Matteus Car / pulga-lorawan-drv

GPIO retrabalhada e PABOOST selecionavel

SX126X/mbed_lib.json@6:f0616e516844, 2021-05-20 (annotated)

Committer:
MatteusCarr
Date:
Thu May 20 21:24:36 2021 +0000
Revision:
6:f0616e516844
Parent:
0:561d07a737bc 
Atualizacao SX1272 LoRaRadio, retrabalho e PABOOST

Who changed what in which revision?

UserRevisionLine numberNew contents of line
brunnobbco 0:561d07a737bc 1 {
brunnobbco 0:561d07a737bc 2 "name": "SX126X-lora-driver",
brunnobbco 0:561d07a737bc 3 "config": {
brunnobbco 0:561d07a737bc 4 "spi-frequency": {
brunnobbco 0:561d07a737bc 5 "help": "SPI frequency, Default: 16 MHz",
brunnobbco 0:561d07a737bc 6 "value": 16000000
brunnobbco 0:561d07a737bc 7 },
brunnobbco 0:561d07a737bc 8 "buffer-size": {
brunnobbco 0:561d07a737bc 9 "help": "Max. buffer size the radio can handle, Default: 255 B",
brunnobbco 0:561d07a737bc 10 "value": 255
brunnobbco 0:561d07a737bc 11 },
brunnobbco 0:561d07a737bc 12 "boost-rx": {
brunnobbco 0:561d07a737bc 13 "help": "Increases sensitivity at the cost of power ~2mA for around ~3dB in sensitivity 0 = disabled, 1 = enabled",
brunnobbco 0:561d07a737bc 14 "value": 0
brunnobbco 0:561d07a737bc 15 },
brunnobbco 0:561d07a737bc 16 "regulator-mode": {
brunnobbco 0:561d07a737bc 17 "help": "Default: DCDC (low power, high BOM). Alternatively, LDO = 0. Check datasheet section 5.1 for more details",
brunnobbco 0:561d07a737bc 18 "value": 1
brunnobbco 0:561d07a737bc 19 },
brunnobbco 0:561d07a737bc 20 "sleep-mode": {
brunnobbco 0:561d07a737bc 21 "help": "Default: Cold start = 1, Warm start = 0. Check SleepMode.txt",
brunnobbco 0:561d07a737bc 22 "value": 1
brunnobbco 0:561d07a737bc 23 },
brunnobbco 0:561d07a737bc 24 "standby-mode": {
brunnobbco 0:561d07a737bc 25 "help": "Default: STDBY_RC = 0, STDBY_XOSC = 1",
brunnobbco 0:561d07a737bc 26 "value": 0
brunnobbco 0:561d07a737bc 27 }
brunnobbco 0:561d07a737bc 28 }
brunnobbco 0:561d07a737bc 29 }