![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
bno sensor for nmea
Revision 0:b0181b1ec83e, committed 2019-03-17
- Comitter:
- LukeMar
- Date:
- Sun Mar 17 00:59:10 2019 +0000
- Commit message:
- 3/16/19
Changed in this revision
diff -r 000000000000 -r b0181b1ec83e BNO055.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/BNO055.lib Sun Mar 17 00:59:10 2019 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/StressedDave/code/BNO055/#1f722ffec323
diff -r 000000000000 -r b0181b1ec83e main.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Sun Mar 17 00:59:10 2019 +0000 @@ -0,0 +1,83 @@ +// Program to test the CAN bus using pins 29 and 30 on the mbed connected +// to an MCP2551 CAN transceiver bus IC +// Note that this program will only continue to transmit while the TX message is <= 8 bytes long + +#include "mbed.h" +#include "BNO055.h" + +#define RUDDER_ID 1 +#define BNO_ID 2 //Address of this CAN device +#define TELE_ID 3 +#define RC_ID 4 + +Serial pc(USBTX, USBRX); //tx, and rx for tera term +DigitalOut led1(LED1); //heartbeat +DigitalOut led2(LED2); //CAN read activity +DigitalOut led3(LED3); //CAN write activity +BNO055 bno(p9, p10); // (SDA, SCL) or... SDA is p28, SCL is p27 +CAN can(p30,p29); //CAN interface +Ticker pulse; +Timer tlog; +int tt = 1500; //thread delay to prevent self inflicted DOS + +void alive(void){ + led1 = !led1; + if(led1) + pulse.attach(&alive, .2); // the address of the function to be attached (flip) and the interval (2 seconds) + else + pulse.attach(&alive, 1.3); // the address of the function to be attached (flip) and the interval (2 seconds) +} + +void bno_init(void){ + if(bno.check()){ + pc.printf("BNO055 connected\r\n"); + bno.reset(); + wait(.5); + bno.setmode(OPERATION_MODE_CONFIG); + bno.SetExternalCrystal(1); + //bno.set_orientation(1); + bno.setmode(OPERATION_MODE_NDOF); //Uses magnetometer + //bno.setmode(OPERATION_MODE_NDOF_FMC_OFF); //no magnetometer + bno.set_angle_units(RADIANS); + } + else{ + pc.printf("BNO055 NOT connected\r\n Program Trap."); + while(1); + } +} + + +int main() { + char msg_send[20]; + Thread::wait(200); + + pulse.attach(&alive, 2.0); // the address of the function to be attached (alive) and the interval (2 seconds) + pc.baud(115200); + bno_init(); + can.frequency(500000); + tlog.start(); + + pc.printf("%s\r\n", __FILE__); + + while(1) { + + bno.get_angles(); + //sprintf(bnoStr, "%.2f %.2f %.2f",bno.euler.roll, bno.euler.pitch, bno.euler.yaw); + sprintf(msg_send, "s%.1f\r\n", bno.euler.pitch); //format output message string + + if(strlen(msg_send) > 8){ //if the message length exceeds 8 bytes + sprintf(msg_send, "bError"); //re-format the string as an error + } + + if(can.write(CANMessage(BNO_ID, msg_send, strlen(msg_send)))){ + pc.printf("\r\n Time: %4.3f \t Message: %s", tlog.read(), msg_send); + led2 = !led2; + //set up a random delay time of up to .79 seconds + //delayT = ((rand() % 7) * 31.0) + ((rand() % 9) * .1) + runTime.sec_total; + } + else{ + can.reset(); + } + Thread::wait(tt); + }//while(1) +}//main \ No newline at end of file
diff -r 000000000000 -r b0181b1ec83e mbed-os.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os.lib Sun Mar 17 00:59:10 2019 +0000 @@ -0,0 +1,1 @@ +https://github.com/armmbed/mbed-os/#51d55508e8400b60af467005646c4e2164738d48