Diff: TARGET_ARCH_MAX/stm32f4xx_hal_pwr_ex.h

Revision:

89:552587b429a1

Child:

92:4fc01daae5a5

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_ARCH_MAX/stm32f4xx_hal_pwr_ex.h	Fri Sep 12 16:41:52 2014 +0100
@@ -0,0 +1,161 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pwr_ex.h
+  * @author  MCD Application Team
+  * @version V1.1.0RC2
+  * @date    14-May-2014
+  * @brief   Header file of PWR HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_EX_H
+#define __STM32F4xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWREx
+  * @{
+  */ 
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Exported types ------------------------------------------------------------*/ 
+/* Exported constants --------------------------------------------------------*/
+/* ------------- PWR registers bit address in the alias region ---------------*/
+/* --- CR Register ---*/
+
+/* Alias word address of ODEN bit   */
+#define ODEN_BitNumber           0x10
+#define CR_ODEN_BB               (PERIPH_BB_BASE + (CR_OFFSET * 32) + (ODEN_BitNumber * 4))
+
+/* Alias word address of ODSWEN bit */
+#define ODSWEN_BitNumber         0x11
+#define CR_ODSWEN_BB             (PERIPH_BB_BASE + (CR_OFFSET * 32) + (ODSWEN_BitNumber * 4))
+    
+
+/** @defgroup PWREx_Over_Under_Drive_Flag 
+  * @{
+  */
+#define PWR_FLAG_ODRDY                  PWR_CSR_ODRDY
+#define PWR_FLAG_ODSWRDY                PWR_CSR_ODSWRDY
+#define PWR_FLAG_UDRDY                  PWR_CSR_UDSWRDY
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+  
+/** @brief Macros to enable or disable the Over drive mode.
+  * @note  These macros can be used only for STM32F42xx/STM3243xx devices.
+  */
+#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Over drive switching.
+  * @note  These macros can be used only for STM32F42xx/STM3243xx devices. 
+  */
+#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Under drive mode.
+  * @note  This mode is enabled only with STOP low power mode.
+  *        In this mode, the 1.2V domain is preserved in reduced leakage mode. This 
+  *        mode is only available when the main regulator or the low power regulator 
+  *        is in low voltage mode.      
+  * @note  If the Under-drive mode was enabled, it is automatically disabled after 
+  *        exiting Stop mode. 
+  *        When the voltage regulator operates in Under-drive mode, an additional  
+  *        startup delay is induced when waking up from Stop mode.
+  */
+#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
+#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
+
+/** @brief  Check PWR flag is set or not.
+  * @note   These macros can be used only for STM32F42xx/STM3243xx devices.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
+  *                                 is ready 
+  *            @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
+  *                                   switching is ready  
+  *            @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
+  *                                 is enabled in Stop mode
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the Under-Drive Ready flag.
+  * @note  These macros can be used only for STM32F42xx/STM3243xx devices.
+  */
+#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/* Exported functions --------------------------------------------------------*/
+void              HAL_PWREx_EnableFlashPowerDown(void);
+void              HAL_PWREx_DisableFlashPowerDown(void); 
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); 
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+HAL_StatusTypeDef HAL_PWREx_ActivateOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_DeactivateOverDrive(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/