Egor Rumjantsev
The official mbed C/C SDK provides the software platform and libraries to build your applications.
Fork of
mbed
by 
mbed official
TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_sd.h@99:7f6c6de930c0, 2015-05-03 (annotated)
- Committer:
- Mikchel
- Date:
- Sun May 03 16:04:42 2015 +0000
- Revision:
- 99:7f6c6de930c0
- Parent:
- 93:e188a91d3eaa
12
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| Kojto | 93:e188a91d3eaa | 1 | /** |
| Kojto | 93:e188a91d3eaa | 2 | ****************************************************************************** |
| Kojto | 93:e188a91d3eaa | 3 | * @file stm32f4xx_hal_sd.h |
| Kojto | 93:e188a91d3eaa | 4 | * @author MCD Application Team |
| Kojto | 93:e188a91d3eaa | 5 | * @version V1.1.0 |
| Kojto | 93:e188a91d3eaa | 6 | * @date 19-June-2014 |
| Kojto | 93:e188a91d3eaa | 7 | * @brief Header file of SD HAL module. |
| Kojto | 93:e188a91d3eaa | 8 | ****************************************************************************** |
| Kojto | 93:e188a91d3eaa | 9 | * @attention |
| Kojto | 93:e188a91d3eaa | 10 | * |
| Kojto | 93:e188a91d3eaa | 11 | * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> |
| Kojto | 93:e188a91d3eaa | 12 | * |
| Kojto | 93:e188a91d3eaa | 13 | * Redistribution and use in source and binary forms, with or without modification, |
| Kojto | 93:e188a91d3eaa | 14 | * are permitted provided that the following conditions are met: |
| Kojto | 93:e188a91d3eaa | 15 | * 1. Redistributions of source code must retain the above copyright notice, |
| Kojto | 93:e188a91d3eaa | 16 | * this list of conditions and the following disclaimer. |
| Kojto | 93:e188a91d3eaa | 17 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
| Kojto | 93:e188a91d3eaa | 18 | * this list of conditions and the following disclaimer in the documentation |
| Kojto | 93:e188a91d3eaa | 19 | * and/or other materials provided with the distribution. |
| Kojto | 93:e188a91d3eaa | 20 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| Kojto | 93:e188a91d3eaa | 21 | * may be used to endorse or promote products derived from this software |
| Kojto | 93:e188a91d3eaa | 22 | * without specific prior written permission. |
| Kojto | 93:e188a91d3eaa | 23 | * |
| Kojto | 93:e188a91d3eaa | 24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| Kojto | 93:e188a91d3eaa | 25 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| Kojto | 93:e188a91d3eaa | 26 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| Kojto | 93:e188a91d3eaa | 27 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| Kojto | 93:e188a91d3eaa | 28 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| Kojto | 93:e188a91d3eaa | 29 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| Kojto | 93:e188a91d3eaa | 30 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| Kojto | 93:e188a91d3eaa | 31 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| Kojto | 93:e188a91d3eaa | 32 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| Kojto | 93:e188a91d3eaa | 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| Kojto | 93:e188a91d3eaa | 34 | * |
| Kojto | 93:e188a91d3eaa | 35 | ****************************************************************************** |
| Kojto | 93:e188a91d3eaa | 36 | */ |
| Kojto | 93:e188a91d3eaa | 37 | |
| Kojto | 93:e188a91d3eaa | 38 | /* Define to prevent recursive inclusion -------------------------------------*/ |
| Kojto | 93:e188a91d3eaa | 39 | #ifndef __STM32F4xx_HAL_SD_H |
| Kojto | 93:e188a91d3eaa | 40 | #define __STM32F4xx_HAL_SD_H |
| Kojto | 93:e188a91d3eaa | 41 | |
| Kojto | 93:e188a91d3eaa | 42 | #ifdef __cplusplus |
| Kojto | 93:e188a91d3eaa | 43 | extern "C" { |
| Kojto | 93:e188a91d3eaa | 44 | #endif |
| Kojto | 93:e188a91d3eaa | 45 | |
| Kojto | 93:e188a91d3eaa | 46 | /* Includes ------------------------------------------------------------------*/ |
| Kojto | 93:e188a91d3eaa | 47 | #include "stm32f4xx_ll_sdmmc.h" |
| Kojto | 93:e188a91d3eaa | 48 | |
| Kojto | 93:e188a91d3eaa | 49 | /** @addtogroup STM32F4xx_HAL_Driver |
| Kojto | 93:e188a91d3eaa | 50 | * @{ |
| Kojto | 93:e188a91d3eaa | 51 | */ |
| Kojto | 93:e188a91d3eaa | 52 | |
| Kojto | 93:e188a91d3eaa | 53 | /** @addtogroup SD |
| Kojto | 93:e188a91d3eaa | 54 | * @{ |
| Kojto | 93:e188a91d3eaa | 55 | */ |
| Kojto | 93:e188a91d3eaa | 56 | |
| Kojto | 93:e188a91d3eaa | 57 | /* Exported types ------------------------------------------------------------*/ |
| Kojto | 93:e188a91d3eaa | 58 | /** @defgroup SD_Exported_Types |
| Kojto | 93:e188a91d3eaa | 59 | * @{ |
| Kojto | 93:e188a91d3eaa | 60 | */ |
| Kojto | 93:e188a91d3eaa | 61 | #define SD_InitTypeDef SDIO_InitTypeDef |
| Kojto | 93:e188a91d3eaa | 62 | #define SD_TypeDef SDIO_TypeDef |
| Kojto | 93:e188a91d3eaa | 63 | |
| Kojto | 93:e188a91d3eaa | 64 | /** |
| Kojto | 93:e188a91d3eaa | 65 | * @brief SDIO Handle Structure definition |
| Kojto | 93:e188a91d3eaa | 66 | */ |
| Kojto | 93:e188a91d3eaa | 67 | typedef struct |
| Kojto | 93:e188a91d3eaa | 68 | { |
| Kojto | 93:e188a91d3eaa | 69 | SD_TypeDef *Instance; /*!< SDIO register base address */ |
| Kojto | 93:e188a91d3eaa | 70 | |
| Kojto | 93:e188a91d3eaa | 71 | SD_InitTypeDef Init; /*!< SD required parameters */ |
| Kojto | 93:e188a91d3eaa | 72 | |
| Kojto | 93:e188a91d3eaa | 73 | HAL_LockTypeDef Lock; /*!< SD locking object */ |
| Kojto | 93:e188a91d3eaa | 74 | |
| Kojto | 93:e188a91d3eaa | 75 | uint32_t CardType; /*!< SD card type */ |
| Kojto | 93:e188a91d3eaa | 76 | |
| Kojto | 93:e188a91d3eaa | 77 | uint32_t RCA; /*!< SD relative card address */ |
| Kojto | 93:e188a91d3eaa | 78 | |
| Kojto | 93:e188a91d3eaa | 79 | uint32_t CSD[4]; /*!< SD card specific data table */ |
| Kojto | 93:e188a91d3eaa | 80 | |
| Kojto | 93:e188a91d3eaa | 81 | uint32_t CID[4]; /*!< SD card identification number table */ |
| Kojto | 93:e188a91d3eaa | 82 | |
| Kojto | 93:e188a91d3eaa | 83 | __IO uint32_t SdTransferCplt; /*!< SD transfer complete flag in non blocking mode */ |
| Kojto | 93:e188a91d3eaa | 84 | |
| Kojto | 93:e188a91d3eaa | 85 | __IO uint32_t SdTransferErr; /*!< SD transfer error flag in non blocking mode */ |
| Kojto | 93:e188a91d3eaa | 86 | |
| Kojto | 93:e188a91d3eaa | 87 | __IO uint32_t DmaTransferCplt; /*!< SD DMA transfer complete flag */ |
| Kojto | 93:e188a91d3eaa | 88 | |
| Kojto | 93:e188a91d3eaa | 89 | __IO uint32_t SdOperation; /*!< SD transfer operation (read/write) */ |
| Kojto | 93:e188a91d3eaa | 90 | |
| Kojto | 93:e188a91d3eaa | 91 | DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */ |
| Kojto | 93:e188a91d3eaa | 92 | |
| Kojto | 93:e188a91d3eaa | 93 | DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */ |
| Kojto | 93:e188a91d3eaa | 94 | |
| Kojto | 93:e188a91d3eaa | 95 | }SD_HandleTypeDef; |
| Kojto | 93:e188a91d3eaa | 96 | |
| Kojto | 93:e188a91d3eaa | 97 | /** |
| Kojto | 93:e188a91d3eaa | 98 | * @brief Card Specific Data: CSD Register |
| Kojto | 93:e188a91d3eaa | 99 | */ |
| Kojto | 93:e188a91d3eaa | 100 | typedef struct |
| Kojto | 93:e188a91d3eaa | 101 | { |
| Kojto | 93:e188a91d3eaa | 102 | __IO uint8_t CSDStruct; /*!< CSD structure */ |
| Kojto | 93:e188a91d3eaa | 103 | __IO uint8_t SysSpecVersion; /*!< System specification version */ |
| Kojto | 93:e188a91d3eaa | 104 | __IO uint8_t Reserved1; /*!< Reserved */ |
| Kojto | 93:e188a91d3eaa | 105 | __IO uint8_t TAAC; /*!< Data read access time 1 */ |
| Kojto | 93:e188a91d3eaa | 106 | __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ |
| Kojto | 93:e188a91d3eaa | 107 | __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ |
| Kojto | 93:e188a91d3eaa | 108 | __IO uint16_t CardComdClasses; /*!< Card command classes */ |
| Kojto | 93:e188a91d3eaa | 109 | __IO uint8_t RdBlockLen; /*!< Max. read data block length */ |
| Kojto | 93:e188a91d3eaa | 110 | __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ |
| Kojto | 93:e188a91d3eaa | 111 | __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ |
| Kojto | 93:e188a91d3eaa | 112 | __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ |
| Kojto | 93:e188a91d3eaa | 113 | __IO uint8_t DSRImpl; /*!< DSR implemented */ |
| Kojto | 93:e188a91d3eaa | 114 | __IO uint8_t Reserved2; /*!< Reserved */ |
| Kojto | 93:e188a91d3eaa | 115 | __IO uint32_t DeviceSize; /*!< Device Size */ |
| Kojto | 93:e188a91d3eaa | 116 | __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ |
| Kojto | 93:e188a91d3eaa | 117 | __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ |
| Kojto | 93:e188a91d3eaa | 118 | __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ |
| Kojto | 93:e188a91d3eaa | 119 | __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ |
| Kojto | 93:e188a91d3eaa | 120 | __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ |
| Kojto | 93:e188a91d3eaa | 121 | __IO uint8_t EraseGrSize; /*!< Erase group size */ |
| Kojto | 93:e188a91d3eaa | 122 | __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ |
| Kojto | 93:e188a91d3eaa | 123 | __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ |
| Kojto | 93:e188a91d3eaa | 124 | __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ |
| Kojto | 93:e188a91d3eaa | 125 | __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ |
| Kojto | 93:e188a91d3eaa | 126 | __IO uint8_t WrSpeedFact; /*!< Write speed factor */ |
| Kojto | 93:e188a91d3eaa | 127 | __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ |
| Kojto | 93:e188a91d3eaa | 128 | __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ |
| Kojto | 93:e188a91d3eaa | 129 | __IO uint8_t Reserved3; /*!< Reserved */ |
| Kojto | 93:e188a91d3eaa | 130 | __IO uint8_t ContentProtectAppli; /*!< Content protection application */ |
| Kojto | 93:e188a91d3eaa | 131 | __IO uint8_t FileFormatGrouop; /*!< File format group */ |
| Kojto | 93:e188a91d3eaa | 132 | __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ |
| Kojto | 93:e188a91d3eaa | 133 | __IO uint8_t PermWrProtect; /*!< Permanent write protection */ |
| Kojto | 93:e188a91d3eaa | 134 | __IO uint8_t TempWrProtect; /*!< Temporary write protection */ |
| Kojto | 93:e188a91d3eaa | 135 | __IO uint8_t FileFormat; /*!< File format */ |
| Kojto | 93:e188a91d3eaa | 136 | __IO uint8_t ECC; /*!< ECC code */ |
| Kojto | 93:e188a91d3eaa | 137 | __IO uint8_t CSD_CRC; /*!< CSD CRC */ |
| Kojto | 93:e188a91d3eaa | 138 | __IO uint8_t Reserved4; /*!< Always 1 */ |
| Kojto | 93:e188a91d3eaa | 139 | |
| Kojto | 93:e188a91d3eaa | 140 | }HAL_SD_CSDTypedef; |
| Kojto | 93:e188a91d3eaa | 141 | |
| Kojto | 93:e188a91d3eaa | 142 | /** |
| Kojto | 93:e188a91d3eaa | 143 | * @brief Card Identification Data: CID Register |
| Kojto | 93:e188a91d3eaa | 144 | */ |
| Kojto | 93:e188a91d3eaa | 145 | typedef struct |
| Kojto | 93:e188a91d3eaa | 146 | { |
| Kojto | 93:e188a91d3eaa | 147 | __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ |
| Kojto | 93:e188a91d3eaa | 148 | __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ |
| Kojto | 93:e188a91d3eaa | 149 | __IO uint32_t ProdName1; /*!< Product Name part1 */ |
| Kojto | 93:e188a91d3eaa | 150 | __IO uint8_t ProdName2; /*!< Product Name part2 */ |
| Kojto | 93:e188a91d3eaa | 151 | __IO uint8_t ProdRev; /*!< Product Revision */ |
| Kojto | 93:e188a91d3eaa | 152 | __IO uint32_t ProdSN; /*!< Product Serial Number */ |
| Kojto | 93:e188a91d3eaa | 153 | __IO uint8_t Reserved1; /*!< Reserved1 */ |
| Kojto | 93:e188a91d3eaa | 154 | __IO uint16_t ManufactDate; /*!< Manufacturing Date */ |
| Kojto | 93:e188a91d3eaa | 155 | __IO uint8_t CID_CRC; /*!< CID CRC */ |
| Kojto | 93:e188a91d3eaa | 156 | __IO uint8_t Reserved2; /*!< Always 1 */ |
| Kojto | 93:e188a91d3eaa | 157 | |
| Kojto | 93:e188a91d3eaa | 158 | }HAL_SD_CIDTypedef; |
| Kojto | 93:e188a91d3eaa | 159 | |
| Kojto | 93:e188a91d3eaa | 160 | /** |
| Kojto | 93:e188a91d3eaa | 161 | * @brief SD Card Status returned by ACMD13 |
| Kojto | 93:e188a91d3eaa | 162 | */ |
| Kojto | 93:e188a91d3eaa | 163 | typedef struct |
| Kojto | 93:e188a91d3eaa | 164 | { |
| Kojto | 93:e188a91d3eaa | 165 | __IO uint8_t DAT_BUS_WIDTH; /*!< Shows the currently defined data bus width */ |
| Kojto | 93:e188a91d3eaa | 166 | __IO uint8_t SECURED_MODE; /*!< Card is in secured mode of operation */ |
| Kojto | 93:e188a91d3eaa | 167 | __IO uint16_t SD_CARD_TYPE; /*!< Carries information about card type */ |
| Kojto | 93:e188a91d3eaa | 168 | __IO uint32_t SIZE_OF_PROTECTED_AREA; /*!< Carries information about the capacity of protected area */ |
| Kojto | 93:e188a91d3eaa | 169 | __IO uint8_t SPEED_CLASS; /*!< Carries information about the speed class of the card */ |
| Kojto | 93:e188a91d3eaa | 170 | __IO uint8_t PERFORMANCE_MOVE; /*!< Carries information about the card's performance move */ |
| Kojto | 93:e188a91d3eaa | 171 | __IO uint8_t AU_SIZE; /*!< Carries information about the card's allocation unit size */ |
| Kojto | 93:e188a91d3eaa | 172 | __IO uint16_t ERASE_SIZE; /*!< Determines the number of AUs to be erased in one operation */ |
| Kojto | 93:e188a91d3eaa | 173 | __IO uint8_t ERASE_TIMEOUT; /*!< Determines the timeout for any number of AU erase */ |
| Kojto | 93:e188a91d3eaa | 174 | __IO uint8_t ERASE_OFFSET; /*!< Carries information about the erase offset */ |
| Kojto | 93:e188a91d3eaa | 175 | |
| Kojto | 93:e188a91d3eaa | 176 | }HAL_SD_CardStatusTypedef; |
| Kojto | 93:e188a91d3eaa | 177 | |
| Kojto | 93:e188a91d3eaa | 178 | /** |
| Kojto | 93:e188a91d3eaa | 179 | * @brief SD Card information structure |
| Kojto | 93:e188a91d3eaa | 180 | */ |
| Kojto | 93:e188a91d3eaa | 181 | typedef struct |
| Kojto | 93:e188a91d3eaa | 182 | { |
| Kojto | 93:e188a91d3eaa | 183 | HAL_SD_CSDTypedef SD_csd; /*!< SD card specific data register */ |
| Kojto | 93:e188a91d3eaa | 184 | HAL_SD_CIDTypedef SD_cid; /*!< SD card identification number register */ |
| Kojto | 93:e188a91d3eaa | 185 | uint64_t CardCapacity; /*!< Card capacity */ |
| Kojto | 93:e188a91d3eaa | 186 | uint32_t CardBlockSize; /*!< Card block size */ |
| Kojto | 93:e188a91d3eaa | 187 | uint16_t RCA; /*!< SD relative card address */ |
| Kojto | 93:e188a91d3eaa | 188 | uint8_t CardType; /*!< SD card type */ |
| Kojto | 93:e188a91d3eaa | 189 | |
| Kojto | 93:e188a91d3eaa | 190 | }HAL_SD_CardInfoTypedef; |
| Kojto | 93:e188a91d3eaa | 191 | |
| Kojto | 93:e188a91d3eaa | 192 | /** |
| Kojto | 93:e188a91d3eaa | 193 | * @brief SD Error status enumeration Structure definition |
| Kojto | 93:e188a91d3eaa | 194 | */ |
| Kojto | 93:e188a91d3eaa | 195 | typedef enum |
| Kojto | 93:e188a91d3eaa | 196 | { |
| Kojto | 93:e188a91d3eaa | 197 | /** |
| Kojto | 93:e188a91d3eaa | 198 | * @brief SD specific error defines |
| Kojto | 93:e188a91d3eaa | 199 | */ |
| Kojto | 93:e188a91d3eaa | 200 | SD_CMD_CRC_FAIL = (1), /*!< Command response received (but CRC check failed) */ |
| Kojto | 93:e188a91d3eaa | 201 | SD_DATA_CRC_FAIL = (2), /*!< Data block sent/received (CRC check failed) */ |
| Kojto | 93:e188a91d3eaa | 202 | SD_CMD_RSP_TIMEOUT = (3), /*!< Command response timeout */ |
| Kojto | 93:e188a91d3eaa | 203 | SD_DATA_TIMEOUT = (4), /*!< Data timeout */ |
| Kojto | 93:e188a91d3eaa | 204 | SD_TX_UNDERRUN = (5), /*!< Transmit FIFO underrun */ |
| Kojto | 93:e188a91d3eaa | 205 | SD_RX_OVERRUN = (6), /*!< Receive FIFO overrun */ |
| Kojto | 93:e188a91d3eaa | 206 | SD_START_BIT_ERR = (7), /*!< Start bit not detected on all data signals in wide bus mode */ |
| Kojto | 93:e188a91d3eaa | 207 | SD_CMD_OUT_OF_RANGE = (8), /*!< Command's argument was out of range. */ |
| Kojto | 93:e188a91d3eaa | 208 | SD_ADDR_MISALIGNED = (9), /*!< Misaligned address */ |
| Kojto | 93:e188a91d3eaa | 209 | SD_BLOCK_LEN_ERR = (10), /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */ |
| Kojto | 93:e188a91d3eaa | 210 | SD_ERASE_SEQ_ERR = (11), /*!< An error in the sequence of erase command occurs. */ |
| Kojto | 93:e188a91d3eaa | 211 | SD_BAD_ERASE_PARAM = (12), /*!< An invalid selection for erase groups */ |
| Kojto | 93:e188a91d3eaa | 212 | SD_WRITE_PROT_VIOLATION = (13), /*!< Attempt to program a write protect block */ |
| Kojto | 93:e188a91d3eaa | 213 | SD_LOCK_UNLOCK_FAILED = (14), /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */ |
| Kojto | 93:e188a91d3eaa | 214 | SD_COM_CRC_FAILED = (15), /*!< CRC check of the previous command failed */ |
| Kojto | 93:e188a91d3eaa | 215 | SD_ILLEGAL_CMD = (16), /*!< Command is not legal for the card state */ |
| Kojto | 93:e188a91d3eaa | 216 | SD_CARD_ECC_FAILED = (17), /*!< Card internal ECC was applied but failed to correct the data */ |
| Kojto | 93:e188a91d3eaa | 217 | SD_CC_ERROR = (18), /*!< Internal card controller error */ |
| Kojto | 93:e188a91d3eaa | 218 | SD_GENERAL_UNKNOWN_ERROR = (19), /*!< General or unknown error */ |
| Kojto | 93:e188a91d3eaa | 219 | SD_STREAM_READ_UNDERRUN = (20), /*!< The card could not sustain data transfer in stream read operation. */ |
| Kojto | 93:e188a91d3eaa | 220 | SD_STREAM_WRITE_OVERRUN = (21), /*!< The card could not sustain data programming in stream mode */ |
| Kojto | 93:e188a91d3eaa | 221 | SD_CID_CSD_OVERWRITE = (22), /*!< CID/CSD overwrite error */ |
| Kojto | 93:e188a91d3eaa | 222 | SD_WP_ERASE_SKIP = (23), /*!< Only partial address space was erased */ |
| Kojto | 93:e188a91d3eaa | 223 | SD_CARD_ECC_DISABLED = (24), /*!< Command has been executed without using internal ECC */ |
| Kojto | 93:e188a91d3eaa | 224 | SD_ERASE_RESET = (25), /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */ |
| Kojto | 93:e188a91d3eaa | 225 | SD_AKE_SEQ_ERROR = (26), /*!< Error in sequence of authentication. */ |
| Kojto | 93:e188a91d3eaa | 226 | SD_INVALID_VOLTRANGE = (27), |
| Kojto | 93:e188a91d3eaa | 227 | SD_ADDR_OUT_OF_RANGE = (28), |
| Kojto | 93:e188a91d3eaa | 228 | SD_SWITCH_ERROR = (29), |
| Kojto | 93:e188a91d3eaa | 229 | SD_SDIO_DISABLED = (30), |
| Kojto | 93:e188a91d3eaa | 230 | SD_SDIO_FUNCTION_BUSY = (31), |
| Kojto | 93:e188a91d3eaa | 231 | SD_SDIO_FUNCTION_FAILED = (32), |
| Kojto | 93:e188a91d3eaa | 232 | SD_SDIO_UNKNOWN_FUNCTION = (33), |
| Kojto | 93:e188a91d3eaa | 233 | |
| Kojto | 93:e188a91d3eaa | 234 | /** |
| Kojto | 93:e188a91d3eaa | 235 | * @brief Standard error defines |
| Kojto | 93:e188a91d3eaa | 236 | */ |
| Kojto | 93:e188a91d3eaa | 237 | SD_INTERNAL_ERROR = (34), |
| Kojto | 93:e188a91d3eaa | 238 | SD_NOT_CONFIGURED = (35), |
| Kojto | 93:e188a91d3eaa | 239 | SD_REQUEST_PENDING = (36), |
| Kojto | 93:e188a91d3eaa | 240 | SD_REQUEST_NOT_APPLICABLE = (37), |
| Kojto | 93:e188a91d3eaa | 241 | SD_INVALID_PARAMETER = (38), |
| Kojto | 93:e188a91d3eaa | 242 | SD_UNSUPPORTED_FEATURE = (39), |
| Kojto | 93:e188a91d3eaa | 243 | SD_UNSUPPORTED_HW = (40), |
| Kojto | 93:e188a91d3eaa | 244 | SD_ERROR = (41), |
| Kojto | 93:e188a91d3eaa | 245 | SD_OK = (0) |
| Kojto | 93:e188a91d3eaa | 246 | |
| Kojto | 93:e188a91d3eaa | 247 | }HAL_SD_ErrorTypedef; |
| Kojto | 93:e188a91d3eaa | 248 | |
| Kojto | 93:e188a91d3eaa | 249 | /** |
| Kojto | 93:e188a91d3eaa | 250 | * @brief SD Transfer state enumeration structure |
| Kojto | 93:e188a91d3eaa | 251 | */ |
| Kojto | 93:e188a91d3eaa | 252 | typedef enum |
| Kojto | 93:e188a91d3eaa | 253 | { |
| Kojto | 93:e188a91d3eaa | 254 | SD_TRANSFER_OK = 0, /*!< Transfer success */ |
| Kojto | 93:e188a91d3eaa | 255 | SD_TRANSFER_BUSY = 1, /*!< Transfer is occurring */ |
| Kojto | 93:e188a91d3eaa | 256 | SD_TRANSFER_ERROR = 2 /*!< Transfer failed */ |
| Kojto | 93:e188a91d3eaa | 257 | |
| Kojto | 93:e188a91d3eaa | 258 | }HAL_SD_TransferStateTypedef; |
| Kojto | 93:e188a91d3eaa | 259 | |
| Kojto | 93:e188a91d3eaa | 260 | /** |
| Kojto | 93:e188a91d3eaa | 261 | * @brief SD Card State enumeration structure |
| Kojto | 93:e188a91d3eaa | 262 | */ |
| Kojto | 93:e188a91d3eaa | 263 | typedef enum |
| Kojto | 93:e188a91d3eaa | 264 | { |
| Kojto | 93:e188a91d3eaa | 265 | SD_CARD_READY = ((uint32_t)0x00000001), /*!< Card state is ready */ |
| Kojto | 93:e188a91d3eaa | 266 | SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002), /*!< Card is in identification state */ |
| Kojto | 93:e188a91d3eaa | 267 | SD_CARD_STANDBY = ((uint32_t)0x00000003), /*!< Card is in standby state */ |
| Kojto | 93:e188a91d3eaa | 268 | SD_CARD_TRANSFER = ((uint32_t)0x00000004), /*!< Card is in transfer state */ |
| Kojto | 93:e188a91d3eaa | 269 | SD_CARD_SENDING = ((uint32_t)0x00000005), /*!< Card is sending an operation */ |
| Kojto | 93:e188a91d3eaa | 270 | SD_CARD_RECEIVING = ((uint32_t)0x00000006), /*!< Card is receiving operation information */ |
| Kojto | 93:e188a91d3eaa | 271 | SD_CARD_PROGRAMMING = ((uint32_t)0x00000007), /*!< Card is in programming state */ |
| Kojto | 93:e188a91d3eaa | 272 | SD_CARD_DISCONNECTED = ((uint32_t)0x00000008), /*!< Card is disconnected */ |
| Kojto | 93:e188a91d3eaa | 273 | SD_CARD_ERROR = ((uint32_t)0x000000FF) /*!< Card is in error state */ |
| Kojto | 93:e188a91d3eaa | 274 | |
| Kojto | 93:e188a91d3eaa | 275 | }HAL_SD_CardStateTypedef; |
| Kojto | 93:e188a91d3eaa | 276 | |
| Kojto | 93:e188a91d3eaa | 277 | /** |
| Kojto | 93:e188a91d3eaa | 278 | * @brief SD Operation enumeration structure |
| Kojto | 93:e188a91d3eaa | 279 | */ |
| Kojto | 93:e188a91d3eaa | 280 | typedef enum |
| Kojto | 93:e188a91d3eaa | 281 | { |
| Kojto | 93:e188a91d3eaa | 282 | SD_READ_SINGLE_BLOCK = 0, /*!< Read single block operation */ |
| Kojto | 93:e188a91d3eaa | 283 | SD_READ_MULTIPLE_BLOCK = 1, /*!< Read multiple blocks operation */ |
| Kojto | 93:e188a91d3eaa | 284 | SD_WRITE_SINGLE_BLOCK = 2, /*!< Write single block operation */ |
| Kojto | 93:e188a91d3eaa | 285 | SD_WRITE_MULTIPLE_BLOCK = 3 /*!< Write multiple blocks operation */ |
| Kojto | 93:e188a91d3eaa | 286 | |
| Kojto | 93:e188a91d3eaa | 287 | }HAL_SD_OperationTypedef; |
| Kojto | 93:e188a91d3eaa | 288 | |
| Kojto | 93:e188a91d3eaa | 289 | |
| Kojto | 93:e188a91d3eaa | 290 | /* Exported constants --------------------------------------------------------*/ |
| Kojto | 93:e188a91d3eaa | 291 | /** @defgroup SD_Exported_Constants |
| Kojto | 93:e188a91d3eaa | 292 | * @{ |
| Kojto | 93:e188a91d3eaa | 293 | */ |
| Kojto | 93:e188a91d3eaa | 294 | |
| Kojto | 93:e188a91d3eaa | 295 | /** |
| Kojto | 93:e188a91d3eaa | 296 | * @brief SD Commands Index |
| Kojto | 93:e188a91d3eaa | 297 | */ |
| Kojto | 93:e188a91d3eaa | 298 | #define SD_CMD_GO_IDLE_STATE ((uint8_t)0) /*!< Resets the SD memory card. */ |
| Kojto | 93:e188a91d3eaa | 299 | #define SD_CMD_SEND_OP_COND ((uint8_t)1) /*!< Sends host capacity support information and activates the card's initialization process. */ |
| Kojto | 93:e188a91d3eaa | 300 | #define SD_CMD_ALL_SEND_CID ((uint8_t)2) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */ |
| Kojto | 93:e188a91d3eaa | 301 | #define SD_CMD_SET_REL_ADDR ((uint8_t)3) /*!< Asks the card to publish a new relative address (RCA). */ |
| Kojto | 93:e188a91d3eaa | 302 | #define SD_CMD_SET_DSR ((uint8_t)4) /*!< Programs the DSR of all cards. */ |
| Kojto | 93:e188a91d3eaa | 303 | #define SD_CMD_SDIO_SEN_OP_COND ((uint8_t)5) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its |
| Kojto | 93:e188a91d3eaa | 304 | operating condition register (OCR) content in the response on the CMD line. */ |
| Kojto | 93:e188a91d3eaa | 305 | #define SD_CMD_HS_SWITCH ((uint8_t)6) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */ |
| Kojto | 93:e188a91d3eaa | 306 | #define SD_CMD_SEL_DESEL_CARD ((uint8_t)7) /*!< Selects the card by its own relative address and gets deselected by any other address */ |
| Kojto | 93:e188a91d3eaa | 307 | #define SD_CMD_HS_SEND_EXT_CSD ((uint8_t)8) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information |
| Kojto | 93:e188a91d3eaa | 308 | and asks the card whether card supports voltage. */ |
| Kojto | 93:e188a91d3eaa | 309 | #define SD_CMD_SEND_CSD ((uint8_t)9) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */ |
| Kojto | 93:e188a91d3eaa | 310 | #define SD_CMD_SEND_CID ((uint8_t)10) /*!< Addressed card sends its card identification (CID) on the CMD line. */ |
| Kojto | 93:e188a91d3eaa | 311 | #define SD_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD card doesn't support it. */ |
| Kojto | 93:e188a91d3eaa | 312 | #define SD_CMD_STOP_TRANSMISSION ((uint8_t)12) /*!< Forces the card to stop transmission. */ |
| Kojto | 93:e188a91d3eaa | 313 | #define SD_CMD_SEND_STATUS ((uint8_t)13) /*!< Addressed card sends its status register. */ |
| Kojto | 93:e188a91d3eaa | 314 | #define SD_CMD_HS_BUSTEST_READ ((uint8_t)14) |
| Kojto | 93:e188a91d3eaa | 315 | #define SD_CMD_GO_INACTIVE_STATE ((uint8_t)15) /*!< Sends an addressed card into the inactive state. */ |
| Kojto | 93:e188a91d3eaa | 316 | #define SD_CMD_SET_BLOCKLEN ((uint8_t)16) /*!< Sets the block length (in bytes for SDSC) for all following block commands |
| Kojto | 93:e188a91d3eaa | 317 | (read, write, lock). Default block length is fixed to 512 Bytes. Not effective |
| Kojto | 93:e188a91d3eaa | 318 | for SDHS and SDXC. */ |
| Kojto | 93:e188a91d3eaa | 319 | #define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of |
| Kojto | 93:e188a91d3eaa | 320 | fixed 512 bytes in case of SDHC and SDXC. */ |
| Kojto | 93:e188a91d3eaa | 321 | #define SD_CMD_READ_MULT_BLOCK ((uint8_t)18) /*!< Continuously transfers data blocks from card to host until interrupted by |
| Kojto | 93:e188a91d3eaa | 322 | STOP_TRANSMISSION command. */ |
| Kojto | 93:e188a91d3eaa | 323 | #define SD_CMD_HS_BUSTEST_WRITE ((uint8_t)19) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */ |
| Kojto | 93:e188a91d3eaa | 324 | #define SD_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< Speed class control command. */ |
| Kojto | 93:e188a91d3eaa | 325 | #define SD_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< Specify block count for CMD18 and CMD25. */ |
| Kojto | 93:e188a91d3eaa | 326 | #define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of |
| Kojto | 93:e188a91d3eaa | 327 | fixed 512 bytes in case of SDHC and SDXC. */ |
| Kojto | 93:e188a91d3eaa | 328 | #define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */ |
| Kojto | 93:e188a91d3eaa | 329 | #define SD_CMD_PROG_CID ((uint8_t)26) /*!< Reserved for manufacturers. */ |
| Kojto | 93:e188a91d3eaa | 330 | #define SD_CMD_PROG_CSD ((uint8_t)27) /*!< Programming of the programmable bits of the CSD. */ |
| Kojto | 93:e188a91d3eaa | 331 | #define SD_CMD_SET_WRITE_PROT ((uint8_t)28) /*!< Sets the write protection bit of the addressed group. */ |
| Kojto | 93:e188a91d3eaa | 332 | #define SD_CMD_CLR_WRITE_PROT ((uint8_t)29) /*!< Clears the write protection bit of the addressed group. */ |
| Kojto | 93:e188a91d3eaa | 333 | #define SD_CMD_SEND_WRITE_PROT ((uint8_t)30) /*!< Asks the card to send the status of the write protection bits. */ |
| Kojto | 93:e188a91d3eaa | 334 | #define SD_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< Sets the address of the first write block to be erased. (For SD card only). */ |
| Kojto | 93:e188a91d3eaa | 335 | #define SD_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< Sets the address of the last write block of the continuous range to be erased. */ |
| Kojto | 93:e188a91d3eaa | 336 | #define SD_CMD_ERASE_GRP_START ((uint8_t)35) /*!< Sets the address of the first write block to be erased. Reserved for each command |
| Kojto | 93:e188a91d3eaa | 337 | system set by switch function command (CMD6). */ |
| Kojto | 93:e188a91d3eaa | 338 | #define SD_CMD_ERASE_GRP_END ((uint8_t)36) /*!< Sets the address of the last write block of the continuous range to be erased. |
| Kojto | 93:e188a91d3eaa | 339 | Reserved for each command system set by switch function command (CMD6). */ |
| Kojto | 93:e188a91d3eaa | 340 | #define SD_CMD_ERASE ((uint8_t)38) /*!< Reserved for SD security applications. */ |
| Kojto | 93:e188a91d3eaa | 341 | #define SD_CMD_FAST_IO ((uint8_t)39) /*!< SD card doesn't support it (Reserved). */ |
| Kojto | 93:e188a91d3eaa | 342 | #define SD_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD card doesn't support it (Reserved). */ |
| Kojto | 93:e188a91d3eaa | 343 | #define SD_CMD_LOCK_UNLOCK ((uint8_t)42) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by |
| Kojto | 93:e188a91d3eaa | 344 | the SET_BLOCK_LEN command. */ |
| Kojto | 93:e188a91d3eaa | 345 | #define SD_CMD_APP_CMD ((uint8_t)55) /*!< Indicates to the card that the next command is an application specific command rather |
| Kojto | 93:e188a91d3eaa | 346 | than a standard command. */ |
| Kojto | 93:e188a91d3eaa | 347 | #define SD_CMD_GEN_CMD ((uint8_t)56) /*!< Used either to transfer a data block to the card or to get a data block from the card |
| Kojto | 93:e188a91d3eaa | 348 | for general purpose/application specific commands. */ |
| Kojto | 93:e188a91d3eaa | 349 | #define SD_CMD_NO_CMD ((uint8_t)64) |
| Kojto | 93:e188a91d3eaa | 350 | |
| Kojto | 93:e188a91d3eaa | 351 | /** |
| Kojto | 93:e188a91d3eaa | 352 | * @brief Following commands are SD Card Specific commands. |
| Kojto | 93:e188a91d3eaa | 353 | * SDIO_APP_CMD should be sent before sending these commands. |
| Kojto | 93:e188a91d3eaa | 354 | */ |
| Kojto | 93:e188a91d3eaa | 355 | #define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus |
| Kojto | 93:e188a91d3eaa | 356 | widths are given in SCR register. */ |
| Kojto | 93:e188a91d3eaa | 357 | #define SD_CMD_SD_APP_STAUS ((uint8_t)13) /*!< (ACMD13) Sends the SD status. */ |
| Kojto | 93:e188a91d3eaa | 358 | #define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with |
| Kojto | 93:e188a91d3eaa | 359 | 32bit+CRC data block. */ |
| Kojto | 93:e188a91d3eaa | 360 | #define SD_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to |
| Kojto | 93:e188a91d3eaa | 361 | send its operating condition register (OCR) content in the response on the CMD line. */ |
| Kojto | 93:e188a91d3eaa | 362 | #define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< (ACMD42) Connects/Disconnects the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card. */ |
| Kojto | 93:e188a91d3eaa | 363 | #define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< Reads the SD Configuration Register (SCR). */ |
| Kojto | 93:e188a91d3eaa | 364 | #define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52) /*!< For SD I/O card only, reserved for security specification. */ |
| Kojto | 93:e188a91d3eaa | 365 | #define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O card only, reserved for security specification. */ |
| Kojto | 93:e188a91d3eaa | 366 | |
| Kojto | 93:e188a91d3eaa | 367 | /** |
| Kojto | 93:e188a91d3eaa | 368 | * @brief Following commands are SD Card Specific security commands. |
| Kojto | 93:e188a91d3eaa | 369 | * SD_CMD_APP_CMD should be sent before sending these commands. |
| Kojto | 93:e188a91d3eaa | 370 | */ |
| Kojto | 93:e188a91d3eaa | 371 | #define SD_CMD_SD_APP_GET_MKB ((uint8_t)43) /*!< For SD card only */ |
| Kojto | 93:e188a91d3eaa | 372 | #define SD_CMD_SD_APP_GET_MID ((uint8_t)44) /*!< For SD card only */ |
| Kojto | 93:e188a91d3eaa | 373 | #define SD_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) /*!< For SD card only */ |
| Kojto | 93:e188a91d3eaa | 374 | #define SD_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) /*!< For SD card only */ |
| Kojto | 93:e188a91d3eaa | 375 | #define SD_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) /*!< For SD card only */ |
| Kojto | 93:e188a91d3eaa | 376 | #define SD_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) /*!< For SD card only */ |
| Kojto | 93:e188a91d3eaa | 377 | #define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) /*!< For SD card only */ |
| Kojto | 93:e188a91d3eaa | 378 | #define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) /*!< For SD card only */ |
| Kojto | 93:e188a91d3eaa | 379 | #define SD_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) /*!< For SD card only */ |
| Kojto | 93:e188a91d3eaa | 380 | #define SD_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) /*!< For SD card only */ |
| Kojto | 93:e188a91d3eaa | 381 | #define SD_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /*!< For SD card only */ |
| Kojto | 93:e188a91d3eaa | 382 | |
| Kojto | 93:e188a91d3eaa | 383 | /** |
| Kojto | 93:e188a91d3eaa | 384 | * @brief Supported SD Memory Cards |
| Kojto | 93:e188a91d3eaa | 385 | */ |
| Kojto | 93:e188a91d3eaa | 386 | #define STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000) |
| Kojto | 93:e188a91d3eaa | 387 | #define STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001) |
| Kojto | 93:e188a91d3eaa | 388 | #define HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002) |
| Kojto | 93:e188a91d3eaa | 389 | #define MULTIMEDIA_CARD ((uint32_t)0x00000003) |
| Kojto | 93:e188a91d3eaa | 390 | #define SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004) |
| Kojto | 93:e188a91d3eaa | 391 | #define HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005) |
| Kojto | 93:e188a91d3eaa | 392 | #define SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006) |
| Kojto | 93:e188a91d3eaa | 393 | #define HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007) |
| Kojto | 93:e188a91d3eaa | 394 | /** |
| Kojto | 93:e188a91d3eaa | 395 | * @} |
| Kojto | 93:e188a91d3eaa | 396 | */ |
| Kojto | 93:e188a91d3eaa | 397 | |
| Kojto | 93:e188a91d3eaa | 398 | /* Exported macro ------------------------------------------------------------*/ |
| Kojto | 93:e188a91d3eaa | 399 | |
| Kojto | 93:e188a91d3eaa | 400 | /** @defgroup SD_Exported_macros |
| Kojto | 93:e188a91d3eaa | 401 | * @brief macros to handle interrupts and specific clock configurations |
| Kojto | 93:e188a91d3eaa | 402 | * @{ |
| Kojto | 93:e188a91d3eaa | 403 | */ |
| Kojto | 93:e188a91d3eaa | 404 | |
| Kojto | 93:e188a91d3eaa | 405 | /** |
| Kojto | 93:e188a91d3eaa | 406 | * @brief Enable the SD device. |
| Kojto | 93:e188a91d3eaa | 407 | * @retval None |
| Kojto | 93:e188a91d3eaa | 408 | */ |
| Kojto | 93:e188a91d3eaa | 409 | #define __HAL_SD_SDIO_ENABLE() __SDIO_ENABLE() |
| Kojto | 93:e188a91d3eaa | 410 | |
| Kojto | 93:e188a91d3eaa | 411 | /** |
| Kojto | 93:e188a91d3eaa | 412 | * @brief Disable the SD device. |
| Kojto | 93:e188a91d3eaa | 413 | * @retval None |
| Kojto | 93:e188a91d3eaa | 414 | */ |
| Kojto | 93:e188a91d3eaa | 415 | #define __HAL_SD_SDIO_DISABLE() __SDIO_DISABLE() |
| Kojto | 93:e188a91d3eaa | 416 | |
| Kojto | 93:e188a91d3eaa | 417 | /** |
| Kojto | 93:e188a91d3eaa | 418 | * @brief Enable the SDIO DMA transfer. |
| Kojto | 93:e188a91d3eaa | 419 | * @retval None |
| Kojto | 93:e188a91d3eaa | 420 | */ |
| Kojto | 93:e188a91d3eaa | 421 | #define __HAL_SD_SDIO_DMA_ENABLE() __SDIO_DMA_ENABLE() |
| Kojto | 93:e188a91d3eaa | 422 | |
| Kojto | 93:e188a91d3eaa | 423 | /** |
| Kojto | 93:e188a91d3eaa | 424 | * @brief Disable the SDIO DMA transfer. |
| Kojto | 93:e188a91d3eaa | 425 | * @retval None |
| Kojto | 93:e188a91d3eaa | 426 | */ |
| Kojto | 93:e188a91d3eaa | 427 | #define __HAL_SD_SDIO_DMA_DISABLE() __SDIO_DMA_DISABLE() |
| Kojto | 93:e188a91d3eaa | 428 | |
| Kojto | 93:e188a91d3eaa | 429 | /** |
| Kojto | 93:e188a91d3eaa | 430 | * @brief Enable the SD device interrupt. |
| Kojto | 93:e188a91d3eaa | 431 | * @param __HANDLE__: SD Handle |
| Kojto | 93:e188a91d3eaa | 432 | * @param __INTERRUPT__: specifies the SDIO interrupt sources to be enabled. |
| Kojto | 93:e188a91d3eaa | 433 | * This parameter can be one or a combination of the following values: |
| Kojto | 93:e188a91d3eaa | 434 | * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt |
| Kojto | 93:e188a91d3eaa | 435 | * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt |
| Kojto | 93:e188a91d3eaa | 436 | * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt |
| Kojto | 93:e188a91d3eaa | 437 | * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt |
| Kojto | 93:e188a91d3eaa | 438 | * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt |
| Kojto | 93:e188a91d3eaa | 439 | * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt |
| Kojto | 93:e188a91d3eaa | 440 | * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt |
| Kojto | 93:e188a91d3eaa | 441 | * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt |
| Kojto | 93:e188a91d3eaa | 442 | * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt |
| Kojto | 93:e188a91d3eaa | 443 | * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide |
| Kojto | 93:e188a91d3eaa | 444 | * bus mode interrupt |
| Kojto | 93:e188a91d3eaa | 445 | * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt |
| Kojto | 93:e188a91d3eaa | 446 | * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt |
| Kojto | 93:e188a91d3eaa | 447 | * @arg SDIO_IT_TXACT: Data transmit in progress interrupt |
| Kojto | 93:e188a91d3eaa | 448 | * @arg SDIO_IT_RXACT: Data receive in progress interrupt |
| Kojto | 93:e188a91d3eaa | 449 | * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt |
| Kojto | 93:e188a91d3eaa | 450 | * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt |
| Kojto | 93:e188a91d3eaa | 451 | * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt |
| Kojto | 93:e188a91d3eaa | 452 | * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt |
| Kojto | 93:e188a91d3eaa | 453 | * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt |
| Kojto | 93:e188a91d3eaa | 454 | * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt |
| Kojto | 93:e188a91d3eaa | 455 | * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt |
| Kojto | 93:e188a91d3eaa | 456 | * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt |
| Kojto | 93:e188a91d3eaa | 457 | * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt |
| Kojto | 93:e188a91d3eaa | 458 | * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt |
| Kojto | 93:e188a91d3eaa | 459 | * @retval None |
| Kojto | 93:e188a91d3eaa | 460 | */ |
| Kojto | 93:e188a91d3eaa | 461 | #define __HAL_SD_SDIO_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) |
| Kojto | 93:e188a91d3eaa | 462 | |
| Kojto | 93:e188a91d3eaa | 463 | /** |
| Kojto | 93:e188a91d3eaa | 464 | * @brief Disable the SD device interrupt. |
| Kojto | 93:e188a91d3eaa | 465 | * @param __HANDLE__: SD Handle |
| Kojto | 93:e188a91d3eaa | 466 | * @param __INTERRUPT__: specifies the SDIO interrupt sources to be disabled. |
| Kojto | 93:e188a91d3eaa | 467 | * This parameter can be one or a combination of the following values: |
| Kojto | 93:e188a91d3eaa | 468 | * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt |
| Kojto | 93:e188a91d3eaa | 469 | * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt |
| Kojto | 93:e188a91d3eaa | 470 | * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt |
| Kojto | 93:e188a91d3eaa | 471 | * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt |
| Kojto | 93:e188a91d3eaa | 472 | * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt |
| Kojto | 93:e188a91d3eaa | 473 | * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt |
| Kojto | 93:e188a91d3eaa | 474 | * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt |
| Kojto | 93:e188a91d3eaa | 475 | * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt |
| Kojto | 93:e188a91d3eaa | 476 | * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt |
| Kojto | 93:e188a91d3eaa | 477 | * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide |
| Kojto | 93:e188a91d3eaa | 478 | * bus mode interrupt |
| Kojto | 93:e188a91d3eaa | 479 | * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt |
| Kojto | 93:e188a91d3eaa | 480 | * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt |
| Kojto | 93:e188a91d3eaa | 481 | * @arg SDIO_IT_TXACT: Data transmit in progress interrupt |
| Kojto | 93:e188a91d3eaa | 482 | * @arg SDIO_IT_RXACT: Data receive in progress interrupt |
| Kojto | 93:e188a91d3eaa | 483 | * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt |
| Kojto | 93:e188a91d3eaa | 484 | * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt |
| Kojto | 93:e188a91d3eaa | 485 | * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt |
| Kojto | 93:e188a91d3eaa | 486 | * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt |
| Kojto | 93:e188a91d3eaa | 487 | * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt |
| Kojto | 93:e188a91d3eaa | 488 | * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt |
| Kojto | 93:e188a91d3eaa | 489 | * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt |
| Kojto | 93:e188a91d3eaa | 490 | * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt |
| Kojto | 93:e188a91d3eaa | 491 | * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt |
| Kojto | 93:e188a91d3eaa | 492 | * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt |
| Kojto | 93:e188a91d3eaa | 493 | * @retval None |
| Kojto | 93:e188a91d3eaa | 494 | */ |
| Kojto | 93:e188a91d3eaa | 495 | #define __HAL_SD_SDIO_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) |
| Kojto | 93:e188a91d3eaa | 496 | |
| Kojto | 93:e188a91d3eaa | 497 | /** |
| Kojto | 93:e188a91d3eaa | 498 | * @brief Check whether the specified SD flag is set or not. |
| Kojto | 93:e188a91d3eaa | 499 | * @param __HANDLE__: SD Handle |
| Kojto | 93:e188a91d3eaa | 500 | * @param __FLAG__: specifies the flag to check. |
| Kojto | 93:e188a91d3eaa | 501 | * This parameter can be one of the following values: |
| Kojto | 93:e188a91d3eaa | 502 | * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) |
| Kojto | 93:e188a91d3eaa | 503 | * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) |
| Kojto | 93:e188a91d3eaa | 504 | * @arg SDIO_FLAG_CTIMEOUT: Command response timeout |
| Kojto | 93:e188a91d3eaa | 505 | * @arg SDIO_FLAG_DTIMEOUT: Data timeout |
| Kojto | 93:e188a91d3eaa | 506 | * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error |
| Kojto | 93:e188a91d3eaa | 507 | * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error |
| Kojto | 93:e188a91d3eaa | 508 | * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) |
| Kojto | 93:e188a91d3eaa | 509 | * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) |
| Kojto | 93:e188a91d3eaa | 510 | * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) |
| Kojto | 93:e188a91d3eaa | 511 | * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode. |
| Kojto | 93:e188a91d3eaa | 512 | * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) |
| Kojto | 93:e188a91d3eaa | 513 | * @arg SDIO_FLAG_CMDACT: Command transfer in progress |
| Kojto | 93:e188a91d3eaa | 514 | * @arg SDIO_FLAG_TXACT: Data transmit in progress |
| Kojto | 93:e188a91d3eaa | 515 | * @arg SDIO_FLAG_RXACT: Data receive in progress |
| Kojto | 93:e188a91d3eaa | 516 | * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty |
| Kojto | 93:e188a91d3eaa | 517 | * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full |
| Kojto | 93:e188a91d3eaa | 518 | * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full |
| Kojto | 93:e188a91d3eaa | 519 | * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full |
| Kojto | 93:e188a91d3eaa | 520 | * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty |
| Kojto | 93:e188a91d3eaa | 521 | * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty |
| Kojto | 93:e188a91d3eaa | 522 | * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO |
| Kojto | 93:e188a91d3eaa | 523 | * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO |
| Kojto | 93:e188a91d3eaa | 524 | * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received |
| Kojto | 93:e188a91d3eaa | 525 | * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 |
| Kojto | 93:e188a91d3eaa | 526 | * @retval The new state of SD FLAG (SET or RESET). |
| Kojto | 93:e188a91d3eaa | 527 | */ |
| Kojto | 93:e188a91d3eaa | 528 | #define __HAL_SD_SDIO_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) |
| Kojto | 93:e188a91d3eaa | 529 | |
| Kojto | 93:e188a91d3eaa | 530 | /** |
| Kojto | 93:e188a91d3eaa | 531 | * @brief Clear the SD's pending flags. |
| Kojto | 93:e188a91d3eaa | 532 | * @param __HANDLE__: SD Handle |
| Kojto | 93:e188a91d3eaa | 533 | * @param __FLAG__: specifies the flag to clear. |
| Kojto | 93:e188a91d3eaa | 534 | * This parameter can be one or a combination of the following values: |
| Kojto | 93:e188a91d3eaa | 535 | * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) |
| Kojto | 93:e188a91d3eaa | 536 | * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) |
| Kojto | 93:e188a91d3eaa | 537 | * @arg SDIO_FLAG_CTIMEOUT: Command response timeout |
| Kojto | 93:e188a91d3eaa | 538 | * @arg SDIO_FLAG_DTIMEOUT: Data timeout |
| Kojto | 93:e188a91d3eaa | 539 | * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error |
| Kojto | 93:e188a91d3eaa | 540 | * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error |
| Kojto | 93:e188a91d3eaa | 541 | * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) |
| Kojto | 93:e188a91d3eaa | 542 | * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) |
| Kojto | 93:e188a91d3eaa | 543 | * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) |
| Kojto | 93:e188a91d3eaa | 544 | * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode |
| Kojto | 93:e188a91d3eaa | 545 | * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) |
| Kojto | 93:e188a91d3eaa | 546 | * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received |
| Kojto | 93:e188a91d3eaa | 547 | * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 |
| Kojto | 93:e188a91d3eaa | 548 | * @retval None |
| Kojto | 93:e188a91d3eaa | 549 | */ |
| Kojto | 93:e188a91d3eaa | 550 | #define __HAL_SD_SDIO_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) |
| Kojto | 93:e188a91d3eaa | 551 | |
| Kojto | 93:e188a91d3eaa | 552 | /** |
| Kojto | 93:e188a91d3eaa | 553 | * @brief Check whether the specified SD interrupt has occurred or not. |
| Kojto | 93:e188a91d3eaa | 554 | * @param __HANDLE__: SD Handle |
| Kojto | 93:e188a91d3eaa | 555 | * @param __INTERRUPT__: specifies the SDIO interrupt source to check. |
| Kojto | 93:e188a91d3eaa | 556 | * This parameter can be one of the following values: |
| Kojto | 93:e188a91d3eaa | 557 | * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt |
| Kojto | 93:e188a91d3eaa | 558 | * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt |
| Kojto | 93:e188a91d3eaa | 559 | * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt |
| Kojto | 93:e188a91d3eaa | 560 | * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt |
| Kojto | 93:e188a91d3eaa | 561 | * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt |
| Kojto | 93:e188a91d3eaa | 562 | * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt |
| Kojto | 93:e188a91d3eaa | 563 | * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt |
| Kojto | 93:e188a91d3eaa | 564 | * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt |
| Kojto | 93:e188a91d3eaa | 565 | * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt |
| Kojto | 93:e188a91d3eaa | 566 | * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide |
| Kojto | 93:e188a91d3eaa | 567 | * bus mode interrupt |
| Kojto | 93:e188a91d3eaa | 568 | * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt |
| Kojto | 93:e188a91d3eaa | 569 | * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt |
| Kojto | 93:e188a91d3eaa | 570 | * @arg SDIO_IT_TXACT: Data transmit in progress interrupt |
| Kojto | 93:e188a91d3eaa | 571 | * @arg SDIO_IT_RXACT: Data receive in progress interrupt |
| Kojto | 93:e188a91d3eaa | 572 | * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt |
| Kojto | 93:e188a91d3eaa | 573 | * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt |
| Kojto | 93:e188a91d3eaa | 574 | * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt |
| Kojto | 93:e188a91d3eaa | 575 | * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt |
| Kojto | 93:e188a91d3eaa | 576 | * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt |
| Kojto | 93:e188a91d3eaa | 577 | * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt |
| Kojto | 93:e188a91d3eaa | 578 | * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt |
| Kojto | 93:e188a91d3eaa | 579 | * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt |
| Kojto | 93:e188a91d3eaa | 580 | * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt |
| Kojto | 93:e188a91d3eaa | 581 | * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt |
| Kojto | 93:e188a91d3eaa | 582 | * @retval The new state of SD IT (SET or RESET). |
| Kojto | 93:e188a91d3eaa | 583 | */ |
| Kojto | 93:e188a91d3eaa | 584 | #define __HAL_SD_SDIO_GET_IT (__HANDLE__, __INTERRUPT__) __SDIO_GET_IT ((__HANDLE__)->Instance, __INTERRUPT__) |
| Kojto | 93:e188a91d3eaa | 585 | |
| Kojto | 93:e188a91d3eaa | 586 | /** |
| Kojto | 93:e188a91d3eaa | 587 | * @brief Clear the SD's interrupt pending bits. |
| Kojto | 93:e188a91d3eaa | 588 | * @param __HANDLE__ : SD Handle |
| Kojto | 93:e188a91d3eaa | 589 | * @param __INTERRUPT__: specifies the interrupt pending bit to clear. |
| Kojto | 93:e188a91d3eaa | 590 | * This parameter can be one or a combination of the following values: |
| Kojto | 93:e188a91d3eaa | 591 | * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt |
| Kojto | 93:e188a91d3eaa | 592 | * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt |
| Kojto | 93:e188a91d3eaa | 593 | * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt |
| Kojto | 93:e188a91d3eaa | 594 | * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt |
| Kojto | 93:e188a91d3eaa | 595 | * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt |
| Kojto | 93:e188a91d3eaa | 596 | * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt |
| Kojto | 93:e188a91d3eaa | 597 | * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt |
| Kojto | 93:e188a91d3eaa | 598 | * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt |
| Kojto | 93:e188a91d3eaa | 599 | * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt |
| Kojto | 93:e188a91d3eaa | 600 | * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide |
| Kojto | 93:e188a91d3eaa | 601 | * bus mode interrupt |
| Kojto | 93:e188a91d3eaa | 602 | * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt |
| Kojto | 93:e188a91d3eaa | 603 | * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 |
| Kojto | 93:e188a91d3eaa | 604 | * @retval None |
| Kojto | 93:e188a91d3eaa | 605 | */ |
| Kojto | 93:e188a91d3eaa | 606 | #define __HAL_SD_SDIO_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) |
| Kojto | 93:e188a91d3eaa | 607 | /** |
| Kojto | 93:e188a91d3eaa | 608 | * @} |
| Kojto | 93:e188a91d3eaa | 609 | */ |
| Kojto | 93:e188a91d3eaa | 610 | |
| Kojto | 93:e188a91d3eaa | 611 | /* Exported functions --------------------------------------------------------*/ |
| Kojto | 93:e188a91d3eaa | 612 | /** @addtogroup SD_Exported_Functions |
| Kojto | 93:e188a91d3eaa | 613 | * @{ |
| Kojto | 93:e188a91d3eaa | 614 | */ |
| Kojto | 93:e188a91d3eaa | 615 | |
| Kojto | 93:e188a91d3eaa | 616 | /* Initialization/de-initialization functions ********************************/ |
| Kojto | 93:e188a91d3eaa | 617 | /** @addtogroup SD_Group1 |
| Kojto | 93:e188a91d3eaa | 618 | * @{ |
| Kojto | 93:e188a91d3eaa | 619 | */ |
| Kojto | 93:e188a91d3eaa | 620 | HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo); |
| Kojto | 93:e188a91d3eaa | 621 | HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd); |
| Kojto | 93:e188a91d3eaa | 622 | void HAL_SD_MspInit(SD_HandleTypeDef *hsd); |
| Kojto | 93:e188a91d3eaa | 623 | void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd); |
| Kojto | 93:e188a91d3eaa | 624 | /** |
| Kojto | 93:e188a91d3eaa | 625 | * @} |
| Kojto | 93:e188a91d3eaa | 626 | */ |
| Kojto | 93:e188a91d3eaa | 627 | |
| Kojto | 93:e188a91d3eaa | 628 | /* I/O operation functions ***************************************************/ |
| Kojto | 93:e188a91d3eaa | 629 | /** @addtogroup SD_Group2 |
| Kojto | 93:e188a91d3eaa | 630 | * @{ |
| Kojto | 93:e188a91d3eaa | 631 | */ |
| Kojto | 93:e188a91d3eaa | 632 | /* Blocking mode: Polling */ |
| Kojto | 93:e188a91d3eaa | 633 | HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); |
| Kojto | 93:e188a91d3eaa | 634 | HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); |
| Kojto | 93:e188a91d3eaa | 635 | HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr); |
| Kojto | 93:e188a91d3eaa | 636 | |
| Kojto | 93:e188a91d3eaa | 637 | /* Non-Blocking mode: Interrupt */ |
| Kojto | 93:e188a91d3eaa | 638 | void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd); |
| Kojto | 93:e188a91d3eaa | 639 | |
| Kojto | 93:e188a91d3eaa | 640 | /* Callback in non blocking modes (DMA) */ |
| Kojto | 93:e188a91d3eaa | 641 | void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma); |
| Kojto | 93:e188a91d3eaa | 642 | void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma); |
| Kojto | 93:e188a91d3eaa | 643 | void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma); |
| Kojto | 93:e188a91d3eaa | 644 | void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma); |
| Kojto | 93:e188a91d3eaa | 645 | void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd); |
| Kojto | 93:e188a91d3eaa | 646 | void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd); |
| Kojto | 93:e188a91d3eaa | 647 | |
| Kojto | 93:e188a91d3eaa | 648 | /* Non-Blocking mode: DMA */ |
| Kojto | 93:e188a91d3eaa | 649 | HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); |
| Kojto | 93:e188a91d3eaa | 650 | HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); |
| Kojto | 93:e188a91d3eaa | 651 | HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout); |
| Kojto | 93:e188a91d3eaa | 652 | HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout); |
| Kojto | 93:e188a91d3eaa | 653 | /** |
| Kojto | 93:e188a91d3eaa | 654 | * @} |
| Kojto | 93:e188a91d3eaa | 655 | */ |
| Kojto | 93:e188a91d3eaa | 656 | |
| Kojto | 93:e188a91d3eaa | 657 | /* Peripheral Control functions **********************************************/ |
| Kojto | 93:e188a91d3eaa | 658 | /** @addtogroup SD_Group3 |
| Kojto | 93:e188a91d3eaa | 659 | * @{ |
| Kojto | 93:e188a91d3eaa | 660 | */ |
| Kojto | 93:e188a91d3eaa | 661 | HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo); |
| Kojto | 93:e188a91d3eaa | 662 | HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode); |
| Kojto | 93:e188a91d3eaa | 663 | HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd); |
| Kojto | 93:e188a91d3eaa | 664 | HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd); |
| Kojto | 93:e188a91d3eaa | 665 | /** |
| Kojto | 93:e188a91d3eaa | 666 | * @} |
| Kojto | 93:e188a91d3eaa | 667 | */ |
| Kojto | 93:e188a91d3eaa | 668 | |
| Kojto | 93:e188a91d3eaa | 669 | /* Peripheral State functions ************************************************/ |
| Kojto | 93:e188a91d3eaa | 670 | /** @addtogroup SD_Group4 |
| Kojto | 93:e188a91d3eaa | 671 | * @{ |
| Kojto | 93:e188a91d3eaa | 672 | */ |
| Kojto | 93:e188a91d3eaa | 673 | HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus); |
| Kojto | 93:e188a91d3eaa | 674 | HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus); |
| Kojto | 93:e188a91d3eaa | 675 | HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd); |
| Kojto | 93:e188a91d3eaa | 676 | /** |
| Kojto | 93:e188a91d3eaa | 677 | * @} |
| Kojto | 93:e188a91d3eaa | 678 | */ |
| Kojto | 93:e188a91d3eaa | 679 | |
| Kojto | 93:e188a91d3eaa | 680 | /** |
| Kojto | 93:e188a91d3eaa | 681 | * @} |
| Kojto | 93:e188a91d3eaa | 682 | */ |
| Kojto | 93:e188a91d3eaa | 683 | |
| Kojto | 93:e188a91d3eaa | 684 | /** |
| Kojto | 93:e188a91d3eaa | 685 | * @} |
| Kojto | 93:e188a91d3eaa | 686 | */ |
| Kojto | 93:e188a91d3eaa | 687 | |
| Kojto | 93:e188a91d3eaa | 688 | /** |
| Kojto | 93:e188a91d3eaa | 689 | * @} |
| Kojto | 93:e188a91d3eaa | 690 | */ |
| Kojto | 93:e188a91d3eaa | 691 | |
| Kojto | 93:e188a91d3eaa | 692 | #ifdef __cplusplus |
| Kojto | 93:e188a91d3eaa | 693 | } |
| Kojto | 93:e188a91d3eaa | 694 | #endif |
| Kojto | 93:e188a91d3eaa | 695 | |
| Kojto | 93:e188a91d3eaa | 696 | |
| Kojto | 93:e188a91d3eaa | 697 | #endif /* __STM32F4xx_HAL_SD_H */ |
| Kojto | 93:e188a91d3eaa | 698 | |
| Kojto | 93:e188a91d3eaa | 699 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |