KL46Z-lab2
Dependencies: SLCD- mbed TSI MMA8451Q USBDevice MAG3110
SLCD-/SLCD.cpp
- Committer:
- Lokkus
- Date:
- 2019-02-21
- Revision:
- 0:29277ae50860
File content as of revision 0:29277ae50860:
#include "SLCD.h" #include "LCDconfig.h" const uint8_t WF_ORDERING_TABLE[ ] = { CHAR1a, // LCD81 --- Pin:5 LCDnAddress=51 CHAR1b, // LCD82 --- Pin:6 LCDnAddress=52 CHAR2a, // LCD83 --- Pin:7 LCDnAddress=53 CHAR2b, // LCD84 --- Pin:8 LCDnAddress=54 CHAR3a, // LCD85 --- Pin:9 LCDnAddress=55 CHAR3b, // LCD86 --- Pin:10 LCDnAddress=56 CHAR4a, // LCD87 --- Pin:11 LCDnAddress=57 CHAR4b, // LCD88 --- Pin:12 LCDnAddress=58 CHARCOM0, // LCD77 --- Pin:1 LCDnAddress=4D CHARCOM1, // LCD78 --- Pin:2 LCDnAddress=4E CHARCOM2, // LCD79 --- Pin:3 LCDnAddress=4F CHARCOM3, // LCD80 --- Pin:4 LCDnAddress=50 }; const char ASCII_TO_WF_CODIFICATION_TABLE [ ] = { /* segA ________ | | segF | | segB | | -segG-- | | segE | | segC |________| segD */ ( SEGD+ SEGE+ SEGF+!SEGG) , ( SEGC+ SEGB+ SEGA) ,//Char = 0, offset=0 (!SEGD+!SEGE+!SEGF+!SEGG) , ( SEGC+ SEGB+!SEGA) ,//Char = 1, offset=4 ( SEGD+ SEGE+!SEGF+ SEGG) , (!SEGC+ SEGB+ SEGA) ,//Char = 2, offset=8 ( SEGD+!SEGE+!SEGF+ SEGG) , ( SEGC+ SEGB+ SEGA) ,//Char = 3, offset=12 (!SEGD+!SEGE+ SEGF+ SEGG) , ( SEGC+ SEGB+!SEGA) ,//Char = 4, offset=16 ( SEGD+!SEGE+ SEGF+ SEGG) , ( SEGC+!SEGB+ SEGA) ,//Char = 5, offset=20 ( SEGD+ SEGE+ SEGF+ SEGG) , ( SEGC+!SEGB+ SEGA) ,//Char = 6, offset=24 (!SEGD+!SEGE+!SEGF+!SEGG) , ( SEGC+ SEGB+ SEGA) ,//Char = 7, offset=28 ( SEGD+ SEGE+ SEGF+ SEGG) , ( SEGC+ SEGB+ SEGA) ,//Char = 8, offset=32 ( SEGD+!SEGE+ SEGF+ SEGG) , ( SEGC+ SEGB+ SEGA) ,//Char = 9, offset=36 (!SEGD+!SEGE+!SEGF+!SEGG) , (!SEGC+!SEGB+!SEGA) ,//Char = :, offset=40 (!SEGD+!SEGE+!SEGF+!SEGG) , (!SEGC+!SEGB+!SEGA) ,//Char = ;, offset=44 (!SEGD+!SEGE+!SEGF+!SEGG) , (!SEGC+!SEGB+!SEGA) ,//Char = <, offset=48 ( SEGD+!SEGE+!SEGF+ SEGG) , (!SEGC+!SEGB+!SEGA) ,//Char = =, offset=52 (!SEGD+!SEGE+!SEGF+!SEGG) , (!SEGC+!SEGB+!SEGA) ,//Char = >, offset=56 (!SEGD+!SEGE+!SEGF+!SEGG) , (!SEGC+!SEGB+ SEGA) ,//Char = ?, offset=60 ( SEGD+ SEGE+ SEGF+ SEGG) , ( SEGC+ SEGB+ SEGA) ,//Char = @, offset=64 (!SEGD+ SEGE+ SEGF+ SEGG) , ( SEGC+ SEGB+ SEGA) ,//Char = A, offset=68 ( SEGD+ SEGE+ SEGF+ SEGG) , ( SEGC+!SEGB+!SEGA) ,//Char = B, offset=72 ( SEGD+ SEGE+ SEGF+!SEGG) , (!SEGC+!SEGB+ SEGA) ,//Char = C, offset=76 ( SEGD+ SEGE+!SEGF+ SEGG) , ( SEGC+ SEGB+!SEGA) ,//Char = D, offset=80 ( SEGD+ SEGE+ SEGF+ SEGG) , (!SEGC+!SEGB+ SEGA) ,//Char = E, offset=84 (!SEGD+ SEGE+ SEGF+ SEGG) , (!SEGC+!SEGB+ SEGA) ,//Char = F, offset=88 ( SEGD+ SEGE+ SEGF+ SEGG) , ( SEGC+!SEGB+ SEGA) ,//Char = G, offset=92 (!SEGD+ SEGE+ SEGF+ SEGG) , ( SEGC+ SEGB+!SEGA) ,//Char = H, offset=96 (!SEGD+!SEGE+!SEGF+!SEGG) , ( SEGC+!SEGB+!SEGA) ,//Char = I, offset=100 ( SEGD+ SEGE+!SEGF+!SEGG) , ( SEGC+ SEGB+!SEGA) ,//Char = J, offset=104 (!SEGD+ SEGE+ SEGF+ SEGG) , ( SEGC+!SEGB+ SEGA) ,//Char = K, offset=108 ( SEGD+ SEGE+ SEGF+!SEGG) , (!SEGC+!SEGB+!SEGA) ,//Char = L, offset=112 (!SEGD+ SEGE+ SEGF+!SEGG) , ( SEGC+ SEGB+ SEGA) ,//Char = M, offset=116 (!SEGD+ SEGE+!SEGF+ SEGG) , ( SEGC+!SEGB+!SEGA) ,//Char = N, offset=120 ( SEGD+ SEGE+!SEGF+ SEGG) , ( SEGC+!SEGB+!SEGA) ,//Char = O, offset=124 (!SEGD+ SEGE+ SEGF+ SEGG) , (!SEGC+ SEGB+ SEGA) ,//Char = P, offset=128 ( SEGD+!SEGE+ SEGF+ SEGG) , ( SEGC+ SEGB+ SEGA) ,//Char = Q, offset=132 (!SEGD+ SEGE+!SEGF+ SEGG) , (!SEGC+!SEGB+!SEGA) ,//Char = R, offset=136 ( SEGD+!SEGE+ SEGF+ SEGG) , ( SEGC+!SEGB+ SEGA) ,//Char = S, offset=140 ( SEGD+ SEGE+ SEGF+ SEGG) , (!SEGC+!SEGB+!SEGA) ,//Char = T, offset=144 ( SEGD+ SEGE+ SEGF+!SEGG) , ( SEGC+ SEGB+!SEGA) ,//Char = U, offset=148 ( SEGD+ SEGE+!SEGF+!SEGG) , ( SEGC+!SEGB+!SEGA) ,//Char = V, offset=152 ( SEGD+ SEGE+ SEGF+!SEGG) , ( SEGC+ SEGB+!SEGA) ,//Char = W, offset=156 (!SEGD+ SEGE+ SEGF+ SEGG) , ( SEGC+ SEGB+!SEGA) ,//Char = X, offset=160 ( SEGD+!SEGE+ SEGF+ SEGG) , ( SEGC+ SEGB+!SEGA) ,//Char = Y, offset=164 ( SEGD+!SEGE+!SEGF+ SEGG) , (!SEGC+!SEGB+!SEGA) ,//Char = Z, offset=168 ( SEGD+!SEGE+!SEGF+!SEGG) , (!SEGC+!SEGB+ SEGA) ,//Char = [, offset=172 ( SEGD+!SEGE+!SEGF+!SEGG) , (!SEGC+!SEGB+ SEGA) ,//Char = \, offset=176 ( SEGD+!SEGE+!SEGF+!SEGG) , (!SEGC+!SEGB+ SEGA) ,//Char = ], offset=180 ( SEGD+!SEGE+!SEGF+!SEGG) , (!SEGC+!SEGB+ SEGA) ,//Char = ^, offset=184 ( SEGD+!SEGE+!SEGF+!SEGG) , (!SEGC+!SEGB+ SEGA) ,//Char = _, offset=188 ( SEGD+!SEGE+!SEGF+!SEGG) , (!SEGC+!SEGB+ SEGA) ,//Char = `, offset=192 (!SEGD+!SEGE+!SEGF+ SEGG) , (!SEGC+!SEGB+!SEGA) ,//Char = -, offset=196 //LG+ added '-' }; SLCD::SLCD() { init(); CharPosition = 0; } void SLCD::init() { SIM->SCGC5 |= SIM_SCGC5_SLCD_MASK | SIM_SCGC5_PORTB_MASK | SIM_SCGC5_PORTC_MASK | SIM_SCGC5_PORTD_MASK | SIM_SCGC5_PORTE_MASK; // configure pins for LCD operation PORTC->PCR[20] = 0x00000000; //VLL2 PORTC->PCR[21] = 0x00000000; //VLL1 PORTC->PCR[22] = 0x00000000; //VCAP2 PORTC->PCR[23] = 0x00000000; //VCAP1 // Enable IRCLK MCG->C1 |= MCG_C1_IRCLKEN_MASK | MCG_C1_IREFSTEN_MASK; MCG->C2 |= MCG_C2_IRCS_MASK ; //0 32KHZ internal reference clock; 1= 4MHz irc //Check if the Fast reference has its divide by 2 enabled (default): if ((MCG->SC & MCG_SC_FCRDIV_MASK) != 1<<1) error("Invalid clock configuration for SLCD\n"); LCD->GCR = 0x0; LCD->AR = 0x0; // LCD configurartion LCD->GCR = ( LCD_GCR_RVEN_MASK*_LCDRVEN | LCD_GCR_RVTRIM(_LCDRVTRIM) //0-15 | LCD_GCR_CPSEL_MASK*_LCDCPSEL | LCD_GCR_LADJ(_LCDLOADADJUST) //0-3 | LCD_GCR_VSUPPLY_MASK*_LCDSUPPLY //0-1 |!LCD_GCR_FDCIEN_MASK | LCD_GCR_ALTDIV(1) //divide by something |!LCD_GCR_LCDDOZE_MASK |!LCD_GCR_LCDSTP_MASK |!LCD_GCR_LCDEN_MASK //WILL BE ENABLE ON SUBSEQUENT STEP | LCD_GCR_SOURCE_MASK*1 | LCD_GCR_ALTSOURCE_MASK*0 | LCD_GCR_LCLK(0) //0-7 | LCD_GCR_DUTY(_LCDDUTY) //0-7 ); uint8_t i; uint32_t *p_pen; uint8_t pen_offset; // 0 or 1 uint8_t pen_bit; // 0 to 31 LCD->PEN[0] = 0x0; LCD->PEN[1] = 0x0; LCD->BPEN[0] = 0x0; LCD->BPEN[1] = 0x0; p_pen = (uint32_t *)&LCD->PEN[0]; for (i=0; i<_LCDUSEDPINS; i++) { pen_offset = WF_ORDERING_TABLE[i]/32; pen_bit = WF_ORDERING_TABLE[i]%32; p_pen[pen_offset] |= 1 << pen_bit; if (i>= _LCDFRONTPLANES) { // Pin is a backplane p_pen[pen_offset+2] |= 1 << pen_bit; // Enable BPEN LCD->WF8B[(uint8_t)WF_ORDERING_TABLE[i]] = 1 << (i - _LCDFRONTPLANES); // fill with 0x01, 0x02, etc } } LCD->GCR |= LCD_GCR_LCDEN_MASK; } int SLCD::_putc(int c) { Write_Char(c); return 0; } void SLCD::Write_Char (char lbValue) { if (CharPosition >= _CHARNUM) CharPosition = 0; if (lbValue == '.') { // Use built-in dot DP(CharPosition-1, true); return; } uint8_t char_val; uint8_t temp; uint8_t *lbpLCDWF; uint8_t lbCounter; uint16_t arrayOffset; uint8_t position; lbpLCDWF = (uint8_t *)&LCD->WF8B[0]; /* only ascii character if value not writeable write as @ */ if (lbValue>='a' && lbValue<='z') { lbValue -= 32; // UpperCase } if (lbValue<ASCCI_TABLE_START || lbValue >ASCCI_TABLE_END) { if (lbValue!='-') //LG+ lbValue = BLANK_CHARACTER; // default value as space } //if(lbValue=='-') lbValue += (-ASCCI_TABLE_START+3+(196)/4); else //LG+ if(lbValue=='-') lbValue = 196/4; else //LG+ lbValue -=ASCCI_TABLE_START; // Remove the offset to search in the ascci table arrayOffset = (lbValue * _CHAR_SIZE); // Compensate matrix offset // ensure bLCD position is in valid limit lbCounter = 0; //number of writings to complete one char while (lbCounter<_CHAR_SIZE) { position = (CharPosition) *_LCDTYPE + lbCounter; temp=0; if (lbCounter==1) { temp = lbpLCDWF[WF_ORDERING_TABLE[position]] & 0x01;//bit 0 has the special symbol information } char_val = ASCII_TO_WF_CODIFICATION_TABLE[arrayOffset + lbCounter]; lbpLCDWF[WF_ORDERING_TABLE[position]] = char_val | temp; // if (char_val==0) lbCounter = _CHAR_SIZE; //end of this character lbCounter++; } CharPosition++; } void SLCD::Home (void) { CharPosition = 0; } void SLCD::Contrast (uint8_t lbContrast) { lbContrast &= 0x0F; //Forced to the only values accepted LCD->GCR |= LCD_GCR_RVTRIM(lbContrast); } void SLCD::clear() { All_Segments(0); } void SLCD::All_Segments (int mode) { uint8_t lbTotalBytes = _CHARNUM * _LCDTYPE; uint8_t lbCounter=0; uint8_t *lbpLCDWF; lbpLCDWF = (uint8_t *)&LCD->WF8B[0]; while (lbCounter < lbTotalBytes) { if (mode==1) { lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[lbCounter++]]=_ALLON; } else { lbpLCDWF[WF_ORDERING_TABLE[lbCounter++]]=0; } } } void SLCD::DP(int pos, bool on) { uint8_t *lbpLCDWF; int tableLoc; switch (pos) { case 0: tableLoc = 1; break; case 1: tableLoc = 3; break; case 2: tableLoc = 5; break; default: return; // Bad position } lbpLCDWF = (uint8_t *)&LCD->WF8B[0]; if (on) { lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[tableLoc]]|=1; } else { lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[tableLoc]]&=~1; } } void SLCD::DP1 (int mode) { DP(0, mode==1); } void SLCD::DP2 (int mode) { DP(1, mode==1); } void SLCD::DP3 (int mode) { DP(2, mode==1); } void SLCD::Colon (int mode) { uint8_t *lbpLCDWF; lbpLCDWF = (uint8_t *)&LCD->WF8B[0]; if (mode==1) { lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[7]]|=1; } else { lbpLCDWF[(uint8_t)WF_ORDERING_TABLE[7]]&=~1; } } void SLCD::blink(int blink) { if (( blink > 7) || (blink < 0)) LCD->AR &= ~LCD_AR_BLINK_MASK; else LCD->AR |= LCD_AR_BLINK_MASK | blink; } void SLCD::deepsleepEnable(bool enable) { MCG->C1 &= ~MCG_C1_IREFSTEN_MASK; MCG->C1 |= enable << MCG_C1_IREFSTEN_SHIFT; LCD->GCR &= ~LCD_GCR_LCDSTP_MASK; LCD->GCR |= (!enable) << LCD_GCR_LCDSTP_SHIFT; }