The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of mbed by
Diff: TARGET_NUCLEO_F401RE/stm32f4xx_hal_dcmi.h
- Revision:
- 85:024bf7f99721
- Parent:
- 81:7d30d6019079
- Child:
- 90:cb3d968589d8
--- a/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dcmi.h Mon May 19 18:14:09 2014 +0100 +++ b/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dcmi.h Wed Jun 11 15:14:05 2014 +0100 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f4xx_hal_dcmi.h * @author MCD Application Team - * @version V1.0.0 - * @date 18-February-2014 + * @version V1.1.0RC2 + * @date 14-May-2014 * @brief Header file of DCMI HAL module. ****************************************************************************** * @attention @@ -59,17 +59,16 @@ /* Exported types ------------------------------------------------------------*/ /** - * @brief DCMI Error source - */ + * @brief DCMI Error source + */ typedef enum { DCMI_ERROR_SYNC = 1, /*!< Synchronisation error */ DCMI_OVERRUN = 2, /*!< DCMI Overrun */ - -}DCMI_ErrorTypeDef; +}DCMI_ErrorTypeDef; /** - * @brief DCMI Embedded Synchronisation CODE Init structure definition + * @brief DCMI Embedded Synchronisation CODE Init structure definition */ typedef struct { @@ -77,11 +76,10 @@ uint8_t LineStartCode; /*!< Specifies the code of the line start delimiter. */ uint8_t LineEndCode; /*!< Specifies the code of the line end delimiter. */ uint8_t FrameEndCode; /*!< Specifies the code of the frame end delimiter. */ - }DCMI_CodesInitTypeDef; /** - * @brief DCMI Init structure definition + * @brief DCMI Init structure definition */ typedef struct { @@ -102,17 +100,16 @@ uint32_t ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit. This parameter can be a value of @ref DCMI_Extended_Data_Mode */ - + DCMI_CodesInitTypeDef SyncroCode; /*!< Specifies the code of the frame start delimiter. */ - + uint32_t JPEGMode; /*!< Enable or Disable the JPEG mode. - This parameter can be a value of @ref DCMI_MODE_JPEG */ - + This parameter can be a value of @ref DCMI_MODE_JPEG */ + }DCMI_InitTypeDef; - /** - * @brief HAL DCMI State structures definition + * @brief HAL DCMI State structures definition */ typedef enum { @@ -121,35 +118,34 @@ HAL_DCMI_STATE_BUSY = 0x02, /*!< DCMI internal processing is ongoing */ HAL_DCMI_STATE_TIMEOUT = 0x03, /*!< DCMI timeout state */ HAL_DCMI_STATE_ERROR = 0x04 /*!< DCMI error state */ - }HAL_DCMI_StateTypeDef; /** - * @brief DCMI handle Structure definition - */ + * @brief DCMI handle Structure definition + */ typedef struct -{ +{ DCMI_TypeDef *Instance; /*!< DCMI Register base address */ - + DCMI_InitTypeDef Init; /*!< DCMI parameters */ - + HAL_LockTypeDef Lock; /*!< DCMI locking object */ - + __IO HAL_DCMI_StateTypeDef State; /*!< DCMI state */ - + __IO uint32_t XferCount; /*!< DMA transfer counter */ - + __IO uint32_t XferSize; /*!< DMA transfer size */ - - uint32_t XferTransferNumber; /*!< DMA transfer number */ + + uint32_t XferTransferNumber; /*!< DMA transfer number */ - uint32_t pBuffPtr; /*!< Pointer to DMA output buffer */ - + uint32_t pBuffPtr; /*!< Pointer to DMA output buffer */ + DMA_HandleTypeDef *DMA_Handle; /*!< Pointer to the DMA handler */ - __IO uint32_t ErrorCode; /*!< DCMI Error code */ - -}DCMI_HandleTypeDef; + __IO uint32_t ErrorCode; /*!< DCMI Error code */ + +}DCMI_HandleTypeDef; /* Exported constants --------------------------------------------------------*/ @@ -162,13 +158,13 @@ */ #define HAL_DCMI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ #define HAL_DCMI_ERROR_OVF ((uint32_t)0x00000001) /*!< Overflow error */ -#define HAL_DCMI_ERROR_SYNC ((uint32_t)0x00000002) /*!< Synchronization error */ +#define HAL_DCMI_ERROR_SYNC ((uint32_t)0x00000002) /*!< Synchronization error */ #define HAL_DCMI_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */ /** * @} - */ + */ -/** @defgroup DCMI_Capture_Mode +/** @defgroup DCMI_Capture_Mode * @{ */ #define DCMI_MODE_CONTINUOUS ((uint32_t)0x00000000) /*!< The received data are transferred continuously @@ -180,8 +176,7 @@ ((MODE) == DCMI_MODE_SNAPSHOT)) /** * @} - */ - + */ /** @defgroup DCMI_Synchronization_Mode * @{ @@ -190,17 +185,16 @@ is synchronized with the HSYNC/VSYNC signals */ #define DCMI_SYNCHRO_EMBEDDED ((uint32_t)DCMI_CR_ESS) /*!< Embedded synchronization data capture is synchronized with synchronization codes embedded in the data flow */ - + #define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \ ((MODE) == DCMI_SYNCHRO_EMBEDDED)) /** * @} - */ - + */ -/** @defgroup DCMI_PIXCK_Polarity +/** @defgroup DCMI_PIXCK_Polarity * @{ - */ + */ #define DCMI_PCKPOLARITY_FALLING ((uint32_t)0x00000000) /*!< Pixel clock active on Falling edge */ #define DCMI_PCKPOLARITY_RISING ((uint32_t)DCMI_CR_PCKPOL) /*!< Pixel clock active on Rising edge */ @@ -208,12 +202,11 @@ ((POLARITY) == DCMI_PCKPOLARITY_RISING)) /** * @} - */ - + */ -/** @defgroup DCMI_VSYNC_Polarity +/** @defgroup DCMI_VSYNC_Polarity * @{ - */ + */ #define DCMI_VSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Vertical synchronization active Low */ #define DCMI_VSPOLARITY_HIGH ((uint32_t)DCMI_CR_VSPOL) /*!< Vertical synchronization active High */ @@ -221,10 +214,9 @@ ((POLARITY) == DCMI_VSPOLARITY_HIGH)) /** * @} - */ + */ - -/** @defgroup DCMI_HSYNC_Polarity +/** @defgroup DCMI_HSYNC_Polarity * @{ */ #define DCMI_HSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Horizontal synchronization active Low */ @@ -234,11 +226,11 @@ ((POLARITY) == DCMI_HSPOLARITY_HIGH)) /** * @} - */ + */ /** @defgroup DCMI_MODE_JPEG * @{ - */ + */ #define DCMI_JPEG_DISABLE ((uint32_t)0x00000000) /*!< Mode JPEG Disabled */ #define DCMI_JPEG_ENABLE ((uint32_t)DCMI_CR_JPEG) /*!< Mode JPEG Enabled */ @@ -246,11 +238,11 @@ ((JPEG_MODE) == DCMI_JPEG_ENABLE)) /** * @} - */ + */ /** @defgroup DCMI_Capture_Rate * @{ - */ + */ #define DCMI_CR_ALL_FRAME ((uint32_t)0x00000000) /*!< All frames are captured */ #define DCMI_CR_ALTERNATE_2_FRAME ((uint32_t)DCMI_CR_FCRC_0) /*!< Every alternate frame captured */ #define DCMI_CR_ALTERNATE_4_FRAME ((uint32_t)DCMI_CR_FCRC_1) /*!< One frame in 4 frames captured */ @@ -260,12 +252,11 @@ ((RATE) == DCMI_CR_ALTERNATE_4_FRAME)) /** * @} - */ - + */ /** @defgroup DCMI_Extended_Data_Mode * @{ - */ + */ #define DCMI_EXTEND_DATA_8B ((uint32_t)0x00000000) /*!< Interface captures 8-bit data on every pixel clock */ #define DCMI_EXTEND_DATA_10B ((uint32_t)DCMI_CR_EDM_0) /*!< Interface captures 10-bit data on every pixel clock */ #define DCMI_EXTEND_DATA_12B ((uint32_t)DCMI_CR_EDM_1) /*!< Interface captures 12-bit data on every pixel clock */ @@ -277,11 +268,11 @@ ((DATA) == DCMI_EXTEND_DATA_14B)) /** * @} - */ + */ /** @defgroup DCMI_Window_Coordinate * @{ - */ + */ #define DCMI_WINDOW_COORDINATE ((uint32_t)0x3FFF) /*!< Window coordinate */ #define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE) @@ -297,11 +288,11 @@ #define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT) /** * @} - */ + */ -/** @defgroup DCMI_interrupt_sources +/** @defgroup DCMI_interrupt_sources * @{ - */ + */ #define DCMI_IT_FRAME ((uint32_t)DCMI_IER_FRAME_IE) #define DCMI_IT_OVF ((uint32_t)DCMI_IER_OVF_IE) #define DCMI_IT_ERR ((uint32_t)DCMI_IER_ERR_IE) @@ -317,13 +308,14 @@ ((IT) == DCMI_IT_LINE)) /** * @} - */ + */ -/** @defgroup DCMI_Flags +/** @defgroup DCMI_Flags * @{ - */ + */ + /** - * @brief DCMI SR register + * @brief DCMI SR register */ #define DCMI_FLAG_HSYNC ((uint32_t)0x2001) #define DCMI_FLAG_VSYNC ((uint32_t)0x2002) @@ -368,6 +360,13 @@ */ /* Exported macro ------------------------------------------------------------*/ + +/** @brief Reset DCMI handle state + * @param __HANDLE__: specifies the DCMI handle. + * @retval None + */ +#define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DCMI_STATE_RESET) + /** * @brief Enable the DCMI. * @param __HANDLE__: DCMI handle @@ -455,15 +454,15 @@ */ #define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) -/* Exported functions --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ -/* Initialization and de-initialization functions *******************************/ +/* Initialization and de-initialization functions *****************************/ HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi); HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi); void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi); void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi); -/* IO operation functions *******************************************************/ +/* IO operation functions *****************************************************/ HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length); HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi); void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi); @@ -472,12 +471,12 @@ void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi); void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi); -/* Peripheral Control functions *************************************************/ +/* Peripheral Control functions ***********************************************/ HAL_StatusTypeDef HAL_DCMI_ConfigCROP(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize); HAL_StatusTypeDef HAL_DCMI_EnableCROP(DCMI_HandleTypeDef *hdcmi); HAL_StatusTypeDef HAL_DCMI_DisableCROP(DCMI_HandleTypeDef *hdcmi); -/* Peripheral State functions ***************************************************/ +/* Peripheral State functions *************************************************/ HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi); uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi);