File content as of revision 0:276e7a263c35:

/*******************************************************************************
 * Copyright 2016, 2017 ARM Ltd.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *******************************************************************************/

#ifndef SOURCE_PAL_IMPL_SERVICES_API_PAL_UPDATE_H_
#define SOURCE_PAL_IMPL_SERVICES_API_PAL_UPDATE_H_

#ifndef _PAL_H
    #error "Please do not include this file directly, use pal.h instead"
#endif

#ifdef __cplusplus
extern "C" {
#endif

/*! \file pal_update.h
*  \brief PAL update.
*   This file contains the firmware update APIs and is a part of the PAL service API.
*   It provides the read/write and activation functionalities for the firmware.
*/


typedef uint32_t palImageId_t;

typedef struct _palImageHeaderDeails_t
{
    size_t imageSize;
    palBuffer_t hash;
    uint64_t version;
} palImageHeaderDeails_t;

typedef enum _palImagePlatformData_t
{
    PAL_IMAGE_DATA_FIRST = 0,
    PAL_IMAGE_DATA_HASH = PAL_IMAGE_DATA_FIRST,
    PAL_IMAGE_DATA_LAST
} palImagePlatformData_t;

typedef enum _palImageEvents_t
{
    PAL_IMAGE_EVENT_FIRST = -1,
    PAL_IMAGE_EVENT_ERROR = PAL_IMAGE_EVENT_FIRST,
    PAL_IMAGE_EVENT_INIT ,
    PAL_IMAGE_EVENT_PREPARE,
    PAL_IMAGE_EVENT_WRITE,
    PAL_IMAGE_EVENT_FINALIZE,
    PAL_IMAGE_EVENT_READTOBUFFER,
    PAL_IMAGE_EVENT_ACTIVATE,
    PAL_IMAGE_EVENT_ACTIVATE_ERROR,
    PAL_IMAGE_EVENT_GETACTIVEHASH,
    PAL_IMAGE_EVENT_GETACTIVEVERSION,
    PAL_IMAGE_EVENT_WRITEDATATOMEMORY,
    PAL_IMAGE_EVENT_LAST
} palImageEvents_t;

typedef void (*palImageSignalEvent_t)( palImageEvents_t event);

#define SIZEOF_SHA256               256/8
#define FIRMWARE_HEADER_MAGIC       0x5a51b3d4UL
#define FIRMWARE_HEADER_VERSION     1
#define ACTIVE_IMAGE_INDEX          0xFFFFFFFF

typedef struct FirmwareHeader {
    uint32_t magic;                         /** Metadata-header specific magic code. */
    uint32_t version;                       /** Revision number for this generic metadata header. */
    uint32_t checksum;                      /** A checksum of this header. This field should be considered to be zeroed out for
                                             *  the sake of computing the checksum. */
    uint32_t totalSize;                     /** Total space (in bytes) occupied by the firmware BLOB, including headers and any padding. */
    uint64_t firmwareVersion;               /** Version number for the accompanying firmware. Larger numbers imply more preferred (recent)
                                             *  versions. This defines the selection order when multiple versions are available. */
    uint8_t  firmwareSHA256[SIZEOF_SHA256]; /** A SHA-2 using a block-size of 256-bits of the firmware, including any firmware-padding. */
} FirmwareHeader_t;


typedef FirmwareHeader_t palFirmwareHeader_t;
/*! Sets the callback function that is called before the end of each API (except `imageGetDirectMemAccess`).
 *
 * WARNING: Do not change this function!
 * This function loads a callback function received from the upper layer (service).
 * The callback should be called at the end of each function (except `pal_plat_imageGetDirectMemAccess`).
 * The callback receives the event type that just occurred, defined by the ENUM `palImageEvents_t`.
 *
 * If you do not call the callback at the end, the service behaviour will be undefined.
 * The function must call `g_palUpdateServiceCBfunc` before completing an event.
 *
 * @param[in] CBfunction A pointer to the callback function.
 * \return PAL_SUCCESS(0) in case of success and a negative value indicating a specific error code in case of failure.
 */
palStatus_t pal_imageInitAPI(palImageSignalEvent_t CBfunction);


/*! Clears all the resources used by the `pal_update` APIs.
 * \return PAL_SUCCESS(0) in case of success and a negative value indicating a specific error code in case of failure.
 */
palStatus_t pal_imageDeInit(void);

/*! Prepares to write an image with an ID (`imageId`) and size (`imageSize`) in a suitable memory region. The space available is verified and reserved.
 * The function must call `g_palUpdateServiceCBfunc` before completing an event.
 * @param[in] imageId The image ID.
 * @param[in] headerDetails The size of the image.
 * \return PAL_SUCCESS(0) in case of success and a negative value indicating a specific error code in case of failure.
 */
palStatus_t pal_imagePrepare(palImageId_t imageId, palImageHeaderDeails_t* headerDetails);

/*! Writes the data to the chunk buffer with the chunk `bufferLength` in the location of `imageId` adding the relative offset.
 * The function must call `g_palUpdateServiceCBfunc` before completing an event.
 * @param[in] imageId The image ID.
 * @param[in] offset The offset to write the data into.
 * @param[in] chunk A pointer to struct containing the data and the data length to write.
 * \return PAL_SUCCESS(0) in case of success and a negative value indicating a specific error code in case of failure.
 */
palStatus_t pal_imageWrite (palImageId_t imageId, size_t offset, palConstBuffer_t *chunk);

/*! Flushes the image data and sets the version of `imageId` to `imageVersion`.
 * The function must call `g_palUpdateServiceCBfunc` before completing an event.
 * @param[in] imageId The image ID.
 * \return PAL_SUCCESS(0) in case of success and a negative value indicating a specific error code in case of failure.
 */
palStatus_t pal_imageFinalize(palImageId_t imageId);

/*! Verifies whether the image (`imageId`) is readable and sets `imagePtr` to point to the beginning of the image in the memory and `imageSizeInBytes` to the image size.
 * In case of failure, sets `imagePtr` to NULL and returns the relevant `palStatus_t` error.
 * @param[in] imageId The image ID.
 * @param[out] imagePtr A pointer to the beginning of the image.
 * @param[out] imageSizeInBytes The size of the image.
 * \return PAL_SUCCESS(0) in case of success and a negative value indicating a specific error code in case of failure.
 */
palStatus_t pal_imageGetDirectMemoryAccess(palImageId_t imageId, void** imagePtr, size_t *imageSizeInBytes);

/*! Reads the maximum of chunk (`maxBufferLength`) bytes from the image (`imageId`) with relative offset and stores it in the chunk buffer.
 * Also sets the chunk `bufferLength` value to the actual number of bytes read.
 * \note Use this API in the case image is not directly accessible via the `imageGetDirectMemAccess` function.
 *
 * The function must call `g_palUpdateServiceCBfunc` before completing an event.
 *
 * @param[in] imageId The image ID.
 * @param[in] offset The offset to start reading from.
 * @param[out] chunk A struct containing the data and actual bytes read.
 */
palStatus_t pal_imageReadToBuffer(palImageId_t imageId, size_t offset, palBuffer_t* chunk);

/*! Sets an image (`imageId`) as the active image (after the device reset).
 * The function must call `g_palUpdateServiceCBfunc` before completing an event.
 *
 * @param[in] imageId The image ID.
 */
palStatus_t pal_imageActivate(palImageId_t imageId);

/*! Retrieves the hash value of the active image to the hash buffer with the max size hash (`maxBufferLength`) and sets the hash size to hash `bufferLength`.
 * The function must call `g_palUpdateServiceCBfunc` before completing an event.
 * @param[out] hash A struct containing the hash and actual size of hash read.
 */
palStatus_t pal_imageGetActiveHash(palBuffer_t* hash);


/*! Retrieves the data value of the image header.
 * The function must call `g_palUpdateServiceCBfunc` before completing an event.
 * @param[in] imageId The image ID.
 * @param[out] headerData A struct containing the headerData and actual size of header.
 */
palStatus_t pal_imageGetFirmwareHeaderData(palImageId_t imageId, palBuffer_t *headerData);


/*! Retrieves the version of the active image to the version buffer with the size set to version `bufferLength`.
 * The function must call `g_palUpdateServiceCBfunc` before completing an event.
 * @param[out] version A struct containing the version and actual size of version read.
 */
palStatus_t pal_imageGetActiveVersion(palBuffer_t* version);

/*! Writes the data of `dataId` stored in `dataBuffer` to a memory accessible to the bootloader. Currently, only hash is available.
 * The function must call `g_palUpdateServiceCBfunc` before completing an event.
 * @param[in] dataId One of the members of the `palImagePlatformData_t` enum.
 * @param[in] dataBuffer A struct containing the data and actual bytes to be written.
 */
palStatus_t pal_imageWriteDataToMemory(palImagePlatformData_t dataId, const palConstBuffer_t* const dataBuffer);


/*! \brief This function gets the firmware working directory.
 *
 * \return full path of the firmware working folder
 */
char* pal_imageGetFolder(void);

#ifdef __cplusplus
}
#endif
#endif /* SOURCE_PAL_IMPL_SERVICES_API_PAL_UPDATE_H_ */