![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
An ANT Shared Bidirectional Slave sample implementation.
see http://mbed.org/users/MRSa/notebook/bc-ant_receiver/ .
main.cpp
- Committer:
- MRSa
- Date:
- 2013-06-05
- Revision:
- 3:ce23e131fdbd
- Parent:
- 2:691ccdef6f1e
File content as of revision 3:ce23e131fdbd:
#include "mbed.h" #include "bc_ant.h" /** USBTX - Tranmit on USB USBRX - receive on USB **/ Serial pc(USBTX, USBRX); /** LPC1768 LEDs **/ BusOut myLeds(LED1, LED2, LED3, LED4); /** for BC-ANT-SERIAL (LPC1768) **/ bc_ant antPort(p13, p14, p15, 9600); /** DIP-SW (for NODE SHARED ADDRESS) **/ DigitalIn dip1(p20); // DIP-SW1 DigitalIn dip2(p19); // DIP-SW2 /** OUTPUT DEVICES **/ DigitalOut led0(p21); DigitalOut led1(p22); /** ANT DEFINES **/ #define MAX_BUFSIZE 64 #define ANT_CH 0 #define DEVICE_NUMBER 65 #define ANT_NETWORK_NUMBER 0 // Network Number #define TRANS_TYPE_SHARED_2BYTES 3 // Shared Channel using 2byte address #define DEVICE_TYPE_ID 3 // Device Type ID /** DIP-SWITCH ASSIGN **/ #define ID_1 0x00001 // 1:off, 2:off #define ID_2 0x00002 // 1:on, 2:off #define ID_3 0x00004 // 1:off, 2:on #define ID_4 0x00008 // 1:on, 2:on /** * CHECK DIP-SW STATUS */ int check_DipSw() { if (dip1 == 0) { return ((dip2 == 0) ? 4 : 2); } return ((dip2 == 0) ? 3 : 1); } /** * GET LED LAMP ID */ int getLampId(int id) { int lampId = ID_1; switch (id) { case 4: lampId = ID_4; break; case 3: lampId = ID_3; break; case 2: lampId = ID_2; break; case 1: default: lampId = ID_1; break; } return (lampId); } /** * */ void executeAction(uint8_t commandType, uint8_t channel, uint8_t command) { if (commandType != 0x4e) { // do nothing! return; } // execute! if ((command & 0x40) != 0) { led0 = 1; } else { led0 = 0; } if ((command & 0x04) != 0) { led1 = 1; } else { led1 = 0; } } /** * Recieved a message from ANT port. */ void receivedFromAnt() { uint8_t receivedLength = 0; uint8_t receivedBuffer[MAX_BUFSIZE]; receivedLength = antPort.BC_ANT_RecvPacket(receivedBuffer, MAX_BUFSIZE); executeAction(receivedBuffer[2], receivedBuffer[4], receivedBuffer[6]); // Dump received message to USB printf("RX(%3d):", receivedLength); for (int index = 0; index < receivedLength; index++) { printf("%02x ", receivedBuffer[index]); } printf("\r\n"); } /** * initializes ANT port */ int initialize_ANTport() { antPort.ANT_ResetSystem(); antPort.ANT_AssignChannel(ANT_CH, ANT_Shared_Bidirectional_Slave, ANT_NETWORK_NUMBER); antPort.ANT_SetChannelId(ANT_CH, DEVICE_NUMBER, DEVICE_TYPE_ID, TRANS_TYPE_SHARED_2BYTES); antPort.ANT_SetChannelPeriod_Hz(ANT_CH, 16); // 16Hz : 32768/16 = 2048 antPort.ANT_SetChannelRFFreq(ANT_CH, 4); // 2404 MHz antPort.ANT_OpenChannel(ANT_CH); // antPort.attach(&receivedFromAnt); // callback function // set device's shared address uint8_t buffer[MAX_BUFSIZE] = { 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; buffer[0] = check_DipSw(); antPort.ANT_SendBroadcastData(ANT_CH, buffer); return (0); } /** * Main Routine */ int main() { pc.baud(9600); // set serial speed between PC and mbed. printf("--- INITIALIZE (ID:%d) ----\r\n", check_DipSw()); int statusLamp = getLampId(check_DipSw()); initialize_ANTport(); // initialize BC-ANT-SERIAL printf("--- READY ----\r\n"); while(1) { myLeds = statusLamp; wait(0.5); myLeds = 0; wait(0.5); } }