File content as of revision 44:7c73baf9f4c1:

/**
 * @file    ConnectorEndpoint.cpp
 * @brief   mbed CoAP Endpoint base class
 * @author  Doug Anson/Chris Paola
 * @version 1.0
 * @see
 *
 * Copyright (c) 2014
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
 
 // Lower level Network
#include "mbed-connector-interface/mbedEndpointNetwork.h"

// ConnectorEndpoint
#include "mbed-connector-interface/ConnectorEndpoint.h"

// Utils support
#include "mbed-connector-interface/Utils.h"

// Device Manager support
#include "mbed-connector-interface/DeviceManager.h"

// DEBUG
#ifndef NDEBUG
#define DEBUG_OUT(...) { printf(__VA_ARGS__); }
#else
#define DEBUG_OUT(...) /* nothing */
#endif

// our endpoint instance
static Connector::Endpoint *__endpoint = NULL;

// LWIP_INTERFACE
#if defined(MCI_LWIP_INTERFACE)
void *__network_interface = NULL;
#endif

// Connector namespace
namespace Connector {

// STATIC: Plumb the network
void Endpoint::plumbNetwork(void *device_manager,bool canActAsRouterNode) {
	if (__endpoint == NULL) {
		// initialize our endpoint instance
		DEBUG_OUT("Endpoint::plumbNetwork: initializing endpoint instance...\r\n");
		__endpoint = (Connector::Endpoint *)utils_init_endpoint(canActAsRouterNode);
	}
	
	// set the device manager
	if (device_manager != NULL) {
		// device manager has been supplied
		DEBUG_OUT("Endpoint::plumbNetwork: setting a device manager...\r\n");
		__endpoint->setDeviceManager(device_manager);
	}
	else {
		// no device manager supplied
		DEBUG_OUT("Endpoint::plumbNetwork: no device manager supplied (OK)\r\n");
	}

    // configure the endpoint now...
    DEBUG_OUT("Endpoint::plumbNetwork: configuring endpoint...\r\n");
    utils_configure_endpoint((void *)__endpoint);
    
    // plumb network
	DEBUG_OUT("Endpoint::plumbNetwork: plumbing network...\r\n");
	net_plumb_network((void *)__endpoint);
}

// STATIC: Finalize the endpoint's configuration and begin the endpoint's main even loop (static, not tied into Logger)
void Endpoint::start()
{
    // complete setup of our endpoint...
    DEBUG_OUT("Endpoint::start: building out endpoint...\r\n");
    utils_build_endpoint((void *)__endpoint);
    
    // register the endpoint
    DEBUG_OUT("Endpoint::start: completing endpoint build out..\r\n");
	net_perform_endpoint_registration(__endpoint);
}

// STATIC: Set the ConnectionStatusInterface Implementation instance
void Endpoint::setConnectionStatusInterface(ConnectionStatusInterface *csi) {
	if (__endpoint != NULL) {
		__endpoint->setConnectionStatusInterfaceImpl(csi);
	}
}

// Constructor
Endpoint::Endpoint(const Logger *logger, const Options *options)  : M2MInterfaceObserver() 
{
    this->m_logger = (Logger *)logger;
    this->m_options = (Options *)options;
    this->m_device_manager = NULL;
    this->m_connected = false;
    this->m_registered = false;
    this->m_csi = NULL;
    this->m_oim = NULL;
}

// Copy Constructor
Endpoint::Endpoint(const Endpoint &ep)
{
    this->m_logger = ep.m_logger;
    this->m_options = ep.m_options;
    this->m_interface = ep.m_interface;
    this->m_server_instance = ep.m_server_instance;
    this->m_object_list = ep.m_object_list;
    this->m_device_object = ep.m_device_object;
    this->m_device_manager = ep.m_device_manager;
    this->m_connected = ep.m_connected;
    this->m_registered = ep.m_registered;
    this->m_csi = ep.m_csi;
    this->m_oim = ep.m_oim;
}

// Destructor
Endpoint::~Endpoint() {
	if (this->m_interface != NULL)
		delete this->m_interface;
	if (this->m_server_instance != NULL)
		delete this->m_server_instance;
}

// set the device manager
void Endpoint::setDeviceManager(void *device_manager) {
	this->m_device_manager = device_manager;
}

// get the device manager
void *Endpoint::getDeviceManager(void) {
	return this->m_device_manager;
}

// router node behavior setting
void Endpoint::asRouterNode(bool canActAsRouterNode) {
	this->m_canActAsRouterNode = canActAsRouterNode;
}

// set our Options
void Endpoint::setOptions(Options *options) {
	this->m_options = options;
}

// get our Options
Options *Endpoint::getOptions() {
	return this->m_options;
}

// get our Server
M2MSecurity *Endpoint::getServer() {
	return this->m_server_instance;
}

// get our ObjectList
M2MObjectList Endpoint::getObjectList() {
	return this->m_object_list;
}

// mbed-client: create our interface
void Endpoint::create_interface() {
	// get the CoAP listening port
    uint16_t listening_port = (uint16_t)this->m_options->getConnectorPort();
    
    // randomize the port if we are using certificates...
	if (this->m_options->getServerCertificateSize() > 0) {
		// Randomizing listening port for Certificate mode connectivity
		srand(time(NULL));
		listening_port = rand() % 65535 + 12345;
	}
	
	// Binding Mode - TCP or UDP
	M2MInterface::BindingMode network_protocol = M2MInterface::UDP;
	if (this->m_options->getCoAPConnectionType() == COAP_TCP)  network_protocol = M2MInterface::TCP;
	
	// Network Type IPv4 or IPv6
	M2MInterface::NetworkStack ip_address_type = M2MInterface::LwIP_IPv4;
	if (this->m_options->getIPAddressType() == IP_ADDRESS_TYPE_IPV6) ip_address_type = M2MInterface::LwIP_IPv6;
	
	// DEBUG
	if (network_protocol == M2MInterface::TCP) this->logger()->log("Endpoint: Underlying Protocol: TCP");
	if (network_protocol == M2MInterface::UDP) this->logger()->log("Endpoint: Underlying Protocol: UDP");
	if (ip_address_type == M2MInterface::LwIP_IPv4) this->logger()->log("Endpoint: IP Address Type: IPv4");
	if (ip_address_type == M2MInterface::LwIP_IPv6) this->logger()->log("Endpoint: IP Address Type: IPv6");
	
	// Create the  M2M Interface instance
    this->m_interface = M2MInterfaceFactory::create_interface(*this,
                                              (char *)this->m_options->getEndpointNodename().c_str(),
                                              (char *)this->m_options->getEndpointType().c_str(),
                                              (int32_t)this->m_options->getLifetime(),
                                              listening_port,									// listening port
                                              (char *)this->m_options->getDomain().c_str(),
                                              network_protocol,									// CoAP over UDP or TCP...
                                              ip_address_type);									// IPv4 addressing or IPv6 addressing
                                              
#if defined (MCI_LWIP_INTERFACE)
	if (__network_interface != NULL && this->m_interface != NULL) {
		this->logger()->log("Endpoint: Morpheus: binding network...");
		this->m_interface->set_platform_network_handler(__network_interface);
	}
#endif
}

// mbed-client: create_server_instance()
M2MSecurity *Endpoint::create_server_instance()  {
        // Creates register server object with mbed device server address and other parameters
        M2MSecurity *server = M2MInterfaceFactory::create_security(M2MSecurity::M2MServer);
        if (server != NULL)  {
        	const String url = this->m_options->getConnectorURL();
            server->set_resource_value(M2MSecurity::M2MServerUri, url);
            server->set_resource_value(M2MSecurity::BootstrapServer, false);
            server->set_resource_value(M2MSecurity::SecurityMode, M2MSecurity::Certificate);
            server->set_resource_value(M2MSecurity::ServerPublicKey,this->m_options->getServerCertificate(),this->m_options->getServerCertificateSize());
            server->set_resource_value(M2MSecurity::PublicKey,this->m_options->getClientCertificate(),this->m_options->getClientCertificateSize());
            server->set_resource_value(M2MSecurity::Secretkey,this->m_options->getClientKey(),this->m_options->getClientKeySize());
        }
        return server;
}

// mbed-client: Callback from mbed client stack if any error is encountered
void Endpoint::error(M2MInterface::Error error) {
        switch(error){
            case M2MInterface::AlreadyExists:
                DEBUG_OUT("[ERROR:] M2MInterface::AlreadyExists");
                break;
            case M2MInterface::BootstrapFailed:
               DEBUG_OUT("[ERROR:] M2MInterface::BootstrapFailed");
                break;
            case M2MInterface::InvalidParameters:
               DEBUG_OUT("[ERROR:] M2MInterface::InvalidParameters");
                break;
            case M2MInterface::NotRegistered:
                DEBUG_OUT("[ERROR:] M2MInterface::NotRegistered");
                break;
            case M2MInterface::Timeout:
                DEBUG_OUT("[ERROR:] M2MInterface::Timeout");
                break;
            case M2MInterface::NetworkError:
                DEBUG_OUT("[ERROR:] M2MInterface::NetworkError");
                break;
            case M2MInterface::ResponseParseFailed:
                DEBUG_OUT("[ERROR:] M2MInterface::ResponseParseFailed");
                break;
            case M2MInterface::UnknownError:
               DEBUG_OUT("[ERROR:] M2MInterface::UnknownError");
                break;
            case M2MInterface::MemoryFail:
                DEBUG_OUT("[ERROR:] M2MInterface::MemoryFail");
                break;
            case M2MInterface::NotAllowed:
               DEBUG_OUT("[ERROR:] M2MInterface::NotAllowed");
                break;
            default:
                break;
        }
}

// register the endpoint
void Endpoint::register_endpoint(M2MSecurity *server_instance, M2MObjectList resources) {
    if (this->m_interface != NULL && server_instance != NULL && resources.size() > 0)  {
    	// register  endpoint
    	this->logger()->log("Registering endpoint...");
        this->m_interface->register_object(server_instance, resources);
    }
}

// re-register the endpoint
void Endpoint::re_register_endpoint() {
	if (this->m_interface != NULL)  {
		this->m_interface->update_registration(this->m_server_instance, this->m_options->getLifetime());
  	}  
}

// de-register endpoint 
void Endpoint::de_register_endpoint(void) {
	if (this->m_interface != NULL) {
		// de-register endpoint
		this->logger()->log("De-registering endpoint...");
		this->m_interface->unregister_object(NULL);		
	}
}

// object registered
void Endpoint::object_registered(M2MSecurity *security, const M2MServer &server)  {	    	           
	this->logger()->log("Endpoint registered...");
	this->m_connected = true;
	this->m_registered = true;
	
#if defined (ENDPOINT_EARLY_CONFIG_DEREG_BUTTON)
	// setup the shutdown button (if enabled for a given platform...)
    this->logger()->log("Configuring optional de-registration button...");
    net_setup_deregistration_button((void *)this);
#endif
        
	if (this->m_csi != NULL) {
		this->m_csi->object_registered((void *)this,(void *)security,(void *)&server);
	}
}

// registration updated
void Endpoint::registration_updated(M2MSecurity *security, const M2MServer &server)  {
	this->logger()->log("Endpoint re-registered...");
	this->m_connected = true;
	this->m_registered = true;
	if (this->m_csi != NULL) {
		this->m_csi->registration_updated((void *)this,(void *)security,(void *)&server);
	}
}

// object unregistered
void Endpoint::object_unregistered(M2MSecurity *server)  {
	// ready to exit
	this->logger()->log("Endpoint de-registered... Ready to exit...");
	this->m_registered = false;
	if (this->m_csi != NULL) {
		this->m_csi->object_unregistered((void *)this,(void *)server);
	}
}

// bootstrap done
void Endpoint::bootstrap_done(M2MSecurity *server) {
	this->logger()->log("Endpoint bootstrapped...");
	if (this->m_csi != NULL) {
		this->m_csi->bootstrapped((void *)this,(void *)server);
	}
}

// resource value updated
void Endpoint::value_updated(M2MBase *base, M2MBase::BaseType type) {
	// Lookup the resource and invoke process() on it...
	DynamicResource *target_res = this->lookupDynamicResource(base);
	if (target_res != NULL) {
		// DEBUG
		//this->logger()->log("Value Updated (Custom Resource)");
	
		// its a custom resource...
		target_res->process(base->operation(),type);
	}
	else {
		// DEBUG
		//this->logger()->log("Value Updated (Device Manager)");
		
		// let DeviceManager handle it
		((DeviceManager *)this->m_device_manager)->process(base,type);
	}
	
	// CSI
	if (this->m_csi != NULL) {
		this->m_csi->value_updated((void *)this,(void *)base,(int)type);
	}
}

// lookup which DynamicResource cooresponds to a given M2MBase instance...
DynamicResource *Endpoint::lookupDynamicResource(M2MBase *base) {
	const DynamicResourcesList *dynamic_resources = this->m_options->getDynamicResourceList();
    for(int i=0; i<(int)dynamic_resources->size(); ++i) {
    	M2MBase *t = (M2MBase *)dynamic_resources->at(i)->getResource();
        if (t == base) {
        	return dynamic_resources->at(i);
        }
    }	
	return NULL;
}

// build out the endpoint
void Endpoint::build_endpoint()
{	
    // initialize as an mbed-client
    this->create_interface();
   
    // Create our server instance
    this->m_server_instance = this->create_server_instance();
    
    // We now have to bind our device resources
    if (this->m_device_manager != NULL) {
    	// DEBUG
	    this->logger()->log("Endpoint::build(): plumbing the device management objects and resources...");
	    	
    	// bind the device manager
	    ((DeviceManager *)this->m_device_manager)->bind();
	    
	    // push back the Device Resources Object 
	    if (this->m_options->getDeviceResourcesObject() != NULL) {
	    	// DEBUG
	    	this->logger()->log("Endpoint::build(): plumbing device resources object...");
	    	
	    	// push back the device resources object
	    	this->m_object_list.push_back((M2MObject *)this->m_options->getDeviceResourcesObject());
	    }
	    else {
	    	// unable to plumb device manager
	    	this->logger()->log("Endpoint::build(): Unable to plumb device resources. Not installing device resource object...");
	    }
	    
	    // push back the Firmware Resources Object 
	    if (this->m_options->getFirmwareResourcesObject() != NULL) {
	    	// DEBUG
	    	this->logger()->log("Endpoint::build(): plumbing firmware resources object...");
	    	
	    	// push back the firmware resources object
	    	this->m_object_list.push_back((M2MObject *)this->m_options->getFirmwareResourcesObject());
	    }
	    else {
	    	// unable to plumb firmware manager
	    	this->logger()->log("Endpoint::build(): Unable to plumb firmware resources. Not installing firmware resource object...");
	    }
    }
    else {
    	// no device manager installed
	    this->logger()->log("Endpoint::build(): No device manager installed.");
    }
        
    // Loop through Static Resources and bind each of them...
    this->logger()->log("Endpoint::build(): adding static resources...");
    const StaticResourcesList *static_resources = this->m_options->getStaticResourceList();
    for(int i=0; i<(int)static_resources->size(); ++i) {
        this->logger()->log("Endpoint::build(): binding static resource: [%s]...",static_resources->at(i)->getFullName().c_str());
        static_resources->at(i)->bind(this);
    }

    // Loop through Dynamic Resources and bind each of them...
    this->logger()->log("Endpoint::build(): adding dynamic resources...");
    const DynamicResourcesList *dynamic_resources = this->m_options->getDynamicResourceList();
    for(int i=0; i<(int)dynamic_resources->size(); ++i) {
        this->logger()->log("Endpoint::build(): binding dynamic resource: [%s]...",dynamic_resources->at(i)->getFullName().c_str());
        dynamic_resources->at(i)->bind(this);
    }

    // Get the ObjectList from the ObjectInstanceManager...
    NamedPointerList list = this->getObjectInstanceManager()->getObjectList();
    
    // DEBUG
    this->logger()->log("Endpoint::build(): All Resources bound. Number of Objects in list: %d",list.size());
        
    // add all of the object instances we have created...
    for(int i=0;i<(int)list.size();++i) {
    	// DEBUG
    	this->logger()->log("Endpoint::build(): adding Object Instance with ObjID: %s...",list.at(i).name().c_str());
    	
    	// push back the object instance...
    	this->m_object_list.push_back((M2MObject *)(list.at(i).ptr()));
    }
}

// underlying network is connected (SET)
void Endpoint::isConnected(bool connected) {
	this->m_connected = connected;
}

// underlying network is connected (GET)
bool Endpoint::isConnected() {
     return this->m_connected;
}

// Registered with mDC/mDS
bool Endpoint::isRegistered() {
     return this->m_registered;
}

// Set the ConnectionStatusInterface
void Endpoint::setConnectionStatusInterfaceImpl(ConnectionStatusInterface *csi) {
	this->m_csi = csi;
}

// Set our ObjectInstanceManager
void Endpoint::setObjectInstanceManager(ObjectInstanceManager *oim) {
	this->m_oim = oim;
}

// Get our ObjectInstanceManager
ObjectInstanceManager *Endpoint::getObjectInstanceManager() {
	return this->m_oim;
}

// our logger
Logger *Endpoint::logger()
{
    return this->m_logger;
}

} // namespace Connector