLKPOL (0x1UL << 8) /**< Clock Polarity */
#define _UART_CTRL_CLKPOL_SHIFT 8 /**< Shift value for USART_CLKPOL */
#define _UART_CTRL_CLKPOL_MASK 0x100UL /**< Bit mask for USART_CLKPOL */
#define _UART_CTRL_CLKPOL_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define _UART_CTRL_CLKPOL_IDLELOW 0x00000000UL /**< Mode IDLELOW for UART_CTRL */
#define _UART_CTRL_CLKPOL_IDLEHIGH 0x00000001UL /**< Mode IDLEHIGH for UART_CTRL */
#define UART_CTRL_CLKPOL_DEFAULT (_UART_CTRL_CLKPOL_DEFAULT << 8) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_CLKPOL_IDLELOW (_UART_CTRL_CLKPOL_IDLELOW << 8) /**< Shifted mode IDLELOW for UART_CTRL */
#define UART_CTRL_CLKPOL_IDLEHIGH (_UART_CTRL_CLKPOL_IDLEHIGH << 8) /**< Shifted mode IDLEHIGH for UART_CTRL */
#define UART_CTRL_CLKPHA (0x1UL << 9) /**< Clock Edge For Setup/Sample */
#define _UART_CTRL_CLKPHA_SHIFT 9 /**< Shift value for USART_CLKPHA */
#define _UART_CTRL_CLKPHA_MASK 0x200UL /**< Bit mask for USART_CLKPHA */
#define _UART_CTRL_CLKPHA_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define _UART_CTRL_CLKPHA_SAMPLELEADING 0x00000000UL /**< Mode SAMPLELEADING for UART_CTRL */
#define _UART_CTRL_CLKPHA_SAMPLETRAILING 0x00000001UL /**< Mode SAMPLETRAILING for UART_CTRL */
#define UART_CTRL_CLKPHA_DEFAULT (_UART_CTRL_CLKPHA_DEFAULT << 9) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_CLKPHA_SAMPLELEADING (_UART_CTRL_CLKPHA_SAMPLELEADING << 9) /**< Shifted mode SAMPLELEADING for UART_CTRL */
#define UART_CTRL_CLKPHA_SAMPLETRAILING (_UART_CTRL_CLKPHA_SAMPLETRAILING << 9) /**< Shifted mode SAMPLETRAILING for UART_CTRL */
#define UART_CTRL_MSBF (0x1UL << 10) /**< Most Significant Bit First */
#define _UART_CTRL_MSBF_SHIFT 10 /**< Shift value for USART_MSBF */
#define _UART_CTRL_MSBF_MASK 0x400UL /**< Bit mask for USART_MSBF */
#define _UART_CTRL_MSBF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_MSBF_DEFAULT (_UART_CTRL_MSBF_DEFAULT << 10) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_CSMA (0x1UL << 11) /**< Action On Slave-Select In Master Mode */
#define _UART_CTRL_CSMA_SHIFT 11 /**< Shift value for USART_CSMA */
#define _UART_CTRL_CSMA_MASK 0x800UL /**< Bit mask for USART_CSMA */
#define _UART_CTRL_CSMA_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define _UART_CTRL_CSMA_NOACTION 0x00000000UL /**< Mode NOACTION for UART_CTRL */
#define _UART_CTRL_CSMA_GOTOSLAVEMODE 0x00000001UL /**< Mode GOTOSLAVEMODE for UART_CTRL */
#define UART_CTRL_CSMA_DEFAULT (_UART_CTRL_CSMA_DEFAULT << 11) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_CSMA_NOACTION (_UART_CTRL_CSMA_NOACTION << 11) /**< Shifted mode NOACTION for UART_CTRL */
#define UART_CTRL_CSMA_GOTOSLAVEMODE (_UART_CTRL_CSMA_GOTOSLAVEMODE << 11) /**< Shifted mode GOTOSLAVEMODE for UART_CTRL */
#define UART_CTRL_TXBIL (0x1UL << 12) /**< TX Buffer Interrupt Level */
#define _UART_CTRL_TXBIL_SHIFT 12 /**< Shift value for USART_TXBIL */
#define _UART_CTRL_TXBIL_MASK 0x1000UL /**< Bit mask for USART_TXBIL */
#define _UART_CTRL_TXBIL_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define _UART_CTRL_TXBIL_EMPTY 0x00000000UL /**< Mode EMPTY for UART_CTRL */
#define _UART_CTRL_TXBIL_HALFFULL 0x00000001UL /**< Mode HALFFULL for UART_CTRL */
#define UART_CTRL_TXBIL_DEFAULT (_UART_CTRL_TXBIL_DEFAULT << 12) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_TXBIL_EMPTY (_UART_CTRL_TXBIL_EMPTY << 12) /**< Shifted mode EMPTY for UART_CTRL */
#define UART_CTRL_TXBIL_HALFFULL (_UART_CTRL_TXBIL_HALFFULL << 12) /**< Shifted mode HALFFULL for UART_CTRL */
#define UART_CTRL_RXINV (0x1UL << 13) /**< Receiver Input Invert */
#define _UART_CTRL_RXINV_SHIFT 13 /**< Shift value for USART_RXINV */
#define _UART_CTRL_RXINV_MASK 0x2000UL /**< Bit mask for USART_RXINV */
#define _UART_CTRL_RXINV_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_RXINV_DEFAULT (_UART_CTRL_RXINV_DEFAULT << 13) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_TXINV (0x1UL << 14) /**< Transmitter output Invert */
#define _UART_CTRL_TXINV_SHIFT 14 /**< Shift value for USART_TXINV */
#define _UART_CTRL_TXINV_MASK 0x4000UL /**< Bit mask for USART_TXINV */
#define _UART_CTRL_TXINV_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_TXINV_DEFAULT (_UART_CTRL_TXINV_DEFAULT << 14) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_CSINV (0x1UL << 15) /**< Chip Select Invert */
#define _UART_CTRL_CSINV_SHIFT 15 /**< Shift value for USART_CSINV */
#define _UART_CTRL_CSINV_MASK 0x8000UL /**< Bit mask for USART_CSINV */
#define _UART_CTRL_CSINV_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_CSINV_DEFAULT (_UART_CTRL_CSINV_DEFAULT << 15) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_AUTOCS (0x1UL << 16) /**< Automatic Chip Select */
#define _UART_CTRL_AUTOCS_SHIFT 16 /**< Shift value for USART_AUTOCS */
#define _UART_CTRL_AUTOCS_MASK 0x10000UL /**< Bit mask for USART_AUTOCS */
#define _UART_CTRL_AUTOCS_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_AUTOCS_DEFAULT (_UART_CTRL_AUTOCS_DEFAULT << 16) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_AUTOTRI (0x1UL << 17) /**< Automatic TX Tristate */
#define _UART_CTRL_AUTOTRI_SHIFT 17 /**< Shift value for USART_AUTOTRI */
#define _UART_CTRL_AUTOTRI_MASK 0x20000UL /**< Bit mask for USART_AUTOTRI */
#define _UART_CTRL_AUTOTRI_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_AUTOTRI_DEFAULT (_UART_CTRL_AUTOTRI_DEFAULT << 17) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_SCMODE (0x1UL << 18) /**< SmartCard Mode */
#define _UART_CTRL_SCMODE_SHIFT 18 /**< Shift value for USART_SCMODE */
#define _UART_CTRL_SCMODE_MASK 0x40000UL /**< Bit mask for USART_SCMODE */
#define _UART_CTRL_SCMODE_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_SCMODE_DEFAULT (_UART_CTRL_SCMODE_DEFAULT << 18) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_SCRETRANS (0x1UL << 19) /**< SmartCard Retransmit */
#define _UART_CTRL_SCRETRANS_SHIFT 19 /**< Shift value for USART_SCRETRANS */
#define _UART_CTRL_SCRETRANS_MASK 0x80000UL /**< Bit mask for USART_SCRETRANS */
#define _UART_CTRL_SCRETRANS_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_SCRETRANS_DEFAULT (_UART_CTRL_SCRETRANS_DEFAULT << 19) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_SKIPPERRF (0x1UL << 20) /**< Skip Parity Error Frames */
#define _UART_CTRL_SKIPPERRF_SHIFT 20 /**< Shift value for USART_SKIPPERRF */
#define _UART_CTRL_SKIPPERRF_MASK 0x100000UL /**< Bit mask for USART_SKIPPERRF */
#define _UART_CTRL_SKIPPERRF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_SKIPPERRF_DEFAULT (_UART_CTRL_SKIPPERRF_DEFAULT << 20) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_BIT8DV (0x1UL << 21) /**< Bit 8 Default Value */
#define _UART_CTRL_BIT8DV_SHIFT 21 /**< Shift value for USART_BIT8DV */
#define _UART_CTRL_BIT8DV_MASK 0x200000UL /**< Bit mask for USART_BIT8DV */
#define _UART_CTRL_BIT8DV_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_BIT8DV_DEFAULT (_UART_CTRL_BIT8DV_DEFAULT << 21) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_ERRSDMA (0x1UL << 22) /**< Halt DMA On Error */
#define _UART_CTRL_ERRSDMA_SHIFT 22 /**< Shift value for USART_ERRSDMA */
#define _UART_CTRL_ERRSDMA_MASK 0x400000UL /**< Bit mask for USART_ERRSDMA */
#define _UART_CTRL_ERRSDMA_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_ERRSDMA_DEFAULT (_UART_CTRL_ERRSDMA_DEFAULT << 22) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_ERRSRX (0x1UL << 23) /**< Disable RX On Error */
#define _UART_CTRL_ERRSRX_SHIFT 23 /**< Shift value for USART_ERRSRX */
#define _UART_CTRL_ERRSRX_MASK 0x800000UL /**< Bit mask for USART_ERRSRX */
#define _UART_CTRL_ERRSRX_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_ERRSRX_DEFAULT (_UART_CTRL_ERRSRX_DEFAULT << 23) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_ERRSTX (0x1UL << 24) /**< Disable TX On Error */
#define _UART_CTRL_ERRSTX_SHIFT 24 /**< Shift value for USART_ERRSTX */
#define _UART_CTRL_ERRSTX_MASK 0x1000000UL /**< Bit mask for USART_ERRSTX */
#define _UART_CTRL_ERRSTX_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_ERRSTX_DEFAULT (_UART_CTRL_ERRSTX_DEFAULT << 24) /**< Shifted mode DEFAULT for UART_CTRL */
#define _UART_CTRL_TXDELAY_SHIFT 26 /**< Shift value for USART_TXDELAY */
#define _UART_CTRL_TXDELAY_MASK 0xC000000UL /**< Bit mask for USART_TXDELAY */
#define _UART_CTRL_TXDELAY_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define _UART_CTRL_TXDELAY_NONE 0x00000000UL /**< Mode NONE for UART_CTRL */
#define _UART_CTRL_TXDELAY_SINGLE 0x00000001UL /**< Mode SINGLE for UART_CTRL */
#define _UART_CTRL_TXDELAY_DOUBLE 0x00000002UL /**< Mode DOUBLE for UART_CTRL */
#define _UART_CTRL_TXDELAY_TRIPLE 0x00000003UL /**< Mode TRIPLE for UART_CTRL */
#define UART_CTRL_TXDELAY_DEFAULT (_UART_CTRL_TXDELAY_DEFAULT << 26) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_TXDELAY_NONE (_UART_CTRL_TXDELAY_NONE << 26) /**< Shifted mode NONE for UART_CTRL */
#define UART_CTRL_TXDELAY_SINGLE (_UART_CTRL_TXDELAY_SINGLE << 26) /**< Shifted mode SINGLE for UART_CTRL */
#define UART_CTRL_TXDELAY_DOUBLE (_UART_CTRL_TXDELAY_DOUBLE << 26) /**< Shifted mode DOUBLE for UART_CTRL */
#define UART_CTRL_TXDELAY_TRIPLE (_UART_CTRL_TXDELAY_TRIPLE << 26) /**< Shifted mode TRIPLE for UART_CTRL */
#define UART_CTRL_BYTESWAP (0x1UL << 28) /**< Byteswap In Double Accesses */
#define _UART_CTRL_BYTESWAP_SHIFT 28 /**< Shift value for USART_BYTESWAP */
#define _UART_CTRL_BYTESWAP_MASK 0x10000000UL /**< Bit mask for USART_BYTESWAP */
#define _UART_CTRL_BYTESWAP_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_BYTESWAP_DEFAULT (_UART_CTRL_BYTESWAP_DEFAULT << 28) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_AUTOTX (0x1UL << 29) /**< Always Transmit When RX Not Full */
#define _UART_CTRL_AUTOTX_SHIFT 29 /**< Shift value for USART_AUTOTX */
#define _UART_CTRL_AUTOTX_MASK 0x20000000UL /**< Bit mask for USART_AUTOTX */
#define _UART_CTRL_AUTOTX_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_AUTOTX_DEFAULT (_UART_CTRL_AUTOTX_DEFAULT << 29) /**< Shifted mode DEFAULT for UART_CTRL */
#define UART_CTRL_MVDIS (0x1UL << 30) /**< Majority Vote Disable */
#define _UART_CTRL_MVDIS_SHIFT 30 /**< Shift value for USART_MVDIS */
#define _UART_CTRL_MVDIS_MASK 0x40000000UL /**< Bit mask for USART_MVDIS */
#define _UART_CTRL_MVDIS_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CTRL */
#define UART_CTRL_MVDIS_DEFAULT (_UART_CTRL_MVDIS_DEFAULT << 30) /**< Shifted mode DEFAULT for UART_CTRL */
/* Bit fields for UART FRAME */
#define _UART_FRAME_RESETVALUE 0x00001005UL /**< Default value for UART_FRAME */
#define _UART_FRAME_MASK 0x0000330FUL /**< Mask for UART_FRAME */
#define _UART_FRAME_DATABITS_SHIFT 0 /**< Shift value for USART_DATABITS */
#define _UART_FRAME_DATABITS_MASK 0xFUL /**< Bit mask for USART_DATABITS */
#define _UART_FRAME_DATABITS_FOUR 0x00000001UL /**< Mode FOUR for UART_FRAME */
#define _UART_FRAME_DATABITS_FIVE 0x00000002UL /**< Mode FIVE for UART_FRAME */
#define _UART_FRAME_DATABITS_SIX 0x00000003UL /**< Mode SIX for UART_FRAME */
#define _UART_FRAME_DATABITS_SEVEN 0x00000004UL /**< Mode SEVEN for UART_FRAME */
#define _UART_FRAME_DATABITS_DEFAULT 0x00000005UL /**< Mode DEFAULT for UART_FRAME */
#define _UART_FRAME_DATABITS_EIGHT 0x00000005UL /**< Mode EIGHT for UART_FRAME */
#define _UART_FRAME_DATABITS_NINE 0x00000006UL /**< Mode NINE for UART_FRAME */
#define _UART_FRAME_DATABITS_TEN 0x00000007UL /**< Mode TEN for UART_FRAME */
#define _UART_FRAME_DATABITS_ELEVEN 0x00000008UL /**< Mode ELEVEN for UART_FRAME */
#define _UART_FRAME_DATABITS_TWELVE 0x00000009UL /**< Mode TWELVE for UART_FRAME */
#define _UART_FRAME_DATABITS_THIRTEEN 0x0000000AUL /**< Mode THIRTEEN for UART_FRAME */
#define _UART_FRAME_DATABITS_FOURTEEN 0x0000000BUL /**< Mode FOURTEEN for UART_FRAME */
#define _UART_FRAME_DATABITS_FIFTEEN 0x0000000CUL /**< Mode FIFTEEN for UART_FRAME */
#define _UART_FRAME_DATABITS_SIXTEEN 0x0000000DUL /**< Mode SIXTEEN for UART_FRAME */
#define UART_FRAME_DATABITS_FOUR (_UART_FRAME_DATABITS_FOUR << 0) /**< Shifted mode FOUR for UART_FRAME */
#define UART_FRAME_DATABITS_FIVE (_UART_FRAME_DATABITS_FIVE << 0) /**< Shifted mode FIVE for UART_FRAME */
#define UART_FRAME_DATABITS_SIX (_UART_FRAME_DATABITS_SIX << 0) /**< Shifted mode SIX for UART_FRAME */
#define UART_FRAME_DATABITS_SEVEN (_UART_FRAME_DATABITS_SEVEN << 0) /**< Shifted mode SEVEN for UART_FRAME */
#define UART_FRAME_DATABITS_DEFAULT (_UART_FRAME_DATABITS_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_FRAME */
#define UART_FRAME_DATABITS_EIGHT (_UART_FRAME_DATABITS_EIGHT << 0) /**< Shifted mode EIGHT for UART_FRAME */
#define UART_FRAME_DATABITS_NINE (_UART_FRAME_DATABITS_NINE << 0) /**< Shifted mode NINE for UART_FRAME */
#define UART_FRAME_DATABITS_TEN (_UART_FRAME_DATABITS_TEN << 0) /**< Shifted mode TEN for UART_FRAME */
#define UART_FRAME_DATABITS_ELEVEN (_UART_FRAME_DATABITS_ELEVEN << 0) /**< Shifted mode ELEVEN for UART_FRAME */
#define UART_FRAME_DATABITS_TWELVE (_UART_FRAME_DATABITS_TWELVE << 0) /**< Shifted mode TWELVE for UART_FRAME */
#define UART_FRAME_DATABITS_THIRTEEN (_UART_FRAME_DATABITS_THIRTEEN << 0) /**< Shifted mode THIRTEEN for UART_FRAME */
#define UART_FRAME_DATABITS_FOURTEEN (_UART_FRAME_DATABITS_FOURTEEN << 0) /**< Shifted mode FOURTEEN for UART_FRAME */
#define UART_FRAME_DATABITS_FIFTEEN (_UART_FRAME_DATABITS_FIFTEEN << 0) /**< Shifted mode FIFTEEN for UART_FRAME */
#define UART_FRAME_DATABITS_SIXTEEN (_UART_FRAME_DATABITS_SIXTEEN << 0) /**< Shifted mode SIXTEEN for UART_FRAME */
#define _UART_FRAME_PARITY_SHIFT 8 /**< Shift value for USART_PARITY */
#define _UART_FRAME_PARITY_MASK 0x300UL /**< Bit mask for USART_PARITY */
#define _UART_FRAME_PARITY_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_FRAME */
#define _UART_FRAME_PARITY_NONE 0x00000000UL /**< Mode NONE for UART_FRAME */
#define _UART_FRAME_PARITY_EVEN 0x00000002UL /**< Mode EVEN for UART_FRAME */
#define _UART_FRAME_PARITY_ODD 0x00000003UL /**< Mode ODD for UART_FRAME */
#define UART_FRAME_PARITY_DEFAULT (_UART_FRAME_PARITY_DEFAULT << 8) /**< Shifted mode DEFAULT for UART_FRAME */
#define UART_FRAME_PARITY_NONE (_UART_FRAME_PARITY_NONE << 8) /**< Shifted mode NONE for UART_FRAME */
#define UART_FRAME_PARITY_EVEN (_UART_FRAME_PARITY_EVEN << 8) /**< Shifted mode EVEN for UART_FRAME */
#define UART_FRAME_PARITY_ODD (_UART_FRAME_PARITY_ODD << 8) /**< Shifted mode ODD for UART_FRAME */
#define _UART_FRAME_STOPBITS_SHIFT 12 /**< Shift value for USART_STOPBITS */
#define _UART_FRAME_STOPBITS_MASK 0x3000UL /**< Bit mask for USART_STOPBITS */
#define _UART_FRAME_STOPBITS_HALF 0x00000000UL /**< Mode HALF for UART_FRAME */
#define _UART_FRAME_STOPBITS_DEFAULT 0x00000001UL /**< Mode DEFAULT for UART_FRAME */
#define _UART_FRAME_STOPBITS_ONE 0x00000001UL /**< Mode ONE for UART_FRAME */
#define _UART_FRAME_STOPBITS_ONEANDAHALF 0x00000002UL /**< Mode ONEANDAHALF for UART_FRAME */
#define _UART_FRAME_STOPBITS_TWO 0x00000003UL /**< Mode TWO for UART_FRAME */
#define UART_FRAME_STOPBITS_HALF (_UART_FRAME_STOPBITS_HALF << 12) /**< Shifted mode HALF for UART_FRAME */
#define UART_FRAME_STOPBITS_DEFAULT (_UART_FRAME_STOPBITS_DEFAULT << 12) /**< Shifted mode DEFAULT for UART_FRAME */
#define UART_FRAME_STOPBITS_ONE (_UART_FRAME_STOPBITS_ONE << 12) /**< Shifted mode ONE for UART_FRAME */
#define UART_FRAME_STOPBITS_ONEANDAHALF (_UART_FRAME_STOPBITS_ONEANDAHALF << 12) /**< Shifted mode ONEANDAHALF for UART_FRAME */
#define UART_FRAME_STOPBITS_TWO (_UART_FRAME_STOPBITS_TWO << 12) /**< Shifted mode TWO for UART_FRAME */
/* Bit fields for UART TRIGCTRL */
#define _UART_TRIGCTRL_RESETVALUE 0x00000000UL /**< Default value for UART_TRIGCTRL */
#define _UART_TRIGCTRL_MASK 0x00000077UL /**< Mask for UART_TRIGCTRL */
#define _UART_TRIGCTRL_TSEL_SHIFT 0 /**< Shift value for USART_TSEL */
#define _UART_TRIGCTRL_TSEL_MASK 0x7UL /**< Bit mask for USART_TSEL */
#define _UART_TRIGCTRL_TSEL_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TRIGCTRL */
#define _UART_TRIGCTRL_TSEL_PRSCH0 0x00000000UL /**< Mode PRSCH0 for UART_TRIGCTRL */
#define _UART_TRIGCTRL_TSEL_PRSCH1 0x00000001UL /**< Mode PRSCH1 for UART_TRIGCTRL */
#define _UART_TRIGCTRL_TSEL_PRSCH2 0x00000002UL /**< Mode PRSCH2 for UART_TRIGCTRL */
#define _UART_TRIGCTRL_TSEL_PRSCH3 0x00000003UL /**< Mode PRSCH3 for UART_TRIGCTRL */
#define _UART_TRIGCTRL_TSEL_PRSCH4 0x00000004UL /**< Mode PRSCH4 for UART_TRIGCTRL */
#define _UART_TRIGCTRL_TSEL_PRSCH5 0x00000005UL /**< Mode PRSCH5 for UART_TRIGCTRL */
#define _UART_TRIGCTRL_TSEL_PRSCH6 0x00000006UL /**< Mode PRSCH6 for UART_TRIGCTRL */
#define _UART_TRIGCTRL_TSEL_PRSCH7 0x00000007UL /**< Mode PRSCH7 for UART_TRIGCTRL */
#define UART_TRIGCTRL_TSEL_DEFAULT (_UART_TRIGCTRL_TSEL_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_TRIGCTRL */
#define UART_TRIGCTRL_TSEL_PRSCH0 (_UART_TRIGCTRL_TSEL_PRSCH0 << 0) /**< Shifted mode PRSCH0 for UART_TRIGCTRL */
#define UART_TRIGCTRL_TSEL_PRSCH1 (_UART_TRIGCTRL_TSEL_PRSCH1 << 0) /**< Shifted mode PRSCH1 for UART_TRIGCTRL */
#define UART_TRIGCTRL_TSEL_PRSCH2 (_UART_TRIGCTRL_TSEL_PRSCH2 << 0) /**< Shifted mode PRSCH2 for UART_TRIGCTRL */
#define UART_TRIGCTRL_TSEL_PRSCH3 (_UART_TRIGCTRL_TSEL_PRSCH3 << 0) /**< Shifted mode PRSCH3 for UART_TRIGCTRL */
#define UART_TRIGCTRL_TSEL_PRSCH4 (_UART_TRIGCTRL_TSEL_PRSCH4 << 0) /**< Shifted mode PRSCH4 for UART_TRIGCTRL */
#define UART_TRIGCTRL_TSEL_PRSCH5 (_UART_TRIGCTRL_TSEL_PRSCH5 << 0) /**< Shifted mode PRSCH5 for UART_TRIGCTRL */
#define UART_TRIGCTRL_TSEL_PRSCH6 (_UART_TRIGCTRL_TSEL_PRSCH6 << 0) /**< Shifted mode PRSCH6 for UART_TRIGCTRL */
#define UART_TRIGCTRL_TSEL_PRSCH7 (_UART_TRIGCTRL_TSEL_PRSCH7 << 0) /**< Shifted mode PRSCH7 for UART_TRIGCTRL */
#define UART_TRIGCTRL_RXTEN (0x1UL << 4) /**< Receive Trigger Enable */
#define _UART_TRIGCTRL_RXTEN_SHIFT 4 /**< Shift value for USART_RXTEN */
#define _UART_TRIGCTRL_RXTEN_MASK 0x10UL /**< Bit mask for USART_RXTEN */
#define _UART_TRIGCTRL_RXTEN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TRIGCTRL */
#define UART_TRIGCTRL_RXTEN_DEFAULT (_UART_TRIGCTRL_RXTEN_DEFAULT << 4) /**< Shifted mode DEFAULT for UART_TRIGCTRL */
#define UART_TRIGCTRL_TXTEN (0x1UL << 5) /**< Transmit Trigger Enable */
#define _UART_TRIGCTRL_TXTEN_SHIFT 5 /**< Shift value for USART_TXTEN */
#define _UART_TRIGCTRL_TXTEN_MASK 0x20UL /**< Bit mask for USART_TXTEN */
#define _UART_TRIGCTRL_TXTEN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TRIGCTRL */
#define UART_TRIGCTRL_TXTEN_DEFAULT (_UART_TRIGCTRL_TXTEN_DEFAULT << 5) /**< Shifted mode DEFAULT for UART_TRIGCTRL */
#define UART_TRIGCTRL_AUTOTXTEN (0x1UL << 6) /**< AUTOTX Trigger Enable */
#define _UART_TRIGCTRL_AUTOTXTEN_SHIFT 6 /**< Shift value for USART_AUTOTXTEN */
#define _UART_TRIGCTRL_AUTOTXTEN_MASK 0x40UL /**< Bit mask for USART_AUTOTXTEN */
#define _UART_TRIGCTRL_AUTOTXTEN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TRIGCTRL */
#define UART_TRIGCTRL_AUTOTXTEN_DEFAULT (_UART_TRIGCTRL_AUTOTXTEN_DEFAULT << 6) /**< Shifted mode DEFAULT for UART_TRIGCTRL */
/* Bit fields for UART CMD */
#define _UART_CMD_RESETVALUE 0x00000000UL /**< Default value for UART_CMD */
#define _UART_CMD_MASK 0x00000FFFUL /**< Mask for UART_CMD */
#define UART_CMD_RXEN (0x1UL << 0) /**< Receiver Enable */
#define _UART_CMD_RXEN_SHIFT 0 /**< Shift value for USART_RXEN */
#define _UART_CMD_RXEN_MASK 0x1UL /**< Bit mask for USART_RXEN */
#define _UART_CMD_RXEN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CMD */
#define UART_CMD_RXEN_DEFAULT (_UART_CMD_RXEN_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_CMD */
#define UART_CMD_RXDIS (0x1UL << 1) /**< Receiver Disable */
#define _UART_CMD_RXDIS_SHIFT 1 /**< Shift value for USART_RXDIS */
#define _UART_CMD_RXDIS_MASK 0x2UL /**< Bit mask for USART_RXDIS */
#define _UART_CMD_RXDIS_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CMD */
#define UART_CMD_RXDIS_DEFAULT (_UART_CMD_RXDIS_DEFAULT << 1) /**< Shifted mode DEFAULT for UART_CMD */
#define UART_CMD_TXEN (0x1UL << 2) /**< Transmitter Enable */
#define _UART_CMD_TXEN_SHIFT 2 /**< Shift value for USART_TXEN */
#define _UART_CMD_TXEN_MASK 0x4UL /**< Bit mask for USART_TXEN */
#define _UART_CMD_TXEN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CMD */
#define UART_CMD_TXEN_DEFAULT (_UART_CMD_TXEN_DEFAULT << 2) /**< Shifted mode DEFAULT for UART_CMD */
#define UART_CMD_TXDIS (0x1UL << 3) /**< Transmitter Disable */
#define _UART_CMD_TXDIS_SHIFT 3 /**< Shift value for USART_TXDIS */
#define _UART_CMD_TXDIS_MASK 0x8UL /**< Bit mask for USART_TXDIS */
#define _UART_CMD_TXDIS_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CMD */
#define UART_CMD_TXDIS_DEFAULT (_UART_CMD_TXDIS_DEFAULT << 3) /**< Shifted mode DEFAULT for UART_CMD */
#define UART_CMD_MASTEREN (0x1UL << 4) /**< Master Enable */
#define _UART_CMD_MASTEREN_SHIFT 4 /**< Shift value for USART_MASTEREN */
#define _UART_CMD_MASTEREN_MASK 0x10UL /**< Bit mask for USART_MASTEREN */
#define _UART_CMD_MASTEREN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CMD */
#define UART_CMD_MASTEREN_DEFAULT (_UART_CMD_MASTEREN_DEFAULT << 4) /**< Shifted mode DEFAULT for UART_CMD */
#define UART_CMD_MASTERDIS (0x1UL << 5) /**< Master Disable */
#define _UART_CMD_MASTERDIS_SHIFT 5 /**< Shift value for USART_MASTERDIS */
#define _UART_CMD_MASTERDIS_MASK 0x20UL /**< Bit mask for USART_MASTERDIS */
#define _UART_CMD_MASTERDIS_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CMD */
#define UART_CMD_MASTERDIS_DEFAULT (_UART_CMD_MASTERDIS_DEFAULT << 5) /**< Shifted mode DEFAULT for UART_CMD */
#define UART_CMD_RXBLOCKEN (0x1UL << 6) /**< Receiver Block Enable */
#define _UART_CMD_RXBLOCKEN_SHIFT 6 /**< Shift value for USART_RXBLOCKEN */
#define _UART_CMD_RXBLOCKEN_MASK 0x40UL /**< Bit mask for USART_RXBLOCKEN */
#define _UART_CMD_RXBLOCKEN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CMD */
#define UART_CMD_RXBLOCKEN_DEFAULT (_UART_CMD_RXBLOCKEN_DEFAULT << 6) /**< Shifted mode DEFAULT for UART_CMD */
#define UART_CMD_RXBLOCKDIS (0x1UL << 7) /**< Receiver Block Disable */
#define _UART_CMD_RXBLOCKDIS_SHIFT 7 /**< Shift value for USART_RXBLOCKDIS */
#define _UART_CMD_RXBLOCKDIS_MASK 0x80UL /**< Bit mask for USART_RXBLOCKDIS */
#define _UART_CMD_RXBLOCKDIS_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CMD */
#define UART_CMD_RXBLOCKDIS_DEFAULT (_UART_CMD_RXBLOCKDIS_DEFAULT << 7) /**< Shifted mode DEFAULT for UART_CMD */
#define UART_CMD_TXTRIEN (0x1UL << 8) /**< Transmitter Tristate Enable */
#define _UART_CMD_TXTRIEN_SHIFT 8 /**< Shift value for USART_TXTRIEN */
#define _UART_CMD_TXTRIEN_MASK 0x100UL /**< Bit mask for USART_TXTRIEN */
#define _UART_CMD_TXTRIEN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CMD */
#define UART_CMD_TXTRIEN_DEFAULT (_UART_CMD_TXTRIEN_DEFAULT << 8) /**< Shifted mode DEFAULT for UART_CMD */
#define UART_CMD_TXTRIDIS (0x1UL << 9) /**< Transmitter Tristate Disable */
#define _UART_CMD_TXTRIDIS_SHIFT 9 /**< Shift value for USART_TXTRIDIS */
#define _UART_CMD_TXTRIDIS_MASK 0x200UL /**< Bit mask for USART_TXTRIDIS */
#define _UART_CMD_TXTRIDIS_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CMD */
#define UART_CMD_TXTRIDIS_DEFAULT (_UART_CMD_TXTRIDIS_DEFAULT << 9) /**< Shifted mode DEFAULT for UART_CMD */
#define UART_CMD_CLEARTX (0x1UL << 10) /**< Clear TX */
#define _UART_CMD_CLEARTX_SHIFT 10 /**< Shift value for USART_CLEARTX */
#define _UART_CMD_CLEARTX_MASK 0x400UL /**< Bit mask for USART_CLEARTX */
#define _UART_CMD_CLEARTX_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CMD */
#define UART_CMD_CLEARTX_DEFAULT (_UART_CMD_CLEARTX_DEFAULT << 10) /**< Shifted mode DEFAULT for UART_CMD */
#define UART_CMD_CLEARRX (0x1UL << 11) /**< Clear RX */
#define _UART_CMD_CLEARRX_SHIFT 11 /**< Shift value for USART_CLEARRX */
#define _UART_CMD_CLEARRX_MASK 0x800UL /**< Bit mask for USART_CLEARRX */
#define _UART_CMD_CLEARRX_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CMD */
#define UART_CMD_CLEARRX_DEFAULT (_UART_CMD_CLEARRX_DEFAULT << 11) /**< Shifted mode DEFAULT for UART_CMD */
/* Bit fields for UART STATUS */
#define _UART_STATUS_RESETVALUE 0x00000040UL /**< Default value for UART_STATUS */
#define _UART_STATUS_MASK 0x00001FFFUL /**< Mask for UART_STATUS */
#define UART_STATUS_RXENS (0x1UL << 0) /**< Receiver Enable Status */
#define _UART_STATUS_RXENS_SHIFT 0 /**< Shift value for USART_RXENS */
#define _UART_STATUS_RXENS_MASK 0x1UL /**< Bit mask for USART_RXENS */
#define _UART_STATUS_RXENS_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_STATUS */
#define UART_STATUS_RXENS_DEFAULT (_UART_STATUS_RXENS_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_STATUS */
#define UART_STATUS_TXENS (0x1UL << 1) /**< Transmitter Enable Status */
#define _UART_STATUS_TXENS_SHIFT 1 /**< Shift value for USART_TXENS */
#define _UART_STATUS_TXENS_MASK 0x2UL /**< Bit mask for USART_TXENS */
#define _UART_STATUS_TXENS_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_STATUS */
#define UART_STATUS_TXENS_DEFAULT (_UART_STATUS_TXENS_DEFAULT << 1) /**< Shifted mode DEFAULT for UART_STATUS */
#define UART_STATUS_MASTER (0x1UL << 2) /**< SPI Master Mode */
#define _UART_STATUS_MASTER_SHIFT 2 /**< Shift value for USART_MASTER */
#define _UART_STATUS_MASTER_MASK 0x4UL /**< Bit mask for USART_MASTER */
#define _UART_STATUS_MASTER_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_STATUS */
#define UART_STATUS_MASTER_DEFAULT (_UART_STATUS_MASTER_DEFAULT << 2) /**< Shifted mode DEFAULT for UART_STATUS */
#define UART_STATUS_RXBLOCK (0x1UL << 3) /**< Block Incoming Data */
#define _UART_STATUS_RXBLOCK_SHIFT 3 /**< Shift value for USART_RXBLOCK */
#define _UART_STATUS_RXBLOCK_MASK 0x8UL /**< Bit mask for USART_RXBLOCK */
#define _UART_STATUS_RXBLOCK_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_STATUS */
#define UART_STATUS_RXBLOCK_DEFAULT (_UART_STATUS_RXBLOCK_DEFAULT << 3) /**< Shifted mode DEFAULT for UART_STATUS */
#define UART_STATUS_TXTRI (0x1UL << 4) /**< Transmitter Tristated */
#define _UART_STATUS_TXTRI_SHIFT 4 /**< Shift value for USART_TXTRI */
#define _UART_STATUS_TXTRI_MASK 0x10UL /**< Bit mask for USART_TXTRI */
#define _UART_STATUS_TXTRI_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_STATUS */
#define UART_STATUS_TXTRI_DEFAULT (_UART_STATUS_TXTRI_DEFAULT << 4) /**< Shifted mode DEFAULT for UART_STATUS */
#define UART_STATUS_TXC (0x1UL << 5) /**< TX Complete */
#define _UART_STATUS_TXC_SHIFT 5 /**< Shift value for USART_TXC */
#define _UART_STATUS_TXC_MASK 0x20UL /**< Bit mask for USART_TXC */
#define _UART_STATUS_TXC_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_STATUS */
#define UART_STATUS_TXC_DEFAULT (_UART_STATUS_TXC_DEFAULT << 5) /**< Shifted mode DEFAULT for UART_STATUS */
#define UART_STATUS_TXBL (0x1UL << 6) /**< TX Buffer Level */
#define _UART_STATUS_TXBL_SHIFT 6 /**< Shift value for USART_TXBL */
#define _UART_STATUS_TXBL_MASK 0x40UL /**< Bit mask for USART_TXBL */
#define _UART_STATUS_TXBL_DEFAULT 0x00000001UL /**< Mode DEFAULT for UART_STATUS */
#define UART_STATUS_TXBL_DEFAULT (_UART_STATUS_TXBL_DEFAULT << 6) /**< Shifted mode DEFAULT for UART_STATUS */
#define UART_STATUS_RXDATAV (0x1UL << 7) /**< RX Data Valid */
#define _UART_STATUS_RXDATAV_SHIFT 7 /**< Shift value for USART_RXDATAV */
#define _UART_STATUS_RXDATAV_MASK 0x80UL /**< Bit mask for USART_RXDATAV */
#define _UART_STATUS_RXDATAV_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_STATUS */
#define UART_STATUS_RXDATAV_DEFAULT (_UART_STATUS_RXDATAV_DEFAULT << 7) /**< Shifted mode DEFAULT for UART_STATUS */
#define UART_STATUS_RXFULL (0x1UL << 8) /**< RX FIFO Full */
#define _UART_STATUS_RXFULL_SHIFT 8 /**< Shift value for USART_RXFULL */
#define _UART_STATUS_RXFULL_MASK 0x100UL /**< Bit mask for USART_RXFULL */
#define _UART_STATUS_RXFULL_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_STATUS */
#define UART_STATUS_RXFULL_DEFAULT (_UART_STATUS_RXFULL_DEFAULT << 8) /**< Shifted mode DEFAULT for UART_STATUS */
#define UART_STATUS_TXBDRIGHT (0x1UL << 9) /**< TX Buffer Expects Double Right Data */
#define _UART_STATUS_TXBDRIGHT_SHIFT 9 /**< Shift value for USART_TXBDRIGHT */
#define _UART_STATUS_TXBDRIGHT_MASK 0x200UL /**< Bit mask for USART_TXBDRIGHT */
#define _UART_STATUS_TXBDRIGHT_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_STATUS */
#define UART_STATUS_TXBDRIGHT_DEFAULT (_UART_STATUS_TXBDRIGHT_DEFAULT << 9) /**< Shifted mode DEFAULT for UART_STATUS */
#define UART_STATUS_TXBSRIGHT (0x1UL << 10) /**< TX Buffer Expects Single Right Data */
#define _UART_STATUS_TXBSRIGHT_SHIFT 10 /**< Shift value for USART_TXBSRIGHT */
#define _UART_STATUS_TXBSRIGHT_MASK 0x400UL /**< Bit mask for USART_TXBSRIGHT */
#define _UART_STATUS_TXBSRIGHT_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_STATUS */
#define UART_STATUS_TXBSRIGHT_DEFAULT (_UART_STATUS_TXBSRIGHT_DEFAULT << 10) /**< Shifted mode DEFAULT for UART_STATUS */
#define UART_STATUS_RXDATAVRIGHT (0x1UL << 11) /**< RX Data Right */
#define _UART_STATUS_RXDATAVRIGHT_SHIFT 11 /**< Shift value for USART_RXDATAVRIGHT */
#define _UART_STATUS_RXDATAVRIGHT_MASK 0x800UL /**< Bit mask for USART_RXDATAVRIGHT */
#define _UART_STATUS_RXDATAVRIGHT_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_STATUS */
#define UART_STATUS_RXDATAVRIGHT_DEFAULT (_UART_STATUS_RXDATAVRIGHT_DEFAULT << 11) /**< Shifted mode DEFAULT for UART_STATUS */
#define UART_STATUS_RXFULLRIGHT (0x1UL << 12) /**< RX Full of Right Data */
#define _UART_STATUS_RXFULLRIGHT_SHIFT 12 /**< Shift value for USART_RXFULLRIGHT */
#define _UART_STATUS_RXFULLRIGHT_MASK 0x1000UL /**< Bit mask for USART_RXFULLRIGHT */
#define _UART_STATUS_RXFULLRIGHT_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_STATUS */
#define UART_STATUS_RXFULLRIGHT_DEFAULT (_UART_STATUS_RXFULLRIGHT_DEFAULT << 12) /**< Shifted mode DEFAULT for UART_STATUS */
/* Bit fields for UART CLKDIV */
#define _UART_CLKDIV_RESETVALUE 0x00000000UL /**< Default value for UART_CLKDIV */
#define _UART_CLKDIV_MASK 0x001FFFC0UL /**< Mask for UART_CLKDIV */
#define _UART_CLKDIV_DIV_SHIFT 6 /**< Shift value for USART_DIV */
#define _UART_CLKDIV_DIV_MASK 0x1FFFC0UL /**< Bit mask for USART_DIV */
#define _UART_CLKDIV_DIV_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_CLKDIV */
#define UART_CLKDIV_DIV_DEFAULT (_UART_CLKDIV_DIV_DEFAULT << 6) /**< Shifted mode DEFAULT for UART_CLKDIV */
/* Bit fields for UART RXDATAX */
#define _UART_RXDATAX_RESETVALUE 0x00000000UL /**< Default value for UART_RXDATAX */
#define _UART_RXDATAX_MASK 0x0000C1FFUL /**< Mask for UART_RXDATAX */
#define _UART_RXDATAX_RXDATA_SHIFT 0 /**< Shift value for USART_RXDATA */
#define _UART_RXDATAX_RXDATA_MASK 0x1FFUL /**< Bit mask for USART_RXDATA */
#define _UART_RXDATAX_RXDATA_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDATAX */
#define UART_RXDATAX_RXDATA_DEFAULT (_UART_RXDATAX_RXDATA_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_RXDATAX */
#define UART_RXDATAX_PERR (0x1UL << 14) /**< Data Parity Error */
#define _UART_RXDATAX_PERR_SHIFT 14 /**< Shift value for USART_PERR */
#define _UART_RXDATAX_PERR_MASK 0x4000UL /**< Bit mask for USART_PERR */
#define _UART_RXDATAX_PERR_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDATAX */
#define UART_RXDATAX_PERR_DEFAULT (_UART_RXDATAX_PERR_DEFAULT << 14) /**< Shifted mode DEFAULT for UART_RXDATAX */
#define UART_RXDATAX_FERR (0x1UL << 15) /**< Data Framing Error */
#define _UART_RXDATAX_FERR_SHIFT 15 /**< Shift value for USART_FERR */
#define _UART_RXDATAX_FERR_MASK 0x8000UL /**< Bit mask for USART_FERR */
#define _UART_RXDATAX_FERR_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDATAX */
#define UART_RXDATAX_FERR_DEFAULT (_UART_RXDATAX_FERR_DEFAULT << 15) /**< Shifted mode DEFAULT for UART_RXDATAX */
/* Bit fields for UART RXDATA */
#define _UART_RXDATA_RESETVALUE 0x00000000UL /**< Default value for UART_RXDATA */
#define _UART_RXDATA_MASK 0x000000FFUL /**< Mask for UART_RXDATA */
#define _UART_RXDATA_RXDATA_SHIFT 0 /**< Shift value for USART_RXDATA */
#define _UART_RXDATA_RXDATA_MASK 0xFFUL /**< Bit mask for USART_RXDATA */
#define _UART_RXDATA_RXDATA_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDATA */
#define UART_RXDATA_RXDATA_DEFAULT (_UART_RXDATA_RXDATA_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_RXDATA */
/* Bit fields for UART RXDOUBLEX */
#define _UART_RXDOUBLEX_RESETVALUE 0x00000000UL /**< Default value for UART_RXDOUBLEX */
#define _UART_RXDOUBLEX_MASK 0xC1FFC1FFUL /**< Mask for UART_RXDOUBLEX */
#define _UART_RXDOUBLEX_RXDATA0_SHIFT 0 /**< Shift value for USART_RXDATA0 */
#define _UART_RXDOUBLEX_RXDATA0_MASK 0x1FFUL /**< Bit mask for USART_RXDATA0 */
#define _UART_RXDOUBLEX_RXDATA0_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDOUBLEX */
#define UART_RXDOUBLEX_RXDATA0_DEFAULT (_UART_RXDOUBLEX_RXDATA0_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_RXDOUBLEX */
#define UART_RXDOUBLEX_PERR0 (0x1UL << 14) /**< Data Parity Error 0 */
#define _UART_RXDOUBLEX_PERR0_SHIFT 14 /**< Shift value for USART_PERR0 */
#define _UART_RXDOUBLEX_PERR0_MASK 0x4000UL /**< Bit mask for USART_PERR0 */
#define _UART_RXDOUBLEX_PERR0_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDOUBLEX */
#define UART_RXDOUBLEX_PERR0_DEFAULT (_UART_RXDOUBLEX_PERR0_DEFAULT << 14) /**< Shifted mode DEFAULT for UART_RXDOUBLEX */
#define UART_RXDOUBLEX_FERR0 (0x1UL << 15) /**< Data Framing Error 0 */
#define _UART_RXDOUBLEX_FERR0_SHIFT 15 /**< Shift value for USART_FERR0 */
#define _UART_RXDOUBLEX_FERR0_MASK 0x8000UL /**< Bit mask for USART_FERR0 */
#define _UART_RXDOUBLEX_FERR0_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDOUBLEX */
#define UART_RXDOUBLEX_FERR0_DEFAULT (_UART_RXDOUBLEX_FERR0_DEFAULT << 15) /**< Shifted mode DEFAULT for UART_RXDOUBLEX */
#define _UART_RXDOUBLEX_RXDATA1_SHIFT 16 /**< Shift value for USART_RXDATA1 */
#define _UART_RXDOUBLEX_RXDATA1_MASK 0x1FF0000UL /**< Bit mask for USART_RXDATA1 */
#define _UART_RXDOUBLEX_RXDATA1_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDOUBLEX */
#define UART_RXDOUBLEX_RXDATA1_DEFAULT (_UART_RXDOUBLEX_RXDATA1_DEFAULT << 16) /**< Shifted mode DEFAULT for UART_RXDOUBLEX */
#define UART_RXDOUBLEX_PERR1 (0x1UL << 30) /**< Data Parity Error 1 */
#define _UART_RXDOUBLEX_PERR1_SHIFT 30 /**< Shift value for USART_PERR1 */
#define _UART_RXDOUBLEX_PERR1_MASK 0x40000000UL /**< Bit mask for USART_PERR1 */
#define _UART_RXDOUBLEX_PERR1_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDOUBLEX */
#define UART_RXDOUBLEX_PERR1_DEFAULT (_UART_RXDOUBLEX_PERR1_DEFAULT << 30) /**< Shifted mode DEFAULT for UART_RXDOUBLEX */
#define UART_RXDOUBLEX_FERR1 (0x1UL << 31) /**< Data Framing Error 1 */
#define _UART_RXDOUBLEX_FERR1_SHIFT 31 /**< Shift value for USART_FERR1 */
#define _UART_RXDOUBLEX_FERR1_MASK 0x80000000UL /**< Bit mask for USART_FERR1 */
#define _UART_RXDOUBLEX_FERR1_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDOUBLEX */
#define UART_RXDOUBLEX_FERR1_DEFAULT (_UART_RXDOUBLEX_FERR1_DEFAULT << 31) /**< Shifted mode DEFAULT for UART_RXDOUBLEX */
/* Bit fields for UART RXDOUBLE */
#define _UART_RXDOUBLE_RESETVALUE 0x00000000UL /**< Default value for UART_RXDOUBLE */
#define _UART_RXDOUBLE_MASK 0x0000FFFFUL /**< Mask for UART_RXDOUBLE */
#define _UART_RXDOUBLE_RXDATA0_SHIFT 0 /**< Shift value for USART_RXDATA0 */
#define _UART_RXDOUBLE_RXDATA0_MASK 0xFFUL /**< Bit mask for USART_RXDATA0 */
#define _UART_RXDOUBLE_RXDATA0_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDOUBLE */
#define UART_RXDOUBLE_RXDATA0_DEFAULT (_UART_RXDOUBLE_RXDATA0_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_RXDOUBLE */
#define _UART_RXDOUBLE_RXDATA1_SHIFT 8 /**< Shift value for USART_RXDATA1 */
#define _UART_RXDOUBLE_RXDATA1_MASK 0xFF00UL /**< Bit mask for USART_RXDATA1 */
#define _UART_RXDOUBLE_RXDATA1_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDOUBLE */
#define UART_RXDOUBLE_RXDATA1_DEFAULT (_UART_RXDOUBLE_RXDATA1_DEFAULT << 8) /**< Shifted mode DEFAULT for UART_RXDOUBLE */
/* Bit fields for UART RXDATAXP */
#define _UART_RXDATAXP_RESETVALUE 0x00000000UL /**< Default value for UART_RXDATAXP */
#define _UART_RXDATAXP_MASK 0x0000C1FFUL /**< Mask for UART_RXDATAXP */
#define _UART_RXDATAXP_RXDATAP_SHIFT 0 /**< Shift value for USART_RXDATAP */
#define _UART_RXDATAXP_RXDATAP_MASK 0x1FFUL /**< Bit mask for USART_RXDATAP */
#define _UART_RXDATAXP_RXDATAP_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDATAXP */
#define UART_RXDATAXP_RXDATAP_DEFAULT (_UART_RXDATAXP_RXDATAP_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_RXDATAXP */
#define UART_RXDATAXP_PERRP (0x1UL << 14) /**< Data Parity Error Peek */
#define _UART_RXDATAXP_PERRP_SHIFT 14 /**< Shift value for USART_PERRP */
#define _UART_RXDATAXP_PERRP_MASK 0x4000UL /**< Bit mask for USART_PERRP */
#define _UART_RXDATAXP_PERRP_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDATAXP */
#define UART_RXDATAXP_PERRP_DEFAULT (_UART_RXDATAXP_PERRP_DEFAULT << 14) /**< Shifted mode DEFAULT for UART_RXDATAXP */
#define UART_RXDATAXP_FERRP (0x1UL << 15) /**< Data Framing Error Peek */
#define _UART_RXDATAXP_FERRP_SHIFT 15 /**< Shift value for USART_FERRP */
#define _UART_RXDATAXP_FERRP_MASK 0x8000UL /**< Bit mask for USART_FERRP */
#define _UART_RXDATAXP_FERRP_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDATAXP */
#define UART_RXDATAXP_FERRP_DEFAULT (_UART_RXDATAXP_FERRP_DEFAULT << 15) /**< Shifted mode DEFAULT for UART_RXDATAXP */
/* Bit fields for UART RXDOUBLEXP */
#define _UART_RXDOUBLEXP_RESETVALUE 0x00000000UL /**< Default value for UART_RXDOUBLEXP */
#define _UART_RXDOUBLEXP_MASK 0xC1FFC1FFUL /**< Mask for UART_RXDOUBLEXP */
#define _UART_RXDOUBLEXP_RXDATAP0_SHIFT 0 /**< Shift value for USART_RXDATAP0 */
#define _UART_RXDOUBLEXP_RXDATAP0_MASK 0x1FFUL /**< Bit mask for USART_RXDATAP0 */
#define _UART_RXDOUBLEXP_RXDATAP0_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDOUBLEXP */
#define UART_RXDOUBLEXP_RXDATAP0_DEFAULT (_UART_RXDOUBLEXP_RXDATAP0_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_RXDOUBLEXP */
#define UART_RXDOUBLEXP_PERRP0 (0x1UL << 14) /**< Data Parity Error 0 Peek */
#define _UART_RXDOUBLEXP_PERRP0_SHIFT 14 /**< Shift value for USART_PERRP0 */
#define _UART_RXDOUBLEXP_PERRP0_MASK 0x4000UL /**< Bit mask for USART_PERRP0 */
#define _UART_RXDOUBLEXP_PERRP0_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDOUBLEXP */
#define UART_RXDOUBLEXP_PERRP0_DEFAULT (_UART_RXDOUBLEXP_PERRP0_DEFAULT << 14) /**< Shifted mode DEFAULT for UART_RXDOUBLEXP */
#define UART_RXDOUBLEXP_FERRP0 (0x1UL << 15) /**< Data Framing Error 0 Peek */
#define _UART_RXDOUBLEXP_FERRP0_SHIFT 15 /**< Shift value for USART_FERRP0 */
#define _UART_RXDOUBLEXP_FERRP0_MASK 0x8000UL /**< Bit mask for USART_FERRP0 */
#define _UART_RXDOUBLEXP_FERRP0_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDOUBLEXP */
#define UART_RXDOUBLEXP_FERRP0_DEFAULT (_UART_RXDOUBLEXP_FERRP0_DEFAULT << 15) /**< Shifted mode DEFAULT for UART_RXDOUBLEXP */
#define _UART_RXDOUBLEXP_RXDATAP1_SHIFT 16 /**< Shift value for USART_RXDATAP1 */
#define _UART_RXDOUBLEXP_RXDATAP1_MASK 0x1FF0000UL /**< Bit mask for USART_RXDATAP1 */
#define _UART_RXDOUBLEXP_RXDATAP1_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDOUBLEXP */
#define UART_RXDOUBLEXP_RXDATAP1_DEFAULT (_UART_RXDOUBLEXP_RXDATAP1_DEFAULT << 16) /**< Shifted mode DEFAULT for UART_RXDOUBLEXP */
#define UART_RXDOUBLEXP_PERRP1 (0x1UL << 30) /**< Data Parity Error 1 Peek */
#define _UART_RXDOUBLEXP_PERRP1_SHIFT 30 /**< Shift value for USART_PERRP1 */
#define _UART_RXDOUBLEXP_PERRP1_MASK 0x40000000UL /**< Bit mask for USART_PERRP1 */
#define _UART_RXDOUBLEXP_PERRP1_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDOUBLEXP */
#define UART_RXDOUBLEXP_PERRP1_DEFAULT (_UART_RXDOUBLEXP_PERRP1_DEFAULT << 30) /**< Shifted mode DEFAULT for UART_RXDOUBLEXP */
#define UART_RXDOUBLEXP_FERRP1 (0x1UL << 31) /**< Data Framing Error 1 Peek */
#define _UART_RXDOUBLEXP_FERRP1_SHIFT 31 /**< Shift value for USART_FERRP1 */
#define _UART_RXDOUBLEXP_FERRP1_MASK 0x80000000UL /**< Bit mask for USART_FERRP1 */
#define _UART_RXDOUBLEXP_FERRP1_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_RXDOUBLEXP */
#define UART_RXDOUBLEXP_FERRP1_DEFAULT (_UART_RXDOUBLEXP_FERRP1_DEFAULT << 31) /**< Shifted mode DEFAULT for UART_RXDOUBLEXP */
/* Bit fields for UART TXDATAX */
#define _UART_TXDATAX_RESETVALUE 0x00000000UL /**< Default value for UART_TXDATAX */
#define _UART_TXDATAX_MASK 0x0000F9FFUL /**< Mask for UART_TXDATAX */
#define _UART_TXDATAX_TXDATAX_SHIFT 0 /**< Shift value for USART_TXDATAX */
#define _UART_TXDATAX_TXDATAX_MASK 0x1FFUL /**< Bit mask for USART_TXDATAX */
#define _UART_TXDATAX_TXDATAX_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDATAX */
#define UART_TXDATAX_TXDATAX_DEFAULT (_UART_TXDATAX_TXDATAX_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_TXDATAX */
#define UART_TXDATAX_UBRXAT (0x1UL << 11) /**< Unblock RX After Transmission */
#define _UART_TXDATAX_UBRXAT_SHIFT 11 /**< Shift value for USART_UBRXAT */
#define _UART_TXDATAX_UBRXAT_MASK 0x800UL /**< Bit mask for USART_UBRXAT */
#define _UART_TXDATAX_UBRXAT_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDATAX */
#define UART_TXDATAX_UBRXAT_DEFAULT (_UART_TXDATAX_UBRXAT_DEFAULT << 11) /**< Shifted mode DEFAULT for UART_TXDATAX */
#define UART_TXDATAX_TXTRIAT (0x1UL << 12) /**< Set TXTRI After Transmission */
#define _UART_TXDATAX_TXTRIAT_SHIFT 12 /**< Shift value for USART_TXTRIAT */
#define _UART_TXDATAX_TXTRIAT_MASK 0x1000UL /**< Bit mask for USART_TXTRIAT */
#define _UART_TXDATAX_TXTRIAT_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDATAX */
#define UART_TXDATAX_TXTRIAT_DEFAULT (_UART_TXDATAX_TXTRIAT_DEFAULT << 12) /**< Shifted mode DEFAULT for UART_TXDATAX */
#define UART_TXDATAX_TXBREAK (0x1UL << 13) /**< Transmit Data As Break */
#define _UART_TXDATAX_TXBREAK_SHIFT 13 /**< Shift value for USART_TXBREAK */
#define _UART_TXDATAX_TXBREAK_MASK 0x2000UL /**< Bit mask for USART_TXBREAK */
#define _UART_TXDATAX_TXBREAK_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDATAX */
#define UART_TXDATAX_TXBREAK_DEFAULT (_UART_TXDATAX_TXBREAK_DEFAULT << 13) /**< Shifted mode DEFAULT for UART_TXDATAX */
#define UART_TXDATAX_TXDISAT (0x1UL << 14) /**< Clear TXEN After Transmission */
#define _UART_TXDATAX_TXDISAT_SHIFT 14 /**< Shift value for USART_TXDISAT */
#define _UART_TXDATAX_TXDISAT_MASK 0x4000UL /**< Bit mask for USART_TXDISAT */
#define _UART_TXDATAX_TXDISAT_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDATAX */
#define UART_TXDATAX_TXDISAT_DEFAULT (_UART_TXDATAX_TXDISAT_DEFAULT << 14) /**< Shifted mode DEFAULT for UART_TXDATAX */
#define UART_TXDATAX_RXENAT (0x1UL << 15) /**< Enable RX After Transmission */
#define _UART_TXDATAX_RXENAT_SHIFT 15 /**< Shift value for USART_RXENAT */
#define _UART_TXDATAX_RXENAT_MASK 0x8000UL /**< Bit mask for USART_RXENAT */
#define _UART_TXDATAX_RXENAT_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDATAX */
#define UART_TXDATAX_RXENAT_DEFAULT (_UART_TXDATAX_RXENAT_DEFAULT << 15) /**< Shifted mode DEFAULT for UART_TXDATAX */
/* Bit fields for UART TXDATA */
#define _UART_TXDATA_RESETVALUE 0x00000000UL /**< Default value for UART_TXDATA */
#define _UART_TXDATA_MASK 0x000000FFUL /**< Mask for UART_TXDATA */
#define _UART_TXDATA_TXDATA_SHIFT 0 /**< Shift value for USART_TXDATA */
#define _UART_TXDATA_TXDATA_MASK 0xFFUL /**< Bit mask for USART_TXDATA */
#define _UART_TXDATA_TXDATA_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDATA */
#define UART_TXDATA_TXDATA_DEFAULT (_UART_TXDATA_TXDATA_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_TXDATA */
/* Bit fields for UART TXDOUBLEX */
#define _UART_TXDOUBLEX_RESETVALUE 0x00000000UL /**< Default value for UART_TXDOUBLEX */
#define _UART_TXDOUBLEX_MASK 0xF9FFF9FFUL /**< Mask for UART_TXDOUBLEX */
#define _UART_TXDOUBLEX_TXDATA0_SHIFT 0 /**< Shift value for USART_TXDATA0 */
#define _UART_TXDOUBLEX_TXDATA0_MASK 0x1FFUL /**< Bit mask for USART_TXDATA0 */
#define _UART_TXDOUBLEX_TXDATA0_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_TXDATA0_DEFAULT (_UART_TXDOUBLEX_TXDATA0_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_UBRXAT0 (0x1UL << 11) /**< Unblock RX After Transmission */
#define _UART_TXDOUBLEX_UBRXAT0_SHIFT 11 /**< Shift value for USART_UBRXAT0 */
#define _UART_TXDOUBLEX_UBRXAT0_MASK 0x800UL /**< Bit mask for USART_UBRXAT0 */
#define _UART_TXDOUBLEX_UBRXAT0_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_UBRXAT0_DEFAULT (_UART_TXDOUBLEX_UBRXAT0_DEFAULT << 11) /**< Shifted mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_TXTRIAT0 (0x1UL << 12) /**< Set TXTRI After Transmission */
#define _UART_TXDOUBLEX_TXTRIAT0_SHIFT 12 /**< Shift value for USART_TXTRIAT0 */
#define _UART_TXDOUBLEX_TXTRIAT0_MASK 0x1000UL /**< Bit mask for USART_TXTRIAT0 */
#define _UART_TXDOUBLEX_TXTRIAT0_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_TXTRIAT0_DEFAULT (_UART_TXDOUBLEX_TXTRIAT0_DEFAULT << 12) /**< Shifted mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_TXBREAK0 (0x1UL << 13) /**< Transmit Data As Break */
#define _UART_TXDOUBLEX_TXBREAK0_SHIFT 13 /**< Shift value for USART_TXBREAK0 */
#define _UART_TXDOUBLEX_TXBREAK0_MASK 0x2000UL /**< Bit mask for USART_TXBREAK0 */
#define _UART_TXDOUBLEX_TXBREAK0_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_TXBREAK0_DEFAULT (_UART_TXDOUBLEX_TXBREAK0_DEFAULT << 13) /**< Shifted mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_TXDISAT0 (0x1UL << 14) /**< Clear TXEN After Transmission */
#define _UART_TXDOUBLEX_TXDISAT0_SHIFT 14 /**< Shift value for USART_TXDISAT0 */
#define _UART_TXDOUBLEX_TXDISAT0_MASK 0x4000UL /**< Bit mask for USART_TXDISAT0 */
#define _UART_TXDOUBLEX_TXDISAT0_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_TXDISAT0_DEFAULT (_UART_TXDOUBLEX_TXDISAT0_DEFAULT << 14) /**< Shifted mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_RXENAT0 (0x1UL << 15) /**< Enable RX After Transmission */
#define _UART_TXDOUBLEX_RXENAT0_SHIFT 15 /**< Shift value for USART_RXENAT0 */
#define _UART_TXDOUBLEX_RXENAT0_MASK 0x8000UL /**< Bit mask for USART_RXENAT0 */
#define _UART_TXDOUBLEX_RXENAT0_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_RXENAT0_DEFAULT (_UART_TXDOUBLEX_RXENAT0_DEFAULT << 15) /**< Shifted mode DEFAULT for UART_TXDOUBLEX */
#define _UART_TXDOUBLEX_TXDATA1_SHIFT 16 /**< Shift value for USART_TXDATA1 */
#define _UART_TXDOUBLEX_TXDATA1_MASK 0x1FF0000UL /**< Bit mask for USART_TXDATA1 */
#define _UART_TXDOUBLEX_TXDATA1_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_TXDATA1_DEFAULT (_UART_TXDOUBLEX_TXDATA1_DEFAULT << 16) /**< Shifted mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_UBRXAT1 (0x1UL << 27) /**< Unblock RX After Transmission */
#define _UART_TXDOUBLEX_UBRXAT1_SHIFT 27 /**< Shift value for USART_UBRXAT1 */
#define _UART_TXDOUBLEX_UBRXAT1_MASK 0x8000000UL /**< Bit mask for USART_UBRXAT1 */
#define _UART_TXDOUBLEX_UBRXAT1_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_UBRXAT1_DEFAULT (_UART_TXDOUBLEX_UBRXAT1_DEFAULT << 27) /**< Shifted mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_TXTRIAT1 (0x1UL << 28) /**< Set TXTRI After Transmission */
#define _UART_TXDOUBLEX_TXTRIAT1_SHIFT 28 /**< Shift value for USART_TXTRIAT1 */
#define _UART_TXDOUBLEX_TXTRIAT1_MASK 0x10000000UL /**< Bit mask for USART_TXTRIAT1 */
#define _UART_TXDOUBLEX_TXTRIAT1_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_TXTRIAT1_DEFAULT (_UART_TXDOUBLEX_TXTRIAT1_DEFAULT << 28) /**< Shifted mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_TXBREAK1 (0x1UL << 29) /**< Transmit Data As Break */
#define _UART_TXDOUBLEX_TXBREAK1_SHIFT 29 /**< Shift value for USART_TXBREAK1 */
#define _UART_TXDOUBLEX_TXBREAK1_MASK 0x20000000UL /**< Bit mask for USART_TXBREAK1 */
#define _UART_TXDOUBLEX_TXBREAK1_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_TXBREAK1_DEFAULT (_UART_TXDOUBLEX_TXBREAK1_DEFAULT << 29) /**< Shifted mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_TXDISAT1 (0x1UL << 30) /**< Clear TXEN After Transmission */
#define _UART_TXDOUBLEX_TXDISAT1_SHIFT 30 /**< Shift value for USART_TXDISAT1 */
#define _UART_TXDOUBLEX_TXDISAT1_MASK 0x40000000UL /**< Bit mask for USART_TXDISAT1 */
#define _UART_TXDOUBLEX_TXDISAT1_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_TXDISAT1_DEFAULT (_UART_TXDOUBLEX_TXDISAT1_DEFAULT << 30) /**< Shifted mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_RXENAT1 (0x1UL << 31) /**< Enable RX After Transmission */
#define _UART_TXDOUBLEX_RXENAT1_SHIFT 31 /**< Shift value for USART_RXENAT1 */
#define _UART_TXDOUBLEX_RXENAT1_MASK 0x80000000UL /**< Bit mask for USART_RXENAT1 */
#define _UART_TXDOUBLEX_RXENAT1_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDOUBLEX */
#define UART_TXDOUBLEX_RXENAT1_DEFAULT (_UART_TXDOUBLEX_RXENAT1_DEFAULT << 31) /**< Shifted mode DEFAULT for UART_TXDOUBLEX */
/* Bit fields for UART TXDOUBLE */
#define _UART_TXDOUBLE_RESETVALUE 0x00000000UL /**< Default value for UART_TXDOUBLE */
#define _UART_TXDOUBLE_MASK 0x0000FFFFUL /**< Mask for UART_TXDOUBLE */
#define _UART_TXDOUBLE_TXDATA0_SHIFT 0 /**< Shift value for USART_TXDATA0 */
#define _UART_TXDOUBLE_TXDATA0_MASK 0xFFUL /**< Bit mask for USART_TXDATA0 */
#define _UART_TXDOUBLE_TXDATA0_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDOUBLE */
#define UART_TXDOUBLE_TXDATA0_DEFAULT (_UART_TXDOUBLE_TXDATA0_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_TXDOUBLE */
#define _UART_TXDOUBLE_TXDATA1_SHIFT 8 /**< Shift value for USART_TXDATA1 */
#define _UART_TXDOUBLE_TXDATA1_MASK 0xFF00UL /**< Bit mask for USART_TXDATA1 */
#define _UART_TXDOUBLE_TXDATA1_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_TXDOUBLE */
#define UART_TXDOUBLE_TXDATA1_DEFAULT (_UART_TXDOUBLE_TXDATA1_DEFAULT << 8) /**< Shifted mode DEFAULT for UART_TXDOUBLE */
/* Bit fields for UART IF */
#define _UART_IF_RESETVALUE 0x00000002UL /**< Default value for UART_IF */
#define _UART_IF_MASK 0x00001FFFUL /**< Mask for UART_IF */
#define UART_IF_TXC (0x1UL << 0) /**< TX Complete Interrupt Flag */
#define _UART_IF_TXC_SHIFT 0 /**< Shift value for USART_TXC */
#define _UART_IF_TXC_MASK 0x1UL /**< Bit mask for USART_TXC */
#define _UART_IF_TXC_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IF */
#define UART_IF_TXC_DEFAULT (_UART_IF_TXC_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_IF */
#define UART_IF_TXBL (0x1UL << 1) /**< TX Buffer Level Interrupt Flag */
#define _UART_IF_TXBL_SHIFT 1 /**< Shift value for USART_TXBL */
#define _UART_IF_TXBL_MASK 0x2UL /**< Bit mask for USART_TXBL */
#define _UART_IF_TXBL_DEFAULT 0x00000001UL /**< Mode DEFAULT for UART_IF */
#define UART_IF_TXBL_DEFAULT (_UART_IF_TXBL_DEFAULT << 1) /**< Shifted mode DEFAULT for UART_IF */
#define UART_IF_RXDATAV (0x1UL << 2) /**< RX Data Valid Interrupt Flag */
#define _UART_IF_RXDATAV_SHIFT 2 /**< Shift value for USART_RXDATAV */
#define _UART_IF_RXDATAV_MASK 0x4UL /**< Bit mask for USART_RXDATAV */
#define _UART_IF_RXDATAV_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IF */
#define UART_IF_RXDATAV_DEFAULT (_UART_IF_RXDATAV_DEFAULT << 2) /**< Shifted mode DEFAULT for UART_IF */
#define UART_IF_RXFULL (0x1UL << 3) /**< RX Buffer Full Interrupt Flag */
#define _UART_IF_RXFULL_SHIFT 3 /**< Shift value for USART_RXFULL */
#define _UART_IF_RXFULL_MASK 0x8UL /**< Bit mask for USART_RXFULL */
#define _UART_IF_RXFULL_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IF */
#define UART_IF_RXFULL_DEFAULT (_UART_IF_RXFULL_DEFAULT << 3) /**< Shifted mode DEFAULT for UART_IF */
#define UART_IF_RXOF (0x1UL << 4) /**< RX Overflow Interrupt Flag */
#define _UART_IF_RXOF_SHIFT 4 /**< Shift value for USART_RXOF */
#define _UART_IF_RXOF_MASK 0x10UL /**< Bit mask for USART_RXOF */
#define _UART_IF_RXOF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IF */
#define UART_IF_RXOF_DEFAULT (_UART_IF_RXOF_DEFAULT << 4) /**< Shifted mode DEFAULT for UART_IF */
#define UART_IF_RXUF (0x1UL << 5) /**< RX Underflow Interrupt Flag */
#define _UART_IF_RXUF_SHIFT 5 /**< Shift value for USART_RXUF */
#define _UART_IF_RXUF_MASK 0x20UL /**< Bit mask for USART_RXUF */
#define _UART_IF_RXUF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IF */
#define UART_IF_RXUF_DEFAULT (_UART_IF_RXUF_DEFAULT << 5) /**< Shifted mode DEFAULT for UART_IF */
#define UART_IF_TXOF (0x1UL << 6) /**< TX Overflow Interrupt Flag */
#define _UART_IF_TXOF_SHIFT 6 /**< Shift value for USART_TXOF */
#define _UART_IF_TXOF_MASK 0x40UL /**< Bit mask for USART_TXOF */
#define _UART_IF_TXOF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IF */
#define UART_IF_TXOF_DEFAULT (_UART_IF_TXOF_DEFAULT << 6) /**< Shifted mode DEFAULT for UART_IF */
#define UART_IF_TXUF (0x1UL << 7) /**< TX Underflow Interrupt Flag */
#define _UART_IF_TXUF_SHIFT 7 /**< Shift value for USART_TXUF */
#define _UART_IF_TXUF_MASK 0x80UL /**< Bit mask for USART_TXUF */
#define _UART_IF_TXUF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IF */
#define UART_IF_TXUF_DEFAULT (_UART_IF_TXUF_DEFAULT << 7) /**< Shifted mode DEFAULT for UART_IF */
#define UART_IF_PERR (0x1UL << 8) /**< Parity Error Interrupt Flag */
#define _UART_IF_PERR_SHIFT 8 /**< Shift value for USART_PERR */
#define _UART_IF_PERR_MASK 0x100UL /**< Bit mask for USART_PERR */
#define _UART_IF_PERR_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IF */
#define UART_IF_PERR_DEFAULT (_UART_IF_PERR_DEFAULT << 8) /**< Shifted mode DEFAULT for UART_IF */
#define UART_IF_FERR (0x1UL << 9) /**< Framing Error Interrupt Flag */
#define _UART_IF_FERR_SHIFT 9 /**< Shift value for USART_FERR */
#define _UART_IF_FERR_MASK 0x200UL /**< Bit mask for USART_FERR */
#define _UART_IF_FERR_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IF */
#define UART_IF_FERR_DEFAULT (_UART_IF_FERR_DEFAULT << 9) /**< Shifted mode DEFAULT for UART_IF */
#define UART_IF_MPAF (0x1UL << 10) /**< Multi-Processor Address Frame Interrupt Flag */
#define _UART_IF_MPAF_SHIFT 10 /**< Shift value for USART_MPAF */
#define _UART_IF_MPAF_MASK 0x400UL /**< Bit mask for USART_MPAF */
#define _UART_IF_MPAF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IF */
#define UART_IF_MPAF_DEFAULT (_UART_IF_MPAF_DEFAULT << 10) /**< Shifted mode DEFAULT for UART_IF */
#define UART_IF_SSM (0x1UL << 11) /**< Slave-Select In Master Mode Interrupt Flag */
#define _UART_IF_SSM_SHIFT 11 /**< Shift value for USART_SSM */
#define _UART_IF_SSM_MASK 0x800UL /**< Bit mask for USART_SSM */
#define _UART_IF_SSM_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IF */
#define UART_IF_SSM_DEFAULT (_UART_IF_SSM_DEFAULT << 11) /**< Shifted mode DEFAULT for UART_IF */
#define UART_IF_CCF (0x1UL << 12) /**< Collision Check Fail Interrupt Flag */
#define _UART_IF_CCF_SHIFT 12 /**< Shift value for USART_CCF */
#define _UART_IF_CCF_MASK 0x1000UL /**< Bit mask for USART_CCF */
#define _UART_IF_CCF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IF */
#define UART_IF_CCF_DEFAULT (_UART_IF_CCF_DEFAULT << 12) /**< Shifted mode DEFAULT for UART_IF */
/* Bit fields for UART IFS */
#define _UART_IFS_RESETVALUE 0x00000000UL /**< Default value for UART_IFS */
#define _UART_IFS_MASK 0x00001FF9UL /**< Mask for UART_IFS */
#define UART_IFS_TXC (0x1UL << 0) /**< Set TX Complete Interrupt Flag */
#define _UART_IFS_TXC_SHIFT 0 /**< Shift value for USART_TXC */
#define _UART_IFS_TXC_MASK 0x1UL /**< Bit mask for USART_TXC */
#define _UART_IFS_TXC_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFS */
#define UART_IFS_TXC_DEFAULT (_UART_IFS_TXC_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_IFS */
#define UART_IFS_RXFULL (0x1UL << 3) /**< Set RX Buffer Full Interrupt Flag */
#define _UART_IFS_RXFULL_SHIFT 3 /**< Shift value for USART_RXFULL */
#define _UART_IFS_RXFULL_MASK 0x8UL /**< Bit mask for USART_RXFULL */
#define _UART_IFS_RXFULL_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFS */
#define UART_IFS_RXFULL_DEFAULT (_UART_IFS_RXFULL_DEFAULT << 3) /**< Shifted mode DEFAULT for UART_IFS */
#define UART_IFS_RXOF (0x1UL << 4) /**< Set RX Overflow Interrupt Flag */
#define _UART_IFS_RXOF_SHIFT 4 /**< Shift value for USART_RXOF */
#define _UART_IFS_RXOF_MASK 0x10UL /**< Bit mask for USART_RXOF */
#define _UART_IFS_RXOF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFS */
#define UART_IFS_RXOF_DEFAULT (_UART_IFS_RXOF_DEFAULT << 4) /**< Shifted mode DEFAULT for UART_IFS */
#define UART_IFS_RXUF (0x1UL << 5) /**< Set RX Underflow Interrupt Flag */
#define _UART_IFS_RXUF_SHIFT 5 /**< Shift value for USART_RXUF */
#define _UART_IFS_RXUF_MASK 0x20UL /**< Bit mask for USART_RXUF */
#define _UART_IFS_RXUF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFS */
#define UART_IFS_RXUF_DEFAULT (_UART_IFS_RXUF_DEFAULT << 5) /**< Shifted mode DEFAULT for UART_IFS */
#define UART_IFS_TXOF (0x1UL << 6) /**< Set TX Overflow Interrupt Flag */
#define _UART_IFS_TXOF_SHIFT 6 /**< Shift value for USART_TXOF */
#define _UART_IFS_TXOF_MASK 0x40UL /**< Bit mask for USART_TXOF */
#define _UART_IFS_TXOF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFS */
#define UART_IFS_TXOF_DEFAULT (_UART_IFS_TXOF_DEFAULT << 6) /**< Shifted mode DEFAULT for UART_IFS */
#define UART_IFS_TXUF (0x1UL << 7) /**< Set TX Underflow Interrupt Flag */
#define _UART_IFS_TXUF_SHIFT 7 /**< Shift value for USART_TXUF */
#define _UART_IFS_TXUF_MASK 0x80UL /**< Bit mask for USART_TXUF */
#define _UART_IFS_TXUF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFS */
#define UART_IFS_TXUF_DEFAULT (_UART_IFS_TXUF_DEFAULT << 7) /**< Shifted mode DEFAULT for UART_IFS */
#define UART_IFS_PERR (0x1UL << 8) /**< Set Parity Error Interrupt Flag */
#define _UART_IFS_PERR_SHIFT 8 /**< Shift value for USART_PERR */
#define _UART_IFS_PERR_MASK 0x100UL /**< Bit mask for USART_PERR */
#define _UART_IFS_PERR_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFS */
#define UART_IFS_PERR_DEFAULT (_UART_IFS_PERR_DEFAULT << 8) /**< Shifted mode DEFAULT for UART_IFS */
#define UART_IFS_FERR (0x1UL << 9) /**< Set Framing Error Interrupt Flag */
#define _UART_IFS_FERR_SHIFT 9 /**< Shift value for USART_FERR */
#define _UART_IFS_FERR_MASK 0x200UL /**< Bit mask for USART_FERR */
#define _UART_IFS_FERR_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFS */
#define UART_IFS_FERR_DEFAULT (_UART_IFS_FERR_DEFAULT << 9) /**< Shifted mode DEFAULT for UART_IFS */
#define UART_IFS_MPAF (0x1UL << 10) /**< Set Multi-Processor Address Frame Interrupt Flag */
#define _UART_IFS_MPAF_SHIFT 10 /**< Shift value for USART_MPAF */
#define _UART_IFS_MPAF_MASK 0x400UL /**< Bit mask for USART_MPAF */
#define _UART_IFS_MPAF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFS */
#define UART_IFS_MPAF_DEFAULT (_UART_IFS_MPAF_DEFAULT << 10) /**< Shifted mode DEFAULT for UART_IFS */
#define UART_IFS_SSM (0x1UL << 11) /**< Set Slave-Select in Master mode Interrupt Flag */
#define _UART_IFS_SSM_SHIFT 11 /**< Shift value for USART_SSM */
#define _UART_IFS_SSM_MASK 0x800UL /**< Bit mask for USART_SSM */
#define _UART_IFS_SSM_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFS */
#define UART_IFS_SSM_DEFAULT (_UART_IFS_SSM_DEFAULT << 11) /**< Shifted mode DEFAULT for UART_IFS */
#define UART_IFS_CCF (0x1UL << 12) /**< Set Collision Check Fail Interrupt Flag */
#define _UART_IFS_CCF_SHIFT 12 /**< Shift value for USART_CCF */
#define _UART_IFS_CCF_MASK 0x1000UL /**< Bit mask for USART_CCF */
#define _UART_IFS_CCF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFS */
#define UART_IFS_CCF_DEFAULT (_UART_IFS_CCF_DEFAULT << 12) /**< Shifted mode DEFAULT for UART_IFS */
/* Bit fields for UART IFC */
#define _UART_IFC_RESETVALUE 0x00000000UL /**< Default value for UART_IFC */
#define _UART_IFC_MASK 0x00001FF9UL /**< Mask for UART_IFC */
#define UART_IFC_TXC (0x1UL << 0) /**< Clear TX Complete Interrupt Flag */
#define _UART_IFC_TXC_SHIFT 0 /**< Shift value for USART_TXC */
#define _UART_IFC_TXC_MASK 0x1UL /**< Bit mask for USART_TXC */
#define _UART_IFC_TXC_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFC */
#define UART_IFC_TXC_DEFAULT (_UART_IFC_TXC_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_IFC */
#define UART_IFC_RXFULL (0x1UL << 3) /**< Clear RX Buffer Full Interrupt Flag */
#define _UART_IFC_RXFULL_SHIFT 3 /**< Shift value for USART_RXFULL */
#define _UART_IFC_RXFULL_MASK 0x8UL /**< Bit mask for USART_RXFULL */
#define _UART_IFC_RXFULL_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFC */
#define UART_IFC_RXFULL_DEFAULT (_UART_IFC_RXFULL_DEFAULT << 3) /**< Shifted mode DEFAULT for UART_IFC */
#define UART_IFC_RXOF (0x1UL << 4) /**< Clear RX Overflow Interrupt Flag */
#define _UART_IFC_RXOF_SHIFT 4 /**< Shift value for USART_RXOF */
#define _UART_IFC_RXOF_MASK 0x10UL /**< Bit mask for USART_RXOF */
#define _UART_IFC_RXOF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFC */
#define UART_IFC_RXOF_DEFAULT (_UART_IFC_RXOF_DEFAULT << 4) /**< Shifted mode DEFAULT for UART_IFC */
#define UART_IFC_RXUF (0x1UL << 5) /**< Clear RX Underflow Interrupt Flag */
#define _UART_IFC_RXUF_SHIFT 5 /**< Shift value for USART_RXUF */
#define _UART_IFC_RXUF_MASK 0x20UL /**< Bit mask for USART_RXUF */
#define _UART_IFC_RXUF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFC */
#define UART_IFC_RXUF_DEFAULT (_UART_IFC_RXUF_DEFAULT << 5) /**< Shifted mode DEFAULT for UART_IFC */
#define UART_IFC_TXOF (0x1UL << 6) /**< Clear TX Overflow Interrupt Flag */
#define _UART_IFC_TXOF_SHIFT 6 /**< Shift value for USART_TXOF */
#define _UART_IFC_TXOF_MASK 0x40UL /**< Bit mask for USART_TXOF */
#define _UART_IFC_TXOF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFC */
#define UART_IFC_TXOF_DEFAULT (_UART_IFC_TXOF_DEFAULT << 6) /**< Shifted mode DEFAULT for UART_IFC */
#define UART_IFC_TXUF (0x1UL << 7) /**< Clear TX Underflow Interrupt Flag */
#define _UART_IFC_TXUF_SHIFT 7 /**< Shift value for USART_TXUF */
#define _UART_IFC_TXUF_MASK 0x80UL /**< Bit mask for USART_TXUF */
#define _UART_IFC_TXUF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFC */
#define UART_IFC_TXUF_DEFAULT (_UART_IFC_TXUF_DEFAULT << 7) /**< Shifted mode DEFAULT for UART_IFC */
#define UART_IFC_PERR (0x1UL << 8) /**< Clear Parity Error Interrupt Flag */
#define _UART_IFC_PERR_SHIFT 8 /**< Shift value for USART_PERR */
#define _UART_IFC_PERR_MASK 0x100UL /**< Bit mask for USART_PERR */
#define _UART_IFC_PERR_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFC */
#define UART_IFC_PERR_DEFAULT (_UART_IFC_PERR_DEFAULT << 8) /**< Shifted mode DEFAULT for UART_IFC */
#define UART_IFC_FERR (0x1UL << 9) /**< Clear Framing Error Interrupt Flag */
#define _UART_IFC_FERR_SHIFT 9 /**< Shift value for USART_FERR */
#define _UART_IFC_FERR_MASK 0x200UL /**< Bit mask for USART_FERR */
#define _UART_IFC_FERR_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFC */
#define UART_IFC_FERR_DEFAULT (_UART_IFC_FERR_DEFAULT << 9) /**< Shifted mode DEFAULT for UART_IFC */
#define UART_IFC_MPAF (0x1UL << 10) /**< Clear Multi-Processor Address Frame Interrupt Flag */
#define _UART_IFC_MPAF_SHIFT 10 /**< Shift value for USART_MPAF */
#define _UART_IFC_MPAF_MASK 0x400UL /**< Bit mask for USART_MPAF */
#define _UART_IFC_MPAF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFC */
#define UART_IFC_MPAF_DEFAULT (_UART_IFC_MPAF_DEFAULT << 10) /**< Shifted mode DEFAULT for UART_IFC */
#define UART_IFC_SSM (0x1UL << 11) /**< Clear Slave-Select In Master Mode Interrupt Flag */
#define _UART_IFC_SSM_SHIFT 11 /**< Shift value for USART_SSM */
#define _UART_IFC_SSM_MASK 0x800UL /**< Bit mask for USART_SSM */
#define _UART_IFC_SSM_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFC */
#define UART_IFC_SSM_DEFAULT (_UART_IFC_SSM_DEFAULT << 11) /**< Shifted mode DEFAULT for UART_IFC */
#define UART_IFC_CCF (0x1UL << 12) /**< Clear Collision Check Fail Interrupt Flag */
#define _UART_IFC_CCF_SHIFT 12 /**< Shift value for USART_CCF */
#define _UART_IFC_CCF_MASK 0x1000UL /**< Bit mask for USART_CCF */
#define _UART_IFC_CCF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IFC */
#define UART_IFC_CCF_DEFAULT (_UART_IFC_CCF_DEFAULT << 12) /**< Shifted mode DEFAULT for UART_IFC */
/* Bit fields for UART IEN */
#define _UART_IEN_RESETVALUE 0x00000000UL /**< Default value for UART_IEN */
#define _UART_IEN_MASK 0x00001FFFUL /**< Mask for UART_IEN */
#define UART_IEN_TXC (0x1UL << 0) /**< TX Complete Interrupt Enable */
#define _UART_IEN_TXC_SHIFT 0 /**< Shift value for USART_TXC */
#define _UART_IEN_TXC_MASK 0x1UL /**< Bit mask for USART_TXC */
#define _UART_IEN_TXC_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IEN */
#define UART_IEN_TXC_DEFAULT (_UART_IEN_TXC_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_IEN */
#define UART_IEN_TXBL (0x1UL << 1) /**< TX Buffer Level Interrupt Enable */
#define _UART_IEN_TXBL_SHIFT 1 /**< Shift value for USART_TXBL */
#define _UART_IEN_TXBL_MASK 0x2UL /**< Bit mask for USART_TXBL */
#define _UART_IEN_TXBL_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IEN */
#define UART_IEN_TXBL_DEFAULT (_UART_IEN_TXBL_DEFAULT << 1) /**< Shifted mode DEFAULT for UART_IEN */
#define UART_IEN_RXDATAV (0x1UL << 2) /**< RX Data Valid Interrupt Enable */
#define _UART_IEN_RXDATAV_SHIFT 2 /**< Shift value for USART_RXDATAV */
#define _UART_IEN_RXDATAV_MASK 0x4UL /**< Bit mask for USART_RXDATAV */
#define _UART_IEN_RXDATAV_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IEN */
#define UART_IEN_RXDATAV_DEFAULT (_UART_IEN_RXDATAV_DEFAULT << 2) /**< Shifted mode DEFAULT for UART_IEN */
#define UART_IEN_RXFULL (0x1UL << 3) /**< RX Buffer Full Interrupt Enable */
#define _UART_IEN_RXFULL_SHIFT 3 /**< Shift value for USART_RXFULL */
#define _UART_IEN_RXFULL_MASK 0x8UL /**< Bit mask for USART_RXFULL */
#define _UART_IEN_RXFULL_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IEN */
#define UART_IEN_RXFULL_DEFAULT (_UART_IEN_RXFULL_DEFAULT << 3) /**< Shifted mode DEFAULT for UART_IEN */
#define UART_IEN_RXOF (0x1UL << 4) /**< RX Overflow Interrupt Enable */
#define _UART_IEN_RXOF_SHIFT 4 /**< Shift value for USART_RXOF */
#define _UART_IEN_RXOF_MASK 0x10UL /**< Bit mask for USART_RXOF */
#define _UART_IEN_RXOF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IEN */
#define UART_IEN_RXOF_DEFAULT (_UART_IEN_RXOF_DEFAULT << 4) /**< Shifted mode DEFAULT for UART_IEN */
#define UART_IEN_RXUF (0x1UL << 5) /**< RX Underflow Interrupt Enable */
#define _UART_IEN_RXUF_SHIFT 5 /**< Shift value for USART_RXUF */
#define _UART_IEN_RXUF_MASK 0x20UL /**< Bit mask for USART_RXUF */
#define _UART_IEN_RXUF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IEN */
#define UART_IEN_RXUF_DEFAULT (_UART_IEN_RXUF_DEFAULT << 5) /**< Shifted mode DEFAULT for UART_IEN */
#define UART_IEN_TXOF (0x1UL << 6) /**< TX Overflow Interrupt Enable */
#define _UART_IEN_TXOF_SHIFT 6 /**< Shift value for USART_TXOF */
#define _UART_IEN_TXOF_MASK 0x40UL /**< Bit mask for USART_TXOF */
#define _UART_IEN_TXOF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IEN */
#define UART_IEN_TXOF_DEFAULT (_UART_IEN_TXOF_DEFAULT << 6) /**< Shifted mode DEFAULT for UART_IEN */
#define UART_IEN_TXUF (0x1UL << 7) /**< TX Underflow Interrupt Enable */
#define _UART_IEN_TXUF_SHIFT 7 /**< Shift value for USART_TXUF */
#define _UART_IEN_TXUF_MASK 0x80UL /**< Bit mask for USART_TXUF */
#define _UART_IEN_TXUF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IEN */
#define UART_IEN_TXUF_DEFAULT (_UART_IEN_TXUF_DEFAULT << 7) /**< Shifted mode DEFAULT for UART_IEN */
#define UART_IEN_PERR (0x1UL << 8) /**< Parity Error Interrupt Enable */
#define _UART_IEN_PERR_SHIFT 8 /**< Shift value for USART_PERR */
#define _UART_IEN_PERR_MASK 0x100UL /**< Bit mask for USART_PERR */
#define _UART_IEN_PERR_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IEN */
#define UART_IEN_PERR_DEFAULT (_UART_IEN_PERR_DEFAULT << 8) /**< Shifted mode DEFAULT for UART_IEN */
#define UART_IEN_FERR (0x1UL << 9) /**< Framing Error Interrupt Enable */
#define _UART_IEN_FERR_SHIFT 9 /**< Shift value for USART_FERR */
#define _UART_IEN_FERR_MASK 0x200UL /**< Bit mask for USART_FERR */
#define _UART_IEN_FERR_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IEN */
#define UART_IEN_FERR_DEFAULT (_UART_IEN_FERR_DEFAULT << 9) /**< Shifted mode DEFAULT for UART_IEN */
#define UART_IEN_MPAF (0x1UL << 10) /**< Multi-Processor Address Frame Interrupt Enable */
#define _UART_IEN_MPAF_SHIFT 10 /**< Shift value for USART_MPAF */
#define _UART_IEN_MPAF_MASK 0x400UL /**< Bit mask for USART_MPAF */
#define _UART_IEN_MPAF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IEN */
#define UART_IEN_MPAF_DEFAULT (_UART_IEN_MPAF_DEFAULT << 10) /**< Shifted mode DEFAULT for UART_IEN */
#define UART_IEN_SSM (0x1UL << 11) /**< Slave-Select In Master Mode Interrupt Enable */
#define _UART_IEN_SSM_SHIFT 11 /**< Shift value for USART_SSM */
#define _UART_IEN_SSM_MASK 0x800UL /**< Bit mask for USART_SSM */
#define _UART_IEN_SSM_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IEN */
#define UART_IEN_SSM_DEFAULT (_UART_IEN_SSM_DEFAULT << 11) /**< Shifted mode DEFAULT for UART_IEN */
#define UART_IEN_CCF (0x1UL << 12) /**< Collision Check Fail Interrupt Enable */
#define _UART_IEN_CCF_SHIFT 12 /**< Shift value for USART_CCF */
#define _UART_IEN_CCF_MASK 0x1000UL /**< Bit mask for USART_CCF */
#define _UART_IEN_CCF_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IEN */
#define UART_IEN_CCF_DEFAULT (_UART_IEN_CCF_DEFAULT << 12) /**< Shifted mode DEFAULT for UART_IEN */
/* Bit fields for UART IRCTRL */
#define _UART_IRCTRL_RESETVALUE 0x00000000UL /**< Default value for UART_IRCTRL */
#define _UART_IRCTRL_MASK 0x000000FFUL /**< Mask for UART_IRCTRL */
#define UART_IRCTRL_IREN (0x1UL << 0) /**< Enable IrDA Module */
#define _UART_IRCTRL_IREN_SHIFT 0 /**< Shift value for USART_IREN */
#define _UART_IRCTRL_IREN_MASK 0x1UL /**< Bit mask for USART_IREN */
#define _UART_IRCTRL_IREN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IRCTRL */
#define UART_IRCTRL_IREN_DEFAULT (_UART_IRCTRL_IREN_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_IRCTRL */
#define _UART_IRCTRL_IRPW_SHIFT 1 /**< Shift value for USART_IRPW */
#define _UART_IRCTRL_IRPW_MASK 0x6UL /**< Bit mask for USART_IRPW */
#define _UART_IRCTRL_IRPW_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IRCTRL */
#define _UART_IRCTRL_IRPW_ONE 0x00000000UL /**< Mode ONE for UART_IRCTRL */
#define _UART_IRCTRL_IRPW_TWO 0x00000001UL /**< Mode TWO for UART_IRCTRL */
#define _UART_IRCTRL_IRPW_THREE 0x00000002UL /**< Mode THREE for UART_IRCTRL */
#define _UART_IRCTRL_IRPW_FOUR 0x00000003UL /**< Mode FOUR for UART_IRCTRL */
#define UART_IRCTRL_IRPW_DEFAULT (_UART_IRCTRL_IRPW_DEFAULT << 1) /**< Shifted mode DEFAULT for UART_IRCTRL */
#define UART_IRCTRL_IRPW_ONE (_UART_IRCTRL_IRPW_ONE << 1) /**< Shifted mode ONE for UART_IRCTRL */
#define UART_IRCTRL_IRPW_TWO (_UART_IRCTRL_IRPW_TWO << 1) /**< Shifted mode TWO for UART_IRCTRL */
#define UART_IRCTRL_IRPW_THREE (_UART_IRCTRL_IRPW_THREE << 1) /**< Shifted mode THREE for UART_IRCTRL */
#define UART_IRCTRL_IRPW_FOUR (_UART_IRCTRL_IRPW_FOUR << 1) /**< Shifted mode FOUR for UART_IRCTRL */
#define UART_IRCTRL_IRFILT (0x1UL << 3) /**< IrDA RX Filter */
#define _UART_IRCTRL_IRFILT_SHIFT 3 /**< Shift value for USART_IRFILT */
#define _UART_IRCTRL_IRFILT_MASK 0x8UL /**< Bit mask for USART_IRFILT */
#define _UART_IRCTRL_IRFILT_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IRCTRL */
#define UART_IRCTRL_IRFILT_DEFAULT (_UART_IRCTRL_IRFILT_DEFAULT << 3) /**< Shifted mode DEFAULT for UART_IRCTRL */
#define _UART_IRCTRL_IRPRSSEL_SHIFT 4 /**< Shift value for USART_IRPRSSEL */
#define _UART_IRCTRL_IRPRSSEL_MASK 0x70UL /**< Bit mask for USART_IRPRSSEL */
#define _UART_IRCTRL_IRPRSSEL_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IRCTRL */
#define _UART_IRCTRL_IRPRSSEL_PRSCH0 0x00000000UL /**< Mode PRSCH0 for UART_IRCTRL */
#define _UART_IRCTRL_IRPRSSEL_PRSCH1 0x00000001UL /**< Mode PRSCH1 for UART_IRCTRL */
#define _UART_IRCTRL_IRPRSSEL_PRSCH2 0x00000002UL /**< Mode PRSCH2 for UART_IRCTRL */
#define _UART_IRCTRL_IRPRSSEL_PRSCH3 0x00000003UL /**< Mode PRSCH3 for UART_IRCTRL */
#define _UART_IRCTRL_IRPRSSEL_PRSCH4 0x00000004UL /**< Mode PRSCH4 for UART_IRCTRL */
#define _UART_IRCTRL_IRPRSSEL_PRSCH5 0x00000005UL /**< Mode PRSCH5 for UART_IRCTRL */
#define _UART_IRCTRL_IRPRSSEL_PRSCH6 0x00000006UL /**< Mode PRSCH6 for UART_IRCTRL */
#define _UART_IRCTRL_IRPRSSEL_PRSCH7 0x00000007UL /**< Mode PRSCH7 for UART_IRCTRL */
#define UART_IRCTRL_IRPRSSEL_DEFAULT (_UART_IRCTRL_IRPRSSEL_DEFAULT << 4) /**< Shifted mode DEFAULT for UART_IRCTRL */
#define UART_IRCTRL_IRPRSSEL_PRSCH0 (_UART_IRCTRL_IRPRSSEL_PRSCH0 << 4) /**< Shifted mode PRSCH0 for UART_IRCTRL */
#define UART_IRCTRL_IRPRSSEL_PRSCH1 (_UART_IRCTRL_IRPRSSEL_PRSCH1 << 4) /**< Shifted mode PRSCH1 for UART_IRCTRL */
#define UART_IRCTRL_IRPRSSEL_PRSCH2 (_UART_IRCTRL_IRPRSSEL_PRSCH2 << 4) /**< Shifted mode PRSCH2 for UART_IRCTRL */
#define UART_IRCTRL_IRPRSSEL_PRSCH3 (_UART_IRCTRL_IRPRSSEL_PRSCH3 << 4) /**< Shifted mode PRSCH3 for UART_IRCTRL */
#define UART_IRCTRL_IRPRSSEL_PRSCH4 (_UART_IRCTRL_IRPRSSEL_PRSCH4 << 4) /**< Shifted mode PRSCH4 for UART_IRCTRL */
#define UART_IRCTRL_IRPRSSEL_PRSCH5 (_UART_IRCTRL_IRPRSSEL_PRSCH5 << 4) /**< Shifted mode PRSCH5 for UART_IRCTRL */
#define UART_IRCTRL_IRPRSSEL_PRSCH6 (_UART_IRCTRL_IRPRSSEL_PRSCH6 << 4) /**< Shifted mode PRSCH6 for UART_IRCTRL */
#define UART_IRCTRL_IRPRSSEL_PRSCH7 (_UART_IRCTRL_IRPRSSEL_PRSCH7 << 4) /**< Shifted mode PRSCH7 for UART_IRCTRL */
#define UART_IRCTRL_IRPRSEN (0x1UL << 7) /**< IrDA PRS Channel Enable */
#define _UART_IRCTRL_IRPRSEN_SHIFT 7 /**< Shift value for USART_IRPRSEN */
#define _UART_IRCTRL_IRPRSEN_MASK 0x80UL /**< Bit mask for USART_IRPRSEN */
#define _UART_IRCTRL_IRPRSEN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_IRCTRL */
#define UART_IRCTRL_IRPRSEN_DEFAULT (_UART_IRCTRL_IRPRSEN_DEFAULT << 7) /**< Shifted mode DEFAULT for UART_IRCTRL */
/* Bit fields for UART ROUTE */
#define _UART_ROUTE_RESETVALUE 0x00000000UL /**< Default value for UART_ROUTE */
#define _UART_ROUTE_MASK 0x0000070FUL /**< Mask for UART_ROUTE */
#define UART_ROUTE_RXPEN (0x1UL << 0) /**< RX Pin Enable */
#define _UART_ROUTE_RXPEN_SHIFT 0 /**< Shift value for USART_RXPEN */
#define _UART_ROUTE_RXPEN_MASK 0x1UL /**< Bit mask for USART_RXPEN */
#define _UART_ROUTE_RXPEN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_ROUTE */
#define UART_ROUTE_RXPEN_DEFAULT (_UART_ROUTE_RXPEN_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_ROUTE */
#define UART_ROUTE_TXPEN (0x1UL << 1) /**< TX Pin Enable */
#define _UART_ROUTE_TXPEN_SHIFT 1 /**< Shift value for USART_TXPEN */
#define _UART_ROUTE_TXPEN_MASK 0x2UL /**< Bit mask for USART_TXPEN */
#define _UART_ROUTE_TXPEN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_ROUTE */
#define UART_ROUTE_TXPEN_DEFAULT (_UART_ROUTE_TXPEN_DEFAULT << 1) /**< Shifted mode DEFAULT for UART_ROUTE */
#define UART_ROUTE_CSPEN (0x1UL << 2) /**< CS Pin Enable */
#define _UART_ROUTE_CSPEN_SHIFT 2 /**< Shift value for USART_CSPEN */
#define _UART_ROUTE_CSPEN_MASK 0x4UL /**< Bit mask for USART_CSPEN */
#define _UART_ROUTE_CSPEN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_ROUTE */
#define UART_ROUTE_CSPEN_DEFAULT (_UART_ROUTE_CSPEN_DEFAULT << 2) /**< Shifted mode DEFAULT for UART_ROUTE */
#define UART_ROUTE_CLKPEN (0x1UL << 3) /**< CLK Pin Enable */
#define _UART_ROUTE_CLKPEN_SHIFT 3 /**< Shift value for USART_CLKPEN */
#define _UART_ROUTE_CLKPEN_MASK 0x8UL /**< Bit mask for USART_CLKPEN */
#define _UART_ROUTE_CLKPEN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_ROUTE */
#define UART_ROUTE_CLKPEN_DEFAULT (_UART_ROUTE_CLKPEN_DEFAULT << 3) /**< Shifted mode DEFAULT for UART_ROUTE */
#define _UART_ROUTE_LOCATION_SHIFT 8 /**< Shift value for USART_LOCATION */
#define _UART_ROUTE_LOCATION_MASK 0x700UL /**< Bit mask for USART_LOCATION */
#define _UART_ROUTE_LOCATION_LOC0 0x00000000UL /**< Mode LOC0 for UART_ROUTE */
#define _UART_ROUTE_LOCATION_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_ROUTE */
#define _UART_ROUTE_LOCATION_LOC1 0x00000001UL /**< Mode LOC1 for UART_ROUTE */
#define _UART_ROUTE_LOCATION_LOC2 0x00000002UL /**< Mode LOC2 for UART_ROUTE */
#define _UART_ROUTE_LOCATION_LOC3 0x00000003UL /**< Mode LOC3 for UART_ROUTE */
#define _UART_ROUTE_LOCATION_LOC4 0x00000004UL /**< Mode LOC4 for UART_ROUTE */
#define _UART_ROUTE_LOCATION_LOC5 0x00000005UL /**< Mode LOC5 for UART_ROUTE */
#define UART_ROUTE_LOCATION_LOC0 (_UART_ROUTE_LOCATION_LOC0 << 8) /**< Shifted mode LOC0 for UART_ROUTE */
#define UART_ROUTE_LOCATION_DEFAULT (_UART_ROUTE_LOCATION_DEFAULT << 8) /**< Shifted mode DEFAULT for UART_ROUTE */
#define UART_ROUTE_LOCATION_LOC1 (_UART_ROUTE_LOCATION_LOC1 << 8) /**< Shifted mode LOC1 for UART_ROUTE */
#define UART_ROUTE_LOCATION_LOC2 (_UART_ROUTE_LOCATION_LOC2 << 8) /**< Shifted mode LOC2 for UART_ROUTE */
#define UART_ROUTE_LOCATION_LOC3 (_UART_ROUTE_LOCATION_LOC3 << 8) /**< Shifted mode LOC3 for UART_ROUTE */
#define UART_ROUTE_LOCATION_LOC4 (_UART_ROUTE_LOCATION_LOC4 << 8) /**< Shifted mode LOC4 for UART_ROUTE */
#define UART_ROUTE_LOCATION_LOC5 (_UART_ROUTE_LOCATION_LOC5 << 8) /**< Shifted mode LOC5 for UART_ROUTE */
/* Bit fields for UART INPUT */
#define _UART_INPUT_RESETVALUE 0x00000000UL /**< Default value for UART_INPUT */
#define _UART_INPUT_MASK 0x0000001FUL /**< Mask for UART_INPUT */
#define _UART_INPUT_RXPRSSEL_SHIFT 0 /**< Shift value for USART_RXPRSSEL */
#define _UART_INPUT_RXPRSSEL_MASK 0xFUL /**< Bit mask for USART_RXPRSSEL */
#define _UART_INPUT_RXPRSSEL_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_INPUT */
#define _UART_INPUT_RXPRSSEL_PRSCH0 0x00000000UL /**< Mode PRSCH0 for UART_INPUT */
#define _UART_INPUT_RXPRSSEL_PRSCH1 0x00000001UL /**< Mode PRSCH1 for UART_INPUT */
#define _UART_INPUT_RXPRSSEL_PRSCH2 0x00000002UL /**< Mode PRSCH2 for UART_INPUT */
#define _UART_INPUT_RXPRSSEL_PRSCH3 0x00000003UL /**< Mode PRSCH3 for UART_INPUT */
#define _UART_INPUT_RXPRSSEL_PRSCH4 0x00000004UL /**< Mode PRSCH4 for UART_INPUT */
#define _UART_INPUT_RXPRSSEL_PRSCH5 0x00000005UL /**< Mode PRSCH5 for UART_INPUT */
#define _UART_INPUT_RXPRSSEL_PRSCH6 0x00000006UL /**< Mode PRSCH6 for UART_INPUT */
#define _UART_INPUT_RXPRSSEL_PRSCH7 0x00000007UL /**< Mode PRSCH7 for UART_INPUT */
#define _UART_INPUT_RXPRSSEL_PRSCH8 0x00000008UL /**< Mode PRSCH8 for UART_INPUT */
#define _UART_INPUT_RXPRSSEL_PRSCH9 0x00000009UL /**< Mode PRSCH9 for UART_INPUT */
#define _UART_INPUT_RXPRSSEL_PRSCH10 0x0000000AUL /**< Mode PRSCH10 for UART_INPUT */
#define _UART_INPUT_RXPRSSEL_PRSCH11 0x0000000BUL /**< Mode PRSCH11 for UART_INPUT */
#define UART_INPUT_RXPRSSEL_DEFAULT (_UART_INPUT_RXPRSSEL_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_INPUT */
#define UART_INPUT_RXPRSSEL_PRSCH0 (_UART_INPUT_RXPRSSEL_PRSCH0 << 0) /**< Shifted mode PRSCH0 for UART_INPUT */
#define UART_INPUT_RXPRSSEL_PRSCH1 (_UART_INPUT_RXPRSSEL_PRSCH1 << 0) /**< Shifted mode PRSCH1 for UART_INPUT */
#define UART_INPUT_RXPRSSEL_PRSCH2 (_UART_INPUT_RXPRSSEL_PRSCH2 << 0) /**< Shifted mode PRSCH2 for UART_INPUT */
#define UART_INPUT_RXPRSSEL_PRSCH3 (_UART_INPUT_RXPRSSEL_PRSCH3 << 0) /**< Shifted mode PRSCH3 for UART_INPUT */
#define UART_INPUT_RXPRSSEL_PRSCH4 (_UART_INPUT_RXPRSSEL_PRSCH4 << 0) /**< Shifted mode PRSCH4 for UART_INPUT */
#define UART_INPUT_RXPRSSEL_PRSCH5 (_UART_INPUT_RXPRSSEL_PRSCH5 << 0) /**< Shifted mode PRSCH5 for UART_INPUT */
#define UART_INPUT_RXPRSSEL_PRSCH6 (_UART_INPUT_RXPRSSEL_PRSCH6 << 0) /**< Shifted mode PRSCH6 for UART_INPUT */
#define UART_INPUT_RXPRSSEL_PRSCH7 (_UART_INPUT_RXPRSSEL_PRSCH7 << 0) /**< Shifted mode PRSCH7 for UART_INPUT */
#define UART_INPUT_RXPRSSEL_PRSCH8 (_UART_INPUT_RXPRSSEL_PRSCH8 << 0) /**< Shifted mode PRSCH8 for UART_INPUT */
#define UART_INPUT_RXPRSSEL_PRSCH9 (_UART_INPUT_RXPRSSEL_PRSCH9 << 0) /**< Shifted mode PRSCH9 for UART_INPUT */
#define UART_INPUT_RXPRSSEL_PRSCH10 (_UART_INPUT_RXPRSSEL_PRSCH10 << 0) /**< Shifted mode PRSCH10 for UART_INPUT */
#define UART_INPUT_RXPRSSEL_PRSCH11 (_UART_INPUT_RXPRSSEL_PRSCH11 << 0) /**< Shifted mode PRSCH11 for UART_INPUT */
#define UART_INPUT_RXPRS (0x1UL << 4) /**< PRS RX Enable */
#define _UART_INPUT_RXPRS_SHIFT 4 /**< Shift value for USART_RXPRS */
#define _UART_INPUT_RXPRS_MASK 0x10UL /**< Bit mask for USART_RXPRS */
#define _UART_INPUT_RXPRS_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_INPUT */
#define UART_INPUT_RXPRS_DEFAULT (_UART_INPUT_RXPRS_DEFAULT << 4) /**< Shifted mode DEFAULT for UART_INPUT */
/* Bit fields for UART I2SCTRL */
#define _UART_I2SCTRL_RESETVALUE 0x00000000UL /**< Default value for UART_I2SCTRL */
#define _UART_I2SCTRL_MASK 0x0000071FUL /**< Mask for UART_I2SCTRL */
#define UART_I2SCTRL_EN (0x1UL << 0) /**< Enable I2S Mode */
#define _UART_I2SCTRL_EN_SHIFT 0 /**< Shift value for USART_EN */
#define _UART_I2SCTRL_EN_MASK 0x1UL /**< Bit mask for USART_EN */
#define _UART_I2SCTRL_EN_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_I2SCTRL */
#define UART_I2SCTRL_EN_DEFAULT (_UART_I2SCTRL_EN_DEFAULT << 0) /**< Shifted mode DEFAULT for UART_I2SCTRL */
#define UART_I2SCTRL_MONO (0x1UL << 1) /**< Stero or Mono */
#define _UART_I2SCTRL_MONO_SHIFT 1 /**< Shift value for USART_MONO */
#define _UART_I2SCTRL_MONO_MASK 0x2UL /**< Bit mask for USART_MONO */
#define _UART_I2SCTRL_MONO_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_I2SCTRL */
#define UART_I2SCTRL_MONO_DEFAULT (_UART_I2SCTRL_MONO_DEFAULT << 1) /**< Shifted mode DEFAULT for UART_I2SCTRL */
#define UART_I2SCTRL_JUSTIFY (0x1UL << 2) /**< Justification of I2S Data */
#define _UART_I2SCTRL_JUSTIFY_SHIFT 2 /**< Shift value for USART_JUSTIFY */
#define _UART_I2SCTRL_JUSTIFY_MASK 0x4UL /**< Bit mask for USART_JUSTIFY */
#define _UART_I2SCTRL_JUSTIFY_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_I2SCTRL */
#define _UART_I2SCTRL_JUSTIFY_LEFT 0x00000000UL /**< Mode LEFT for UART_I2SCTRL */
#define _UART_I2SCTRL_JUSTIFY_RIGHT 0x00000001UL /**< Mode RIGHT for UART_I2SCTRL */
#define UART_I2SCTRL_JUSTIFY_DEFAULT (_UART_I2SCTRL_JUSTIFY_DEFAULT << 2) /**< Shifted mode DEFAULT for UART_I2SCTRL */
#define UART_I2SCTRL_JUSTIFY_LEFT (_UART_I2SCTRL_JUSTIFY_LEFT << 2) /**< Shifted mode LEFT for UART_I2SCTRL */
#define UART_I2SCTRL_JUSTIFY_RIGHT (_UART_I2SCTRL_JUSTIFY_RIGHT << 2) /**< Shifted mode RIGHT for UART_I2SCTRL */
#define UART_I2SCTRL_DMASPLIT (0x1UL << 3) /**< Separate DMA Request For Left/Right Data */
#define _UART_I2SCTRL_DMASPLIT_SHIFT 3 /**< Shift value for USART_DMASPLIT */
#define _UART_I2SCTRL_DMASPLIT_MASK 0x8UL /**< Bit mask for USART_DMASPLIT */
#define _UART_I2SCTRL_DMASPLIT_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_I2SCTRL */
#define UART_I2SCTRL_DMASPLIT_DEFAULT (_UART_I2SCTRL_DMASPLIT_DEFAULT << 3) /**< Shifted mode DEFAULT for UART_I2SCTRL */
#define UART_I2SCTRL_DELAY (0x1UL << 4) /**< Delay on I2S data */
#define _UART_I2SCTRL_DELAY_SHIFT 4 /**< Shift value for USART_DELAY */
#define _UART_I2SCTRL_DELAY_MASK 0x10UL /**< Bit mask for USART_DELAY */
#define _UART_I2SCTRL_DELAY_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_I2SCTRL */
#define UART_I2SCTRL_DELAY_DEFAULT (_UART_I2SCTRL_DELAY_DEFAULT << 4) /**< Shifted mode DEFAULT for UART_I2SCTRL */
#define _UART_I2SCTRL_FORMAT_SHIFT 8 /**< Shift value for USART_FORMAT */
#define _UART_I2SCTRL_FORMAT_MASK 0x700UL /**< Bit mask for USART_FORMAT */
#define _UART_I2SCTRL_FORMAT_DEFAULT 0x00000000UL /**< Mode DEFAULT for UART_I2SCTRL */
#define _UART_I2SCTRL_FORMAT_W32D32 0x00000000UL /**< Mode W32D32 for UART_I2SCTRL */
#define _UART_I2SCTRL_FORMAT_W32D24M 0x00000001UL /**< Mode W32D24M for UART_I2SCTRL */
#define _UART_I2SCTRL_FORMAT_W32D24 0x00000002UL /**< Mode W32D24 for UART_I2SCTRL */
#define _UART_I2SCTRL_FORMAT_W32D16 0x00000003UL /**< Mode W32D16 for UART_I2SCTRL */
#define _UART_I2SCTRL_FORMAT_W32D8 0x00000004UL /**< Mode W32D8 for UART_I2SCTRL */
#define _UART_I2SCTRL_FORMAT_W16D16 0x00000005UL /**< Mode W16D16 for UART_I2SCTRL */
#define _UART_I2SCTRL_FORMAT_W16D8 0x00000006UL /**< Mode W16D8 for UART_I2SCTRL */
#define _UART_I2SCTRL_FORMAT_W8D8 0x00000007UL /**< Mode W8D8 for UART_I2SCTRL */
#define UART_I2SCTRL_FORMAT_DEFAULT (_UART_I2SCTRL_FORMAT_DEFAULT << 8) /**< Shifted mode DEFAULT for UART_I2SCTRL */
#define UART_I2SCTRL_FORMAT_W32D32 (_UART_I2SCTRL_FORMAT_W32D32 << 8) /**< Shifted mode W32D32 for UART_I2SCTRL */
#define UART_I2SCTRL_FORMAT_W32D24M (_UART_I2SCTRL_FORMAT_W32D24M << 8) /**< Shifted mode W32D24M for UART_I2SCTRL */
#define UART_I2SCTRL_FORMAT_W32D24 (_UART_I2SCTRL_FORMAT_W32D24 << 8) /**< Shifted mode W32D24 for UART_I2SCTRL */
#define UART_I2SCTRL_FORMAT_W32D16 (_UART_I2SCTRL_FORMAT_W32D16 << 8) /**< Shifted mode W32D16 for UART_I2SCTRL */
#define UART_I2SCTRL_FORMAT_W32D8 (_UART_I2SCTRL_FORMAT_W32D8 << 8) /**< Shifted mode W32D8 for UART_I2SCTRL */
#define UART_I2SCTRL_FORMAT_W16D16 (_UART_I2SCTRL_FORMAT_W16D16 << 8) /**< Shifted mode W16D16 for UART_I2SCTRL */
#define UART_I2SCTRL_FORMAT_W16D8 (_UART_I2SCTRL_FORMAT_W16D8 << 8) /**< Shifted mode W16D8 for UART_I2SCTRL */
#define UART_I2SCTRL_FORMAT_W8D8 (_UART_I2SCTRL_FORMAT_W8D8 << 8) /**< Shifted mode W8D8 for UART_I2SCTRL */
/** @} End of group EFM32LG_UART */