![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
rud2
Diff: main.cpp
- Revision:
- 0:8ed926c84e2f
- Child:
- 1:9e727d54e80c
diff -r 000000000000 -r 8ed926c84e2f main.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Wed Nov 28 14:53:46 2018 +0000 @@ -0,0 +1,109 @@ +/* + Test for manual control thread + Spektrum receiver simple test + + range on transmitter is 344-1564 + to correspond to rudder angle of 90-270 + current eqn to convert RC output is + + (IN/6.77)+39.19 + + NB: The specification for Spektrum Remote Receiver Interfacing, + rev A, 12 Apr 2016, has a note about servo position ranges: + "A full range of servo position data ranges from 0-1024 or 0-2045 depending + on the bind type. These limits are equivalent to a +/-150% travel setting + in AirWare. This full range translates to a range of 1194us which when + applied to a pwm servo signal equals 903-2097us. At +/-100% travel, the + data range is equivalent to a servo position data range of approximately + 341 to 1707 which translated to pwm equals 1102 us to 1898 us." +*/ + +#include "mbed.h" +//#include "rtos.h" +#include "Spektrum.h" +#include "unity.h" +//****RC control universal variables**** +Serial pc(USBTX, USBRX, 115200); +Spektrum rx(p13, p14); +char c; +int i; +int j; +float now; +//***Stepper Motor universal variables*** +AnalogIn ain(p18); +PwmOut motor( p22 ); +DigitalOut dir( p21 ); +DigitalOut I(p23); +DigitalOut slp(p30); //sleep +float d_ang = 180.0; +float pos = 180.0; +float RC_O; + +//**get position** +float posi(float in); + + +int main(void) +{ + + I=0; + motor.period(.001); + motor.pulsewidth(0); + // loop + while(1) { + //now = rtos::Kernel::get_ms_count(); + //***JUST ADDED stepper code + + if (rx.valid) { + RC_O = rx.channel[0]; + pc.printf(" rc: %f\n",rx.channel[0]); + } else { + pc.printf(" invalid\r\n"); + slp = 0; + } + //39.19 + d_ang = (RC_O/6.77)+39.19; + + pos = (ain-.108)/.002466; + //pc.printf(" %.3f\n",); + if((pos > (d_ang-3.0)) && (pos < (d_ang+3.0))) { + motor.pulsewidth(0); + slp = 0; + } + if( (pos > (d_ang+3.0)) && pos < 270.0) { + slp = 1; + while(pos > d_ang) { + dir = 1; //left?? + motor.pulsewidth(.0005); + pc.printf("pos: %.3f\n",pos); + pos = posi(ain); + }//while pos + motor.pulsewidth(0); + }//if pos + if((pos < (d_ang-3.0)) && pos > 90.0) { + slp = 1; + while(pos < d_ang) { + dir = 0; //right?? + motor.pulsewidth(.0005); + pc.printf("pos: %.3f\n",pos); + pos = posi(ain); + }//while pos + motor.pulsewidth(0); + } + //***END OF JUST ADDED + ThisThread::sleep_until(121); + }//while(1) +} // main() for TESTS/receiver/simple + + + +float posi(float in) +{ + float p1; + float p2; + float p3; + p1 = (ain-.108)/.002466; + p2 = (ain-.108)/.002466; + p3 = (ain-.108)/.002466; + return (p1+p2+p3)/3.0; +}