The official mbed C/C SDK provides the software platform and libraries to build your applications.

Fork of mbed by mbed official

Revision:
90:cb3d968589d8
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L152RE/stm32l1xx_hal_opamp_ex.h	Tue Oct 28 16:40:41 2014 +0000
@@ -0,0 +1,225 @@
+/**
+  ******************************************************************************
+  * @file    stm32l1xx_hal_opamp_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    5-September-2014
+  * @brief   Header file of OPAMP HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L1xx_HAL_OPAMP_EX_H
+#define __STM32L1xx_HAL_OPAMP_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) || defined (STM32L162xC) || defined (STM32L152xC) || defined (STM32L151xC)
+   
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l1xx_hal_def.h"
+
+/** @addtogroup STM32L1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup OPAMPEx
+  * @{
+  */
+
+
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants ---------------------------------------------------------*/
+/** @defgroup OPAMPEx_Exported_Constants OPAMPEx Exported Constants
+  * @{
+  */
+#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD)
+#define OPAMP_CSR_OPAXPD_ALL                                                   \
+  (OPAMP_CSR_OPA1PD | OPAMP_CSR_OPA2PD | OPAMP_CSR_OPA3PD)
+    
+#define OPAMP_CSR_OPAXCAL_L_ALL                                                \
+  (OPAMP_CSR_OPA1CAL_L | OPAMP_CSR_OPA2CAL_L | OPAMP_CSR_OPA3CAL_L)
+
+#define OPAMP_CSR_OPAXCAL_H_ALL                                                \
+  (OPAMP_CSR_OPA1CAL_H | OPAMP_CSR_OPA2CAL_H | OPAMP_CSR_OPA3CAL_H)
+    
+#define OPAMP_CSR_ALL_SWITCHES_ALL_OPAMPS                                      \
+  (OPAMP_CSR_S3SEL1 | OPAMP_CSR_S4SEL1 | OPAMP_CSR_S5SEL1 | OPAMP_CSR_S6SEL1 | \
+   OPAMP_CSR_ANAWSEL1                                                        | \
+   OPAMP_CSR_S3SEL2 | OPAMP_CSR_S4SEL2 | OPAMP_CSR_S5SEL2 | OPAMP_CSR_S6SEL2 | \
+   OPAMP_CSR_ANAWSEL2 | OPAMP_CSR_S7SEL2                                     | \
+   OPAMP_CSR_S3SEL3 | OPAMP_CSR_S4SEL3 | OPAMP_CSR_S5SEL3 | OPAMP_CSR_S6SEL3 | \
+   OPAMP_CSR_ANAWSEL3                                                         )
+#else
+#define OPAMP_CSR_OPAXPD_ALL                                                   \
+  (OPAMP_CSR_OPA1PD | OPAMP_CSR_OPA2PD)
+    
+#define OPAMP_CSR_OPAXCAL_L_ALL                                                \
+  (OPAMP_CSR_OPA1CAL_L | OPAMP_CSR_OPA2CAL_L)
+
+#define OPAMP_CSR_OPAXCAL_H_ALL                                                \
+  (OPAMP_CSR_OPA1CAL_H | OPAMP_CSR_OPA2CAL_H)
+    
+#define OPAMP_CSR_ALL_SWITCHES_ALL_OPAMPS                                      \
+  (OPAMP_CSR_S3SEL1 | OPAMP_CSR_S4SEL1 | OPAMP_CSR_S5SEL1 | OPAMP_CSR_S6SEL1 | \
+   OPAMP_CSR_ANAWSEL1                                                        | \
+   OPAMP_CSR_S3SEL2 | OPAMP_CSR_S4SEL2 | OPAMP_CSR_S5SEL2 | OPAMP_CSR_S6SEL2 | \
+   OPAMP_CSR_ANAWSEL2 | OPAMP_CSR_S7SEL2                                      )
+#endif /* STM32L151xD || STM32L152xD || STM32L162xD */
+
+/**
+  * @}
+  */
+  
+/* Exported macro ------------------------------------------------------------*/
+    
+/** @defgroup OPAMPEx_Exported_Macro OPAMPEx Exported Macro
+  * @{
+  */
+    
+#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD)
+/**
+  * @brief Enable internal analog switch SW1 to connect OPAMP3 ouput to ADC
+  * switch matrix (ADC channel VCOMP, channel 26) and COMP1 non-inverting input
+  * (OPAMP3 available on STM32L1 devices Cat.4 only).
+  * @retval None
+  */
+#define __HAL_OPAMP_OPAMP3OUT_CONNECT_ADC_COMP1()    __HAL_RI_SWITCH_COMP1_SW1_CLOSE()
+
+/**
+  * @brief Disable internal analog switch SW1 to disconnect OPAMP3 ouput from 
+  * ADC switch matrix (ADC channel VCOMP, channel 26) and COMP1 non-inverting
+  * input.
+  * @retval None
+  */
+#define __HAL_OPAMP_OPAMP3OUT_DISCONNECT_ADC_COMP1() __HAL_RI_SWITCH_COMP1_SW1_OPEN()
+#endif /* STM32L151xD || STM32L152xD || STM32L162xD */
+    
+/**
+  * @}
+  */
+      
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup OPAMPEx_Private_Macro OPAMPEx Private Macro
+  * @{
+  */
+   
+#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD)
+/**
+  * @brief Get the OPAMP instance in decimal number for further
+  * processing needs by HAL OPAMP driver functions.
+  * @param __HANDLE__: OPAMP handle
+  * @retval "0" for OPAMP1, "1" for OPAMP2, "2" for OPAMP3
+  */
+#define __OPAMP_INSTANCE_DECIMAL__(__HANDLE__)                                 \
+  ( ( ((__HANDLE__)->Instance == OPAMP1)                                       \
+    )?                                                                         \
+     ((uint32_t)0)                                                             \
+     :                                                                         \
+     ( ( ((__HANDLE__)->Instance == OPAMP2)                                    \
+       )?                                                                      \
+        ((uint32_t)1)                                                          \
+        :                                                                      \
+        ((uint32_t)2)                                                          \
+     )                                                                         \
+  )
+#else
+/**
+  * @brief Get the OPAMP instance in decimal number for further
+  * processing needs by HAL OPAMP driver functions.
+  * @param __HANDLE__: OPAMP handle
+  * @retval "0" for OPAMP1, "1" for OPAMP2
+  */
+#define __OPAMP_INSTANCE_DECIMAL__(__HANDLE__)                                 \
+  ( ( ((__HANDLE__)->Instance == OPAMP1)                                       \
+    )?                                                                         \
+     ((uint32_t)0)                                                             \
+     :                                                                         \
+     ((uint32_t)1)                                                             \
+  )
+#endif /* STM32L151xD || STM32L152xD || STM32L162xD */
+
+/**
+  * @}
+  */
+    
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup OPAMPEx_Exported_Functions
+  * @{
+  */
+
+/* I/O operation functions  *****************************************************/
+/** @defgroup OPAMPEx_Exported_Functions_Group1 Extended IO operation functions
+  * @{
+  */
+#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD)
+HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPAMP_HandleTypeDef *hopamp2, OPAMP_HandleTypeDef *hopamp3);
+#else
+HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPAMP_HandleTypeDef *hopamp2);
+#endif /* STM32L151xD || STM32L152xD || STM32L162xD */
+/**
+  * @}
+  */
+/* Peripheral Control functions  ************************************************/
+/** @addtogroup OPAMPEx_Exported_Functions_Group2
+  * @{
+  */
+HAL_StatusTypeDef HAL_OPAMPEx_Unlock(OPAMP_HandleTypeDef *hopamp); 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE || STM32L162xC || STM32L152xC || STM32L151xC */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32L1xx_HAL_OPAMP_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/