Egor Rumjantsev
The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F401RE/stm32f4xx_hal_dcmi.h
- Revision:
- 77:869cf507173a
- Child:
- 81:7d30d6019079
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dcmi.h Fri Feb 14 14:36:43 2014 +0000
@@ -0,0 +1,499 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dcmi.h
+ * @author MCD Application Team
+ * @version V1.0.0RC2
+ * @date 04-February-2014
+ * @brief Header file of DCMI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DCMI_H
+#define __STM32F4xx_HAL_DCMI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DCMI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief DCMI Error source
+ */
+typedef enum
+{
+ DCMI_ERROR_SYNC = 1, /*!< Synchronisation error */
+ DCMI_OVERRUN = 2, /*!< DCMI Overrun */
+
+}DCMI_ErrorTypeDef;
+
+/**
+ * @brief DCMI Embedded Synchronisation CODE Init structure definition
+ */
+typedef struct
+{
+ uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */
+ uint8_t LineStartCode; /*!< Specifies the code of the line start delimiter. */
+ uint8_t LineEndCode; /*!< Specifies the code of the line end delimiter. */
+ uint8_t FrameEndCode; /*!< Specifies the code of the frame end delimiter. */
+
+}DCMI_CodesInitTypeDef;
+
+/**
+ * @brief DCMI Init structure definition
+ */
+typedef struct
+{
+ uint32_t SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded.
+ This parameter can be a value of @ref DCMI_Synchronization_Mode */
+
+ uint32_t PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising.
+ This parameter can be a value of @ref DCMI_PIXCK_Polarity */
+
+ uint32_t VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low.
+ This parameter can be a value of @ref DCMI_VSYNC_Polarity */
+
+ uint32_t HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low.
+ This parameter can be a value of @ref DCMI_HSYNC_Polarity */
+
+ uint32_t CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.
+ This parameter can be a value of @ref DCMI_Capture_Rate */
+
+ uint32_t ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.
+ This parameter can be a value of @ref DCMI_Extended_Data_Mode */
+
+ DCMI_CodesInitTypeDef SyncroCode; /*!< Specifies the code of the frame start delimiter. */
+
+ uint32_t JPEGMode; /*!< Enable or Disable the JPEG mode.
+ This parameter can be a value of @ref DCMI_MODE_JPEG */
+
+}DCMI_InitTypeDef;
+
+
+/**
+ * @brief HAL DCMI State structures definition
+ */
+typedef enum
+{
+ HAL_DCMI_STATE_RESET = 0x00, /*!< DCMI not yet initialized or disabled */
+ HAL_DCMI_STATE_READY = 0x01, /*!< DCMI initialized and ready for use */
+ HAL_DCMI_STATE_BUSY = 0x02, /*!< DCMI internal processing is ongoing */
+ HAL_DCMI_STATE_TIMEOUT = 0x03, /*!< DCMI timeout state */
+ HAL_DCMI_STATE_ERROR = 0x04 /*!< DCMI error state */
+
+}HAL_DCMI_StateTypeDef;
+
+/**
+ * @brief DCMI handle Structure definition
+ */
+typedef struct
+{
+ DCMI_TypeDef *Instance; /*!< DCMI Register base address */
+
+ DCMI_InitTypeDef Init; /*!< DCMI parameters */
+
+ HAL_LockTypeDef Lock; /*!< DCMI locking object */
+
+ __IO HAL_DCMI_StateTypeDef State; /*!< DCMI state */
+
+ __IO uint32_t XferCount; /*!< DMA transfer counter */
+
+ __IO uint32_t XferSize; /*!< DMA transfer size */
+
+ uint32_t XferTransferNumber; /*!< DMA transfer number */
+
+ uint32_t pBuffPtr; /*!< Pointer to DMA output buffer */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer to the DMA handler */
+
+ __IO uint32_t ErrorCode; /*!< DCMI Error code */
+
+}DCMI_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DCMI_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DCMI_Error_Code
+ * @{
+ */
+#define HAL_DCMI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DCMI_ERROR_OVF ((uint32_t)0x00000001) /*!< Overflow error */
+#define HAL_DCMI_ERROR_SYNC ((uint32_t)0x00000002) /*!< Synchronization error */
+#define HAL_DCMI_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Capture_Mode
+ * @{
+ */
+#define DCMI_MODE_CONTINUOUS ((uint32_t)0x00000000) /*!< The received data are transferred continuously
+ into the destination memory through the DMA */
+#define DCMI_MODE_SNAPSHOT ((uint32_t)DCMI_CR_CM) /*!< Once activated, the interface waits for the start of
+ frame and then transfers a single frame through the DMA */
+
+#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \
+ ((MODE) == DCMI_MODE_SNAPSHOT))
+/**
+ * @}
+ */
+
+
+/** @defgroup DCMI_Synchronization_Mode
+ * @{
+ */
+#define DCMI_SYNCHRO_HARDWARE ((uint32_t)0x00000000) /*!< Hardware synchronization data capture (frame/line start/stop)
+ is synchronized with the HSYNC/VSYNC signals */
+#define DCMI_SYNCHRO_EMBEDDED ((uint32_t)DCMI_CR_ESS) /*!< Embedded synchronization data capture is synchronized with
+ synchronization codes embedded in the data flow */
+
+#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \
+ ((MODE) == DCMI_SYNCHRO_EMBEDDED))
+/**
+ * @}
+ */
+
+
+/** @defgroup DCMI_PIXCK_Polarity
+ * @{
+ */
+#define DCMI_PCKPOLARITY_FALLING ((uint32_t)0x00000000) /*!< Pixel clock active on Falling edge */
+#define DCMI_PCKPOLARITY_RISING ((uint32_t)DCMI_CR_PCKPOL) /*!< Pixel clock active on Rising edge */
+
+#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \
+ ((POLARITY) == DCMI_PCKPOLARITY_RISING))
+/**
+ * @}
+ */
+
+
+/** @defgroup DCMI_VSYNC_Polarity
+ * @{
+ */
+#define DCMI_VSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Vertical synchronization active Low */
+#define DCMI_VSPOLARITY_HIGH ((uint32_t)DCMI_CR_VSPOL) /*!< Vertical synchronization active High */
+
+#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \
+ ((POLARITY) == DCMI_VSPOLARITY_HIGH))
+/**
+ * @}
+ */
+
+
+/** @defgroup DCMI_HSYNC_Polarity
+ * @{
+ */
+#define DCMI_HSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Horizontal synchronization active Low */
+#define DCMI_HSPOLARITY_HIGH ((uint32_t)DCMI_CR_HSPOL) /*!< Horizontal synchronization active High */
+
+#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \
+ ((POLARITY) == DCMI_HSPOLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_MODE_JPEG
+ * @{
+ */
+#define DCMI_JPEG_DISABLE ((uint32_t)0x00000000) /*!< Mode JPEG Disabled */
+#define DCMI_JPEG_ENABLE ((uint32_t)DCMI_CR_JPEG) /*!< Mode JPEG Enabled */
+
+#define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \
+ ((JPEG_MODE) == DCMI_JPEG_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Capture_Rate
+ * @{
+ */
+#define DCMI_CR_ALL_FRAME ((uint32_t)0x00000000) /*!< All frames are captured */
+#define DCMI_CR_ALTERNATE_2_FRAME ((uint32_t)DCMI_CR_FCRC_0) /*!< Every alternate frame captured */
+#define DCMI_CR_ALTERNATE_4_FRAME ((uint32_t)DCMI_CR_FCRC_1) /*!< One frame in 4 frames captured */
+
+#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME) || \
+ ((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \
+ ((RATE) == DCMI_CR_ALTERNATE_4_FRAME))
+/**
+ * @}
+ */
+
+
+/** @defgroup DCMI_Extended_Data_Mode
+ * @{
+ */
+#define DCMI_EXTEND_DATA_8B ((uint32_t)0x00000000) /*!< Interface captures 8-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_10B ((uint32_t)DCMI_CR_EDM_0) /*!< Interface captures 10-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_12B ((uint32_t)DCMI_CR_EDM_1) /*!< Interface captures 12-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_14B ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1)) /*!< Interface captures 14-bit data on every pixel clock */
+
+#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B) || \
+ ((DATA) == DCMI_EXTEND_DATA_10B) || \
+ ((DATA) == DCMI_EXTEND_DATA_12B) || \
+ ((DATA) == DCMI_EXTEND_DATA_14B))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Window_Coordinate
+ * @{
+ */
+#define DCMI_WINDOW_COORDINATE ((uint32_t)0x3FFF) /*!< Window coordinate */
+
+#define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE)
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Window_Height
+ * @{
+ */
+#define DCMI_WINDOW_HEIGHT ((uint32_t)0x1FFF) /*!< Window Height */
+
+#define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT)
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_interrupt_sources
+ * @{
+ */
+#define DCMI_IT_FRAME ((uint32_t)DCMI_IER_FRAME_IE)
+#define DCMI_IT_OVF ((uint32_t)DCMI_IER_OVF_IE)
+#define DCMI_IT_ERR ((uint32_t)DCMI_IER_ERR_IE)
+#define DCMI_IT_VSYNC ((uint32_t)DCMI_IER_VSYNC_IE)
+#define DCMI_IT_LINE ((uint32_t)DCMI_IER_LINE_IE)
+
+#define IS_DCMI_CONFIG_IT(IT) ((((IT) & (uint16_t)0xFFE0) == 0x0000) && ((IT) != 0x0000))
+
+#define IS_DCMI_GET_IT(IT) (((IT) == DCMI_IT_FRAME) || \
+ ((IT) == DCMI_IT_OVF) || \
+ ((IT) == DCMI_IT_ERR) || \
+ ((IT) == DCMI_IT_VSYNC) || \
+ ((IT) == DCMI_IT_LINE))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Flags
+ * @{
+ */
+/**
+ * @brief DCMI SR register
+ */
+#define DCMI_FLAG_HSYNC ((uint32_t)0x2001)
+#define DCMI_FLAG_VSYNC ((uint32_t)0x2002)
+#define DCMI_FLAG_FNE ((uint32_t)0x2004)
+/**
+ * @brief DCMI RISR register
+ */
+#define DCMI_FLAG_FRAMERI ((uint32_t)DCMI_RISR_FRAME_RIS)
+#define DCMI_FLAG_OVFRI ((uint32_t)DCMI_RISR_OVF_RIS)
+#define DCMI_FLAG_ERRRI ((uint32_t)DCMI_RISR_ERR_RIS)
+#define DCMI_FLAG_VSYNCRI ((uint32_t)DCMI_RISR_VSYNC_RIS)
+#define DCMI_FLAG_LINERI ((uint32_t)DCMI_RISR_LINE_RIS)
+/**
+ * @brief DCMI MISR register
+ */
+#define DCMI_FLAG_FRAMEMI ((uint32_t)0x1001)
+#define DCMI_FLAG_OVFMI ((uint32_t)0x1002)
+#define DCMI_FLAG_ERRMI ((uint32_t)0x1004)
+#define DCMI_FLAG_VSYNCMI ((uint32_t)0x1008)
+#define DCMI_FLAG_LINEMI ((uint32_t)0x1010)
+#define IS_DCMI_GET_FLAG(FLAG) (((FLAG) == DCMI_FLAG_HSYNC) || \
+ ((FLAG) == DCMI_FLAG_VSYNC) || \
+ ((FLAG) == DCMI_FLAG_FNE) || \
+ ((FLAG) == DCMI_FLAG_FRAMERI) || \
+ ((FLAG) == DCMI_FLAG_OVFRI) || \
+ ((FLAG) == DCMI_FLAG_ERRRI) || \
+ ((FLAG) == DCMI_FLAG_VSYNCRI) || \
+ ((FLAG) == DCMI_FLAG_LINERI) || \
+ ((FLAG) == DCMI_FLAG_FRAMEMI) || \
+ ((FLAG) == DCMI_FLAG_OVFMI) || \
+ ((FLAG) == DCMI_FLAG_ERRMI) || \
+ ((FLAG) == DCMI_FLAG_VSYNCMI) || \
+ ((FLAG) == DCMI_FLAG_LINEMI))
+
+#define IS_DCMI_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFE0) == 0x0000) && ((FLAG) != 0x0000))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/**
+ * @brief Enable the DCMI.
+ * @param __HANDLE__: DCMI handle
+ * @retval None
+ */
+#define __HAL_DCMI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE)
+
+/**
+ * @brief Disable the DCMI.
+ * @param __HANDLE__: DCMI handle
+ * @retval None
+ */
+#define __HAL_DCMI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE))
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the DCMI pending flags.
+ * @param __HANDLE__: DCMI handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+ * @arg DCMI_FLAG_OVFRI: Overflow flag mask
+ * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+ * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+ * @arg DCMI_FLAG_LINERI: Line flag mask
+ * @retval The state of FLAG.
+ */
+#define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\
+((((__FLAG__) & 0x3000) == 0x0)? ((__HANDLE__)->Instance->RISR & (__FLAG__)) :\
+ (((__FLAG__) & 0x2000) == 0x0)? ((__HANDLE__)->Instance->MISR & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__)))
+
+/**
+ * @brief Clear the DCMI pending flags.
+ * @param __HANDLE__: DCMI handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+ * @arg DCMI_FLAG_OVFRI: Overflow flag mask
+ * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+ * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+ * @arg DCMI_FLAG_LINERI: Line flag mask
+ * @retval None
+ */
+#define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR |= (__FLAG__))
+
+/**
+ * @brief Enable the specified DCMI interrupts.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVF: Overflow interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval None
+ */
+#define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified DCMI interrupts.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVF: Overflow interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval None
+ */
+#define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified DCMI interrupt has occurred or not.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVF: Overflow interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval The state of INTERRUPT.
+ */
+#define __HAL_DCMI_IT_STATUS(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *******************************/
+HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi);
+__weak void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi);
+__weak void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi);
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi);
+__weak void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi);
+__weak void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi);
+__weak void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi);
+__weak void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_DCMI_ConfigCROP(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize);
+HAL_StatusTypeDef HAL_DCMI_EnableCROP(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef HAL_DCMI_DisableCROP(DCMI_HandleTypeDef *hdcmi);
+
+/* Peripheral State functions ***************************************************/
+HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi);
+uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DCMI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/