Output the audio signal with filtering by graphic equalizer in the *.wav file on the SD card using onboard CODEC. SD カードの *.wav ファイルのオーディオ信号をグラフィック・イコライザを通して,ボードに搭載されているCODEC で出力する.

Dependencies:   F746_GUI F746_SAI_IO SD_PlayerSkeleton FrequencyResponseDrawer

mbed_src_STM32F7/common/BusIn.cpp

Committer:
MikamiUitOpen
Date:
2017-04-10
Revision:
24:f78f9d0ac262
Parent:
16:cbb726ac20d8

File content as of revision 24:f78f9d0ac262:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "BusIn.h"
#include "mbed_assert.h"

namespace mbed {

BusIn::BusIn(PinName p0, PinName p1, PinName p2, PinName p3, PinName p4, PinName p5, PinName p6, PinName p7, PinName p8, PinName p9, PinName p10, PinName p11, PinName p12, PinName p13, PinName p14, PinName p15) {
    PinName pins[16] = {p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14, p15};

    _nc_mask = 0;
    for (int i=0; i<16; i++) {
        _pin[i] = (pins[i] != NC) ? new DigitalIn(pins[i]) : 0;
        if (pins[i] != NC) {
            _nc_mask |= (1 << i);
        }
    }
}

BusIn::BusIn(PinName pins[16]) {
    _nc_mask = 0;
    for (int i=0; i<16; i++) {
        _pin[i] = (pins[i] != NC) ? new DigitalIn(pins[i]) : 0;
        if (pins[i] != NC) {
            _nc_mask |= (1 << i);
        }
    }
}

BusIn::~BusIn() {
    for (int i=0; i<16; i++) {
        if (_pin[i] != 0) {
            delete _pin[i];
        }
    }
}

int BusIn::read() {
    int v = 0;
    for (int i=0; i<16; i++) {
        if (_pin[i] != 0) {
            v |= _pin[i]->read() << i;
        }
    }
    return v;
}

void BusIn::mode(PinMode pull) {
    for (int i=0; i<16; i++) {
        if (_pin[i] != 0) {
            _pin[i]->mode(pull);
        }
    }
}

#ifdef MBED_OPERATORS
BusIn::operator int() {
    return read();
}

DigitalIn& BusIn::operator[] (int index) {
    MBED_ASSERT(index >= 0 && index <= 16);
    MBED_ASSERT(_pin[index]);
    return *_pin[index];
}

#endif

} // namespace mbed