Olle Sköld
This demo reads a bitmap from a FAT formatted SD-card, copies it to flash and displays it on the screen. The demo is based on the following project: https://os.mbed.com/users/DieterGraef/code/DISCO-F746NG_SDFileSystem/
Dependencies: LCD_DISCO_F746NG TS_DISCO_F746NG mbed FATFileSystem
Fork of
DISCO-F746NG_SDFileSystem
by 
Dieter Graef
Revision 4:95e30a911d97, committed 2018-04-19
- Comitter:
- Lightsource
- Date:
- Thu Apr 19 19:59:54 2018 +0000
- Parent:
- 3:f93fcb3e2650
- Commit message:
- Demo that reads a bitmap from SD-card, copies it to flash and displays it on the screen.
Changed in this revision
--- a/BSP_DISCO_F746NG.lib Wed Apr 13 09:54:35 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1 +0,0 @@ -https://developer.mbed.org/teams/ST/code/BSP_DISCO_F746NG/#458ab1edf6b2
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/audio.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,122 @@
+/**
+ ******************************************************************************
+ * @file audio.h
+ * @author MCD Application Team
+ * @version V4.0.0
+ * @date 22-June-2015
+ * @brief This header file contains the common defines and functions prototypes
+ * for the Audio driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AUDIO_H
+#define __AUDIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include <stdint.h>
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup Components
+ * @{
+ */
+
+/** @addtogroup AUDIO
+ * @{
+ */
+
+/** @defgroup AUDIO_Exported_Constants
+ * @{
+ */
+
+/* Codec audio Standards */
+#define CODEC_STANDARD 0x04
+#define I2S_STANDARD I2S_STANDARD_PHILIPS
+
+/**
+ * @}
+ */
+
+/** @defgroup AUDIO_Exported_Types
+ * @{
+ */
+
+/** @defgroup AUDIO_Driver_structure Audio Driver structure
+ * @{
+ */
+typedef struct
+{
+ uint32_t (*Init)(uint16_t, uint16_t, uint8_t, uint32_t);
+ void (*DeInit)(void);
+ uint32_t (*ReadID)(uint16_t);
+ uint32_t (*Play)(uint16_t, uint16_t*, uint16_t);
+ uint32_t (*Pause)(uint16_t);
+ uint32_t (*Resume)(uint16_t);
+ uint32_t (*Stop)(uint16_t, uint32_t);
+ uint32_t (*SetFrequency)(uint16_t, uint32_t);
+ uint32_t (*SetVolume)(uint16_t, uint8_t);
+ uint32_t (*SetMute)(uint16_t, uint32_t);
+ uint32_t (*SetOutputMode)(uint16_t, uint8_t);
+ uint32_t (*Reset)(uint16_t);
+}AUDIO_DrvTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __AUDIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/camera.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,141 @@
+/**
+ ******************************************************************************
+ * @file camera.h
+ * @author MCD Application Team
+ * @version V4.0.0
+ * @date 22-June-2015
+ * @brief This header file contains the common defines and functions prototypes
+ * for the camera driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __CAMERA_H
+#define __CAMERA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include <stdint.h>
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup Components
+ * @{
+ */
+
+/** @addtogroup CAMERA
+ * @{
+ */
+
+
+/** @defgroup CAMERA_Exported_Types
+ * @{
+ */
+
+/** @defgroup CAMERA_Driver_structure Camera Driver structure
+ * @{
+ */
+typedef struct
+{
+ void (*Init)(uint16_t, uint32_t);
+ uint16_t (*ReadID)(uint16_t);
+ void (*Config)(uint16_t, uint32_t, uint32_t, uint32_t);
+}CAMERA_DrvTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAMERA_Exported_Constants
+ * @{
+ */
+#define CAMERA_R160x120 0x00 /* QQVGA Resolution */
+#define CAMERA_R320x240 0x01 /* QVGA Resolution */
+#define CAMERA_R480x272 0x02 /* 480x272 Resolution */
+#define CAMERA_R640x480 0x03 /* VGA Resolution */
+
+#define CAMERA_CONTRAST_BRIGHTNESS 0x00 /* Camera contrast brightness features */
+#define CAMERA_BLACK_WHITE 0x01 /* Camera black white feature */
+#define CAMERA_COLOR_EFFECT 0x03 /* Camera color effect feature */
+
+#define CAMERA_BRIGHTNESS_LEVEL0 0x00 /* Brightness level -2 */
+#define CAMERA_BRIGHTNESS_LEVEL1 0x01 /* Brightness level -1 */
+#define CAMERA_BRIGHTNESS_LEVEL2 0x02 /* Brightness level 0 */
+#define CAMERA_BRIGHTNESS_LEVEL3 0x03 /* Brightness level +1 */
+#define CAMERA_BRIGHTNESS_LEVEL4 0x04 /* Brightness level +2 */
+
+#define CAMERA_CONTRAST_LEVEL0 0x05 /* Contrast level -2 */
+#define CAMERA_CONTRAST_LEVEL1 0x06 /* Contrast level -1 */
+#define CAMERA_CONTRAST_LEVEL2 0x07 /* Contrast level 0 */
+#define CAMERA_CONTRAST_LEVEL3 0x08 /* Contrast level +1 */
+#define CAMERA_CONTRAST_LEVEL4 0x09 /* Contrast level +2 */
+
+#define CAMERA_BLACK_WHITE_BW 0x00 /* Black and white effect */
+#define CAMERA_BLACK_WHITE_NEGATIVE 0x01 /* Negative effect */
+#define CAMERA_BLACK_WHITE_BW_NEGATIVE 0x02 /* BW and Negative effect */
+#define CAMERA_BLACK_WHITE_NORMAL 0x03 /* Normal effect */
+
+#define CAMERA_COLOR_EFFECT_NONE 0x00 /* No effects */
+#define CAMERA_COLOR_EFFECT_BLUE 0x01 /* Blue effect */
+#define CAMERA_COLOR_EFFECT_GREEN 0x02 /* Green effect */
+#define CAMERA_COLOR_EFFECT_RED 0x03 /* Red effect */
+#define CAMERA_COLOR_EFFECT_ANTIQUE 0x04 /* Antique effect */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CAMERA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/font12.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,1464 @@
+/**
+ ******************************************************************************
+ * @file Font12.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 18-February-2014
+ * @brief This file provides text Font12 for STM32xx-EVAL's LCD driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "fonts.h"
+
+/** @addtogroup Utilities
+ * @{
+ */
+
+/** @addtogroup STM32_EVAL
+ * @{
+ */
+
+/** @addtogroup Common
+ * @{
+ */
+
+/** @addtogroup FONTS
+ * @brief This file provides text Font12 for STM32xx-EVAL's LCD driver.
+ * @{
+ */
+
+/** @defgroup FONTS_Private_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Variables
+ * @{
+ */
+//
+// Font data for Courier New 12pt
+//
+
+const uint8_t Font12_Table[] =
+{
+ // @0 ' ' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @12 '!' (7 pixels wide)
+ 0x00, //
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x00, //
+ 0x00, //
+ 0x10, // #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @24 '"' (7 pixels wide)
+ 0x00, //
+ 0x6C, // ## ##
+ 0x48, // # #
+ 0x48, // # #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @36 '#' (7 pixels wide)
+ 0x00, //
+ 0x14, // # #
+ 0x14, // # #
+ 0x28, // # #
+ 0x7C, // #####
+ 0x28, // # #
+ 0x7C, // #####
+ 0x28, // # #
+ 0x50, // # #
+ 0x50, // # #
+ 0x00, //
+ 0x00, //
+
+ // @48 '$' (7 pixels wide)
+ 0x00, //
+ 0x10, // #
+ 0x38, // ###
+ 0x40, // #
+ 0x40, // #
+ 0x38, // ###
+ 0x48, // # #
+ 0x70, // ###
+ 0x10, // #
+ 0x10, // #
+ 0x00, //
+ 0x00, //
+
+ // @60 '%' (7 pixels wide)
+ 0x00, //
+ 0x20, // #
+ 0x50, // # #
+ 0x20, // #
+ 0x0C, // ##
+ 0x70, // ###
+ 0x08, // #
+ 0x14, // # #
+ 0x08, // #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @72 '&' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x18, // ##
+ 0x20, // #
+ 0x20, // #
+ 0x54, // # # #
+ 0x48, // # #
+ 0x34, // ## #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @84 ''' (7 pixels wide)
+ 0x00, //
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @96 '(' (7 pixels wide)
+ 0x00, //
+ 0x08, // #
+ 0x08, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x08, // #
+ 0x08, // #
+ 0x00, //
+
+ // @108 ')' (7 pixels wide)
+ 0x00, //
+ 0x20, // #
+ 0x20, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x20, // #
+ 0x20, // #
+ 0x00, //
+
+ // @120 '*' (7 pixels wide)
+ 0x00, //
+ 0x10, // #
+ 0x7C, // #####
+ 0x10, // #
+ 0x28, // # #
+ 0x28, // # #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @132 '+' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0xFE, // #######
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @144 ',' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x18, // ##
+ 0x10, // #
+ 0x30, // ##
+ 0x20, // #
+ 0x00, //
+
+ // @156 '-' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x7C, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @168 '.' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x30, // ##
+ 0x30, // ##
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @180 '/' (7 pixels wide)
+ 0x00, //
+ 0x04, // #
+ 0x04, // #
+ 0x08, // #
+ 0x08, // #
+ 0x10, // #
+ 0x10, // #
+ 0x20, // #
+ 0x20, // #
+ 0x40, // #
+ 0x00, //
+ 0x00, //
+
+ // @192 '0' (7 pixels wide)
+ 0x00, //
+ 0x38, // ###
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @204 '1' (7 pixels wide)
+ 0x00, //
+ 0x30, // ##
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x7C, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @216 '2' (7 pixels wide)
+ 0x00, //
+ 0x38, // ###
+ 0x44, // # #
+ 0x04, // #
+ 0x08, // #
+ 0x10, // #
+ 0x20, // #
+ 0x44, // # #
+ 0x7C, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @228 '3' (7 pixels wide)
+ 0x00, //
+ 0x38, // ###
+ 0x44, // # #
+ 0x04, // #
+ 0x18, // ##
+ 0x04, // #
+ 0x04, // #
+ 0x44, // # #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @240 '4' (7 pixels wide)
+ 0x00, //
+ 0x0C, // ##
+ 0x14, // # #
+ 0x14, // # #
+ 0x24, // # #
+ 0x44, // # #
+ 0x7E, // ######
+ 0x04, // #
+ 0x0E, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @252 '5' (7 pixels wide)
+ 0x00, //
+ 0x3C, // ####
+ 0x20, // #
+ 0x20, // #
+ 0x38, // ###
+ 0x04, // #
+ 0x04, // #
+ 0x44, // # #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @264 '6' (7 pixels wide)
+ 0x00, //
+ 0x1C, // ###
+ 0x20, // #
+ 0x40, // #
+ 0x78, // ####
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @276 '7' (7 pixels wide)
+ 0x00, //
+ 0x7C, // #####
+ 0x44, // # #
+ 0x04, // #
+ 0x08, // #
+ 0x08, // #
+ 0x08, // #
+ 0x10, // #
+ 0x10, // #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @288 '8' (7 pixels wide)
+ 0x00, //
+ 0x38, // ###
+ 0x44, // # #
+ 0x44, // # #
+ 0x38, // ###
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @300 '9' (7 pixels wide)
+ 0x00, //
+ 0x38, // ###
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x3C, // ####
+ 0x04, // #
+ 0x08, // #
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @312 ':' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x30, // ##
+ 0x30, // ##
+ 0x00, //
+ 0x00, //
+ 0x30, // ##
+ 0x30, // ##
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @324 ';' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x18, // ##
+ 0x18, // ##
+ 0x00, //
+ 0x00, //
+ 0x18, // ##
+ 0x30, // ##
+ 0x20, // #
+ 0x00, //
+ 0x00, //
+
+ // @336 '<' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x0C, // ##
+ 0x10, // #
+ 0x60, // ##
+ 0x80, // #
+ 0x60, // ##
+ 0x10, // #
+ 0x0C, // ##
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @348 '=' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x7C, // #####
+ 0x00, //
+ 0x7C, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @360 '>' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0xC0, // ##
+ 0x20, // #
+ 0x18, // ##
+ 0x04, // #
+ 0x18, // ##
+ 0x20, // #
+ 0xC0, // ##
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @372 '?' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x18, // ##
+ 0x24, // # #
+ 0x04, // #
+ 0x08, // #
+ 0x10, // #
+ 0x00, //
+ 0x30, // ##
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @384 '@' (7 pixels wide)
+ 0x38, // ###
+ 0x44, // # #
+ 0x44, // # #
+ 0x4C, // # ##
+ 0x54, // # # #
+ 0x54, // # # #
+ 0x4C, // # ##
+ 0x40, // #
+ 0x44, // # #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+
+ // @396 'A' (7 pixels wide)
+ 0x00, //
+ 0x30, // ##
+ 0x10, // #
+ 0x28, // # #
+ 0x28, // # #
+ 0x28, // # #
+ 0x7C, // #####
+ 0x44, // # #
+ 0xEE, // ### ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @408 'B' (7 pixels wide)
+ 0x00, //
+ 0xF8, // #####
+ 0x44, // # #
+ 0x44, // # #
+ 0x78, // ####
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0xF8, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @420 'C' (7 pixels wide)
+ 0x00, //
+ 0x3C, // ####
+ 0x44, // # #
+ 0x40, // #
+ 0x40, // #
+ 0x40, // #
+ 0x40, // #
+ 0x44, // # #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @432 'D' (7 pixels wide)
+ 0x00, //
+ 0xF0, // ####
+ 0x48, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x48, // # #
+ 0xF0, // ####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @444 'E' (7 pixels wide)
+ 0x00, //
+ 0xFC, // ######
+ 0x44, // # #
+ 0x50, // # #
+ 0x70, // ###
+ 0x50, // # #
+ 0x40, // #
+ 0x44, // # #
+ 0xFC, // ######
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @456 'F' (7 pixels wide)
+ 0x00, //
+ 0x7E, // ######
+ 0x22, // # #
+ 0x28, // # #
+ 0x38, // ###
+ 0x28, // # #
+ 0x20, // #
+ 0x20, // #
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @468 'G' (7 pixels wide)
+ 0x00, //
+ 0x3C, // ####
+ 0x44, // # #
+ 0x40, // #
+ 0x40, // #
+ 0x4E, // # ###
+ 0x44, // # #
+ 0x44, // # #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @480 'H' (7 pixels wide)
+ 0x00, //
+ 0xEE, // ### ###
+ 0x44, // # #
+ 0x44, // # #
+ 0x7C, // #####
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0xEE, // ### ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @492 'I' (7 pixels wide)
+ 0x00, //
+ 0x7C, // #####
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x7C, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @504 'J' (7 pixels wide)
+ 0x00, //
+ 0x3C, // ####
+ 0x08, // #
+ 0x08, // #
+ 0x08, // #
+ 0x48, // # #
+ 0x48, // # #
+ 0x48, // # #
+ 0x30, // ##
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @516 'K' (7 pixels wide)
+ 0x00, //
+ 0xEE, // ### ###
+ 0x44, // # #
+ 0x48, // # #
+ 0x50, // # #
+ 0x70, // ###
+ 0x48, // # #
+ 0x44, // # #
+ 0xE6, // ### ##
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @528 'L' (7 pixels wide)
+ 0x00, //
+ 0x70, // ###
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x24, // # #
+ 0x24, // # #
+ 0x7C, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @540 'M' (7 pixels wide)
+ 0x00, //
+ 0xEE, // ### ###
+ 0x6C, // ## ##
+ 0x6C, // ## ##
+ 0x54, // # # #
+ 0x54, // # # #
+ 0x44, // # #
+ 0x44, // # #
+ 0xEE, // ### ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @552 'N' (7 pixels wide)
+ 0x00, //
+ 0xEE, // ### ###
+ 0x64, // ## #
+ 0x64, // ## #
+ 0x54, // # # #
+ 0x54, // # # #
+ 0x54, // # # #
+ 0x4C, // # ##
+ 0xEC, // ### ##
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @564 'O' (7 pixels wide)
+ 0x00, //
+ 0x38, // ###
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @576 'P' (7 pixels wide)
+ 0x00, //
+ 0x78, // ####
+ 0x24, // # #
+ 0x24, // # #
+ 0x24, // # #
+ 0x38, // ###
+ 0x20, // #
+ 0x20, // #
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @588 'Q' (7 pixels wide)
+ 0x00, //
+ 0x38, // ###
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x38, // ###
+ 0x1C, // ###
+ 0x00, //
+ 0x00, //
+
+ // @600 'R' (7 pixels wide)
+ 0x00, //
+ 0xF8, // #####
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x78, // ####
+ 0x48, // # #
+ 0x44, // # #
+ 0xE2, // ### #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @612 'S' (7 pixels wide)
+ 0x00, //
+ 0x34, // ## #
+ 0x4C, // # ##
+ 0x40, // #
+ 0x38, // ###
+ 0x04, // #
+ 0x04, // #
+ 0x64, // ## #
+ 0x58, // # ##
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @624 'T' (7 pixels wide)
+ 0x00, //
+ 0xFE, // #######
+ 0x92, // # # #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @636 'U' (7 pixels wide)
+ 0x00, //
+ 0xEE, // ### ###
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @648 'V' (7 pixels wide)
+ 0x00, //
+ 0xEE, // ### ###
+ 0x44, // # #
+ 0x44, // # #
+ 0x28, // # #
+ 0x28, // # #
+ 0x28, // # #
+ 0x10, // #
+ 0x10, // #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @660 'W' (7 pixels wide)
+ 0x00, //
+ 0xEE, // ### ###
+ 0x44, // # #
+ 0x44, // # #
+ 0x54, // # # #
+ 0x54, // # # #
+ 0x54, // # # #
+ 0x54, // # # #
+ 0x28, // # #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @672 'X' (7 pixels wide)
+ 0x00, //
+ 0xC6, // ## ##
+ 0x44, // # #
+ 0x28, // # #
+ 0x10, // #
+ 0x10, // #
+ 0x28, // # #
+ 0x44, // # #
+ 0xC6, // ## ##
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @684 'Y' (7 pixels wide)
+ 0x00, //
+ 0xEE, // ### ###
+ 0x44, // # #
+ 0x28, // # #
+ 0x28, // # #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @696 'Z' (7 pixels wide)
+ 0x00, //
+ 0x7C, // #####
+ 0x44, // # #
+ 0x08, // #
+ 0x10, // #
+ 0x10, // #
+ 0x20, // #
+ 0x44, // # #
+ 0x7C, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @708 '[' (7 pixels wide)
+ 0x00, //
+ 0x38, // ###
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x38, // ###
+ 0x00, //
+
+ // @720 '\' (7 pixels wide)
+ 0x00, //
+ 0x40, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x10, // #
+ 0x10, // #
+ 0x08, // #
+ 0x08, // #
+ 0x08, // #
+ 0x00, //
+ 0x00, //
+
+ // @732 ']' (7 pixels wide)
+ 0x00, //
+ 0x38, // ###
+ 0x08, // #
+ 0x08, // #
+ 0x08, // #
+ 0x08, // #
+ 0x08, // #
+ 0x08, // #
+ 0x08, // #
+ 0x08, // #
+ 0x38, // ###
+ 0x00, //
+
+ // @744 '^' (7 pixels wide)
+ 0x00, //
+ 0x10, // #
+ 0x10, // #
+ 0x28, // # #
+ 0x44, // # #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @756 '_' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0xFE, // #######
+
+ // @768 '`' (7 pixels wide)
+ 0x00, //
+ 0x10, // #
+ 0x08, // #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @780 'a' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x38, // ###
+ 0x44, // # #
+ 0x3C, // ####
+ 0x44, // # #
+ 0x44, // # #
+ 0x3E, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @792 'b' (7 pixels wide)
+ 0x00, //
+ 0xC0, // ##
+ 0x40, // #
+ 0x58, // # ##
+ 0x64, // ## #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0xF8, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @804 'c' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x3C, // ####
+ 0x44, // # #
+ 0x40, // #
+ 0x40, // #
+ 0x44, // # #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @816 'd' (7 pixels wide)
+ 0x00, //
+ 0x0C, // ##
+ 0x04, // #
+ 0x34, // ## #
+ 0x4C, // # ##
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x3E, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @828 'e' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x38, // ###
+ 0x44, // # #
+ 0x7C, // #####
+ 0x40, // #
+ 0x40, // #
+ 0x3C, // ####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @840 'f' (7 pixels wide)
+ 0x00, //
+ 0x1C, // ###
+ 0x20, // #
+ 0x7C, // #####
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x7C, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @852 'g' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x36, // ## ##
+ 0x4C, // # ##
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x3C, // ####
+ 0x04, // #
+ 0x38, // ###
+ 0x00, //
+
+ // @864 'h' (7 pixels wide)
+ 0x00, //
+ 0xC0, // ##
+ 0x40, // #
+ 0x58, // # ##
+ 0x64, // ## #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0xEE, // ### ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @876 'i' (7 pixels wide)
+ 0x00, //
+ 0x10, // #
+ 0x00, //
+ 0x70, // ###
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x7C, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @888 'j' (7 pixels wide)
+ 0x00, //
+ 0x10, // #
+ 0x00, //
+ 0x78, // ####
+ 0x08, // #
+ 0x08, // #
+ 0x08, // #
+ 0x08, // #
+ 0x08, // #
+ 0x08, // #
+ 0x70, // ###
+ 0x00, //
+
+ // @900 'k' (7 pixels wide)
+ 0x00, //
+ 0xC0, // ##
+ 0x40, // #
+ 0x5C, // # ###
+ 0x48, // # #
+ 0x70, // ###
+ 0x50, // # #
+ 0x48, // # #
+ 0xDC, // ## ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @912 'l' (7 pixels wide)
+ 0x00, //
+ 0x30, // ##
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x7C, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @924 'm' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0xE8, // ### #
+ 0x54, // # # #
+ 0x54, // # # #
+ 0x54, // # # #
+ 0x54, // # # #
+ 0xFE, // #######
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @936 'n' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0xD8, // ## ##
+ 0x64, // ## #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0xEE, // ### ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @948 'o' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x38, // ###
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @960 'p' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0xD8, // ## ##
+ 0x64, // ## #
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x78, // ####
+ 0x40, // #
+ 0xE0, // ###
+ 0x00, //
+
+ // @972 'q' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x36, // ## ##
+ 0x4C, // # ##
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x3C, // ####
+ 0x04, // #
+ 0x0E, // ###
+ 0x00, //
+
+ // @984 'r' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x6C, // ## ##
+ 0x30, // ##
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x7C, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @996 's' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x3C, // ####
+ 0x44, // # #
+ 0x38, // ###
+ 0x04, // #
+ 0x44, // # #
+ 0x78, // ####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @1008 't' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x20, // #
+ 0x7C, // #####
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x22, // # #
+ 0x1C, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @1020 'u' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0xCC, // ## ##
+ 0x44, // # #
+ 0x44, // # #
+ 0x44, // # #
+ 0x4C, // # ##
+ 0x36, // ## ##
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @1032 'v' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0xEE, // ### ###
+ 0x44, // # #
+ 0x44, // # #
+ 0x28, // # #
+ 0x28, // # #
+ 0x10, // #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @1044 'w' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0xEE, // ### ###
+ 0x44, // # #
+ 0x54, // # # #
+ 0x54, // # # #
+ 0x54, // # # #
+ 0x28, // # #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @1056 'x' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0xCC, // ## ##
+ 0x48, // # #
+ 0x30, // ##
+ 0x30, // ##
+ 0x48, // # #
+ 0xCC, // ## ##
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @1068 'y' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0xEE, // ### ###
+ 0x44, // # #
+ 0x24, // # #
+ 0x28, // # #
+ 0x18, // ##
+ 0x10, // #
+ 0x10, // #
+ 0x78, // ####
+ 0x00, //
+
+ // @1080 'z' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x7C, // #####
+ 0x48, // # #
+ 0x10, // #
+ 0x20, // #
+ 0x44, // # #
+ 0x7C, // #####
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @1092 '{' (7 pixels wide)
+ 0x00, //
+ 0x08, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x20, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x08, // #
+ 0x00, //
+
+ // @1104 '|' (7 pixels wide)
+ 0x00, //
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x00, //
+ 0x00, //
+
+ // @1116 '}' (7 pixels wide)
+ 0x00, //
+ 0x20, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x08, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x20, // #
+ 0x00, //
+
+ // @1128 '~' (7 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x24, // # #
+ 0x58, // # ##
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+};
+
+sFONT Font12 = {
+ Font12_Table,
+ 7, /* Width */
+ 12, /* Height */
+};
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Function_Prototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/font16.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,1844 @@
+/**
+ ******************************************************************************
+ * @file font16.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 18-February-2014
+ * @brief This file provides text font16 for STM32xx-EVAL's LCD driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "fonts.h"
+
+/** @addtogroup Utilities
+ * @{
+ */
+
+/** @addtogroup STM32_EVAL
+ * @{
+ */
+
+/** @addtogroup Common
+ * @{
+ */
+
+/** @addtogroup FONTS
+ * @brief This file provides text font16 for STM32xx-EVAL's LCD driver.
+ * @{
+ */
+
+/** @defgroup FONTS_Private_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Variables
+ * @{
+ */
+//
+// Font data for Courier New 12pt
+//
+
+const uint8_t Font16_Table[] =
+{
+ // @0 ' ' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @32 '!' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x00, 0x00, //
+ 0x0C, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @64 '"' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1D, 0xC0, // ### ###
+ 0x1D, 0xC0, // ### ###
+ 0x08, 0x80, // # #
+ 0x08, 0x80, // # #
+ 0x08, 0x80, // # #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @96 '#' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x0D, 0x80, // ## ##
+ 0x0D, 0x80, // ## ##
+ 0x0D, 0x80, // ## ##
+ 0x0D, 0x80, // ## ##
+ 0x3F, 0xC0, // ########
+ 0x1B, 0x00, // ## ##
+ 0x3F, 0xC0, // ########
+ 0x1B, 0x00, // ## ##
+ 0x1B, 0x00, // ## ##
+ 0x1B, 0x00, // ## ##
+ 0x1B, 0x00, // ## ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @128 '$' (11 pixels wide)
+ 0x04, 0x00, // #
+ 0x1F, 0x80, // ######
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x38, 0x00, // ###
+ 0x1E, 0x00, // ####
+ 0x0F, 0x00, // ####
+ 0x03, 0x80, // ###
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x3F, 0x00, // ######
+ 0x04, 0x00, // #
+ 0x04, 0x00, // #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @160 '%' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x18, 0x00, // ##
+ 0x24, 0x00, // # #
+ 0x24, 0x00, // # #
+ 0x18, 0xC0, // ## ##
+ 0x07, 0x80, // ####
+ 0x1E, 0x00, // ####
+ 0x31, 0x80, // ## ##
+ 0x02, 0x40, // # #
+ 0x02, 0x40, // # #
+ 0x01, 0x80, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @192 '&' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x0F, 0x00, // ####
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x1D, 0x80, // ### ##
+ 0x37, 0x00, // ## ###
+ 0x33, 0x00, // ## ##
+ 0x1D, 0x80, // ### ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @224 ''' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x07, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x02, 0x00, // #
+ 0x02, 0x00, // #
+ 0x02, 0x00, // #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @256 '(' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x0E, 0x00, // ###
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0E, 0x00, // ###
+ 0x06, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @288 ')' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x1C, 0x00, // ###
+ 0x18, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @320 '*' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x3F, 0xC0, // ########
+ 0x3F, 0xC0, // ########
+ 0x0F, 0x00, // ####
+ 0x1F, 0x80, // ######
+ 0x19, 0x80, // ## ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @352 '+' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x04, 0x00, // #
+ 0x04, 0x00, // #
+ 0x04, 0x00, // #
+ 0x3F, 0x80, // #######
+ 0x04, 0x00, // #
+ 0x04, 0x00, // #
+ 0x04, 0x00, // #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @384 ',' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x06, 0x00, // ##
+ 0x04, 0x00, // #
+ 0x0C, 0x00, // ##
+ 0x08, 0x00, // #
+ 0x08, 0x00, // #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @416 '-' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3F, 0x80, // #######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @448 '.' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @480 '/' (11 pixels wide)
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @512 '0' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x0E, 0x00, // ###
+ 0x1B, 0x00, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x1B, 0x00, // ## ##
+ 0x0E, 0x00, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @544 '1' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x06, 0x00, // ##
+ 0x3E, 0x00, // #####
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x3F, 0xC0, // ########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @576 '2' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x0F, 0x00, // ####
+ 0x19, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x03, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x3F, 0x80, // #######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @608 '3' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x3F, 0x00, // ######
+ 0x61, 0x80, // ## ##
+ 0x01, 0x80, // ##
+ 0x03, 0x00, // ##
+ 0x1F, 0x00, // #####
+ 0x03, 0x80, // ###
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x61, 0x80, // ## ##
+ 0x3F, 0x00, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @640 '4' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x07, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x0F, 0x00, // ####
+ 0x0B, 0x00, // # ##
+ 0x1B, 0x00, // ## ##
+ 0x13, 0x00, // # ##
+ 0x33, 0x00, // ## ##
+ 0x3F, 0x80, // #######
+ 0x03, 0x00, // ##
+ 0x0F, 0x80, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @672 '5' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x1F, 0x80, // ######
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x1F, 0x00, // #####
+ 0x11, 0x80, // # ##
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x21, 0x80, // # ##
+ 0x1F, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @704 '6' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x07, 0x80, // ####
+ 0x1C, 0x00, // ###
+ 0x18, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x37, 0x00, // ## ###
+ 0x39, 0x80, // ### ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x19, 0x80, // ## ##
+ 0x0F, 0x00, // ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @736 '7' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x7F, 0x00, // #######
+ 0x43, 0x00, // # ##
+ 0x03, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @768 '8' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x1F, 0x00, // #####
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x1F, 0x00, // #####
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x1F, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @800 '9' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x1E, 0x00, // ####
+ 0x33, 0x00, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x33, 0x80, // ## ###
+ 0x1D, 0x80, // ### ##
+ 0x01, 0x80, // ##
+ 0x03, 0x00, // ##
+ 0x07, 0x00, // ###
+ 0x3C, 0x00, // ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @832 ':' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @864 ';' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x06, 0x00, // ##
+ 0x04, 0x00, // #
+ 0x08, 0x00, // #
+ 0x08, 0x00, // #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @896 '<' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0xC0, // ##
+ 0x03, 0x00, // ##
+ 0x04, 0x00, // #
+ 0x18, 0x00, // ##
+ 0x60, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x04, 0x00, // #
+ 0x03, 0x00, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @928 '=' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7F, 0xC0, // #########
+ 0x00, 0x00, //
+ 0x7F, 0xC0, // #########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @960 '>' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x60, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x04, 0x00, // #
+ 0x03, 0x00, // ##
+ 0x00, 0xC0, // ##
+ 0x03, 0x00, // ##
+ 0x04, 0x00, // #
+ 0x18, 0x00, // ##
+ 0x60, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @992 '?' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0x00, // #####
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x01, 0x80, // ##
+ 0x07, 0x00, // ###
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x00, 0x00, //
+ 0x0C, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1024 '@' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x0E, 0x00, // ###
+ 0x11, 0x00, // # #
+ 0x21, 0x00, // # #
+ 0x21, 0x00, // # #
+ 0x27, 0x00, // # ###
+ 0x29, 0x00, // # # #
+ 0x29, 0x00, // # # #
+ 0x27, 0x00, // # ###
+ 0x20, 0x00, // #
+ 0x11, 0x00, // # #
+ 0x0E, 0x00, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1056 'A' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3F, 0x00, // ######
+ 0x0F, 0x00, // ####
+ 0x09, 0x00, // # #
+ 0x19, 0x80, // ## ##
+ 0x19, 0x80, // ## ##
+ 0x1F, 0x80, // ######
+ 0x30, 0xC0, // ## ##
+ 0x30, 0xC0, // ## ##
+ 0x79, 0xE0, // #### ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1088 'B' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7F, 0x00, // #######
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x3F, 0x00, // ######
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x7F, 0x00, // #######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1120 'C' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0x40, // ##### #
+ 0x30, 0xC0, // ## ##
+ 0x60, 0x40, // ## #
+ 0x60, 0x00, // ##
+ 0x60, 0x00, // ##
+ 0x60, 0x00, // ##
+ 0x60, 0x40, // ## #
+ 0x30, 0x80, // ## #
+ 0x1F, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1152 'D' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7F, 0x00, // #######
+ 0x31, 0x80, // ## ##
+ 0x30, 0xC0, // ## ##
+ 0x30, 0xC0, // ## ##
+ 0x30, 0xC0, // ## ##
+ 0x30, 0xC0, // ## ##
+ 0x30, 0xC0, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x7F, 0x00, // #######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1184 'E' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7F, 0x80, // ########
+ 0x30, 0x80, // ## #
+ 0x30, 0x80, // ## #
+ 0x32, 0x00, // ## #
+ 0x3E, 0x00, // #####
+ 0x32, 0x00, // ## #
+ 0x30, 0x80, // ## #
+ 0x30, 0x80, // ## #
+ 0x7F, 0x80, // ########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1216 'F' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7F, 0xC0, // #########
+ 0x30, 0x40, // ## #
+ 0x30, 0x40, // ## #
+ 0x32, 0x00, // ## #
+ 0x3E, 0x00, // #####
+ 0x32, 0x00, // ## #
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x7C, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1248 'G' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1E, 0x80, // #### #
+ 0x31, 0x80, // ## ##
+ 0x60, 0x80, // ## #
+ 0x60, 0x00, // ##
+ 0x60, 0x00, // ##
+ 0x67, 0xC0, // ## #####
+ 0x61, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x1F, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1280 'H' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7B, 0xC0, // #### ####
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x3F, 0x80, // #######
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x7B, 0xC0, // #### ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1312 'I' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3F, 0xC0, // ########
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x3F, 0xC0, // ########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1344 'J' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0xC0, // #######
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x63, 0x00, // ## ##
+ 0x63, 0x00, // ## ##
+ 0x63, 0x00, // ## ##
+ 0x3E, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1376 'K' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7B, 0xC0, // #### ####
+ 0x31, 0x80, // ## ##
+ 0x33, 0x00, // ## ##
+ 0x36, 0x00, // ## ##
+ 0x3C, 0x00, // ####
+ 0x3E, 0x00, // #####
+ 0x33, 0x00, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x79, 0xC0, // #### ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1408 'L' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7E, 0x00, // ######
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x18, 0x40, // ## #
+ 0x18, 0x40, // ## #
+ 0x18, 0x40, // ## #
+ 0x7F, 0xC0, // #########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1440 'M' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0xE0, 0xE0, // ### ###
+ 0x60, 0xC0, // ## ##
+ 0x71, 0xC0, // ### ###
+ 0x7B, 0xC0, // #### ####
+ 0x6A, 0xC0, // ## # # ##
+ 0x6E, 0xC0, // ## ### ##
+ 0x64, 0xC0, // ## # ##
+ 0x60, 0xC0, // ## ##
+ 0xFB, 0xE0, // ##### #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1472 'N' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x73, 0xC0, // ### ####
+ 0x31, 0x80, // ## ##
+ 0x39, 0x80, // ### ##
+ 0x3D, 0x80, // #### ##
+ 0x35, 0x80, // ## # ##
+ 0x37, 0x80, // ## ####
+ 0x33, 0x80, // ## ###
+ 0x31, 0x80, // ## ##
+ 0x79, 0x80, // #### ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1504 'O' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0x00, // #####
+ 0x31, 0x80, // ## ##
+ 0x60, 0xC0, // ## ##
+ 0x60, 0xC0, // ## ##
+ 0x60, 0xC0, // ## ##
+ 0x60, 0xC0, // ## ##
+ 0x60, 0xC0, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x1F, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1536 'P' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7F, 0x00, // #######
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x3F, 0x00, // ######
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x7E, 0x00, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1568 'Q' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0x00, // #####
+ 0x31, 0x80, // ## ##
+ 0x60, 0xC0, // ## ##
+ 0x60, 0xC0, // ## ##
+ 0x60, 0xC0, // ## ##
+ 0x60, 0xC0, // ## ##
+ 0x60, 0xC0, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x1F, 0x00, // #####
+ 0x0C, 0xC0, // ## ##
+ 0x1F, 0x80, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1600 'R' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7F, 0x00, // #######
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x3E, 0x00, // #####
+ 0x33, 0x00, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x7C, 0xE0, // ##### ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1632 'S' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0x80, // ######
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x38, 0x00, // ###
+ 0x1F, 0x00, // #####
+ 0x03, 0x80, // ###
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x3F, 0x00, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1664 'T' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7F, 0x80, // ########
+ 0x4C, 0x80, // # ## #
+ 0x4C, 0x80, // # ## #
+ 0x4C, 0x80, // # ## #
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x3F, 0x00, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1696 'U' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7B, 0xC0, // #### ####
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x1F, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1728 'V' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7B, 0xC0, // #### ####
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x1B, 0x00, // ## ##
+ 0x1B, 0x00, // ## ##
+ 0x1B, 0x00, // ## ##
+ 0x0A, 0x00, // # #
+ 0x0E, 0x00, // ###
+ 0x0E, 0x00, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1760 'W' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0xFB, 0xE0, // ##### #####
+ 0x60, 0xC0, // ## ##
+ 0x64, 0xC0, // ## # ##
+ 0x6E, 0xC0, // ## ### ##
+ 0x6E, 0xC0, // ## ### ##
+ 0x2A, 0x80, // # # # #
+ 0x3B, 0x80, // ### ###
+ 0x3B, 0x80, // ### ###
+ 0x31, 0x80, // ## ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1792 'X' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7B, 0xC0, // #### ####
+ 0x31, 0x80, // ## ##
+ 0x1B, 0x00, // ## ##
+ 0x0E, 0x00, // ###
+ 0x0E, 0x00, // ###
+ 0x0E, 0x00, // ###
+ 0x1B, 0x00, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x7B, 0xC0, // #### ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1824 'Y' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x79, 0xE0, // #### ####
+ 0x30, 0xC0, // ## ##
+ 0x19, 0x80, // ## ##
+ 0x0F, 0x00, // ####
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x1F, 0x80, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1856 'Z' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3F, 0x80, // #######
+ 0x21, 0x80, // # ##
+ 0x23, 0x00, // # ##
+ 0x06, 0x00, // ##
+ 0x04, 0x00, // #
+ 0x0C, 0x00, // ##
+ 0x18, 0x80, // ## #
+ 0x30, 0x80, // ## #
+ 0x3F, 0x80, // #######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1888 '[' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x07, 0x80, // ####
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x07, 0x80, // ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1920 '\' (11 pixels wide)
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1952 ']' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x1E, 0x00, // ####
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x1E, 0x00, // ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1984 '^' (11 pixels wide)
+ 0x04, 0x00, // #
+ 0x0A, 0x00, // # #
+ 0x0A, 0x00, // # #
+ 0x11, 0x00, // # #
+ 0x20, 0x80, // # #
+ 0x20, 0x80, // # #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2016 '_' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0xFF, 0xE0, // ###########
+
+ // @2048 '`' (11 pixels wide)
+ 0x08, 0x00, // #
+ 0x04, 0x00, // #
+ 0x02, 0x00, // #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2080 'a' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0x00, // #####
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x1F, 0x80, // ######
+ 0x31, 0x80, // ## ##
+ 0x33, 0x80, // ## ###
+ 0x1D, 0xC0, // ### ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2112 'b' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x70, 0x00, // ###
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x37, 0x00, // ## ###
+ 0x39, 0x80, // ### ##
+ 0x30, 0xC0, // ## ##
+ 0x30, 0xC0, // ## ##
+ 0x30, 0xC0, // ## ##
+ 0x39, 0x80, // ### ##
+ 0x77, 0x00, // ### ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2144 'c' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1E, 0x80, // #### #
+ 0x31, 0x80, // ## ##
+ 0x60, 0x80, // ## #
+ 0x60, 0x00, // ##
+ 0x60, 0x80, // ## #
+ 0x31, 0x80, // ## ##
+ 0x1F, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2176 'd' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x03, 0x80, // ###
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x1D, 0x80, // ### ##
+ 0x33, 0x80, // ## ###
+ 0x61, 0x80, // ## ##
+ 0x61, 0x80, // ## ##
+ 0x61, 0x80, // ## ##
+ 0x33, 0x80, // ## ###
+ 0x1D, 0xC0, // ### ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2208 'e' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0x00, // #####
+ 0x31, 0x80, // ## ##
+ 0x60, 0xC0, // ## ##
+ 0x7F, 0xC0, // #########
+ 0x60, 0x00, // ##
+ 0x30, 0xC0, // ## ##
+ 0x1F, 0x80, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2240 'f' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x07, 0xE0, // ######
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x3F, 0x80, // #######
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x3F, 0x80, // #######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2272 'g' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1D, 0xC0, // ### ###
+ 0x33, 0x80, // ## ###
+ 0x61, 0x80, // ## ##
+ 0x61, 0x80, // ## ##
+ 0x61, 0x80, // ## ##
+ 0x33, 0x80, // ## ###
+ 0x1D, 0x80, // ### ##
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x1F, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2304 'h' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x70, 0x00, // ###
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x37, 0x00, // ## ###
+ 0x39, 0x80, // ### ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x7B, 0xC0, // #### ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2336 'i' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x00, 0x00, //
+ 0x1E, 0x00, // ####
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x3F, 0xC0, // ########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2368 'j' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x00, 0x00, //
+ 0x3F, 0x00, // ######
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x3E, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2400 'k' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x70, 0x00, // ###
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x37, 0x80, // ## ####
+ 0x36, 0x00, // ## ##
+ 0x3C, 0x00, // ####
+ 0x3C, 0x00, // ####
+ 0x36, 0x00, // ## ##
+ 0x33, 0x00, // ## ##
+ 0x77, 0xC0, // ### #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2432 'l' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x1E, 0x00, // ####
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x3F, 0xC0, // ########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2464 'm' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7F, 0x80, // ########
+ 0x36, 0xC0, // ## ## ##
+ 0x36, 0xC0, // ## ## ##
+ 0x36, 0xC0, // ## ## ##
+ 0x36, 0xC0, // ## ## ##
+ 0x36, 0xC0, // ## ## ##
+ 0x76, 0xE0, // ### ## ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2496 'n' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x77, 0x00, // ### ###
+ 0x39, 0x80, // ### ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x7B, 0xC0, // #### ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2528 'o' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0x00, // #####
+ 0x31, 0x80, // ## ##
+ 0x60, 0xC0, // ## ##
+ 0x60, 0xC0, // ## ##
+ 0x60, 0xC0, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x1F, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2560 'p' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x77, 0x00, // ### ###
+ 0x39, 0x80, // ### ##
+ 0x30, 0xC0, // ## ##
+ 0x30, 0xC0, // ## ##
+ 0x30, 0xC0, // ## ##
+ 0x39, 0x80, // ### ##
+ 0x37, 0x00, // ## ###
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x7C, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2592 'q' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1D, 0xC0, // ### ###
+ 0x33, 0x80, // ## ###
+ 0x61, 0x80, // ## ##
+ 0x61, 0x80, // ## ##
+ 0x61, 0x80, // ## ##
+ 0x33, 0x80, // ## ###
+ 0x1D, 0x80, // ### ##
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x07, 0xC0, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2624 'r' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7B, 0x80, // #### ###
+ 0x1C, 0xC0, // ### ##
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x7F, 0x00, // #######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2656 's' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0x80, // ######
+ 0x31, 0x80, // ## ##
+ 0x3C, 0x00, // ####
+ 0x1F, 0x00, // #####
+ 0x03, 0x80, // ###
+ 0x31, 0x80, // ## ##
+ 0x3F, 0x00, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2688 't' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x7F, 0x00, // #######
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x18, 0x80, // ## #
+ 0x0F, 0x00, // ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2720 'u' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x73, 0x80, // ### ###
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x33, 0x80, // ## ###
+ 0x1D, 0xC0, // ### ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2752 'v' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7B, 0xC0, // #### ####
+ 0x31, 0x80, // ## ##
+ 0x31, 0x80, // ## ##
+ 0x1B, 0x00, // ## ##
+ 0x1B, 0x00, // ## ##
+ 0x0E, 0x00, // ###
+ 0x0E, 0x00, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2784 'w' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0xF1, 0xE0, // #### ####
+ 0x60, 0xC0, // ## ##
+ 0x64, 0xC0, // ## # ##
+ 0x6E, 0xC0, // ## ### ##
+ 0x3B, 0x80, // ### ###
+ 0x3B, 0x80, // ### ###
+ 0x31, 0x80, // ## ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2816 'x' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7B, 0xC0, // #### ####
+ 0x1B, 0x00, // ## ##
+ 0x0E, 0x00, // ###
+ 0x0E, 0x00, // ###
+ 0x0E, 0x00, // ###
+ 0x1B, 0x00, // ## ##
+ 0x7B, 0xC0, // #### ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2848 'y' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x79, 0xE0, // #### ####
+ 0x30, 0xC0, // ## ##
+ 0x19, 0x80, // ## ##
+ 0x19, 0x80, // ## ##
+ 0x0B, 0x00, // # ##
+ 0x0F, 0x00, // ####
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x3E, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2880 'z' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3F, 0x80, // #######
+ 0x21, 0x80, // # ##
+ 0x03, 0x00, // ##
+ 0x0E, 0x00, // ###
+ 0x18, 0x00, // ##
+ 0x30, 0x80, // ## #
+ 0x3F, 0x80, // #######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2912 '{' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x06, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2944 '|' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2976 '}' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x0C, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3008 '~' (11 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x18, 0x00, // ##
+ 0x24, 0x80, // # # #
+ 0x03, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+};
+
+sFONT Font16 = {
+ Font16_Table,
+ 11, /* Width */
+ 16, /* Height */
+};
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Function_Prototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/font20.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,2223 @@
+/**
+ ******************************************************************************
+ * @file font20.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 18-February-2014
+ * @brief This file provides text font20 for STM32xx-EVAL's LCD driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "fonts.h"
+
+/** @addtogroup Utilities
+ * @{
+ */
+
+/** @addtogroup STM32_EVAL
+ * @{
+ */
+
+/** @addtogroup Common
+ * @{
+ */
+
+/** @addtogroup FONTS
+ * @brief This file provides text font20 for STM32xx-EVAL's LCD driver.
+ * @{
+ */
+
+/** @defgroup FONTS_Private_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Variables
+ * @{
+ */
+
+// Character bitmaps for Courier New 15pt
+const uint8_t Font20_Table[] =
+{
+ // @0 ' ' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @40 '!' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x07, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x02, 0x00, // #
+ 0x02, 0x00, // #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x07, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @80 '"' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1C, 0xE0, // ### ###
+ 0x1C, 0xE0, // ### ###
+ 0x1C, 0xE0, // ### ###
+ 0x08, 0x40, // # #
+ 0x08, 0x40, // # #
+ 0x08, 0x40, // # #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @120 '#' (14 pixels wide)
+ 0x0C, 0xC0, // ## ##
+ 0x0C, 0xC0, // ## ##
+ 0x0C, 0xC0, // ## ##
+ 0x0C, 0xC0, // ## ##
+ 0x0C, 0xC0, // ## ##
+ 0x3F, 0xF0, // ##########
+ 0x3F, 0xF0, // ##########
+ 0x0C, 0xC0, // ## ##
+ 0x0C, 0xC0, // ## ##
+ 0x3F, 0xF0, // ##########
+ 0x3F, 0xF0, // ##########
+ 0x0C, 0xC0, // ## ##
+ 0x0C, 0xC0, // ## ##
+ 0x0C, 0xC0, // ## ##
+ 0x0C, 0xC0, // ## ##
+ 0x0C, 0xC0, // ## ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @160 '$' (14 pixels wide)
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x07, 0xE0, // ######
+ 0x0F, 0xE0, // #######
+ 0x18, 0x60, // ## ##
+ 0x18, 0x00, // ##
+ 0x1F, 0x00, // #####
+ 0x0F, 0xC0, // ######
+ 0x00, 0xE0, // ###
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x1F, 0xC0, // #######
+ 0x1F, 0x80, // ######
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @200 '%' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x1C, 0x00, // ###
+ 0x22, 0x00, // # #
+ 0x22, 0x00, // # #
+ 0x22, 0x00, // # #
+ 0x1C, 0x60, // ### ##
+ 0x01, 0xE0, // ####
+ 0x0F, 0x80, // #####
+ 0x3C, 0x00, // ####
+ 0x31, 0xC0, // ## ###
+ 0x02, 0x20, // # #
+ 0x02, 0x20, // # #
+ 0x02, 0x20, // # #
+ 0x01, 0xC0, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @240 '&' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x03, 0xE0, // #####
+ 0x0F, 0xE0, // #######
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x0F, 0x30, // #### ##
+ 0x1F, 0xF0, // #########
+ 0x19, 0xE0, // ## ####
+ 0x18, 0xC0, // ## ##
+ 0x1F, 0xF0, // #########
+ 0x07, 0xB0, // #### ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @280 ''' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x03, 0x80, // ###
+ 0x03, 0x80, // ###
+ 0x03, 0x80, // ###
+ 0x01, 0x00, // #
+ 0x01, 0x00, // #
+ 0x01, 0x00, // #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @320 '(' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @360 ')' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @400 '*' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x1B, 0x60, // ## ## ##
+ 0x1F, 0xE0, // ########
+ 0x07, 0x80, // ####
+ 0x07, 0x80, // ####
+ 0x0F, 0xC0, // ######
+ 0x0C, 0xC0, // ## ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @440 '+' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x3F, 0xF0, // ##########
+ 0x3F, 0xF0, // ##########
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @480 ',' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x03, 0x80, // ###
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x04, 0x00, // #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @520 '-' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3F, 0xE0, // #########
+ 0x3F, 0xE0, // #########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @560 '.' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x03, 0x80, // ###
+ 0x03, 0x80, // ###
+ 0x03, 0x80, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @600 '/' (14 pixels wide)
+ 0x00, 0x60, // ##
+ 0x00, 0x60, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @640 '0' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x0F, 0x80, // #####
+ 0x1F, 0xC0, // #######
+ 0x18, 0xC0, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x18, 0xC0, // ## ##
+ 0x1F, 0xC0, // #######
+ 0x0F, 0x80, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @680 '1' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x03, 0x00, // ##
+ 0x1F, 0x00, // #####
+ 0x1F, 0x00, // #####
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xE0, // ########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @720 '2' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x0F, 0x80, // #####
+ 0x1F, 0xC0, // #######
+ 0x38, 0xE0, // ### ###
+ 0x30, 0x60, // ## ##
+ 0x00, 0x60, // ##
+ 0x00, 0xC0, // ##
+ 0x01, 0x80, // ##
+ 0x03, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x3F, 0xE0, // #########
+ 0x3F, 0xE0, // #########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @760 '3' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x0F, 0x80, // #####
+ 0x3F, 0xC0, // ########
+ 0x30, 0xE0, // ## ###
+ 0x00, 0x60, // ##
+ 0x00, 0xE0, // ###
+ 0x07, 0xC0, // #####
+ 0x07, 0xC0, // #####
+ 0x00, 0xE0, // ###
+ 0x00, 0x60, // ##
+ 0x00, 0x60, // ##
+ 0x60, 0xE0, // ## ###
+ 0x7F, 0xC0, // #########
+ 0x3F, 0x80, // #######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @800 '4' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x01, 0xC0, // ###
+ 0x03, 0xC0, // ####
+ 0x03, 0xC0, // ####
+ 0x06, 0xC0, // ## ##
+ 0x0C, 0xC0, // ## ##
+ 0x0C, 0xC0, // ## ##
+ 0x18, 0xC0, // ## ##
+ 0x30, 0xC0, // ## ##
+ 0x3F, 0xE0, // #########
+ 0x3F, 0xE0, // #########
+ 0x00, 0xC0, // ##
+ 0x03, 0xE0, // #####
+ 0x03, 0xE0, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @840 '5' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x1F, 0xC0, // #######
+ 0x1F, 0xC0, // #######
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x1F, 0x80, // ######
+ 0x1F, 0xC0, // #######
+ 0x18, 0xE0, // ## ###
+ 0x00, 0x60, // ##
+ 0x00, 0x60, // ##
+ 0x00, 0x60, // ##
+ 0x30, 0xE0, // ## ###
+ 0x3F, 0xC0, // ########
+ 0x1F, 0x80, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @880 '6' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x03, 0xE0, // #####
+ 0x0F, 0xE0, // #######
+ 0x1E, 0x00, // ####
+ 0x18, 0x00, // ##
+ 0x38, 0x00, // ###
+ 0x37, 0x80, // ## ####
+ 0x3F, 0xC0, // ########
+ 0x38, 0xE0, // ### ###
+ 0x30, 0x60, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x18, 0xE0, // ## ###
+ 0x1F, 0xC0, // #######
+ 0x07, 0x80, // ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @920 '7' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x3F, 0xE0, // #########
+ 0x3F, 0xE0, // #########
+ 0x30, 0x60, // ## ##
+ 0x00, 0x60, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @960 '8' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x0F, 0x80, // #####
+ 0x1F, 0xC0, // #######
+ 0x38, 0xE0, // ### ###
+ 0x30, 0x60, // ## ##
+ 0x38, 0xE0, // ### ###
+ 0x1F, 0xC0, // #######
+ 0x1F, 0xC0, // #######
+ 0x38, 0xE0, // ### ###
+ 0x30, 0x60, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x38, 0xE0, // ### ###
+ 0x1F, 0xC0, // #######
+ 0x0F, 0x80, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1000 '9' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x0F, 0x00, // ####
+ 0x1F, 0xC0, // #######
+ 0x38, 0xC0, // ### ##
+ 0x30, 0x60, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x38, 0xE0, // ### ###
+ 0x1F, 0xE0, // ########
+ 0x0F, 0x60, // #### ##
+ 0x00, 0xE0, // ###
+ 0x00, 0xC0, // ##
+ 0x03, 0xC0, // ####
+ 0x3F, 0x80, // #######
+ 0x3E, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1040 ':' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x03, 0x80, // ###
+ 0x03, 0x80, // ###
+ 0x03, 0x80, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x03, 0x80, // ###
+ 0x03, 0x80, // ###
+ 0x03, 0x80, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1080 ';' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x01, 0xC0, // ###
+ 0x01, 0xC0, // ###
+ 0x01, 0xC0, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x03, 0x80, // ###
+ 0x03, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x04, 0x00, // #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1120 '<' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x30, // ##
+ 0x00, 0xF0, // ####
+ 0x03, 0xC0, // ####
+ 0x07, 0x00, // ###
+ 0x1C, 0x00, // ###
+ 0x78, 0x00, // ####
+ 0x1C, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x03, 0xC0, // ####
+ 0x00, 0xF0, // ####
+ 0x00, 0x30, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1160 '=' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7F, 0xF0, // ###########
+ 0x7F, 0xF0, // ###########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7F, 0xF0, // ###########
+ 0x7F, 0xF0, // ###########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1200 '>' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x30, 0x00, // ##
+ 0x3C, 0x00, // ####
+ 0x0F, 0x00, // ####
+ 0x03, 0x80, // ###
+ 0x00, 0xE0, // ###
+ 0x00, 0x78, // ####
+ 0x00, 0xE0, // ###
+ 0x03, 0x80, // ###
+ 0x0F, 0x00, // ####
+ 0x3C, 0x00, // ####
+ 0x30, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1240 '?' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x0F, 0x80, // #####
+ 0x1F, 0xC0, // #######
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x00, 0x60, // ##
+ 0x01, 0xC0, // ###
+ 0x03, 0x80, // ###
+ 0x03, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x07, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1280 '@' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x03, 0x80, // ###
+ 0x0C, 0x80, // ## #
+ 0x08, 0x40, // # #
+ 0x10, 0x40, // # #
+ 0x10, 0x40, // # #
+ 0x11, 0xC0, // # ###
+ 0x12, 0x40, // # # #
+ 0x12, 0x40, // # # #
+ 0x12, 0x40, // # # #
+ 0x11, 0xC0, // # ###
+ 0x10, 0x00, // #
+ 0x08, 0x00, // #
+ 0x08, 0x40, // # #
+ 0x07, 0x80, // ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1320 'A' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0x80, // ######
+ 0x1F, 0x80, // ######
+ 0x03, 0x80, // ###
+ 0x06, 0xC0, // ## ##
+ 0x06, 0xC0, // ## ##
+ 0x0C, 0xC0, // ## ##
+ 0x0C, 0x60, // ## ##
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xE0, // ########
+ 0x30, 0x30, // ## ##
+ 0x78, 0x78, // #### ####
+ 0x78, 0x78, // #### ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1360 'B' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3F, 0x80, // #######
+ 0x3F, 0xC0, // ########
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0xE0, // ## ###
+ 0x1F, 0xC0, // #######
+ 0x1F, 0xE0, // ########
+ 0x18, 0x70, // ## ###
+ 0x18, 0x30, // ## ##
+ 0x18, 0x30, // ## ##
+ 0x3F, 0xF0, // ##########
+ 0x3F, 0xE0, // #########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1400 'C' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x07, 0xB0, // #### ##
+ 0x0F, 0xF0, // ########
+ 0x1C, 0x70, // ### ###
+ 0x38, 0x30, // ### ##
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x38, 0x30, // ### ##
+ 0x1C, 0x70, // ### ###
+ 0x0F, 0xE0, // #######
+ 0x07, 0xC0, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1440 'D' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7F, 0x80, // ########
+ 0x7F, 0xC0, // #########
+ 0x30, 0xE0, // ## ###
+ 0x30, 0x70, // ## ###
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x70, // ## ###
+ 0x30, 0xE0, // ## ###
+ 0x7F, 0xC0, // #########
+ 0x7F, 0x80, // ########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1480 'E' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3F, 0xF0, // ##########
+ 0x3F, 0xF0, // ##########
+ 0x18, 0x30, // ## ##
+ 0x18, 0x30, // ## ##
+ 0x19, 0x80, // ## ##
+ 0x1F, 0x80, // ######
+ 0x1F, 0x80, // ######
+ 0x19, 0x80, // ## ##
+ 0x18, 0x30, // ## ##
+ 0x18, 0x30, // ## ##
+ 0x3F, 0xF0, // ##########
+ 0x3F, 0xF0, // ##########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1520 'F' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3F, 0xF0, // ##########
+ 0x3F, 0xF0, // ##########
+ 0x18, 0x30, // ## ##
+ 0x18, 0x30, // ## ##
+ 0x19, 0x80, // ## ##
+ 0x1F, 0x80, // ######
+ 0x1F, 0x80, // ######
+ 0x19, 0x80, // ## ##
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x3F, 0x00, // ######
+ 0x3F, 0x00, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1560 'G' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x07, 0xB0, // #### ##
+ 0x1F, 0xF0, // #########
+ 0x18, 0x70, // ## ###
+ 0x30, 0x30, // ## ##
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x31, 0xF8, // ## ######
+ 0x31, 0xF8, // ## ######
+ 0x30, 0x30, // ## ##
+ 0x18, 0x30, // ## ##
+ 0x1F, 0xF0, // #########
+ 0x07, 0xC0, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1600 'H' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3C, 0xF0, // #### ####
+ 0x3C, 0xF0, // #### ####
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xE0, // ########
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x3C, 0xF0, // #### ####
+ 0x3C, 0xF0, // #### ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1640 'I' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xE0, // ########
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xE0, // ########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1680 'J' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x03, 0xF8, // #######
+ 0x03, 0xF8, // #######
+ 0x00, 0x60, // ##
+ 0x00, 0x60, // ##
+ 0x00, 0x60, // ##
+ 0x00, 0x60, // ##
+ 0x30, 0x60, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x30, 0xE0, // ## ###
+ 0x3F, 0xC0, // ########
+ 0x0F, 0x80, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1720 'K' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3E, 0xF8, // ##### #####
+ 0x3E, 0xF8, // ##### #####
+ 0x18, 0xE0, // ## ###
+ 0x19, 0x80, // ## ##
+ 0x1B, 0x00, // ## ##
+ 0x1F, 0x00, // #####
+ 0x1D, 0x80, // ### ##
+ 0x18, 0xC0, // ## ##
+ 0x18, 0xC0, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x3E, 0x78, // ##### ####
+ 0x3E, 0x38, // ##### ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1760 'L' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3F, 0x00, // ######
+ 0x3F, 0x00, // ######
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x30, // ## ##
+ 0x0C, 0x30, // ## ##
+ 0x0C, 0x30, // ## ##
+ 0x3F, 0xF0, // ##########
+ 0x3F, 0xF0, // ##########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1800 'M' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x78, 0x78, // #### ####
+ 0x78, 0x78, // #### ####
+ 0x38, 0x70, // ### ###
+ 0x3C, 0xF0, // #### ####
+ 0x34, 0xB0, // ## # # ##
+ 0x37, 0xB0, // ## #### ##
+ 0x37, 0xB0, // ## #### ##
+ 0x33, 0x30, // ## ## ##
+ 0x33, 0x30, // ## ## ##
+ 0x30, 0x30, // ## ##
+ 0x7C, 0xF8, // ##### #####
+ 0x7C, 0xF8, // ##### #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1840 'N' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x39, 0xF0, // ### #####
+ 0x3D, 0xF0, // #### #####
+ 0x1C, 0x60, // ### ##
+ 0x1E, 0x60, // #### ##
+ 0x1E, 0x60, // #### ##
+ 0x1B, 0x60, // ## ## ##
+ 0x1B, 0x60, // ## ## ##
+ 0x19, 0xE0, // ## ####
+ 0x19, 0xE0, // ## ####
+ 0x18, 0xE0, // ## ###
+ 0x3E, 0xE0, // ##### ###
+ 0x3E, 0x60, // ##### ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1880 'O' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x07, 0x80, // ####
+ 0x0F, 0xC0, // ######
+ 0x1C, 0xE0, // ### ###
+ 0x38, 0x70, // ### ###
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x38, 0x70, // ### ###
+ 0x1C, 0xE0, // ### ###
+ 0x0F, 0xC0, // ######
+ 0x07, 0x80, // ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1920 'P' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3F, 0xC0, // ########
+ 0x3F, 0xE0, // #########
+ 0x18, 0x70, // ## ###
+ 0x18, 0x30, // ## ##
+ 0x18, 0x30, // ## ##
+ 0x18, 0x70, // ## ###
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xC0, // #######
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x3F, 0x00, // ######
+ 0x3F, 0x00, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @1960 'Q' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x07, 0x80, // ####
+ 0x0F, 0xC0, // ######
+ 0x1C, 0xE0, // ### ###
+ 0x38, 0x70, // ### ###
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x38, 0x70, // ### ###
+ 0x1C, 0xE0, // ### ###
+ 0x0F, 0xC0, // ######
+ 0x07, 0x80, // ####
+ 0x07, 0xB0, // #### ##
+ 0x0F, 0xF0, // ########
+ 0x0C, 0xE0, // ## ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2000 'R' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3F, 0xC0, // ########
+ 0x3F, 0xE0, // #########
+ 0x18, 0x70, // ## ###
+ 0x18, 0x30, // ## ##
+ 0x18, 0x70, // ## ###
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xC0, // #######
+ 0x18, 0xE0, // ## ###
+ 0x18, 0x60, // ## ##
+ 0x18, 0x70, // ## ###
+ 0x3E, 0x38, // ##### ###
+ 0x3E, 0x18, // ##### ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2040 'S' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x0F, 0xB0, // ##### ##
+ 0x1F, 0xF0, // #########
+ 0x38, 0x70, // ### ###
+ 0x30, 0x30, // ## ##
+ 0x38, 0x00, // ###
+ 0x1F, 0x80, // ######
+ 0x07, 0xE0, // ######
+ 0x00, 0x70, // ###
+ 0x30, 0x30, // ## ##
+ 0x38, 0x70, // ### ###
+ 0x3F, 0xE0, // #########
+ 0x37, 0xC0, // ## #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2080 'T' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3F, 0xF0, // ##########
+ 0x3F, 0xF0, // ##########
+ 0x33, 0x30, // ## ## ##
+ 0x33, 0x30, // ## ## ##
+ 0x33, 0x30, // ## ## ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x0F, 0xC0, // ######
+ 0x0F, 0xC0, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2120 'U' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3C, 0xF0, // #### ####
+ 0x3C, 0xF0, // #### ####
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x1C, 0xE0, // ### ###
+ 0x0F, 0xC0, // ######
+ 0x07, 0x80, // ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2160 'V' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x78, 0xF0, // #### ####
+ 0x78, 0xF0, // #### ####
+ 0x30, 0x60, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x18, 0xC0, // ## ##
+ 0x18, 0xC0, // ## ##
+ 0x0D, 0x80, // ## ##
+ 0x0D, 0x80, // ## ##
+ 0x0D, 0x80, // ## ##
+ 0x07, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2200 'W' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7C, 0x7C, // ##### #####
+ 0x7C, 0x7C, // ##### #####
+ 0x30, 0x18, // ## ##
+ 0x33, 0x98, // ## ### ##
+ 0x33, 0x98, // ## ### ##
+ 0x33, 0x98, // ## ### ##
+ 0x36, 0xD8, // ## ## ## ##
+ 0x16, 0xD0, // # ## ## #
+ 0x1C, 0x70, // ### ###
+ 0x1C, 0x70, // ### ###
+ 0x1C, 0x70, // ### ###
+ 0x18, 0x30, // ## ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2240 'X' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x78, 0xF0, // #### ####
+ 0x78, 0xF0, // #### ####
+ 0x30, 0x60, // ## ##
+ 0x18, 0xC0, // ## ##
+ 0x0D, 0x80, // ## ##
+ 0x07, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x0D, 0x80, // ## ##
+ 0x18, 0xC0, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x78, 0xF0, // #### ####
+ 0x78, 0xF0, // #### ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2280 'Y' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3C, 0xF0, // #### ####
+ 0x3C, 0xF0, // #### ####
+ 0x18, 0x60, // ## ##
+ 0x0C, 0xC0, // ## ##
+ 0x07, 0x80, // ####
+ 0x07, 0x80, // ####
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x0F, 0xC0, // ######
+ 0x0F, 0xC0, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2320 'Z' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xE0, // ########
+ 0x18, 0x60, // ## ##
+ 0x18, 0xC0, // ## ##
+ 0x01, 0x80, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x0C, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xE0, // ########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2360 '[' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x03, 0xC0, // ####
+ 0x03, 0xC0, // ####
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0xC0, // ####
+ 0x03, 0xC0, // ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2400 '\' (14 pixels wide)
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x01, 0x80, // ##
+ 0x01, 0x80, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0x60, // ##
+ 0x00, 0x60, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2440 ']' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x0F, 0x00, // ####
+ 0x0F, 0x00, // ####
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x0F, 0x00, // ####
+ 0x0F, 0x00, // ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2480 '^' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x02, 0x00, // #
+ 0x07, 0x00, // ###
+ 0x0D, 0x80, // ## ##
+ 0x18, 0xC0, // ## ##
+ 0x30, 0x60, // ## ##
+ 0x20, 0x20, // # #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2520 '_' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0xFF, 0xFC, // ##############
+ 0xFF, 0xFC, // ##############
+
+ // @2560 '`' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x04, 0x00, // #
+ 0x03, 0x00, // ##
+ 0x00, 0x80, // #
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2600 'a' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x0F, 0xC0, // ######
+ 0x1F, 0xE0, // ########
+ 0x00, 0x60, // ##
+ 0x0F, 0xE0, // #######
+ 0x1F, 0xE0, // ########
+ 0x38, 0x60, // ### ##
+ 0x30, 0xE0, // ## ###
+ 0x3F, 0xF0, // ##########
+ 0x1F, 0x70, // ##### ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2640 'b' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x70, 0x00, // ###
+ 0x70, 0x00, // ###
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x37, 0x80, // ## ####
+ 0x3F, 0xE0, // #########
+ 0x38, 0x60, // ### ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x38, 0x60, // ### ##
+ 0x7F, 0xE0, // ##########
+ 0x77, 0x80, // ### ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2680 'c' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x07, 0xB0, // #### ##
+ 0x1F, 0xF0, // #########
+ 0x18, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x38, 0x30, // ### ##
+ 0x1F, 0xF0, // #########
+ 0x0F, 0xC0, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2720 'd' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x70, // ###
+ 0x00, 0x70, // ###
+ 0x00, 0x30, // ##
+ 0x00, 0x30, // ##
+ 0x07, 0xB0, // #### ##
+ 0x1F, 0xF0, // #########
+ 0x18, 0x70, // ## ###
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x38, 0x70, // ### ###
+ 0x1F, 0xF8, // ##########
+ 0x07, 0xB8, // #### ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2760 'e' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x07, 0x80, // ####
+ 0x1F, 0xE0, // ########
+ 0x18, 0x60, // ## ##
+ 0x3F, 0xF0, // ##########
+ 0x3F, 0xF0, // ##########
+ 0x30, 0x00, // ##
+ 0x18, 0x30, // ## ##
+ 0x1F, 0xF0, // #########
+ 0x07, 0xC0, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2800 'f' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x03, 0xF0, // ######
+ 0x07, 0xF0, // #######
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xE0, // ########
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xE0, // ########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2840 'g' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x07, 0xB8, // #### ###
+ 0x1F, 0xF8, // ##########
+ 0x18, 0x70, // ## ###
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x18, 0x70, // ## ###
+ 0x1F, 0xF0, // #########
+ 0x07, 0xB0, // #### ##
+ 0x00, 0x30, // ##
+ 0x00, 0x70, // ###
+ 0x0F, 0xE0, // #######
+ 0x0F, 0xC0, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2880 'h' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x38, 0x00, // ###
+ 0x38, 0x00, // ###
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x1B, 0xC0, // ## ####
+ 0x1F, 0xE0, // ########
+ 0x1C, 0x60, // ### ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x3C, 0xF0, // #### ####
+ 0x3C, 0xF0, // #### ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2920 'i' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0x00, // #####
+ 0x1F, 0x00, // #####
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xE0, // ########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @2960 'j' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0xC0, // #######
+ 0x1F, 0xC0, // #######
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x00, 0xC0, // ##
+ 0x01, 0xC0, // ###
+ 0x3F, 0x80, // #######
+ 0x3F, 0x00, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3000 'k' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x38, 0x00, // ###
+ 0x38, 0x00, // ###
+ 0x18, 0x00, // ##
+ 0x18, 0x00, // ##
+ 0x1B, 0xE0, // ## #####
+ 0x1B, 0xE0, // ## #####
+ 0x1B, 0x00, // ## ##
+ 0x1E, 0x00, // ####
+ 0x1E, 0x00, // ####
+ 0x1B, 0x00, // ## ##
+ 0x19, 0x80, // ## ##
+ 0x39, 0xF0, // ### #####
+ 0x39, 0xF0, // ### #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3040 'l' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x1F, 0x00, // #####
+ 0x1F, 0x00, // #####
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xE0, // ########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3080 'm' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x7E, 0xE0, // ###### ###
+ 0x7F, 0xF0, // ###########
+ 0x33, 0x30, // ## ## ##
+ 0x33, 0x30, // ## ## ##
+ 0x33, 0x30, // ## ## ##
+ 0x33, 0x30, // ## ## ##
+ 0x33, 0x30, // ## ## ##
+ 0x7B, 0xB8, // #### ### ###
+ 0x7B, 0xB8, // #### ### ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3120 'n' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3B, 0xC0, // ### ####
+ 0x3F, 0xE0, // #########
+ 0x1C, 0x60, // ### ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x3C, 0xF0, // #### ####
+ 0x3C, 0xF0, // #### ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3160 'o' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x07, 0x80, // ####
+ 0x1F, 0xE0, // ########
+ 0x18, 0x60, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x1F, 0xE0, // ########
+ 0x07, 0x80, // ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3200 'p' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x77, 0x80, // ### ####
+ 0x7F, 0xE0, // ##########
+ 0x38, 0x60, // ### ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x38, 0x60, // ### ##
+ 0x3F, 0xE0, // #########
+ 0x37, 0x80, // ## ####
+ 0x30, 0x00, // ##
+ 0x30, 0x00, // ##
+ 0x7C, 0x00, // #####
+ 0x7C, 0x00, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3240 'q' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x07, 0xB8, // #### ###
+ 0x1F, 0xF8, // ##########
+ 0x18, 0x70, // ## ###
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x30, 0x30, // ## ##
+ 0x18, 0x70, // ## ###
+ 0x1F, 0xF0, // #########
+ 0x07, 0xB0, // #### ##
+ 0x00, 0x30, // ##
+ 0x00, 0x30, // ##
+ 0x00, 0xF8, // #####
+ 0x00, 0xF8, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3280 'r' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3C, 0xE0, // #### ###
+ 0x3D, 0xF0, // #### #####
+ 0x0F, 0x30, // #### ##
+ 0x0E, 0x00, // ###
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x3F, 0xC0, // ########
+ 0x3F, 0xC0, // ########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3320 's' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x07, 0xE0, // ######
+ 0x1F, 0xE0, // ########
+ 0x18, 0x60, // ## ##
+ 0x1E, 0x00, // ####
+ 0x0F, 0xC0, // ######
+ 0x01, 0xE0, // ####
+ 0x18, 0x60, // ## ##
+ 0x1F, 0xE0, // ########
+ 0x1F, 0x80, // ######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3360 't' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x3F, 0xE0, // #########
+ 0x3F, 0xE0, // #########
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x0C, 0x30, // ## ##
+ 0x0F, 0xF0, // ########
+ 0x07, 0xC0, // #####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3400 'u' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x38, 0xE0, // ### ###
+ 0x38, 0xE0, // ### ###
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0x60, // ## ##
+ 0x18, 0xE0, // ## ###
+ 0x1F, 0xF0, // #########
+ 0x0F, 0x70, // #### ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3440 'v' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x78, 0xF0, // #### ####
+ 0x78, 0xF0, // #### ####
+ 0x30, 0x60, // ## ##
+ 0x18, 0xC0, // ## ##
+ 0x18, 0xC0, // ## ##
+ 0x0D, 0x80, // ## ##
+ 0x0D, 0x80, // ## ##
+ 0x07, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3480 'w' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x78, 0xF0, // #### ####
+ 0x78, 0xF0, // #### ####
+ 0x32, 0x60, // ## # ##
+ 0x32, 0x60, // ## # ##
+ 0x37, 0xE0, // ## ######
+ 0x1D, 0xC0, // ### ###
+ 0x1D, 0xC0, // ### ###
+ 0x18, 0xC0, // ## ##
+ 0x18, 0xC0, // ## ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3520 'x' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x3C, 0xF0, // #### ####
+ 0x3C, 0xF0, // #### ####
+ 0x0C, 0xC0, // ## ##
+ 0x07, 0x80, // ####
+ 0x03, 0x00, // ##
+ 0x07, 0x80, // ####
+ 0x0C, 0xC0, // ## ##
+ 0x3C, 0xF0, // #### ####
+ 0x3C, 0xF0, // #### ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3560 'y' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x78, 0xF0, // #### ####
+ 0x78, 0xF0, // #### ####
+ 0x30, 0x60, // ## ##
+ 0x18, 0xC0, // ## ##
+ 0x18, 0xC0, // ## ##
+ 0x0D, 0x80, // ## ##
+ 0x0F, 0x80, // #####
+ 0x07, 0x00, // ###
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x0C, 0x00, // ##
+ 0x7F, 0x00, // #######
+ 0x7F, 0x00, // #######
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3600 'z' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xE0, // ########
+ 0x18, 0xC0, // ## ##
+ 0x01, 0x80, // ##
+ 0x03, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x0C, 0x60, // ## ##
+ 0x1F, 0xE0, // ########
+ 0x1F, 0xE0, // ########
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3640 '{' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x01, 0xC0, // ###
+ 0x03, 0xC0, // ####
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x07, 0x00, // ###
+ 0x0E, 0x00, // ###
+ 0x07, 0x00, // ###
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0xC0, // ####
+ 0x01, 0xC0, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3680 '|' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x03, 0x00, // ##
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3720 '}' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x1C, 0x00, // ###
+ 0x1E, 0x00, // ####
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x07, 0x00, // ###
+ 0x03, 0x80, // ###
+ 0x07, 0x00, // ###
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x06, 0x00, // ##
+ 0x1E, 0x00, // ####
+ 0x1C, 0x00, // ###
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+
+ // @3760 '~' (14 pixels wide)
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x0E, 0x00, // ###
+ 0x3F, 0x30, // ###### ##
+ 0x33, 0xF0, // ## ######
+ 0x01, 0xE0, // ####
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+ 0x00, 0x00, //
+};
+
+
+sFONT Font20 = {
+ Font20_Table,
+ 14, /* Width */
+ 20, /* Height */
+};
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Function_Prototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/font24.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,2600 @@
+/**
+ ******************************************************************************
+ * @file font24.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 18-February-2014
+ * @brief This file provides text font24 for STM32xx-EVAL's LCD driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "fonts.h"
+
+/** @addtogroup Utilities
+ * @{
+ */
+
+/** @addtogroup STM32_EVAL
+ * @{
+ */
+
+/** @addtogroup Common
+ * @{
+ */
+
+/** @addtogroup FONTS
+ * @brief This file provides text font24 for STM32xx-EVAL's LCD driver.
+ * @{
+ */
+
+/** @defgroup FONTS_Private_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Variables
+ * @{
+ */
+const uint8_t Font24_Table [] =
+{
+ // @0 ' ' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @72 '!' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x01, 0x00, 0x00, // #
+ 0x01, 0x00, 0x00, // #
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @144 '"' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x0E, 0x70, 0x00, // ### ###
+ 0x0E, 0x70, 0x00, // ### ###
+ 0x0E, 0x70, 0x00, // ### ###
+ 0x04, 0x20, 0x00, // # #
+ 0x04, 0x20, 0x00, // # #
+ 0x04, 0x20, 0x00, // # #
+ 0x04, 0x20, 0x00, // # #
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @216 '#' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x06, 0x60, 0x00, // ## ##
+ 0x06, 0x60, 0x00, // ## ##
+ 0x06, 0x60, 0x00, // ## ##
+ 0x06, 0x60, 0x00, // ## ##
+ 0x06, 0x60, 0x00, // ## ##
+ 0x3F, 0xF8, 0x00, // ###########
+ 0x3F, 0xF8, 0x00, // ###########
+ 0x06, 0x60, 0x00, // ## ##
+ 0x0C, 0xC0, 0x00, // ## ##
+ 0x3F, 0xF8, 0x00, // ###########
+ 0x3F, 0xF8, 0x00, // ###########
+ 0x0C, 0xC0, 0x00, // ## ##
+ 0x0C, 0xC0, 0x00, // ## ##
+ 0x0C, 0xC0, 0x00, // ## ##
+ 0x0C, 0xC0, 0x00, // ## ##
+ 0x0C, 0xC0, 0x00, // ## ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @288 '$' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x07, 0xB0, 0x00, // #### ##
+ 0x0F, 0xF0, 0x00, // ########
+ 0x18, 0x70, 0x00, // ## ###
+ 0x18, 0x70, 0x00, // ## ###
+ 0x1C, 0x00, 0x00, // ###
+ 0x0F, 0x80, 0x00, // #####
+ 0x07, 0xE0, 0x00, // ######
+ 0x00, 0xF0, 0x00, // ####
+ 0x18, 0x30, 0x00, // ## ##
+ 0x1C, 0x30, 0x00, // ### ##
+ 0x1C, 0x70, 0x00, // ### ###
+ 0x1F, 0xE0, 0x00, // ########
+ 0x1B, 0xC0, 0x00, // ## ####
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @360 '%' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x07, 0x80, 0x00, // ####
+ 0x0F, 0xC0, 0x00, // ######
+ 0x1C, 0xE0, 0x00, // ### ###
+ 0x18, 0x60, 0x00, // ## ##
+ 0x18, 0x60, 0x00, // ## ##
+ 0x1C, 0xE0, 0x00, // ### ###
+ 0x0F, 0xF8, 0x00, // #########
+ 0x07, 0xE0, 0x00, // ######
+ 0x1F, 0xF0, 0x00, // #########
+ 0x07, 0x38, 0x00, // ### ###
+ 0x06, 0x18, 0x00, // ## ##
+ 0x06, 0x18, 0x00, // ## ##
+ 0x07, 0x38, 0x00, // ### ###
+ 0x03, 0xF0, 0x00, // ######
+ 0x01, 0xE0, 0x00, // ####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @432 '&' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0xF0, 0x00, // ######
+ 0x07, 0xF0, 0x00, // #######
+ 0x0C, 0x60, 0x00, // ## ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x07, 0x00, 0x00, // ###
+ 0x0F, 0x9C, 0x00, // ##### ###
+ 0x1D, 0xFC, 0x00, // ### #######
+ 0x18, 0xF0, 0x00, // ## ####
+ 0x18, 0x70, 0x00, // ## ###
+ 0x0F, 0xFC, 0x00, // ##########
+ 0x07, 0xDC, 0x00, // ##### ###
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @504 ''' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x01, 0x00, 0x00, // #
+ 0x01, 0x00, 0x00, // #
+ 0x01, 0x00, 0x00, // #
+ 0x01, 0x00, 0x00, // #
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @576 '(' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x38, 0x00, // ###
+ 0x00, 0x70, 0x00, // ###
+ 0x00, 0xF0, 0x00, // ####
+ 0x00, 0xE0, 0x00, // ###
+ 0x00, 0xE0, 0x00, // ###
+ 0x01, 0xC0, 0x00, // ###
+ 0x01, 0xC0, 0x00, // ###
+ 0x01, 0xC0, 0x00, // ###
+ 0x01, 0xC0, 0x00, // ###
+ 0x01, 0xC0, 0x00, // ###
+ 0x01, 0xC0, 0x00, // ###
+ 0x00, 0xE0, 0x00, // ###
+ 0x00, 0xE0, 0x00, // ###
+ 0x00, 0x70, 0x00, // ###
+ 0x00, 0x70, 0x00, // ###
+ 0x00, 0x38, 0x00, // ###
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @648 ')' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x18, 0x00, 0x00, // ##
+ 0x1C, 0x00, 0x00, // ###
+ 0x0E, 0x00, 0x00, // ###
+ 0x0E, 0x00, 0x00, // ###
+ 0x07, 0x00, 0x00, // ###
+ 0x07, 0x00, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x07, 0x00, 0x00, // ###
+ 0x07, 0x00, 0x00, // ###
+ 0x0F, 0x00, 0x00, // ####
+ 0x0E, 0x00, 0x00, // ###
+ 0x1C, 0x00, 0x00, // ###
+ 0x18, 0x00, 0x00, // ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @720 '*' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x1D, 0xB8, 0x00, // ### ## ###
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x07, 0xE0, 0x00, // ######
+ 0x03, 0xC0, 0x00, // ####
+ 0x03, 0xC0, 0x00, // ####
+ 0x06, 0x60, 0x00, // ## ##
+ 0x06, 0x60, 0x00, // ## ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @792 '+' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x3F, 0xFC, 0x00, // ############
+ 0x3F, 0xFC, 0x00, // ############
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @864 ',' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0xE0, 0x00, // ###
+ 0x00, 0xC0, 0x00, // ##
+ 0x01, 0xC0, 0x00, // ###
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x03, 0x00, 0x00, // ##
+ 0x03, 0x00, 0x00, // ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @936 '-' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @1008 '.' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0xC0, 0x00, // ####
+ 0x03, 0xC0, 0x00, // ####
+ 0x03, 0xC0, 0x00, // ####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @1080 '/' (17 pixels wide)
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x38, 0x00, // ###
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x70, 0x00, // ###
+ 0x00, 0x60, 0x00, // ##
+ 0x00, 0x60, 0x00, // ##
+ 0x00, 0xC0, 0x00, // ##
+ 0x00, 0xC0, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x03, 0x00, 0x00, // ##
+ 0x03, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x0E, 0x00, 0x00, // ###
+ 0x0C, 0x00, 0x00, // ##
+ 0x1C, 0x00, 0x00, // ###
+ 0x18, 0x00, 0x00, // ##
+ 0x18, 0x00, 0x00, // ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @1152 '0' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0xC0, 0x00, // ####
+ 0x07, 0xE0, 0x00, // ######
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x07, 0xE0, 0x00, // ######
+ 0x03, 0xC0, 0x00, // ####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @1224 '1' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x80, 0x00, // #
+ 0x07, 0x80, 0x00, // ####
+ 0x1F, 0x80, 0x00, // ######
+ 0x1D, 0x80, 0x00, // ### ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @1296 '2' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x07, 0xC0, 0x00, // #####
+ 0x1F, 0xF0, 0x00, // #########
+ 0x38, 0x30, 0x00, // ### ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x60, 0x00, // ##
+ 0x01, 0xC0, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x06, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x18, 0x00, 0x00, // ##
+ 0x3F, 0xF8, 0x00, // ###########
+ 0x3F, 0xF8, 0x00, // ###########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @1368 '3' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0xC0, 0x00, // ####
+ 0x0F, 0xE0, 0x00, // #######
+ 0x0C, 0x70, 0x00, // ## ###
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x60, 0x00, // ##
+ 0x03, 0xC0, 0x00, // ####
+ 0x03, 0xE0, 0x00, // #####
+ 0x00, 0x70, 0x00, // ###
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x18, 0x00, // ##
+ 0x18, 0x38, 0x00, // ## ###
+ 0x1F, 0xF0, 0x00, // #########
+ 0x0F, 0xC0, 0x00, // ######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @1440 '4' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0xE0, 0x00, // ###
+ 0x01, 0xE0, 0x00, // ####
+ 0x01, 0xE0, 0x00, // ####
+ 0x03, 0x60, 0x00, // ## ##
+ 0x06, 0x60, 0x00, // ## ##
+ 0x06, 0x60, 0x00, // ## ##
+ 0x0C, 0x60, 0x00, // ## ##
+ 0x0C, 0x60, 0x00, // ## ##
+ 0x18, 0x60, 0x00, // ## ##
+ 0x30, 0x60, 0x00, // ## ##
+ 0x3F, 0xF8, 0x00, // ###########
+ 0x3F, 0xF8, 0x00, // ###########
+ 0x00, 0x60, 0x00, // ##
+ 0x03, 0xF8, 0x00, // #######
+ 0x03, 0xF8, 0x00, // #######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @1512 '5' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x1F, 0xF0, 0x00, // #########
+ 0x1F, 0xF0, 0x00, // #########
+ 0x18, 0x00, 0x00, // ##
+ 0x18, 0x00, 0x00, // ##
+ 0x18, 0x00, 0x00, // ##
+ 0x1B, 0xC0, 0x00, // ## ####
+ 0x1F, 0xF0, 0x00, // #########
+ 0x1C, 0x30, 0x00, // ### ##
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x18, 0x00, // ##
+ 0x30, 0x30, 0x00, // ## ##
+ 0x3F, 0xF0, 0x00, // ##########
+ 0x0F, 0xC0, 0x00, // ######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @1584 '6' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0xF8, 0x00, // #####
+ 0x03, 0xF8, 0x00, // #######
+ 0x07, 0x00, 0x00, // ###
+ 0x0E, 0x00, 0x00, // ###
+ 0x0C, 0x00, 0x00, // ##
+ 0x18, 0x00, 0x00, // ##
+ 0x1B, 0xC0, 0x00, // ## ####
+ 0x1F, 0xF0, 0x00, // #########
+ 0x1C, 0x30, 0x00, // ### ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x0C, 0x38, 0x00, // ## ###
+ 0x0F, 0xF0, 0x00, // ########
+ 0x03, 0xE0, 0x00, // #####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @1656 '7' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x38, 0x00, // ## ###
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x70, 0x00, // ###
+ 0x00, 0x60, 0x00, // ##
+ 0x00, 0x60, 0x00, // ##
+ 0x00, 0xE0, 0x00, // ###
+ 0x00, 0xC0, 0x00, // ##
+ 0x00, 0xC0, 0x00, // ##
+ 0x01, 0xC0, 0x00, // ###
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @1728 '8' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x07, 0xE0, 0x00, // ######
+ 0x0F, 0xF0, 0x00, // ########
+ 0x1C, 0x38, 0x00, // ### ###
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x07, 0xE0, 0x00, // ######
+ 0x07, 0xE0, 0x00, // ######
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x1C, 0x38, 0x00, // ### ###
+ 0x0F, 0xF0, 0x00, // ########
+ 0x07, 0xE0, 0x00, // ######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @1800 '9' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x07, 0xC0, 0x00, // #####
+ 0x0F, 0xF0, 0x00, // ########
+ 0x1C, 0x30, 0x00, // ### ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x0C, 0x38, 0x00, // ## ###
+ 0x0F, 0xF8, 0x00, // #########
+ 0x03, 0xD8, 0x00, // #### ##
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x70, 0x00, // ###
+ 0x00, 0xE0, 0x00, // ###
+ 0x1F, 0xC0, 0x00, // #######
+ 0x1F, 0x00, 0x00, // #####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @1872 ':' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0xC0, 0x00, // ####
+ 0x03, 0xC0, 0x00, // ####
+ 0x03, 0xC0, 0x00, // ####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0xC0, 0x00, // ####
+ 0x03, 0xC0, 0x00, // ####
+ 0x03, 0xC0, 0x00, // ####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @1944 ';' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0xF0, 0x00, // ####
+ 0x00, 0xF0, 0x00, // ####
+ 0x00, 0xF0, 0x00, // ####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0xE0, 0x00, // ###
+ 0x01, 0xC0, 0x00, // ###
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x03, 0x00, 0x00, // ##
+ 0x02, 0x00, 0x00, // #
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @2016 '<' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x1C, 0x00, // ###
+ 0x00, 0x3C, 0x00, // ####
+ 0x00, 0xF0, 0x00, // ####
+ 0x03, 0xC0, 0x00, // ####
+ 0x0F, 0x00, 0x00, // ####
+ 0x3C, 0x00, 0x00, // ####
+ 0xF0, 0x00, 0x00, // ####
+ 0x3C, 0x00, 0x00, // ####
+ 0x0F, 0x00, 0x00, // ####
+ 0x03, 0xC0, 0x00, // ####
+ 0x00, 0xF0, 0x00, // ####
+ 0x00, 0x3C, 0x00, // ####
+ 0x00, 0x1C, 0x00, // ###
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @2088 '=' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7F, 0xFC, 0x00, // #############
+ 0x7F, 0xFC, 0x00, // #############
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7F, 0xFC, 0x00, // #############
+ 0x7F, 0xFC, 0x00, // #############
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @2160 '>' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x70, 0x00, 0x00, // ###
+ 0x78, 0x00, 0x00, // ####
+ 0x1E, 0x00, 0x00, // ####
+ 0x07, 0x80, 0x00, // ####
+ 0x01, 0xE0, 0x00, // ####
+ 0x00, 0x78, 0x00, // ####
+ 0x00, 0x1E, 0x00, // ####
+ 0x00, 0x78, 0x00, // ####
+ 0x01, 0xE0, 0x00, // ####
+ 0x07, 0x80, 0x00, // ####
+ 0x1E, 0x00, 0x00, // ####
+ 0x78, 0x00, 0x00, // ####
+ 0x70, 0x00, 0x00, // ###
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @2232 '?' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x07, 0xC0, 0x00, // #####
+ 0x0F, 0xE0, 0x00, // #######
+ 0x18, 0x70, 0x00, // ## ###
+ 0x18, 0x30, 0x00, // ## ##
+ 0x18, 0x30, 0x00, // ## ##
+ 0x00, 0x70, 0x00, // ###
+ 0x00, 0xE0, 0x00, // ###
+ 0x03, 0xC0, 0x00, // ####
+ 0x03, 0x80, 0x00, // ###
+ 0x03, 0x00, 0x00, // ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x07, 0x00, 0x00, // ###
+ 0x07, 0x00, 0x00, // ###
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @2304 '@' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0xE0, 0x00, // #####
+ 0x07, 0xF0, 0x00, // #######
+ 0x0E, 0x38, 0x00, // ### ###
+ 0x0C, 0x18, 0x00, // ## ##
+ 0x18, 0x78, 0x00, // ## ####
+ 0x18, 0xF8, 0x00, // ## #####
+ 0x19, 0xD8, 0x00, // ## ### ##
+ 0x19, 0x98, 0x00, // ## ## ##
+ 0x19, 0x98, 0x00, // ## ## ##
+ 0x19, 0x98, 0x00, // ## ## ##
+ 0x18, 0xF8, 0x00, // ## #####
+ 0x18, 0x78, 0x00, // ## ####
+ 0x18, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0E, 0x18, 0x00, // ### ##
+ 0x07, 0xF8, 0x00, // ########
+ 0x03, 0xE0, 0x00, // #####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @2376 'A' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x1F, 0x80, 0x00, // ######
+ 0x1F, 0xC0, 0x00, // #######
+ 0x01, 0xC0, 0x00, // ###
+ 0x03, 0x60, 0x00, // ## ##
+ 0x03, 0x60, 0x00, // ## ##
+ 0x06, 0x30, 0x00, // ## ##
+ 0x06, 0x30, 0x00, // ## ##
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x0F, 0xF8, 0x00, // #########
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0xFC, 0x7F, 0x00, // ###### #######
+ 0xFC, 0x7F, 0x00, // ###### #######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @2448 'B' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7F, 0xE0, 0x00, // ##########
+ 0x7F, 0xF0, 0x00, // ###########
+ 0x18, 0x38, 0x00, // ## ###
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x38, 0x00, // ## ###
+ 0x1F, 0xF0, 0x00, // #########
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x18, 0x1C, 0x00, // ## ###
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x7F, 0xF8, 0x00, // ############
+ 0x7F, 0xF0, 0x00, // ###########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @2520 'C' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0xEC, 0x00, // ##### ##
+ 0x0F, 0xFC, 0x00, // ##########
+ 0x1C, 0x1C, 0x00, // ### ###
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x30, 0x00, 0x00, // ##
+ 0x30, 0x00, 0x00, // ##
+ 0x30, 0x00, 0x00, // ##
+ 0x30, 0x00, 0x00, // ##
+ 0x30, 0x00, 0x00, // ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x1C, 0x1C, 0x00, // ### ###
+ 0x0F, 0xF8, 0x00, // #########
+ 0x03, 0xF0, 0x00, // ######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @2592 'D' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7F, 0xC0, 0x00, // #########
+ 0x7F, 0xF0, 0x00, // ###########
+ 0x18, 0x38, 0x00, // ## ###
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x38, 0x00, // ## ###
+ 0x7F, 0xF0, 0x00, // ###########
+ 0x7F, 0xE0, 0x00, // ##########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @2664 'E' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7F, 0xF8, 0x00, // ############
+ 0x7F, 0xF8, 0x00, // ############
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x19, 0x98, 0x00, // ## ## ##
+ 0x19, 0x80, 0x00, // ## ##
+ 0x1F, 0x80, 0x00, // ######
+ 0x1F, 0x80, 0x00, // ######
+ 0x19, 0x80, 0x00, // ## ##
+ 0x19, 0x98, 0x00, // ## ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x7F, 0xF8, 0x00, // ############
+ 0x7F, 0xF8, 0x00, // ############
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @2736 'F' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x3F, 0xFC, 0x00, // ############
+ 0x3F, 0xFC, 0x00, // ############
+ 0x0C, 0x0C, 0x00, // ## ##
+ 0x0C, 0x0C, 0x00, // ## ##
+ 0x0C, 0xCC, 0x00, // ## ## ##
+ 0x0C, 0xC0, 0x00, // ## ##
+ 0x0F, 0xC0, 0x00, // ######
+ 0x0F, 0xC0, 0x00, // ######
+ 0x0C, 0xC0, 0x00, // ## ##
+ 0x0C, 0xC0, 0x00, // ## ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x3F, 0xC0, 0x00, // ########
+ 0x3F, 0xC0, 0x00, // ########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @2808 'G' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0xEC, 0x00, // ##### ##
+ 0x0F, 0xFC, 0x00, // ##########
+ 0x1C, 0x1C, 0x00, // ### ###
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x30, 0x00, 0x00, // ##
+ 0x30, 0x00, 0x00, // ##
+ 0x30, 0xFE, 0x00, // ## #######
+ 0x30, 0xFE, 0x00, // ## #######
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x38, 0x0C, 0x00, // ### ##
+ 0x1C, 0x1C, 0x00, // ### ###
+ 0x0F, 0xFC, 0x00, // ##########
+ 0x03, 0xF0, 0x00, // ######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @2880 'H' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7E, 0x7E, 0x00, // ###### ######
+ 0x7E, 0x7E, 0x00, // ###### ######
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x7E, 0x7E, 0x00, // ###### ######
+ 0x7E, 0x7E, 0x00, // ###### ######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @2952 'I' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @3024 'J' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x07, 0xFE, 0x00, // ##########
+ 0x07, 0xFE, 0x00, // ##########
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x30, 0x30, 0x00, // ## ##
+ 0x30, 0x30, 0x00, // ## ##
+ 0x30, 0x30, 0x00, // ## ##
+ 0x30, 0x30, 0x00, // ## ##
+ 0x30, 0x60, 0x00, // ## ##
+ 0x3F, 0xE0, 0x00, // #########
+ 0x0F, 0x80, 0x00, // #####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @3096 'K' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7F, 0x3E, 0x00, // ####### #####
+ 0x7F, 0x3E, 0x00, // ####### #####
+ 0x18, 0x30, 0x00, // ## ##
+ 0x18, 0x60, 0x00, // ## ##
+ 0x18, 0xC0, 0x00, // ## ##
+ 0x19, 0x80, 0x00, // ## ##
+ 0x1B, 0x80, 0x00, // ## ###
+ 0x1F, 0xC0, 0x00, // #######
+ 0x1C, 0xE0, 0x00, // ### ###
+ 0x18, 0x70, 0x00, // ## ###
+ 0x18, 0x30, 0x00, // ## ##
+ 0x18, 0x38, 0x00, // ## ###
+ 0x7F, 0x1F, 0x00, // ####### #####
+ 0x7F, 0x1F, 0x00, // ####### #####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @3168 'L' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7F, 0x80, 0x00, // ########
+ 0x7F, 0x80, 0x00, // ########
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x0C, 0x00, // ## ##
+ 0x0C, 0x0C, 0x00, // ## ##
+ 0x0C, 0x0C, 0x00, // ## ##
+ 0x0C, 0x0C, 0x00, // ## ##
+ 0x7F, 0xFC, 0x00, // #############
+ 0x7F, 0xFC, 0x00, // #############
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @3240 'M' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0xF0, 0x0F, 0x00, // #### ####
+ 0xF8, 0x1F, 0x00, // ##### #####
+ 0x38, 0x1C, 0x00, // ### ###
+ 0x3C, 0x3C, 0x00, // #### ####
+ 0x3C, 0x3C, 0x00, // #### ####
+ 0x36, 0x6C, 0x00, // ## ## ## ##
+ 0x36, 0x6C, 0x00, // ## ## ## ##
+ 0x33, 0xCC, 0x00, // ## #### ##
+ 0x33, 0xCC, 0x00, // ## #### ##
+ 0x31, 0x8C, 0x00, // ## ## ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0xFE, 0x7F, 0x00, // ####### #######
+ 0xFE, 0x7F, 0x00, // ####### #######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @3312 'N' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x78, 0xFE, 0x00, // #### #######
+ 0x78, 0xFE, 0x00, // #### #######
+ 0x1C, 0x18, 0x00, // ### ##
+ 0x1E, 0x18, 0x00, // #### ##
+ 0x1F, 0x18, 0x00, // ##### ##
+ 0x1B, 0x18, 0x00, // ## ## ##
+ 0x1B, 0x98, 0x00, // ## ### ##
+ 0x19, 0xD8, 0x00, // ## ### ##
+ 0x18, 0xD8, 0x00, // ## ## ##
+ 0x18, 0xF8, 0x00, // ## #####
+ 0x18, 0x78, 0x00, // ## ####
+ 0x18, 0x38, 0x00, // ## ###
+ 0x7F, 0x18, 0x00, // ####### ##
+ 0x7F, 0x18, 0x00, // ####### ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @3384 'O' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0xC0, 0x00, // ####
+ 0x0F, 0xF0, 0x00, // ########
+ 0x1C, 0x38, 0x00, // ### ###
+ 0x18, 0x18, 0x00, // ## ##
+ 0x38, 0x1C, 0x00, // ### ###
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x38, 0x1C, 0x00, // ### ###
+ 0x18, 0x18, 0x00, // ## ##
+ 0x1C, 0x38, 0x00, // ### ###
+ 0x0F, 0xF0, 0x00, // ########
+ 0x03, 0xC0, 0x00, // ####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @3456 'P' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x3F, 0xF0, 0x00, // ##########
+ 0x3F, 0xF8, 0x00, // ###########
+ 0x0C, 0x1C, 0x00, // ## ###
+ 0x0C, 0x0C, 0x00, // ## ##
+ 0x0C, 0x0C, 0x00, // ## ##
+ 0x0C, 0x0C, 0x00, // ## ##
+ 0x0C, 0x18, 0x00, // ## ##
+ 0x0F, 0xF8, 0x00, // #########
+ 0x0F, 0xE0, 0x00, // #######
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x3F, 0xC0, 0x00, // ########
+ 0x3F, 0xC0, 0x00, // ########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @3528 'Q' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0xC0, 0x00, // ####
+ 0x0F, 0xF0, 0x00, // ########
+ 0x1C, 0x38, 0x00, // ### ###
+ 0x18, 0x18, 0x00, // ## ##
+ 0x38, 0x1C, 0x00, // ### ###
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x38, 0x1C, 0x00, // ### ###
+ 0x18, 0x18, 0x00, // ## ##
+ 0x1C, 0x38, 0x00, // ### ###
+ 0x0F, 0xF0, 0x00, // ########
+ 0x07, 0xC0, 0x00, // #####
+ 0x07, 0xCC, 0x00, // ##### ##
+ 0x0F, 0xFC, 0x00, // ##########
+ 0x0C, 0x38, 0x00, // ## ###
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @3600 'R' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7F, 0xE0, 0x00, // ##########
+ 0x7F, 0xF0, 0x00, // ###########
+ 0x18, 0x38, 0x00, // ## ###
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x38, 0x00, // ## ###
+ 0x1F, 0xF0, 0x00, // #########
+ 0x1F, 0xC0, 0x00, // #######
+ 0x18, 0xE0, 0x00, // ## ###
+ 0x18, 0x70, 0x00, // ## ###
+ 0x18, 0x30, 0x00, // ## ##
+ 0x18, 0x38, 0x00, // ## ###
+ 0x7F, 0x1E, 0x00, // ####### ####
+ 0x7F, 0x0E, 0x00, // ####### ###
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @3672 'S' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x07, 0xD8, 0x00, // ##### ##
+ 0x0F, 0xF8, 0x00, // #########
+ 0x1C, 0x38, 0x00, // ### ###
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x1E, 0x00, 0x00, // ####
+ 0x0F, 0xC0, 0x00, // ######
+ 0x03, 0xF0, 0x00, // ######
+ 0x00, 0x78, 0x00, // ####
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x1C, 0x38, 0x00, // ### ###
+ 0x1F, 0xF0, 0x00, // #########
+ 0x1B, 0xE0, 0x00, // ## #####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @3744 'T' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x3F, 0xFC, 0x00, // ############
+ 0x3F, 0xFC, 0x00, // ############
+ 0x31, 0x8C, 0x00, // ## ## ##
+ 0x31, 0x8C, 0x00, // ## ## ##
+ 0x31, 0x8C, 0x00, // ## ## ##
+ 0x31, 0x8C, 0x00, // ## ## ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x0F, 0xF0, 0x00, // ########
+ 0x0F, 0xF0, 0x00, // ########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @3816 'U' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7E, 0x7E, 0x00, // ###### ######
+ 0x7E, 0x7E, 0x00, // ###### ######
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x0F, 0xF0, 0x00, // ########
+ 0x03, 0xC0, 0x00, // ####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @3888 'V' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7F, 0x7F, 0x00, // ####### #######
+ 0x7F, 0x7F, 0x00, // ####### #######
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x0C, 0x18, 0x00, // ## ##
+ 0x0C, 0x18, 0x00, // ## ##
+ 0x0C, 0x18, 0x00, // ## ##
+ 0x06, 0x30, 0x00, // ## ##
+ 0x06, 0x30, 0x00, // ## ##
+ 0x03, 0x60, 0x00, // ## ##
+ 0x03, 0x60, 0x00, // ## ##
+ 0x03, 0x60, 0x00, // ## ##
+ 0x01, 0xC0, 0x00, // ###
+ 0x01, 0xC0, 0x00, // ###
+ 0x00, 0x80, 0x00, // #
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @3960 'W' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0xFE, 0x3F, 0x80, // ####### #######
+ 0xFE, 0x3F, 0x80, // ####### #######
+ 0x30, 0x06, 0x00, // ## ##
+ 0x30, 0x06, 0x00, // ## ##
+ 0x30, 0x86, 0x00, // ## # ##
+ 0x19, 0xCC, 0x00, // ## ### ##
+ 0x19, 0xCC, 0x00, // ## ### ##
+ 0x1B, 0x6C, 0x00, // ## ## ## ##
+ 0x1B, 0x6C, 0x00, // ## ## ## ##
+ 0x1E, 0x7C, 0x00, // #### #####
+ 0x0E, 0x38, 0x00, // ### ###
+ 0x0E, 0x38, 0x00, // ### ###
+ 0x0C, 0x18, 0x00, // ## ##
+ 0x0C, 0x18, 0x00, // ## ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @4032 'X' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7E, 0x7E, 0x00, // ###### ######
+ 0x7E, 0x7E, 0x00, // ###### ######
+ 0x18, 0x18, 0x00, // ## ##
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x06, 0x60, 0x00, // ## ##
+ 0x03, 0xC0, 0x00, // ####
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x03, 0xC0, 0x00, // ####
+ 0x06, 0x60, 0x00, // ## ##
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x7E, 0x7E, 0x00, // ###### ######
+ 0x7E, 0x7E, 0x00, // ###### ######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @4104 'Y' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7C, 0x7E, 0x00, // ##### ######
+ 0x7C, 0x7E, 0x00, // ##### ######
+ 0x18, 0x18, 0x00, // ## ##
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x06, 0x60, 0x00, // ## ##
+ 0x06, 0x60, 0x00, // ## ##
+ 0x03, 0xC0, 0x00, // ####
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x0F, 0xF0, 0x00, // ########
+ 0x0F, 0xF0, 0x00, // ########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @4176 'Z' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x30, 0x00, // ## ##
+ 0x18, 0x60, 0x00, // ## ##
+ 0x18, 0xC0, 0x00, // ## ##
+ 0x01, 0x80, 0x00, // ##
+ 0x03, 0x00, 0x00, // ##
+ 0x06, 0x18, 0x00, // ## ##
+ 0x0C, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x3F, 0xF8, 0x00, // ###########
+ 0x3F, 0xF8, 0x00, // ###########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @4248 '[' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x01, 0xF0, 0x00, // #####
+ 0x01, 0xF0, 0x00, // #####
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0xF0, 0x00, // #####
+ 0x01, 0xF0, 0x00, // #####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @4320 '\' (17 pixels wide)
+ 0x18, 0x00, 0x00, // ##
+ 0x18, 0x00, 0x00, // ##
+ 0x1C, 0x00, 0x00, // ###
+ 0x0C, 0x00, 0x00, // ##
+ 0x0E, 0x00, 0x00, // ###
+ 0x06, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x03, 0x00, 0x00, // ##
+ 0x03, 0x00, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x00, 0xC0, 0x00, // ##
+ 0x00, 0xC0, 0x00, // ##
+ 0x00, 0x60, 0x00, // ##
+ 0x00, 0x60, 0x00, // ##
+ 0x00, 0x70, 0x00, // ###
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x38, 0x00, // ###
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @4392 ']' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x0F, 0x80, 0x00, // #####
+ 0x0F, 0x80, 0x00, // #####
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x0F, 0x80, 0x00, // #####
+ 0x0F, 0x80, 0x00, // #####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @4464 '^' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x80, 0x00, // #
+ 0x01, 0xC0, 0x00, // ###
+ 0x03, 0xE0, 0x00, // #####
+ 0x07, 0x70, 0x00, // ### ###
+ 0x06, 0x30, 0x00, // ## ##
+ 0x0C, 0x18, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x10, 0x04, 0x00, // # #
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @4536 '_' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0xFF, 0xFF, 0x00, // ################
+ 0xFF, 0xFF, 0x00, // ################
+
+ // @4608 '`' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x03, 0x00, 0x00, // ##
+ 0x03, 0x80, 0x00, // ###
+ 0x00, 0xE0, 0x00, // ###
+ 0x00, 0x60, 0x00, // ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @4680 'a' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x0F, 0xC0, 0x00, // ######
+ 0x1F, 0xE0, 0x00, // ########
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x07, 0xF0, 0x00, // #######
+ 0x1F, 0xF0, 0x00, // #########
+ 0x38, 0x30, 0x00, // ### ##
+ 0x30, 0x30, 0x00, // ## ##
+ 0x30, 0x70, 0x00, // ## ###
+ 0x1F, 0xFC, 0x00, // ###########
+ 0x0F, 0xBC, 0x00, // ##### ####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @4752 'b' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x78, 0x00, 0x00, // ####
+ 0x78, 0x00, 0x00, // ####
+ 0x18, 0x00, 0x00, // ##
+ 0x18, 0x00, 0x00, // ##
+ 0x1B, 0xE0, 0x00, // ## #####
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x1C, 0x18, 0x00, // ### ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x1C, 0x18, 0x00, // ### ##
+ 0x7F, 0xF8, 0x00, // ############
+ 0x7B, 0xE0, 0x00, // #### #####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @4824 'c' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0xEC, 0x00, // ##### ##
+ 0x0F, 0xFC, 0x00, // ##########
+ 0x1C, 0x1C, 0x00, // ### ###
+ 0x38, 0x0C, 0x00, // ### ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x30, 0x00, 0x00, // ##
+ 0x30, 0x00, 0x00, // ##
+ 0x38, 0x0C, 0x00, // ### ##
+ 0x1C, 0x1C, 0x00, // ### ###
+ 0x0F, 0xF8, 0x00, // #########
+ 0x03, 0xF0, 0x00, // ######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @4896 'd' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x78, 0x00, // ####
+ 0x00, 0x78, 0x00, // ####
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x18, 0x00, // ##
+ 0x07, 0xD8, 0x00, // ##### ##
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x18, 0x38, 0x00, // ## ###
+ 0x30, 0x18, 0x00, // ## ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x18, 0x38, 0x00, // ## ###
+ 0x1F, 0xFE, 0x00, // ############
+ 0x07, 0xDE, 0x00, // ##### ####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @4968 'e' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x07, 0xE0, 0x00, // ######
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x18, 0x18, 0x00, // ## ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x3F, 0xFC, 0x00, // ############
+ 0x3F, 0xFC, 0x00, // ############
+ 0x30, 0x00, 0x00, // ##
+ 0x30, 0x00, 0x00, // ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x1F, 0xFC, 0x00, // ###########
+ 0x07, 0xF0, 0x00, // #######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @5040 'f' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x01, 0xFC, 0x00, // #######
+ 0x03, 0xFC, 0x00, // ########
+ 0x06, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x3F, 0xF8, 0x00, // ###########
+ 0x3F, 0xF8, 0x00, // ###########
+ 0x06, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x3F, 0xF0, 0x00, // ##########
+ 0x3F, 0xF0, 0x00, // ##########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @5112 'g' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x07, 0xDE, 0x00, // ##### ####
+ 0x1F, 0xFE, 0x00, // ############
+ 0x18, 0x38, 0x00, // ## ###
+ 0x30, 0x18, 0x00, // ## ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x18, 0x38, 0x00, // ## ###
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x07, 0xD8, 0x00, // ##### ##
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x38, 0x00, // ###
+ 0x0F, 0xF0, 0x00, // ########
+ 0x0F, 0xC0, 0x00, // ######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @5184 'h' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x78, 0x00, 0x00, // ####
+ 0x78, 0x00, 0x00, // ####
+ 0x18, 0x00, 0x00, // ##
+ 0x18, 0x00, 0x00, // ##
+ 0x1B, 0xE0, 0x00, // ## #####
+ 0x1F, 0xF0, 0x00, // #########
+ 0x1C, 0x38, 0x00, // ### ###
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x7E, 0x7E, 0x00, // ###### ######
+ 0x7E, 0x7E, 0x00, // ###### ######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @5256 'i' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x1F, 0x80, 0x00, // ######
+ 0x1F, 0x80, 0x00, // ######
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x3F, 0xFC, 0x00, // ############
+ 0x3F, 0xFC, 0x00, // ############
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @5328 'j' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0xC0, 0x00, // ##
+ 0x00, 0xC0, 0x00, // ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x1F, 0xF0, 0x00, // #########
+ 0x1F, 0xF0, 0x00, // #########
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x30, 0x00, // ##
+ 0x00, 0x70, 0x00, // ###
+ 0x1F, 0xE0, 0x00, // ########
+ 0x1F, 0x80, 0x00, // ######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @5400 'k' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x3C, 0x00, 0x00, // ####
+ 0x3C, 0x00, 0x00, // ####
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0xF8, 0x00, // ## #####
+ 0x0C, 0xF8, 0x00, // ## #####
+ 0x0C, 0xC0, 0x00, // ## ##
+ 0x0D, 0x80, 0x00, // ## ##
+ 0x0F, 0x80, 0x00, // #####
+ 0x0F, 0x00, 0x00, // ####
+ 0x0F, 0x80, 0x00, // #####
+ 0x0D, 0xC0, 0x00, // ## ###
+ 0x0C, 0xE0, 0x00, // ## ###
+ 0x3C, 0x7C, 0x00, // #### #####
+ 0x3C, 0x7C, 0x00, // #### #####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @5472 'l' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x1F, 0x80, 0x00, // ######
+ 0x1F, 0x80, 0x00, // ######
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x3F, 0xFC, 0x00, // ############
+ 0x3F, 0xFC, 0x00, // ############
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @5544 'm' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0xF7, 0x78, 0x00, // #### ### ####
+ 0xFF, 0xFC, 0x00, // ##############
+ 0x39, 0xCC, 0x00, // ### ### ##
+ 0x31, 0x8C, 0x00, // ## ## ##
+ 0x31, 0x8C, 0x00, // ## ## ##
+ 0x31, 0x8C, 0x00, // ## ## ##
+ 0x31, 0x8C, 0x00, // ## ## ##
+ 0x31, 0x8C, 0x00, // ## ## ##
+ 0x31, 0x8C, 0x00, // ## ## ##
+ 0xFD, 0xEF, 0x00, // ###### #### ####
+ 0xFD, 0xEF, 0x00, // ###### #### ####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @5616 'n' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7B, 0xE0, 0x00, // #### #####
+ 0x7F, 0xF0, 0x00, // ###########
+ 0x1C, 0x38, 0x00, // ### ###
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x7E, 0x7E, 0x00, // ###### ######
+ 0x7E, 0x7E, 0x00, // ###### ######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @5688 'o' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x03, 0xC0, 0x00, // ####
+ 0x0F, 0xF0, 0x00, // ########
+ 0x1C, 0x38, 0x00, // ### ###
+ 0x38, 0x1C, 0x00, // ### ###
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x30, 0x0C, 0x00, // ## ##
+ 0x38, 0x1C, 0x00, // ### ###
+ 0x1C, 0x38, 0x00, // ### ###
+ 0x0F, 0xF0, 0x00, // ########
+ 0x03, 0xC0, 0x00, // ####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @5760 'p' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7B, 0xE0, 0x00, // #### #####
+ 0x7F, 0xF8, 0x00, // ############
+ 0x1C, 0x18, 0x00, // ### ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x1C, 0x18, 0x00, // ### ##
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x1B, 0xE0, 0x00, // ## #####
+ 0x18, 0x00, 0x00, // ##
+ 0x18, 0x00, 0x00, // ##
+ 0x18, 0x00, 0x00, // ##
+ 0x7F, 0x00, 0x00, // #######
+ 0x7F, 0x00, 0x00, // #######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @5832 'q' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x07, 0xDE, 0x00, // ##### ####
+ 0x1F, 0xFE, 0x00, // ############
+ 0x18, 0x38, 0x00, // ## ###
+ 0x30, 0x18, 0x00, // ## ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x30, 0x18, 0x00, // ## ##
+ 0x18, 0x38, 0x00, // ## ###
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x07, 0xD8, 0x00, // ##### ##
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0x18, 0x00, // ##
+ 0x00, 0xFE, 0x00, // #######
+ 0x00, 0xFE, 0x00, // #######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @5904 'r' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x3E, 0x78, 0x00, // ##### ####
+ 0x3E, 0xFC, 0x00, // ##### ######
+ 0x07, 0xCC, 0x00, // ##### ##
+ 0x07, 0x00, 0x00, // ###
+ 0x06, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x06, 0x00, 0x00, // ##
+ 0x3F, 0xF0, 0x00, // ##########
+ 0x3F, 0xF0, 0x00, // ##########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @5976 's' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x07, 0xF8, 0x00, // ########
+ 0x0F, 0xF8, 0x00, // #########
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x1F, 0x80, 0x00, // ######
+ 0x0F, 0xF0, 0x00, // ########
+ 0x00, 0xF8, 0x00, // #####
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x38, 0x00, // ## ###
+ 0x1F, 0xF0, 0x00, // #########
+ 0x1F, 0xE0, 0x00, // ########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @6048 't' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x3F, 0xF0, 0x00, // ##########
+ 0x3F, 0xF0, 0x00, // ##########
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x00, 0x00, // ##
+ 0x0C, 0x1C, 0x00, // ## ###
+ 0x07, 0xFC, 0x00, // #########
+ 0x03, 0xF0, 0x00, // ######
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @6120 'u' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x78, 0x78, 0x00, // #### ####
+ 0x78, 0x78, 0x00, // #### ####
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x38, 0x00, // ## ###
+ 0x0F, 0xFE, 0x00, // ###########
+ 0x07, 0xDE, 0x00, // ##### ####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @6192 'v' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7C, 0x3E, 0x00, // ##### #####
+ 0x7C, 0x3E, 0x00, // ##### #####
+ 0x18, 0x18, 0x00, // ## ##
+ 0x18, 0x18, 0x00, // ## ##
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x06, 0x60, 0x00, // ## ##
+ 0x06, 0x60, 0x00, // ## ##
+ 0x07, 0xE0, 0x00, // ######
+ 0x03, 0xC0, 0x00, // ####
+ 0x03, 0xC0, 0x00, // ####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @6264 'w' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x78, 0x3C, 0x00, // #### ####
+ 0x78, 0x3C, 0x00, // #### ####
+ 0x31, 0x18, 0x00, // ## # ##
+ 0x33, 0x98, 0x00, // ## ### ##
+ 0x33, 0x98, 0x00, // ## ### ##
+ 0x1A, 0xB0, 0x00, // ## # # ##
+ 0x1E, 0xF0, 0x00, // #### ####
+ 0x1E, 0xF0, 0x00, // #### ####
+ 0x1C, 0x60, 0x00, // ### ##
+ 0x0C, 0x60, 0x00, // ## ##
+ 0x0C, 0x60, 0x00, // ## ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @6336 'x' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x3E, 0x7C, 0x00, // ##### #####
+ 0x3E, 0x7C, 0x00, // ##### #####
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x06, 0x60, 0x00, // ## ##
+ 0x03, 0xC0, 0x00, // ####
+ 0x01, 0x80, 0x00, // ##
+ 0x03, 0xC0, 0x00, // ####
+ 0x06, 0x60, 0x00, // ## ##
+ 0x0C, 0x30, 0x00, // ## ##
+ 0x3E, 0x7C, 0x00, // ##### #####
+ 0x3E, 0x7C, 0x00, // ##### #####
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @6408 'y' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x7E, 0x1F, 0x00, // ###### #####
+ 0x7E, 0x1F, 0x00, // ###### #####
+ 0x18, 0x0C, 0x00, // ## ##
+ 0x0C, 0x18, 0x00, // ## ##
+ 0x0C, 0x18, 0x00, // ## ##
+ 0x06, 0x30, 0x00, // ## ##
+ 0x06, 0x30, 0x00, // ## ##
+ 0x03, 0x60, 0x00, // ## ##
+ 0x03, 0xE0, 0x00, // #####
+ 0x01, 0xC0, 0x00, // ###
+ 0x00, 0xC0, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x03, 0x00, 0x00, // ##
+ 0x3F, 0xC0, 0x00, // ########
+ 0x3F, 0xC0, 0x00, // ########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @6480 'z' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x18, 0x30, 0x00, // ## ##
+ 0x18, 0x60, 0x00, // ## ##
+ 0x00, 0xC0, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x03, 0x00, 0x00, // ##
+ 0x06, 0x18, 0x00, // ## ##
+ 0x0C, 0x18, 0x00, // ## ##
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x1F, 0xF8, 0x00, // ##########
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @6552 '{' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0xE0, 0x00, // ###
+ 0x01, 0xE0, 0x00, // ####
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x03, 0x80, 0x00, // ###
+ 0x07, 0x00, 0x00, // ###
+ 0x03, 0x80, 0x00, // ###
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0xE0, 0x00, // ####
+ 0x00, 0xE0, 0x00, // ###
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @6624 '|' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @6696 '}' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x07, 0x00, 0x00, // ###
+ 0x07, 0x80, 0x00, // ####
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0xC0, 0x00, // ###
+ 0x00, 0xE0, 0x00, // ###
+ 0x01, 0xC0, 0x00, // ###
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x01, 0x80, 0x00, // ##
+ 0x07, 0x80, 0x00, // ####
+ 0x07, 0x00, 0x00, // ###
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+
+ // @6768 '~' (17 pixels wide)
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x0E, 0x00, 0x00, // ###
+ 0x1F, 0x18, 0x00, // ##### ##
+ 0x3B, 0xB8, 0x00, // ### ### ###
+ 0x31, 0xF0, 0x00, // ## #####
+ 0x00, 0xE0, 0x00, // ###
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+ 0x00, 0x00, 0x00, //
+};
+
+sFONT Font24 = {
+ Font24_Table,
+ 17, /* Width */
+ 24, /* Height */
+};
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Function_Prototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/font8.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,1084 @@
+/**
+ ******************************************************************************
+ * @file Font8.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 18-February-2014
+ * @brief This file provides text Font8 for STM32xx-EVAL's LCD driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "fonts.h"
+
+/** @addtogroup Utilities
+ * @{
+ */
+
+/** @addtogroup STM32_EVAL
+ * @{
+ */
+
+/** @addtogroup Common
+ * @{
+ */
+
+/** @addtogroup FONTS
+ * @brief This file provides text Font8 for STM32xx-EVAL's LCD driver.
+ * @{
+ */
+
+/** @defgroup FONTS_Private_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Variables
+ * @{
+ */
+//
+// Font data for Courier New 12pt
+//
+
+const uint8_t Font8_Table[] =
+{
+ // @0 ' ' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @8 '!' (5 pixels wide)
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x00, //
+ 0x20, // #
+ 0x00, //
+ 0x00, //
+
+ // @16 '"' (5 pixels wide)
+ 0x50, // # #
+ 0x50, // # #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @24 '#' (5 pixels wide)
+ 0x28, // # #
+ 0x50, // # #
+ 0xF8, // #####
+ 0x50, // # #
+ 0xF8, // #####
+ 0x50, // # #
+ 0xA0, // # #
+ 0x00, //
+
+ // @32 '$' (5 pixels wide)
+ 0x20, // #
+ 0x30, // ##
+ 0x60, // ##
+ 0x30, // ##
+ 0x10, // #
+ 0x60, // ##
+ 0x20, // #
+ 0x00, //
+
+ // @40 '%' (5 pixels wide)
+ 0x20, // #
+ 0x20, // #
+ 0x18, // ##
+ 0x60, // ##
+ 0x10, // #
+ 0x10, // #
+ 0x00, //
+ 0x00, //
+
+ // @48 '&' (5 pixels wide)
+ 0x00, //
+ 0x38, // ###
+ 0x20, // #
+ 0x60, // ##
+ 0x50, // # #
+ 0x78, // ####
+ 0x00, //
+ 0x00, //
+
+ // @56 ''' (5 pixels wide)
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @64 '(' (5 pixels wide)
+ 0x10, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x10, // #
+ 0x00, //
+
+ // @72 ')' (5 pixels wide)
+ 0x40, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x40, // #
+ 0x00, //
+
+ // @80 '*' (5 pixels wide)
+ 0x20, // #
+ 0x70, // ###
+ 0x20, // #
+ 0x50, // # #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @88 '+' (5 pixels wide)
+ 0x00, //
+ 0x20, // #
+ 0x20, // #
+ 0xF8, // #####
+ 0x20, // #
+ 0x20, // #
+ 0x00, //
+ 0x00, //
+
+ // @96 ',' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x10, // #
+ 0x20, // #
+ 0x20, // #
+ 0x00, //
+
+ // @104 '-' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @112 '.' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x20, // #
+ 0x00, //
+ 0x00, //
+
+ // @120 '/' (5 pixels wide)
+ 0x10, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x40, // #
+ 0x40, // #
+ 0x80, // #
+ 0x00, //
+
+ // @128 '0' (5 pixels wide)
+ 0x20, // #
+ 0x50, // # #
+ 0x50, // # #
+ 0x50, // # #
+ 0x50, // # #
+ 0x20, // #
+ 0x00, //
+ 0x00, //
+
+ // @136 '1' (5 pixels wide)
+ 0x60, // ##
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0xF8, // #####
+ 0x00, //
+ 0x00, //
+
+ // @144 '2' (5 pixels wide)
+ 0x20, // #
+ 0x50, // # #
+ 0x20, // #
+ 0x20, // #
+ 0x40, // #
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+
+ // @152 '3' (5 pixels wide)
+ 0x20, // #
+ 0x50, // # #
+ 0x10, // #
+ 0x20, // #
+ 0x10, // #
+ 0x60, // ##
+ 0x00, //
+ 0x00, //
+
+ // @160 '4' (5 pixels wide)
+ 0x10, // #
+ 0x30, // ##
+ 0x50, // # #
+ 0x78, // ####
+ 0x10, // #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+
+ // @168 '5' (5 pixels wide)
+ 0x70, // ###
+ 0x40, // #
+ 0x60, // ##
+ 0x10, // #
+ 0x50, // # #
+ 0x20, // #
+ 0x00, //
+ 0x00, //
+
+ // @176 '6' (5 pixels wide)
+ 0x30, // ##
+ 0x40, // #
+ 0x60, // ##
+ 0x50, // # #
+ 0x50, // # #
+ 0x60, // ##
+ 0x00, //
+ 0x00, //
+
+ // @184 '7' (5 pixels wide)
+ 0x70, // ###
+ 0x50, // # #
+ 0x10, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x00, //
+ 0x00, //
+
+ // @192 '8' (5 pixels wide)
+ 0x20, // #
+ 0x50, // # #
+ 0x20, // #
+ 0x50, // # #
+ 0x50, // # #
+ 0x20, // #
+ 0x00, //
+ 0x00, //
+
+ // @200 '9' (5 pixels wide)
+ 0x30, // ##
+ 0x50, // # #
+ 0x50, // # #
+ 0x30, // ##
+ 0x10, // #
+ 0x60, // ##
+ 0x00, //
+ 0x00, //
+
+ // @208 ':' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x20, // #
+ 0x00, //
+ 0x00, //
+ 0x20, // #
+ 0x00, //
+ 0x00, //
+
+ // @216 ';' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x10, // #
+ 0x00, //
+ 0x10, // #
+ 0x20, // #
+ 0x00, //
+ 0x00, //
+
+ // @224 '<' (5 pixels wide)
+ 0x00, //
+ 0x10, // #
+ 0x20, // #
+ 0xC0, // ##
+ 0x20, // #
+ 0x10, // #
+ 0x00, //
+ 0x00, //
+
+ // @232 '=' (5 pixels wide)
+ 0x00, //
+ 0x70, // ###
+ 0x00, //
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @240 '>' (5 pixels wide)
+ 0x00, //
+ 0x40, // #
+ 0x20, // #
+ 0x18, // ##
+ 0x20, // #
+ 0x40, // #
+ 0x00, //
+ 0x00, //
+
+ // @248 '?' (5 pixels wide)
+ 0x20, // #
+ 0x50, // # #
+ 0x10, // #
+ 0x20, // #
+ 0x00, //
+ 0x20, // #
+ 0x00, //
+ 0x00, //
+
+ // @256 '@' (5 pixels wide)
+ 0x30, // ##
+ 0x48, // # #
+ 0x48, // # #
+ 0x58, // # ##
+ 0x48, // # #
+ 0x40, // #
+ 0x38, // ###
+ 0x00, //
+
+ // @264 'A' (5 pixels wide)
+ 0x60, // ##
+ 0x20, // #
+ 0x50, // # #
+ 0x70, // ###
+ 0x88, // # #
+ 0xD8, // ## ##
+ 0x00, //
+ 0x00, //
+
+ // @272 'B' (5 pixels wide)
+ 0xF0, // ####
+ 0x48, // # #
+ 0x70, // ###
+ 0x48, // # #
+ 0x48, // # #
+ 0xF0, // ####
+ 0x00, //
+ 0x00, //
+
+ // @280 'C' (5 pixels wide)
+ 0x70, // ###
+ 0x50, // # #
+ 0x40, // #
+ 0x40, // #
+ 0x40, // #
+ 0x30, // ##
+ 0x00, //
+ 0x00, //
+
+ // @288 'D' (5 pixels wide)
+ 0xF0, // ####
+ 0x48, // # #
+ 0x48, // # #
+ 0x48, // # #
+ 0x48, // # #
+ 0xF0, // ####
+ 0x00, //
+ 0x00, //
+
+ // @296 'E' (5 pixels wide)
+ 0xF8, // #####
+ 0x48, // # #
+ 0x60, // ##
+ 0x40, // #
+ 0x48, // # #
+ 0xF8, // #####
+ 0x00, //
+ 0x00, //
+
+ // @304 'F' (5 pixels wide)
+ 0xF8, // #####
+ 0x48, // # #
+ 0x60, // ##
+ 0x40, // #
+ 0x40, // #
+ 0xE0, // ###
+ 0x00, //
+ 0x00, //
+
+ // @312 'G' (5 pixels wide)
+ 0x70, // ###
+ 0x40, // #
+ 0x40, // #
+ 0x58, // # ##
+ 0x50, // # #
+ 0x30, // ##
+ 0x00, //
+ 0x00, //
+
+ // @320 'H' (5 pixels wide)
+ 0xE8, // ### #
+ 0x48, // # #
+ 0x78, // ####
+ 0x48, // # #
+ 0x48, // # #
+ 0xE8, // ### #
+ 0x00, //
+ 0x00, //
+
+ // @328 'I' (5 pixels wide)
+ 0x70, // ###
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+
+ // @336 'J' (5 pixels wide)
+ 0x38, // ###
+ 0x10, // #
+ 0x10, // #
+ 0x50, // # #
+ 0x50, // # #
+ 0x20, // #
+ 0x00, //
+ 0x00, //
+
+ // @344 'K' (5 pixels wide)
+ 0xD8, // ## ##
+ 0x50, // # #
+ 0x60, // ##
+ 0x70, // ###
+ 0x50, // # #
+ 0xD8, // ## ##
+ 0x00, //
+ 0x00, //
+
+ // @352 'L' (5 pixels wide)
+ 0xE0, // ###
+ 0x40, // #
+ 0x40, // #
+ 0x40, // #
+ 0x48, // # #
+ 0xF8, // #####
+ 0x00, //
+ 0x00, //
+
+ // @360 'M' (5 pixels wide)
+ 0xD8, // ## ##
+ 0xD8, // ## ##
+ 0xD8, // ## ##
+ 0xA8, // # # #
+ 0x88, // # #
+ 0xD8, // ## ##
+ 0x00, //
+ 0x00, //
+
+ // @368 'N' (5 pixels wide)
+ 0xD8, // ## ##
+ 0x68, // ## #
+ 0x68, // ## #
+ 0x58, // # ##
+ 0x58, // # ##
+ 0xE8, // ### #
+ 0x00, //
+ 0x00, //
+
+ // @376 'O' (5 pixels wide)
+ 0x30, // ##
+ 0x48, // # #
+ 0x48, // # #
+ 0x48, // # #
+ 0x48, // # #
+ 0x30, // ##
+ 0x00, //
+ 0x00, //
+
+ // @384 'P' (5 pixels wide)
+ 0xF0, // ####
+ 0x48, // # #
+ 0x48, // # #
+ 0x70, // ###
+ 0x40, // #
+ 0xE0, // ###
+ 0x00, //
+ 0x00, //
+
+ // @392 'Q' (5 pixels wide)
+ 0x30, // ##
+ 0x48, // # #
+ 0x48, // # #
+ 0x48, // # #
+ 0x48, // # #
+ 0x30, // ##
+ 0x18, // ##
+ 0x00, //
+
+ // @400 'R' (5 pixels wide)
+ 0xF0, // ####
+ 0x48, // # #
+ 0x48, // # #
+ 0x70, // ###
+ 0x48, // # #
+ 0xE8, // ### #
+ 0x00, //
+ 0x00, //
+
+ // @408 'S' (5 pixels wide)
+ 0x70, // ###
+ 0x50, // # #
+ 0x20, // #
+ 0x10, // #
+ 0x50, // # #
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+
+ // @416 'T' (5 pixels wide)
+ 0xF8, // #####
+ 0xA8, // # # #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+
+ // @424 'U' (5 pixels wide)
+ 0xD8, // ## ##
+ 0x48, // # #
+ 0x48, // # #
+ 0x48, // # #
+ 0x48, // # #
+ 0x30, // ##
+ 0x00, //
+ 0x00, //
+
+ // @432 'V' (5 pixels wide)
+ 0xD8, // ## ##
+ 0x88, // # #
+ 0x48, // # #
+ 0x50, // # #
+ 0x50, // # #
+ 0x30, // ##
+ 0x00, //
+ 0x00, //
+
+ // @440 'W' (5 pixels wide)
+ 0xD8, // ## ##
+ 0x88, // # #
+ 0xA8, // # # #
+ 0xA8, // # # #
+ 0xA8, // # # #
+ 0x50, // # #
+ 0x00, //
+ 0x00, //
+
+ // @448 'X' (5 pixels wide)
+ 0xD8, // ## ##
+ 0x50, // # #
+ 0x20, // #
+ 0x20, // #
+ 0x50, // # #
+ 0xD8, // ## ##
+ 0x00, //
+ 0x00, //
+
+ // @456 'Y' (5 pixels wide)
+ 0xD8, // ## ##
+ 0x88, // # #
+ 0x50, // # #
+ 0x20, // #
+ 0x20, // #
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+
+ // @464 'Z' (5 pixels wide)
+ 0x78, // ####
+ 0x48, // # #
+ 0x10, // #
+ 0x20, // #
+ 0x48, // # #
+ 0x78, // ####
+ 0x00, //
+ 0x00, //
+
+ // @472 '[' (5 pixels wide)
+ 0x30, // ##
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x30, // ##
+ 0x00, //
+
+ // @480 '\' (5 pixels wide)
+ 0x80, // #
+ 0x40, // #
+ 0x40, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x10, // #
+ 0x00, //
+
+ // @488 ']' (5 pixels wide)
+ 0x60, // ##
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x60, // ##
+ 0x00, //
+
+ // @496 '^' (5 pixels wide)
+ 0x20, // #
+ 0x20, // #
+ 0x50, // # #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @504 '_' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0xF8, // #####
+
+ // @512 '`' (5 pixels wide)
+ 0x20, // #
+ 0x10, // #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x00, //
+
+ // @520 'a' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x30, // ##
+ 0x10, // #
+ 0x70, // ###
+ 0x78, // ####
+ 0x00, //
+ 0x00, //
+
+ // @528 'b' (5 pixels wide)
+ 0xC0, // ##
+ 0x40, // #
+ 0x70, // ###
+ 0x48, // # #
+ 0x48, // # #
+ 0xF0, // ####
+ 0x00, //
+ 0x00, //
+
+ // @536 'c' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x70, // ###
+ 0x40, // #
+ 0x40, // #
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+
+ // @544 'd' (5 pixels wide)
+ 0x18, // ##
+ 0x08, // #
+ 0x38, // ###
+ 0x48, // # #
+ 0x48, // # #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+
+ // @552 'e' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x70, // ###
+ 0x70, // ###
+ 0x40, // #
+ 0x30, // ##
+ 0x00, //
+ 0x00, //
+
+ // @560 'f' (5 pixels wide)
+ 0x10, // #
+ 0x20, // #
+ 0x70, // ###
+ 0x20, // #
+ 0x20, // #
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+
+ // @568 'g' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x38, // ###
+ 0x48, // # #
+ 0x48, // # #
+ 0x38, // ###
+ 0x08, // #
+ 0x30, // ##
+
+ // @576 'h' (5 pixels wide)
+ 0xC0, // ##
+ 0x40, // #
+ 0x70, // ###
+ 0x48, // # #
+ 0x48, // # #
+ 0xE8, // ### #
+ 0x00, //
+ 0x00, //
+
+ // @584 'i' (5 pixels wide)
+ 0x20, // #
+ 0x00, //
+ 0x60, // ##
+ 0x20, // #
+ 0x20, // #
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+
+ // @592 'j' (5 pixels wide)
+ 0x20, // #
+ 0x00, //
+ 0x70, // ###
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x10, // #
+ 0x70, // ###
+
+ // @600 'k' (5 pixels wide)
+ 0xC0, // ##
+ 0x40, // #
+ 0x58, // # ##
+ 0x70, // ###
+ 0x50, // # #
+ 0xD8, // ## ##
+ 0x00, //
+ 0x00, //
+
+ // @608 'l' (5 pixels wide)
+ 0x60, // ##
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+
+ // @616 'm' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0xD0, // ## #
+ 0xA8, // # # #
+ 0xA8, // # # #
+ 0xA8, // # # #
+ 0x00, //
+ 0x00, //
+
+ // @624 'n' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0xF0, // ####
+ 0x48, // # #
+ 0x48, // # #
+ 0xC8, // ## #
+ 0x00, //
+ 0x00, //
+
+ // @632 'o' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x30, // ##
+ 0x48, // # #
+ 0x48, // # #
+ 0x30, // ##
+ 0x00, //
+ 0x00, //
+
+ // @640 'p' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0xF0, // ####
+ 0x48, // # #
+ 0x48, // # #
+ 0x70, // ###
+ 0x40, // #
+ 0xE0, // ###
+
+ // @648 'q' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x38, // ###
+ 0x48, // # #
+ 0x48, // # #
+ 0x38, // ###
+ 0x08, // #
+ 0x18, // ##
+
+ // @656 'r' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x78, // ####
+ 0x20, // #
+ 0x20, // #
+ 0x70, // ###
+ 0x00, //
+ 0x00, //
+
+ // @664 's' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x30, // ##
+ 0x20, // #
+ 0x10, // #
+ 0x60, // ##
+ 0x00, //
+ 0x00, //
+
+ // @672 't' (5 pixels wide)
+ 0x00, //
+ 0x40, // #
+ 0xF0, // ####
+ 0x40, // #
+ 0x48, // # #
+ 0x30, // ##
+ 0x00, //
+ 0x00, //
+
+ // @680 'u' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0xD8, // ## ##
+ 0x48, // # #
+ 0x48, // # #
+ 0x38, // ###
+ 0x00, //
+ 0x00, //
+
+ // @688 'v' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0xC8, // ## #
+ 0x48, // # #
+ 0x30, // ##
+ 0x30, // ##
+ 0x00, //
+ 0x00, //
+
+ // @696 'w' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0xD8, // ## ##
+ 0xA8, // # # #
+ 0xA8, // # # #
+ 0x50, // # #
+ 0x00, //
+ 0x00, //
+
+ // @704 'x' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x48, // # #
+ 0x30, // ##
+ 0x30, // ##
+ 0x48, // # #
+ 0x00, //
+ 0x00, //
+
+ // @712 'y' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0xD8, // ## ##
+ 0x50, // # #
+ 0x50, // # #
+ 0x20, // #
+ 0x20, // #
+ 0x60, // ##
+
+ // @720 'z' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x78, // ####
+ 0x50, // # #
+ 0x28, // # #
+ 0x78, // ####
+ 0x00, //
+ 0x00, //
+
+ // @728 '{' (5 pixels wide)
+ 0x10, // #
+ 0x20, // #
+ 0x20, // #
+ 0x60, // ##
+ 0x20, // #
+ 0x20, // #
+ 0x10, // #
+ 0x00, //
+
+ // @736 '|' (5 pixels wide)
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x20, // #
+ 0x00, //
+
+ // @744 '}' (5 pixels wide)
+ 0x40, // #
+ 0x20, // #
+ 0x20, // #
+ 0x30, // ##
+ 0x20, // #
+ 0x20, // #
+ 0x40, // #
+ 0x00, //
+
+ // @752 '~' (5 pixels wide)
+ 0x00, //
+ 0x00, //
+ 0x00, //
+ 0x28, // # #
+ 0x50, // # #
+ 0x00, //
+ 0x00, //
+ 0x00, //
+};
+
+sFONT Font8 = {
+ Font8_Table,
+ 5, /* Width */
+ 8, /* Height */
+};
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Function_Prototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FONTS_Private_Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/fonts.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,134 @@
+/**
+ ******************************************************************************
+ * @file fonts.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 18-February-2014
+ * @brief Header for fonts.c file
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __FONTS_H
+#define __FONTS_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include <stdint.h>
+
+/** @addtogroup Utilities
+ * @{
+ */
+
+/** @addtogroup STM32_EVAL
+ * @{
+ */
+
+/** @addtogroup Common
+ * @{
+ */
+
+/** @addtogroup FONTS
+ * @{
+ */
+
+/** @defgroup FONTS_Exported_Types
+ * @{
+ */
+typedef struct _tFont
+{
+ const uint8_t *table;
+ uint16_t Width;
+ uint16_t Height;
+
+} sFONT;
+
+extern sFONT Font24;
+extern sFONT Font20;
+extern sFONT Font16;
+extern sFONT Font12;
+extern sFONT Font8;
+/**
+ * @}
+ */
+
+/** @defgroup FONTS_Exported_Constants
+ * @{
+ */
+#define LINE(x) ((x) * (((sFONT *)BSP_LCD_GetFont())->Height))
+
+/**
+ * @}
+ */
+
+/** @defgroup FONTS_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup FONTS_Exported_Functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __FONTS_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/ft5336.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,625 @@
+/**
+ ******************************************************************************
+ * @file ft5336.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file provides a set of functions needed to manage the FT5336
+ * touch screen devices.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "ft5336.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup Component
+ * @{
+ */
+
+/** @defgroup FT5336
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+
+/** @defgroup FT5336_Private_Types_Definitions
+ * @{
+ */
+
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup FT5336_Private_Defines
+ * @{
+ */
+
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup FT5336_Private_Macros
+ * @{
+ */
+
+/* Private variables ---------------------------------------------------------*/
+
+/** @defgroup FT5336_Private_Variables
+ * @{
+ */
+
+/* Touch screen driver structure initialization */
+TS_DrvTypeDef ft5336_ts_drv =
+{
+ ft5336_Init,
+ ft5336_ReadID,
+ ft5336_Reset,
+
+ ft5336_TS_Start,
+ ft5336_TS_DetectTouch,
+ ft5336_TS_GetXY,
+
+ ft5336_TS_EnableIT,
+ ft5336_TS_ClearIT,
+ ft5336_TS_ITStatus,
+ ft5336_TS_DisableIT
+
+};
+
+/* Global ft5336 handle */
+static ft5336_handle_TypeDef ft5336_handle = { FT5336_I2C_NOT_INITIALIZED, 0, 0};
+
+/**
+ * @}
+ */
+
+/** @defgroup ft5336_Private_Function_Prototypes
+ * @{
+ */
+
+/* Private functions prototypes-----------------------------------------------*/
+
+/**
+ * @brief Return the status of I2C was initialized or not.
+ * @param None.
+ * @retval : I2C initialization status.
+ */
+static uint8_t ft5336_Get_I2C_InitializedStatus(void);
+
+/**
+ * @brief I2C initialize if needed.
+ * @param None.
+ * @retval : None.
+ */
+static void ft5336_I2C_InitializeIfRequired(void);
+
+/**
+ * @brief Basic static configuration of TouchScreen
+ * @param DeviceAddr: FT5336 Device address for communication on I2C Bus.
+ * @retval Status FT5336_STATUS_OK or FT5336_STATUS_NOT_OK.
+ */
+static uint32_t ft5336_TS_Configure(uint16_t DeviceAddr);
+
+/** @defgroup ft5336_Private_Functions
+ * @{
+ */
+
+/** @defgroup ft5336_Public_Function_Body
+ * @{
+ */
+
+/* Public functions bodies-----------------------------------------------*/
+
+
+/**
+ * @brief Initialize the ft5336 communication bus
+ * from MCU to FT5336 : ie I2C channel initialization (if required).
+ * @param DeviceAddr: Device address on communication Bus (I2C slave address of FT5336).
+ * @retval None
+ */
+void ft5336_Init(uint16_t DeviceAddr)
+{
+ /* Wait at least 200ms after power up before accessing registers
+ * Trsi timing (Time of starting to report point after resetting) from FT5336GQQ datasheet */
+ TS_IO_Delay(200);
+
+ /* Initialize I2C link if needed */
+ ft5336_I2C_InitializeIfRequired();
+}
+
+/**
+ * @brief Software Reset the ft5336.
+ * @note : Not applicable to FT5336.
+ * @param DeviceAddr: Device address on communication Bus (I2C slave address of FT5336).
+ * @retval None
+ */
+void ft5336_Reset(uint16_t DeviceAddr)
+{
+ /* Do nothing */
+ /* No software reset sequence available in FT5336 IC */
+}
+
+/**
+ * @brief Read the ft5336 device ID, pre initialize I2C in case of need to be
+ * able to read the FT5336 device ID, and verify this is a FT5336.
+ * @param DeviceAddr: I2C FT5336 Slave address.
+ * @retval The Device ID (two bytes).
+ */
+uint16_t ft5336_ReadID(uint16_t DeviceAddr)
+{
+ volatile uint8_t ucReadId = 0;
+ uint8_t nbReadAttempts = 0;
+ uint8_t bFoundDevice = 0; /* Device not found by default */
+
+ /* Initialize I2C link if needed */
+ ft5336_I2C_InitializeIfRequired();
+
+ /* At maximum 4 attempts to read ID : exit at first finding of the searched device ID */
+ for(nbReadAttempts = 0; ((nbReadAttempts < 3) && !(bFoundDevice)); nbReadAttempts++)
+ {
+ /* Read register FT5336_CHIP_ID_REG as DeviceID detection */
+ ucReadId = TS_IO_Read(DeviceAddr, FT5336_CHIP_ID_REG);
+
+ /* Found the searched device ID ? */
+ if(ucReadId == FT5336_ID_VALUE)
+ {
+ /* Set device as found */
+ bFoundDevice = 1;
+ }
+ }
+
+ /* Return the device ID value */
+ return (ucReadId);
+}
+
+/**
+ * @brief Configures the touch Screen IC device to start detecting touches
+ * @param DeviceAddr: Device address on communication Bus (I2C slave address).
+ * @retval None.
+ */
+void ft5336_TS_Start(uint16_t DeviceAddr)
+{
+ /* Minimum static configuration of FT5336 */
+ FT5336_ASSERT(ft5336_TS_Configure(DeviceAddr));
+
+ /* By default set FT5336 IC in Polling mode : no INT generation on FT5336 for new touch available */
+ /* Note TS_INT is active low */
+ ft5336_TS_DisableIT(DeviceAddr);
+}
+
+/**
+ * @brief Return if there is touches detected or not.
+ * Try to detect new touches and forget the old ones (reset internal global
+ * variables).
+ * @param DeviceAddr: Device address on communication Bus.
+ * @retval : Number of active touches detected (can be 0, 1 or 2).
+ */
+uint8_t ft5336_TS_DetectTouch(uint16_t DeviceAddr)
+{
+ volatile uint8_t nbTouch = 0;
+
+ /* Read register FT5336_TD_STAT_REG to check number of touches detection */
+ nbTouch = TS_IO_Read(DeviceAddr, FT5336_TD_STAT_REG);
+ nbTouch &= FT5336_TD_STAT_MASK;
+
+ if(nbTouch > FT5336_MAX_DETECTABLE_TOUCH)
+ {
+ /* If invalid number of touch detected, set it to zero */
+ nbTouch = 0;
+ }
+
+ /* Update ft5336 driver internal global : current number of active touches */
+ ft5336_handle.currActiveTouchNb = nbTouch;
+
+ /* Reset current active touch index on which to work on */
+ ft5336_handle.currActiveTouchIdx = 0;
+
+ return(nbTouch);
+}
+
+/**
+ * @brief Get the touch screen X and Y positions values
+ * Manage multi touch thanks to touch Index global
+ * variable 'ft5336_handle.currActiveTouchIdx'.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @param X: Pointer to X position value
+ * @param Y: Pointer to Y position value
+ * @retval None.
+ */
+void ft5336_TS_GetXY(uint16_t DeviceAddr, uint16_t *X, uint16_t *Y)
+{
+ volatile uint8_t ucReadData = 0;
+ static uint16_t coord;
+ uint8_t regAddressXLow = 0;
+ uint8_t regAddressXHigh = 0;
+ uint8_t regAddressYLow = 0;
+ uint8_t regAddressYHigh = 0;
+
+ if(ft5336_handle.currActiveTouchIdx < ft5336_handle.currActiveTouchNb)
+ {
+ switch(ft5336_handle.currActiveTouchIdx)
+ {
+ case 0 :
+ regAddressXLow = FT5336_P1_XL_REG;
+ regAddressXHigh = FT5336_P1_XH_REG;
+ regAddressYLow = FT5336_P1_YL_REG;
+ regAddressYHigh = FT5336_P1_YH_REG;
+ break;
+
+ case 1 :
+ regAddressXLow = FT5336_P2_XL_REG;
+ regAddressXHigh = FT5336_P2_XH_REG;
+ regAddressYLow = FT5336_P2_YL_REG;
+ regAddressYHigh = FT5336_P2_YH_REG;
+ break;
+
+ case 2 :
+ regAddressXLow = FT5336_P3_XL_REG;
+ regAddressXHigh = FT5336_P3_XH_REG;
+ regAddressYLow = FT5336_P3_YL_REG;
+ regAddressYHigh = FT5336_P3_YH_REG;
+ break;
+
+ case 3 :
+ regAddressXLow = FT5336_P4_XL_REG;
+ regAddressXHigh = FT5336_P4_XH_REG;
+ regAddressYLow = FT5336_P4_YL_REG;
+ regAddressYHigh = FT5336_P4_YH_REG;
+ break;
+
+ case 4 :
+ regAddressXLow = FT5336_P5_XL_REG;
+ regAddressXHigh = FT5336_P5_XH_REG;
+ regAddressYLow = FT5336_P5_YL_REG;
+ regAddressYHigh = FT5336_P5_YH_REG;
+ break;
+
+ case 5 :
+ regAddressXLow = FT5336_P6_XL_REG;
+ regAddressXHigh = FT5336_P6_XH_REG;
+ regAddressYLow = FT5336_P6_YL_REG;
+ regAddressYHigh = FT5336_P6_YH_REG;
+ break;
+
+ case 6 :
+ regAddressXLow = FT5336_P7_XL_REG;
+ regAddressXHigh = FT5336_P7_XH_REG;
+ regAddressYLow = FT5336_P7_YL_REG;
+ regAddressYHigh = FT5336_P7_YH_REG;
+ break;
+
+ case 7 :
+ regAddressXLow = FT5336_P8_XL_REG;
+ regAddressXHigh = FT5336_P8_XH_REG;
+ regAddressYLow = FT5336_P8_YL_REG;
+ regAddressYHigh = FT5336_P8_YH_REG;
+ break;
+
+ case 8 :
+ regAddressXLow = FT5336_P9_XL_REG;
+ regAddressXHigh = FT5336_P9_XH_REG;
+ regAddressYLow = FT5336_P9_YL_REG;
+ regAddressYHigh = FT5336_P9_YH_REG;
+ break;
+
+ case 9 :
+ regAddressXLow = FT5336_P10_XL_REG;
+ regAddressXHigh = FT5336_P10_XH_REG;
+ regAddressYLow = FT5336_P10_YL_REG;
+ regAddressYHigh = FT5336_P10_YH_REG;
+ break;
+
+ default :
+ break;
+
+ } /* end switch(ft5336_handle.currActiveTouchIdx) */
+
+ /* Read low part of X position */
+ ucReadData = TS_IO_Read(DeviceAddr, regAddressXLow);
+ coord = (ucReadData & FT5336_TOUCH_POS_LSB_MASK) >> FT5336_TOUCH_POS_LSB_SHIFT;
+
+ /* Read high part of X position */
+ ucReadData = TS_IO_Read(DeviceAddr, regAddressXHigh);
+ coord |= ((ucReadData & FT5336_TOUCH_POS_MSB_MASK) >> FT5336_TOUCH_POS_MSB_SHIFT) << 8;
+
+ /* Send back ready X position to caller */
+ *X = coord;
+
+ /* Read low part of Y position */
+ ucReadData = TS_IO_Read(DeviceAddr, regAddressYLow);
+ coord = (ucReadData & FT5336_TOUCH_POS_LSB_MASK) >> FT5336_TOUCH_POS_LSB_SHIFT;
+
+ /* Read high part of Y position */
+ ucReadData = TS_IO_Read(DeviceAddr, regAddressYHigh);
+ coord |= ((ucReadData & FT5336_TOUCH_POS_MSB_MASK) >> FT5336_TOUCH_POS_MSB_SHIFT) << 8;
+
+ /* Send back ready Y position to caller */
+ *Y = coord;
+
+ ft5336_handle.currActiveTouchIdx++; /* next call will work on next touch */
+
+ } /* of if(ft5336_handle.currActiveTouchIdx < ft5336_handle.currActiveTouchNb) */
+}
+
+/**
+ * @brief Configure the FT5336 device to generate IT on given INT pin
+ * connected to MCU as EXTI.
+ * @param DeviceAddr: Device address on communication Bus (Slave I2C address of FT5336).
+ * @retval None
+ */
+void ft5336_TS_EnableIT(uint16_t DeviceAddr)
+{
+ uint8_t regValue = 0;
+ regValue = (FT5336_G_MODE_INTERRUPT_TRIGGER & (FT5336_G_MODE_INTERRUPT_MASK >> FT5336_G_MODE_INTERRUPT_SHIFT)) << FT5336_G_MODE_INTERRUPT_SHIFT;
+
+ /* Set interrupt trigger mode in FT5336_GMODE_REG */
+ TS_IO_Write(DeviceAddr, FT5336_GMODE_REG, regValue);
+}
+
+/**
+ * @brief Configure the FT5336 device to stop generating IT on the given INT pin
+ * connected to MCU as EXTI.
+ * @param DeviceAddr: Device address on communication Bus (Slave I2C address of FT5336).
+ * @retval None
+ */
+void ft5336_TS_DisableIT(uint16_t DeviceAddr)
+{
+ uint8_t regValue = 0;
+ regValue = (FT5336_G_MODE_INTERRUPT_POLLING & (FT5336_G_MODE_INTERRUPT_MASK >> FT5336_G_MODE_INTERRUPT_SHIFT)) << FT5336_G_MODE_INTERRUPT_SHIFT;
+
+ /* Set interrupt polling mode in FT5336_GMODE_REG */
+ TS_IO_Write(DeviceAddr, FT5336_GMODE_REG, regValue);
+}
+
+/**
+ * @brief Get IT status from FT5336 interrupt status registers
+ * Should be called Following an EXTI coming to the MCU to know the detailed
+ * reason of the interrupt.
+ * @note : This feature is not applicable to FT5336.
+ * @param DeviceAddr: Device address on communication Bus (I2C slave address of FT5336).
+ * @retval TS interrupts status : always return 0 here
+ */
+uint8_t ft5336_TS_ITStatus(uint16_t DeviceAddr)
+{
+ /* Always return 0 as feature not applicable to FT5336 */
+ return 0;
+}
+
+/**
+ * @brief Clear IT status in FT5336 interrupt status clear registers
+ * Should be called Following an EXTI coming to the MCU.
+ * @note : This feature is not applicable to FT5336.
+ * @param DeviceAddr: Device address on communication Bus (I2C slave address of FT5336).
+ * @retval None
+ */
+void ft5336_TS_ClearIT(uint16_t DeviceAddr)
+{
+ /* Nothing to be done here for FT5336 */
+}
+
+/**** NEW FEATURES enabled when Multi-touch support is enabled ****/
+
+#if (TS_MULTI_TOUCH_SUPPORTED == 1)
+
+/**
+ * @brief Get the last touch gesture identification (zoom, move up/down...).
+ * @param DeviceAddr: Device address on communication Bus (I2C slave address of FT5336).
+ * @param pGestureId : Pointer to get last touch gesture Identification.
+ * @retval None.
+ */
+void ft5336_TS_GetGestureID(uint16_t DeviceAddr, uint32_t * pGestureId)
+{
+ volatile uint8_t ucReadData = 0;
+
+ ucReadData = TS_IO_Read(DeviceAddr, FT5336_GEST_ID_REG);
+
+ * pGestureId = ucReadData;
+}
+
+/**
+ * @brief Get the touch detailed informations on touch number 'touchIdx' (0..1)
+ * This touch detailed information contains :
+ * - weight that was applied to this touch
+ * - sub-area of the touch in the touch panel
+ * - event of linked to the touch (press down, lift up, ...)
+ * @param DeviceAddr: Device address on communication Bus (I2C slave address of FT5336).
+ * @param touchIdx : Passed index of the touch (0..1) on which we want to get the
+ * detailed information.
+ * @param pWeight : Pointer to to get the weight information of 'touchIdx'.
+ * @param pArea : Pointer to to get the sub-area information of 'touchIdx'.
+ * @param pEvent : Pointer to to get the event information of 'touchIdx'.
+
+ * @retval None.
+ */
+void ft5336_TS_GetTouchInfo(uint16_t DeviceAddr,
+ uint32_t touchIdx,
+ uint32_t * pWeight,
+ uint32_t * pArea,
+ uint32_t * pEvent)
+{
+ volatile uint8_t ucReadData = 0;
+ uint8_t regAddressXHigh = 0;
+ uint8_t regAddressPWeight = 0;
+ uint8_t regAddressPMisc = 0;
+
+ if(touchIdx < ft5336_handle.currActiveTouchNb)
+ {
+ switch(touchIdx)
+ {
+ case 0 :
+ regAddressXHigh = FT5336_P1_XH_REG;
+ regAddressPWeight = FT5336_P1_WEIGHT_REG;
+ regAddressPMisc = FT5336_P1_MISC_REG;
+ break;
+
+ case 1 :
+ regAddressXHigh = FT5336_P2_XH_REG;
+ regAddressPWeight = FT5336_P2_WEIGHT_REG;
+ regAddressPMisc = FT5336_P2_MISC_REG;
+ break;
+
+ case 2 :
+ regAddressXHigh = FT5336_P3_XH_REG;
+ regAddressPWeight = FT5336_P3_WEIGHT_REG;
+ regAddressPMisc = FT5336_P3_MISC_REG;
+ break;
+
+ case 3 :
+ regAddressXHigh = FT5336_P4_XH_REG;
+ regAddressPWeight = FT5336_P4_WEIGHT_REG;
+ regAddressPMisc = FT5336_P4_MISC_REG;
+ break;
+
+ case 4 :
+ regAddressXHigh = FT5336_P5_XH_REG;
+ regAddressPWeight = FT5336_P5_WEIGHT_REG;
+ regAddressPMisc = FT5336_P5_MISC_REG;
+ break;
+
+ case 5 :
+ regAddressXHigh = FT5336_P6_XH_REG;
+ regAddressPWeight = FT5336_P6_WEIGHT_REG;
+ regAddressPMisc = FT5336_P6_MISC_REG;
+ break;
+
+ case 6 :
+ regAddressXHigh = FT5336_P7_XH_REG;
+ regAddressPWeight = FT5336_P7_WEIGHT_REG;
+ regAddressPMisc = FT5336_P7_MISC_REG;
+ break;
+
+ case 7 :
+ regAddressXHigh = FT5336_P8_XH_REG;
+ regAddressPWeight = FT5336_P8_WEIGHT_REG;
+ regAddressPMisc = FT5336_P8_MISC_REG;
+ break;
+
+ case 8 :
+ regAddressXHigh = FT5336_P9_XH_REG;
+ regAddressPWeight = FT5336_P9_WEIGHT_REG;
+ regAddressPMisc = FT5336_P9_MISC_REG;
+ break;
+
+ case 9 :
+ regAddressXHigh = FT5336_P10_XH_REG;
+ regAddressPWeight = FT5336_P10_WEIGHT_REG;
+ regAddressPMisc = FT5336_P10_MISC_REG;
+ break;
+
+ default :
+ break;
+
+ } /* end switch(touchIdx) */
+
+ /* Read Event Id of touch index */
+ ucReadData = TS_IO_Read(DeviceAddr, regAddressXHigh);
+ * pEvent = (ucReadData & FT5336_TOUCH_EVT_FLAG_MASK) >> FT5336_TOUCH_EVT_FLAG_SHIFT;
+
+ /* Read weight of touch index */
+ ucReadData = TS_IO_Read(DeviceAddr, regAddressPWeight);
+ * pWeight = (ucReadData & FT5336_TOUCH_WEIGHT_MASK) >> FT5336_TOUCH_WEIGHT_SHIFT;
+
+ /* Read area of touch index */
+ ucReadData = TS_IO_Read(DeviceAddr, regAddressPMisc);
+ * pArea = (ucReadData & FT5336_TOUCH_AREA_MASK) >> FT5336_TOUCH_AREA_SHIFT;
+
+ } /* of if(touchIdx < ft5336_handle.currActiveTouchNb) */
+}
+
+#endif /* TS_MULTI_TOUCH_SUPPORTED == 1 */
+
+/** @defgroup ft5336_Static_Function_Body
+ * @{
+ */
+
+/* Static functions bodies-----------------------------------------------*/
+
+
+/**
+ * @brief Return the status of I2C was initialized or not.
+ * @param None.
+ * @retval : I2C initialization status.
+ */
+static uint8_t ft5336_Get_I2C_InitializedStatus(void)
+{
+ return(ft5336_handle.i2cInitialized);
+}
+
+/**
+ * @brief I2C initialize if needed.
+ * @param None.
+ * @retval : None.
+ */
+static void ft5336_I2C_InitializeIfRequired(void)
+{
+ if(ft5336_Get_I2C_InitializedStatus() == FT5336_I2C_NOT_INITIALIZED)
+ {
+ /* Initialize TS IO BUS layer (I2C) */
+ TS_IO_Init();
+
+ /* Set state to initialized */
+ ft5336_handle.i2cInitialized = FT5336_I2C_INITIALIZED;
+ }
+}
+
+/**
+ * @brief Basic static configuration of TouchScreen
+ * @param DeviceAddr: FT5336 Device address for communication on I2C Bus.
+ * @retval Status FT5336_STATUS_OK or FT5336_STATUS_NOT_OK.
+ */
+static uint32_t ft5336_TS_Configure(uint16_t DeviceAddr)
+{
+ uint32_t status = FT5336_STATUS_OK;
+
+ /* Nothing special to be done for FT5336 */
+
+ return(status);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/ft5336.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,540 @@
+/**
+ ******************************************************************************
+ * @file ft5336.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file contains all the functions prototypes for the
+ * ft5336.c Touch screen driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __FT5336_H
+#define __FT5336_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Set Multi-touch as supported */
+#if !defined(TS_MONO_TOUCH_SUPPORTED)
+#define TS_MULTI_TOUCH_SUPPORTED 1
+#endif /* TS_MONO_TOUCH_SUPPORTED */
+
+/* Includes ------------------------------------------------------------------*/
+#include "ts.h"
+
+/* Macros --------------------------------------------------------------------*/
+
+#if defined(FT5336_ENABLE_ASSERT)
+/* Assert activated */
+#define FT5336_ASSERT(__condition__) do { if(__condition__) \
+ { \
+ while(1); \
+ } \
+ }while(0)
+#else
+/* Assert not activated : macro has no effect */
+#define FT5336_ASSERT(__condition__) do { if(__condition__) \
+ { \
+ ; \
+ } \
+ }while(0)
+#endif /* FT5336_ENABLE_ASSERT == 1 */
+
+/** @typedef ft5336_handle_TypeDef
+ * ft5336 Handle definition.
+ */
+typedef struct
+{
+ uint8_t i2cInitialized;
+
+ /* field holding the current number of simultaneous active touches */
+ uint8_t currActiveTouchNb;
+
+ /* field holding the touch index currently managed */
+ uint8_t currActiveTouchIdx;
+
+} ft5336_handle_TypeDef;
+
+ /** @addtogroup BSP
+ * @{
+ */
+
+ /** @addtogroup Component
+ * @{
+ */
+
+ /** @defgroup FT5336
+ * @{
+ */
+
+ /* Exported types ------------------------------------------------------------*/
+
+ /** @defgroup FT5336_Exported_Types
+ * @{
+ */
+
+ /* Exported constants --------------------------------------------------------*/
+
+ /** @defgroup FT5336_Exported_Constants
+ * @{
+ */
+
+ /* I2C Slave address of touchscreen FocalTech FT5336 */
+#define FT5336_I2C_SLAVE_ADDRESS ((uint8_t)0x70)
+
+ /* Maximum border values of the touchscreen pad */
+#define FT5336_MAX_WIDTH ((uint16_t)480) /* Touchscreen pad max width */
+#define FT5336_MAX_HEIGHT ((uint16_t)272) /* Touchscreen pad max height */
+
+ /* Possible values of driver functions return status */
+#define FT5336_STATUS_OK ((uint8_t)0x00)
+#define FT5336_STATUS_NOT_OK ((uint8_t)0x01)
+
+ /* Possible values of global variable 'TS_I2C_Initialized' */
+#define FT5336_I2C_NOT_INITIALIZED ((uint8_t)0x00)
+#define FT5336_I2C_INITIALIZED ((uint8_t)0x01)
+
+ /* Max detectable simultaneous touches */
+#define FT5336_MAX_DETECTABLE_TOUCH ((uint8_t)0x05)
+
+ /**
+ * @brief : Definitions for FT5336 I2C register addresses on 8 bit
+ **/
+
+ /* Current mode register of the FT5336 (R/W) */
+#define FT5336_DEV_MODE_REG ((uint8_t)0x00)
+
+ /* Possible values of FT5336_DEV_MODE_REG */
+#define FT5336_DEV_MODE_WORKING ((uint8_t)0x00)
+#define FT5336_DEV_MODE_FACTORY ((uint8_t)0x04)
+
+#define FT5336_DEV_MODE_MASK ((uint8_t)0x07)
+#define FT5336_DEV_MODE_SHIFT ((uint8_t)0x04)
+
+ /* Gesture ID register */
+#define FT5336_GEST_ID_REG ((uint8_t)0x01)
+
+ /* Possible values of FT5336_GEST_ID_REG */
+#define FT5336_GEST_ID_NO_GESTURE ((uint8_t)0x00)
+#define FT5336_GEST_ID_MOVE_UP ((uint8_t)0x10)
+#define FT5336_GEST_ID_MOVE_RIGHT ((uint8_t)0x14)
+#define FT5336_GEST_ID_MOVE_DOWN ((uint8_t)0x18)
+#define FT5336_GEST_ID_MOVE_LEFT ((uint8_t)0x1C)
+#define FT5336_GEST_ID_SINGLE_CLICK ((uint8_t)0x20)
+#define FT5336_GEST_ID_DOUBLE_CLICK ((uint8_t)0x22)
+#define FT5336_GEST_ID_ROTATE_CLOCKWISE ((uint8_t)0x28)
+#define FT5336_GEST_ID_ROTATE_C_CLOCKWISE ((uint8_t)0x29)
+#define FT5336_GEST_ID_ZOOM_IN ((uint8_t)0x40)
+#define FT5336_GEST_ID_ZOOM_OUT ((uint8_t)0x49)
+
+ /* Touch Data Status register : gives number of active touch points (0..5) */
+#define FT5336_TD_STAT_REG ((uint8_t)0x02)
+
+ /* Values related to FT5336_TD_STAT_REG */
+#define FT5336_TD_STAT_MASK ((uint8_t)0x0F)
+#define FT5336_TD_STAT_SHIFT ((uint8_t)0x00)
+
+ /* Values Pn_XH and Pn_YH related */
+#define FT5336_TOUCH_EVT_FLAG_PRESS_DOWN ((uint8_t)0x00)
+#define FT5336_TOUCH_EVT_FLAG_LIFT_UP ((uint8_t)0x01)
+#define FT5336_TOUCH_EVT_FLAG_CONTACT ((uint8_t)0x02)
+#define FT5336_TOUCH_EVT_FLAG_NO_EVENT ((uint8_t)0x03)
+
+#define FT5336_TOUCH_EVT_FLAG_SHIFT ((uint8_t)0x06)
+#define FT5336_TOUCH_EVT_FLAG_MASK ((uint8_t)(3 << FT5336_TOUCH_EVT_FLAG_SHIFT))
+
+#define FT5336_TOUCH_POS_MSB_MASK ((uint8_t)0x0F)
+#define FT5336_TOUCH_POS_MSB_SHIFT ((uint8_t)0x00)
+
+ /* Values Pn_XL and Pn_YL related */
+#define FT5336_TOUCH_POS_LSB_MASK ((uint8_t)0xFF)
+#define FT5336_TOUCH_POS_LSB_SHIFT ((uint8_t)0x00)
+
+#define FT5336_P1_XH_REG ((uint8_t)0x03)
+#define FT5336_P1_XL_REG ((uint8_t)0x04)
+#define FT5336_P1_YH_REG ((uint8_t)0x05)
+#define FT5336_P1_YL_REG ((uint8_t)0x06)
+
+/* Touch Pressure register value (R) */
+#define FT5336_P1_WEIGHT_REG ((uint8_t)0x07)
+
+/* Values Pn_WEIGHT related */
+#define FT5336_TOUCH_WEIGHT_MASK ((uint8_t)0xFF)
+#define FT5336_TOUCH_WEIGHT_SHIFT ((uint8_t)0x00)
+
+/* Touch area register */
+#define FT5336_P1_MISC_REG ((uint8_t)0x08)
+
+/* Values related to FT5336_Pn_MISC_REG */
+#define FT5336_TOUCH_AREA_MASK ((uint8_t)(0x04 << 4))
+#define FT5336_TOUCH_AREA_SHIFT ((uint8_t)0x04)
+
+#define FT5336_P2_XH_REG ((uint8_t)0x09)
+#define FT5336_P2_XL_REG ((uint8_t)0x0A)
+#define FT5336_P2_YH_REG ((uint8_t)0x0B)
+#define FT5336_P2_YL_REG ((uint8_t)0x0C)
+#define FT5336_P2_WEIGHT_REG ((uint8_t)0x0D)
+#define FT5336_P2_MISC_REG ((uint8_t)0x0E)
+
+#define FT5336_P3_XH_REG ((uint8_t)0x0F)
+#define FT5336_P3_XL_REG ((uint8_t)0x10)
+#define FT5336_P3_YH_REG ((uint8_t)0x11)
+#define FT5336_P3_YL_REG ((uint8_t)0x12)
+#define FT5336_P3_WEIGHT_REG ((uint8_t)0x13)
+#define FT5336_P3_MISC_REG ((uint8_t)0x14)
+
+#define FT5336_P4_XH_REG ((uint8_t)0x15)
+#define FT5336_P4_XL_REG ((uint8_t)0x16)
+#define FT5336_P4_YH_REG ((uint8_t)0x17)
+#define FT5336_P4_YL_REG ((uint8_t)0x18)
+#define FT5336_P4_WEIGHT_REG ((uint8_t)0x19)
+#define FT5336_P4_MISC_REG ((uint8_t)0x1A)
+
+#define FT5336_P5_XH_REG ((uint8_t)0x1B)
+#define FT5336_P5_XL_REG ((uint8_t)0x1C)
+#define FT5336_P5_YH_REG ((uint8_t)0x1D)
+#define FT5336_P5_YL_REG ((uint8_t)0x1E)
+#define FT5336_P5_WEIGHT_REG ((uint8_t)0x1F)
+#define FT5336_P5_MISC_REG ((uint8_t)0x20)
+
+#define FT5336_P6_XH_REG ((uint8_t)0x21)
+#define FT5336_P6_XL_REG ((uint8_t)0x22)
+#define FT5336_P6_YH_REG ((uint8_t)0x23)
+#define FT5336_P6_YL_REG ((uint8_t)0x24)
+#define FT5336_P6_WEIGHT_REG ((uint8_t)0x25)
+#define FT5336_P6_MISC_REG ((uint8_t)0x26)
+
+#define FT5336_P7_XH_REG ((uint8_t)0x27)
+#define FT5336_P7_XL_REG ((uint8_t)0x28)
+#define FT5336_P7_YH_REG ((uint8_t)0x29)
+#define FT5336_P7_YL_REG ((uint8_t)0x2A)
+#define FT5336_P7_WEIGHT_REG ((uint8_t)0x2B)
+#define FT5336_P7_MISC_REG ((uint8_t)0x2C)
+
+#define FT5336_P8_XH_REG ((uint8_t)0x2D)
+#define FT5336_P8_XL_REG ((uint8_t)0x2E)
+#define FT5336_P8_YH_REG ((uint8_t)0x2F)
+#define FT5336_P8_YL_REG ((uint8_t)0x30)
+#define FT5336_P8_WEIGHT_REG ((uint8_t)0x31)
+#define FT5336_P8_MISC_REG ((uint8_t)0x32)
+
+#define FT5336_P9_XH_REG ((uint8_t)0x33)
+#define FT5336_P9_XL_REG ((uint8_t)0x34)
+#define FT5336_P9_YH_REG ((uint8_t)0x35)
+#define FT5336_P9_YL_REG ((uint8_t)0x36)
+#define FT5336_P9_WEIGHT_REG ((uint8_t)0x37)
+#define FT5336_P9_MISC_REG ((uint8_t)0x38)
+
+#define FT5336_P10_XH_REG ((uint8_t)0x39)
+#define FT5336_P10_XL_REG ((uint8_t)0x3A)
+#define FT5336_P10_YH_REG ((uint8_t)0x3B)
+#define FT5336_P10_YL_REG ((uint8_t)0x3C)
+#define FT5336_P10_WEIGHT_REG ((uint8_t)0x3D)
+#define FT5336_P10_MISC_REG ((uint8_t)0x3E)
+
+ /* Threshold for touch detection */
+#define FT5336_TH_GROUP_REG ((uint8_t)0x80)
+
+ /* Values FT5336_TH_GROUP_REG : threshold related */
+#define FT5336_THRESHOLD_MASK ((uint8_t)0xFF)
+#define FT5336_THRESHOLD_SHIFT ((uint8_t)0x00)
+
+ /* Filter function coefficients */
+#define FT5336_TH_DIFF_REG ((uint8_t)0x85)
+
+ /* Control register */
+#define FT5336_CTRL_REG ((uint8_t)0x86)
+
+ /* Values related to FT5336_CTRL_REG */
+
+ /* Will keep the Active mode when there is no touching */
+#define FT5336_CTRL_KEEP_ACTIVE_MODE ((uint8_t)0x00)
+
+ /* Switching from Active mode to Monitor mode automatically when there is no touching */
+#define FT5336_CTRL_KEEP_AUTO_SWITCH_MONITOR_MODE ((uint8_t)0x01
+
+ /* The time period of switching from Active mode to Monitor mode when there is no touching */
+#define FT5336_TIMEENTERMONITOR_REG ((uint8_t)0x87)
+
+ /* Report rate in Active mode */
+#define FT5336_PERIODACTIVE_REG ((uint8_t)0x88)
+
+ /* Report rate in Monitor mode */
+#define FT5336_PERIODMONITOR_REG ((uint8_t)0x89)
+
+ /* The value of the minimum allowed angle while Rotating gesture mode */
+#define FT5336_RADIAN_VALUE_REG ((uint8_t)0x91)
+
+ /* Maximum offset while Moving Left and Moving Right gesture */
+#define FT5336_OFFSET_LEFT_RIGHT_REG ((uint8_t)0x92)
+
+ /* Maximum offset while Moving Up and Moving Down gesture */
+#define FT5336_OFFSET_UP_DOWN_REG ((uint8_t)0x93)
+
+ /* Minimum distance while Moving Left and Moving Right gesture */
+#define FT5336_DISTANCE_LEFT_RIGHT_REG ((uint8_t)0x94)
+
+ /* Minimum distance while Moving Up and Moving Down gesture */
+#define FT5336_DISTANCE_UP_DOWN_REG ((uint8_t)0x95)
+
+ /* Maximum distance while Zoom In and Zoom Out gesture */
+#define FT5336_DISTANCE_ZOOM_REG ((uint8_t)0x96)
+
+ /* High 8-bit of LIB Version info */
+#define FT5336_LIB_VER_H_REG ((uint8_t)0xA1)
+
+ /* Low 8-bit of LIB Version info */
+#define FT5336_LIB_VER_L_REG ((uint8_t)0xA2)
+
+ /* Chip Selecting */
+#define FT5336_CIPHER_REG ((uint8_t)0xA3)
+
+ /* Interrupt mode register (used when in interrupt mode) */
+#define FT5336_GMODE_REG ((uint8_t)0xA4)
+
+#define FT5336_G_MODE_INTERRUPT_MASK ((uint8_t)0x03)
+#define FT5336_G_MODE_INTERRUPT_SHIFT ((uint8_t)0x00)
+
+ /* Possible values of FT5336_GMODE_REG */
+#define FT5336_G_MODE_INTERRUPT_POLLING ((uint8_t)0x00)
+#define FT5336_G_MODE_INTERRUPT_TRIGGER ((uint8_t)0x01)
+
+ /* Current power mode the FT5336 system is in (R) */
+#define FT5336_PWR_MODE_REG ((uint8_t)0xA5)
+
+ /* FT5336 firmware version */
+#define FT5336_FIRMID_REG ((uint8_t)0xA6)
+
+ /* FT5336 Chip identification register */
+#define FT5336_CHIP_ID_REG ((uint8_t)0xA8)
+
+ /* Possible values of FT5336_CHIP_ID_REG */
+#define FT5336_ID_VALUE ((uint8_t)0x51)
+
+ /* Release code version */
+#define FT5336_RELEASE_CODE_ID_REG ((uint8_t)0xAF)
+
+ /* Current operating mode the FT5336 system is in (R) */
+#define FT5336_STATE_REG ((uint8_t)0xBC)
+
+ /**
+ * @}
+ */
+
+ /* Exported macro ------------------------------------------------------------*/
+
+ /** @defgroup ft5336_Exported_Macros
+ * @{
+ */
+
+ /* Exported functions --------------------------------------------------------*/
+
+ /** @defgroup ft5336_Exported_Functions
+ * @{
+ */
+
+ /**
+ * @brief ft5336 Control functions
+ */
+
+
+/**
+ * @brief Initialize the ft5336 communication bus
+ * from MCU to FT5336 : ie I2C channel initialization (if required).
+ * @param DeviceAddr: Device address on communication Bus (I2C slave address of FT5336).
+ * @retval None
+ */
+void ft5336_Init(uint16_t DeviceAddr);
+
+/**
+ * @brief Software Reset the ft5336.
+ * @param DeviceAddr: Device address on communication Bus (I2C slave address of FT5336).
+ * @retval None
+ */
+void ft5336_Reset(uint16_t DeviceAddr);
+
+/**
+ * @brief Read the ft5336 device ID, pre initialize I2C in case of need to be
+ * able to read the FT5336 device ID, and verify this is a FT5336.
+ * @param DeviceAddr: I2C FT5336 Slave address.
+ * @retval The Device ID (two bytes).
+ */
+uint16_t ft5336_ReadID(uint16_t DeviceAddr);
+
+/**
+ * @brief Configures the touch Screen IC device to start detecting touches
+ * @param DeviceAddr: Device address on communication Bus (I2C slave address).
+ * @retval None.
+ */
+void ft5336_TS_Start(uint16_t DeviceAddr);
+
+/**
+ * @brief Return if there is touches detected or not.
+ * Try to detect new touches and forget the old ones (reset internal global
+ * variables).
+ * @param DeviceAddr: Device address on communication Bus.
+ * @retval : Number of active touches detected (can be 0, 1 or 2).
+ */
+uint8_t ft5336_TS_DetectTouch(uint16_t DeviceAddr);
+
+/**
+ * @brief Get the touch screen X and Y positions values
+ * Manage multi touch thanks to touch Index global
+ * variable 'ft5336_handle.currActiveTouchIdx'.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @param X: Pointer to X position value
+ * @param Y: Pointer to Y position value
+ * @retval None.
+ */
+void ft5336_TS_GetXY(uint16_t DeviceAddr, uint16_t *X, uint16_t *Y);
+
+/**
+ * @brief Configure the FT5336 device to generate IT on given INT pin
+ * connected to MCU as EXTI.
+ * @param DeviceAddr: Device address on communication Bus (Slave I2C address of FT5336).
+ * @retval None
+ */
+void ft5336_TS_EnableIT(uint16_t DeviceAddr);
+
+/**
+ * @brief Configure the FT5336 device to stop generating IT on the given INT pin
+ * connected to MCU as EXTI.
+ * @param DeviceAddr: Device address on communication Bus (Slave I2C address of FT5336).
+ * @retval None
+ */
+void ft5336_TS_DisableIT(uint16_t DeviceAddr);
+
+/**
+ * @brief Get IT status from FT5336 interrupt status registers
+ * Should be called Following an EXTI coming to the MCU to know the detailed
+ * reason of the interrupt.
+ * @param DeviceAddr: Device address on communication Bus (I2C slave address of FT5336).
+ * @retval TS interrupts status
+ */
+uint8_t ft5336_TS_ITStatus (uint16_t DeviceAddr);
+
+/**
+ * @brief Clear IT status in FT5336 interrupt status clear registers
+ * Should be called Following an EXTI coming to the MCU.
+ * @param DeviceAddr: Device address on communication Bus (I2C slave address of FT5336).
+ * @retval TS interrupts status
+ */
+void ft5336_TS_ClearIT (uint16_t DeviceAddr);
+
+/**** NEW FEATURES enabled when Multi-touch support is enabled ****/
+
+#if (TS_MULTI_TOUCH_SUPPORTED == 1)
+
+/**
+ * @brief Get the last touch gesture identification (zoom, move up/down...).
+ * @param DeviceAddr: Device address on communication Bus (I2C slave address of FT5336).
+ * @param pGestureId : Pointer to get last touch gesture Identification.
+ * @retval None.
+ */
+void ft5336_TS_GetGestureID(uint16_t DeviceAddr, uint32_t * pGestureId);
+
+/**
+ * @brief Get the touch detailed informations on touch number 'touchIdx' (0..1)
+ * This touch detailed information contains :
+ * - weight that was applied to this touch
+ * - sub-area of the touch in the touch panel
+ * - event of linked to the touch (press down, lift up, ...)
+ * @param DeviceAddr: Device address on communication Bus (I2C slave address of FT5336).
+ * @param touchIdx : Passed index of the touch (0..1) on which we want to get the
+ * detailed information.
+ * @param pWeight : Pointer to to get the weight information of 'touchIdx'.
+ * @param pArea : Pointer to to get the sub-area information of 'touchIdx'.
+ * @param pEvent : Pointer to to get the event information of 'touchIdx'.
+
+ * @retval None.
+ */
+void ft5336_TS_GetTouchInfo(uint16_t DeviceAddr,
+ uint32_t touchIdx,
+ uint32_t * pWeight,
+ uint32_t * pArea,
+ uint32_t * pEvent);
+
+#endif /* TS_MULTI_TOUCH_SUPPORTED == 1 */
+
+/* Imported TS IO functions --------------------------------------------------------*/
+
+/** @defgroup ft5336_Imported_Functions
+ * @{
+ */
+
+/* TouchScreen (TS) external IO functions */
+extern void TS_IO_Init(void);
+extern void TS_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
+extern uint8_t TS_IO_Read(uint8_t Addr, uint8_t Reg);
+extern void TS_IO_Delay(uint32_t Delay);
+
+ /**
+ * @}
+ */
+
+ /* Imported global variables --------------------------------------------------------*/
+
+ /** @defgroup ft5336_Imported_Globals
+ * @{
+ */
+
+
+/* Touch screen driver structure */
+extern TS_DrvTypeDef ft5336_ts_drv;
+
+ /**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* __FT5336_H */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/n25q128a.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,219 @@
+/**
+ ******************************************************************************
+ * @file n25q128a.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 29-May-2015
+ * @brief This file contains all the description of the N25Q128A QSPI memory.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __N25Q128A_H
+#define __N25Q128A_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup Components
+ * @{
+ */
+
+/** @addtogroup n25q128a
+ * @{
+ */
+
+/** @defgroup N25Q128A_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup N25Q128A_Exported_Constants
+ * @{
+ */
+
+/**
+ * @brief N25Q128A Configuration
+ */
+#define N25Q128A_FLASH_SIZE 0x1000000 /* 128 MBits => 16MBytes */
+#define N25Q128A_SECTOR_SIZE 0x10000 /* 256 sectors of 64KBytes */
+#define N25Q128A_SUBSECTOR_SIZE 0x1000 /* 4096 subsectors of 4kBytes */
+#define N25Q128A_PAGE_SIZE 0x100 /* 65536 pages of 256 bytes */
+
+#define N25Q128A_DUMMY_CYCLES_READ 8
+#define N25Q128A_DUMMY_CYCLES_READ_QUAD 10
+
+#define N25Q128A_BULK_ERASE_MAX_TIME 250000
+#define N25Q128A_SECTOR_ERASE_MAX_TIME 3000
+#define N25Q128A_SUBSECTOR_ERASE_MAX_TIME 800
+
+/**
+ * @brief N25Q128A Commands
+ */
+/* Reset Operations */
+#define RESET_ENABLE_CMD 0x66
+#define RESET_MEMORY_CMD 0x99
+
+/* Identification Operations */
+#define READ_ID_CMD 0x9E
+#define READ_ID_CMD2 0x9F
+#define MULTIPLE_IO_READ_ID_CMD 0xAF
+#define READ_SERIAL_FLASH_DISCO_PARAM_CMD 0x5A
+
+/* Read Operations */
+#define READ_CMD 0x03
+#define FAST_READ_CMD 0x0B
+#define DUAL_OUT_FAST_READ_CMD 0x3B
+#define DUAL_INOUT_FAST_READ_CMD 0xBB
+#define QUAD_OUT_FAST_READ_CMD 0x6B
+#define QUAD_INOUT_FAST_READ_CMD 0xEB
+
+/* Write Operations */
+#define WRITE_ENABLE_CMD 0x06
+#define WRITE_DISABLE_CMD 0x04
+
+/* Register Operations */
+#define READ_STATUS_REG_CMD 0x05
+#define WRITE_STATUS_REG_CMD 0x01
+
+#define READ_LOCK_REG_CMD 0xE8
+#define WRITE_LOCK_REG_CMD 0xE5
+
+#define READ_FLAG_STATUS_REG_CMD 0x70
+#define CLEAR_FLAG_STATUS_REG_CMD 0x50
+
+#define READ_NONVOL_CFG_REG_CMD 0xB5
+#define WRITE_NONVOL_CFG_REG_CMD 0xB1
+
+#define READ_VOL_CFG_REG_CMD 0x85
+#define WRITE_VOL_CFG_REG_CMD 0x81
+
+#define READ_ENHANCED_VOL_CFG_REG_CMD 0x65
+#define WRITE_ENHANCED_VOL_CFG_REG_CMD 0x61
+
+/* Program Operations */
+#define PAGE_PROG_CMD 0x02
+#define DUAL_IN_FAST_PROG_CMD 0xA2
+#define EXT_DUAL_IN_FAST_PROG_CMD 0xD2
+#define QUAD_IN_FAST_PROG_CMD 0x32
+#define EXT_QUAD_IN_FAST_PROG_CMD 0x12
+
+/* Erase Operations */
+#define SUBSECTOR_ERASE_CMD 0x20
+#define SECTOR_ERASE_CMD 0xD8
+#define BULK_ERASE_CMD 0xC7
+
+#define PROG_ERASE_RESUME_CMD 0x7A
+#define PROG_ERASE_SUSPEND_CMD 0x75
+
+/* One-Time Programmable Operations */
+#define READ_OTP_ARRAY_CMD 0x4B
+#define PROG_OTP_ARRAY_CMD 0x42
+
+/**
+ * @brief N25Q128A Registers
+ */
+/* Status Register */
+#define N25Q128A_SR_WIP ((uint8_t)0x01) /*!< Write in progress */
+#define N25Q128A_SR_WREN ((uint8_t)0x02) /*!< Write enable latch */
+#define N25Q128A_SR_BLOCKPR ((uint8_t)0x5C) /*!< Block protected against program and erase operations */
+#define N25Q128A_SR_PRBOTTOM ((uint8_t)0x20) /*!< Protected memory area defined by BLOCKPR starts from top or bottom */
+#define N25Q128A_SR_SRWREN ((uint8_t)0x80) /*!< Status register write enable/disable */
+
+/* Nonvolatile Configuration Register */
+#define N25Q128A_NVCR_LOCK ((uint16_t)0x0001) /*!< Lock nonvolatile configuration register */
+#define N25Q128A_NVCR_DUAL ((uint16_t)0x0004) /*!< Dual I/O protocol */
+#define N25Q128A_NVCR_QUAB ((uint16_t)0x0008) /*!< Quad I/O protocol */
+#define N25Q128A_NVCR_RH ((uint16_t)0x0010) /*!< Reset/hold */
+#define N25Q128A_NVCR_ODS ((uint16_t)0x01C0) /*!< Output driver strength */
+#define N25Q128A_NVCR_XIP ((uint16_t)0x0E00) /*!< XIP mode at power-on reset */
+#define N25Q128A_NVCR_NB_DUMMY ((uint16_t)0xF000) /*!< Number of dummy clock cycles */
+
+/* Volatile Configuration Register */
+#define N25Q128A_VCR_WRAP ((uint8_t)0x03) /*!< Wrap */
+#define N25Q128A_VCR_XIP ((uint8_t)0x08) /*!< XIP */
+#define N25Q128A_VCR_NB_DUMMY ((uint8_t)0xF0) /*!< Number of dummy clock cycles */
+
+/* Enhanced Volatile Configuration Register */
+#define N25Q128A_EVCR_ODS ((uint8_t)0x07) /*!< Output driver strength */
+#define N25Q128A_EVCR_VPPA ((uint8_t)0x08) /*!< Vpp accelerator */
+#define N25Q128A_EVCR_RH ((uint8_t)0x10) /*!< Reset/hold */
+#define N25Q128A_EVCR_DUAL ((uint8_t)0x40) /*!< Dual I/O protocol */
+#define N25Q128A_EVCR_QUAD ((uint8_t)0x80) /*!< Quad I/O protocol */
+
+/* Flag Status Register */
+#define N25Q128A_FSR_PRERR ((uint8_t)0x02) /*!< Protection error */
+#define N25Q128A_FSR_PGSUS ((uint8_t)0x04) /*!< Program operation suspended */
+#define N25Q128A_FSR_VPPERR ((uint8_t)0x08) /*!< Invalid voltage during program or erase */
+#define N25Q128A_FSR_PGERR ((uint8_t)0x10) /*!< Program error */
+#define N25Q128A_FSR_ERERR ((uint8_t)0x20) /*!< Erase error */
+#define N25Q128A_FSR_ERSUS ((uint8_t)0x40) /*!< Erase operation suspended */
+#define N25Q128A_FSR_READY ((uint8_t)0x80) /*!< Ready or command in progress */
+
+/**
+ * @}
+ */
+
+/** @defgroup N25Q128A_Exported_Functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __N25Q128A_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/ov9655.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,861 @@
+/**
+ ******************************************************************************
+ * @file ov9655.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file provides the OV9655 camera driver
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "ov9655.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup Components
+ * @{
+ */
+
+/** @addtogroup OV9655
+ * @brief This file provides a set of functions needed to drive the
+ * OV9655 Camera module.
+ * @{
+ */
+
+/** @defgroup OV9655_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup OV9655_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup OV9655_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup OV9655_Private_FunctionPrototypes
+ * @{
+ */
+static uint64_t ov9655_ConvertValue(uint32_t feature, uint32_t value);
+/**
+ * @}
+ */
+
+/** @defgroup OV9655_Private_Variables
+ * @{
+ */
+
+CAMERA_DrvTypeDef ov9655_drv =
+{
+ ov9655_Init,
+ ov9655_ReadID,
+ ov9655_Config,
+};
+
+/* Initialization sequence for VGA resolution (640x480)*/
+const unsigned char OV9655_VGA[][2]=
+{
+ {0x00, 0x00},
+ {0x01, 0x80},
+ {0x02, 0x80},
+ {0xb5, 0x00},
+ {0x35, 0x00},
+ {0xa8, 0xc1},
+ {0x3a, 0xcc},
+ {0x3d, 0x99},
+ {0x77, 0x02},
+ {0x13, 0xe7},
+ {0x26, 0x72},
+ {0x27, 0x08},
+ {0x28, 0x08},
+ {0x2c, 0x08},
+ {0xab, 0x04},
+ {0x6e, 0x00},
+ {0x6d, 0x55},
+ {0x00, 0x11},
+ {0x10, 0x7b},
+ {0xbb, 0xae},
+ {0x11, 0x03},
+ {0x72, 0x00},
+ {0x3e, 0x0c},
+ {0x74, 0x3a},
+ {0x76, 0x01},
+ {0x75, 0x35},
+ {0x73, 0x00},
+ {0xc7, 0x80},
+ {0x62, 0x00},
+ {0x63, 0x00},
+ {0x64, 0x02},
+ {0x65, 0x20},
+ {0x66, 0x01},
+ {0xc3, 0x4e},
+ {0x33, 0x00},
+ {0xa4, 0x50},
+ {0xaa, 0x92},
+ {0xc2, 0x01},
+ {0xc1, 0xc8},
+ {0x1e, 0x04},
+ {0xa9, 0xef},
+ {0x0e, 0x61},
+ {0x39, 0x57},
+ {0x0f, 0x48},
+ {0x24, 0x3c},
+ {0x25, 0x36},
+ {0x12, 0x63},
+ {0x03, 0x12},
+ {0x32, 0xff},
+ {0x17, 0x16},
+ {0x18, 0x02},
+ {0x19, 0x01},
+ {0x1a, 0x3d},
+ {0x36, 0xfa},
+ {0x69, 0x0a},
+ {0x8c, 0x8d},
+ {0xc0, 0xaa},
+ {0x40, 0xd0},
+ {0x43, 0x14},
+ {0x44, 0xf0},
+ {0x45, 0x46},
+ {0x46, 0x62},
+ {0x47, 0x2a},
+ {0x48, 0x3c},
+ {0x59, 0x85},
+ {0x5a, 0xa9},
+ {0x5b, 0x64},
+ {0x5c, 0x84},
+ {0x5d, 0x53},
+ {0x5e, 0x0e},
+ {0x6c, 0x0c},
+ {0xc6, 0x85},
+ {0xcb, 0xf0},
+ {0xcc, 0xd8},
+ {0x71, 0x78},
+ {0xa5, 0x68},
+ {0x6f, 0x9e},
+ {0x42, 0xc0},
+ {0x3f, 0x82},
+ {0x8a, 0x23},
+ {0x14, 0x3a},
+ {0x3b, 0xcc},
+ {0x34, 0x3d},
+ {0x41, 0x40},
+ {0xc9, 0xe0},
+ {0xca, 0xe8},
+ {0xcd, 0x93},
+ {0x7a, 0x20},
+ {0x7b, 0x1c},
+ {0x7c, 0x28},
+ {0x7d, 0x3c},
+ {0x7e, 0x5a},
+ {0x7f, 0x68},
+ {0x80, 0x76},
+ {0x81, 0x80},
+ {0x82, 0x88},
+ {0x83, 0x8f},
+ {0x84, 0x96},
+ {0x85, 0xa3},
+ {0x86, 0xaf},
+ {0x87, 0xc4},
+ {0x88, 0xd7},
+ {0x89, 0xe8},
+ {0x4f, 0x98},
+ {0x50, 0x98},
+ {0x51, 0x00},
+ {0x52, 0x28},
+ {0x53, 0x70},
+ {0x54, 0x98},
+ {0x58, 0x1a},
+ {0x6b, 0x5a},
+ {0x90, 0x92},
+ {0x91, 0x92},
+ {0x9f, 0x90},
+ {0xa0, 0x90},
+ {0x16, 0x24},
+ {0x2a, 0x00},
+ {0x2b, 0x00},
+ {0xac, 0x80},
+ {0xad, 0x80},
+ {0xae, 0x80},
+ {0xaf, 0x80},
+ {0xb2, 0xf2},
+ {0xb3, 0x20},
+ {0xb4, 0x20},
+ {0xb6, 0xaf},
+ {0x29, 0x15},
+ {0x9d, 0x02},
+ {0x9e, 0x02},
+ {0x9e, 0x02},
+ {0x04, 0x03},
+ {0x05, 0x2e},
+ {0x06, 0x2e},
+ {0x07, 0x2e},
+ {0x08, 0x2e},
+ {0x2f, 0x2e},
+ {0x4a, 0xe9},
+ {0x4b, 0xdd},
+ {0x4c, 0xdd},
+ {0x4d, 0xdd},
+ {0x4e, 0xdd},
+ {0x70, 0x06},
+ {0xa6, 0x40},
+ {0xbc, 0x02},
+ {0xbd, 0x01},
+ {0xbe, 0x02},
+ {0xbf, 0x01},
+};
+
+/* Initialization sequence for QVGA resolution (320x240) */
+const unsigned char OV9655_QVGA[][2]=
+{
+ {0x00, 0x00},
+ {0x01, 0x80},
+ {0x02, 0x80},
+ {0x03, 0x02},
+ {0x04, 0x03},
+ {0x09, 0x01},
+ {0x0b, 0x57},
+ {0x0e, 0x61},
+ {0x0f, 0x40},
+ {0x11, 0x01},
+ {0x12, 0x62},
+ {0x13, 0xc7},
+ {0x14, 0x3a},
+ {0x16, 0x24},
+ {0x17, 0x18},
+ {0x18, 0x04},
+ {0x19, 0x01},
+ {0x1a, 0x81},
+ {0x1e, 0x00},
+ {0x24, 0x3c},
+ {0x25, 0x36},
+ {0x26, 0x72},
+ {0x27, 0x08},
+ {0x28, 0x08},
+ {0x29, 0x15},
+ {0x2a, 0x00},
+ {0x2b, 0x00},
+ {0x2c, 0x08},
+ {0x32, 0x12},
+ {0x33, 0x00},
+ {0x34, 0x3f},
+ {0x35, 0x00},
+ {0x36, 0x3a},
+ {0x38, 0x72},
+ {0x39, 0x57},
+ {0x3a, 0xcc},
+ {0x3b, 0x04},
+ {0x3d, 0x99},
+ {0x3e, 0x02},
+ {0x3f, 0xc1},
+ {0x40, 0xc0},
+ {0x41, 0x41},
+ {0x42, 0xc0},
+ {0x43, 0x0a},
+ {0x44, 0xf0},
+ {0x45, 0x46},
+ {0x46, 0x62},
+ {0x47, 0x2a},
+ {0x48, 0x3c},
+ {0x4a, 0xfc},
+ {0x4b, 0xfc},
+ {0x4c, 0x7f},
+ {0x4d, 0x7f},
+ {0x4e, 0x7f},
+ {0x4f, 0x98},
+ {0x50, 0x98},
+ {0x51, 0x00},
+ {0x52, 0x28},
+ {0x53, 0x70},
+ {0x54, 0x98},
+ {0x58, 0x1a},
+ {0x59, 0x85},
+ {0x5a, 0xa9},
+ {0x5b, 0x64},
+ {0x5c, 0x84},
+ {0x5d, 0x53},
+ {0x5e, 0x0e},
+ {0x5f, 0xf0},
+ {0x60, 0xf0},
+ {0x61, 0xf0},
+ {0x62, 0x00},
+ {0x63, 0x00},
+ {0x64, 0x02},
+ {0x65, 0x20},
+ {0x66, 0x00},
+ {0x69, 0x0a},
+ {0x6b, 0x5a},
+ {0x6c, 0x04},
+ {0x6d, 0x55},
+ {0x6e, 0x00},
+ {0x6f, 0x9d},
+ {0x70, 0x21},
+ {0x71, 0x78},
+ {0x72, 0x11},
+ {0x73, 0x01},
+ {0x74, 0x10},
+ {0x75, 0x10},
+ {0x76, 0x01},
+ {0x77, 0x02},
+ {0x7A, 0x12},
+ {0x7B, 0x08},
+ {0x7C, 0x16},
+ {0x7D, 0x30},
+ {0x7E, 0x5e},
+ {0x7F, 0x72},
+ {0x80, 0x82},
+ {0x81, 0x8e},
+ {0x82, 0x9a},
+ {0x83, 0xa4},
+ {0x84, 0xac},
+ {0x85, 0xb8},
+ {0x86, 0xc3},
+ {0x87, 0xd6},
+ {0x88, 0xe6},
+ {0x89, 0xf2},
+ {0x8a, 0x24},
+ {0x8c, 0x80},
+ {0x90, 0x7d},
+ {0x91, 0x7b},
+ {0x9d, 0x02},
+ {0x9e, 0x02},
+ {0x9f, 0x7a},
+ {0xa0, 0x79},
+ {0xa1, 0x40},
+ {0xa4, 0x50},
+ {0xa5, 0x68},
+ {0xa6, 0x4a},
+ {0xa8, 0xc1},
+ {0xa9, 0xef},
+ {0xaa, 0x92},
+ {0xab, 0x04},
+ {0xac, 0x80},
+ {0xad, 0x80},
+ {0xae, 0x80},
+ {0xaf, 0x80},
+ {0xb2, 0xf2},
+ {0xb3, 0x20},
+ {0xb4, 0x20},
+ {0xb5, 0x00},
+ {0xb6, 0xaf},
+ {0xb6, 0xaf},
+ {0xbb, 0xae},
+ {0xbc, 0x7f},
+ {0xbd, 0x7f},
+ {0xbe, 0x7f},
+ {0xbf, 0x7f},
+ {0xbf, 0x7f},
+ {0xc0, 0xaa},
+ {0xc1, 0xc0},
+ {0xc2, 0x01},
+ {0xc3, 0x4e},
+ {0xc6, 0x05},
+ {0xc7, 0x81},
+ {0xc9, 0xe0},
+ {0xca, 0xe8},
+ {0xcb, 0xf0},
+ {0xcc, 0xd8},
+ {0xcd, 0x93},
+ {0x12, 0x63},
+ {0x40, 0x10},
+};
+
+/* Initialization sequence for QQVGA resolution (160x120) */
+const char OV9655_QQVGA[][2]=
+{
+ {0x00, 0x00},
+ {0x01, 0x80},
+ {0x02, 0x80},
+ {0x03, 0x02},
+ {0x04, 0x03},
+ {0x09, 0x01},
+ {0x0b, 0x57},
+ {0x0e, 0x61},
+ {0x0f, 0x40},
+ {0x11, 0x01},
+ {0x12, 0x62},
+ {0x13, 0xc7},
+ {0x14, 0x3a},
+ {0x16, 0x24},
+ {0x17, 0x18},
+ {0x18, 0x04},
+ {0x19, 0x01},
+ {0x1a, 0x81},
+ {0x1e, 0x00},
+ {0x24, 0x3c},
+ {0x25, 0x36},
+ {0x26, 0x72},
+ {0x27, 0x08},
+ {0x28, 0x08},
+ {0x29, 0x15},
+ {0x2a, 0x00},
+ {0x2b, 0x00},
+ {0x2c, 0x08},
+ {0x32, 0xa4},
+ {0x33, 0x00},
+ {0x34, 0x3f},
+ {0x35, 0x00},
+ {0x36, 0x3a},
+ {0x38, 0x72},
+ {0x39, 0x57},
+ {0x3a, 0xcc},
+ {0x3b, 0x04},
+ {0x3d, 0x99},
+ {0x3e, 0x0e},
+ {0x3f, 0xc1},
+ {0x40, 0xc0},
+ {0x41, 0x41},
+ {0x42, 0xc0},
+ {0x43, 0x0a},
+ {0x44, 0xf0},
+ {0x45, 0x46},
+ {0x46, 0x62},
+ {0x47, 0x2a},
+ {0x48, 0x3c},
+ {0x4a, 0xfc},
+ {0x4b, 0xfc},
+ {0x4c, 0x7f},
+ {0x4d, 0x7f},
+ {0x4e, 0x7f},
+ {0x4f, 0x98},
+ {0x50, 0x98},
+ {0x51, 0x00},
+ {0x52, 0x28},
+ {0x53, 0x70},
+ {0x54, 0x98},
+ {0x58, 0x1a},
+ {0x59, 0x85},
+ {0x5a, 0xa9},
+ {0x5b, 0x64},
+ {0x5c, 0x84},
+ {0x5d, 0x53},
+ {0x5e, 0x0e},
+ {0x5f, 0xf0},
+ {0x60, 0xf0},
+ {0x61, 0xf0},
+ {0x62, 0x00},
+ {0x63, 0x00},
+ {0x64, 0x02},
+ {0x65, 0x20},
+ {0x66, 0x00},
+ {0x69, 0x0a},
+ {0x6b, 0x5a},
+ {0x6c, 0x04},
+ {0x6d, 0x55},
+ {0x6e, 0x00},
+ {0x6f, 0x9d},
+ {0x70, 0x21},
+ {0x71, 0x78},
+ {0x72, 0x22},
+ {0x73, 0x02},
+ {0x74, 0x10},
+ {0x75, 0x10},
+ {0x76, 0x01},
+ {0x77, 0x02},
+ {0x7A, 0x12},
+ {0x7B, 0x08},
+ {0x7C, 0x16},
+ {0x7D, 0x30},
+ {0x7E, 0x5e},
+ {0x7F, 0x72},
+ {0x80, 0x82},
+ {0x81, 0x8e},
+ {0x82, 0x9a},
+ {0x83, 0xa4},
+ {0x84, 0xac},
+ {0x85, 0xb8},
+ {0x86, 0xc3},
+ {0x87, 0xd6},
+ {0x88, 0xe6},
+ {0x89, 0xf2},
+ {0x8a, 0x24},
+ {0x8c, 0x80},
+ {0x90, 0x7d},
+ {0x91, 0x7b},
+ {0x9d, 0x02},
+ {0x9e, 0x02},
+ {0x9f, 0x7a},
+ {0xa0, 0x79},
+ {0xa1, 0x40},
+ {0xa4, 0x50},
+ {0xa5, 0x68},
+ {0xa6, 0x4a},
+ {0xa8, 0xc1},
+ {0xa9, 0xef},
+ {0xaa, 0x92},
+ {0xab, 0x04},
+ {0xac, 0x80},
+ {0xad, 0x80},
+ {0xae, 0x80},
+ {0xaf, 0x80},
+ {0xb2, 0xf2},
+ {0xb3, 0x20},
+ {0xb4, 0x20},
+ {0xb5, 0x00},
+ {0xb6, 0xaf},
+ {0xb6, 0xaf},
+ {0xbb, 0xae},
+ {0xbc, 0x7f},
+ {0xbd, 0x7f},
+ {0xbe, 0x7f},
+ {0xbf, 0x7f},
+ {0xbf, 0x7f},
+ {0xc0, 0xaa},
+ {0xc1, 0xc0},
+ {0xc2, 0x01},
+ {0xc3, 0x4e},
+ {0xc6, 0x05},
+ {0xc7, 0x82},
+ {0xc9, 0xe0},
+ {0xca, 0xe8},
+ {0xcb, 0xf0},
+ {0xcc, 0xd8},
+ {0xcd, 0x93},
+ {0x12, 0x63},
+ {0x40, 0x10},
+};
+
+/**
+ * @}
+ */
+
+/** @defgroup OV9655_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes the OV9655 CAMERA component.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @param resolution: Camera resolution
+ * @retval None
+ */
+void ov9655_Init(uint16_t DeviceAddr, uint32_t resolution)
+{
+ uint32_t index;
+
+ /* Initialize I2C */
+ CAMERA_IO_Init();
+
+ /* Prepare the camera to be configured by resetting all its registers */
+ CAMERA_IO_Write(DeviceAddr, OV9655_SENSOR_COM7, 0x80);
+ CAMERA_Delay(200);
+
+ /* Initialize OV9655 */
+ switch (resolution)
+ {
+ case CAMERA_R160x120:
+ {
+ for(index=0; index<(sizeof(OV9655_QQVGA)/2); index++)
+ {
+ CAMERA_IO_Write(DeviceAddr, OV9655_QQVGA[index][0], OV9655_QQVGA[index][1]);
+ CAMERA_Delay(2);
+ }
+ break;
+ }
+ case CAMERA_R320x240:
+ {
+ for(index=0; index<(sizeof(OV9655_QVGA)/2); index++)
+ {
+ CAMERA_IO_Write(DeviceAddr, OV9655_QVGA[index][0], OV9655_QVGA[index][1]);
+ CAMERA_Delay(2);
+ }
+ break;
+ }
+ case CAMERA_R480x272:
+ {
+ /* Not supported resolution */
+ break;
+ }
+ case CAMERA_R640x480:
+ {
+ for(index=0; index<(sizeof(OV9655_VGA)/2); index++)
+ {
+ CAMERA_IO_Write(DeviceAddr, OV9655_VGA[index][0], OV9655_VGA[index][1]);
+ CAMERA_Delay(2);
+ }
+ break;
+ }
+ default:
+ {
+ break;
+ }
+ }
+}
+
+/**
+ * @brief Configures the OV9655 camera feature.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @param feature: Camera feature to be configured
+ * @param value: Value to be configured
+ * @param brightness_value: Brightness value to be configured
+ * @retval None
+ */
+void ov9655_Config(uint16_t DeviceAddr, uint32_t feature, uint32_t value, uint32_t brightness_value)
+{
+ uint8_t tslb, mtx1, mtx2, mtx3, mtx4, mtx5, mtx6;
+ uint64_t value_tmp;
+ uint32_t br_value;
+
+ /* Convert the input value into ov9655 parameters */
+ value_tmp = ov9655_ConvertValue(feature, value);
+ br_value = (uint32_t)ov9655_ConvertValue(CAMERA_CONTRAST_BRIGHTNESS, brightness_value);
+
+ switch(feature)
+ {
+ case CAMERA_CONTRAST_BRIGHTNESS:
+ {
+ CAMERA_IO_Write(DeviceAddr, OV9655_SENSOR_BRTN, br_value);
+ CAMERA_IO_Write(DeviceAddr, OV9655_SENSOR_CNST1, value_tmp);
+ break;
+ }
+ case CAMERA_BLACK_WHITE:
+ case CAMERA_COLOR_EFFECT:
+ {
+ tslb = (uint8_t)(value_tmp >> 48);
+ mtx1 = (uint8_t)(value_tmp >> 40);
+ mtx2 = (uint8_t)(value_tmp >> 32);
+ mtx3 = (uint8_t)(value_tmp >> 24);
+ mtx4 = (uint8_t)(value_tmp >> 16);
+ mtx5 = (uint8_t)(value_tmp >> 8);
+ mtx6 = (uint8_t)(value_tmp);
+ CAMERA_IO_Write(DeviceAddr, OV9655_SENSOR_TSLB, tslb);
+ CAMERA_IO_Write(DeviceAddr, OV9655_SENSOR_MTX1, mtx1);
+ CAMERA_IO_Write(DeviceAddr, OV9655_SENSOR_MTX2, mtx2);
+ CAMERA_IO_Write(DeviceAddr, OV9655_SENSOR_MTX3, mtx3);
+ CAMERA_IO_Write(DeviceAddr, OV9655_SENSOR_MTX4, mtx4);
+ CAMERA_IO_Write(DeviceAddr, OV9655_SENSOR_MTX5, mtx5);
+ CAMERA_IO_Write(DeviceAddr, OV9655_SENSOR_MTX6, mtx6);
+ break;
+ }
+ default:
+ {
+ break;
+ }
+ }
+}
+
+/**
+ * @brief Read the OV9655 Camera identity.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @retval the OV9655 ID
+ */
+uint16_t ov9655_ReadID(uint16_t DeviceAddr)
+{
+ /* Initialize I2C */
+ CAMERA_IO_Init();
+
+ /* Get the camera ID */
+ return (CAMERA_IO_Read(DeviceAddr, OV9655_SENSOR_PIDH));
+}
+
+/******************************************************************************
+ Static Functions
+*******************************************************************************/
+/**
+ * @brief Convert input values into ov9655 parameters.
+ * @param feature: Camera feature to be configured
+ * @param value: Value to be configured
+ * @retval The converted value
+ */
+static uint64_t ov9655_ConvertValue(uint32_t feature, uint32_t value)
+{
+ uint64_t ret = 0;
+
+ switch(feature)
+ {
+ case CAMERA_BLACK_WHITE:
+ {
+ switch(value)
+ {
+ case CAMERA_BLACK_WHITE_BW:
+ {
+ ret = OV9655_BLACK_WHITE_BW;
+ break;
+ }
+ case CAMERA_BLACK_WHITE_NEGATIVE:
+ {
+ ret = OV9655_BLACK_WHITE_NEGATIVE;
+ break;
+ }
+ case CAMERA_BLACK_WHITE_BW_NEGATIVE:
+ {
+ ret = OV9655_BLACK_WHITE_BW_NEGATIVE;
+ break;
+ }
+ case CAMERA_BLACK_WHITE_NORMAL:
+ {
+ ret = OV9655_BLACK_WHITE_NORMAL;
+ break;
+ }
+ default:
+ {
+ ret = OV9655_BLACK_WHITE_NORMAL;
+ break;
+ }
+ }
+ break;
+ }
+ case CAMERA_CONTRAST_BRIGHTNESS:
+ {
+ switch(value)
+ {
+ case CAMERA_BRIGHTNESS_LEVEL0:
+ {
+ ret = OV9655_BRIGHTNESS_LEVEL0;
+ break;
+ }
+ case CAMERA_BRIGHTNESS_LEVEL1:
+ {
+ ret = OV9655_BRIGHTNESS_LEVEL1;
+ break;
+ }
+ case CAMERA_BRIGHTNESS_LEVEL2:
+ {
+ ret = OV9655_BRIGHTNESS_LEVEL2;
+ break;
+ }
+ case CAMERA_BRIGHTNESS_LEVEL3:
+ {
+ ret = OV9655_BRIGHTNESS_LEVEL3;
+ break;
+ }
+ case CAMERA_BRIGHTNESS_LEVEL4:
+ {
+ ret = OV9655_BRIGHTNESS_LEVEL4;
+ break;
+ }
+ case CAMERA_CONTRAST_LEVEL0:
+ {
+ ret = OV9655_CONTRAST_LEVEL0;
+ break;
+ }
+ case CAMERA_CONTRAST_LEVEL1:
+ {
+ ret = OV9655_CONTRAST_LEVEL1;
+ break;
+ }
+ case CAMERA_CONTRAST_LEVEL2:
+ {
+ ret = OV9655_CONTRAST_LEVEL2;
+ break;
+ }
+ case CAMERA_CONTRAST_LEVEL3:
+ {
+ ret = OV9655_CONTRAST_LEVEL3;
+ break;
+ }
+ case CAMERA_CONTRAST_LEVEL4:
+ {
+ ret = OV9655_CONTRAST_LEVEL4;
+ break;
+ }
+ default:
+ {
+ ret = OV9655_CONTRAST_LEVEL0;
+ break;
+ }
+ }
+ break;
+ }
+ case CAMERA_COLOR_EFFECT:
+ {
+ switch(value)
+ {
+ case CAMERA_COLOR_EFFECT_ANTIQUE:
+ {
+ ret = OV9655_COLOR_EFFECT_ANTIQUE;
+ break;
+ }
+ case CAMERA_COLOR_EFFECT_BLUE:
+ {
+ ret = OV9655_COLOR_EFFECT_BLUE;
+ break;
+ }
+ case CAMERA_COLOR_EFFECT_GREEN:
+ {
+ ret = OV9655_COLOR_EFFECT_GREEN;
+ break;
+ }
+ case CAMERA_COLOR_EFFECT_RED:
+ {
+ ret = OV9655_COLOR_EFFECT_RED;
+ break;
+ }
+ case CAMERA_COLOR_EFFECT_NONE:
+ default:
+ {
+ ret = OV9655_COLOR_EFFECT_NONE;
+ break;
+ }
+ }
+ break;
+ default:
+ {
+ ret = 0;
+ break;
+ }
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/ov9655.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,159 @@
+/**
+ ******************************************************************************
+ * @file ov9655.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file contains all the functions prototypes for the ov9655.c
+ * driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __OV9655_H
+#define __OV9655_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "camera.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup Components
+ * @{
+ */
+
+/** @addtogroup ov9655
+ * @{
+ */
+
+/** @defgroup OV9655_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup OV9655_Exported_Constants
+ * @{
+ */
+/**
+ * @brief OV9655 ID
+ */
+#define OV9655_ID 0x96
+/**
+ * @brief OV9655 Registers
+ */
+
+/* OV9655 Registers definition */
+#define OV9655_SENSOR_PIDH 0x0A
+#define OV9655_SENSOR_PIDL 0x0B
+#define OV9655_SENSOR_COM7 0x12
+#define OV9655_SENSOR_TSLB 0x3A
+#define OV9655_SENSOR_MTX1 0x4F
+#define OV9655_SENSOR_MTX2 0x50
+#define OV9655_SENSOR_MTX3 0x51
+#define OV9655_SENSOR_MTX4 0x52
+#define OV9655_SENSOR_MTX5 0x53
+#define OV9655_SENSOR_MTX6 0x54
+#define OV9655_SENSOR_BRTN 0x55
+#define OV9655_SENSOR_CNST1 0x56
+#define OV9655_SENSOR_CNST2 0x57
+
+/**
+ * @brief OV9655 Features Parameters
+ */
+#define OV9655_BRIGHTNESS_LEVEL0 0xB0 /* Brightness level -2 */
+#define OV9655_BRIGHTNESS_LEVEL1 0x98 /* Brightness level -1 */
+#define OV9655_BRIGHTNESS_LEVEL2 0x00 /* Brightness level 0 */
+#define OV9655_BRIGHTNESS_LEVEL3 0x18 /* Brightness level +1 */
+#define OV9655_BRIGHTNESS_LEVEL4 0x30 /* Brightness level +2 */
+
+#define OV9655_BLACK_WHITE_BW 0xCC000000000000 /* Black and white effect */
+#define OV9655_BLACK_WHITE_NEGATIVE 0xEC808000008080 /* Negative effect */
+#define OV9655_BLACK_WHITE_BW_NEGATIVE 0xEC000000000000 /* BW and Negative effect */
+#define OV9655_BLACK_WHITE_NORMAL 0xCC808000008080 /* Normal effect */
+
+#define OV9655_CONTRAST_LEVEL0 0x30 /* Contrast level -2 */
+#define OV9655_CONTRAST_LEVEL1 0x38 /* Contrast level -1 */
+#define OV9655_CONTRAST_LEVEL2 0x40 /* Contrast level 0 */
+#define OV9655_CONTRAST_LEVEL3 0x50 /* Contrast level +1 */
+#define OV9655_CONTRAST_LEVEL4 0x60 /* Contrast level +2 */
+
+#define OV9655_COLOR_EFFECT_NONE 0xCC808000008080 /* No color effect */
+#define OV9655_COLOR_EFFECT_ANTIQUE 0xCC000020F00000 /* Antique effect */
+#define OV9655_COLOR_EFFECT_BLUE 0xCC000000000060 /* Blue effect */
+#define OV9655_COLOR_EFFECT_GREEN 0xCC000000008000 /* Green effect */
+#define OV9655_COLOR_EFFECT_RED 0xCC600000000000 /* Red effect */
+/**
+ * @}
+ */
+
+/** @defgroup OV9655_Exported_Functions
+ * @{
+ */
+void ov9655_Init(uint16_t DeviceAddr, uint32_t resolution);
+void ov9655_Config(uint16_t DeviceAddr, uint32_t feature, uint32_t value, uint32_t BR_value);
+uint16_t ov9655_ReadID(uint16_t DeviceAddr);
+
+void CAMERA_IO_Init(void);
+void CAMERA_IO_Write(uint8_t addr, uint8_t reg, uint8_t value);
+uint8_t CAMERA_IO_Read(uint8_t addr, uint8_t reg);
+void CAMERA_Delay(uint32_t delay);
+
+/* CAMERA driver structure */
+extern CAMERA_DrvTypeDef ov9655_drv;
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __OV9655_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/rk043fn48h.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,121 @@
+/**
+ ******************************************************************************
+ * @file rk043fn48h.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file contains all the constants parameters for the RK043FN48H-CT672B
+ * LCD component.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __RK043FN48H_H
+#define __RK043FN48H_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup Components
+ * @{
+ */
+
+/** @addtogroup rk043fn48h
+ * @{
+ */
+
+/** @defgroup RK043FN48H_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RK043FN48H_Exported_Constants
+ * @{
+ */
+
+/**
+ * @brief RK043FN48H Size
+ */
+#define RK043FN48H_WIDTH ((uint16_t)480) /* LCD PIXEL WIDTH */
+#define RK043FN48H_HEIGHT ((uint16_t)272) /* LCD PIXEL HEIGHT */
+
+/**
+ * @brief RK043FN48H Timing
+ */
+#define RK043FN48H_HSYNC ((uint16_t)41) /* Horizontal synchronization */
+#define RK043FN48H_HBP ((uint16_t)13) /* Horizontal back porch */
+#define RK043FN48H_HFP ((uint16_t)32) /* Horizontal front porch */
+#define RK043FN48H_VSYNC ((uint16_t)10) /* Vertical synchronization */
+#define RK043FN48H_VBP ((uint16_t)2) /* Vertical back porch */
+#define RK043FN48H_VFP ((uint16_t)2) /* Vertical front porch */
+
+/**
+ * @brief RK043FN48H frequency divider
+ */
+#define RK043FN48H_FREQUENCY_DIVIDER 5 /* LCD Frequency divider */
+/**
+ * @}
+ */
+
+/** @defgroup RK043FN48H_Exported_Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __RK043FN48H_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,903 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file provides a set of firmware functions to manage LEDs,
+ * push-buttons and COM ports available on STM32746G-Discovery
+ * board(MB1191) from STMicroelectronics.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32746g_discovery.h"
+
+// mbed function to replace HAL_Delay function
+void wait_ms(int ms);
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL STM32746G_DISCOVERY_LOW_LEVEL
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Private_TypesDefinitions STM32746G_DISCOVERY_LOW_LEVEL Private Types Definitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Private_Defines STM32746G_DISCOVERY_LOW_LEVEL Private Defines
+ * @{
+ */
+/**
+ * @brief STM32746G DISCOVERY BSP Driver version number V1.0.0
+ */
+#define __STM32746G_DISCO_BSP_VERSION_MAIN (0x01) /*!< [31:24] main version */
+#define __STM32746G_DISCO_BSP_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */
+#define __STM32746G_DISCO_BSP_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32746G_DISCO_BSP_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32746G_DISCO_BSP_VERSION ((__STM32746G_DISCO_BSP_VERSION_MAIN << 24)\
+ |(__STM32746G_DISCO_BSP_VERSION_SUB1 << 16)\
+ |(__STM32746G_DISCO_BSP_VERSION_SUB2 << 8 )\
+ |(__STM32746G_DISCO_BSP_VERSION_RC))
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Private_Macros STM32746G_DISCOVERY_LOW_LEVEL Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Private_Variables STM32746G_DISCOVERY_LOW_LEVEL Private Variables
+ * @{
+ */
+
+const uint32_t GPIO_PIN[LEDn] = {LED1_PIN};
+
+GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {WAKEUP_BUTTON_GPIO_PORT,
+ TAMPER_BUTTON_GPIO_PORT,
+ KEY_BUTTON_GPIO_PORT};
+
+const uint16_t BUTTON_PIN[BUTTONn] = {WAKEUP_BUTTON_PIN,
+ TAMPER_BUTTON_PIN,
+ KEY_BUTTON_PIN};
+
+const uint16_t BUTTON_IRQn[BUTTONn] = {WAKEUP_BUTTON_EXTI_IRQn,
+ TAMPER_BUTTON_EXTI_IRQn,
+ KEY_BUTTON_EXTI_IRQn};
+
+USART_TypeDef* COM_USART[COMn] = {DISCOVERY_COM1};
+
+GPIO_TypeDef* COM_TX_PORT[COMn] = {DISCOVERY_COM1_TX_GPIO_PORT};
+
+GPIO_TypeDef* COM_RX_PORT[COMn] = {DISCOVERY_COM1_RX_GPIO_PORT};
+
+const uint16_t COM_TX_PIN[COMn] = {DISCOVERY_COM1_TX_PIN};
+
+const uint16_t COM_RX_PIN[COMn] = {DISCOVERY_COM1_RX_PIN};
+
+const uint16_t COM_TX_AF[COMn] = {DISCOVERY_COM1_TX_AF};
+
+const uint16_t COM_RX_AF[COMn] = {DISCOVERY_COM1_RX_AF};
+
+static I2C_HandleTypeDef hI2cAudioHandler = {0};
+static I2C_HandleTypeDef hI2cExtHandler = {0};
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Private_FunctionPrototypes STM32746G_DISCOVERY_LOW_LEVEL Private Function Prototypes
+ * @{
+ */
+static void I2Cx_MspInit(I2C_HandleTypeDef *i2c_handler);
+static void I2Cx_Init(I2C_HandleTypeDef *i2c_handler);
+
+static HAL_StatusTypeDef I2Cx_ReadMultiple(I2C_HandleTypeDef *i2c_handler, uint8_t Addr, uint16_t Reg, uint16_t MemAddSize, uint8_t *Buffer, uint16_t Length);
+static HAL_StatusTypeDef I2Cx_WriteMultiple(I2C_HandleTypeDef *i2c_handler, uint8_t Addr, uint16_t Reg, uint16_t MemAddSize, uint8_t *Buffer, uint16_t Length);
+static HAL_StatusTypeDef I2Cx_IsDeviceReady(I2C_HandleTypeDef *i2c_handler, uint16_t DevAddress, uint32_t Trials);
+static void I2Cx_Error(I2C_HandleTypeDef *i2c_handler, uint8_t Addr);
+
+/* AUDIO IO functions */
+void AUDIO_IO_Init(void);
+void AUDIO_IO_DeInit(void);
+void AUDIO_IO_Write(uint8_t Addr, uint16_t Reg, uint16_t Value);
+uint16_t AUDIO_IO_Read(uint8_t Addr, uint16_t Reg);
+void AUDIO_IO_Delay(uint32_t Delay);
+
+/* TOUCHSCREEN IO functions */
+void TS_IO_Init(void);
+void TS_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
+uint8_t TS_IO_Read(uint8_t Addr, uint8_t Reg);
+void TS_IO_Delay(uint32_t Delay);
+
+/* CAMERA IO functions */
+void CAMERA_IO_Init(void);
+void CAMERA_Delay(uint32_t Delay);
+void CAMERA_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
+uint8_t CAMERA_IO_Read(uint8_t Addr, uint8_t Reg);
+
+/* I2C EEPROM IO function */
+void EEPROM_IO_Init(void);
+HAL_StatusTypeDef EEPROM_IO_WriteData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef EEPROM_IO_ReadData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef EEPROM_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials);
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Exported_Functions STM32746G_DISCOVERY_LOW_LEVELSTM32746G_DISCOVERY_LOW_LEVEL Exported Functions
+ * @{
+ */
+
+ /**
+ * @brief This method returns the STM32746G DISCOVERY BSP Driver revision
+ * @retval version: 0xXYZR (8bits for each decimal, R for RC)
+ */
+uint32_t BSP_GetVersion(void)
+{
+ return __STM32746G_DISCO_BSP_VERSION;
+}
+
+/**
+ * @brief Configures LED on GPIO.
+ * @param Led: LED to be configured.
+ * This parameter can be one of the following values:
+ * @arg LED1
+ * @retval None
+ */
+void BSP_LED_Init(Led_TypeDef Led)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+ GPIO_TypeDef* gpio_led;
+
+ if (Led == DISCO_LED1)
+ {
+ gpio_led = LED1_GPIO_PORT;
+ /* Enable the GPIO_LED clock */
+ LED1_GPIO_CLK_ENABLE();
+
+ /* Configure the GPIO_LED pin */
+ gpio_init_structure.Pin = GPIO_PIN[Led];
+ gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+
+ HAL_GPIO_Init(gpio_led, &gpio_init_structure);
+
+ /* By default, turn off LED */
+ HAL_GPIO_WritePin(gpio_led, GPIO_PIN[Led], GPIO_PIN_RESET);
+ }
+}
+
+/**
+ * @brief DeInit LEDs.
+ * @param Led: LED to be configured.
+ * This parameter can be one of the following values:
+ * @arg LED1
+ * @note Led DeInit does not disable the GPIO clock
+ * @retval None
+ */
+void BSP_LED_DeInit(Led_TypeDef Led)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+ GPIO_TypeDef* gpio_led;
+
+ if (Led == DISCO_LED1)
+ {
+ gpio_led = LED1_GPIO_PORT;
+ /* Turn off LED */
+ HAL_GPIO_WritePin(gpio_led, GPIO_PIN[Led], GPIO_PIN_RESET);
+ /* Configure the GPIO_LED pin */
+ gpio_init_structure.Pin = GPIO_PIN[Led];
+ HAL_GPIO_DeInit(gpio_led, gpio_init_structure.Pin);
+ }
+}
+
+/**
+ * @brief Turns selected LED On.
+ * @param Led: LED to be set on
+ * This parameter can be one of the following values:
+ * @arg LED1
+ * @retval None
+ */
+void BSP_LED_On(Led_TypeDef Led)
+{
+ GPIO_TypeDef* gpio_led;
+
+ if (Led == DISCO_LED1) /* Switch On LED connected to GPIO */
+ {
+ gpio_led = LED1_GPIO_PORT;
+ HAL_GPIO_WritePin(gpio_led, GPIO_PIN[Led], GPIO_PIN_SET);
+ }
+}
+
+/**
+ * @brief Turns selected LED Off.
+ * @param Led: LED to be set off
+ * This parameter can be one of the following values:
+ * @arg LED1
+ * @retval None
+ */
+void BSP_LED_Off(Led_TypeDef Led)
+{
+ GPIO_TypeDef* gpio_led;
+
+ if (Led == DISCO_LED1) /* Switch Off LED connected to GPIO */
+ {
+ gpio_led = LED1_GPIO_PORT;
+ HAL_GPIO_WritePin(gpio_led, GPIO_PIN[Led], GPIO_PIN_RESET);
+ }
+}
+
+/**
+ * @brief Toggles the selected LED.
+ * @param Led: LED to be toggled
+ * This parameter can be one of the following values:
+ * @arg LED1
+ * @retval None
+ */
+void BSP_LED_Toggle(Led_TypeDef Led)
+{
+ GPIO_TypeDef* gpio_led;
+
+ if (Led == DISCO_LED1) /* Toggle LED connected to GPIO */
+ {
+ gpio_led = LED1_GPIO_PORT;
+ HAL_GPIO_TogglePin(gpio_led, GPIO_PIN[Led]);
+ }
+}
+
+/**
+ * @brief Configures button GPIO and EXTI Line.
+ * @param Button: Button to be configured
+ * This parameter can be one of the following values:
+ * @arg BUTTON_WAKEUP: Wakeup Push Button
+ * @arg BUTTON_TAMPER: Tamper Push Button
+ * @arg BUTTON_KEY: Key Push Button
+ * @param ButtonMode: Button mode
+ * This parameter can be one of the following values:
+ * @arg BUTTON_MODE_GPIO: Button will be used as simple IO
+ * @arg BUTTON_MODE_EXTI: Button will be connected to EXTI line
+ * with interrupt generation capability
+ * @note On STM32746G-Discovery board, the three buttons (Wakeup, Tamper and key buttons)
+ * are mapped on the same push button named "User"
+ * on the board serigraphy.
+ * @retval None
+ */
+void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* Enable the BUTTON clock */
+ BUTTONx_GPIO_CLK_ENABLE(Button);
+
+ if(ButtonMode == BUTTON_MODE_GPIO)
+ {
+ /* Configure Button pin as input */
+ gpio_init_structure.Pin = BUTTON_PIN[Button];
+ gpio_init_structure.Mode = GPIO_MODE_INPUT;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_FAST;
+ HAL_GPIO_Init(BUTTON_PORT[Button], &gpio_init_structure);
+ }
+
+ if(ButtonMode == BUTTON_MODE_EXTI)
+ {
+ /* Configure Button pin as input with External interrupt */
+ gpio_init_structure.Pin = BUTTON_PIN[Button];
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_FAST;
+
+ if(Button != BUTTON_WAKEUP)
+ {
+ gpio_init_structure.Mode = GPIO_MODE_IT_FALLING;
+ }
+ else
+ {
+ gpio_init_structure.Mode = GPIO_MODE_IT_RISING;
+ }
+
+ HAL_GPIO_Init(BUTTON_PORT[Button], &gpio_init_structure);
+
+ /* Enable and set Button EXTI Interrupt to the lowest priority */
+ HAL_NVIC_SetPriority((IRQn_Type)(BUTTON_IRQn[Button]), 0x0F, 0x00);
+ HAL_NVIC_EnableIRQ((IRQn_Type)(BUTTON_IRQn[Button]));
+ }
+}
+
+/**
+ * @brief Push Button DeInit.
+ * @param Button: Button to be configured
+ * This parameter can be one of the following values:
+ * @arg BUTTON_WAKEUP: Wakeup Push Button
+ * @arg BUTTON_TAMPER: Tamper Push Button
+ * @arg BUTTON_KEY: Key Push Button
+ * @note On STM32746G-Discovery board, the three buttons (Wakeup, Tamper and key buttons)
+ * are mapped on the same push button named "User"
+ * on the board serigraphy.
+ * @note PB DeInit does not disable the GPIO clock
+ * @retval None
+ */
+void BSP_PB_DeInit(Button_TypeDef Button)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ gpio_init_structure.Pin = BUTTON_PIN[Button];
+ HAL_NVIC_DisableIRQ((IRQn_Type)(BUTTON_IRQn[Button]));
+ HAL_GPIO_DeInit(BUTTON_PORT[Button], gpio_init_structure.Pin);
+}
+
+
+/**
+ * @brief Returns the selected button state.
+ * @param Button: Button to be checked
+ * This parameter can be one of the following values:
+ * @arg BUTTON_WAKEUP: Wakeup Push Button
+ * @arg BUTTON_TAMPER: Tamper Push Button
+ * @arg BUTTON_KEY: Key Push Button
+ * @note On STM32746G-Discovery board, the three buttons (Wakeup, Tamper and key buttons)
+ * are mapped on the same push button named "User"
+ * on the board serigraphy.
+ * @retval The Button GPIO pin value
+ */
+uint32_t BSP_PB_GetState(Button_TypeDef Button)
+{
+ return HAL_GPIO_ReadPin(BUTTON_PORT[Button], BUTTON_PIN[Button]);
+}
+
+/**
+ * @brief Configures COM port.
+ * @param COM: COM port to be configured.
+ * This parameter can be one of the following values:
+ * @arg COM1
+ * @arg COM2
+ * @param huart: Pointer to a UART_HandleTypeDef structure that contains the
+ * configuration information for the specified USART peripheral.
+ * @retval None
+ */
+void BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef *huart)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* Enable GPIO clock */
+ DISCOVERY_COMx_TX_GPIO_CLK_ENABLE(COM);
+ DISCOVERY_COMx_RX_GPIO_CLK_ENABLE(COM);
+
+ /* Enable USART clock */
+ DISCOVERY_COMx_CLK_ENABLE(COM);
+
+ /* Configure USART Tx as alternate function */
+ gpio_init_structure.Pin = COM_TX_PIN[COM];
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Speed = GPIO_SPEED_FAST;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Alternate = COM_TX_AF[COM];
+ HAL_GPIO_Init(COM_TX_PORT[COM], &gpio_init_structure);
+
+ /* Configure USART Rx as alternate function */
+ gpio_init_structure.Pin = COM_RX_PIN[COM];
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Alternate = COM_RX_AF[COM];
+ HAL_GPIO_Init(COM_RX_PORT[COM], &gpio_init_structure);
+
+ /* USART configuration */
+ huart->Instance = COM_USART[COM];
+ HAL_UART_Init(huart);
+}
+
+/**
+ * @brief DeInit COM port.
+ * @param COM: COM port to be configured.
+ * This parameter can be one of the following values:
+ * @arg COM1
+ * @arg COM2
+ * @param huart: Pointer to a UART_HandleTypeDef structure that contains the
+ * configuration information for the specified USART peripheral.
+ * @retval None
+ */
+void BSP_COM_DeInit(COM_TypeDef COM, UART_HandleTypeDef *huart)
+{
+ /* USART configuration */
+ huart->Instance = COM_USART[COM];
+ HAL_UART_DeInit(huart);
+
+ /* Enable USART clock */
+ DISCOVERY_COMx_CLK_DISABLE(COM);
+
+ /* DeInit GPIO pins can be done in the application
+ (by surcharging this __weak function) */
+
+ /* GPIO pins clock, DMA clock can be shut down in the application
+ by surcharging this __weak function */
+}
+
+/*******************************************************************************
+ BUS OPERATIONS
+*******************************************************************************/
+
+/******************************* I2C Routines *********************************/
+/**
+ * @brief Initializes I2C MSP.
+ * @param i2c_handler : I2C handler
+ * @retval None
+ */
+static void I2Cx_MspInit(I2C_HandleTypeDef *i2c_handler)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ if (i2c_handler == (I2C_HandleTypeDef*)(&hI2cAudioHandler))
+ {
+ /* AUDIO and LCD I2C MSP init */
+
+ /*** Configure the GPIOs ***/
+ /* Enable GPIO clock */
+ DISCOVERY_AUDIO_I2Cx_SCL_SDA_GPIO_CLK_ENABLE();
+
+ /* Configure I2C Tx as alternate function */
+ gpio_init_structure.Pin = DISCOVERY_AUDIO_I2Cx_SCL_PIN;
+ gpio_init_structure.Mode = GPIO_MODE_AF_OD;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_FAST;
+ gpio_init_structure.Alternate = DISCOVERY_AUDIO_I2Cx_SCL_SDA_AF;
+ HAL_GPIO_Init(DISCOVERY_AUDIO_I2Cx_SCL_SDA_GPIO_PORT, &gpio_init_structure);
+
+ /* Configure I2C Rx as alternate function */
+ gpio_init_structure.Pin = DISCOVERY_AUDIO_I2Cx_SDA_PIN;
+ HAL_GPIO_Init(DISCOVERY_AUDIO_I2Cx_SCL_SDA_GPIO_PORT, &gpio_init_structure);
+
+ /*** Configure the I2C peripheral ***/
+ /* Enable I2C clock */
+ DISCOVERY_AUDIO_I2Cx_CLK_ENABLE();
+
+ /* Force the I2C peripheral clock reset */
+ DISCOVERY_AUDIO_I2Cx_FORCE_RESET();
+
+ /* Release the I2C peripheral clock reset */
+ DISCOVERY_AUDIO_I2Cx_RELEASE_RESET();
+
+ /* Enable and set I2Cx Interrupt to a lower priority */
+ HAL_NVIC_SetPriority(DISCOVERY_AUDIO_I2Cx_EV_IRQn, 0x05, 0);
+ HAL_NVIC_EnableIRQ(DISCOVERY_AUDIO_I2Cx_EV_IRQn);
+
+ /* Enable and set I2Cx Interrupt to a lower priority */
+ HAL_NVIC_SetPriority(DISCOVERY_AUDIO_I2Cx_ER_IRQn, 0x05, 0);
+ HAL_NVIC_EnableIRQ(DISCOVERY_AUDIO_I2Cx_ER_IRQn);
+ }
+ else
+ {
+ /* External, camera and Arduino connector I2C MSP init */
+
+ /*** Configure the GPIOs ***/
+ /* Enable GPIO clock */
+ DISCOVERY_EXT_I2Cx_SCL_SDA_GPIO_CLK_ENABLE();
+
+ /* Configure I2C Tx as alternate function */
+ gpio_init_structure.Pin = DISCOVERY_EXT_I2Cx_SCL_PIN;
+ gpio_init_structure.Mode = GPIO_MODE_AF_OD;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_FAST;
+ gpio_init_structure.Alternate = DISCOVERY_EXT_I2Cx_SCL_SDA_AF;
+ HAL_GPIO_Init(DISCOVERY_EXT_I2Cx_SCL_SDA_GPIO_PORT, &gpio_init_structure);
+
+ /* Configure I2C Rx as alternate function */
+ gpio_init_structure.Pin = DISCOVERY_EXT_I2Cx_SDA_PIN;
+ HAL_GPIO_Init(DISCOVERY_EXT_I2Cx_SCL_SDA_GPIO_PORT, &gpio_init_structure);
+
+ /*** Configure the I2C peripheral ***/
+ /* Enable I2C clock */
+ DISCOVERY_EXT_I2Cx_CLK_ENABLE();
+
+ /* Force the I2C peripheral clock reset */
+ DISCOVERY_EXT_I2Cx_FORCE_RESET();
+
+ /* Release the I2C peripheral clock reset */
+ DISCOVERY_EXT_I2Cx_RELEASE_RESET();
+
+ /* Enable and set I2Cx Interrupt to a lower priority */
+ HAL_NVIC_SetPriority(DISCOVERY_EXT_I2Cx_EV_IRQn, 0x05, 0);
+ HAL_NVIC_EnableIRQ(DISCOVERY_EXT_I2Cx_EV_IRQn);
+
+ /* Enable and set I2Cx Interrupt to a lower priority */
+ HAL_NVIC_SetPriority(DISCOVERY_EXT_I2Cx_ER_IRQn, 0x05, 0);
+ HAL_NVIC_EnableIRQ(DISCOVERY_EXT_I2Cx_ER_IRQn);
+ }
+}
+
+/**
+ * @brief Initializes I2C HAL.
+ * @param i2c_handler : I2C handler
+ * @retval None
+ */
+static void I2Cx_Init(I2C_HandleTypeDef *i2c_handler)
+{
+ if(HAL_I2C_GetState(i2c_handler) == HAL_I2C_STATE_RESET)
+ {
+ if (i2c_handler == (I2C_HandleTypeDef*)(&hI2cAudioHandler))
+ {
+ /* Audio and LCD I2C configuration */
+ i2c_handler->Instance = DISCOVERY_AUDIO_I2Cx;
+ }
+ else
+ {
+ /* External, camera and Arduino connector I2C configuration */
+ i2c_handler->Instance = DISCOVERY_EXT_I2Cx;
+ }
+ i2c_handler->Init.Timing = DISCOVERY_I2Cx_TIMING;
+ i2c_handler->Init.OwnAddress1 = 0;
+ i2c_handler->Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
+ i2c_handler->Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
+ i2c_handler->Init.OwnAddress2 = 0;
+ i2c_handler->Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
+ i2c_handler->Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
+
+ /* Init the I2C */
+ I2Cx_MspInit(i2c_handler);
+ HAL_I2C_Init(i2c_handler);
+ }
+}
+
+/**
+ * @brief Reads multiple data.
+ * @param i2c_handler : I2C handler
+ * @param Addr: I2C address
+ * @param Reg: Reg address
+ * @param MemAddress: Memory address
+ * @param Buffer: Pointer to data buffer
+ * @param Length: Length of the data
+ * @retval Number of read data
+ */
+static HAL_StatusTypeDef I2Cx_ReadMultiple(I2C_HandleTypeDef *i2c_handler,
+ uint8_t Addr,
+ uint16_t Reg,
+ uint16_t MemAddress,
+ uint8_t *Buffer,
+ uint16_t Length)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ status = HAL_I2C_Mem_Read(i2c_handler, Addr, (uint16_t)Reg, MemAddress, Buffer, Length, 1000);
+
+ /* Check the communication status */
+ if(status != HAL_OK)
+ {
+ /* I2C error occurred */
+ I2Cx_Error(i2c_handler, Addr);
+ }
+ return status;
+}
+
+/**
+ * @brief Writes a value in a register of the device through BUS in using DMA mode.
+ * @param i2c_handler : I2C handler
+ * @param Addr: Device address on BUS Bus.
+ * @param Reg: The target register address to write
+ * @param MemAddress: Memory address
+ * @param Buffer: The target register value to be written
+ * @param Length: buffer size to be written
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2Cx_WriteMultiple(I2C_HandleTypeDef *i2c_handler,
+ uint8_t Addr,
+ uint16_t Reg,
+ uint16_t MemAddress,
+ uint8_t *Buffer,
+ uint16_t Length)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ status = HAL_I2C_Mem_Write(i2c_handler, Addr, (uint16_t)Reg, MemAddress, Buffer, Length, 1000);
+
+ /* Check the communication status */
+ if(status != HAL_OK)
+ {
+ /* Re-Initiaize the I2C Bus */
+ I2Cx_Error(i2c_handler, Addr);
+ }
+ return status;
+}
+
+/**
+ * @brief Checks if target device is ready for communication.
+ * @note This function is used with Memory devices
+ * @param i2c_handler : I2C handler
+ * @param DevAddress: Target device address
+ * @param Trials: Number of trials
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef I2Cx_IsDeviceReady(I2C_HandleTypeDef *i2c_handler, uint16_t DevAddress, uint32_t Trials)
+{
+ return (HAL_I2C_IsDeviceReady(i2c_handler, DevAddress, Trials, 1000));
+}
+
+/**
+ * @brief Manages error callback by re-initializing I2C.
+ * @param i2c_handler : I2C handler
+ * @param Addr: I2C Address
+ * @retval None
+ */
+static void I2Cx_Error(I2C_HandleTypeDef *i2c_handler, uint8_t Addr)
+{
+ /* De-initialize the I2C communication bus */
+ HAL_I2C_DeInit(i2c_handler);
+
+ /* Re-Initialize the I2C communication bus */
+ I2Cx_Init(i2c_handler);
+}
+
+/*******************************************************************************
+ LINK OPERATIONS
+*******************************************************************************/
+
+/********************************* LINK AUDIO *********************************/
+
+/**
+ * @brief Initializes Audio low level.
+ * @retval None
+ */
+void AUDIO_IO_Init(void)
+{
+ I2Cx_Init(&hI2cAudioHandler);
+}
+
+/**
+ * @brief Deinitializes Audio low level.
+ * @retval None
+ */
+void AUDIO_IO_DeInit(void)
+{
+}
+
+/**
+ * @brief Writes a single data.
+ * @param Addr: I2C address
+ * @param Reg: Reg address
+ * @param Value: Data to be written
+ * @retval None
+ */
+void AUDIO_IO_Write(uint8_t Addr, uint16_t Reg, uint16_t Value)
+{
+ uint16_t tmp = Value;
+
+ Value = ((uint16_t)(tmp >> 8) & 0x00FF);
+
+ Value |= ((uint16_t)(tmp << 8)& 0xFF00);
+
+ I2Cx_WriteMultiple(&hI2cAudioHandler, Addr, Reg, I2C_MEMADD_SIZE_16BIT,(uint8_t*)&Value, 2);
+}
+
+/**
+ * @brief Reads a single data.
+ * @param Addr: I2C address
+ * @param Reg: Reg address
+ * @retval Data to be read
+ */
+uint16_t AUDIO_IO_Read(uint8_t Addr, uint16_t Reg)
+{
+ uint16_t read_value = 0, tmp = 0;
+
+ I2Cx_ReadMultiple(&hI2cAudioHandler, Addr, Reg, I2C_MEMADD_SIZE_16BIT, (uint8_t*)&read_value, 2);
+
+ tmp = ((uint16_t)(read_value >> 8) & 0x00FF);
+
+ tmp |= ((uint16_t)(read_value << 8)& 0xFF00);
+
+ read_value = tmp;
+
+ return read_value;
+}
+
+/**
+ * @brief AUDIO Codec delay
+ * @param Delay: Delay in ms
+ * @retval None
+ */
+void AUDIO_IO_Delay(uint32_t Delay)
+{
+ //HAL_Delay(Delay);
+ wait_ms(Delay);
+}
+
+/********************************* LINK CAMERA ********************************/
+
+/**
+ * @brief Initializes Camera low level.
+ * @retval None
+ */
+void CAMERA_IO_Init(void)
+{
+ I2Cx_Init(&hI2cExtHandler);
+}
+
+/**
+ * @brief Camera writes single data.
+ * @param Addr: I2C address
+ * @param Reg: Register address
+ * @param Value: Data to be written
+ * @retval None
+ */
+void CAMERA_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value)
+{
+ I2Cx_WriteMultiple(&hI2cExtHandler, Addr, (uint16_t)Reg, I2C_MEMADD_SIZE_8BIT,(uint8_t*)&Value, 1);
+}
+
+/**
+ * @brief Camera reads single data.
+ * @param Addr: I2C address
+ * @param Reg: Register address
+ * @retval Read data
+ */
+uint8_t CAMERA_IO_Read(uint8_t Addr, uint8_t Reg)
+{
+ uint8_t read_value = 0;
+
+ I2Cx_ReadMultiple(&hI2cExtHandler, Addr, Reg, I2C_MEMADD_SIZE_8BIT, (uint8_t*)&read_value, 1);
+
+ return read_value;
+}
+
+/**
+ * @brief Camera delay
+ * @param Delay: Delay in ms
+ * @retval None
+ */
+void CAMERA_Delay(uint32_t Delay)
+{
+ //HAL_Delay(Delay);
+ wait_ms(Delay);
+}
+
+/******************************** LINK I2C EEPROM *****************************/
+
+/**
+ * @brief Initializes peripherals used by the I2C EEPROM driver.
+ * @retval None
+ */
+void EEPROM_IO_Init(void)
+{
+ I2Cx_Init(&hI2cExtHandler);
+}
+
+/**
+ * @brief Write data to I2C EEPROM driver in using DMA channel.
+ * @param DevAddress: Target device address
+ * @param MemAddress: Internal memory address
+ * @param pBuffer: Pointer to data buffer
+ * @param BufferSize: Amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef EEPROM_IO_WriteData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize)
+{
+ return (I2Cx_WriteMultiple(&hI2cExtHandler, DevAddress, MemAddress, I2C_MEMADD_SIZE_16BIT, pBuffer, BufferSize));
+}
+
+/**
+ * @brief Read data from I2C EEPROM driver in using DMA channel.
+ * @param DevAddress: Target device address
+ * @param MemAddress: Internal memory address
+ * @param pBuffer: Pointer to data buffer
+ * @param BufferSize: Amount of data to be read
+ * @retval HAL status
+ */
+HAL_StatusTypeDef EEPROM_IO_ReadData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize)
+{
+ return (I2Cx_ReadMultiple(&hI2cExtHandler, DevAddress, MemAddress, I2C_MEMADD_SIZE_16BIT, pBuffer, BufferSize));
+}
+
+/**
+ * @brief Checks if target device is ready for communication.
+ * @note This function is used with Memory devices
+ * @param DevAddress: Target device address
+ * @param Trials: Number of trials
+ * @retval HAL status
+ */
+HAL_StatusTypeDef EEPROM_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials)
+{
+ return (I2Cx_IsDeviceReady(&hI2cExtHandler, DevAddress, Trials));
+}
+
+/********************************* LINK TOUCHSCREEN *********************************/
+
+/**
+ * @brief Initializes Touchscreen low level.
+ * @retval None
+ */
+void TS_IO_Init(void)
+{
+ I2Cx_Init(&hI2cAudioHandler);
+}
+
+/**
+ * @brief Writes a single data.
+ * @param Addr: I2C address
+ * @param Reg: Reg address
+ * @param Value: Data to be written
+ * @retval None
+ */
+void TS_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value)
+{
+ I2Cx_WriteMultiple(&hI2cAudioHandler, Addr, (uint16_t)Reg, I2C_MEMADD_SIZE_8BIT,(uint8_t*)&Value, 1);
+}
+
+/**
+ * @brief Reads a single data.
+ * @param Addr: I2C address
+ * @param Reg: Reg address
+ * @retval Data to be read
+ */
+uint8_t TS_IO_Read(uint8_t Addr, uint8_t Reg)
+{
+ uint8_t read_value = 0;
+
+ I2Cx_ReadMultiple(&hI2cAudioHandler, Addr, Reg, I2C_MEMADD_SIZE_8BIT, (uint8_t*)&read_value, 1);
+
+ return read_value;
+}
+
+/**
+ * @brief TS delay
+ * @param Delay: Delay in ms
+ * @retval None
+ */
+void TS_IO_Delay(uint32_t Delay)
+{
+ //HAL_Delay(Delay);
+ wait_ms(Delay);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,343 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file contains definitions for STM32746G_DISCOVERY's LEDs,
+ * push-buttons and COM ports hardware resources.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32746G_DISCOVERY_H
+#define __STM32746G_DISCOVERY_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+#include "cmsis_nvic.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Exported_Types STM32746G_DISCOVERY_LOW_LEVEL Exported Types
+ * @{
+ */
+typedef enum
+{
+ DISCO_LED1 = 0,
+ LED_GREEN = DISCO_LED1,
+}Led_TypeDef;
+
+typedef enum
+{
+ BUTTON_WAKEUP = 0,
+ BUTTON_TAMPER = 1,
+ BUTTON_KEY = 2
+}Button_TypeDef;
+
+typedef enum
+{
+ BUTTON_MODE_GPIO = 0,
+ BUTTON_MODE_EXTI = 1
+}ButtonMode_TypeDef;
+
+typedef enum
+{
+ COM1 = 0,
+ COM2 = 1
+}COM_TypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Exported_Constants STM32746G_DISCOVERY_LOW_LEVEL Exported Constants
+ * @{
+ */
+
+/**
+ * @brief Define for STM32746G_DISCOVERY board
+ */
+#if !defined (USE_STM32746G_DISCO)
+ #define USE_STM32746G_DISCO
+#endif
+
+/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_LED
+ * @{
+ */
+
+#define LEDn ((uint8_t)1)
+
+#define LED1_GPIO_PORT GPIOI
+#define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE()
+#define LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE()
+#define LED1_PIN GPIO_PIN_1
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_BUTTON
+ * @{
+ */
+#define BUTTONn ((uint8_t)3)
+
+/**
+ * @brief Wakeup push-button
+ */
+#define WAKEUP_BUTTON_PIN GPIO_PIN_11
+#define WAKEUP_BUTTON_GPIO_PORT GPIOI
+#define WAKEUP_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE()
+#define WAKEUP_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE()
+#define WAKEUP_BUTTON_EXTI_IRQn EXTI15_10_IRQn
+
+/**
+ * @brief Tamper push-button
+ */
+#define TAMPER_BUTTON_PIN GPIO_PIN_11
+#define TAMPER_BUTTON_GPIO_PORT GPIOI
+#define TAMPER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE()
+#define TAMPER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE()
+#define TAMPER_BUTTON_EXTI_IRQn EXTI15_10_IRQn
+
+/**
+ * @brief Key push-button
+ */
+#define KEY_BUTTON_PIN GPIO_PIN_11
+#define KEY_BUTTON_GPIO_PORT GPIOI
+#define KEY_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE()
+#define KEY_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE()
+#define KEY_BUTTON_EXTI_IRQn EXTI15_10_IRQn
+
+#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == 0) WAKEUP_BUTTON_GPIO_CLK_ENABLE(); else\
+ if((__INDEX__) == 1) TAMPER_BUTTON_GPIO_CLK_ENABLE(); else\
+ KEY_BUTTON_GPIO_CLK_ENABLE(); } while(0)
+
+#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? WAKEUP_BUTTON_GPIO_CLK_DISABLE() :\
+ ((__INDEX__) == 1) ? TAMPER_BUTTON_GPIO_CLK_DISABLE() : KEY_BUTTON_GPIO_CLK_DISABLE())
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_SIGNAL
+ * @{
+ */
+#define SIGNALn ((uint8_t)1)
+
+/**
+ * @brief SD-detect signal
+ */
+#define SD_DETECT_PIN GPIO_PIN_13
+#define SD_DETECT_GPIO_PORT GPIOC
+#define SD_DETECT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
+#define SD_DETECT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
+#define SD_DETECT_EXTI_IRQn EXTI15_10_IRQn
+
+/**
+ * @brief Touch screen interrupt signal
+ */
+#define TS_INT_PIN GPIO_PIN_13
+#define TS_INT_GPIO_PORT GPIOI
+#define TS_INT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE()
+#define TS_INT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE()
+#define TS_INT_EXTI_IRQn EXTI15_10_IRQn
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_COM
+ * @{
+ */
+#define COMn ((uint8_t)1)
+
+/**
+ * @brief Definition for COM port1, connected to USART1
+ */
+#define DISCOVERY_COM1 USART1
+#define DISCOVERY_COM1_CLK_ENABLE() __HAL_RCC_USART1_CLK_ENABLE()
+#define DISCOVERY_COM1_CLK_DISABLE() __HAL_RCC_USART1_CLK_DISABLE()
+
+#define DISCOVERY_COM1_TX_PIN GPIO_PIN_9
+#define DISCOVERY_COM1_TX_GPIO_PORT GPIOA
+#define DISCOVERY_COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
+#define DISCOVERY_COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
+#define DISCOVERY_COM1_TX_AF GPIO_AF7_USART1
+
+#define DISCOVERY_COM1_RX_PIN GPIO_PIN_7
+#define DISCOVERY_COM1_RX_GPIO_PORT GPIOB
+#define DISCOVERY_COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
+#define DISCOVERY_COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
+#define DISCOVERY_COM1_RX_AF GPIO_AF7_USART1
+
+#define DISCOVERY_COM1_IRQn USART1_IRQn
+
+#define DISCOVERY_COMx_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) DISCOVERY_COM1_CLK_ENABLE(); } while(0)
+#define DISCOVERY_COMx_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? DISCOVERY_COM1_CLK_DISABLE() : 0)
+
+#define DISCOVERY_COMx_TX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) DISCOVERY_COM1_TX_GPIO_CLK_ENABLE(); } while(0)
+#define DISCOVERY_COMx_TX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? DISCOVERY_COM1_TX_GPIO_CLK_DISABLE() : 0)
+
+#define DISCOVERY_COMx_RX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) DISCOVERY_COM1_RX_GPIO_CLK_ENABLE(); } while(0)
+#define DISCOVERY_COMx_RX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? DISCOVERY_COM1_RX_GPIO_CLK_DISABLE() : 0)
+
+/* Exported constant IO ------------------------------------------------------*/
+
+#define LCD_I2C_ADDRESS ((uint16_t)0x70)
+#define CAMERA_I2C_ADDRESS ((uint16_t)0x60)
+#define AUDIO_I2C_ADDRESS ((uint16_t)0x34)
+#define EEPROM_I2C_ADDRESS_A01 ((uint16_t)0xA0)
+#define EEPROM_I2C_ADDRESS_A02 ((uint16_t)0xA6)
+#define TS_I2C_ADDRESS ((uint16_t)0x70)
+
+/* I2C clock speed configuration (in Hz)
+ WARNING:
+ Make sure that this define is not already declared in other files (ie.
+ stm32746g_discovery.h file). It can be used in parallel by other modules. */
+#ifndef I2C_SPEED
+ #define I2C_SPEED ((uint32_t)100000)
+#endif /* I2C_SPEED */
+
+/* User can use this section to tailor I2Cx/I2Cx instance used and associated
+ resources */
+/* Definition for AUDIO and LCD I2Cx resources */
+#define DISCOVERY_AUDIO_I2Cx I2C3
+#define DISCOVERY_AUDIO_I2Cx_CLK_ENABLE() __HAL_RCC_I2C3_CLK_ENABLE()
+#define DISCOVERY_AUDIO_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE()
+#define DISCOVERY_AUDIO_I2Cx_SCL_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOH_CLK_ENABLE()
+
+#define DISCOVERY_AUDIO_I2Cx_FORCE_RESET() __HAL_RCC_I2C3_FORCE_RESET()
+#define DISCOVERY_AUDIO_I2Cx_RELEASE_RESET() __HAL_RCC_I2C3_RELEASE_RESET()
+
+/* Definition for I2Cx Pins */
+#define DISCOVERY_AUDIO_I2Cx_SCL_PIN GPIO_PIN_7
+#define DISCOVERY_AUDIO_I2Cx_SCL_SDA_GPIO_PORT GPIOH
+#define DISCOVERY_AUDIO_I2Cx_SCL_SDA_AF GPIO_AF4_I2C3
+#define DISCOVERY_AUDIO_I2Cx_SDA_PIN GPIO_PIN_8
+
+/* I2C interrupt requests */
+#define DISCOVERY_AUDIO_I2Cx_EV_IRQn I2C3_EV_IRQn
+#define DISCOVERY_AUDIO_I2Cx_ER_IRQn I2C3_ER_IRQn
+
+/* Definition for external, camera and Arduino connector I2Cx resources */
+#define DISCOVERY_EXT_I2Cx I2C1
+#define DISCOVERY_EXT_I2Cx_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE()
+#define DISCOVERY_EXT_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE()
+#define DISCOVERY_EXT_I2Cx_SCL_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
+
+#define DISCOVERY_EXT_I2Cx_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET()
+#define DISCOVERY_EXT_I2Cx_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET()
+
+/* Definition for I2Cx Pins */
+#define DISCOVERY_EXT_I2Cx_SCL_PIN GPIO_PIN_8
+#define DISCOVERY_EXT_I2Cx_SCL_SDA_GPIO_PORT GPIOB
+#define DISCOVERY_EXT_I2Cx_SCL_SDA_AF GPIO_AF4_I2C1
+#define DISCOVERY_EXT_I2Cx_SDA_PIN GPIO_PIN_9
+
+/* I2C interrupt requests */
+#define DISCOVERY_EXT_I2Cx_EV_IRQn I2C1_EV_IRQn
+#define DISCOVERY_EXT_I2Cx_ER_IRQn I2C1_ER_IRQn
+
+/* I2C TIMING Register define when I2C clock source is SYSCLK */
+/* I2C TIMING is calculated from APB1 source clock = 50 MHz */
+/* Due to the big MOFSET capacity for adapting the camera level the rising time is very large (>1us) */
+/* 0x40912732 takes in account the big rising and aims a clock of 100khz */
+/* this value might be adapted when next Rev Birdie board is available */
+#ifndef DISCOVERY_I2Cx_TIMING
+#define DISCOVERY_I2Cx_TIMING ((uint32_t)0x40912732)
+#endif /* DISCOVERY_I2Cx_TIMING */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Exported_Macros STM32746G_DISCOVERY_LOW_LEVEL Exported Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_Exported_Functions
+ * @{
+ */
+uint32_t BSP_GetVersion(void);
+void BSP_LED_Init(Led_TypeDef Led);
+void BSP_LED_DeInit(Led_TypeDef Led);
+void BSP_LED_On(Led_TypeDef Led);
+void BSP_LED_Off(Led_TypeDef Led);
+void BSP_LED_Toggle(Led_TypeDef Led);
+void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
+void BSP_PB_DeInit(Button_TypeDef Button);
+uint32_t BSP_PB_GetState(Button_TypeDef Button);
+void BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef *husart);
+void BSP_COM_DeInit(COM_TypeDef COM, UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32746G_DISCOVERY_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_audio.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,1424 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_audio.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file provides the Audio driver for the STM32746G-Discovery board.
+ @verbatim
+ How To use this driver:
+ -----------------------
+ + This driver supports STM32F7xx devices on STM32746G-Discovery (MB1191) board.
+ + Call the function BSP_AUDIO_OUT_Init(
+ OutputDevice: physical output mode (OUTPUT_DEVICE_SPEAKER,
+ OUTPUT_DEVICE_HEADPHONE or OUTPUT_DEVICE_BOTH)
+ Volume : Initial volume to be set (0 is min (mute), 100 is max (100%)
+ AudioFreq : Audio frequency in Hz (8000, 16000, 22500, 32000...)
+ this parameter is relative to the audio file/stream type.
+ )
+ This function configures all the hardware required for the audio application (codec, I2C, SAI,
+ GPIOs, DMA and interrupt if needed). This function returns AUDIO_OK if configuration is OK.
+ If the returned value is different from AUDIO_OK or the function is stuck then the communication with
+ the codec or the MFX has failed (try to un-plug the power or reset device in this case).
+ - OUTPUT_DEVICE_SPEAKER : only speaker will be set as output for the audio stream.
+ - OUTPUT_DEVICE_HEADPHONE: only headphones will be set as output for the audio stream.
+ - OUTPUT_DEVICE_BOTH : both Speaker and Headphone are used as outputs for the audio stream
+ at the same time.
+ Note. On STM32746G-Discovery SAI_DMA is configured in CIRCULAR mode. Due to this the application
+ does NOT need to call BSP_AUDIO_OUT_ChangeBuffer() to assure streaming.
+ + Call the function BSP_DISCOVERY_AUDIO_OUT_Play(
+ pBuffer: pointer to the audio data file address
+ Size : size of the buffer to be sent in Bytes
+ )
+ to start playing (for the first time) from the audio file/stream.
+ + Call the function BSP_AUDIO_OUT_Pause() to pause playing
+ + Call the function BSP_AUDIO_OUT_Resume() to resume playing.
+ Note. After calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() should be called
+ for resume (it is not allowed to call BSP_AUDIO_OUT_Play() in this case).
+ Note. This function should be called only when the audio file is played or paused (not stopped).
+ + For each mode, you may need to implement the relative callback functions into your code.
+ The Callback functions are named AUDIO_OUT_XXX_CallBack() and only their prototypes are declared in
+ the stm32746g_discovery_audio.h file. (refer to the example for more details on the callbacks implementations)
+ + To Stop playing, to modify the volume level, the frequency, the audio frame slot,
+ the device output mode the mute or the stop, use the functions: BSP_AUDIO_OUT_SetVolume(),
+ AUDIO_OUT_SetFrequency(), BSP_AUDIO_OUT_SetAudioFrameSlot(), BSP_AUDIO_OUT_SetOutputMode(),
+ BSP_AUDIO_OUT_SetMute() and BSP_AUDIO_OUT_Stop().
+ + The driver API and the callback functions are at the end of the stm32746g_discovery_audio.h file.
+
+ Driver architecture:
+ --------------------
+ + This driver provides the High Audio Layer: consists of the function API exported in the stm32746g_discovery_audio.h file
+ (BSP_AUDIO_OUT_Init(), BSP_AUDIO_OUT_Play() ...)
+ + This driver provide also the Media Access Layer (MAL): which consists of functions allowing to access the media containing/
+ providing the audio file/stream. These functions are also included as local functions into
+ the stm32746g_discovery_audio_codec.c file (SAIx_Out_Init() and SAIx_Out_DeInit(), SAIx_In_Init() and SAIx_In_DeInit())
+
+ Known Limitations:
+ ------------------
+ 1- If the TDM Format used to play in parallel 2 audio Stream (the first Stream is configured in codec SLOT0 and second
+ Stream in SLOT1) the Pause/Resume, volume and mute feature will control the both streams.
+ 2- Parsing of audio file is not implemented (in order to determine audio file properties: Mono/Stereo, Data size,
+ File size, Audio Frequency, Audio Data header size ...). The configuration is fixed for the given audio file.
+ 3- Supports only Stereo audio streaming.
+ 4- Supports only 16-bits audio data size.
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32746g_discovery_audio.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO STM32746G_DISCOVERY AUDIO
+ * @brief This file includes the low layer driver for wm8994 Audio Codec
+ * available on STM32746G-Discovery board(MB1191).
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_Private_Types STM32746G_DISCOVERY AUDIO Private Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_Private_Defines STM32746G_DISCOVERY AUDIO Private Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_Private_Macros STM32746G_DISCOVERY AUDIO Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_Private_Variables STM32746G_DISCOVERY AUDIO Private Variables
+ * @{
+ */
+AUDIO_DrvTypeDef *audio_drv;
+SAI_HandleTypeDef haudio_out_sai={0};
+SAI_HandleTypeDef haudio_in_sai={0};
+TIM_HandleTypeDef haudio_tim;
+
+uint16_t __IO AudioInVolume = DEFAULT_AUDIO_IN_VOLUME;
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_Private_Function_Prototypes STM32746G_DISCOVERY AUDIO Private Function Prototypes
+ * @{
+ */
+static void AUDIO_IN_INT_IRQHandler(void);
+static void AUDIO_IN_SAIx_DMAx_IRQHandler(void);
+static void AUDIO_OUT_SAIx_DMAx_IRQHandler(void);
+static void SAIx_Out_Init(uint32_t AudioFreq);
+static void SAIx_Out_DeInit(void);
+static void SAIx_In_Init(uint32_t SaiOutMode, uint32_t SlotActive, uint32_t AudioFreq);
+static void SAIx_In_DeInit(void);
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_OUT_Exported_Functions STM32746G_DISCOVERY AUDIO Out Exported Functions
+ * @{
+ */
+
+/**
+ * @brief Configures the audio peripherals.
+ * @param OutputDevice: OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE,
+ * or OUTPUT_DEVICE_BOTH.
+ * @param Volume: Initial volume level (from 0 (Mute) to 100 (Max))
+ * @param AudioFreq: Audio frequency used to play the audio stream.
+ * @note The I2S PLL input clock must be done in the user application.
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_OUT_Init(uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq)
+{
+ uint8_t ret = AUDIO_ERROR;
+ uint32_t deviceid = 0x00;
+
+ /* Disable SAI */
+ SAIx_Out_DeInit();
+
+ /* PLL clock is set depending on the AudioFreq (44.1khz vs 48khz groups) */
+ BSP_AUDIO_OUT_ClockConfig(&haudio_out_sai, AudioFreq, NULL);
+
+ /* SAI data transfer preparation:
+ Prepare the Media to be used for the audio transfer from memory to SAI peripheral */
+ haudio_out_sai.Instance = AUDIO_OUT_SAIx;
+ if(HAL_SAI_GetState(&haudio_out_sai) == HAL_SAI_STATE_RESET)
+ {
+ /* Init the SAI MSP: this __weak function can be redefined by the application*/
+ BSP_AUDIO_OUT_MspInit(&haudio_out_sai, NULL);
+ }
+ SAIx_Out_Init(AudioFreq);
+
+ /* wm8994 codec initialization */
+ deviceid = wm8994_drv.ReadID(AUDIO_I2C_ADDRESS);
+
+ if((deviceid) == WM8994_ID)
+ {
+ /* Reset the Codec Registers */
+ wm8994_drv.Reset(AUDIO_I2C_ADDRESS);
+ /* Initialize the audio driver structure */
+ audio_drv = &wm8994_drv;
+ ret = AUDIO_OK;
+ }
+ else
+ {
+ ret = AUDIO_ERROR;
+ }
+
+ if(ret == AUDIO_OK)
+ {
+ /* Initialize the codec internal registers */
+ audio_drv->Init(AUDIO_I2C_ADDRESS, OutputDevice, Volume, AudioFreq);
+ }
+
+ return ret;
+}
+
+/**
+ * @brief Starts playing audio stream from a data buffer for a determined size.
+ * @param pBuffer: Pointer to the buffer
+ * @param Size: Number of audio data in BYTES unit.
+ * In memory, first element is for left channel, second element is for right channel
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_OUT_Play(uint16_t* pBuffer, uint32_t Size)
+{
+ /* Call the audio Codec Play function */
+ if(audio_drv->Play(AUDIO_I2C_ADDRESS, pBuffer, Size) != 0)
+ {
+ return AUDIO_ERROR;
+ }
+ else
+ {
+ /* Update the Media layer and enable it for play */
+ HAL_SAI_Transmit_DMA(&haudio_out_sai, (uint8_t*) pBuffer, DMA_MAX(Size / AUDIODATA_SIZE));
+
+ return AUDIO_OK;
+ }
+}
+
+/**
+ * @brief Sends n-Bytes on the SAI interface.
+ * @param pData: pointer on data address
+ * @param Size: number of data to be written
+ * @retval None
+ */
+void BSP_AUDIO_OUT_ChangeBuffer(uint16_t *pData, uint16_t Size)
+{
+ HAL_SAI_Transmit_DMA(&haudio_out_sai, (uint8_t*) pData, Size);
+}
+
+/**
+ * @brief This function Pauses the audio file stream. In case
+ * of using DMA, the DMA Pause feature is used.
+ * @note When calling BSP_AUDIO_OUT_Pause() function for pause, only
+ * BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play()
+ * function for resume could lead to unexpected behaviour).
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_OUT_Pause(void)
+{
+ /* Call the Audio Codec Pause/Resume function */
+ if(audio_drv->Pause(AUDIO_I2C_ADDRESS) != 0)
+ {
+ return AUDIO_ERROR;
+ }
+ else
+ {
+ /* Call the Media layer pause function */
+ HAL_SAI_DMAPause(&haudio_out_sai);
+
+ /* Return AUDIO_OK when all operations are correctly done */
+ return AUDIO_OK;
+ }
+}
+
+/**
+ * @brief This function Resumes the audio file stream.
+ * @note When calling BSP_AUDIO_OUT_Pause() function for pause, only
+ * BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play()
+ * function for resume could lead to unexpected behaviour).
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_OUT_Resume(void)
+{
+ /* Call the Audio Codec Pause/Resume function */
+ if(audio_drv->Resume(AUDIO_I2C_ADDRESS) != 0)
+ {
+ return AUDIO_ERROR;
+ }
+ else
+ {
+ /* Call the Media layer pause/resume function */
+ HAL_SAI_DMAResume(&haudio_out_sai);
+
+ /* Return AUDIO_OK when all operations are correctly done */
+ return AUDIO_OK;
+ }
+}
+
+/**
+ * @brief Stops audio playing and Power down the Audio Codec.
+ * @param Option: could be one of the following parameters
+ * - CODEC_PDWN_SW: for software power off (by writing registers).
+ * Then no need to reconfigure the Codec after power on.
+ * - CODEC_PDWN_HW: completely shut down the codec (physically).
+ * Then need to reconfigure the Codec after power on.
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_OUT_Stop(uint32_t Option)
+{
+ /* Call the Media layer stop function */
+ HAL_SAI_DMAStop(&haudio_out_sai);
+
+ /* Call Audio Codec Stop function */
+ if(audio_drv->Stop(AUDIO_I2C_ADDRESS, Option) != 0)
+ {
+ return AUDIO_ERROR;
+ }
+ else
+ {
+ if(Option == CODEC_PDWN_HW)
+ {
+ /* Wait at least 100us */
+ HAL_Delay(1);
+ }
+ /* Return AUDIO_OK when all operations are correctly done */
+ return AUDIO_OK;
+ }
+}
+
+/**
+ * @brief Controls the current audio volume level.
+ * @param Volume: Volume level to be set in percentage from 0% to 100% (0 for
+ * Mute and 100 for Max volume level).
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_OUT_SetVolume(uint8_t Volume)
+{
+ /* Call the codec volume control function with converted volume value */
+ if(audio_drv->SetVolume(AUDIO_I2C_ADDRESS, Volume) != 0)
+ {
+ return AUDIO_ERROR;
+ }
+ else
+ {
+ /* Return AUDIO_OK when all operations are correctly done */
+ return AUDIO_OK;
+ }
+}
+
+/**
+ * @brief Enables or disables the MUTE mode by software
+ * @param Cmd: Could be AUDIO_MUTE_ON to mute sound or AUDIO_MUTE_OFF to
+ * unmute the codec and restore previous volume level.
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_OUT_SetMute(uint32_t Cmd)
+{
+ /* Call the Codec Mute function */
+ if(audio_drv->SetMute(AUDIO_I2C_ADDRESS, Cmd) != 0)
+ {
+ return AUDIO_ERROR;
+ }
+ else
+ {
+ /* Return AUDIO_OK when all operations are correctly done */
+ return AUDIO_OK;
+ }
+}
+
+/**
+ * @brief Switch dynamically (while audio file is played) the output target
+ * (speaker or headphone).
+ * @param Output: The audio output target: OUTPUT_DEVICE_SPEAKER,
+ * OUTPUT_DEVICE_HEADPHONE or OUTPUT_DEVICE_BOTH
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_OUT_SetOutputMode(uint8_t Output)
+{
+ /* Call the Codec output device function */
+ if(audio_drv->SetOutputMode(AUDIO_I2C_ADDRESS, Output) != 0)
+ {
+ return AUDIO_ERROR;
+ }
+ else
+ {
+ /* Return AUDIO_OK when all operations are correctly done */
+ return AUDIO_OK;
+ }
+}
+
+/**
+ * @brief Updates the audio frequency.
+ * @param AudioFreq: Audio frequency used to play the audio stream.
+ * @note This API should be called after the BSP_AUDIO_OUT_Init() to adjust the
+ * audio frequency.
+ * @retval None
+ */
+void BSP_AUDIO_OUT_SetFrequency(uint32_t AudioFreq)
+{
+ /* PLL clock is set depending by the AudioFreq (44.1khz vs 48khz groups) */
+ BSP_AUDIO_OUT_ClockConfig(&haudio_out_sai, AudioFreq, NULL);
+
+ /* Disable SAI peripheral to allow access to SAI internal registers */
+ __HAL_SAI_DISABLE(&haudio_out_sai);
+
+ /* Update the SAI audio frequency configuration */
+ haudio_out_sai.Init.AudioFrequency = AudioFreq;
+ HAL_SAI_Init(&haudio_out_sai);
+
+ /* Enable SAI peripheral to generate MCLK */
+ __HAL_SAI_ENABLE(&haudio_out_sai);
+}
+
+/**
+ * @brief Updates the Audio frame slot configuration.
+ * @param AudioFrameSlot: specifies the audio Frame slot
+ * This parameter can be one of the following values
+ * @arg CODEC_AUDIOFRAME_SLOT_0123
+ * @arg CODEC_AUDIOFRAME_SLOT_02
+ * @arg CODEC_AUDIOFRAME_SLOT_13
+ * @note This API should be called after the BSP_AUDIO_OUT_Init() to adjust the
+ * audio frame slot.
+ * @retval None
+ */
+void BSP_AUDIO_OUT_SetAudioFrameSlot(uint32_t AudioFrameSlot)
+{
+ /* Disable SAI peripheral to allow access to SAI internal registers */
+ __HAL_SAI_DISABLE(&haudio_out_sai);
+
+ /* Update the SAI audio frame slot configuration */
+ haudio_out_sai.SlotInit.SlotActive = AudioFrameSlot;
+ HAL_SAI_Init(&haudio_out_sai);
+
+ /* Enable SAI peripheral to generate MCLK */
+ __HAL_SAI_ENABLE(&haudio_out_sai);
+}
+
+/**
+ * @brief Deinit the audio peripherals.
+ * @retval None
+ */
+void BSP_AUDIO_OUT_DeInit(void)
+{
+ SAIx_Out_DeInit();
+ /* DeInit the SAI MSP : this __weak function can be rewritten by the application */
+ BSP_AUDIO_OUT_MspDeInit(&haudio_out_sai, NULL);
+}
+
+/**
+ * @brief Tx Transfer completed callbacks.
+ * @param hsai: SAI handle
+ * @retval None
+ */
+void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai)
+{
+ /* Manage the remaining file size and new address offset: This function
+ should be coded by user (its prototype is already declared in stm32746g_discovery_audio.h) */
+ BSP_AUDIO_OUT_TransferComplete_CallBack();
+}
+
+/**
+ * @brief Tx Half Transfer completed callbacks.
+ * @param hsai: SAI handle
+ * @retval None
+ */
+void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai)
+{
+ /* Manage the remaining file size and new address offset: This function
+ should be coded by user (its prototype is already declared in stm32746g_discovery_audio.h) */
+ BSP_AUDIO_OUT_HalfTransfer_CallBack();
+}
+
+/**
+ * @brief SAI error callbacks.
+ * @param hsai: SAI handle
+ * @retval None
+ */
+void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai)
+{
+ HAL_SAI_StateTypeDef audio_out_state;
+ HAL_SAI_StateTypeDef audio_in_state;
+
+ audio_out_state = HAL_SAI_GetState(&haudio_out_sai);
+ audio_in_state = HAL_SAI_GetState(&haudio_in_sai);
+
+ /* Determines if it is an audio out or audio in error */
+ if ((audio_out_state == HAL_SAI_STATE_BUSY) || (audio_out_state == HAL_SAI_STATE_BUSY_TX)
+ || (audio_out_state == HAL_SAI_STATE_TIMEOUT) || (audio_out_state == HAL_SAI_STATE_ERROR))
+ {
+ BSP_AUDIO_OUT_Error_CallBack();
+ }
+
+ if ((audio_in_state == HAL_SAI_STATE_BUSY) || (audio_in_state == HAL_SAI_STATE_BUSY_RX)
+ || (audio_in_state == HAL_SAI_STATE_TIMEOUT) || (audio_in_state == HAL_SAI_STATE_ERROR))
+ {
+ BSP_AUDIO_IN_Error_CallBack();
+ }
+}
+
+/**
+ * @brief Manages the DMA full Transfer complete event.
+ * @retval None
+ */
+__weak void BSP_AUDIO_OUT_TransferComplete_CallBack(void)
+{
+}
+
+/**
+ * @brief Manages the DMA Half Transfer complete event.
+ * @retval None
+ */
+__weak void BSP_AUDIO_OUT_HalfTransfer_CallBack(void)
+{
+}
+
+/**
+ * @brief Manages the DMA FIFO error event.
+ * @retval None
+ */
+__weak void BSP_AUDIO_OUT_Error_CallBack(void)
+{
+}
+
+/**
+ * @brief Initializes BSP_AUDIO_OUT MSP.
+ * @param hsai: SAI handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_AUDIO_OUT_MspInit(SAI_HandleTypeDef *hsai, void *Params)
+{
+ static DMA_HandleTypeDef hdma_sai_tx;
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* Enable SAI clock */
+ AUDIO_OUT_SAIx_CLK_ENABLE();
+
+ /* Enable GPIO clock */
+ AUDIO_OUT_SAIx_MCLK_ENABLE();
+ AUDIO_OUT_SAIx_SCK_SD_ENABLE();
+ AUDIO_OUT_SAIx_FS_ENABLE();
+ /* CODEC_SAI pins configuration: FS, SCK, MCK and SD pins ------------------*/
+ gpio_init_structure.Pin = AUDIO_OUT_SAIx_FS_PIN;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = AUDIO_OUT_SAIx_FS_SD_MCLK_AF;
+ HAL_GPIO_Init(AUDIO_OUT_SAIx_FS_GPIO_PORT, &gpio_init_structure);
+
+ gpio_init_structure.Pin = AUDIO_OUT_SAIx_SCK_PIN;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = AUDIO_OUT_SAIx_SCK_AF;
+ HAL_GPIO_Init(AUDIO_OUT_SAIx_SCK_SD_GPIO_PORT, &gpio_init_structure);
+
+ gpio_init_structure.Pin = AUDIO_OUT_SAIx_SD_PIN;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = AUDIO_OUT_SAIx_FS_SD_MCLK_AF;
+ HAL_GPIO_Init(AUDIO_OUT_SAIx_SCK_SD_GPIO_PORT, &gpio_init_structure);
+
+ gpio_init_structure.Pin = AUDIO_OUT_SAIx_MCLK_PIN;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = AUDIO_OUT_SAIx_FS_SD_MCLK_AF;
+ HAL_GPIO_Init(AUDIO_OUT_SAIx_MCLK_GPIO_PORT, &gpio_init_structure);
+
+ /* Enable the DMA clock */
+ AUDIO_OUT_SAIx_DMAx_CLK_ENABLE();
+
+ if(hsai->Instance == AUDIO_OUT_SAIx)
+ {
+ /* Configure the hdma_saiTx handle parameters */
+ hdma_sai_tx.Init.Channel = AUDIO_OUT_SAIx_DMAx_CHANNEL;
+ hdma_sai_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
+ hdma_sai_tx.Init.PeriphInc = DMA_PINC_DISABLE;
+ hdma_sai_tx.Init.MemInc = DMA_MINC_ENABLE;
+ hdma_sai_tx.Init.PeriphDataAlignment = AUDIO_OUT_SAIx_DMAx_PERIPH_DATA_SIZE;
+ hdma_sai_tx.Init.MemDataAlignment = AUDIO_OUT_SAIx_DMAx_MEM_DATA_SIZE;
+ hdma_sai_tx.Init.Mode = DMA_CIRCULAR;
+ hdma_sai_tx.Init.Priority = DMA_PRIORITY_HIGH;
+ hdma_sai_tx.Init.FIFOMode = DMA_FIFOMODE_ENABLE;
+ hdma_sai_tx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
+ hdma_sai_tx.Init.MemBurst = DMA_MBURST_SINGLE;
+ hdma_sai_tx.Init.PeriphBurst = DMA_PBURST_SINGLE;
+
+ hdma_sai_tx.Instance = AUDIO_OUT_SAIx_DMAx_STREAM;
+
+ /* Associate the DMA handle */
+ __HAL_LINKDMA(hsai, hdmatx, hdma_sai_tx);
+
+ /* Deinitialize the Stream for new transfer */
+ HAL_DMA_DeInit(&hdma_sai_tx);
+
+ /* Configure the DMA Stream */
+ HAL_DMA_Init(&hdma_sai_tx);
+ }
+#if ( __MBED__ == 1)
+ // Enable interrupt
+ IRQn_Type irqn = (IRQn_Type)(AUDIO_OUT_SAIx_DMAx_IRQ);
+ NVIC_ClearPendingIRQ(irqn);
+ NVIC_DisableIRQ(irqn);
+ NVIC_SetPriority(irqn, AUDIO_OUT_IRQ_PREPRIO);
+ NVIC_SetVector(irqn, (uint32_t)AUDIO_OUT_SAIx_DMAx_IRQHandler);
+ NVIC_EnableIRQ(irqn);
+
+#else
+ /* SAI DMA IRQ Channel configuration */
+ HAL_NVIC_SetPriority(AUDIO_OUT_SAIx_DMAx_IRQ, AUDIO_OUT_IRQ_PREPRIO, 0);
+ HAL_NVIC_EnableIRQ(AUDIO_OUT_SAIx_DMAx_IRQ);
+#endif
+}
+
+/**
+ * @brief Deinitializes SAI MSP.
+ * @param hsai: SAI handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_AUDIO_OUT_MspDeInit(SAI_HandleTypeDef *hsai, void *Params)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* SAI DMA IRQ Channel deactivation */
+ HAL_NVIC_DisableIRQ(AUDIO_OUT_SAIx_DMAx_IRQ);
+
+ if(hsai->Instance == AUDIO_OUT_SAIx)
+ {
+ /* Deinitialize the DMA stream */
+ HAL_DMA_DeInit(hsai->hdmatx);
+ }
+
+ /* Disable SAI peripheral */
+ __HAL_SAI_DISABLE(hsai);
+
+ /* Deactives CODEC_SAI pins FS, SCK, MCK and SD by putting them in input mode */
+ gpio_init_structure.Pin = AUDIO_OUT_SAIx_FS_PIN;
+ HAL_GPIO_DeInit(AUDIO_OUT_SAIx_FS_GPIO_PORT, gpio_init_structure.Pin);
+
+ gpio_init_structure.Pin = AUDIO_OUT_SAIx_SCK_PIN;
+ HAL_GPIO_DeInit(AUDIO_OUT_SAIx_SCK_SD_GPIO_PORT, gpio_init_structure.Pin);
+
+ gpio_init_structure.Pin = AUDIO_OUT_SAIx_SD_PIN;
+ HAL_GPIO_DeInit(AUDIO_OUT_SAIx_SCK_SD_GPIO_PORT, gpio_init_structure.Pin);
+
+ gpio_init_structure.Pin = AUDIO_OUT_SAIx_MCLK_PIN;
+ HAL_GPIO_DeInit(AUDIO_OUT_SAIx_MCLK_GPIO_PORT, gpio_init_structure.Pin);
+
+ /* Disable SAI clock */
+ AUDIO_OUT_SAIx_CLK_DISABLE();
+
+ /* GPIO pins clock and DMA clock can be shut down in the application
+ by surcharging this __weak function */
+}
+
+/**
+ * @brief Clock Config.
+ * @param hsai: might be required to set audio peripheral predivider if any.
+ * @param AudioFreq: Audio frequency used to play the audio stream.
+ * @param Params
+ * @note This API is called by BSP_AUDIO_OUT_Init() and BSP_AUDIO_OUT_SetFrequency()
+ * Being __weak it can be overwritten by the application
+ * @retval None
+ */
+__weak void BSP_AUDIO_OUT_ClockConfig(SAI_HandleTypeDef *hsai, uint32_t AudioFreq, void *Params)
+{
+ RCC_PeriphCLKInitTypeDef rcc_ex_clk_init_struct;
+
+ HAL_RCCEx_GetPeriphCLKConfig(&rcc_ex_clk_init_struct);
+
+ /* Set the PLL configuration according to the audio frequency */
+ if((AudioFreq == AUDIO_FREQUENCY_11K) || (AudioFreq == AUDIO_FREQUENCY_22K) || (AudioFreq == AUDIO_FREQUENCY_44K))
+ {
+ /* Configure PLLI2S prescalers */
+ /* PLLI2S_VCO: VCO_429M
+ I2S_CLK(first level) = PLLI2S_VCO/PLLI2SQ = 429/2 = 214.5 Mhz
+ I2S_CLK_x = I2S_CLK(first level)/PLLI2SDIVQ = 214.5/19 = 11.289 Mhz */
+ rcc_ex_clk_init_struct.PeriphClockSelection = RCC_PERIPHCLK_SAI2;
+ rcc_ex_clk_init_struct.Sai2ClockSelection = RCC_SAI2CLKSOURCE_PLLI2S;
+ rcc_ex_clk_init_struct.PLLI2S.PLLI2SN = 429;
+ rcc_ex_clk_init_struct.PLLI2S.PLLI2SQ = 2;
+ rcc_ex_clk_init_struct.PLLI2SDivQ = 19;
+
+ HAL_RCCEx_PeriphCLKConfig(&rcc_ex_clk_init_struct);
+
+ }
+ else /* AUDIO_FREQUENCY_8K, AUDIO_FREQUENCY_16K, AUDIO_FREQUENCY_48K), AUDIO_FREQUENCY_96K */
+ {
+ /* I2S clock config
+ PLLI2S_VCO: VCO_344M
+ I2S_CLK(first level) = PLLI2S_VCO/PLLI2SQ = 344/7 = 49.142 Mhz
+ I2S_CLK_x = I2S_CLK(first level)/PLLI2SDIVQ = 49.142/1 = 49.142 Mhz */
+ rcc_ex_clk_init_struct.PeriphClockSelection = RCC_PERIPHCLK_SAI2;
+ rcc_ex_clk_init_struct.Sai2ClockSelection = RCC_SAI2CLKSOURCE_PLLI2S;
+ rcc_ex_clk_init_struct.PLLI2S.PLLI2SN = 344;
+ rcc_ex_clk_init_struct.PLLI2S.PLLI2SQ = 7;
+ rcc_ex_clk_init_struct.PLLI2SDivQ = 1;
+
+ HAL_RCCEx_PeriphCLKConfig(&rcc_ex_clk_init_struct);
+ }
+}
+
+/*******************************************************************************
+ Static Functions
+*******************************************************************************/
+
+/**
+ * @brief Initializes the output Audio Codec audio interface (SAI).
+ * @param AudioFreq: Audio frequency to be configured for the SAI peripheral.
+ * @note The default SlotActive configuration is set to CODEC_AUDIOFRAME_SLOT_0123
+ * and user can update this configuration using
+ * @retval None
+ */
+static void SAIx_Out_Init(uint32_t AudioFreq)
+{
+ /* Initialize the haudio_out_sai Instance parameter */
+ haudio_out_sai.Instance = AUDIO_OUT_SAIx;
+
+ /* Disable SAI peripheral to allow access to SAI internal registers */
+ __HAL_SAI_DISABLE(&haudio_out_sai);
+
+ /* Configure SAI_Block_x
+ LSBFirst: Disabled
+ DataSize: 16 */
+ haudio_out_sai.Init.AudioFrequency = AudioFreq;
+ haudio_out_sai.Init.AudioMode = SAI_MODEMASTER_TX;
+ haudio_out_sai.Init.NoDivider = SAI_MASTERDIVIDER_ENABLED;
+ haudio_out_sai.Init.Protocol = SAI_FREE_PROTOCOL;
+ haudio_out_sai.Init.DataSize = SAI_DATASIZE_16;
+ haudio_out_sai.Init.FirstBit = SAI_FIRSTBIT_MSB;
+ haudio_out_sai.Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE;
+ haudio_out_sai.Init.Synchro = SAI_ASYNCHRONOUS;
+ haudio_out_sai.Init.OutputDrive = SAI_OUTPUTDRIVE_ENABLED;
+ haudio_out_sai.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_1QF;
+
+ /* Configure SAI_Block_x Frame
+ Frame Length: 64
+ Frame active Length: 32
+ FS Definition: Start frame + Channel Side identification
+ FS Polarity: FS active Low
+ FS Offset: FS asserted one bit before the first bit of slot 0 */
+ haudio_out_sai.FrameInit.FrameLength = 64;
+ haudio_out_sai.FrameInit.ActiveFrameLength = 32;
+ haudio_out_sai.FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION;
+ haudio_out_sai.FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
+ haudio_out_sai.FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
+
+ /* Configure SAI Block_x Slot
+ Slot First Bit Offset: 0
+ Slot Size : 16
+ Slot Number: 4
+ Slot Active: All slot actives */
+ haudio_out_sai.SlotInit.FirstBitOffset = 0;
+ haudio_out_sai.SlotInit.SlotSize = SAI_SLOTSIZE_DATASIZE;
+ haudio_out_sai.SlotInit.SlotNumber = 4;
+ haudio_out_sai.SlotInit.SlotActive = CODEC_AUDIOFRAME_SLOT_0123;
+
+ HAL_SAI_Init(&haudio_out_sai);
+
+ /* Enable SAI peripheral to generate MCLK */
+ __HAL_SAI_ENABLE(&haudio_out_sai);
+}
+
+
+
+/**
+ * @brief Deinitializes the output Audio Codec audio interface (SAI).
+ * @retval None
+ */
+static void SAIx_Out_DeInit(void)
+{
+ /* Initialize the haudio_out_sai Instance parameter */
+ haudio_out_sai.Instance = AUDIO_OUT_SAIx;
+
+ /* Disable SAI peripheral */
+ __HAL_SAI_DISABLE(&haudio_out_sai);
+
+ HAL_SAI_DeInit(&haudio_out_sai);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_Out_Private_Functions STM32746G_DISCOVERY_AUDIO Out Private Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes wave recording.
+ * @param InputDevice: INPUT_DEVICE_DIGITAL_MICROPHONE_2 or INPUT_DEVICE_INPUT_LINE_1
+ * @param Volume: Initial volume level (in range 0(Mute)..80(+0dB)..100(+17.625dB))
+ * @param AudioFreq: Audio frequency to be configured for the SAI peripheral.
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_IN_Init(uint16_t InputDevice, uint8_t Volume, uint32_t AudioFreq)
+{
+ uint8_t ret = AUDIO_ERROR;
+ uint32_t deviceid = 0x00;
+ uint32_t slot_active;
+
+ if ((InputDevice != INPUT_DEVICE_INPUT_LINE_1) && /* Only INPUT_LINE_1 and MICROPHONE_2 inputs supported */
+ (InputDevice != INPUT_DEVICE_DIGITAL_MICROPHONE_2))
+ {
+ ret = AUDIO_ERROR;
+ }
+ else
+ {
+ /* Disable SAI */
+ SAIx_In_DeInit();
+
+ /* PLL clock is set depending on the AudioFreq (44.1khz vs 48khz groups) */
+ BSP_AUDIO_OUT_ClockConfig(&haudio_in_sai, AudioFreq, NULL); /* Clock config is shared between AUDIO IN and OUT */
+
+ /* SAI data transfer preparation:
+ Prepare the Media to be used for the audio transfer from SAI peripheral to memory */
+ haudio_in_sai.Instance = AUDIO_IN_SAIx;
+ if(HAL_SAI_GetState(&haudio_in_sai) == HAL_SAI_STATE_RESET)
+ {
+ /* Init the SAI MSP: this __weak function can be redefined by the application*/
+ BSP_AUDIO_OUT_MspInit(&haudio_in_sai, NULL); /* Initialize GPIOs for SAI2 block A Master signals */
+ BSP_AUDIO_IN_MspInit(&haudio_in_sai, NULL);
+ }
+
+ /* Configure SAI in master RX mode :
+ * - SAI2_block_A in master RX mode
+ * - SAI2_block_B in slave RX mode synchronous from SAI2_block_A
+ */
+ if (InputDevice == INPUT_DEVICE_DIGITAL_MICROPHONE_2)
+ {
+ slot_active = CODEC_AUDIOFRAME_SLOT_13;
+ }
+ else
+ {
+ slot_active = CODEC_AUDIOFRAME_SLOT_02;
+ }
+ SAIx_In_Init(SAI_MODEMASTER_RX, slot_active, AudioFreq);
+
+ /* wm8994 codec initialization */
+ deviceid = wm8994_drv.ReadID(AUDIO_I2C_ADDRESS);
+
+ if((deviceid) == WM8994_ID)
+ {
+ /* Reset the Codec Registers */
+ wm8994_drv.Reset(AUDIO_I2C_ADDRESS);
+ /* Initialize the audio driver structure */
+ audio_drv = &wm8994_drv;
+ ret = AUDIO_OK;
+ }
+ else
+ {
+ ret = AUDIO_ERROR;
+ }
+
+ if(ret == AUDIO_OK)
+ {
+ /* Initialize the codec internal registers */
+ audio_drv->Init(AUDIO_I2C_ADDRESS, InputDevice, Volume, AudioFreq);
+ }
+ }
+ return ret;
+}
+
+/**
+ * @brief Initializes wave recording and playback in parallel.
+ * @param InputDevice: INPUT_DEVICE_DIGITAL_MICROPHONE_2
+ * @param OutputDevice: OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE,
+ * or OUTPUT_DEVICE_BOTH.
+ * @param Volume: Initial volume level (in range 0(Mute)..80(+0dB)..100(+17.625dB))
+ * @param AudioFreq: Audio frequency to be configured for the SAI peripheral.
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_IN_OUT_Init(uint16_t InputDevice, uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq)
+{
+ uint8_t ret = AUDIO_ERROR;
+ uint32_t deviceid = 0x00;
+ uint32_t slot_active;
+
+ if (InputDevice != INPUT_DEVICE_DIGITAL_MICROPHONE_2) /* Only MICROPHONE_2 input supported */
+ {
+ ret = AUDIO_ERROR;
+ }
+ else
+ {
+ /* Disable SAI */
+ SAIx_In_DeInit();
+ SAIx_Out_DeInit();
+
+ /* PLL clock is set depending on the AudioFreq (44.1khz vs 48khz groups) */
+ BSP_AUDIO_OUT_ClockConfig(&haudio_in_sai, AudioFreq, NULL); /* Clock config is shared between AUDIO IN and OUT */
+
+ /* SAI data transfer preparation:
+ Prepare the Media to be used for the audio transfer from SAI peripheral to memory */
+ haudio_in_sai.Instance = AUDIO_IN_SAIx;
+ if(HAL_SAI_GetState(&haudio_in_sai) == HAL_SAI_STATE_RESET)
+ {
+ /* Init the SAI MSP: this __weak function can be redefined by the application*/
+ BSP_AUDIO_IN_MspInit(&haudio_in_sai, NULL);
+ }
+
+ /* SAI data transfer preparation:
+ Prepare the Media to be used for the audio transfer from memory to SAI peripheral */
+ haudio_out_sai.Instance = AUDIO_OUT_SAIx;
+ if(HAL_SAI_GetState(&haudio_out_sai) == HAL_SAI_STATE_RESET)
+ {
+ /* Init the SAI MSP: this __weak function can be redefined by the application*/
+ BSP_AUDIO_OUT_MspInit(&haudio_out_sai, NULL);
+ }
+
+ /* Configure SAI in master mode :
+ * - SAI2_block_A in master TX mode
+ * - SAI2_block_B in slave RX mode synchronous from SAI2_block_A
+ */
+ if (InputDevice == INPUT_DEVICE_DIGITAL_MICROPHONE_2)
+ {
+ slot_active = CODEC_AUDIOFRAME_SLOT_13;
+ }
+ else
+ {
+ slot_active = CODEC_AUDIOFRAME_SLOT_02;
+ }
+ SAIx_In_Init(SAI_MODEMASTER_TX, slot_active, AudioFreq);
+
+ /* wm8994 codec initialization */
+ deviceid = wm8994_drv.ReadID(AUDIO_I2C_ADDRESS);
+
+ if((deviceid) == WM8994_ID)
+ {
+ /* Reset the Codec Registers */
+ wm8994_drv.Reset(AUDIO_I2C_ADDRESS);
+ /* Initialize the audio driver structure */
+ audio_drv = &wm8994_drv;
+ ret = AUDIO_OK;
+ }
+ else
+ {
+ ret = AUDIO_ERROR;
+ }
+
+ if(ret == AUDIO_OK)
+ {
+ /* Initialize the codec internal registers */
+ audio_drv->Init(AUDIO_I2C_ADDRESS, InputDevice | OutputDevice, Volume, AudioFreq);
+ }
+ }
+ return ret;
+}
+
+
+/**
+ * @brief Starts audio recording.
+ * @param pbuf: Main buffer pointer for the recorded data storing
+ * @param size: size of the recorded buffer in number of elements (typically number of half-words)
+ * Be careful that it is not the same unit than BSP_AUDIO_OUT_Play function
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_IN_Record(uint16_t* pbuf, uint32_t size)
+{
+ uint32_t ret = AUDIO_ERROR;
+
+ /* Start the process receive DMA */
+ HAL_SAI_Receive_DMA(&haudio_in_sai, (uint8_t*)pbuf, size);
+
+ /* Return AUDIO_OK when all operations are correctly done */
+ ret = AUDIO_OK;
+
+ return ret;
+}
+
+/**
+ * @brief Stops audio recording.
+ * @param Option: could be one of the following parameters
+ * - CODEC_PDWN_SW: for software power off (by writing registers).
+ * Then no need to reconfigure the Codec after power on.
+ * - CODEC_PDWN_HW: completely shut down the codec (physically).
+ * Then need to reconfigure the Codec after power on.
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_IN_Stop(uint32_t Option)
+{
+ /* Call the Media layer stop function */
+ HAL_SAI_DMAStop(&haudio_in_sai);
+
+ /* Call Audio Codec Stop function */
+ if(audio_drv->Stop(AUDIO_I2C_ADDRESS, Option) != 0)
+ {
+ return AUDIO_ERROR;
+ }
+ else
+ {
+ if(Option == CODEC_PDWN_HW)
+ {
+ /* Wait at least 100us */
+ HAL_Delay(1);
+ }
+ /* Return AUDIO_OK when all operations are correctly done */
+ return AUDIO_OK;
+ }
+}
+
+/**
+ * @brief Pauses the audio file stream.
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_IN_Pause(void)
+{
+ /* Call the Media layer pause function */
+ HAL_SAI_DMAPause(&haudio_in_sai);
+ /* Return AUDIO_OK when all operations are correctly done */
+ return AUDIO_OK;
+}
+
+/**
+ * @brief Resumes the audio file stream.
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_IN_Resume(void)
+{
+ /* Call the Media layer pause/resume function */
+ HAL_SAI_DMAResume(&haudio_in_sai);
+ /* Return AUDIO_OK when all operations are correctly done */
+ return AUDIO_OK;
+}
+
+/**
+ * @brief Controls the audio in volume level.
+ * @param Volume: Volume level in range 0(Mute)..80(+0dB)..100(+17.625dB)
+ * @retval AUDIO_OK if correct communication, else wrong communication
+ */
+uint8_t BSP_AUDIO_IN_SetVolume(uint8_t Volume)
+{
+ /* Call the codec volume control function with converted volume value */
+ if(audio_drv->SetVolume(AUDIO_I2C_ADDRESS, Volume) != 0)
+ {
+ return AUDIO_ERROR;
+ }
+ else
+ {
+ /* Set the Global variable AudioInVolume */
+ AudioInVolume = Volume;
+ /* Return AUDIO_OK when all operations are correctly done */
+ return AUDIO_OK;
+ }
+}
+
+/**
+ * @brief Deinit the audio IN peripherals.
+ * @retval None
+ */
+void BSP_AUDIO_IN_DeInit(void)
+{
+ SAIx_In_DeInit();
+ /* DeInit the SAI MSP : this __weak function can be rewritten by the application */
+ BSP_AUDIO_IN_MspDeInit(&haudio_in_sai, NULL);
+}
+
+ /**
+ * @brief Rx Transfer completed callbacks.
+ * @param hsai: SAI handle
+ * @retval None
+ */
+void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai)
+{
+ /* Call the record update function to get the next buffer to fill and its size (size is ignored) */
+ BSP_AUDIO_IN_TransferComplete_CallBack();
+}
+
+/**
+ * @brief Rx Half Transfer completed callbacks.
+ * @param hsai: SAI handle
+ * @retval None
+ */
+void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai)
+{
+ /* Manage the remaining file size and new address offset: This function
+ should be coded by user (its prototype is already declared in stm32746g_discovery_audio.h) */
+ BSP_AUDIO_IN_HalfTransfer_CallBack();
+}
+
+/**
+ * @brief User callback when record buffer is filled.
+ * @retval None
+ */
+__weak void BSP_AUDIO_IN_TransferComplete_CallBack(void)
+{
+ /* This function should be implemented by the user application.
+ It is called into this driver when the current buffer is filled
+ to prepare the next buffer pointer and its size. */
+}
+
+/**
+ * @brief Manages the DMA Half Transfer complete event.
+ * @retval None
+ */
+__weak void BSP_AUDIO_IN_HalfTransfer_CallBack(void)
+{
+ /* This function should be implemented by the user application.
+ It is called into this driver when the current buffer is filled
+ to prepare the next buffer pointer and its size. */
+}
+
+/**
+ * @brief Audio IN Error callback function.
+ * @retval None
+ */
+__weak void BSP_AUDIO_IN_Error_CallBack(void)
+{
+ /* This function is called when an Interrupt due to transfer error on or peripheral
+ error occurs. */
+}
+
+/**
+ * @brief Initializes BSP_AUDIO_IN MSP.
+ * @param hsai: SAI handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_AUDIO_IN_MspInit(SAI_HandleTypeDef *hsai, void *Params)
+{
+ static DMA_HandleTypeDef hdma_sai_rx;
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* Enable SAI clock */
+ AUDIO_IN_SAIx_CLK_ENABLE();
+
+ /* Enable SD GPIO clock */
+ AUDIO_IN_SAIx_SD_ENABLE();
+ /* CODEC_SAI pin configuration: SD pin */
+ gpio_init_structure.Pin = AUDIO_IN_SAIx_SD_PIN;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_FAST;
+ gpio_init_structure.Alternate = AUDIO_IN_SAIx_SD_AF;
+ HAL_GPIO_Init(AUDIO_IN_SAIx_SD_GPIO_PORT, &gpio_init_structure);
+
+ /* Enable Audio INT GPIO clock */
+ AUDIO_IN_INT_GPIO_ENABLE();
+ /* Audio INT pin configuration: input */
+ gpio_init_structure.Pin = AUDIO_IN_INT_GPIO_PIN;
+ gpio_init_structure.Mode = GPIO_MODE_INPUT;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_FAST;
+ HAL_GPIO_Init(AUDIO_IN_INT_GPIO_PORT, &gpio_init_structure);
+
+ /* Enable the DMA clock */
+ AUDIO_IN_SAIx_DMAx_CLK_ENABLE();
+
+ if(hsai->Instance == AUDIO_IN_SAIx)
+ {
+ /* Configure the hdma_sai_rx handle parameters */
+ hdma_sai_rx.Init.Channel = AUDIO_IN_SAIx_DMAx_CHANNEL;
+ hdma_sai_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
+ hdma_sai_rx.Init.PeriphInc = DMA_PINC_DISABLE;
+ hdma_sai_rx.Init.MemInc = DMA_MINC_ENABLE;
+ hdma_sai_rx.Init.PeriphDataAlignment = AUDIO_IN_SAIx_DMAx_PERIPH_DATA_SIZE;
+ hdma_sai_rx.Init.MemDataAlignment = AUDIO_IN_SAIx_DMAx_MEM_DATA_SIZE;
+ hdma_sai_rx.Init.Mode = DMA_CIRCULAR;
+ hdma_sai_rx.Init.Priority = DMA_PRIORITY_HIGH;
+ hdma_sai_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
+ hdma_sai_rx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
+ hdma_sai_rx.Init.MemBurst = DMA_MBURST_SINGLE;
+ hdma_sai_rx.Init.PeriphBurst = DMA_MBURST_SINGLE;
+
+ hdma_sai_rx.Instance = AUDIO_IN_SAIx_DMAx_STREAM;
+
+ /* Associate the DMA handle */
+ __HAL_LINKDMA(hsai, hdmarx, hdma_sai_rx);
+
+ /* Deinitialize the Stream for new transfer */
+ HAL_DMA_DeInit(&hdma_sai_rx);
+
+ /* Configure the DMA Stream */
+ HAL_DMA_Init(&hdma_sai_rx);
+ }
+
+ /* SAI DMA IRQ Channel configuration */
+#if ( __MBED__ == 1)
+ IRQn_Type irqn = (IRQn_Type)(AUDIO_IN_SAIx_DMAx_IRQ);
+ NVIC_ClearPendingIRQ(irqn);
+ NVIC_DisableIRQ(irqn);
+ NVIC_SetPriority(irqn, AUDIO_IN_IRQ_PREPRIO);
+ NVIC_SetVector(irqn, (uint32_t)AUDIO_IN_SAIx_DMAx_IRQHandler);
+ NVIC_EnableIRQ(irqn);
+#else
+ HAL_NVIC_SetPriority(AUDIO_IN_SAIx_DMAx_IRQ, AUDIO_IN_IRQ_PREPRIO, 0);
+ HAL_NVIC_EnableIRQ(AUDIO_IN_SAIx_DMAx_IRQ);
+#endif
+
+ /* Audio INT IRQ Channel configuration */
+#if ( __MBED__ == 1)
+ irqn = (IRQn_Type)(AUDIO_IN_INT_IRQ);
+ NVIC_ClearPendingIRQ(irqn);
+ NVIC_DisableIRQ(irqn);
+ NVIC_SetPriority(irqn, AUDIO_IN_IRQ_PREPRIO);
+ NVIC_SetVector(irqn, (uint32_t)AUDIO_IN_INT_IRQHandler);
+ NVIC_EnableIRQ(irqn);
+#else
+ HAL_NVIC_SetPriority(AUDIO_IN_INT_IRQ, AUDIO_IN_IRQ_PREPRIO, 0);
+ HAL_NVIC_EnableIRQ(AUDIO_IN_INT_IRQ);
+#endif
+}
+
+/**
+ * @brief DeInitializes BSP_AUDIO_IN MSP.
+ * @param hsai: SAI handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_AUDIO_IN_MspDeInit(SAI_HandleTypeDef *hsai, void *Params)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ static DMA_HandleTypeDef hdma_sai_rx;
+
+ /* SAI IN DMA IRQ Channel deactivation */
+ HAL_NVIC_DisableIRQ(AUDIO_IN_SAIx_DMAx_IRQ);
+
+ if(hsai->Instance == AUDIO_IN_SAIx)
+ {
+ /* Deinitialize the Stream for new transfer */
+ HAL_DMA_DeInit(&hdma_sai_rx);
+ }
+
+ /* Disable SAI block */
+ __HAL_SAI_DISABLE(hsai);
+
+ /* Disable pin: SD pin */
+ gpio_init_structure.Pin = AUDIO_IN_SAIx_SD_PIN;
+ HAL_GPIO_DeInit(AUDIO_IN_SAIx_SD_GPIO_PORT, gpio_init_structure.Pin);
+
+ /* Disable SAI clock */
+ AUDIO_IN_SAIx_CLK_DISABLE();
+
+ /* GPIO pins clock and DMA clock can be shut down in the application
+ by surcharging this __weak function */
+}
+
+
+/*******************************************************************************
+ Static Functions
+*******************************************************************************/
+
+/**
+ * @brief Initializes the input Audio Codec audio interface (SAI).
+ * @param SaiOutMode: SAI_MODEMASTER_TX (for record and playback in parallel)
+ * or SAI_MODEMASTER_RX (for record only).
+ * @param SlotActive: CODEC_AUDIOFRAME_SLOT_02 or CODEC_AUDIOFRAME_SLOT_13
+ * @param AudioFreq: Audio frequency to be configured for the SAI peripheral.
+ * @retval None
+ */
+static void SAIx_In_Init(uint32_t SaiOutMode, uint32_t SlotActive, uint32_t AudioFreq)
+{
+ /* Initialize SAI2 block A in MASTER RX */
+ /* Initialize the haudio_out_sai Instance parameter */
+ haudio_out_sai.Instance = AUDIO_OUT_SAIx;
+
+ /* Disable SAI peripheral to allow access to SAI internal registers */
+ __HAL_SAI_DISABLE(&haudio_out_sai);
+
+ /* Configure SAI_Block_x
+ LSBFirst: Disabled
+ DataSize: 16 */
+ haudio_out_sai.Init.AudioFrequency = AudioFreq;
+ haudio_out_sai.Init.AudioMode = SaiOutMode;
+ haudio_out_sai.Init.NoDivider = SAI_MASTERDIVIDER_ENABLED;
+ haudio_out_sai.Init.Protocol = SAI_FREE_PROTOCOL;
+ haudio_out_sai.Init.DataSize = SAI_DATASIZE_16;
+ haudio_out_sai.Init.FirstBit = SAI_FIRSTBIT_MSB;
+ haudio_out_sai.Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE;
+ haudio_out_sai.Init.Synchro = SAI_ASYNCHRONOUS;
+ haudio_out_sai.Init.OutputDrive = SAI_OUTPUTDRIVE_ENABLED;
+ haudio_out_sai.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_1QF;
+
+ /* Configure SAI_Block_x Frame
+ Frame Length: 64
+ Frame active Length: 32
+ FS Definition: Start frame + Channel Side identification
+ FS Polarity: FS active Low
+ FS Offset: FS asserted one bit before the first bit of slot 0 */
+ haudio_out_sai.FrameInit.FrameLength = 64;
+ haudio_out_sai.FrameInit.ActiveFrameLength = 32;
+ haudio_out_sai.FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION;
+ haudio_out_sai.FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
+ haudio_out_sai.FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
+
+ /* Configure SAI Block_x Slot
+ Slot First Bit Offset: 0
+ Slot Size : 16
+ Slot Number: 4
+ Slot Active: All slot actives */
+ haudio_out_sai.SlotInit.FirstBitOffset = 0;
+ haudio_out_sai.SlotInit.SlotSize = SAI_SLOTSIZE_DATASIZE;
+ haudio_out_sai.SlotInit.SlotNumber = 4;
+ haudio_out_sai.SlotInit.SlotActive = SlotActive;
+
+ HAL_SAI_Init(&haudio_out_sai);
+
+ /* Initialize SAI2 block B in SLAVE RX synchronous from SAI2 block A */
+ /* Initialize the haudio_in_sai Instance parameter */
+ haudio_in_sai.Instance = AUDIO_IN_SAIx;
+
+ /* Disable SAI peripheral to allow access to SAI internal registers */
+ __HAL_SAI_DISABLE(&haudio_in_sai);
+
+ /* Configure SAI_Block_x
+ LSBFirst: Disabled
+ DataSize: 16 */
+ haudio_in_sai.Init.AudioFrequency = AudioFreq;
+ haudio_in_sai.Init.AudioMode = SAI_MODESLAVE_RX;
+ haudio_in_sai.Init.NoDivider = SAI_MASTERDIVIDER_ENABLED;
+ haudio_in_sai.Init.Protocol = SAI_FREE_PROTOCOL;
+ haudio_in_sai.Init.DataSize = SAI_DATASIZE_16;
+ haudio_in_sai.Init.FirstBit = SAI_FIRSTBIT_MSB;
+ haudio_in_sai.Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE;
+ haudio_in_sai.Init.Synchro = SAI_SYNCHRONOUS;
+ haudio_in_sai.Init.OutputDrive = SAI_OUTPUTDRIVE_DISABLED;
+ haudio_in_sai.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_1QF;
+
+ /* Configure SAI_Block_x Frame
+ Frame Length: 64
+ Frame active Length: 32
+ FS Definition: Start frame + Channel Side identification
+ FS Polarity: FS active Low
+ FS Offset: FS asserted one bit before the first bit of slot 0 */
+ haudio_in_sai.FrameInit.FrameLength = 64;
+ haudio_in_sai.FrameInit.ActiveFrameLength = 32;
+ haudio_in_sai.FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION;
+ haudio_in_sai.FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
+ haudio_in_sai.FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
+
+ /* Configure SAI Block_x Slot
+ Slot First Bit Offset: 0
+ Slot Size : 16
+ Slot Number: 4
+ Slot Active: All slot active */
+ haudio_in_sai.SlotInit.FirstBitOffset = 0;
+ haudio_in_sai.SlotInit.SlotSize = SAI_SLOTSIZE_DATASIZE;
+ haudio_in_sai.SlotInit.SlotNumber = 4;
+ haudio_in_sai.SlotInit.SlotActive = SlotActive;
+
+ HAL_SAI_Init(&haudio_in_sai);
+
+ /* Enable SAI peripheral to generate MCLK */
+ __HAL_SAI_ENABLE(&haudio_out_sai);
+
+ /* Enable SAI peripheral */
+ __HAL_SAI_ENABLE(&haudio_in_sai);
+}
+
+
+
+/**
+ * @brief Deinitializes the output Audio Codec audio interface (SAI).
+ * @retval None
+ */
+static void SAIx_In_DeInit(void)
+{
+ /* Initialize the haudio_in_sai Instance parameter */
+ haudio_in_sai.Instance = AUDIO_IN_SAIx;
+
+ /* Disable SAI peripheral */
+ __HAL_SAI_DISABLE(&haudio_in_sai);
+
+ HAL_SAI_DeInit(&haudio_in_sai);
+}
+
+/**
+ * @brief This function handles External line 15_10 interrupt request.
+ * @param None
+ * @retval None
+ */
+static void AUDIO_IN_INT_IRQHandler(void)
+{
+ /* Interrupt handler shared between SD_DETECT pin, USER_KEY button and touch screen interrupt */
+ if (__HAL_GPIO_EXTI_GET_IT(AUDIO_IN_INT_GPIO_PIN) != RESET)
+ {
+ HAL_GPIO_EXTI_IRQHandler(AUDIO_IN_INT_GPIO_PIN); /* Audio Interrupt */
+ }
+}
+
+/**
+ * @brief This function handles DMA2 Stream 7 interrupt request.
+ * @param None
+ * @retval None
+ */
+static void AUDIO_IN_SAIx_DMAx_IRQHandler(void)
+{
+ HAL_DMA_IRQHandler(haudio_in_sai.hdmarx);
+}
+
+/**
+ * @brief This function handles DMA2 Stream 6 interrupt request.
+ * @param None
+ * @retval None
+ */
+static void AUDIO_OUT_SAIx_DMAx_IRQHandler(void)
+{
+ HAL_DMA_IRQHandler(haudio_out_sai.hdmatx);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_audio.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,295 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_audio.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file contains the common defines and functions prototypes for
+ * the stm32746g_discovery_audio.c driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32746G_DISCOVERY_AUDIO_H
+#define __STM32746G_DISCOVERY_AUDIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Include audio component Driver */
+#include "wm8994.h"
+#include "stm32746g_discovery.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO STM32746G_DISCOVERY_AUDIO
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_Exported_Types STM32746G_DISCOVERY_AUDIO Exported Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_Exported_Constants STM32746G_DISCOVERY_AUDIO Exported Constants
+ * @{
+ */
+
+/*------------------------------------------------------------------------------
+ USER SAI defines parameters
+ -----------------------------------------------------------------------------*/
+/* CODEC_AudioFrame_SLOT_TDMMode
+ In W8994 codec the Audio frame contains 4 slots : TDM Mode
+ TDM format :
+ +------------------|------------------|--------------------|-------------------+
+ | CODEC_SLOT0 Left | CODEC_SLOT1 Left | CODEC_SLOT0 Right | CODEC_SLOT1 Right |
+ +------------------------------------------------------------------------------+
+ */
+/* To have 2 separate audio stream in Both headphone and speaker the 4 slot must be activated */
+#define CODEC_AUDIOFRAME_SLOT_0123 SAI_SLOTACTIVE_0 | SAI_SLOTACTIVE_1 | SAI_SLOTACTIVE_2 | SAI_SLOTACTIVE_3
+/* To have an audio stream in headphone only SAI Slot 0 and Slot 2 must be activated */
+#define CODEC_AUDIOFRAME_SLOT_02 SAI_SLOTACTIVE_0 | SAI_SLOTACTIVE_2
+/* To have an audio stream in speaker only SAI Slot 1 and Slot 3 must be activated */
+#define CODEC_AUDIOFRAME_SLOT_13 SAI_SLOTACTIVE_1 | SAI_SLOTACTIVE_3
+
+/* SAI OUT peripheral configuration defines */
+#define AUDIO_OUT_SAIx SAI2_Block_A
+#define AUDIO_OUT_SAIx_CLK_ENABLE() __HAL_RCC_SAI2_CLK_ENABLE()
+#define AUDIO_OUT_SAIx_CLK_DISABLE() __HAL_RCC_SAI2_CLK_DISABLE()
+#define AUDIO_OUT_SAIx_SCK_AF GPIO_AF10_SAI2
+#define AUDIO_OUT_SAIx_FS_SD_MCLK_AF GPIO_AF10_SAI2
+
+#define AUDIO_OUT_SAIx_MCLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE()
+#define AUDIO_OUT_SAIx_MCLK_GPIO_PORT GPIOI
+#define AUDIO_OUT_SAIx_MCLK_PIN GPIO_PIN_4
+#define AUDIO_OUT_SAIx_SCK_SD_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE()
+#define AUDIO_OUT_SAIx_SCK_SD_GPIO_PORT GPIOI
+#define AUDIO_OUT_SAIx_SCK_PIN GPIO_PIN_5
+#define AUDIO_OUT_SAIx_SD_PIN GPIO_PIN_6
+#define AUDIO_OUT_SAIx_FS_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE()
+#define AUDIO_OUT_SAIx_FS_GPIO_PORT GPIOI
+#define AUDIO_OUT_SAIx_FS_PIN GPIO_PIN_7
+
+/* SAI DMA Stream definitions */
+#define AUDIO_OUT_SAIx_DMAx_CLK_ENABLE() __HAL_RCC_DMA2_CLK_ENABLE()
+#define AUDIO_OUT_SAIx_DMAx_STREAM DMA2_Stream4
+#define AUDIO_OUT_SAIx_DMAx_CHANNEL DMA_CHANNEL_3
+#define AUDIO_OUT_SAIx_DMAx_IRQ DMA2_Stream4_IRQn
+#define AUDIO_OUT_SAIx_DMAx_PERIPH_DATA_SIZE DMA_PDATAALIGN_HALFWORD
+#define AUDIO_OUT_SAIx_DMAx_MEM_DATA_SIZE DMA_MDATAALIGN_HALFWORD
+#define DMA_MAX_SZE ((uint16_t)0xFFFF)
+
+#define AUDIO_OUT_SAIx_DMAx_IRQHandler DMA2_Stream4_IRQHandler
+
+/* Select the interrupt preemption priority for the DMA interrupt */
+#define AUDIO_OUT_IRQ_PREPRIO ((uint32_t)5) /* Select the preemption priority level(0 is the highest) */
+
+/*------------------------------------------------------------------------------
+ AUDIO IN CONFIGURATION
+------------------------------------------------------------------------------*/
+/* SAI IN peripheral configuration defines */
+#define AUDIO_IN_SAIx SAI2_Block_B
+#define AUDIO_IN_SAIx_CLK_ENABLE() __HAL_RCC_SAI2_CLK_ENABLE()
+#define AUDIO_IN_SAIx_CLK_DISABLE() __HAL_RCC_SAI2_CLK_DISABLE()
+#define AUDIO_IN_SAIx_SD_AF GPIO_AF10_SAI2
+
+#define AUDIO_IN_SAIx_SD_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE()
+#define AUDIO_IN_SAIx_SD_GPIO_PORT GPIOG
+#define AUDIO_IN_SAIx_SD_PIN GPIO_PIN_10
+
+#define AUDIO_IN_INT_GPIO_ENABLE() __HAL_RCC_GPIOH_CLK_ENABLE()
+#define AUDIO_IN_INT_GPIO_PORT GPIOH
+#define AUDIO_IN_INT_GPIO_PIN GPIO_PIN_15
+#define AUDIO_IN_INT_IRQ EXTI15_10_IRQn
+
+/* SAI DMA Stream definitions */
+#define AUDIO_IN_SAIx_DMAx_CLK_ENABLE() __HAL_RCC_DMA2_CLK_ENABLE()
+#define AUDIO_IN_SAIx_DMAx_STREAM DMA2_Stream7
+#define AUDIO_IN_SAIx_DMAx_CHANNEL DMA_CHANNEL_0
+#define AUDIO_IN_SAIx_DMAx_IRQ DMA2_Stream7_IRQn
+#define AUDIO_IN_SAIx_DMAx_PERIPH_DATA_SIZE DMA_PDATAALIGN_HALFWORD
+#define AUDIO_IN_SAIx_DMAx_MEM_DATA_SIZE DMA_MDATAALIGN_HALFWORD
+
+#define AUDIO_IN_SAIx_DMAx_IRQHandler DMA2_Stream7_IRQHandler
+#define AUDIO_IN_INT_IRQHandler EXTI15_10_IRQHandler
+
+/* Select the interrupt preemption priority and subpriority for the IT/DMA interrupt */
+#define AUDIO_IN_IRQ_PREPRIO ((uint32_t)6) /* Select the preemption priority level(0 is the highest) */
+
+/*------------------------------------------------------------------------------
+ CONFIGURATION: Audio Driver Configuration parameters
+------------------------------------------------------------------------------*/
+
+#define AUDIODATA_SIZE ((uint16_t)2) /* 16-bits audio data size */
+
+/* Audio status definition */
+#define AUDIO_OK ((uint8_t)0)
+#define AUDIO_ERROR ((uint8_t)1)
+#define AUDIO_TIMEOUT ((uint8_t)2)
+
+/* AudioFreq * DataSize (2 bytes) * NumChannels (Stereo: 2) */
+#define DEFAULT_AUDIO_IN_FREQ I2S_AUDIOFREQ_16K
+#define DEFAULT_AUDIO_IN_BIT_RESOLUTION ((uint8_t)16)
+#define DEFAULT_AUDIO_IN_CHANNEL_NBR ((uint8_t)2) /* Mono = 1, Stereo = 2 */
+#define DEFAULT_AUDIO_IN_VOLUME ((uint16_t)64)
+
+/*------------------------------------------------------------------------------
+ OPTIONAL Configuration defines parameters
+------------------------------------------------------------------------------*/
+
+/* Delay for the Codec to be correctly reset */
+#define CODEC_RESET_DELAY ((uint8_t)5)
+
+
+/*------------------------------------------------------------------------------
+ OUTPUT DEVICES definition
+------------------------------------------------------------------------------*/
+
+/* Alias on existing output devices to adapt to Birdie discovery board 2 headphones output */
+#define OUTPUT_DEVICE_HEADPHONE1 OUTPUT_DEVICE_HEADPHONE
+#define OUTPUT_DEVICE_HEADPHONE2 OUTPUT_DEVICE_SPEAKER /* Headphone2 is connected to Speaker output of the wm8994 */
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_Exported_Variables STM32746G_DISCOVERY_AUDIO Exported Variables
+ * @{
+ */
+extern __IO uint16_t AudioInVolume;
+ /**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_Exported_Macros STM32746G_DISCOVERY_AUDIO Exported Macros
+ * @{
+ */
+#define DMA_MAX(x) (((x) <= DMA_MAX_SZE)? (x):DMA_MAX_SZE)
+/**
+ * @}
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_AUDIO_OUT_Exported_Functions
+ * @{
+ */
+uint8_t BSP_AUDIO_OUT_Init(uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq);
+uint8_t BSP_AUDIO_OUT_Play(uint16_t* pBuffer, uint32_t Size);
+void BSP_AUDIO_OUT_ChangeBuffer(uint16_t *pData, uint16_t Size);
+uint8_t BSP_AUDIO_OUT_Pause(void);
+uint8_t BSP_AUDIO_OUT_Resume(void);
+uint8_t BSP_AUDIO_OUT_Stop(uint32_t Option);
+uint8_t BSP_AUDIO_OUT_SetVolume(uint8_t Volume);
+void BSP_AUDIO_OUT_SetFrequency(uint32_t AudioFreq);
+void BSP_AUDIO_OUT_SetAudioFrameSlot(uint32_t AudioFrameSlot);
+uint8_t BSP_AUDIO_OUT_SetMute(uint32_t Cmd);
+uint8_t BSP_AUDIO_OUT_SetOutputMode(uint8_t Output);
+void BSP_AUDIO_OUT_DeInit(void);
+
+/* User Callbacks: user has to implement these functions in his code if they are needed. */
+/* This function is called when the requested data has been completely transferred.*/
+void BSP_AUDIO_OUT_TransferComplete_CallBack(void);
+
+/* This function is called when half of the requested buffer has been transferred. */
+void BSP_AUDIO_OUT_HalfTransfer_CallBack(void);
+
+/* This function is called when an Interrupt due to transfer error on or peripheral
+ error occurs. */
+void BSP_AUDIO_OUT_Error_CallBack(void);
+
+/* These function can be modified in case the current settings (e.g. DMA stream)
+ need to be changed for specific application needs */
+void BSP_AUDIO_OUT_ClockConfig(SAI_HandleTypeDef *hsai, uint32_t AudioFreq, void *Params);
+void BSP_AUDIO_OUT_MspInit(SAI_HandleTypeDef *hsai, void *Params);
+void BSP_AUDIO_OUT_MspDeInit(SAI_HandleTypeDef *hsai, void *Params);
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_IN_Exported_Functions STM32746G_DISCOVERY_AUDIO_IN Exported Functions
+ * @{
+ */
+uint8_t BSP_AUDIO_IN_Init(uint16_t InputDevice, uint8_t Volume, uint32_t AudioFreq);
+uint8_t BSP_AUDIO_IN_OUT_Init(uint16_t InputDevice, uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq);
+uint8_t BSP_AUDIO_IN_Record(uint16_t *pData, uint32_t Size);
+uint8_t BSP_AUDIO_IN_Stop(uint32_t Option);
+uint8_t BSP_AUDIO_IN_Pause(void);
+uint8_t BSP_AUDIO_IN_Resume(void);
+uint8_t BSP_AUDIO_IN_SetVolume(uint8_t Volume);
+void BSP_AUDIO_IN_DeInit(void);
+/* User Callbacks: user has to implement these functions in his code if they are needed. */
+/* This function should be implemented by the user application.
+ It is called into this driver when the current buffer is filled to prepare the next
+ buffer pointer and its size. */
+void BSP_AUDIO_IN_TransferComplete_CallBack(void);
+void BSP_AUDIO_IN_HalfTransfer_CallBack(void);
+
+/* This function is called when an Interrupt due to transfer error on or peripheral
+ error occurs. */
+void BSP_AUDIO_IN_Error_CallBack(void);
+
+/* These function can be modified in case the current settings (e.g. DMA stream)
+ need to be changed for specific application needs */
+void BSP_AUDIO_IN_MspInit(SAI_HandleTypeDef *hsai, void *Params);
+void BSP_AUDIO_IN_MspDeInit(SAI_HandleTypeDef *hsai, void *Params);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32746G_DISCOVERY_AUDIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_camera.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,674 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_camera.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file includes the driver for Camera modules mounted on
+ * STM32746G-Discovery board.
+ @verbatim
+ How to use this driver:
+ ------------------------
+ - This driver is used to drive the camera.
+ - The OV9655 component driver MUST be included with this driver.
+
+ Driver description:
+ -------------------
+ + Initialization steps:
+ o Initialize the camera using the BSP_CAMERA_Init() function.
+ o Start the camera capture/snapshot using the CAMERA_Start() function.
+ o Suspend, resume or stop the camera capture using the following functions:
+ - BSP_CAMERA_Suspend()
+ - BSP_CAMERA_Resume()
+ - BSP_CAMERA_Stop()
+
+ + Options
+ o Increase or decrease on the fly the brightness and/or contrast
+ using the following function:
+ - BSP_CAMERA_ContrastBrightnessConfig
+ o Add a special effect on the fly using the following functions:
+ - BSP_CAMERA_BlackWhiteConfig()
+ - BSP_CAMERA_ColorEffectConfig()
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32746g_discovery_camera.h"
+#include "stm32746g_discovery.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_CAMERA
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_CAMERA_Private_TypesDefinitions STM32746G_DISCOVERY_CAMERA Private Types Definitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_CAMERA_Private_Defines STM32746G_DISCOVERY_CAMERA Private Defines
+ * @{
+ */
+#define CAMERA_VGA_RES_X 640
+#define CAMERA_VGA_RES_Y 480
+#define CAMERA_480x272_RES_X 480
+#define CAMERA_480x272_RES_Y 272
+#define CAMERA_QVGA_RES_X 320
+#define CAMERA_QVGA_RES_Y 240
+#define CAMERA_QQVGA_RES_X 160
+#define CAMERA_QQVGA_RES_Y 120
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_CAMERA_Private_Macros STM32746G_DISCOVERY_CAMERA Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_CAMERA_Private_Variables STM32746G_DISCOVERY_CAMERA Private Variables
+ * @{
+ */
+static DCMI_HandleTypeDef hDcmiHandler;
+ CAMERA_DrvTypeDef *camera_drv;
+/* Camera current resolution naming (QQVGA, VGA, ...) */
+static uint32_t CameraCurrentResolution;
+
+/* Camera module I2C HW address */
+static uint32_t CameraHwAddress;
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_CAMERA_Private_FunctionPrototypes STM32746G_DISCOVERY_CAMERA Private Function Prototypes
+ * @{
+ */
+static uint32_t GetSize(uint32_t resolution);
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_CAMERA_Exported_Functions STM32746G_DISCOVERY_CAMERA Exported Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes the camera.
+ * @param Resolution : camera sensor requested resolution (x, y) : standard resolution
+ * naming QQVGA, QVGA, VGA ...
+ * @retval Camera status
+ */
+uint8_t BSP_CAMERA_Init(uint32_t Resolution)
+{
+ DCMI_HandleTypeDef *phdcmi;
+ uint8_t status = CAMERA_ERROR;
+
+ /* Get the DCMI handle structure */
+ phdcmi = &hDcmiHandler;
+
+ /*** Configures the DCMI to interface with the camera module ***/
+ /* DCMI configuration */
+ phdcmi->Init.CaptureRate = DCMI_CR_ALL_FRAME;
+ phdcmi->Init.HSPolarity = DCMI_HSPOLARITY_LOW;
+ phdcmi->Init.SynchroMode = DCMI_SYNCHRO_HARDWARE;
+ phdcmi->Init.VSPolarity = DCMI_VSPOLARITY_HIGH;
+ phdcmi->Init.ExtendedDataMode = DCMI_EXTEND_DATA_8B;
+ phdcmi->Init.PCKPolarity = DCMI_PCKPOLARITY_RISING;
+ phdcmi->Instance = DCMI;
+
+ /* Power up camera */
+ BSP_CAMERA_PwrUp();
+
+ /* Read ID of Camera module via I2C */
+ if(ov9655_ReadID(CAMERA_I2C_ADDRESS) == OV9655_ID)
+ {
+ /* Initialize the camera driver structure */
+ camera_drv = &ov9655_drv;
+ CameraHwAddress = CAMERA_I2C_ADDRESS;
+
+ /* DCMI Initialization */
+ BSP_CAMERA_MspInit(&hDcmiHandler, NULL);
+ HAL_DCMI_Init(phdcmi);
+
+ /* Camera Module Initialization via I2C to the wanted 'Resolution' */
+ if (Resolution == CAMERA_R480x272)
+ { /* For 480x272 resolution, the OV9655 sensor is set to VGA resolution
+ * as OV9655 doesn't supports 480x272 resolution,
+ * then DCMI is configured to output a 480x272 cropped window */
+ camera_drv->Init(CameraHwAddress, CAMERA_R640x480);
+ HAL_DCMI_ConfigCROP(phdcmi, /* Crop in the middle of the VGA picture */
+ (CAMERA_VGA_RES_X - CAMERA_480x272_RES_X)/2,
+ (CAMERA_VGA_RES_Y - CAMERA_480x272_RES_Y)/2,
+ (CAMERA_480x272_RES_X * 2) - 1,
+ CAMERA_480x272_RES_Y - 1);
+ HAL_DCMI_EnableCROP(phdcmi);
+ }
+ else
+ {
+ camera_drv->Init(CameraHwAddress, Resolution);
+ HAL_DCMI_DisableCROP(phdcmi);
+ }
+
+ CameraCurrentResolution = Resolution;
+
+ /* Return CAMERA_OK status */
+ status = CAMERA_OK;
+ }
+ else
+ {
+ /* Return CAMERA_NOT_SUPPORTED status */
+ status = CAMERA_NOT_SUPPORTED;
+ }
+
+ return status;
+}
+
+/**
+ * @brief DeInitializes the camera.
+ * @retval Camera status
+ */
+uint8_t BSP_CAMERA_DeInit(void)
+{
+ hDcmiHandler.Instance = DCMI;
+
+ HAL_DCMI_DeInit(&hDcmiHandler);
+ BSP_CAMERA_MspDeInit(&hDcmiHandler, NULL);
+ return CAMERA_OK;
+}
+
+/**
+ * @brief Starts the camera capture in continuous mode.
+ * @param buff: pointer to the camera output buffer
+ * @retval None
+ */
+void BSP_CAMERA_ContinuousStart(uint8_t *buff)
+{
+ /* Start the camera capture */
+ HAL_DCMI_Start_DMA(&hDcmiHandler, DCMI_MODE_CONTINUOUS, (uint32_t)buff, GetSize(CameraCurrentResolution));
+}
+
+/**
+ * @brief Starts the camera capture in snapshot mode.
+ * @param buff: pointer to the camera output buffer
+ * @retval None
+ */
+void BSP_CAMERA_SnapshotStart(uint8_t *buff)
+{
+ /* Start the camera capture */
+ HAL_DCMI_Start_DMA(&hDcmiHandler, DCMI_MODE_SNAPSHOT, (uint32_t)buff, GetSize(CameraCurrentResolution));
+}
+
+/**
+ * @brief Suspend the CAMERA capture
+ * @retval None
+ */
+void BSP_CAMERA_Suspend(void)
+{
+ /* Disable the DMA */
+ __HAL_DMA_DISABLE(hDcmiHandler.DMA_Handle);
+ /* Disable the DCMI */
+ __HAL_DCMI_DISABLE(&hDcmiHandler);
+
+}
+
+/**
+ * @brief Resume the CAMERA capture
+ * @retval None
+ */
+void BSP_CAMERA_Resume(void)
+{
+ /* Enable the DCMI */
+ __HAL_DCMI_ENABLE(&hDcmiHandler);
+ /* Enable the DMA */
+ __HAL_DMA_ENABLE(hDcmiHandler.DMA_Handle);
+}
+
+/**
+ * @brief Stop the CAMERA capture
+ * @retval Camera status
+ */
+uint8_t BSP_CAMERA_Stop(void)
+{
+ uint8_t status = CAMERA_ERROR;
+
+ if(HAL_DCMI_Stop(&hDcmiHandler) == HAL_OK)
+ {
+ status = CAMERA_OK;
+ }
+
+ /* Set Camera in Power Down */
+ BSP_CAMERA_PwrDown();
+
+ return status;
+}
+
+/**
+ * @brief CANERA power up
+ * @retval None
+ */
+void BSP_CAMERA_PwrUp(void)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* Enable GPIO clock */
+ __HAL_RCC_GPIOH_CLK_ENABLE();
+
+ /*** Configure the GPIO ***/
+ /* Configure DCMI GPIO as alternate function */
+ gpio_init_structure.Pin = GPIO_PIN_13;
+ gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ HAL_GPIO_Init(GPIOH, &gpio_init_structure);
+
+ /* De-assert the camera POWER_DOWN pin (active high) */
+ HAL_GPIO_WritePin(GPIOH, GPIO_PIN_13, GPIO_PIN_RESET);
+
+ HAL_Delay(3); /* POWER_DOWN de-asserted during 3ms */
+}
+
+/**
+ * @brief CAMERA power down
+ * @retval None
+ */
+void BSP_CAMERA_PwrDown(void)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* Enable GPIO clock */
+ __HAL_RCC_GPIOH_CLK_ENABLE();
+
+ /*** Configure the GPIO ***/
+ /* Configure DCMI GPIO as alternate function */
+ gpio_init_structure.Pin = GPIO_PIN_13;
+ gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ HAL_GPIO_Init(GPIOH, &gpio_init_structure);
+
+ /* Assert the camera POWER_DOWN pin (active high) */
+ HAL_GPIO_WritePin(GPIOH, GPIO_PIN_13, GPIO_PIN_SET);
+}
+
+/**
+ * @brief Configures the camera contrast and brightness.
+ * @param contrast_level: Contrast level
+ * This parameter can be one of the following values:
+ * @arg CAMERA_CONTRAST_LEVEL4: for contrast +2
+ * @arg CAMERA_CONTRAST_LEVEL3: for contrast +1
+ * @arg CAMERA_CONTRAST_LEVEL2: for contrast 0
+ * @arg CAMERA_CONTRAST_LEVEL1: for contrast -1
+ * @arg CAMERA_CONTRAST_LEVEL0: for contrast -2
+ * @param brightness_level: Contrast level
+ * This parameter can be one of the following values:
+ * @arg CAMERA_BRIGHTNESS_LEVEL4: for brightness +2
+ * @arg CAMERA_BRIGHTNESS_LEVEL3: for brightness +1
+ * @arg CAMERA_BRIGHTNESS_LEVEL2: for brightness 0
+ * @arg CAMERA_BRIGHTNESS_LEVEL1: for brightness -1
+ * @arg CAMERA_BRIGHTNESS_LEVEL0: for brightness -2
+ * @retval None
+ */
+void BSP_CAMERA_ContrastBrightnessConfig(uint32_t contrast_level, uint32_t brightness_level)
+{
+ if(camera_drv->Config != NULL)
+ {
+ camera_drv->Config(CameraHwAddress, CAMERA_CONTRAST_BRIGHTNESS, contrast_level, brightness_level);
+ }
+}
+
+/**
+ * @brief Configures the camera white balance.
+ * @param Mode: black_white mode
+ * This parameter can be one of the following values:
+ * @arg CAMERA_BLACK_WHITE_BW
+ * @arg CAMERA_BLACK_WHITE_NEGATIVE
+ * @arg CAMERA_BLACK_WHITE_BW_NEGATIVE
+ * @arg CAMERA_BLACK_WHITE_NORMAL
+ * @retval None
+ */
+void BSP_CAMERA_BlackWhiteConfig(uint32_t Mode)
+{
+ if(camera_drv->Config != NULL)
+ {
+ camera_drv->Config(CameraHwAddress, CAMERA_BLACK_WHITE, Mode, 0);
+ }
+}
+
+/**
+ * @brief Configures the camera color effect.
+ * @param Effect: Color effect
+ * This parameter can be one of the following values:
+ * @arg CAMERA_COLOR_EFFECT_ANTIQUE
+ * @arg CAMERA_COLOR_EFFECT_BLUE
+ * @arg CAMERA_COLOR_EFFECT_GREEN
+ * @arg CAMERA_COLOR_EFFECT_RED
+ * @retval None
+ */
+void BSP_CAMERA_ColorEffectConfig(uint32_t Effect)
+{
+ if(camera_drv->Config != NULL)
+ {
+ camera_drv->Config(CameraHwAddress, CAMERA_COLOR_EFFECT, Effect, 0);
+ }
+}
+
+/**
+ * @brief Handles DCMI interrupt request.
+ * @retval None
+ */
+void BSP_CAMERA_IRQHandler(void)
+{
+ HAL_DCMI_IRQHandler(&hDcmiHandler);
+}
+
+/**
+ * @brief Handles DMA interrupt request.
+ * @retval None
+ */
+void BSP_CAMERA_DMA_IRQHandler(void)
+{
+ HAL_DMA_IRQHandler(hDcmiHandler.DMA_Handle);
+}
+
+/**
+ * @brief Get the capture size in pixels unit.
+ * @param resolution: the current resolution.
+ * @retval capture size in pixels unit.
+ */
+static uint32_t GetSize(uint32_t resolution)
+{
+ uint32_t size = 0;
+
+ /* Get capture size */
+ switch (resolution)
+ {
+ case CAMERA_R160x120:
+ {
+ size = 0x2580;
+ }
+ break;
+ case CAMERA_R320x240:
+ {
+ size = 0x9600;
+ }
+ break;
+ case CAMERA_R480x272:
+ {
+ size = 0xFF00;
+ }
+ break;
+ case CAMERA_R640x480:
+ {
+ size = 0x25800;
+ }
+ break;
+ default:
+ {
+ break;
+ }
+ }
+
+ return size;
+}
+
+/**
+ * @brief Initializes the DCMI MSP.
+ * @param hdcmi: HDMI handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_CAMERA_MspInit(DCMI_HandleTypeDef *hdcmi, void *Params)
+{
+ static DMA_HandleTypeDef hdma_handler;
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /*** Enable peripherals and GPIO clocks ***/
+ /* Enable DCMI clock */
+ __HAL_RCC_DCMI_CLK_ENABLE();
+
+ /* Enable DMA2 clock */
+ __HAL_RCC_DMA2_CLK_ENABLE();
+
+ /* Enable GPIO clocks */
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ __HAL_RCC_GPIOD_CLK_ENABLE();
+ __HAL_RCC_GPIOE_CLK_ENABLE();
+ __HAL_RCC_GPIOG_CLK_ENABLE();
+ __HAL_RCC_GPIOH_CLK_ENABLE();
+
+ /*** Configure the GPIO ***/
+ /* Configure DCMI GPIO as alternate function */
+ gpio_init_structure.Pin = GPIO_PIN_4 | GPIO_PIN_6;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = GPIO_AF13_DCMI;
+ HAL_GPIO_Init(GPIOA, &gpio_init_structure);
+
+ gpio_init_structure.Pin = GPIO_PIN_3;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = GPIO_AF13_DCMI;
+ HAL_GPIO_Init(GPIOD, &gpio_init_structure);
+
+ gpio_init_structure.Pin = GPIO_PIN_5 | GPIO_PIN_6;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = GPIO_AF13_DCMI;
+ HAL_GPIO_Init(GPIOE, &gpio_init_structure);
+
+ gpio_init_structure.Pin = GPIO_PIN_9;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = GPIO_AF13_DCMI;
+ HAL_GPIO_Init(GPIOG, &gpio_init_structure);
+
+ gpio_init_structure.Pin = GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 |\
+ GPIO_PIN_12 | GPIO_PIN_14;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = GPIO_AF13_DCMI;
+ HAL_GPIO_Init(GPIOH, &gpio_init_structure);
+
+ /*** Configure the DMA ***/
+ /* Set the parameters to be configured */
+ hdma_handler.Init.Channel = DMA_CHANNEL_1;
+ hdma_handler.Init.Direction = DMA_PERIPH_TO_MEMORY;
+ hdma_handler.Init.PeriphInc = DMA_PINC_DISABLE;
+ hdma_handler.Init.MemInc = DMA_MINC_ENABLE;
+ hdma_handler.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
+ hdma_handler.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
+ hdma_handler.Init.Mode = DMA_CIRCULAR;
+ hdma_handler.Init.Priority = DMA_PRIORITY_HIGH;
+ hdma_handler.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
+ hdma_handler.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
+ hdma_handler.Init.MemBurst = DMA_MBURST_SINGLE;
+ hdma_handler.Init.PeriphBurst = DMA_PBURST_SINGLE;
+
+ hdma_handler.Instance = DMA2_Stream1;
+
+ /* Associate the initialized DMA handle to the DCMI handle */
+ __HAL_LINKDMA(hdcmi, DMA_Handle, hdma_handler);
+
+ /*** Configure the NVIC for DCMI and DMA ***/
+ /* NVIC configuration for DCMI transfer complete interrupt */
+ HAL_NVIC_SetPriority(DCMI_IRQn, 5, 0);
+ HAL_NVIC_EnableIRQ(DCMI_IRQn);
+
+ /* NVIC configuration for DMA2D transfer complete interrupt */
+ HAL_NVIC_SetPriority(DMA2_Stream1_IRQn, 5, 0);
+ HAL_NVIC_EnableIRQ(DMA2_Stream1_IRQn);
+
+ /* Configure the DMA stream */
+ HAL_DMA_Init(hdcmi->DMA_Handle);
+}
+
+
+/**
+ * @brief DeInitializes the DCMI MSP.
+ * @param hdcmi: HDMI handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_CAMERA_MspDeInit(DCMI_HandleTypeDef *hdcmi, void *Params)
+{
+ /* Disable NVIC for DCMI transfer complete interrupt */
+ HAL_NVIC_DisableIRQ(DCMI_IRQn);
+
+ /* Disable NVIC for DMA2 transfer complete interrupt */
+ HAL_NVIC_DisableIRQ(DMA2_Stream1_IRQn);
+
+ /* Configure the DMA stream */
+ HAL_DMA_DeInit(hdcmi->DMA_Handle);
+
+ /* Disable DCMI clock */
+ __HAL_RCC_DCMI_CLK_DISABLE();
+
+ /* GPIO pins clock and DMA clock can be shut down in the application
+ by surcharging this __weak function */
+}
+
+/**
+ * @brief Line event callback
+ * @param hdcmi: pointer to the DCMI handle
+ * @retval None
+ */
+void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ BSP_CAMERA_LineEventCallback();
+}
+
+/**
+ * @brief Line Event callback.
+ * @retval None
+ */
+__weak void BSP_CAMERA_LineEventCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_LineEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief VSYNC event callback
+ * @param hdcmi: pointer to the DCMI handle
+ * @retval None
+ */
+void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ BSP_CAMERA_VsyncEventCallback();
+}
+
+/**
+ * @brief VSYNC Event callback.
+ * @retval None
+ */
+__weak void BSP_CAMERA_VsyncEventCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_VsyncEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Frame event callback
+ * @param hdcmi: pointer to the DCMI handle
+ * @retval None
+ */
+void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ BSP_CAMERA_FrameEventCallback();
+}
+
+/**
+ * @brief Frame Event callback.
+ * @retval None
+ */
+__weak void BSP_CAMERA_FrameEventCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_FrameEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Error callback
+ * @param hdcmi: pointer to the DCMI handle
+ * @retval None
+ */
+void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ BSP_CAMERA_ErrorCallback();
+}
+
+/**
+ * @brief Error callback.
+ * @retval None
+ */
+__weak void BSP_CAMERA_ErrorCallback(void)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_camera.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,151 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_camera.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file contains the common defines and functions prototypes for
+ * the stm32746g_discovery_camera.c driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32746G_DISCOVERY_CAMERA_H
+#define __STM32746G_DISCOVERY_CAMERA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Include Camera component Driver */
+#include "ov9655.h"
+#include "stm32746g_discovery.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_CAMERA
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_CAMERA_Exported_Types STM32746G_DISCOVERY_CAMERA Exported Types
+ * @{
+ */
+
+/**
+ * @brief Camera State structures definition
+ */
+typedef enum
+{
+ CAMERA_OK = 0x00,
+ CAMERA_ERROR = 0x01,
+ CAMERA_TIMEOUT = 0x02,
+ CAMERA_NOT_DETECTED = 0x03,
+ CAMERA_NOT_SUPPORTED = 0x04
+
+} Camera_StatusTypeDef;
+
+#define RESOLUTION_R160x120 CAMERA_R160x120 /* QQVGA Resolution */
+#define RESOLUTION_R320x240 CAMERA_R320x240 /* QVGA Resolution */
+#define RESOLUTION_R480x272 CAMERA_R480x272 /* 480x272 Resolution */
+#define RESOLUTION_R640x480 CAMERA_R640x480 /* VGA Resolution */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_CAMERA_Exported_Constants STM32746G_DISCOVERY_CAMERA Exported Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_CAMERA_Exported_Functions
+ * @{
+ */
+uint8_t BSP_CAMERA_Init(uint32_t Resolution);
+uint8_t BSP_CAMERA_DeInit(void);
+void BSP_CAMERA_ContinuousStart(uint8_t *buff);
+void BSP_CAMERA_SnapshotStart(uint8_t *buff);
+void BSP_CAMERA_Suspend(void);
+void BSP_CAMERA_Resume(void);
+uint8_t BSP_CAMERA_Stop(void);
+void BSP_CAMERA_PwrUp(void);
+void BSP_CAMERA_PwrDown(void);
+void BSP_CAMERA_LineEventCallback(void);
+void BSP_CAMERA_VsyncEventCallback(void);
+void BSP_CAMERA_FrameEventCallback(void);
+void BSP_CAMERA_ErrorCallback(void);
+
+/* Camera features functions prototype */
+void BSP_CAMERA_ContrastBrightnessConfig(uint32_t contrast_level, uint32_t brightness_level);
+void BSP_CAMERA_BlackWhiteConfig(uint32_t Mode);
+void BSP_CAMERA_ColorEffectConfig(uint32_t Effect);
+
+/* To be called in DCMI_IRQHandler function */
+void BSP_CAMERA_IRQHandler(void);
+/* To be called in DMA2_Stream1_IRQHandler function */
+void BSP_CAMERA_DMA_IRQHandler(void);
+
+/* These functions can be modified in case the current settings (e.g. DMA stream)
+ need to be changed for specific application needs */
+void BSP_CAMERA_MspInit(DCMI_HandleTypeDef *hdcmi, void *Params);
+void BSP_CAMERA_MspDeInit(DCMI_HandleTypeDef *hdcmi, void *Params);
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32746G_DISCOVERY_CAMERA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_eeprom.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,474 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_eeprom.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file provides a set of functions needed to manage an I2C M24LR64
+ * EEPROM memory.
+ @verbatim
+ To be able to use this driver, the switch EE_M24LR64 must be defined
+ in your toolchain compiler preprocessor
+
+ ===================================================================
+ Notes:
+ - The I2C EEPROM memory (M24LR64) is available on separate daughter
+ board ANT7-M24LR-A, which is not provided with the STM32746G_DISCOVERY
+ board.
+ To use this driver you have to connect the ANT7-M24LR-A to CN3
+ connector of STM32746G_DISCOVERY board.
+ ===================================================================
+
+ It implements a high level communication layer for read and write
+ from/to this memory. The needed STM32F7xx hardware resources (I2C and
+ GPIO) are defined in stm32746g_discovery.h file, and the initialization is
+ performed in EEPROM_IO_Init() function declared in stm32746g_discovery.c
+ file.
+ You can easily tailor this driver to any other development board,
+ by just adapting the defines for hardware resources and
+ EEPROM_IO_Init() function.
+
+ @note In this driver, basic read and write functions (BSP_EEPROM_ReadBuffer()
+ and BSP_EEPROM_WritePage()) use DMA mode to perform the data
+ transfer to/from EEPROM memory.
+
+ @note Regarding BSP_EEPROM_WritePage(), it is an optimized function to perform
+ small write (less than 1 page) BUT the number of bytes (combined to write start address) must not
+ cross the EEPROM page boundary. This function can only writes into
+ the boundaries of an EEPROM page.
+ This function doesn't check on boundaries condition (in this driver
+ the function BSP_EEPROM_WriteBuffer() which calls BSP_EEPROM_WritePage() is
+ responsible of checking on Page boundaries).
+
+
+ +-----------------------------------------------------------------+
+ | Pin assignment for M24LR64 EEPROM |
+ +---------------------------------------+-----------+-------------+
+ | STM32F7xx I2C Pins | EEPROM | Pin |
+ +---------------------------------------+-----------+-------------+
+ | . | E0(GND) | 1 (0V) |
+ | . | AC0 | 2 |
+ | . | AC1 | 3 |
+ | . | VSS | 4 (0V) |
+ | SDA | SDA | 5 |
+ | SCL | SCL | 6 |
+ | . | E1(GND) | 7 (0V) |
+ | . | VDD | 8 (3.3V) |
+ +---------------------------------------+-----------+-------------+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/* Includes ------------------------------------------------------------------*/
+#include "stm32746g_discovery_eeprom.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_EEPROM
+ * @brief This file includes the I2C EEPROM driver of STM32746G-Discovery board.
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_EEPROM_Private_Types STM32746G_DISCOVERY_EEPROM Private Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_EEPROM_Private_Defines STM32746G_DISCOVERY_EEPROM Private Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_EEPROM_Private_Macros STM32746G_DISCOVERY_EEPROM Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_EEPROM_Private_Variables STM32746G_DISCOVERY_EEPROM Private Variables
+ * @{
+ */
+__IO uint16_t EEPROMAddress = 0;
+__IO uint16_t EEPROMDataRead;
+__IO uint8_t EEPROMDataWrite;
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_EEPROM_Private_Function_Prototypes STM32746G_DISCOVERY_EEPROM Private Function Prototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_EEPROM_Exported_Functions STM32746G_DISCOVERY_EEPROM Exported Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes peripherals used by the I2C EEPROM driver.
+ *
+ * @note There are 2 different versions of M24LR64 (A01 & A02).
+ * Then try to connect on 1st one (EEPROM_I2C_ADDRESS_A01)
+ * and if problem, check the 2nd one (EEPROM_I2C_ADDRESS_A02)
+ * @retval EEPROM_OK (0) if operation is correctly performed, else return value
+ * different from EEPROM_OK (0)
+ */
+uint32_t BSP_EEPROM_Init(void)
+{
+ /* I2C Initialization */
+ EEPROM_IO_Init();
+
+ /* Select the EEPROM address for A01 and check if OK */
+ EEPROMAddress = EEPROM_I2C_ADDRESS_A01;
+ if(EEPROM_IO_IsDeviceReady(EEPROMAddress, EEPROM_MAX_TRIALS) != HAL_OK)
+ {
+ /* Select the EEPROM address for A02 and check if OK */
+ EEPROMAddress = EEPROM_I2C_ADDRESS_A02;
+ if(EEPROM_IO_IsDeviceReady(EEPROMAddress, EEPROM_MAX_TRIALS) != HAL_OK)
+ {
+ return EEPROM_FAIL;
+ }
+ }
+ return EEPROM_OK;
+}
+
+/**
+ * @brief DeInitializes the EEPROM.
+ * @retval EEPROM state
+ */
+uint8_t BSP_EEPROM_DeInit(void)
+{
+ /* I2C won't be disabled because common to other functionalities */
+ return EEPROM_OK;
+}
+
+/**
+ * @brief Reads a block of data from the EEPROM.
+ * @param pBuffer: pointer to the buffer that receives the data read from
+ * the EEPROM.
+ * @param ReadAddr: EEPROM's internal address to start reading from.
+ * @param NumByteToRead: pointer to the variable holding number of bytes to
+ * be read from the EEPROM.
+ *
+ * @note The variable pointed by NumByteToRead is reset to 0 when all the
+ * data are read from the EEPROM. Application should monitor this
+ * variable in order know when the transfer is complete.
+ *
+ * @retval EEPROM_OK (0) if operation is correctly performed, else return value
+ * different from EEPROM_OK (0) or the timeout user callback.
+ */
+uint32_t BSP_EEPROM_ReadBuffer(uint8_t* pBuffer, uint16_t ReadAddr, uint16_t* NumByteToRead)
+{
+ uint32_t buffersize = *NumByteToRead;
+
+ /* Set the pointer to the Number of data to be read. This pointer will be used
+ by the DMA Transfer Completer interrupt Handler in order to reset the
+ variable to 0. User should check on this variable in order to know if the
+ DMA transfer has been complete or not. */
+ EEPROMDataRead = *NumByteToRead;
+
+ if(EEPROM_IO_ReadData(EEPROMAddress, ReadAddr, pBuffer, buffersize) != HAL_OK)
+ {
+ BSP_EEPROM_TIMEOUT_UserCallback();
+ return EEPROM_FAIL;
+ }
+
+ /* If all operations OK, return EEPROM_OK (0) */
+ return EEPROM_OK;
+}
+
+/**
+ * @brief Writes more than one byte to the EEPROM with a single WRITE cycle.
+ *
+ * @note The number of bytes (combined to write start address) must not
+ * cross the EEPROM page boundary. This function can only write into
+ * the boundaries of an EEPROM page.
+ * This function doesn't check on boundaries condition (in this driver
+ * the function BSP_EEPROM_WriteBuffer() which calls BSP_EEPROM_WritePage() is
+ * responsible of checking on Page boundaries).
+ *
+ * @param pBuffer: pointer to the buffer containing the data to be written to
+ * the EEPROM.
+ * @param WriteAddr: EEPROM's internal address to write to.
+ * @param NumByteToWrite: pointer to the variable holding number of bytes to
+ * be written into the EEPROM.
+ *
+ * @note The variable pointed by NumByteToWrite is reset to 0 when all the
+ * data are written to the EEPROM. Application should monitor this
+ * variable in order know when the transfer is complete.
+ *
+ * @note This function just configure the communication and enable the DMA
+ * channel to transfer data. Meanwhile, the user application may perform
+ * other tasks in parallel.
+ *
+ * @retval EEPROM_OK (0) if operation is correctly performed, else return value
+ * different from EEPROM_OK (0) or the timeout user callback.
+ */
+uint32_t BSP_EEPROM_WritePage(uint8_t* pBuffer, uint16_t WriteAddr, uint8_t* NumByteToWrite)
+{
+ uint32_t buffersize = *NumByteToWrite;
+ uint32_t status = EEPROM_OK;
+
+ /* Set the pointer to the Number of data to be written. This pointer will be used
+ by the DMA Transfer Completer interrupt Handler in order to reset the
+ variable to 0. User should check on this variable in order to know if the
+ DMA transfer has been complete or not. */
+ EEPROMDataWrite = *NumByteToWrite;
+
+ if(EEPROM_IO_WriteData(EEPROMAddress, WriteAddr, pBuffer, buffersize) != HAL_OK)
+ {
+ BSP_EEPROM_TIMEOUT_UserCallback();
+ status = EEPROM_FAIL;
+ }
+
+ if(BSP_EEPROM_WaitEepromStandbyState() != EEPROM_OK)
+ {
+ return EEPROM_FAIL;
+ }
+
+ /* If all operations OK, return EEPROM_OK (0) */
+ return status;
+}
+
+/**
+ * @brief Writes buffer of data to the I2C EEPROM.
+ * @param pBuffer: pointer to the buffer containing the data to be written
+ * to the EEPROM.
+ * @param WriteAddr: EEPROM's internal address to write to.
+ * @param NumByteToWrite: number of bytes to write to the EEPROM.
+ * @retval EEPROM_OK (0) if operation is correctly performed, else return value
+ * different from EEPROM_OK (0) or the timeout user callback.
+ */
+uint32_t BSP_EEPROM_WriteBuffer(uint8_t *pBuffer, uint16_t WriteAddr, uint16_t NumByteToWrite)
+{
+ uint16_t numofpage = 0, numofsingle = 0, count = 0;
+ uint16_t addr = 0;
+ uint8_t dataindex = 0;
+ uint32_t status = EEPROM_OK;
+
+ addr = WriteAddr % EEPROM_PAGESIZE;
+ count = EEPROM_PAGESIZE - addr;
+ numofpage = NumByteToWrite / EEPROM_PAGESIZE;
+ numofsingle = NumByteToWrite % EEPROM_PAGESIZE;
+
+ /* If WriteAddr is EEPROM_PAGESIZE aligned */
+ if(addr == 0)
+ {
+ /* If NumByteToWrite < EEPROM_PAGESIZE */
+ if(numofpage == 0)
+ {
+ /* Store the number of data to be written */
+ dataindex = numofsingle;
+ /* Start writing data */
+ status = BSP_EEPROM_WritePage(pBuffer, WriteAddr, (uint8_t*)(&dataindex));
+ if(status != EEPROM_OK)
+ {
+ return status;
+ }
+ }
+ /* If NumByteToWrite > EEPROM_PAGESIZE */
+ else
+ {
+ while(numofpage--)
+ {
+ /* Store the number of data to be written */
+ dataindex = EEPROM_PAGESIZE;
+ status = BSP_EEPROM_WritePage(pBuffer, WriteAddr, (uint8_t*)(&dataindex));
+ if(status != EEPROM_OK)
+ {
+ return status;
+ }
+
+ WriteAddr += EEPROM_PAGESIZE;
+ pBuffer += EEPROM_PAGESIZE;
+ }
+
+ if(numofsingle!=0)
+ {
+ /* Store the number of data to be written */
+ dataindex = numofsingle;
+ status = BSP_EEPROM_WritePage(pBuffer, WriteAddr, (uint8_t*)(&dataindex));
+ if(status != EEPROM_OK)
+ {
+ return status;
+ }
+ }
+ }
+ }
+ /* If WriteAddr is not EEPROM_PAGESIZE aligned */
+ else
+ {
+ /* If NumByteToWrite < EEPROM_PAGESIZE */
+ if(numofpage== 0)
+ {
+ /* If the number of data to be written is more than the remaining space
+ in the current page: */
+ if(NumByteToWrite > count)
+ {
+ /* Store the number of data to be written */
+ dataindex = count;
+ /* Write the data contained in same page */
+ status = BSP_EEPROM_WritePage(pBuffer, WriteAddr, (uint8_t*)(&dataindex));
+ if(status != EEPROM_OK)
+ {
+ return status;
+ }
+
+ /* Store the number of data to be written */
+ dataindex = (NumByteToWrite - count);
+ /* Write the remaining data in the following page */
+ status = BSP_EEPROM_WritePage((uint8_t*)(pBuffer + count), (WriteAddr + count), (uint8_t*)(&dataindex));
+ if(status != EEPROM_OK)
+ {
+ return status;
+ }
+ }
+ else
+ {
+ /* Store the number of data to be written */
+ dataindex = numofsingle;
+ status = BSP_EEPROM_WritePage(pBuffer, WriteAddr, (uint8_t*)(&dataindex));
+ if(status != EEPROM_OK)
+ {
+ return status;
+ }
+ }
+ }
+ /* If NumByteToWrite > EEPROM_PAGESIZE */
+ else
+ {
+ NumByteToWrite -= count;
+ numofpage = NumByteToWrite / EEPROM_PAGESIZE;
+ numofsingle = NumByteToWrite % EEPROM_PAGESIZE;
+
+ if(count != 0)
+ {
+ /* Store the number of data to be written */
+ dataindex = count;
+ status = BSP_EEPROM_WritePage(pBuffer, WriteAddr, (uint8_t*)(&dataindex));
+ if(status != EEPROM_OK)
+ {
+ return status;
+ }
+ WriteAddr += count;
+ pBuffer += count;
+ }
+
+ while(numofpage--)
+ {
+ /* Store the number of data to be written */
+ dataindex = EEPROM_PAGESIZE;
+ status = BSP_EEPROM_WritePage(pBuffer, WriteAddr, (uint8_t*)(&dataindex));
+ if(status != EEPROM_OK)
+ {
+ return status;
+ }
+ WriteAddr += EEPROM_PAGESIZE;
+ pBuffer += EEPROM_PAGESIZE;
+ }
+ if(numofsingle != 0)
+ {
+ /* Store the number of data to be written */
+ dataindex = numofsingle;
+ status = BSP_EEPROM_WritePage(pBuffer, WriteAddr, (uint8_t*)(&dataindex));
+ if(status != EEPROM_OK)
+ {
+ return status;
+ }
+ }
+ }
+ }
+
+ /* If all operations OK, return EEPROM_OK (0) */
+ return EEPROM_OK;
+}
+
+/**
+ * @brief Wait for EEPROM Standby state.
+ *
+ * @note This function allows to wait and check that EEPROM has finished the
+ * last operation. It is mostly used after Write operation: after receiving
+ * the buffer to be written, the EEPROM may need additional time to actually
+ * perform the write operation. During this time, it doesn't answer to
+ * I2C packets addressed to it. Once the write operation is complete
+ * the EEPROM responds to its address.
+ *
+ * @retval EEPROM_OK (0) if operation is correctly performed, else return value
+ * different from EEPROM_OK (0) or the timeout user callback.
+ */
+uint32_t BSP_EEPROM_WaitEepromStandbyState(void)
+{
+ /* Check if the maximum allowed number of trials has bee reached */
+ if(EEPROM_IO_IsDeviceReady(EEPROMAddress, EEPROM_MAX_TRIALS) != HAL_OK)
+ {
+ /* If the maximum number of trials has been reached, exit the function */
+ BSP_EEPROM_TIMEOUT_UserCallback();
+ return EEPROM_TIMEOUT;
+ }
+ return EEPROM_OK;
+}
+
+/**
+ * @brief Basic management of the timeout situation.
+ * @retval None
+ */
+__weak void BSP_EEPROM_TIMEOUT_UserCallback(void)
+{
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_eeprom.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,140 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_eeprom.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file contains all the functions prototypes for
+ * the stm32746g_discovery_eeprom.c firmware driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32746G_DISCOVERY_EEPROM_H
+#define __STM32746G_DISCOVERY_EEPROM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32746g_discovery.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_EEPROM
+ * @brief This file includes the I2C EEPROM driver of STM32746G-Discovery board.
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_EEPROM_Exported_Types STM32746G_DISCOVERY_EEPROM Exported Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_EEPROM_Exported_Constants STM32746G_DISCOVERY_EEPROM Exported Constants
+ * @{
+ */
+/* EEPROM hardware address and page size */
+#define EEPROM_PAGESIZE ((uint8_t)4)
+#define EEPROM_MAX_SIZE ((uint16_t)0x2000) /* 64Kbit */
+
+
+/* Maximum number of trials for EEPROM_WaitEepromStandbyState() function */
+#define EEPROM_MAX_TRIALS ((uint32_t)3000)
+
+#define EEPROM_OK ((uint32_t)0)
+#define EEPROM_FAIL ((uint32_t)1)
+#define EEPROM_TIMEOUT ((uint32_t)2)
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_EEPROM_Exported_Macros STM32746G_DISCOVERY_EEPROM Exported Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_EEPROM_Exported_Functions
+ * @{
+ */
+uint32_t BSP_EEPROM_Init(void);
+uint8_t BSP_EEPROM_DeInit(void);
+uint32_t BSP_EEPROM_ReadBuffer(uint8_t* pBuffer, uint16_t ReadAddr, uint16_t* NumByteToRead);
+uint32_t BSP_EEPROM_WritePage(uint8_t* pBuffer, uint16_t WriteAddr, uint8_t* NumByteToWrite);
+uint32_t BSP_EEPROM_WriteBuffer(uint8_t* pBuffer, uint16_t WriteAddr, uint16_t NumByteToWrite);
+uint32_t BSP_EEPROM_WaitEepromStandbyState(void);
+
+/* USER Callbacks: This function is declared as __weak in EEPROM driver and
+ should be implemented into user application.
+ BSP_EEPROM_TIMEOUT_UserCallback() function is called whenever a timeout condition
+ occurs during communication (waiting on an event that doesn't occur, bus
+ errors, busy devices ...). */
+void BSP_EEPROM_TIMEOUT_UserCallback(void);
+
+/* Link function for I2C EEPROM peripheral */
+void EEPROM_IO_Init(void);
+HAL_StatusTypeDef EEPROM_IO_WriteData(uint16_t DevAddress, uint16_t MemAddress, uint8_t *pBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef EEPROM_IO_ReadData(uint16_t DevAddress, uint16_t MemAddress, uint8_t *pBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef EEPROM_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32746G_DISCOVERY_EEPROM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_lcd.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,1597 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_lcd.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file includes the driver for Liquid Crystal Display (LCD) module
+ * mounted on STM32746G-Discovery board.
+ @verbatim
+ 1. How To use this driver:
+ --------------------------
+ - This driver is used to drive directly an LCD TFT using the LTDC controller.
+ - This driver uses timing and setting for RK043FN48H LCD.
+
+ 2. Driver description:
+ ---------------------
+ + Initialization steps:
+ o Initialize the LCD using the BSP_LCD_Init() function.
+ o Apply the Layer configuration using the BSP_LCD_LayerDefaultInit() function.
+ o Select the LCD layer to be used using the BSP_LCD_SelectLayer() function.
+ o Enable the LCD display using the BSP_LCD_DisplayOn() function.
+
+ + Options
+ o Configure and enable the color keying functionality using the
+ BSP_LCD_SetColorKeying() function.
+ o Modify in the fly the transparency and/or the frame buffer address
+ using the following functions:
+ - BSP_LCD_SetTransparency()
+ - BSP_LCD_SetLayerAddress()
+
+ + Display on LCD
+ o Clear the hole LCD using BSP_LCD_Clear() function or only one specified string
+ line using the BSP_LCD_ClearStringLine() function.
+ o Display a character on the specified line and column using the BSP_LCD_DisplayChar()
+ function or a complete string line using the BSP_LCD_DisplayStringAtLine() function.
+ o Display a string line on the specified position (x,y in pixel) and align mode
+ using the BSP_LCD_DisplayStringAtLine() function.
+ o Draw and fill a basic shapes (dot, line, rectangle, circle, ellipse, .. bitmap)
+ on LCD using the available set of functions.
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32746g_discovery_lcd.h"
+#include "fonts.h"
+/*
+#include "font24.c"
+#include "font20.c"
+#include "font16.c"
+#include "font12.c"
+#include "font8.c"
+*/
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_LCD
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LCD_Private_TypesDefinitions STM32746G_DISCOVERY_LCD Private Types Definitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LCD_Private_Defines STM32746G_DISCOVERY LCD Private Defines
+ * @{
+ */
+#define POLY_X(Z) ((int32_t)((Points + Z)->X))
+#define POLY_Y(Z) ((int32_t)((Points + Z)->Y))
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LCD_Private_Macros STM32746G_DISCOVERY_LCD Private Macros
+ * @{
+ */
+#define ABS(X) ((X) > 0 ? (X) : -(X))
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LCD_Private_Variables STM32746G_DISCOVERY_LCD Private Variables
+ * @{
+ */
+static LTDC_HandleTypeDef hLtdcHandler;
+static DMA2D_HandleTypeDef hDma2dHandler;
+
+/* Default LCD configuration with LCD Layer 1 */
+static uint32_t ActiveLayer = 0;
+static LCD_DrawPropTypeDef DrawProp[MAX_LAYER_NUMBER];
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LCD_Private_FunctionPrototypes STM32746G_DISCOVERY_LCD Private Function Prototypes
+ * @{
+ */
+static void DrawChar(uint16_t Xpos, uint16_t Ypos, const uint8_t *c);
+static void FillTriangle(uint16_t x1, uint16_t x2, uint16_t x3, uint16_t y1, uint16_t y2, uint16_t y3);
+static void LL_FillBuffer(uint32_t LayerIndex, void *pDst, uint32_t xSize, uint32_t ySize, uint32_t OffLine, uint32_t ColorIndex);
+static void LL_ConvertLineToARGB8888(void * pSrc, void *pDst, uint32_t xSize, uint32_t ColorMode);
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LCD_Exported_Functions STM32746G_DISCOVERY_LCD Exported Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes the LCD.
+ * @retval LCD state
+ */
+uint8_t BSP_LCD_Init(void)
+{
+ /* Select the used LCD */
+
+ /* The RK043FN48H LCD 480x272 is selected */
+ /* Timing Configuration */
+ hLtdcHandler.Init.HorizontalSync = (RK043FN48H_HSYNC - 1);
+ hLtdcHandler.Init.VerticalSync = (RK043FN48H_VSYNC - 1);
+ hLtdcHandler.Init.AccumulatedHBP = (RK043FN48H_HSYNC + RK043FN48H_HBP - 1);
+ hLtdcHandler.Init.AccumulatedVBP = (RK043FN48H_VSYNC + RK043FN48H_VBP - 1);
+ hLtdcHandler.Init.AccumulatedActiveH = (RK043FN48H_HEIGHT + RK043FN48H_VSYNC + RK043FN48H_VBP - 1);
+ hLtdcHandler.Init.AccumulatedActiveW = (RK043FN48H_WIDTH + RK043FN48H_HSYNC + RK043FN48H_HBP - 1);
+ hLtdcHandler.Init.TotalHeigh = (RK043FN48H_HEIGHT + RK043FN48H_VSYNC + RK043FN48H_VBP + RK043FN48H_VFP - 1);
+ hLtdcHandler.Init.TotalWidth = (RK043FN48H_WIDTH + RK043FN48H_HSYNC + RK043FN48H_HBP + RK043FN48H_HFP - 1);
+
+ /* LCD clock configuration */
+ BSP_LCD_ClockConfig(&hLtdcHandler, NULL);
+
+ /* Initialize the LCD pixel width and pixel height */
+ hLtdcHandler.LayerCfg->ImageWidth = RK043FN48H_WIDTH;
+ hLtdcHandler.LayerCfg->ImageHeight = RK043FN48H_HEIGHT;
+
+ /* Background value */
+ hLtdcHandler.Init.Backcolor.Blue = 0;
+ hLtdcHandler.Init.Backcolor.Green = 0;
+ hLtdcHandler.Init.Backcolor.Red = 0;
+
+ /* Polarity */
+ hLtdcHandler.Init.HSPolarity = LTDC_HSPOLARITY_AL;
+ hLtdcHandler.Init.VSPolarity = LTDC_VSPOLARITY_AL;
+ hLtdcHandler.Init.DEPolarity = LTDC_DEPOLARITY_AL;
+ hLtdcHandler.Init.PCPolarity = LTDC_PCPOLARITY_IPC;
+ hLtdcHandler.Instance = LTDC;
+
+ if(HAL_LTDC_GetState(&hLtdcHandler) == HAL_LTDC_STATE_RESET)
+ {
+ /* Initialize the LCD Msp: this __weak function can be rewritten by the application */
+ BSP_LCD_MspInit(&hLtdcHandler, NULL);
+ }
+ HAL_LTDC_Init(&hLtdcHandler);
+
+ /* Assert display enable LCD_DISP pin */
+ HAL_GPIO_WritePin(LCD_DISP_GPIO_PORT, LCD_DISP_PIN, GPIO_PIN_SET);
+
+ /* Assert backlight LCD_BL_CTRL pin */
+ HAL_GPIO_WritePin(LCD_BL_CTRL_GPIO_PORT, LCD_BL_CTRL_PIN, GPIO_PIN_SET);
+
+#if !defined(DATA_IN_ExtSDRAM)
+ /* Initialize the SDRAM */
+ BSP_SDRAM_Init();
+#endif
+
+ /* Initialize the font */
+ BSP_LCD_SetFont(&LCD_DEFAULT_FONT);
+
+ return LCD_OK;
+}
+
+/**
+ * @brief DeInitializes the LCD.
+ * @retval LCD state
+ */
+uint8_t BSP_LCD_DeInit(void)
+{
+ /* Initialize the hLtdcHandler Instance parameter */
+ hLtdcHandler.Instance = LTDC;
+
+ /* Disable LTDC block */
+ __HAL_LTDC_DISABLE(&hLtdcHandler);
+
+ /* DeInit the LTDC */
+ HAL_LTDC_DeInit(&hLtdcHandler);
+
+ /* DeInit the LTDC MSP : this __weak function can be rewritten by the application */
+ BSP_LCD_MspDeInit(&hLtdcHandler, NULL);
+
+ return LCD_OK;
+}
+
+/**
+ * @brief Gets the LCD X size.
+ * @retval Used LCD X size
+ */
+uint32_t BSP_LCD_GetXSize(void)
+{
+ return hLtdcHandler.LayerCfg[ActiveLayer].ImageWidth;
+}
+
+/**
+ * @brief Gets the LCD Y size.
+ * @retval Used LCD Y size
+ */
+uint32_t BSP_LCD_GetYSize(void)
+{
+ return hLtdcHandler.LayerCfg[ActiveLayer].ImageHeight;
+}
+
+/**
+ * @brief Set the LCD X size.
+ * @param imageWidthPixels : image width in pixels unit
+ * @retval None
+ */
+void BSP_LCD_SetXSize(uint32_t imageWidthPixels)
+{
+ hLtdcHandler.LayerCfg[ActiveLayer].ImageWidth = imageWidthPixels;
+}
+
+/**
+ * @brief Set the LCD Y size.
+ * @param imageHeightPixels : image height in lines unit
+ * @retval None
+ */
+void BSP_LCD_SetYSize(uint32_t imageHeightPixels)
+{
+ hLtdcHandler.LayerCfg[ActiveLayer].ImageHeight = imageHeightPixels;
+}
+
+/**
+ * @brief Initializes the LCD layer in ARGB8888 format (32 bits per pixel).
+ * @param LayerIndex: Layer foreground or background
+ * @param FB_Address: Layer frame buffer
+ * @retval None
+ */
+void BSP_LCD_LayerDefaultInit(uint16_t LayerIndex, uint32_t FB_Address)
+{
+ LCD_LayerCfgTypeDef layer_cfg;
+
+ /* Layer Init */
+ layer_cfg.WindowX0 = 0;
+ layer_cfg.WindowX1 = BSP_LCD_GetXSize();
+ layer_cfg.WindowY0 = 0;
+ layer_cfg.WindowY1 = BSP_LCD_GetYSize();
+ layer_cfg.PixelFormat = LTDC_PIXEL_FORMAT_ARGB8888;
+ layer_cfg.FBStartAdress = FB_Address;
+ layer_cfg.Alpha = 255;
+ layer_cfg.Alpha0 = 0;
+ layer_cfg.Backcolor.Blue = 0;
+ layer_cfg.Backcolor.Green = 0;
+ layer_cfg.Backcolor.Red = 0;
+ layer_cfg.BlendingFactor1 = LTDC_BLENDING_FACTOR1_PAxCA;
+ layer_cfg.BlendingFactor2 = LTDC_BLENDING_FACTOR2_PAxCA;
+ layer_cfg.ImageWidth = BSP_LCD_GetXSize();
+ layer_cfg.ImageHeight = BSP_LCD_GetYSize();
+
+ HAL_LTDC_ConfigLayer(&hLtdcHandler, &layer_cfg, LayerIndex);
+
+ DrawProp[LayerIndex].BackColor = LCD_COLOR_WHITE;
+ DrawProp[LayerIndex].pFont = &Font24;
+ DrawProp[LayerIndex].TextColor = LCD_COLOR_BLACK;
+}
+
+/**
+ * @brief Initializes the LCD layer in RGB565 format (16 bits per pixel).
+ * @param LayerIndex: Layer foreground or background
+ * @param FB_Address: Layer frame buffer
+ * @retval None
+ */
+void BSP_LCD_LayerRgb565Init(uint16_t LayerIndex, uint32_t FB_Address)
+{
+ LCD_LayerCfgTypeDef layer_cfg;
+
+ /* Layer Init */
+ layer_cfg.WindowX0 = 0;
+ layer_cfg.WindowX1 = BSP_LCD_GetXSize();
+ layer_cfg.WindowY0 = 0;
+ layer_cfg.WindowY1 = BSP_LCD_GetYSize();
+ layer_cfg.PixelFormat = LTDC_PIXEL_FORMAT_RGB565;
+ layer_cfg.FBStartAdress = FB_Address;
+ layer_cfg.Alpha = 255;
+ layer_cfg.Alpha0 = 0;
+ layer_cfg.Backcolor.Blue = 0;
+ layer_cfg.Backcolor.Green = 0;
+ layer_cfg.Backcolor.Red = 0;
+ layer_cfg.BlendingFactor1 = LTDC_BLENDING_FACTOR1_PAxCA;
+ layer_cfg.BlendingFactor2 = LTDC_BLENDING_FACTOR2_PAxCA;
+ layer_cfg.ImageWidth = BSP_LCD_GetXSize();
+ layer_cfg.ImageHeight = BSP_LCD_GetYSize();
+
+ HAL_LTDC_ConfigLayer(&hLtdcHandler, &layer_cfg, LayerIndex);
+
+ DrawProp[LayerIndex].BackColor = LCD_COLOR_WHITE;
+ DrawProp[LayerIndex].pFont = &Font24;
+ DrawProp[LayerIndex].TextColor = LCD_COLOR_BLACK;
+}
+
+/**
+ * @brief Selects the LCD Layer.
+ * @param LayerIndex: Layer foreground or background
+ * @retval None
+ */
+void BSP_LCD_SelectLayer(uint32_t LayerIndex)
+{
+ ActiveLayer = LayerIndex;
+}
+
+/**
+ * @brief Sets an LCD Layer visible
+ * @param LayerIndex: Visible Layer
+ * @param State: New state of the specified layer
+ * This parameter can be one of the following values:
+ * @arg ENABLE
+ * @arg DISABLE
+ * @retval None
+ */
+void BSP_LCD_SetLayerVisible(uint32_t LayerIndex, FunctionalState State)
+{
+ if(State == ENABLE)
+ {
+ __HAL_LTDC_LAYER_ENABLE(&hLtdcHandler, LayerIndex);
+ }
+ else
+ {
+ __HAL_LTDC_LAYER_DISABLE(&hLtdcHandler, LayerIndex);
+ }
+ __HAL_LTDC_RELOAD_CONFIG(&hLtdcHandler);
+}
+
+/**
+ * @brief Configures the transparency.
+ * @param LayerIndex: Layer foreground or background.
+ * @param Transparency: Transparency
+ * This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF
+ * @retval None
+ */
+void BSP_LCD_SetTransparency(uint32_t LayerIndex, uint8_t Transparency)
+{
+ HAL_LTDC_SetAlpha(&hLtdcHandler, Transparency, LayerIndex);
+}
+
+/**
+ * @brief Sets an LCD layer frame buffer address.
+ * @param LayerIndex: Layer foreground or background
+ * @param Address: New LCD frame buffer value
+ * @retval None
+ */
+void BSP_LCD_SetLayerAddress(uint32_t LayerIndex, uint32_t Address)
+{
+ HAL_LTDC_SetAddress(&hLtdcHandler, Address, LayerIndex);
+}
+
+/**
+ * @brief Sets display window.
+ * @param LayerIndex: Layer index
+ * @param Xpos: LCD X position
+ * @param Ypos: LCD Y position
+ * @param Width: LCD window width
+ * @param Height: LCD window height
+ * @retval None
+ */
+void BSP_LCD_SetLayerWindow(uint16_t LayerIndex, uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height)
+{
+ /* Reconfigure the layer size */
+ HAL_LTDC_SetWindowSize(&hLtdcHandler, Width, Height, LayerIndex);
+
+ /* Reconfigure the layer position */
+ HAL_LTDC_SetWindowPosition(&hLtdcHandler, Xpos, Ypos, LayerIndex);
+}
+
+/**
+ * @brief Configures and sets the color keying.
+ * @param LayerIndex: Layer foreground or background
+ * @param RGBValue: Color reference
+ * @retval None
+ */
+void BSP_LCD_SetColorKeying(uint32_t LayerIndex, uint32_t RGBValue)
+{
+ /* Configure and Enable the color Keying for LCD Layer */
+ HAL_LTDC_ConfigColorKeying(&hLtdcHandler, RGBValue, LayerIndex);
+ HAL_LTDC_EnableColorKeying(&hLtdcHandler, LayerIndex);
+}
+
+/**
+ * @brief Disables the color keying.
+ * @param LayerIndex: Layer foreground or background
+ * @retval None
+ */
+void BSP_LCD_ResetColorKeying(uint32_t LayerIndex)
+{
+ /* Disable the color Keying for LCD Layer */
+ HAL_LTDC_DisableColorKeying(&hLtdcHandler, LayerIndex);
+}
+
+/**
+ * @brief Sets the LCD text color.
+ * @param Color: Text color code ARGB(8-8-8-8)
+ * @retval None
+ */
+void BSP_LCD_SetTextColor(uint32_t Color)
+{
+ DrawProp[ActiveLayer].TextColor = Color;
+}
+
+/**
+ * @brief Gets the LCD text color.
+ * @retval Used text color.
+ */
+uint32_t BSP_LCD_GetTextColor(void)
+{
+ return DrawProp[ActiveLayer].TextColor;
+}
+
+/**
+ * @brief Sets the LCD background color.
+ * @param Color: Layer background color code ARGB(8-8-8-8)
+ * @retval None
+ */
+void BSP_LCD_SetBackColor(uint32_t Color)
+{
+ DrawProp[ActiveLayer].BackColor = Color;
+}
+
+/**
+ * @brief Gets the LCD background color.
+ * @retval Used background colour
+ */
+uint32_t BSP_LCD_GetBackColor(void)
+{
+ return DrawProp[ActiveLayer].BackColor;
+}
+
+/**
+ * @brief Sets the LCD text font.
+ * @param fonts: Layer font to be used
+ * @retval None
+ */
+void BSP_LCD_SetFont(sFONT *fonts)
+{
+ DrawProp[ActiveLayer].pFont = fonts;
+}
+
+/**
+ * @brief Gets the LCD text font.
+ * @retval Used layer font
+ */
+sFONT *BSP_LCD_GetFont(void)
+{
+ return DrawProp[ActiveLayer].pFont;
+}
+
+/**
+ * @brief Reads an LCD pixel.
+ * @param Xpos: X position
+ * @param Ypos: Y position
+ * @retval RGB pixel color
+ */
+uint32_t BSP_LCD_ReadPixel(uint16_t Xpos, uint16_t Ypos)
+{
+ uint32_t ret = 0;
+
+ if(hLtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_ARGB8888)
+ {
+ /* Read data value from SDRAM memory */
+ ret = *(__IO uint32_t*) (hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress + (2*(Ypos*BSP_LCD_GetXSize() + Xpos)));
+ }
+ else if(hLtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_RGB888)
+ {
+ /* Read data value from SDRAM memory */
+ ret = (*(__IO uint32_t*) (hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress + (2*(Ypos*BSP_LCD_GetXSize() + Xpos))) & 0x00FFFFFF);
+ }
+ else if((hLtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \
+ (hLtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \
+ (hLtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_AL88))
+ {
+ /* Read data value from SDRAM memory */
+ ret = *(__IO uint16_t*) (hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress + (2*(Ypos*BSP_LCD_GetXSize() + Xpos)));
+ }
+ else
+ {
+ /* Read data value from SDRAM memory */
+ ret = *(__IO uint8_t*) (hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress + (2*(Ypos*BSP_LCD_GetXSize() + Xpos)));
+ }
+
+ return ret;
+}
+
+/**
+ * @brief Clears the hole LCD.
+ * @param Color: Color of the background
+ * @retval None
+ */
+void BSP_LCD_Clear(uint32_t Color)
+{
+ /* Clear the LCD */
+ LL_FillBuffer(ActiveLayer, (uint32_t *)(hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress), BSP_LCD_GetXSize(), BSP_LCD_GetYSize(), 0, Color);
+}
+
+/**
+ * @brief Clears the selected line.
+ * @param Line: Line to be cleared
+ * @retval None
+ */
+void BSP_LCD_ClearStringLine(uint32_t Line)
+{
+ uint32_t color_backup = DrawProp[ActiveLayer].TextColor;
+ DrawProp[ActiveLayer].TextColor = DrawProp[ActiveLayer].BackColor;
+
+ /* Draw rectangle with background color */
+ BSP_LCD_FillRect(0, (Line * DrawProp[ActiveLayer].pFont->Height), BSP_LCD_GetXSize(), DrawProp[ActiveLayer].pFont->Height);
+
+ DrawProp[ActiveLayer].TextColor = color_backup;
+ BSP_LCD_SetTextColor(DrawProp[ActiveLayer].TextColor);
+}
+
+/**
+ * @brief Displays one character.
+ * @param Xpos: Start column address
+ * @param Ypos: Line where to display the character shape.
+ * @param Ascii: Character ascii code
+ * This parameter must be a number between Min_Data = 0x20 and Max_Data = 0x7E
+ * @retval None
+ */
+void BSP_LCD_DisplayChar(uint16_t Xpos, uint16_t Ypos, uint8_t Ascii)
+{
+ DrawChar(Xpos, Ypos, &DrawProp[ActiveLayer].pFont->table[(Ascii-' ') *\
+ DrawProp[ActiveLayer].pFont->Height * ((DrawProp[ActiveLayer].pFont->Width + 7) / 8)]);
+}
+
+/**
+ * @brief Displays characters on the LCD.
+ * @param Xpos: X position (in pixel)
+ * @param Ypos: Y position (in pixel)
+ * @param Text: Pointer to string to display on LCD
+ * @param Mode: Display mode
+ * This parameter can be one of the following values:
+ * @arg CENTER_MODE
+ * @arg RIGHT_MODE
+ * @arg LEFT_MODE
+ * @retval None
+ */
+void BSP_LCD_DisplayStringAt(uint16_t Xpos, uint16_t Ypos, uint8_t *Text, Text_AlignModeTypdef Mode)
+{
+ uint16_t ref_column = 1, i = 0;
+ uint32_t size = 0, xsize = 0;
+ uint8_t *ptr = Text;
+
+ /* Get the text size */
+ while (*ptr++) size ++ ;
+
+ /* Characters number per line */
+ xsize = (BSP_LCD_GetXSize()/DrawProp[ActiveLayer].pFont->Width);
+
+ switch (Mode)
+ {
+ case CENTER_MODE:
+ {
+ ref_column = Xpos + ((xsize - size)* DrawProp[ActiveLayer].pFont->Width) / 2;
+ break;
+ }
+ case LEFT_MODE:
+ {
+ ref_column = Xpos;
+ break;
+ }
+ case RIGHT_MODE:
+ {
+ ref_column = - Xpos + ((xsize - size)*DrawProp[ActiveLayer].pFont->Width);
+ break;
+ }
+ default:
+ {
+ ref_column = Xpos;
+ break;
+ }
+ }
+
+ /* Check that the Start column is located in the screen */
+ if ((ref_column < 1) || (ref_column >= 0x8000))
+ {
+ ref_column = 1;
+ }
+
+ /* Send the string character by character on LCD */
+ while ((*Text != 0) & (((BSP_LCD_GetXSize() - (i*DrawProp[ActiveLayer].pFont->Width)) & 0xFFFF) >= DrawProp[ActiveLayer].pFont->Width))
+ {
+ /* Display one character on LCD */
+ BSP_LCD_DisplayChar(ref_column, Ypos, *Text);
+ /* Decrement the column position by 16 */
+ ref_column += DrawProp[ActiveLayer].pFont->Width;
+ /* Point on the next character */
+ Text++;
+ i++;
+ }
+}
+
+/**
+ * @brief Displays a maximum of 60 characters on the LCD.
+ * @param Line: Line where to display the character shape
+ * @param ptr: Pointer to string to display on LCD
+ * @retval None
+ */
+void BSP_LCD_DisplayStringAtLine(uint16_t Line, uint8_t *ptr)
+{
+ BSP_LCD_DisplayStringAt(0, LINE(Line), ptr, LEFT_MODE);
+}
+
+/**
+ * @brief Draws an horizontal line.
+ * @param Xpos: X position
+ * @param Ypos: Y position
+ * @param Length: Line length
+ * @retval None
+ */
+void BSP_LCD_DrawHLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length)
+{
+ uint32_t Xaddress = 0;
+
+ /* Get the line address */
+ if(hLtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_RGB565)
+ { /* RGB565 format */
+ Xaddress = (hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress) + 2*(BSP_LCD_GetXSize()*Ypos + Xpos);
+ }
+ else
+ { /* ARGB8888 format */
+ Xaddress = (hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress) + 4*(BSP_LCD_GetXSize()*Ypos + Xpos);
+ }
+
+ /* Write line */
+ LL_FillBuffer(ActiveLayer, (uint32_t *)Xaddress, Length, 1, 0, DrawProp[ActiveLayer].TextColor);
+}
+
+/**
+ * @brief Draws a vertical line.
+ * @param Xpos: X position
+ * @param Ypos: Y position
+ * @param Length: Line length
+ * @retval None
+ */
+void BSP_LCD_DrawVLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length)
+{
+ uint32_t Xaddress = 0;
+
+ /* Get the line address */
+ if(hLtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_RGB565)
+ { /* RGB565 format */
+ Xaddress = (hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress) + 2*(BSP_LCD_GetXSize()*Ypos + Xpos);
+ }
+ else
+ { /* ARGB8888 format */
+ Xaddress = (hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress) + 4*(BSP_LCD_GetXSize()*Ypos + Xpos);
+ }
+
+ /* Write line */
+ LL_FillBuffer(ActiveLayer, (uint32_t *)Xaddress, 1, Length, (BSP_LCD_GetXSize() - 1), DrawProp[ActiveLayer].TextColor);
+}
+
+/**
+ * @brief Draws an uni-line (between two points).
+ * @param x1: Point 1 X position
+ * @param y1: Point 1 Y position
+ * @param x2: Point 2 X position
+ * @param y2: Point 2 Y position
+ * @retval None
+ */
+void BSP_LCD_DrawLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2)
+{
+ int16_t deltax = 0, deltay = 0, x = 0, y = 0, xinc1 = 0, xinc2 = 0,
+ yinc1 = 0, yinc2 = 0, den = 0, num = 0, num_add = 0, num_pixels = 0,
+ curpixel = 0;
+
+ deltax = ABS(x2 - x1); /* The difference between the x's */
+ deltay = ABS(y2 - y1); /* The difference between the y's */
+ x = x1; /* Start x off at the first pixel */
+ y = y1; /* Start y off at the first pixel */
+
+ if (x2 >= x1) /* The x-values are increasing */
+ {
+ xinc1 = 1;
+ xinc2 = 1;
+ }
+ else /* The x-values are decreasing */
+ {
+ xinc1 = -1;
+ xinc2 = -1;
+ }
+
+ if (y2 >= y1) /* The y-values are increasing */
+ {
+ yinc1 = 1;
+ yinc2 = 1;
+ }
+ else /* The y-values are decreasing */
+ {
+ yinc1 = -1;
+ yinc2 = -1;
+ }
+
+ if (deltax >= deltay) /* There is at least one x-value for every y-value */
+ {
+ xinc1 = 0; /* Don't change the x when numerator >= denominator */
+ yinc2 = 0; /* Don't change the y for every iteration */
+ den = deltax;
+ num = deltax / 2;
+ num_add = deltay;
+ num_pixels = deltax; /* There are more x-values than y-values */
+ }
+ else /* There is at least one y-value for every x-value */
+ {
+ xinc2 = 0; /* Don't change the x for every iteration */
+ yinc1 = 0; /* Don't change the y when numerator >= denominator */
+ den = deltay;
+ num = deltay / 2;
+ num_add = deltax;
+ num_pixels = deltay; /* There are more y-values than x-values */
+ }
+
+ for (curpixel = 0; curpixel <= num_pixels; curpixel++)
+ {
+ BSP_LCD_DrawPixel(x, y, DrawProp[ActiveLayer].TextColor); /* Draw the current pixel */
+ num += num_add; /* Increase the numerator by the top of the fraction */
+ if (num >= den) /* Check if numerator >= denominator */
+ {
+ num -= den; /* Calculate the new numerator value */
+ x += xinc1; /* Change the x as appropriate */
+ y += yinc1; /* Change the y as appropriate */
+ }
+ x += xinc2; /* Change the x as appropriate */
+ y += yinc2; /* Change the y as appropriate */
+ }
+}
+
+/**
+ * @brief Draws a rectangle.
+ * @param Xpos: X position
+ * @param Ypos: Y position
+ * @param Width: Rectangle width
+ * @param Height: Rectangle height
+ * @retval None
+ */
+void BSP_LCD_DrawRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height)
+{
+ /* Draw horizontal lines */
+ BSP_LCD_DrawHLine(Xpos, Ypos, Width);
+ BSP_LCD_DrawHLine(Xpos, (Ypos+ Height), Width);
+
+ /* Draw vertical lines */
+ BSP_LCD_DrawVLine(Xpos, Ypos, Height);
+ BSP_LCD_DrawVLine((Xpos + Width), Ypos, Height);
+}
+
+/**
+ * @brief Draws a circle.
+ * @param Xpos: X position
+ * @param Ypos: Y position
+ * @param Radius: Circle radius
+ * @retval None
+ */
+void BSP_LCD_DrawCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius)
+{
+ int32_t decision; /* Decision Variable */
+ uint32_t current_x; /* Current X Value */
+ uint32_t current_y; /* Current Y Value */
+
+ decision = 3 - (Radius << 1);
+ current_x = 0;
+ current_y = Radius;
+
+ while (current_x <= current_y)
+ {
+ BSP_LCD_DrawPixel((Xpos + current_x), (Ypos - current_y), DrawProp[ActiveLayer].TextColor);
+
+ BSP_LCD_DrawPixel((Xpos - current_x), (Ypos - current_y), DrawProp[ActiveLayer].TextColor);
+
+ BSP_LCD_DrawPixel((Xpos + current_y), (Ypos - current_x), DrawProp[ActiveLayer].TextColor);
+
+ BSP_LCD_DrawPixel((Xpos - current_y), (Ypos - current_x), DrawProp[ActiveLayer].TextColor);
+
+ BSP_LCD_DrawPixel((Xpos + current_x), (Ypos + current_y), DrawProp[ActiveLayer].TextColor);
+
+ BSP_LCD_DrawPixel((Xpos - current_x), (Ypos + current_y), DrawProp[ActiveLayer].TextColor);
+
+ BSP_LCD_DrawPixel((Xpos + current_y), (Ypos + current_x), DrawProp[ActiveLayer].TextColor);
+
+ BSP_LCD_DrawPixel((Xpos - current_y), (Ypos + current_x), DrawProp[ActiveLayer].TextColor);
+
+ if (decision < 0)
+ {
+ decision += (current_x << 2) + 6;
+ }
+ else
+ {
+ decision += ((current_x - current_y) << 2) + 10;
+ current_y--;
+ }
+ current_x++;
+ }
+}
+
+/**
+ * @brief Draws an poly-line (between many points).
+ * @param Points: Pointer to the points array
+ * @param PointCount: Number of points
+ * @retval None
+ */
+void BSP_LCD_DrawPolygon(pPoint Points, uint16_t PointCount)
+{
+ int16_t x = 0, y = 0;
+
+ if(PointCount < 2)
+ {
+ return;
+ }
+
+ BSP_LCD_DrawLine(Points->X, Points->Y, (Points+PointCount-1)->X, (Points+PointCount-1)->Y);
+
+ while(--PointCount)
+ {
+ x = Points->X;
+ y = Points->Y;
+ Points++;
+ BSP_LCD_DrawLine(x, y, Points->X, Points->Y);
+ }
+}
+
+/**
+ * @brief Draws an ellipse on LCD.
+ * @param Xpos: X position
+ * @param Ypos: Y position
+ * @param XRadius: Ellipse X radius
+ * @param YRadius: Ellipse Y radius
+ * @retval None
+ */
+void BSP_LCD_DrawEllipse(int Xpos, int Ypos, int XRadius, int YRadius)
+{
+ int x = 0, y = -YRadius, err = 2-2*XRadius, e2;
+ float k = 0, rad1 = 0, rad2 = 0;
+
+ rad1 = XRadius;
+ rad2 = YRadius;
+
+ k = (float)(rad2/rad1);
+
+ do {
+ BSP_LCD_DrawPixel((Xpos-(uint16_t)(x/k)), (Ypos+y), DrawProp[ActiveLayer].TextColor);
+ BSP_LCD_DrawPixel((Xpos+(uint16_t)(x/k)), (Ypos+y), DrawProp[ActiveLayer].TextColor);
+ BSP_LCD_DrawPixel((Xpos+(uint16_t)(x/k)), (Ypos-y), DrawProp[ActiveLayer].TextColor);
+ BSP_LCD_DrawPixel((Xpos-(uint16_t)(x/k)), (Ypos-y), DrawProp[ActiveLayer].TextColor);
+
+ e2 = err;
+ if (e2 <= x) {
+ err += ++x*2+1;
+ if (-y == x && e2 <= y) e2 = 0;
+ }
+ if (e2 > y) err += ++y*2+1;
+ }
+ while (y <= 0);
+}
+
+/**
+ * @brief Draws a pixel on LCD.
+ * @param Xpos: X position
+ * @param Ypos: Y position
+ * @param RGB_Code: Pixel color in ARGB mode (8-8-8-8)
+ * @retval None
+ */
+void BSP_LCD_DrawPixel(uint16_t Xpos, uint16_t Ypos, uint32_t RGB_Code)
+{
+ /* Write data value to all SDRAM memory */
+ if(hLtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_RGB565)
+ { /* RGB565 format */
+ *(__IO uint16_t*) (hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress + (2*(Ypos*BSP_LCD_GetXSize() + Xpos))) = (uint16_t)RGB_Code;
+ }
+ else
+ { /* ARGB8888 format */
+ *(__IO uint32_t*) (hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress + (4*(Ypos*BSP_LCD_GetXSize() + Xpos))) = RGB_Code;
+ }
+}
+
+/**
+ * @brief Draws a bitmap picture loaded in the internal Flash in ARGB888 format (32 bits per pixel).
+ * Use this function in non-multithreading systems to divide image loading into several operations
+ * @param Xpos: Bmp X position in the LCD
+ * @param Ypos: Bmp Y position in the LCD
+ * @param pbmp: Pointer to Bmp picture address in the internal Flash
+ * @param width: line width in pixels
+ * @param bit_pixel: color data bits per pixel
+ * @param addressOffset: line data address offset
+ * @retval None
+ */
+
+void BSP_LCD_DrawBitmapLine(uint32_t Xpos, uint32_t Ypos, uint32_t *pbmp, uint32_t width, uint32_t bit_pixel, uint32_t addressOffset){
+ uint32_t index = 0;
+ uint32_t address;
+ uint32_t input_color_mode = 0;
+
+ // Set the address
+ address = hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress + (((BSP_LCD_GetXSize()*Ypos) + Xpos)*(4));
+
+ // Get the layer pixel format
+ if ((bit_pixel/8) == 4)
+ {
+ input_color_mode = CM_ARGB8888;
+ }
+ else if ((bit_pixel/8) == 2)
+ {
+ input_color_mode = CM_RGB565;
+ }
+ else
+ {
+ input_color_mode = CM_RGB888;
+ }
+
+ pbmp += addressOffset;
+
+ //Pixel format conversion
+ LL_ConvertLineToARGB8888((uint32_t *)pbmp, (uint32_t *)address, width, input_color_mode);
+
+}
+
+/**
+ * @brief Draws a bitmap picture loaded in the internal Flash in ARGB888 format (32 bits per pixel).
+ * @param Xpos: Bmp X position in the LCD
+ * @param Ypos: Bmp Y position in the LCD
+ * @param pbmp: Pointer to Bmp picture address in the internal Flash
+ * @retval None
+ */
+
+void BSP_LCD_DrawBitmap(uint32_t Xpos, uint32_t Ypos, uint8_t *pbmp)
+{
+ uint32_t index = 0, width = 0, height = 0, bit_pixel = 0;
+ uint32_t address;
+ uint32_t input_color_mode = 0;
+ uint8_t debugtext[30];
+ uint8_t temp;
+
+ // Get bitmap data address offset
+ index = *(__IO uint16_t *) (pbmp + 10);
+ index |= (*(__IO uint16_t *) (pbmp + 12)) << 16;
+
+ // Read bitmap width
+ width = *(uint16_t *) (pbmp + 18);
+ width |= (*(uint16_t *) (pbmp + 20)) << 16;
+
+ // Read bitmap height
+ height = *(uint16_t *) (pbmp + 22);
+ height |= (*(uint16_t *) (pbmp + 24)) << 16;
+
+ // Read bit/pixel
+ bit_pixel = *(uint16_t *) (pbmp + 28);
+
+ // Set the address
+ address = hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress + (((BSP_LCD_GetXSize()*Ypos) + Xpos)*(4));
+
+ // Get the layer pixel format
+ if ((bit_pixel/8) == 4)
+ {
+ input_color_mode = CM_ARGB8888;
+ }
+ else if ((bit_pixel/8) == 2)
+ {
+ input_color_mode = CM_RGB565;
+ }
+ else
+ {
+ input_color_mode = CM_RGB888;
+ }
+
+ // Bypass the bitmap header
+ pbmp += (index + (width * (height - 1) * (bit_pixel/8)));
+
+ // Convert picture to ARGB8888 pixel format
+ for(index=0; index < height; index++)
+ {
+ //Pixel format conversion
+ LL_ConvertLineToARGB8888((uint32_t *)pbmp, (uint32_t *)address, width, input_color_mode);
+
+ // Increment the source and destination buffers
+ address+= (BSP_LCD_GetXSize()*4);
+ pbmp -= width*(bit_pixel/8);
+ }
+}
+
+/**
+ * @brief Draws a full rectangle.
+ * @param Xpos: X position
+ * @param Ypos: Y position
+ * @param Width: Rectangle width
+ * @param Height: Rectangle height
+ * @retval None
+ */
+void BSP_LCD_FillRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height)
+{
+ uint32_t x_address = 0;
+
+ /* Set the text color */
+ BSP_LCD_SetTextColor(DrawProp[ActiveLayer].TextColor);
+
+ /* Get the rectangle start address */
+ if(hLtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_RGB565)
+ { /* RGB565 format */
+ x_address = (hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress) + 2*(BSP_LCD_GetXSize()*Ypos + Xpos);
+ }
+ else
+ { /* ARGB8888 format */
+ x_address = (hLtdcHandler.LayerCfg[ActiveLayer].FBStartAdress) + 4*(BSP_LCD_GetXSize()*Ypos + Xpos);
+ }
+ /* Fill the rectangle */
+ LL_FillBuffer(ActiveLayer, (uint32_t *)x_address, Width, Height, (BSP_LCD_GetXSize() - Width), DrawProp[ActiveLayer].TextColor);
+}
+
+/**
+ * @brief Draws a full circle.
+ * @param Xpos: X position
+ * @param Ypos: Y position
+ * @param Radius: Circle radius
+ * @retval None
+ */
+void BSP_LCD_FillCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius)
+{
+ int32_t decision; /* Decision Variable */
+ uint32_t current_x; /* Current X Value */
+ uint32_t current_y; /* Current Y Value */
+
+ decision = 3 - (Radius << 1);
+
+ current_x = 0;
+ current_y = Radius;
+
+ BSP_LCD_SetTextColor(DrawProp[ActiveLayer].TextColor);
+
+ while (current_x <= current_y)
+ {
+ if(current_y > 0)
+ {
+ BSP_LCD_DrawHLine(Xpos - current_y, Ypos + current_x, 2*current_y);
+ BSP_LCD_DrawHLine(Xpos - current_y, Ypos - current_x, 2*current_y);
+ }
+
+ if(current_x > 0)
+ {
+ BSP_LCD_DrawHLine(Xpos - current_x, Ypos - current_y, 2*current_x);
+ BSP_LCD_DrawHLine(Xpos - current_x, Ypos + current_y, 2*current_x);
+ }
+ if (decision < 0)
+ {
+ decision += (current_x << 2) + 6;
+ }
+ else
+ {
+ decision += ((current_x - current_y) << 2) + 10;
+ current_y--;
+ }
+ current_x++;
+ }
+
+ BSP_LCD_SetTextColor(DrawProp[ActiveLayer].TextColor);
+ BSP_LCD_DrawCircle(Xpos, Ypos, Radius);
+}
+
+/**
+ * @brief Draws a full poly-line (between many points).
+ * @param Points: Pointer to the points array
+ * @param PointCount: Number of points
+ * @retval None
+ */
+void BSP_LCD_FillPolygon(pPoint Points, uint16_t PointCount)
+{
+ int16_t X = 0, Y = 0, X2 = 0, Y2 = 0, X_center = 0, Y_center = 0, X_first = 0, Y_first = 0, pixelX = 0, pixelY = 0, counter = 0;
+ uint16_t image_left = 0, image_right = 0, image_top = 0, image_bottom = 0;
+
+ image_left = image_right = Points->X;
+ image_top= image_bottom = Points->Y;
+
+ for(counter = 1; counter < PointCount; counter++)
+ {
+ pixelX = POLY_X(counter);
+ if(pixelX < image_left)
+ {
+ image_left = pixelX;
+ }
+ if(pixelX > image_right)
+ {
+ image_right = pixelX;
+ }
+
+ pixelY = POLY_Y(counter);
+ if(pixelY < image_top)
+ {
+ image_top = pixelY;
+ }
+ if(pixelY > image_bottom)
+ {
+ image_bottom = pixelY;
+ }
+ }
+
+ if(PointCount < 2)
+ {
+ return;
+ }
+
+ X_center = (image_left + image_right)/2;
+ Y_center = (image_bottom + image_top)/2;
+
+ X_first = Points->X;
+ Y_first = Points->Y;
+
+ while(--PointCount)
+ {
+ X = Points->X;
+ Y = Points->Y;
+ Points++;
+ X2 = Points->X;
+ Y2 = Points->Y;
+
+ FillTriangle(X, X2, X_center, Y, Y2, Y_center);
+ FillTriangle(X, X_center, X2, Y, Y_center, Y2);
+ FillTriangle(X_center, X2, X, Y_center, Y2, Y);
+ }
+
+ FillTriangle(X_first, X2, X_center, Y_first, Y2, Y_center);
+ FillTriangle(X_first, X_center, X2, Y_first, Y_center, Y2);
+ FillTriangle(X_center, X2, X_first, Y_center, Y2, Y_first);
+}
+
+/**
+ * @brief Draws a full ellipse.
+ * @param Xpos: X position
+ * @param Ypos: Y position
+ * @param XRadius: Ellipse X radius
+ * @param YRadius: Ellipse Y radius
+ * @retval None
+ */
+void BSP_LCD_FillEllipse(int Xpos, int Ypos, int XRadius, int YRadius)
+{
+ int x = 0, y = -YRadius, err = 2-2*XRadius, e2;
+ float k = 0, rad1 = 0, rad2 = 0;
+
+ rad1 = XRadius;
+ rad2 = YRadius;
+
+ k = (float)(rad2/rad1);
+
+ do
+ {
+ BSP_LCD_DrawHLine((Xpos-(uint16_t)(x/k)), (Ypos+y), (2*(uint16_t)(x/k) + 1));
+ BSP_LCD_DrawHLine((Xpos-(uint16_t)(x/k)), (Ypos-y), (2*(uint16_t)(x/k) + 1));
+
+ e2 = err;
+ if (e2 <= x)
+ {
+ err += ++x*2+1;
+ if (-y == x && e2 <= y) e2 = 0;
+ }
+ if (e2 > y) err += ++y*2+1;
+ }
+ while (y <= 0);
+}
+
+/**
+ * @brief Enables the display.
+ * @retval None
+ */
+void BSP_LCD_DisplayOn(void)
+{
+ /* Display On */
+ __HAL_LTDC_ENABLE(&hLtdcHandler);
+ HAL_GPIO_WritePin(LCD_DISP_GPIO_PORT, LCD_DISP_PIN, GPIO_PIN_SET); /* Assert LCD_DISP pin */
+ HAL_GPIO_WritePin(LCD_BL_CTRL_GPIO_PORT, LCD_BL_CTRL_PIN, GPIO_PIN_SET); /* Assert LCD_BL_CTRL pin */
+}
+
+/**
+ * @brief Disables the display.
+ * @retval None
+ */
+void BSP_LCD_DisplayOff(void)
+{
+ /* Display Off */
+ __HAL_LTDC_DISABLE(&hLtdcHandler);
+ HAL_GPIO_WritePin(LCD_DISP_GPIO_PORT, LCD_DISP_PIN, GPIO_PIN_RESET); /* De-assert LCD_DISP pin */
+ HAL_GPIO_WritePin(LCD_BL_CTRL_GPIO_PORT, LCD_BL_CTRL_PIN, GPIO_PIN_RESET);/* De-assert LCD_BL_CTRL pin */
+}
+
+/**
+ * @brief Initializes the LTDC MSP.
+ * @param hltdc: LTDC handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_LCD_MspInit(LTDC_HandleTypeDef *hltdc, void *Params)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* Enable the LTDC and DMA2D clocks */
+ __HAL_RCC_LTDC_CLK_ENABLE();
+ __HAL_RCC_DMA2D_CLK_ENABLE();
+
+ /* Enable GPIOs clock */
+ __HAL_RCC_GPIOE_CLK_ENABLE();
+ __HAL_RCC_GPIOG_CLK_ENABLE();
+ __HAL_RCC_GPIOI_CLK_ENABLE();
+ __HAL_RCC_GPIOJ_CLK_ENABLE();
+ __HAL_RCC_GPIOK_CLK_ENABLE();
+ LCD_DISP_GPIO_CLK_ENABLE();
+ LCD_BL_CTRL_GPIO_CLK_ENABLE();
+
+ /*** LTDC Pins configuration ***/
+ /* GPIOE configuration */
+ gpio_init_structure.Pin = GPIO_PIN_4;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_FAST;
+ gpio_init_structure.Alternate = GPIO_AF14_LTDC;
+ HAL_GPIO_Init(GPIOE, &gpio_init_structure);
+
+ /* GPIOG configuration */
+ gpio_init_structure.Pin = GPIO_PIN_12;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Alternate = GPIO_AF9_LTDC;
+ HAL_GPIO_Init(GPIOG, &gpio_init_structure);
+
+ /* GPIOI LTDC alternate configuration */
+ gpio_init_structure.Pin = GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | \
+ GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Alternate = GPIO_AF14_LTDC;
+ HAL_GPIO_Init(GPIOI, &gpio_init_structure);
+
+ /* GPIOJ configuration */
+ gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | \
+ GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7 | \
+ GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 | \
+ GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Alternate = GPIO_AF14_LTDC;
+ HAL_GPIO_Init(GPIOJ, &gpio_init_structure);
+
+ /* GPIOK configuration */
+ gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_4 | \
+ GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Alternate = GPIO_AF14_LTDC;
+ HAL_GPIO_Init(GPIOK, &gpio_init_structure);
+
+ /* LCD_DISP GPIO configuration */
+ gpio_init_structure.Pin = LCD_DISP_PIN; /* LCD_DISP pin has to be manually controlled */
+ gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
+ HAL_GPIO_Init(LCD_DISP_GPIO_PORT, &gpio_init_structure);
+
+ /* LCD_BL_CTRL GPIO configuration */
+ gpio_init_structure.Pin = LCD_BL_CTRL_PIN; /* LCD_BL_CTRL pin has to be manually controlled */
+ gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
+ HAL_GPIO_Init(LCD_BL_CTRL_GPIO_PORT, &gpio_init_structure);
+}
+
+/**
+ * @brief DeInitializes BSP_LCD MSP.
+ * @param hltdc: LTDC handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_LCD_MspDeInit(LTDC_HandleTypeDef *hltdc, void *Params)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* Disable LTDC block */
+ __HAL_LTDC_DISABLE(hltdc);
+
+ /* LTDC Pins deactivation */
+
+ /* GPIOE deactivation */
+ gpio_init_structure.Pin = GPIO_PIN_4;
+ HAL_GPIO_DeInit(GPIOE, gpio_init_structure.Pin);
+
+ /* GPIOG deactivation */
+ gpio_init_structure.Pin = GPIO_PIN_12;
+ HAL_GPIO_DeInit(GPIOG, gpio_init_structure.Pin);
+
+ /* GPIOI deactivation */
+ gpio_init_structure.Pin = GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_12 | \
+ GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15;
+ HAL_GPIO_DeInit(GPIOI, gpio_init_structure.Pin);
+
+ /* GPIOJ deactivation */
+ gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | \
+ GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7 | \
+ GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 | \
+ GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15;
+ HAL_GPIO_DeInit(GPIOJ, gpio_init_structure.Pin);
+
+ /* GPIOK deactivation */
+ gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_4 | \
+ GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7;
+ HAL_GPIO_DeInit(GPIOK, gpio_init_structure.Pin);
+
+ /* Disable LTDC clock */
+ __HAL_RCC_LTDC_CLK_DISABLE();
+
+ /* GPIO pins clock can be shut down in the application
+ by surcharging this __weak function */
+}
+
+/**
+ * @brief Clock Config.
+ * @param hltdc: LTDC handle
+ * @param Params
+ * @note This API is called by BSP_LCD_Init()
+ * Being __weak it can be overwritten by the application
+ * @retval None
+ */
+__weak void BSP_LCD_ClockConfig(LTDC_HandleTypeDef *hltdc, void *Params)
+{
+ static RCC_PeriphCLKInitTypeDef periph_clk_init_struct;
+
+ /* RK043FN48H LCD clock configuration */
+ /* PLLSAI_VCO Input = HSE_VALUE/PLL_M = 1 Mhz */
+ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN = 192 Mhz */
+ /* PLLLCDCLK = PLLSAI_VCO Output/PLLSAIR = 192/5 = 38.4 Mhz */
+ /* LTDC clock frequency = PLLLCDCLK / LTDC_PLLSAI_DIVR_4 = 38.4/4 = 9.6Mhz */
+ periph_clk_init_struct.PeriphClockSelection = RCC_PERIPHCLK_LTDC;
+ periph_clk_init_struct.PLLSAI.PLLSAIN = 192;
+ periph_clk_init_struct.PLLSAI.PLLSAIR = RK043FN48H_FREQUENCY_DIVIDER;
+ periph_clk_init_struct.PLLSAIDivR = RCC_PLLSAIDIVR_4;
+ HAL_RCCEx_PeriphCLKConfig(&periph_clk_init_struct);
+}
+
+
+/*******************************************************************************
+ Static Functions
+*******************************************************************************/
+
+/**
+ * @brief Draws a character on LCD.
+ * @param Xpos: Line where to display the character shape
+ * @param Ypos: Start column address
+ * @param c: Pointer to the character data
+ * @retval None
+ */
+static void DrawChar(uint16_t Xpos, uint16_t Ypos, const uint8_t *c)
+{
+ uint32_t i = 0, j = 0;
+ uint16_t height, width;
+ uint8_t offset;
+ uint8_t *pchar;
+ uint32_t line;
+
+ height = DrawProp[ActiveLayer].pFont->Height;
+ width = DrawProp[ActiveLayer].pFont->Width;
+
+ offset = 8 *((width + 7)/8) - width ;
+
+ for(i = 0; i < height; i++)
+ {
+ pchar = ((uint8_t *)c + (width + 7)/8 * i);
+
+ switch(((width + 7)/8))
+ {
+
+ case 1:
+ line = pchar[0];
+ break;
+
+ case 2:
+ line = (pchar[0]<< 8) | pchar[1];
+ break;
+
+ case 3:
+ default:
+ line = (pchar[0]<< 16) | (pchar[1]<< 8) | pchar[2];
+ break;
+ }
+
+ for (j = 0; j < width; j++)
+ {
+ if(line & (1 << (width- j + offset- 1)))
+ {
+ BSP_LCD_DrawPixel((Xpos + j), Ypos, DrawProp[ActiveLayer].TextColor);
+ }
+ else
+ {
+ BSP_LCD_DrawPixel((Xpos + j), Ypos, DrawProp[ActiveLayer].BackColor);
+ }
+ }
+ Ypos++;
+ }
+}
+
+/**
+ * @brief Fills a triangle (between 3 points).
+ * @param x1: Point 1 X position
+ * @param y1: Point 1 Y position
+ * @param x2: Point 2 X position
+ * @param y2: Point 2 Y position
+ * @param x3: Point 3 X position
+ * @param y3: Point 3 Y position
+ * @retval None
+ */
+static void FillTriangle(uint16_t x1, uint16_t x2, uint16_t x3, uint16_t y1, uint16_t y2, uint16_t y3)
+{
+ int16_t deltax = 0, deltay = 0, x = 0, y = 0, xinc1 = 0, xinc2 = 0,
+ yinc1 = 0, yinc2 = 0, den = 0, num = 0, num_add = 0, num_pixels = 0,
+ curpixel = 0;
+
+ deltax = ABS(x2 - x1); /* The difference between the x's */
+ deltay = ABS(y2 - y1); /* The difference between the y's */
+ x = x1; /* Start x off at the first pixel */
+ y = y1; /* Start y off at the first pixel */
+
+ if (x2 >= x1) /* The x-values are increasing */
+ {
+ xinc1 = 1;
+ xinc2 = 1;
+ }
+ else /* The x-values are decreasing */
+ {
+ xinc1 = -1;
+ xinc2 = -1;
+ }
+
+ if (y2 >= y1) /* The y-values are increasing */
+ {
+ yinc1 = 1;
+ yinc2 = 1;
+ }
+ else /* The y-values are decreasing */
+ {
+ yinc1 = -1;
+ yinc2 = -1;
+ }
+
+ if (deltax >= deltay) /* There is at least one x-value for every y-value */
+ {
+ xinc1 = 0; /* Don't change the x when numerator >= denominator */
+ yinc2 = 0; /* Don't change the y for every iteration */
+ den = deltax;
+ num = deltax / 2;
+ num_add = deltay;
+ num_pixels = deltax; /* There are more x-values than y-values */
+ }
+ else /* There is at least one y-value for every x-value */
+ {
+ xinc2 = 0; /* Don't change the x for every iteration */
+ yinc1 = 0; /* Don't change the y when numerator >= denominator */
+ den = deltay;
+ num = deltay / 2;
+ num_add = deltax;
+ num_pixels = deltay; /* There are more y-values than x-values */
+ }
+
+ for (curpixel = 0; curpixel <= num_pixels; curpixel++)
+ {
+ BSP_LCD_DrawLine(x, y, x3, y3);
+
+ num += num_add; /* Increase the numerator by the top of the fraction */
+ if (num >= den) /* Check if numerator >= denominator */
+ {
+ num -= den; /* Calculate the new numerator value */
+ x += xinc1; /* Change the x as appropriate */
+ y += yinc1; /* Change the y as appropriate */
+ }
+ x += xinc2; /* Change the x as appropriate */
+ y += yinc2; /* Change the y as appropriate */
+ }
+}
+
+/**
+ * @brief Fills a buffer.
+ * @param LayerIndex: Layer index
+ * @param pDst: Pointer to destination buffer
+ * @param xSize: Buffer width
+ * @param ySize: Buffer height
+ * @param OffLine: Offset
+ * @param ColorIndex: Color index
+ * @retval None
+ */
+static void LL_FillBuffer(uint32_t LayerIndex, void *pDst, uint32_t xSize, uint32_t ySize, uint32_t OffLine, uint32_t ColorIndex)
+{
+ /* Register to memory mode with ARGB8888 as color Mode */
+ hDma2dHandler.Init.Mode = DMA2D_R2M;
+ if(hLtdcHandler.LayerCfg[ActiveLayer].PixelFormat == LTDC_PIXEL_FORMAT_RGB565)
+ { /* RGB565 format */
+ hDma2dHandler.Init.ColorMode = DMA2D_RGB565;
+ }
+ else
+ { /* ARGB8888 format */
+ hDma2dHandler.Init.ColorMode = DMA2D_ARGB8888;
+ }
+ hDma2dHandler.Init.OutputOffset = OffLine;
+
+ hDma2dHandler.Instance = DMA2D;
+
+ /* DMA2D Initialization */
+ if(HAL_DMA2D_Init(&hDma2dHandler) == HAL_OK)
+ {
+ if(HAL_DMA2D_ConfigLayer(&hDma2dHandler, LayerIndex) == HAL_OK)
+ {
+ if (HAL_DMA2D_Start(&hDma2dHandler, ColorIndex, (uint32_t)pDst, xSize, ySize) == HAL_OK)
+ {
+ /* Polling For DMA transfer */
+ HAL_DMA2D_PollForTransfer(&hDma2dHandler, 10);
+ }
+ }
+ }
+}
+
+/**
+ * @brief Converts a line to an ARGB8888 pixel format.
+ * @param pSrc: Pointer to source buffer
+ * @param pDst: Output color
+ * @param xSize: Buffer width
+ * @param ColorMode: Input color mode
+ * @retval None
+ */
+static void LL_ConvertLineToARGB8888(void *pSrc, void *pDst, uint32_t xSize, uint32_t ColorMode)
+{
+ /* Configure the DMA2D Mode, Color Mode and output offset */
+ hDma2dHandler.Init.Mode = DMA2D_M2M_PFC;
+ hDma2dHandler.Init.ColorMode = DMA2D_ARGB8888;
+ hDma2dHandler.Init.OutputOffset = 0;
+
+ /* Foreground Configuration */
+ hDma2dHandler.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
+ hDma2dHandler.LayerCfg[1].InputAlpha = 0xFF;
+ hDma2dHandler.LayerCfg[1].InputColorMode = ColorMode;
+ hDma2dHandler.LayerCfg[1].InputOffset = 0;
+
+ hDma2dHandler.Instance = DMA2D;
+
+ /* DMA2D Initialization */
+ if(HAL_DMA2D_Init(&hDma2dHandler) == HAL_OK)
+ {
+ if(HAL_DMA2D_ConfigLayer(&hDma2dHandler, 1) == HAL_OK)
+ {
+ if (HAL_DMA2D_Start(&hDma2dHandler, (uint32_t)pSrc, (uint32_t)pDst, xSize, 1) == HAL_OK)
+ {
+ /* Polling For DMA transfer */
+ HAL_DMA2D_PollForTransfer(&hDma2dHandler, 10);
+ }
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_lcd.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,257 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_lcd.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file contains the common defines and functions prototypes for
+ * the stm32746g_discovery_lcd.c driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32746G_DISCOVERY_LCD_H
+#define __STM32746G_DISCOVERY_LCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Include LCD component Driver */
+/* LCD RK043FN48H-CT672B 4,3" 480x272 pixels */
+#include "rk043fn48h.h"
+
+/* Include SDRAM Driver */
+#include "stm32746g_discovery_sdram.h"
+
+#include "stm32746g_discovery.h"
+#include "fonts.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_LCD
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LCD_Exported_Types STM32746G_DISCOVERY_LCD Exported Types
+ * @{
+ */
+typedef struct
+{
+ uint32_t TextColor;
+ uint32_t BackColor;
+ sFONT *pFont;
+}LCD_DrawPropTypeDef;
+
+typedef struct
+{
+ int16_t X;
+ int16_t Y;
+}Point, * pPoint;
+
+/**
+ * @brief Line mode structures definition
+ */
+typedef enum
+{
+ CENTER_MODE = 0x01, /* Center mode */
+ RIGHT_MODE = 0x02, /* Right mode */
+ LEFT_MODE = 0x03 /* Left mode */
+}Text_AlignModeTypdef;
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_LCD_Exported_Constants STM32746G_DISCOVERY_LCD Exported Constants
+ * @{
+ */
+#define MAX_LAYER_NUMBER ((uint32_t)2)
+
+#define LCD_LayerCfgTypeDef LTDC_LayerCfgTypeDef
+
+#define LTDC_ACTIVE_LAYER ((uint32_t)1) /* Layer 1 */
+/**
+ * @brief LCD status structure definition
+ */
+#define LCD_OK ((uint8_t)0x00)
+#define LCD_ERROR ((uint8_t)0x01)
+#define LCD_TIMEOUT ((uint8_t)0x02)
+
+/**
+ * @brief LCD FB_StartAddress
+ */
+#define LCD_FB_START_ADDRESS ((uint32_t)0xC0000000)
+
+/**
+ * @brief LCD color
+ */
+#define LCD_COLOR_BLUE ((uint32_t)0xFF0000FF)
+#define LCD_COLOR_GREEN ((uint32_t)0xFF00FF00)
+#define LCD_COLOR_RED ((uint32_t)0xFFFF0000)
+#define LCD_COLOR_CYAN ((uint32_t)0xFF00FFFF)
+#define LCD_COLOR_MAGENTA ((uint32_t)0xFFFF00FF)
+#define LCD_COLOR_YELLOW ((uint32_t)0xFFFFFF00)
+#define LCD_COLOR_LIGHTBLUE ((uint32_t)0xFF8080FF)
+#define LCD_COLOR_LIGHTGREEN ((uint32_t)0xFF80FF80)
+#define LCD_COLOR_LIGHTRED ((uint32_t)0xFFFF8080)
+#define LCD_COLOR_LIGHTCYAN ((uint32_t)0xFF80FFFF)
+#define LCD_COLOR_LIGHTMAGENTA ((uint32_t)0xFFFF80FF)
+#define LCD_COLOR_LIGHTYELLOW ((uint32_t)0xFFFFFF80)
+#define LCD_COLOR_DARKBLUE ((uint32_t)0xFF000080)
+#define LCD_COLOR_DARKGREEN ((uint32_t)0xFF008000)
+#define LCD_COLOR_DARKRED ((uint32_t)0xFF800000)
+#define LCD_COLOR_DARKCYAN ((uint32_t)0xFF008080)
+#define LCD_COLOR_DARKMAGENTA ((uint32_t)0xFF800080)
+#define LCD_COLOR_DARKYELLOW ((uint32_t)0xFF808000)
+#define LCD_COLOR_WHITE ((uint32_t)0xFFFFFFFF)
+#define LCD_COLOR_LIGHTGRAY ((uint32_t)0xFFD3D3D3)
+#define LCD_COLOR_GRAY ((uint32_t)0xFF808080)
+#define LCD_COLOR_DARKGRAY ((uint32_t)0xFF404040)
+#define LCD_COLOR_BLACK ((uint32_t)0xFF000000)
+#define LCD_COLOR_BROWN ((uint32_t)0xFFA52A2A)
+#define LCD_COLOR_ORANGE ((uint32_t)0xFFFFA500)
+#define LCD_COLOR_TRANSPARENT ((uint32_t)0xFF000000)
+
+/**
+ * @brief LCD default font
+ */
+#define LCD_DEFAULT_FONT Font12
+
+/**
+ * @brief LCD special pins
+ */
+/* Display enable pin */
+#define LCD_DISP_PIN GPIO_PIN_12
+#define LCD_DISP_GPIO_PORT GPIOI
+#define LCD_DISP_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE()
+#define LCD_DISP_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE()
+
+/* Backlight control pin */
+#define LCD_BL_CTRL_PIN GPIO_PIN_3
+#define LCD_BL_CTRL_GPIO_PORT GPIOK
+#define LCD_BL_CTRL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOK_CLK_ENABLE()
+#define LCD_BL_CTRL_GPIO_CLK_DISABLE() __HAL_RCC_GPIOK_CLK_DISABLE()
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_LCD_Exported_Functions
+ * @{
+ */
+uint8_t BSP_LCD_Init(void);
+uint8_t BSP_LCD_DeInit(void);
+uint32_t BSP_LCD_GetXSize(void);
+uint32_t BSP_LCD_GetYSize(void);
+void BSP_LCD_SetXSize(uint32_t imageWidthPixels);
+void BSP_LCD_SetYSize(uint32_t imageHeightPixels);
+
+/* Functions using the LTDC controller */
+void BSP_LCD_LayerDefaultInit(uint16_t LayerIndex, uint32_t FrameBuffer);
+void BSP_LCD_LayerRgb565Init(uint16_t LayerIndex, uint32_t FB_Address);
+void BSP_LCD_SetTransparency(uint32_t LayerIndex, uint8_t Transparency);
+void BSP_LCD_SetLayerAddress(uint32_t LayerIndex, uint32_t Address);
+void BSP_LCD_SetColorKeying(uint32_t LayerIndex, uint32_t RGBValue);
+void BSP_LCD_ResetColorKeying(uint32_t LayerIndex);
+void BSP_LCD_SetLayerWindow(uint16_t LayerIndex, uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height);
+
+void BSP_LCD_SelectLayer(uint32_t LayerIndex);
+void BSP_LCD_SetLayerVisible(uint32_t LayerIndex, FunctionalState State);
+
+void BSP_LCD_SetTextColor(uint32_t Color);
+uint32_t BSP_LCD_GetTextColor(void);
+void BSP_LCD_SetBackColor(uint32_t Color);
+uint32_t BSP_LCD_GetBackColor(void);
+void BSP_LCD_SetFont(sFONT *fonts);
+sFONT *BSP_LCD_GetFont(void);
+
+uint32_t BSP_LCD_ReadPixel(uint16_t Xpos, uint16_t Ypos);
+void BSP_LCD_DrawPixel(uint16_t Xpos, uint16_t Ypos, uint32_t pixel);
+void BSP_LCD_Clear(uint32_t Color);
+void BSP_LCD_ClearStringLine(uint32_t Line);
+void BSP_LCD_DisplayStringAtLine(uint16_t Line, uint8_t *ptr);
+void BSP_LCD_DisplayStringAt(uint16_t Xpos, uint16_t Ypos, uint8_t *Text, Text_AlignModeTypdef Mode);
+void BSP_LCD_DisplayChar(uint16_t Xpos, uint16_t Ypos, uint8_t Ascii);
+
+void BSP_LCD_DrawHLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length);
+void BSP_LCD_DrawVLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length);
+void BSP_LCD_DrawLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2);
+void BSP_LCD_DrawRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height);
+void BSP_LCD_DrawCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius);
+void BSP_LCD_DrawPolygon(pPoint Points, uint16_t PointCount);
+void BSP_LCD_DrawEllipse(int Xpos, int Ypos, int XRadius, int YRadius);
+void BSP_LCD_DrawBitmap(uint32_t Xpos, uint32_t Ypos, uint8_t *pbmp);
+void BSP_LCD_DrawBitmapLine(uint32_t Xpos, uint32_t Ypos, uint32_t *pbmp, uint32_t width, uint32_t bit_pixel, uint32_t addressOffset);
+
+void BSP_LCD_FillRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height);
+void BSP_LCD_FillCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius);
+void BSP_LCD_FillPolygon(pPoint Points, uint16_t PointCount);
+void BSP_LCD_FillEllipse(int Xpos, int Ypos, int XRadius, int YRadius);
+
+void BSP_LCD_DisplayOff(void);
+void BSP_LCD_DisplayOn(void);
+
+/* These functions can be modified in case the current settings
+ need to be changed for specific application needs */
+void BSP_LCD_MspInit(LTDC_HandleTypeDef *hltdc, void *Params);
+void BSP_LCD_MspDeInit(LTDC_HandleTypeDef *hltdc, void *Params);
+void BSP_LCD_ClockConfig(LTDC_HandleTypeDef *hltdc, void *Params);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32746G_DISCOVERY_LCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_qspi.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,792 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_qspi.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file includes a standard driver for the N25Q128A QSPI
+ * memory mounted on STM32746G-Discovery board.
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) This driver is used to drive the N25Q128A QSPI external
+ memory mounted on STM32746G-Discovery board.
+
+ (#) This driver need a specific component driver (N25Q128A) to be included with.
+
+ (#) Initialization steps:
+ (++) Initialize the QPSI external memory using the BSP_QSPI_Init() function. This
+ function includes the MSP layer hardware resources initialization and the
+ QSPI interface with the external memory.
+
+ (#) QSPI memory operations
+ (++) QSPI memory can be accessed with read/write operations once it is
+ initialized.
+ Read/write operation can be performed with AHB access using the functions
+ BSP_QSPI_Read()/BSP_QSPI_Write().
+ (++) The function BSP_QSPI_GetInfo() returns the configuration of the QSPI memory.
+ (see the QSPI memory data sheet)
+ (++) Perform erase block operation using the function BSP_QSPI_Erase_Block() and by
+ specifying the block address. You can perform an erase operation of the whole
+ chip by calling the function BSP_QSPI_Erase_Chip().
+ (++) The function BSP_QSPI_GetStatus() returns the current status of the QSPI memory.
+ (see the QSPI memory data sheet)
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32746g_discovery_qspi.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_QSPI STM32746G-Discovery QSPI
+ * @{
+ */
+
+
+/* Private variables ---------------------------------------------------------*/
+
+/** @defgroup STM32746G_DISCOVERY_QSPI_Private_Variables STM32746G_DISCOVERY QSPI Private Variables
+ * @{
+ */
+QSPI_HandleTypeDef QSPIHandle;
+
+/**
+ * @}
+ */
+
+
+
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup STM32746G_DISCOVERY_QSPI_Private_Functions STM32746G_DISCOVERY QSPI Private Functions
+ * @{
+ */
+static uint8_t QSPI_ResetMemory (QSPI_HandleTypeDef *hqspi);
+static uint8_t QSPI_DummyCyclesCfg (QSPI_HandleTypeDef *hqspi);
+static uint8_t QSPI_WriteEnable (QSPI_HandleTypeDef *hqspi);
+static uint8_t QSPI_AutoPollingMemReady (QSPI_HandleTypeDef *hqspi, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_QSPI_Exported_Functions STM32746G_DISCOVERY QSPI Exported Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes the QSPI interface.
+ * @retval QSPI memory status
+ */
+uint8_t BSP_QSPI_Init(void)
+{
+ QSPIHandle.Instance = QUADSPI;
+
+ /* Call the DeInit function to reset the driver */
+ if (HAL_QSPI_DeInit(&QSPIHandle) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* System level initialization */
+ BSP_QSPI_MspInit(&QSPIHandle, NULL);
+
+ /* QSPI initialization */
+ QSPIHandle.Init.ClockPrescaler = 1; /* QSPI freq = 216 MHz/(1+1) = 108 Mhz */
+ QSPIHandle.Init.FifoThreshold = 4;
+ QSPIHandle.Init.SampleShifting = QSPI_SAMPLE_SHIFTING_HALFCYCLE;
+ QSPIHandle.Init.FlashSize = POSITION_VAL(N25Q128A_FLASH_SIZE) - 1;
+ QSPIHandle.Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_2_CYCLE;
+ QSPIHandle.Init.ClockMode = QSPI_CLOCK_MODE_0;
+ QSPIHandle.Init.FlashID = QSPI_FLASH_ID_1;
+ QSPIHandle.Init.DualFlash = QSPI_DUALFLASH_DISABLE;
+
+ if (HAL_QSPI_Init(&QSPIHandle) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* QSPI memory reset */
+ if (QSPI_ResetMemory(&QSPIHandle) != QSPI_OK)
+ {
+ return QSPI_NOT_SUPPORTED;
+ }
+
+ /* Configuration of the dummy cycles on QSPI memory side */
+ if (QSPI_DummyCyclesCfg(&QSPIHandle) != QSPI_OK)
+ {
+ return QSPI_NOT_SUPPORTED;
+ }
+
+ return QSPI_OK;
+}
+
+/**
+ * @brief De-Initializes the QSPI interface.
+ * @retval QSPI memory status
+ */
+uint8_t BSP_QSPI_DeInit(void)
+{
+ QSPIHandle.Instance = QUADSPI;
+
+ /* Call the DeInit function to reset the driver */
+ if (HAL_QSPI_DeInit(&QSPIHandle) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* System level De-initialization */
+ BSP_QSPI_MspDeInit(&QSPIHandle, NULL);
+
+ return QSPI_OK;
+}
+
+/**
+ * @brief Reads an amount of data from the QSPI memory.
+ * @param pData: Pointer to data to be read
+ * @param ReadAddr: Read start address
+ * @param Size: Size of data to read
+ * @retval QSPI memory status
+ */
+uint8_t BSP_QSPI_Read(uint8_t* pData, uint32_t ReadAddr, uint32_t Size)
+{
+ QSPI_CommandTypeDef s_command;
+
+ /* Initialize the read command */
+ s_command.InstructionMode = QSPI_INSTRUCTION_1_LINE;
+ s_command.Instruction = QUAD_INOUT_FAST_READ_CMD;
+ s_command.AddressMode = QSPI_ADDRESS_4_LINES;
+ s_command.AddressSize = QSPI_ADDRESS_24_BITS;
+ s_command.Address = ReadAddr;
+ s_command.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
+ s_command.DataMode = QSPI_DATA_4_LINES;
+ s_command.DummyCycles = N25Q128A_DUMMY_CYCLES_READ_QUAD;
+ s_command.NbData = Size;
+ s_command.DdrMode = QSPI_DDR_MODE_DISABLE;
+ s_command.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
+ s_command.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
+
+ /* Configure the command */
+ if (HAL_QSPI_Command(&QSPIHandle, &s_command, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Reception of the data */
+ if (HAL_QSPI_Receive(&QSPIHandle, pData, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ return QSPI_OK;
+}
+
+/**
+ * @brief Writes an amount of data to the QSPI memory.
+ * @param pData: Pointer to data to be written
+ * @param WriteAddr: Write start address
+ * @param Size: Size of data to write
+ * @retval QSPI memory status
+ */
+uint8_t BSP_QSPI_Write(uint8_t* pData, uint32_t WriteAddr, uint32_t Size)
+{
+ QSPI_CommandTypeDef s_command;
+ uint32_t end_addr, current_size, current_addr;
+
+ /* Calculation of the size between the write address and the end of the page */
+ current_addr = 0;
+
+ while (current_addr <= WriteAddr)
+ {
+ current_addr += N25Q128A_PAGE_SIZE;
+ }
+ current_size = current_addr - WriteAddr;
+
+ /* Check if the size of the data is less than the remaining place in the page */
+ if (current_size > Size)
+ {
+ current_size = Size;
+ }
+
+ /* Initialize the adress variables */
+ current_addr = WriteAddr;
+ end_addr = WriteAddr + Size;
+
+ /* Initialize the program command */
+ s_command.InstructionMode = QSPI_INSTRUCTION_1_LINE;
+ s_command.Instruction = EXT_QUAD_IN_FAST_PROG_CMD;
+ s_command.AddressMode = QSPI_ADDRESS_4_LINES;
+ s_command.AddressSize = QSPI_ADDRESS_24_BITS;
+ s_command.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
+ s_command.DataMode = QSPI_DATA_4_LINES;
+ s_command.DummyCycles = 0;
+ s_command.DdrMode = QSPI_DDR_MODE_DISABLE;
+ s_command.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
+ s_command.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
+
+ /* Perform the write page by page */
+ do
+ {
+ s_command.Address = current_addr;
+ s_command.NbData = current_size;
+
+ /* Enable write operations */
+ if (QSPI_WriteEnable(&QSPIHandle) != QSPI_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Configure the command */
+ if (HAL_QSPI_Command(&QSPIHandle, &s_command, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Transmission of the data */
+ if (HAL_QSPI_Transmit(&QSPIHandle, pData, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Configure automatic polling mode to wait for end of program */
+ if (QSPI_AutoPollingMemReady(&QSPIHandle, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != QSPI_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Update the address and size variables for next page programming */
+ current_addr += current_size;
+ pData += current_size;
+ current_size = ((current_addr + N25Q128A_PAGE_SIZE) > end_addr) ? (end_addr - current_addr) : N25Q128A_PAGE_SIZE;
+ } while (current_addr < end_addr);
+
+ return QSPI_OK;
+}
+
+/**
+ * @brief Erases the specified block of the QSPI memory.
+ * @param BlockAddress: Block address to erase
+ * @retval QSPI memory status
+ */
+uint8_t BSP_QSPI_Erase_Block(uint32_t BlockAddress)
+{
+ QSPI_CommandTypeDef s_command;
+
+ /* Initialize the erase command */
+ s_command.InstructionMode = QSPI_INSTRUCTION_1_LINE;
+ s_command.Instruction = SUBSECTOR_ERASE_CMD;
+ s_command.AddressMode = QSPI_ADDRESS_1_LINE;
+ s_command.AddressSize = QSPI_ADDRESS_24_BITS;
+ s_command.Address = BlockAddress;
+ s_command.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
+ s_command.DataMode = QSPI_DATA_NONE;
+ s_command.DummyCycles = 0;
+ s_command.DdrMode = QSPI_DDR_MODE_DISABLE;
+ s_command.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
+ s_command.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
+
+ /* Enable write operations */
+ if (QSPI_WriteEnable(&QSPIHandle) != QSPI_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Send the command */
+ if (HAL_QSPI_Command(&QSPIHandle, &s_command, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Configure automatic polling mode to wait for end of erase */
+ if (QSPI_AutoPollingMemReady(&QSPIHandle, N25Q128A_SUBSECTOR_ERASE_MAX_TIME) != QSPI_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ return QSPI_OK;
+}
+
+/**
+ * @brief Erases the entire QSPI memory.
+ * @retval QSPI memory status
+ */
+uint8_t BSP_QSPI_Erase_Chip(void)
+{
+ QSPI_CommandTypeDef s_command;
+
+ /* Initialize the erase command */
+ s_command.InstructionMode = QSPI_INSTRUCTION_1_LINE;
+ s_command.Instruction = BULK_ERASE_CMD;
+ s_command.AddressMode = QSPI_ADDRESS_NONE;
+ s_command.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
+ s_command.DataMode = QSPI_DATA_NONE;
+ s_command.DummyCycles = 0;
+ s_command.DdrMode = QSPI_DDR_MODE_DISABLE;
+ s_command.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
+ s_command.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
+
+ /* Enable write operations */
+ if (QSPI_WriteEnable(&QSPIHandle) != QSPI_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Send the command */
+ if (HAL_QSPI_Command(&QSPIHandle, &s_command, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Configure automatic polling mode to wait for end of erase */
+ if (QSPI_AutoPollingMemReady(&QSPIHandle, N25Q128A_BULK_ERASE_MAX_TIME) != QSPI_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ return QSPI_OK;
+}
+
+/**
+ * @brief Reads current status of the QSPI memory.
+ * @retval QSPI memory status
+ */
+uint8_t BSP_QSPI_GetStatus(void)
+{
+ QSPI_CommandTypeDef s_command;
+ uint8_t reg;
+
+ /* Initialize the read flag status register command */
+ s_command.InstructionMode = QSPI_INSTRUCTION_1_LINE;
+ s_command.Instruction = READ_FLAG_STATUS_REG_CMD;
+ s_command.AddressMode = QSPI_ADDRESS_NONE;
+ s_command.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
+ s_command.DataMode = QSPI_DATA_1_LINE;
+ s_command.DummyCycles = 0;
+ s_command.NbData = 1;
+ s_command.DdrMode = QSPI_DDR_MODE_DISABLE;
+ s_command.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
+ s_command.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
+
+ /* Configure the command */
+ if (HAL_QSPI_Command(&QSPIHandle, &s_command, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Reception of the data */
+ if (HAL_QSPI_Receive(&QSPIHandle, ®, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Check the value of the register */
+ if ((reg & (N25Q128A_FSR_PRERR | N25Q128A_FSR_VPPERR | N25Q128A_FSR_PGERR | N25Q128A_FSR_ERERR)) != 0)
+ {
+ return QSPI_ERROR;
+ }
+ else if ((reg & (N25Q128A_FSR_PGSUS | N25Q128A_FSR_ERSUS)) != 0)
+ {
+ return QSPI_SUSPENDED;
+ }
+ else if ((reg & N25Q128A_FSR_READY) != 0)
+ {
+ return QSPI_OK;
+ }
+ else
+ {
+ return QSPI_BUSY;
+ }
+}
+
+/**
+ * @brief Return the configuration of the QSPI memory.
+ * @param pInfo: pointer on the configuration structure
+ * @retval QSPI memory status
+ */
+uint8_t BSP_QSPI_GetInfo(QSPI_Info* pInfo)
+{
+ /* Configure the structure with the memory configuration */
+ pInfo->FlashSize = N25Q128A_FLASH_SIZE;
+ pInfo->EraseSectorSize = N25Q128A_SUBSECTOR_SIZE;
+ pInfo->EraseSectorsNumber = (N25Q128A_FLASH_SIZE/N25Q128A_SUBSECTOR_SIZE);
+ pInfo->ProgPageSize = N25Q128A_PAGE_SIZE;
+ pInfo->ProgPagesNumber = (N25Q128A_FLASH_SIZE/N25Q128A_PAGE_SIZE);
+
+ return QSPI_OK;
+}
+
+/**
+ * @brief Configure the QSPI in memory-mapped mode
+ * @retval QSPI memory status
+ */
+uint8_t BSP_QSPI_MemoryMappedMode(void)
+{
+ QSPI_CommandTypeDef s_command;
+ QSPI_MemoryMappedTypeDef s_mem_mapped_cfg;
+
+ /* Configure the command for the read instruction */
+ s_command.InstructionMode = QSPI_INSTRUCTION_1_LINE;
+ s_command.Instruction = QUAD_INOUT_FAST_READ_CMD;
+ s_command.AddressMode = QSPI_ADDRESS_4_LINES;
+ s_command.AddressSize = QSPI_ADDRESS_24_BITS;
+ s_command.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
+ s_command.DataMode = QSPI_DATA_4_LINES;
+ s_command.DummyCycles = N25Q128A_DUMMY_CYCLES_READ_QUAD;
+ s_command.DdrMode = QSPI_DDR_MODE_DISABLE;
+ s_command.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
+ s_command.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
+
+ /* Configure the memory mapped mode */
+ s_mem_mapped_cfg.TimeOutActivation = QSPI_TIMEOUT_COUNTER_ENABLE;
+ s_mem_mapped_cfg.TimeOutPeriod = 1;
+
+ if (HAL_QSPI_MemoryMapped(&QSPIHandle, &s_command, &s_mem_mapped_cfg) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ return QSPI_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_QSPI_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief QSPI MSP Initialization
+ * This function configures the hardware resources used in this example:
+ * - Peripheral's clock enable
+ * - Peripheral's GPIO Configuration
+ * - NVIC configuration for QSPI interrupt
+ * @retval None
+ */
+__weak void BSP_QSPI_MspInit(QSPI_HandleTypeDef *hqspi, void *Params)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /*##-1- Enable peripherals and GPIO Clocks #################################*/
+ /* Enable the QuadSPI memory interface clock */
+ QSPI_CLK_ENABLE();
+ /* Reset the QuadSPI memory interface */
+ QSPI_FORCE_RESET();
+ QSPI_RELEASE_RESET();
+ /* Enable GPIO clocks */
+ QSPI_CS_GPIO_CLK_ENABLE();
+ QSPI_CLK_GPIO_CLK_ENABLE();
+ QSPI_D0_GPIO_CLK_ENABLE();
+ QSPI_D1_GPIO_CLK_ENABLE();
+ QSPI_D2_GPIO_CLK_ENABLE();
+ QSPI_D3_GPIO_CLK_ENABLE();
+
+ /*##-2- Configure peripheral GPIO ##########################################*/
+ /* QSPI CS GPIO pin configuration */
+ gpio_init_structure.Pin = QSPI_CS_PIN;
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = GPIO_AF10_QUADSPI;
+ HAL_GPIO_Init(QSPI_CS_GPIO_PORT, &gpio_init_structure);
+
+ /* QSPI CLK GPIO pin configuration */
+ gpio_init_structure.Pin = QSPI_CLK_PIN;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Alternate = GPIO_AF9_QUADSPI;
+ HAL_GPIO_Init(QSPI_CLK_GPIO_PORT, &gpio_init_structure);
+
+ /* QSPI D0 GPIO pin configuration */
+ gpio_init_structure.Pin = QSPI_D0_PIN;
+ gpio_init_structure.Alternate = GPIO_AF9_QUADSPI;
+ HAL_GPIO_Init(QSPI_D0_GPIO_PORT, &gpio_init_structure);
+
+ /* QSPI D1 GPIO pin configuration */
+ gpio_init_structure.Pin = QSPI_D1_PIN;
+ gpio_init_structure.Alternate = GPIO_AF9_QUADSPI;
+ HAL_GPIO_Init(QSPI_D1_GPIO_PORT, &gpio_init_structure);
+
+ /* QSPI D2 GPIO pin configuration */
+ gpio_init_structure.Pin = QSPI_D2_PIN;
+ gpio_init_structure.Alternate = GPIO_AF9_QUADSPI;
+ HAL_GPIO_Init(QSPI_D2_GPIO_PORT, &gpio_init_structure);
+
+ /* QSPI D3 GPIO pin configuration */
+ gpio_init_structure.Pin = QSPI_D3_PIN;
+ gpio_init_structure.Alternate = GPIO_AF9_QUADSPI;
+ HAL_GPIO_Init(QSPI_D3_GPIO_PORT, &gpio_init_structure);
+
+ /*##-3- Configure the NVIC for QSPI #########################################*/
+ /* NVIC configuration for QSPI interrupt */
+ HAL_NVIC_SetPriority(QUADSPI_IRQn, 0x0F, 0);
+ HAL_NVIC_EnableIRQ(QUADSPI_IRQn);
+}
+
+/**
+ * @brief QSPI MSP De-Initialization
+ * This function frees the hardware resources used in this example:
+ * - Disable the Peripheral's clock
+ * - Revert GPIO and NVIC configuration to their default state
+ * @retval None
+ */
+__weak void BSP_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi, void *Params)
+{
+ /*##-1- Disable the NVIC for QSPI ###########################################*/
+ HAL_NVIC_DisableIRQ(QUADSPI_IRQn);
+
+ /*##-2- Disable peripherals and GPIO Clocks ################################*/
+ /* De-Configure QSPI pins */
+ HAL_GPIO_DeInit(QSPI_CS_GPIO_PORT, QSPI_CS_PIN);
+ HAL_GPIO_DeInit(QSPI_CLK_GPIO_PORT, QSPI_CLK_PIN);
+ HAL_GPIO_DeInit(QSPI_D0_GPIO_PORT, QSPI_D0_PIN);
+ HAL_GPIO_DeInit(QSPI_D1_GPIO_PORT, QSPI_D1_PIN);
+ HAL_GPIO_DeInit(QSPI_D2_GPIO_PORT, QSPI_D2_PIN);
+ HAL_GPIO_DeInit(QSPI_D3_GPIO_PORT, QSPI_D3_PIN);
+
+ /*##-3- Reset peripherals ##################################################*/
+ /* Reset the QuadSPI memory interface */
+ QSPI_FORCE_RESET();
+ QSPI_RELEASE_RESET();
+
+ /* Disable the QuadSPI memory interface clock */
+ QSPI_CLK_DISABLE();
+}
+
+/**
+ * @brief This function reset the QSPI memory.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+static uint8_t QSPI_ResetMemory(QSPI_HandleTypeDef *hqspi)
+{
+ QSPI_CommandTypeDef s_command;
+
+ /* Initialize the reset enable command */
+ s_command.InstructionMode = QSPI_INSTRUCTION_1_LINE;
+ s_command.Instruction = RESET_ENABLE_CMD;
+ s_command.AddressMode = QSPI_ADDRESS_NONE;
+ s_command.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
+ s_command.DataMode = QSPI_DATA_NONE;
+ s_command.DummyCycles = 0;
+ s_command.DdrMode = QSPI_DDR_MODE_DISABLE;
+ s_command.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
+ s_command.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
+
+ /* Send the command */
+ if (HAL_QSPI_Command(hqspi, &s_command, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Send the reset memory command */
+ s_command.Instruction = RESET_MEMORY_CMD;
+ if (HAL_QSPI_Command(hqspi, &s_command, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Configure automatic polling mode to wait the memory is ready */
+ if (QSPI_AutoPollingMemReady(hqspi, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != QSPI_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ return QSPI_OK;
+}
+
+/**
+ * @brief This function configure the dummy cycles on memory side.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+static uint8_t QSPI_DummyCyclesCfg(QSPI_HandleTypeDef *hqspi)
+{
+ QSPI_CommandTypeDef s_command;
+ uint8_t reg;
+
+ /* Initialize the read volatile configuration register command */
+ s_command.InstructionMode = QSPI_INSTRUCTION_1_LINE;
+ s_command.Instruction = READ_VOL_CFG_REG_CMD;
+ s_command.AddressMode = QSPI_ADDRESS_NONE;
+ s_command.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
+ s_command.DataMode = QSPI_DATA_1_LINE;
+ s_command.DummyCycles = 0;
+ s_command.NbData = 1;
+ s_command.DdrMode = QSPI_DDR_MODE_DISABLE;
+ s_command.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
+ s_command.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
+
+ /* Configure the command */
+ if (HAL_QSPI_Command(hqspi, &s_command, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Reception of the data */
+ if (HAL_QSPI_Receive(hqspi, ®, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Enable write operations */
+ if (QSPI_WriteEnable(hqspi) != QSPI_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Update volatile configuration register (with new dummy cycles) */
+ s_command.Instruction = WRITE_VOL_CFG_REG_CMD;
+ MODIFY_REG(reg, N25Q128A_VCR_NB_DUMMY, (N25Q128A_DUMMY_CYCLES_READ_QUAD << POSITION_VAL(N25Q128A_VCR_NB_DUMMY)));
+
+ /* Configure the write volatile configuration register command */
+ if (HAL_QSPI_Command(hqspi, &s_command, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Transmission of the data */
+ if (HAL_QSPI_Transmit(hqspi, ®, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ return QSPI_OK;
+}
+
+/**
+ * @brief This function send a Write Enable and wait it is effective.
+ * @param hqspi: QSPI handle
+ * @retval None
+ */
+static uint8_t QSPI_WriteEnable(QSPI_HandleTypeDef *hqspi)
+{
+ QSPI_CommandTypeDef s_command;
+ QSPI_AutoPollingTypeDef s_config;
+
+ /* Enable write operations */
+ s_command.InstructionMode = QSPI_INSTRUCTION_1_LINE;
+ s_command.Instruction = WRITE_ENABLE_CMD;
+ s_command.AddressMode = QSPI_ADDRESS_NONE;
+ s_command.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
+ s_command.DataMode = QSPI_DATA_NONE;
+ s_command.DummyCycles = 0;
+ s_command.DdrMode = QSPI_DDR_MODE_DISABLE;
+ s_command.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
+ s_command.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
+
+ if (HAL_QSPI_Command(hqspi, &s_command, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ /* Configure automatic polling mode to wait for write enabling */
+ s_config.Match = N25Q128A_SR_WREN;
+ s_config.Mask = N25Q128A_SR_WREN;
+ s_config.MatchMode = QSPI_MATCH_MODE_AND;
+ s_config.StatusBytesSize = 1;
+ s_config.Interval = 0x10;
+ s_config.AutomaticStop = QSPI_AUTOMATIC_STOP_ENABLE;
+
+ s_command.Instruction = READ_STATUS_REG_CMD;
+ s_command.DataMode = QSPI_DATA_1_LINE;
+
+ if (HAL_QSPI_AutoPolling(hqspi, &s_command, &s_config, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ return QSPI_OK;
+}
+
+/**
+ * @brief This function read the SR of the memory and wait the EOP.
+ * @param hqspi: QSPI handle
+ * @param Timeout
+ * @retval None
+ */
+static uint8_t QSPI_AutoPollingMemReady(QSPI_HandleTypeDef *hqspi, uint32_t Timeout)
+{
+ QSPI_CommandTypeDef s_command;
+ QSPI_AutoPollingTypeDef s_config;
+
+ /* Configure automatic polling mode to wait for memory ready */
+ s_command.InstructionMode = QSPI_INSTRUCTION_1_LINE;
+ s_command.Instruction = READ_STATUS_REG_CMD;
+ s_command.AddressMode = QSPI_ADDRESS_NONE;
+ s_command.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
+ s_command.DataMode = QSPI_DATA_1_LINE;
+ s_command.DummyCycles = 0;
+ s_command.DdrMode = QSPI_DDR_MODE_DISABLE;
+ s_command.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
+ s_command.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
+
+ s_config.Match = 0;
+ s_config.Mask = N25Q128A_SR_WIP;
+ s_config.MatchMode = QSPI_MATCH_MODE_AND;
+ s_config.StatusBytesSize = 1;
+ s_config.Interval = 0x10;
+ s_config.AutomaticStop = QSPI_AUTOMATIC_STOP_ENABLE;
+
+ if (HAL_QSPI_AutoPolling(hqspi, &s_command, &s_config, Timeout) != HAL_OK)
+ {
+ return QSPI_ERROR;
+ }
+
+ return QSPI_OK;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_qspi.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,170 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_qspi.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file contains the common defines and functions prototypes for
+ * the stm32746g_discovery_qspi.c driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32746G_DISCOVERY_QSPI_H
+#define __STM32746G_DISCOVERY_QSPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+#include "n25q128a.h"
+
+/** @addtogroup STM32746G_DISCOVERY_QSPI
+ * @{
+ */
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup STM32746G_DISCOVERY_QSPI_Exported_Constants STM32746G_DISCOVERY_QSPI Exported Constants
+ * @{
+ */
+/* QSPI Error codes */
+#define QSPI_OK ((uint8_t)0x00)
+#define QSPI_ERROR ((uint8_t)0x01)
+#define QSPI_BUSY ((uint8_t)0x02)
+#define QSPI_NOT_SUPPORTED ((uint8_t)0x04)
+#define QSPI_SUSPENDED ((uint8_t)0x08)
+
+
+/* Definition for QSPI clock resources */
+#define QSPI_CLK_ENABLE() __HAL_RCC_QSPI_CLK_ENABLE()
+#define QSPI_CLK_DISABLE() __HAL_RCC_QSPI_CLK_DISABLE()
+#define QSPI_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
+#define QSPI_CLK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
+#define QSPI_D0_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
+#define QSPI_D1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
+#define QSPI_D2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
+#define QSPI_D3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
+
+#define QSPI_FORCE_RESET() __HAL_RCC_QSPI_FORCE_RESET()
+#define QSPI_RELEASE_RESET() __HAL_RCC_QSPI_RELEASE_RESET()
+
+/* Definition for QSPI Pins */
+#define QSPI_CS_PIN GPIO_PIN_6
+#define QSPI_CS_GPIO_PORT GPIOB
+#define QSPI_CLK_PIN GPIO_PIN_2
+#define QSPI_CLK_GPIO_PORT GPIOB
+#define QSPI_D0_PIN GPIO_PIN_11
+#define QSPI_D0_GPIO_PORT GPIOD
+#define QSPI_D1_PIN GPIO_PIN_12
+#define QSPI_D1_GPIO_PORT GPIOD
+#define QSPI_D2_PIN GPIO_PIN_2
+#define QSPI_D2_GPIO_PORT GPIOE
+#define QSPI_D3_PIN GPIO_PIN_13
+#define QSPI_D3_GPIO_PORT GPIOD
+
+/* N25Q128A13EF840E Micron memory */
+/* Size of the flash */
+#define QSPI_FLASH_SIZE 23 /* Address bus width to access whole memory space */
+#define QSPI_PAGE_SIZE 256
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup STM32746G_DISCOVERY_QSPI_Exported_Types STM32746G_DISCOVERY_QSPI Exported Types
+ * @{
+ */
+/* QSPI Info */
+typedef struct {
+ uint32_t FlashSize; /*!< Size of the flash */
+ uint32_t EraseSectorSize; /*!< Size of sectors for the erase operation */
+ uint32_t EraseSectorsNumber; /*!< Number of sectors for the erase operation */
+ uint32_t ProgPageSize; /*!< Size of pages for the program operation */
+ uint32_t ProgPagesNumber; /*!< Number of pages for the program operation */
+} QSPI_Info;
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup STM32746G_DISCOVERY_QSPI_Exported_Functions
+ * @{
+ */
+uint8_t BSP_QSPI_Init (void);
+uint8_t BSP_QSPI_DeInit (void);
+uint8_t BSP_QSPI_Read (uint8_t* pData, uint32_t ReadAddr, uint32_t Size);
+uint8_t BSP_QSPI_Write (uint8_t* pData, uint32_t WriteAddr, uint32_t Size);
+uint8_t BSP_QSPI_Erase_Block(uint32_t BlockAddress);
+uint8_t BSP_QSPI_Erase_Chip (void);
+uint8_t BSP_QSPI_GetStatus (void);
+uint8_t BSP_QSPI_GetInfo (QSPI_Info* pInfo);
+uint8_t BSP_QSPI_MemoryMappedMode(void);
+
+/* These functions can be modified in case the current settings
+ need to be changed for specific application needs */
+void BSP_QSPI_MspInit(QSPI_HandleTypeDef *hqspi, void *Params);
+void BSP_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi, void *Params);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32746G_DISCOVERY_QSPI_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_sd.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,596 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_sd.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file includes the uSD card driver mounted on STM32746G-Discovery
+ * board.
+ @verbatim
+ 1. How To use this driver:
+ --------------------------
+ - This driver is used to drive the micro SD external card mounted on STM32746G-Discovery
+ board.
+ - This driver does not need a specific component driver for the micro SD device
+ to be included with.
+
+ 2. Driver description:
+ ---------------------
+ + Initialization steps:
+ o Initialize the micro SD card using the BSP_SD_Init() function. This
+ function includes the MSP layer hardware resources initialization and the
+ SDIO interface configuration to interface with the external micro SD. It
+ also includes the micro SD initialization sequence.
+ o To check the SD card presence you can use the function BSP_SD_IsDetected() which
+ returns the detection status
+ o If SD presence detection interrupt mode is desired, you must configure the
+ SD detection interrupt mode by calling the function BSP_SD_ITConfig(). The interrupt
+ is generated as an external interrupt whenever the micro SD card is
+ plugged/unplugged in/from the board.
+ o The function BSP_SD_GetCardInfo() is used to get the micro SD card information
+ which is stored in the structure "HAL_SD_CardInfoTypedef".
+
+ + Micro SD card operations
+ o The micro SD card can be accessed with read/write block(s) operations once
+ it is ready for access. The access can be performed whether using the polling
+ mode by calling the functions BSP_SD_ReadBlocks()/BSP_SD_WriteBlocks(), or by DMA
+ transfer using the functions BSP_SD_ReadBlocks_DMA()/BSP_SD_WriteBlocks_DMA()
+ o The DMA transfer complete is used with interrupt mode. Once the SD transfer
+ is complete, the SD interrupt is handled using the function BSP_SD_IRQHandler(),
+ the DMA Tx/Rx transfer complete are handled using the functions
+ BSP_SD_DMA_Tx_IRQHandler()/BSP_SD_DMA_Rx_IRQHandler(). The corresponding user callbacks
+ are implemented by the user at application level.
+ o The SD erase block(s) is performed using the function BSP_SD_Erase() with specifying
+ the number of blocks to erase.
+ o The SD runtime status is returned when calling the function BSP_SD_GetStatus().
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32746g_discovery_sd.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SD STM32746G_DISCOVERY_SD
+ * @{
+ */
+
+
+/** @defgroup STM32746G_DISCOVERY_SD_Private_TypesDefinitions STM32746G_DISCOVERY_SD Private Types Definitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SD_Private_Defines STM32746G_DISCOVERY_SD Private Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SD_Private_Macros STM32746G_DISCOVERY_SD Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SD_Private_Variables STM32746G_DISCOVERY_SD Private Variables
+ * @{
+ */
+static SD_HandleTypeDef uSdHandle;
+static SD_CardInfo uSdCardInfo;
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SD_Private_FunctionPrototypes STM32746G_DISCOVERY_SD Private Function Prototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SD_Exported_Functions STM32746G_DISCOVERY_SD Exported Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes the SD card device.
+ * @retval SD status
+ */
+uint8_t BSP_SD_Init(void)
+{
+ uint8_t sd_state = MSD_OK;
+
+ /* uSD device interface configuration */
+ uSdHandle.Instance = SDMMC1;
+
+ uSdHandle.Init.ClockEdge = SDMMC_CLOCK_EDGE_RISING;
+ uSdHandle.Init.ClockBypass = SDMMC_CLOCK_BYPASS_DISABLE;
+ uSdHandle.Init.ClockPowerSave = SDMMC_CLOCK_POWER_SAVE_DISABLE;
+ uSdHandle.Init.BusWide = SDMMC_BUS_WIDE_1B;
+ uSdHandle.Init.HardwareFlowControl = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE;
+ uSdHandle.Init.ClockDiv = SDMMC_TRANSFER_CLK_DIV;
+
+ /* Msp SD Detect pin initialization */
+ BSP_SD_Detect_MspInit(&uSdHandle, NULL);
+ if(BSP_SD_IsDetected() != SD_PRESENT) /* Check if SD card is present */
+ {
+ return MSD_ERROR_SD_NOT_PRESENT;
+ }
+
+ /* Msp SD initialization */
+ BSP_SD_MspInit(&uSdHandle, NULL);
+
+ /* HAL SD initialization */
+ if(HAL_SD_Init(&uSdHandle, &uSdCardInfo) != SD_OK)
+ {
+ sd_state = MSD_ERROR;
+ }
+
+ /* Configure SD Bus width */
+ if(sd_state == MSD_OK)
+ {
+ /* Enable wide operation */
+ if(HAL_SD_WideBusOperation_Config(&uSdHandle, SDMMC_BUS_WIDE_4B) != SD_OK)
+ {
+ sd_state = MSD_ERROR;
+ }
+ else
+ {
+ sd_state = MSD_OK;
+ }
+ }
+
+ return sd_state;
+}
+
+/**
+ * @brief DeInitializes the SD card device.
+ * @retval SD status
+ */
+uint8_t BSP_SD_DeInit(void)
+{
+ uint8_t sd_state = MSD_OK;
+
+ uSdHandle.Instance = SDMMC1;
+
+ /* HAL SD deinitialization */
+ if(HAL_SD_DeInit(&uSdHandle) != HAL_OK)
+ {
+ sd_state = MSD_ERROR;
+ }
+
+ /* Msp SD deinitialization */
+ uSdHandle.Instance = SDMMC1;
+ BSP_SD_MspDeInit(&uSdHandle, NULL);
+
+ return sd_state;
+}
+
+/**
+ * @brief Configures Interrupt mode for SD detection pin.
+ * @retval Returns MSD_OK
+ */
+uint8_t BSP_SD_ITConfig(void)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* Configure Interrupt mode for SD detection pin */
+ gpio_init_structure.Pin = SD_DETECT_PIN;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_FAST;
+ gpio_init_structure.Mode = GPIO_MODE_IT_RISING_FALLING;
+ HAL_GPIO_Init(SD_DETECT_GPIO_PORT, &gpio_init_structure);
+
+ /* Enable and set SD detect EXTI Interrupt to the lowest priority */
+ HAL_NVIC_SetPriority((IRQn_Type)(SD_DETECT_EXTI_IRQn), 0x0F, 0x00);
+ HAL_NVIC_EnableIRQ((IRQn_Type)(SD_DETECT_EXTI_IRQn));
+
+ return MSD_OK;
+}
+
+/**
+ * @brief Detects if SD card is correctly plugged in the memory slot or not.
+ * @retval Returns if SD is detected or not
+ */
+uint8_t BSP_SD_IsDetected(void)
+{
+ __IO uint8_t status = SD_PRESENT;
+
+ /* Check SD card detect pin */
+ if (HAL_GPIO_ReadPin(SD_DETECT_GPIO_PORT, SD_DETECT_PIN) == GPIO_PIN_SET)
+ {
+ status = SD_NOT_PRESENT;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Reads block(s) from a specified address in an SD card, in polling mode.
+ * @param pData: Pointer to the buffer that will contain the data to transmit
+ * @param ReadAddr: Address from where data is to be read
+ * @param BlockSize: SD card data block size, that should be 512
+ * @param NumOfBlocks: Number of SD blocks to read
+ * @retval SD status
+ */
+uint8_t BSP_SD_ReadBlocks(uint32_t *pData, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumOfBlocks)
+{
+ if(HAL_SD_ReadBlocks(&uSdHandle, pData, ReadAddr, BlockSize, NumOfBlocks) != SD_OK)
+ {
+ return MSD_ERROR;
+ }
+ else
+ {
+ return MSD_OK;
+ }
+}
+
+/**
+ * @brief Writes block(s) to a specified address in an SD card, in polling mode.
+ * @param pData: Pointer to the buffer that will contain the data to transmit
+ * @param WriteAddr: Address from where data is to be written
+ * @param BlockSize: SD card data block size, that should be 512
+ * @param NumOfBlocks: Number of SD blocks to write
+ * @retval SD status
+ */
+uint8_t BSP_SD_WriteBlocks(uint32_t *pData, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumOfBlocks)
+{
+ if(HAL_SD_WriteBlocks(&uSdHandle, pData, WriteAddr, BlockSize, NumOfBlocks) != SD_OK)
+ {
+ return MSD_ERROR;
+ }
+ else
+ {
+ return MSD_OK;
+ }
+}
+
+/**
+ * @brief Reads block(s) from a specified address in an SD card, in DMA mode.
+ * @param pData: Pointer to the buffer that will contain the data to transmit
+ * @param ReadAddr: Address from where data is to be read
+ * @param BlockSize: SD card data block size, that should be 512
+ * @param NumOfBlocks: Number of SD blocks to read
+ * @retval SD status
+ */
+uint8_t BSP_SD_ReadBlocks_DMA(uint32_t *pData, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumOfBlocks)
+{
+ uint8_t sd_state = MSD_OK;
+
+ /* Read block(s) in DMA transfer mode */
+ if(HAL_SD_ReadBlocks_DMA(&uSdHandle, pData, ReadAddr, BlockSize, NumOfBlocks) != SD_OK)
+ {
+ sd_state = MSD_ERROR;
+ }
+
+ /* Wait until transfer is complete */
+ if(sd_state == MSD_OK)
+ {
+ if(HAL_SD_CheckReadOperation(&uSdHandle, (uint32_t)SD_DATATIMEOUT) != SD_OK)
+ {
+ sd_state = MSD_ERROR;
+ }
+ else
+ {
+ sd_state = MSD_OK;
+ }
+ }
+
+ return sd_state;
+}
+
+/**
+ * @brief Writes block(s) to a specified address in an SD card, in DMA mode.
+ * @param pData: Pointer to the buffer that will contain the data to transmit
+ * @param WriteAddr: Address from where data is to be written
+ * @param BlockSize: SD card data block size, that should be 512
+ * @param NumOfBlocks: Number of SD blocks to write
+ * @retval SD status
+ */
+uint8_t BSP_SD_WriteBlocks_DMA(uint32_t *pData, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumOfBlocks)
+{
+ uint8_t sd_state = MSD_OK;
+
+ /* Write block(s) in DMA transfer mode */
+ if(HAL_SD_WriteBlocks_DMA(&uSdHandle, pData, WriteAddr, BlockSize, NumOfBlocks) != SD_OK)
+ {
+ sd_state = MSD_ERROR;
+ }
+
+ /* Wait until transfer is complete */
+ if(sd_state == MSD_OK)
+ {
+ if(HAL_SD_CheckWriteOperation(&uSdHandle, (uint32_t)SD_DATATIMEOUT) != SD_OK)
+ {
+ sd_state = MSD_ERROR;
+ }
+ else
+ {
+ sd_state = MSD_OK;
+ }
+ }
+
+ return sd_state;
+}
+
+/**
+ * @brief Erases the specified memory area of the given SD card.
+ * @param StartAddr: Start byte address
+ * @param EndAddr: End byte address
+ * @retval SD status
+ */
+uint8_t BSP_SD_Erase(uint64_t StartAddr, uint64_t EndAddr)
+{
+ if(HAL_SD_Erase(&uSdHandle, StartAddr, EndAddr) != SD_OK)
+ {
+ return MSD_ERROR;
+ }
+ else
+ {
+ return MSD_OK;
+ }
+}
+
+/**
+ * @brief Initializes the SD MSP.
+ * @param hsd: SD handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_SD_MspInit(SD_HandleTypeDef *hsd, void *Params)
+{
+ static DMA_HandleTypeDef dma_rx_handle;
+ static DMA_HandleTypeDef dma_tx_handle;
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* Enable SDIO clock */
+ __HAL_RCC_SDMMC1_CLK_ENABLE();
+
+ /* Enable DMA2 clocks */
+ __DMAx_TxRx_CLK_ENABLE();
+
+ /* Enable GPIOs clock */
+ __HAL_RCC_GPIOC_CLK_ENABLE();
+ __HAL_RCC_GPIOD_CLK_ENABLE();
+
+ /* Common GPIO configuration */
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ gpio_init_structure.Alternate = GPIO_AF12_SDMMC1;
+
+ /* GPIOC configuration */
+ gpio_init_structure.Pin = GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12;
+ HAL_GPIO_Init(GPIOC, &gpio_init_structure);
+
+ /* GPIOD configuration */
+ gpio_init_structure.Pin = GPIO_PIN_2;
+ HAL_GPIO_Init(GPIOD, &gpio_init_structure);
+
+ /* NVIC configuration for SDIO interrupts */
+ HAL_NVIC_SetPriority(SDMMC1_IRQn, 5, 0);
+ HAL_NVIC_EnableIRQ(SDMMC1_IRQn);
+
+ /* Configure DMA Rx parameters */
+ dma_rx_handle.Init.Channel = SD_DMAx_Rx_CHANNEL;
+ dma_rx_handle.Init.Direction = DMA_PERIPH_TO_MEMORY;
+ dma_rx_handle.Init.PeriphInc = DMA_PINC_DISABLE;
+ dma_rx_handle.Init.MemInc = DMA_MINC_ENABLE;
+ dma_rx_handle.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
+ dma_rx_handle.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
+ dma_rx_handle.Init.Mode = DMA_PFCTRL;
+ dma_rx_handle.Init.Priority = DMA_PRIORITY_VERY_HIGH;
+ dma_rx_handle.Init.FIFOMode = DMA_FIFOMODE_ENABLE;
+ dma_rx_handle.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
+ dma_rx_handle.Init.MemBurst = DMA_MBURST_INC4;
+ dma_rx_handle.Init.PeriphBurst = DMA_PBURST_INC4;
+
+ dma_rx_handle.Instance = SD_DMAx_Rx_STREAM;
+
+ /* Associate the DMA handle */
+ __HAL_LINKDMA(hsd, hdmarx, dma_rx_handle);
+
+ /* Deinitialize the stream for new transfer */
+ HAL_DMA_DeInit(&dma_rx_handle);
+
+ /* Configure the DMA stream */
+ HAL_DMA_Init(&dma_rx_handle);
+
+ /* Configure DMA Tx parameters */
+ dma_tx_handle.Init.Channel = SD_DMAx_Tx_CHANNEL;
+ dma_tx_handle.Init.Direction = DMA_MEMORY_TO_PERIPH;
+ dma_tx_handle.Init.PeriphInc = DMA_PINC_DISABLE;
+ dma_tx_handle.Init.MemInc = DMA_MINC_ENABLE;
+ dma_tx_handle.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
+ dma_tx_handle.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
+ dma_tx_handle.Init.Mode = DMA_PFCTRL;
+ dma_tx_handle.Init.Priority = DMA_PRIORITY_VERY_HIGH;
+ dma_tx_handle.Init.FIFOMode = DMA_FIFOMODE_ENABLE;
+ dma_tx_handle.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
+ dma_tx_handle.Init.MemBurst = DMA_MBURST_INC4;
+ dma_tx_handle.Init.PeriphBurst = DMA_PBURST_INC4;
+
+ dma_tx_handle.Instance = SD_DMAx_Tx_STREAM;
+
+ /* Associate the DMA handle */
+ __HAL_LINKDMA(hsd, hdmatx, dma_tx_handle);
+
+ /* Deinitialize the stream for new transfer */
+ HAL_DMA_DeInit(&dma_tx_handle);
+
+ /* Configure the DMA stream */
+ HAL_DMA_Init(&dma_tx_handle);
+
+ /* NVIC configuration for DMA transfer complete interrupt */
+ HAL_NVIC_SetPriority(SD_DMAx_Rx_IRQn, 6, 0);
+ HAL_NVIC_EnableIRQ(SD_DMAx_Rx_IRQn);
+
+ /* NVIC configuration for DMA transfer complete interrupt */
+ HAL_NVIC_SetPriority(SD_DMAx_Tx_IRQn, 6, 0);
+ HAL_NVIC_EnableIRQ(SD_DMAx_Tx_IRQn);
+}
+
+/**
+ * @brief Initializes the SD Detect pin MSP.
+ * @param hsd: SD handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_SD_Detect_MspInit(SD_HandleTypeDef *hsd, void *Params)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ SD_DETECT_GPIO_CLK_ENABLE();
+
+ /* GPIO configuration in input for uSD_Detect signal */
+ gpio_init_structure.Pin = SD_DETECT_PIN;
+ gpio_init_structure.Mode = GPIO_MODE_INPUT;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_HIGH;
+ HAL_GPIO_Init(SD_DETECT_GPIO_PORT, &gpio_init_structure);
+}
+
+/**
+ * @brief DeInitializes the SD MSP.
+ * @param hsd: SD handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_SD_MspDeInit(SD_HandleTypeDef *hsd, void *Params)
+{
+ static DMA_HandleTypeDef dma_rx_handle;
+ static DMA_HandleTypeDef dma_tx_handle;
+
+ /* Disable NVIC for DMA transfer complete interrupts */
+ HAL_NVIC_DisableIRQ(SD_DMAx_Rx_IRQn);
+ HAL_NVIC_DisableIRQ(SD_DMAx_Tx_IRQn);
+
+ /* Deinitialize the stream for new transfer */
+ dma_rx_handle.Instance = SD_DMAx_Rx_STREAM;
+ HAL_DMA_DeInit(&dma_rx_handle);
+
+ /* Deinitialize the stream for new transfer */
+ dma_tx_handle.Instance = SD_DMAx_Tx_STREAM;
+ HAL_DMA_DeInit(&dma_tx_handle);
+
+ /* Disable NVIC for SDIO interrupts */
+ HAL_NVIC_DisableIRQ(SDMMC1_IRQn);
+
+ /* DeInit GPIO pins can be done in the application
+ (by surcharging this __weak function) */
+
+ /* Disable SDMMC1 clock */
+ __HAL_RCC_SDMMC1_CLK_DISABLE();
+
+ /* GPIO pins clock and DMA clocks can be shut down in the application
+ by surcharging this __weak function */
+}
+
+/**
+ * @brief Handles SD card interrupt request.
+ * @retval None
+ */
+void BSP_SD_IRQHandler(void)
+{
+ HAL_SD_IRQHandler(&uSdHandle);
+}
+
+/**
+ * @brief Handles SD DMA Tx transfer interrupt request.
+ * @retval None
+ */
+void BSP_SD_DMA_Tx_IRQHandler(void)
+{
+ HAL_DMA_IRQHandler(uSdHandle.hdmatx);
+}
+
+/**
+ * @brief Handles SD DMA Rx transfer interrupt request.
+ * @retval None
+ */
+void BSP_SD_DMA_Rx_IRQHandler(void)
+{
+ HAL_DMA_IRQHandler(uSdHandle.hdmarx);
+}
+
+/**
+ * @brief Gets the current SD card data status.
+ * @retval Data transfer state.
+ * This value can be one of the following values:
+ * @arg SD_TRANSFER_OK: No data transfer is acting
+ * @arg SD_TRANSFER_BUSY: Data transfer is acting
+ * @arg SD_TRANSFER_ERROR: Data transfer error
+ */
+HAL_SD_TransferStateTypedef BSP_SD_GetStatus(void)
+{
+ return(HAL_SD_GetStatus(&uSdHandle));
+}
+
+/**
+ * @brief Get SD information about specific SD card.
+ * @param CardInfo: Pointer to HAL_SD_CardInfoTypedef structure
+ * @retval None
+ */
+void BSP_SD_GetCardInfo(HAL_SD_CardInfoTypedef *CardInfo)
+{
+ /* Get SD card Information */
+ HAL_SD_Get_CardInfo(&uSdHandle, CardInfo);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_sd.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,159 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_sd.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file contains the common defines and functions prototypes for
+ * the stm32746g_discovery_sd.c driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32746G_DISCOVERY_SD_H
+#define __STM32746G_DISCOVERY_SD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32746g_discovery.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_SD
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SD_Exported_Types STM32746G_DISCOVERY_SD Exported Types
+ * @{
+ */
+
+/**
+ * @brief SD Card information structure
+ */
+#define SD_CardInfo HAL_SD_CardInfoTypedef
+/**
+ * @}
+ */
+
+/**
+ * @brief SD status structure definition
+ */
+#define MSD_OK ((uint8_t)0x00)
+#define MSD_ERROR ((uint8_t)0x01)
+#define MSD_ERROR_SD_NOT_PRESENT ((uint8_t)0x02)
+
+/** @defgroup STM32746G_DISCOVERY_SD_Exported_Constants STM32746G_DISCOVERY_SD Exported Constants
+ * @{
+ */
+#define SD_PRESENT ((uint8_t)0x01)
+#define SD_NOT_PRESENT ((uint8_t)0x00)
+
+#define SD_DATATIMEOUT ((uint32_t)100000000)
+
+/* DMA definitions for SD DMA transfer */
+#define __DMAx_TxRx_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
+#define SD_DMAx_Tx_CHANNEL DMA_CHANNEL_4
+#define SD_DMAx_Rx_CHANNEL DMA_CHANNEL_4
+#define SD_DMAx_Tx_STREAM DMA2_Stream6
+#define SD_DMAx_Rx_STREAM DMA2_Stream3
+#define SD_DMAx_Tx_IRQn DMA2_Stream6_IRQn
+#define SD_DMAx_Rx_IRQn DMA2_Stream3_IRQn
+#define SD_DMAx_Tx_IRQHandler DMA2_Stream6_IRQHandler
+#define SD_DMAx_Rx_IRQHandler DMA2_Stream3_IRQHandler
+#define SD_DetectIRQHandler() HAL_GPIO_EXTI_IRQHandler(SD_DETECT_PIN)
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SD_Exported_Macro STM32746G_DISCOVERY_SD Exported Macro
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_SD_Exported_Functions
+ * @{
+ */
+uint8_t BSP_SD_Init(void);
+uint8_t BSP_SD_DeInit(void);
+uint8_t BSP_SD_ITConfig(void);
+void BSP_SD_DetectIT(void);
+void BSP_SD_DetectCallback(void);
+uint8_t BSP_SD_ReadBlocks(uint32_t *pData, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumOfBlocks);
+uint8_t BSP_SD_WriteBlocks(uint32_t *pData, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumOfBlocks);
+uint8_t BSP_SD_ReadBlocks_DMA(uint32_t *pData, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumOfBlocks);
+uint8_t BSP_SD_WriteBlocks_DMA(uint32_t *pData, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumOfBlocks);
+uint8_t BSP_SD_Erase(uint64_t StartAddr, uint64_t EndAddr);
+void BSP_SD_IRQHandler(void);
+void BSP_SD_DMA_Tx_IRQHandler(void);
+void BSP_SD_DMA_Rx_IRQHandler(void);
+HAL_SD_TransferStateTypedef BSP_SD_GetStatus(void);
+void BSP_SD_GetCardInfo(HAL_SD_CardInfoTypedef *CardInfo);
+uint8_t BSP_SD_IsDetected(void);
+
+/* These functions can be modified in case the current settings (e.g. DMA stream)
+ need to be changed for specific application needs */
+void BSP_SD_MspInit(SD_HandleTypeDef *hsd, void *Params);
+void BSP_SD_Detect_MspInit(SD_HandleTypeDef *hsd, void *Params);
+void BSP_SD_MspDeInit(SD_HandleTypeDef *hsd, void *Params);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32746G_DISCOVERY_SD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_sdram.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,503 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_sdram.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file includes the SDRAM driver for the MT48LC4M32B2B5-7 memory
+ * device mounted on STM32746G-Discovery board.
+ @verbatim
+ 1. How To use this driver:
+ --------------------------
+ - This driver is used to drive the MT48LC4M32B2B5-7 SDRAM external memory mounted
+ on STM32746G-Discovery board.
+ - This driver does not need a specific component driver for the SDRAM device
+ to be included with.
+
+ 2. Driver description:
+ ---------------------
+ + Initialization steps:
+ o Initialize the SDRAM external memory using the BSP_SDRAM_Init() function. This
+ function includes the MSP layer hardware resources initialization and the
+ FMC controller configuration to interface with the external SDRAM memory.
+ o It contains the SDRAM initialization sequence to program the SDRAM external
+ device using the function BSP_SDRAM_Initialization_sequence(). Note that this
+ sequence is standard for all SDRAM devices, but can include some differences
+ from a device to another. If it is the case, the right sequence should be
+ implemented separately.
+
+ + SDRAM read/write operations
+ o SDRAM external memory can be accessed with read/write operations once it is
+ initialized.
+ Read/write operation can be performed with AHB access using the functions
+ BSP_SDRAM_ReadData()/BSP_SDRAM_WriteData(), or by DMA transfer using the functions
+ BSP_SDRAM_ReadData_DMA()/BSP_SDRAM_WriteData_DMA().
+ o The AHB access is performed with 32-bit width transaction, the DMA transfer
+ configuration is fixed at single (no burst) word transfer (see the
+ SDRAM_MspInit() static function).
+ o User can implement his own functions for read/write access with his desired
+ configurations.
+ o If interrupt mode is used for DMA transfer, the function BSP_SDRAM_DMA_IRQHandler()
+ is called in IRQ handler file, to serve the generated interrupt once the DMA
+ transfer is complete.
+ o You can send a command to the SDRAM device in runtime using the function
+ BSP_SDRAM_Sendcmd(), and giving the desired command as parameter chosen between
+ the predefined commands of the "FMC_SDRAM_CommandTypeDef" structure.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32746g_discovery_sdram.h"
+
+// mbed function to replace HAL_Delay function
+void wait_ms(int ms);
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SDRAM STM32746G_DISCOVERY_SDRAM
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SDRAM_Private_Types_Definitions STM32746G_DISCOVERY_SDRAM Private Types Definitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SDRAM_Private_Defines STM32746G_DISCOVERY_SDRAM Private Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SDRAM_Private_Macros STM32746G_DISCOVERY_SDRAM Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SDRAM_Private_Variables STM32746G_DISCOVERY_SDRAM Private Variables
+ * @{
+ */
+static SDRAM_HandleTypeDef sdramHandle;
+static FMC_SDRAM_TimingTypeDef Timing;
+static FMC_SDRAM_CommandTypeDef Command;
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SDRAM_Private_Function_Prototypes STM32746G_DISCOVERY_SDRAM Private Function Prototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SDRAM_Exported_Functions STM32746G_DISCOVERY_SDRAM Exported Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes the SDRAM device.
+ * @retval SDRAM status
+ */
+uint8_t BSP_SDRAM_Init(void)
+{
+ static uint8_t sdramstatus = SDRAM_ERROR;
+ /* SDRAM device configuration */
+ sdramHandle.Instance = FMC_SDRAM_DEVICE;
+
+ /* Timing configuration for 100Mhz as SD clock frequency (System clock is up to 200Mhz) */
+ Timing.LoadToActiveDelay = 2;
+ Timing.ExitSelfRefreshDelay = 7;
+ Timing.SelfRefreshTime = 4;
+ Timing.RowCycleDelay = 7;
+ Timing.WriteRecoveryTime = 2;
+ Timing.RPDelay = 2;
+ Timing.RCDDelay = 2;
+
+ sdramHandle.Init.SDBank = FMC_SDRAM_BANK1;
+ sdramHandle.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_8;
+ sdramHandle.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_12;
+ sdramHandle.Init.MemoryDataWidth = SDRAM_MEMORY_WIDTH;
+ sdramHandle.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4;
+ sdramHandle.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_2;
+ sdramHandle.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE;
+ sdramHandle.Init.SDClockPeriod = SDCLOCK_PERIOD;
+ sdramHandle.Init.ReadBurst = FMC_SDRAM_RBURST_ENABLE;
+ sdramHandle.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0;
+
+ /* SDRAM controller initialization */
+
+ BSP_SDRAM_MspInit(&sdramHandle, NULL); /* __weak function can be rewritten by the application */
+
+ if(HAL_SDRAM_Init(&sdramHandle, &Timing) != HAL_OK)
+ {
+ sdramstatus = SDRAM_ERROR;
+ }
+ else
+ {
+ sdramstatus = SDRAM_OK;
+ }
+
+ /* SDRAM initialization sequence */
+ BSP_SDRAM_Initialization_sequence(REFRESH_COUNT);
+
+ return sdramstatus;
+}
+
+/**
+ * @brief DeInitializes the SDRAM device.
+ * @retval SDRAM status
+ */
+uint8_t BSP_SDRAM_DeInit(void)
+{
+ static uint8_t sdramstatus = SDRAM_ERROR;
+ /* SDRAM device de-initialization */
+ sdramHandle.Instance = FMC_SDRAM_DEVICE;
+
+ if(HAL_SDRAM_DeInit(&sdramHandle) != HAL_OK)
+ {
+ sdramstatus = SDRAM_ERROR;
+ }
+ else
+ {
+ sdramstatus = SDRAM_OK;
+ }
+
+ /* SDRAM controller de-initialization */
+ BSP_SDRAM_MspDeInit(&sdramHandle, NULL);
+
+ return sdramstatus;
+}
+
+/**
+ * @brief Programs the SDRAM device.
+ * @param RefreshCount: SDRAM refresh counter value
+ * @retval None
+ */
+void BSP_SDRAM_Initialization_sequence(uint32_t RefreshCount)
+{
+ __IO uint32_t tmpmrd = 0;
+
+ /* Step 1: Configure a clock configuration enable command */
+ Command.CommandMode = FMC_SDRAM_CMD_CLK_ENABLE;
+ Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
+ Command.AutoRefreshNumber = 1;
+ Command.ModeRegisterDefinition = 0;
+
+ /* Send the command */
+ HAL_SDRAM_SendCommand(&sdramHandle, &Command, SDRAM_TIMEOUT);
+
+ /* Step 2: Insert 100 us minimum delay */
+ /* Inserted delay is equal to 1 ms due to systick time base unit (ms) */
+ //HAL_Delay(1);
+ wait_ms(1);
+
+ /* Step 3: Configure a PALL (precharge all) command */
+ Command.CommandMode = FMC_SDRAM_CMD_PALL;
+ Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
+ Command.AutoRefreshNumber = 1;
+ Command.ModeRegisterDefinition = 0;
+
+ /* Send the command */
+ HAL_SDRAM_SendCommand(&sdramHandle, &Command, SDRAM_TIMEOUT);
+
+ /* Step 4: Configure an Auto Refresh command */
+ Command.CommandMode = FMC_SDRAM_CMD_AUTOREFRESH_MODE;
+ Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
+ Command.AutoRefreshNumber = 8;
+ Command.ModeRegisterDefinition = 0;
+
+ /* Send the command */
+ HAL_SDRAM_SendCommand(&sdramHandle, &Command, SDRAM_TIMEOUT);
+
+ /* Step 5: Program the external memory mode register */
+ tmpmrd = (uint32_t)SDRAM_MODEREG_BURST_LENGTH_1 |\
+ SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL |\
+ SDRAM_MODEREG_CAS_LATENCY_2 |\
+ SDRAM_MODEREG_OPERATING_MODE_STANDARD |\
+ SDRAM_MODEREG_WRITEBURST_MODE_SINGLE;
+
+ Command.CommandMode = FMC_SDRAM_CMD_LOAD_MODE;
+ Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
+ Command.AutoRefreshNumber = 1;
+ Command.ModeRegisterDefinition = tmpmrd;
+
+ /* Send the command */
+ HAL_SDRAM_SendCommand(&sdramHandle, &Command, SDRAM_TIMEOUT);
+
+ /* Step 6: Set the refresh rate counter */
+ /* Set the device refresh rate */
+ HAL_SDRAM_ProgramRefreshRate(&sdramHandle, RefreshCount);
+}
+
+/**
+ * @brief Reads an amount of data from the SDRAM memory in polling mode.
+ * @param uwStartAddress: Read start address
+ * @param pData: Pointer to data to be read
+ * @param uwDataSize: Size of read data from the memory
+ * @retval SDRAM status
+ */
+uint8_t BSP_SDRAM_ReadData(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize)
+{
+ if(HAL_SDRAM_Read_32b(&sdramHandle, (uint32_t *)uwStartAddress, pData, uwDataSize) != HAL_OK)
+ {
+ return SDRAM_ERROR;
+ }
+ else
+ {
+ return SDRAM_OK;
+ }
+}
+
+/**
+ * @brief Reads an amount of data from the SDRAM memory in DMA mode.
+ * @param uwStartAddress: Read start address
+ * @param pData: Pointer to data to be read
+ * @param uwDataSize: Size of read data from the memory
+ * @retval SDRAM status
+ */
+uint8_t BSP_SDRAM_ReadData_DMA(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize)
+{
+ if(HAL_SDRAM_Read_DMA(&sdramHandle, (uint32_t *)uwStartAddress, pData, uwDataSize) != HAL_OK)
+ {
+ return SDRAM_ERROR;
+ }
+ else
+ {
+ return SDRAM_OK;
+ }
+}
+
+/**
+ * @brief Writes an amount of data to the SDRAM memory in polling mode.
+ * @param uwStartAddress: Write start address
+ * @param pData: Pointer to data to be written
+ * @param uwDataSize: Size of written data from the memory
+ * @retval SDRAM status
+ */
+uint8_t BSP_SDRAM_WriteData(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize)
+{
+ if(HAL_SDRAM_Write_32b(&sdramHandle, (uint32_t *)uwStartAddress, pData, uwDataSize) != HAL_OK)
+ {
+ return SDRAM_ERROR;
+ }
+ else
+ {
+ return SDRAM_OK;
+ }
+}
+
+/**
+ * @brief Writes an amount of data to the SDRAM memory in DMA mode.
+ * @param uwStartAddress: Write start address
+ * @param pData: Pointer to data to be written
+ * @param uwDataSize: Size of written data from the memory
+ * @retval SDRAM status
+ */
+uint8_t BSP_SDRAM_WriteData_DMA(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize)
+{
+ if(HAL_SDRAM_Write_DMA(&sdramHandle, (uint32_t *)uwStartAddress, pData, uwDataSize) != HAL_OK)
+ {
+ return SDRAM_ERROR;
+ }
+ else
+ {
+ return SDRAM_OK;
+ }
+}
+
+/**
+ * @brief Sends command to the SDRAM bank.
+ * @param SdramCmd: Pointer to SDRAM command structure
+ * @retval SDRAM status
+ */
+uint8_t BSP_SDRAM_Sendcmd(FMC_SDRAM_CommandTypeDef *SdramCmd)
+{
+ if(HAL_SDRAM_SendCommand(&sdramHandle, SdramCmd, SDRAM_TIMEOUT) != HAL_OK)
+ {
+ return SDRAM_ERROR;
+ }
+ else
+ {
+ return SDRAM_OK;
+ }
+}
+
+/**
+ * @brief Handles SDRAM DMA transfer interrupt request.
+ * @retval None
+ */
+void BSP_SDRAM_DMA_IRQHandler(void)
+{
+ HAL_DMA_IRQHandler(sdramHandle.hdma);
+}
+
+/**
+ * @brief Initializes SDRAM MSP.
+ * @param hsdram: SDRAM handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram, void *Params)
+{
+ static DMA_HandleTypeDef dma_handle;
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* Enable FMC clock */
+ __HAL_RCC_FMC_CLK_ENABLE();
+
+ /* Enable chosen DMAx clock */
+ __DMAx_CLK_ENABLE();
+
+ /* Enable GPIOs clock */
+ __HAL_RCC_GPIOC_CLK_ENABLE();
+ __HAL_RCC_GPIOD_CLK_ENABLE();
+ __HAL_RCC_GPIOE_CLK_ENABLE();
+ __HAL_RCC_GPIOF_CLK_ENABLE();
+ __HAL_RCC_GPIOG_CLK_ENABLE();
+ __HAL_RCC_GPIOH_CLK_ENABLE();
+
+ /* Common GPIO configuration */
+ gpio_init_structure.Mode = GPIO_MODE_AF_PP;
+ gpio_init_structure.Pull = GPIO_PULLUP;
+ gpio_init_structure.Speed = GPIO_SPEED_FAST;
+ gpio_init_structure.Alternate = GPIO_AF12_FMC;
+
+ /* GPIOC configuration */
+ gpio_init_structure.Pin = GPIO_PIN_3;
+ HAL_GPIO_Init(GPIOC, &gpio_init_structure);
+
+ /* GPIOD configuration */
+ gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_3 | GPIO_PIN_8 | GPIO_PIN_9 |
+ GPIO_PIN_10 | GPIO_PIN_14 | GPIO_PIN_15;
+ HAL_GPIO_Init(GPIOD, &gpio_init_structure);
+
+ /* GPIOE configuration */
+ gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_7| GPIO_PIN_8 | GPIO_PIN_9 |\
+ GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_14 |\
+ GPIO_PIN_15;
+ HAL_GPIO_Init(GPIOE, &gpio_init_structure);
+
+ /* GPIOF configuration */
+ gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2| GPIO_PIN_3 | GPIO_PIN_4 |\
+ GPIO_PIN_5 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_14 |\
+ GPIO_PIN_15;
+ HAL_GPIO_Init(GPIOF, &gpio_init_structure);
+
+ /* GPIOG configuration */
+ gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_4| GPIO_PIN_5 | GPIO_PIN_8 |\
+ GPIO_PIN_15;
+ HAL_GPIO_Init(GPIOG, &gpio_init_structure);
+
+ /* GPIOH configuration */
+ gpio_init_structure.Pin = GPIO_PIN_3 | GPIO_PIN_5;
+ HAL_GPIO_Init(GPIOH, &gpio_init_structure);
+
+ /* Configure common DMA parameters */
+ dma_handle.Init.Channel = SDRAM_DMAx_CHANNEL;
+ dma_handle.Init.Direction = DMA_MEMORY_TO_MEMORY;
+ dma_handle.Init.PeriphInc = DMA_PINC_ENABLE;
+ dma_handle.Init.MemInc = DMA_MINC_ENABLE;
+ dma_handle.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
+ dma_handle.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
+ dma_handle.Init.Mode = DMA_NORMAL;
+ dma_handle.Init.Priority = DMA_PRIORITY_HIGH;
+ dma_handle.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
+ dma_handle.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
+ dma_handle.Init.MemBurst = DMA_MBURST_SINGLE;
+ dma_handle.Init.PeriphBurst = DMA_PBURST_SINGLE;
+
+ dma_handle.Instance = SDRAM_DMAx_STREAM;
+
+ /* Associate the DMA handle */
+ __HAL_LINKDMA(hsdram, hdma, dma_handle);
+
+ /* Deinitialize the stream for new transfer */
+ HAL_DMA_DeInit(&dma_handle);
+
+ /* Configure the DMA stream */
+ HAL_DMA_Init(&dma_handle);
+
+ /* NVIC configuration for DMA transfer complete interrupt */
+ HAL_NVIC_SetPriority(SDRAM_DMAx_IRQn, 5, 0);
+ HAL_NVIC_EnableIRQ(SDRAM_DMAx_IRQn);
+}
+
+/**
+ * @brief DeInitializes SDRAM MSP.
+ * @param hsdram: SDRAM handle
+ * @param Params
+ * @retval None
+ */
+__weak void BSP_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram, void *Params)
+{
+ static DMA_HandleTypeDef dma_handle;
+
+ /* Disable NVIC configuration for DMA interrupt */
+ HAL_NVIC_DisableIRQ(SDRAM_DMAx_IRQn);
+
+ /* Deinitialize the stream for new transfer */
+ dma_handle.Instance = SDRAM_DMAx_STREAM;
+ HAL_DMA_DeInit(&dma_handle);
+
+ /* GPIO pins clock, FMC clock and DMA clock can be shut down in the applications
+ by surcharging this __weak function */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_sdram.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,165 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_sdram.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file contains the common defines and functions prototypes for
+ * the stm32746g_discovery_sdram.c driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32746G_DISCOVERY_SDRAM_H
+#define __STM32746G_DISCOVERY_SDRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_SDRAM
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SDRAM_Exported_Types STM32746G_DISCOVERY_SDRAM Exported Types
+ * @{
+ */
+
+/**
+ * @brief SDRAM status structure definition
+ */
+#define SDRAM_OK ((uint8_t)0x00)
+#define SDRAM_ERROR ((uint8_t)0x01)
+
+/** @defgroup STM32746G_DISCOVERY_SDRAM_Exported_Constants STM32746G_DISCOVERY_SDRAM Exported Constants
+ * @{
+ */
+#define SDRAM_DEVICE_ADDR ((uint32_t)0xC0000000)
+#define SDRAM_DEVICE_SIZE ((uint32_t)0x800000) /* SDRAM device size in MBytes */
+
+/* #define SDRAM_MEMORY_WIDTH FMC_SDRAM_MEM_BUS_WIDTH_8 */
+#define SDRAM_MEMORY_WIDTH FMC_SDRAM_MEM_BUS_WIDTH_16
+
+#define SDCLOCK_PERIOD FMC_SDRAM_CLOCK_PERIOD_2
+/* #define SDCLOCK_PERIOD FMC_SDRAM_CLOCK_PERIOD_3 */
+
+#define REFRESH_COUNT ((uint32_t)0x0603) /* SDRAM refresh counter (100Mhz SD clock) */
+
+#define SDRAM_TIMEOUT ((uint32_t)0xFFFF)
+
+/* DMA definitions for SDRAM DMA transfer */
+#define __DMAx_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
+#define __DMAx_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
+#define SDRAM_DMAx_CHANNEL DMA_CHANNEL_0
+#define SDRAM_DMAx_STREAM DMA2_Stream0
+#define SDRAM_DMAx_IRQn DMA2_Stream0_IRQn
+#define SDRAM_DMAx_IRQHandler DMA2_Stream0_IRQHandler
+/**
+ * @}
+ */
+
+/**
+ * @brief FMC SDRAM Mode definition register defines
+ */
+#define SDRAM_MODEREG_BURST_LENGTH_1 ((uint16_t)0x0000)
+#define SDRAM_MODEREG_BURST_LENGTH_2 ((uint16_t)0x0001)
+#define SDRAM_MODEREG_BURST_LENGTH_4 ((uint16_t)0x0002)
+#define SDRAM_MODEREG_BURST_LENGTH_8 ((uint16_t)0x0004)
+#define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000)
+#define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008)
+#define SDRAM_MODEREG_CAS_LATENCY_2 ((uint16_t)0x0020)
+#define SDRAM_MODEREG_CAS_LATENCY_3 ((uint16_t)0x0030)
+#define SDRAM_MODEREG_OPERATING_MODE_STANDARD ((uint16_t)0x0000)
+#define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000)
+#define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200)
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_SDRAM_Exported_Macro STM32746G_DISCOVERY_SDRAM Exported Macro
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_SDRAM_Exported_Functions
+ * @{
+ */
+uint8_t BSP_SDRAM_Init(void);
+uint8_t BSP_SDRAM_DeInit(void);
+void BSP_SDRAM_Initialization_sequence(uint32_t RefreshCount);
+uint8_t BSP_SDRAM_ReadData(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize);
+uint8_t BSP_SDRAM_ReadData_DMA(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize);
+uint8_t BSP_SDRAM_WriteData(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize);
+uint8_t BSP_SDRAM_WriteData_DMA(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize);
+uint8_t BSP_SDRAM_Sendcmd(FMC_SDRAM_CommandTypeDef *SdramCmd);
+void BSP_SDRAM_DMA_IRQHandler(void);
+
+/* These functions can be modified in case the current settings (e.g. DMA stream)
+ need to be changed for specific application needs */
+void BSP_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram, void *Params);
+void BSP_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram, void *Params);
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32746G_DISCOVERY_SDRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_ts.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,447 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_ts.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file provides a set of functions needed to manage the Touch
+ * Screen on STM32746G-Discovery board.
+ @verbatim
+ 1. How To use this driver:
+ --------------------------
+ - This driver is used to drive the touch screen module of the STM32746G-Discovery
+ board on the RK043FN48H-CT672B 480x272 LCD screen with capacitive touch screen.
+ - The FT5336 component driver must be included in project files according to
+ the touch screen driver present on this board.
+
+ 2. Driver description:
+ ---------------------
+ + Initialization steps:
+ o Initialize the TS module using the BSP_TS_Init() function. This
+ function includes the MSP layer hardware resources initialization and the
+ communication layer configuration to start the TS use. The LCD size properties
+ (x and y) are passed as parameters.
+ o If TS interrupt mode is desired, you must configure the TS interrupt mode
+ by calling the function BSP_TS_ITConfig(). The TS interrupt mode is generated
+ as an external interrupt whenever a touch is detected.
+ The interrupt mode internally uses the IO functionalities driver driven by
+ the IO expander, to configure the IT line.
+
+ + Touch screen use
+ o The touch screen state is captured whenever the function BSP_TS_GetState() is
+ used. This function returns information about the last LCD touch occurred
+ in the TS_StateTypeDef structure.
+ o If TS interrupt mode is used, the function BSP_TS_ITGetStatus() is needed to get
+ the interrupt status. To clear the IT pending bits, you should call the
+ function BSP_TS_ITClear().
+ o The IT is handled using the corresponding external interrupt IRQ handler,
+ the user IT callback treatment is implemented on the same external interrupt
+ callback.
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32746g_discovery_ts.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_TS STM32746G_DISCOVERY_TS
+ * @{
+ */
+
+/** @defgroup STM32746G_DISCOVERY_TS_Private_Types_Definitions STM32746G_DISCOVERY_TS Types Definitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_TS_Private_Defines STM32746G_DISCOVERY_TS Types Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_TS_Private_Macros STM32746G_DISCOVERY_TS Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_TS_Imported_Variables STM32746G_DISCOVERY_TS Imported Variables
+ * @{
+ */
+ /**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_TS_Private_Variables STM32746G_DISCOVERY_TS Private Variables
+ * @{
+ */
+static TS_DrvTypeDef *tsDriver;
+static uint16_t tsXBoundary, tsYBoundary;
+static uint8_t tsOrientation;
+static uint8_t I2cAddress;
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_TS_Private_Function_Prototypes STM32746G_DISCOVERY_TS Private Function Prototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_TS_Exported_Functions STM32746G_DISCOVERY_TS Exported Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes and configures the touch screen functionalities and
+ * configures all necessary hardware resources (GPIOs, I2C, clocks..).
+ * @param ts_SizeX: Maximum X size of the TS area on LCD
+ * @param ts_SizeY: Maximum Y size of the TS area on LCD
+ * @retval TS_OK if all initializations are OK. Other value if error.
+ */
+uint8_t BSP_TS_Init(uint16_t ts_SizeX, uint16_t ts_SizeY)
+{
+ uint8_t status = TS_OK;
+ tsXBoundary = ts_SizeX;
+ tsYBoundary = ts_SizeY;
+
+ /* Read ID and verify if the touch screen driver is ready */
+ ft5336_ts_drv.Init(TS_I2C_ADDRESS);
+ if(ft5336_ts_drv.ReadID(TS_I2C_ADDRESS) == FT5336_ID_VALUE)
+ {
+ /* Initialize the TS driver structure */
+ tsDriver = &ft5336_ts_drv;
+ I2cAddress = TS_I2C_ADDRESS;
+ tsOrientation = TS_SWAP_XY;
+
+ /* Initialize the TS driver */
+ tsDriver->Start(I2cAddress);
+ }
+ else
+ {
+ status = TS_DEVICE_NOT_FOUND;
+ }
+
+ return status;
+}
+
+/**
+ * @brief DeInitializes the TouchScreen.
+ * @retval TS state
+ */
+uint8_t BSP_TS_DeInit(void)
+{
+ /* Actually ts_driver does not provide a DeInit function */
+ return TS_OK;
+}
+
+/**
+ * @brief Configures and enables the touch screen interrupts.
+ * @retval TS_OK if all initializations are OK. Other value if error.
+ */
+uint8_t BSP_TS_ITConfig(void)
+{
+ GPIO_InitTypeDef gpio_init_structure;
+
+ /* Configure Interrupt mode for SD detection pin */
+ gpio_init_structure.Pin = TS_INT_PIN;
+ gpio_init_structure.Pull = GPIO_NOPULL;
+ gpio_init_structure.Speed = GPIO_SPEED_FAST;
+ gpio_init_structure.Mode = GPIO_MODE_IT_RISING;
+ HAL_GPIO_Init(TS_INT_GPIO_PORT, &gpio_init_structure);
+
+ /* Enable and set Touch screen EXTI Interrupt to the lowest priority */
+ HAL_NVIC_SetPriority((IRQn_Type)(TS_INT_EXTI_IRQn), 0x0F, 0x00);
+ HAL_NVIC_EnableIRQ((IRQn_Type)(TS_INT_EXTI_IRQn));
+
+ /* Enable the TS ITs */
+ tsDriver->EnableIT(I2cAddress);
+
+ return TS_OK;
+}
+
+/**
+ * @brief Gets the touch screen interrupt status.
+ * @retval TS_OK if all initializations are OK. Other value if error.
+ */
+uint8_t BSP_TS_ITGetStatus(void)
+{
+ /* Return the TS IT status */
+ return (tsDriver->GetITStatus(I2cAddress));
+}
+
+/**
+ * @brief Returns status and positions of the touch screen.
+ * @param TS_State: Pointer to touch screen current state structure
+ * @retval TS_OK if all initializations are OK. Other value if error.
+ */
+uint8_t BSP_TS_GetState(TS_StateTypeDef *TS_State)
+{
+ static uint32_t _x[TS_MAX_NB_TOUCH] = {0, 0};
+ static uint32_t _y[TS_MAX_NB_TOUCH] = {0, 0};
+ uint8_t ts_status = TS_OK;
+ uint16_t x[TS_MAX_NB_TOUCH];
+ uint16_t y[TS_MAX_NB_TOUCH];
+ uint16_t brute_x[TS_MAX_NB_TOUCH];
+ uint16_t brute_y[TS_MAX_NB_TOUCH];
+ uint16_t x_diff;
+ uint16_t y_diff;
+ uint32_t index;
+#if (TS_MULTI_TOUCH_SUPPORTED == 1)
+ uint32_t weight = 0;
+ uint32_t area = 0;
+ uint32_t event = 0;
+#endif /* TS_MULTI_TOUCH_SUPPORTED == 1 */
+
+ /* Check and update the number of touches active detected */
+ TS_State->touchDetected = tsDriver->DetectTouch(I2cAddress);
+
+ if(TS_State->touchDetected)
+ {
+ for(index=0; index < TS_State->touchDetected; index++)
+ {
+ /* Get each touch coordinates */
+ tsDriver->GetXY(I2cAddress, &(brute_x[index]), &(brute_y[index]));
+
+ if(tsOrientation == TS_SWAP_NONE)
+ {
+ x[index] = brute_x[index];
+ y[index] = brute_y[index];
+ }
+
+ if(tsOrientation & TS_SWAP_X)
+ {
+ x[index] = 4096 - brute_x[index];
+ }
+
+ if(tsOrientation & TS_SWAP_Y)
+ {
+ y[index] = 4096 - brute_y[index];
+ }
+
+ if(tsOrientation & TS_SWAP_XY)
+ {
+ y[index] = brute_x[index];
+ x[index] = brute_y[index];
+ }
+
+ x_diff = x[index] > _x[index]? (x[index] - _x[index]): (_x[index] - x[index]);
+ y_diff = y[index] > _y[index]? (y[index] - _y[index]): (_y[index] - y[index]);
+
+ if ((x_diff + y_diff) > 5)
+ {
+ _x[index] = x[index];
+ _y[index] = y[index];
+ }
+
+ if(I2cAddress == FT5336_I2C_SLAVE_ADDRESS)
+ {
+ TS_State->touchX[index] = x[index];
+ TS_State->touchY[index] = y[index];
+ }
+ else
+ {
+ /* 2^12 = 4096 : indexes are expressed on a dynamic of 4096 */
+ TS_State->touchX[index] = (tsXBoundary * _x[index]) >> 12;
+ TS_State->touchY[index] = (tsYBoundary * _y[index]) >> 12;
+ }
+
+#if (TS_MULTI_TOUCH_SUPPORTED == 1)
+
+ /* Get touch info related to the current touch */
+ ft5336_TS_GetTouchInfo(I2cAddress, index, &weight, &area, &event);
+
+ /* Update TS_State structure */
+ TS_State->touchWeight[index] = weight;
+ TS_State->touchArea[index] = area;
+
+ /* Remap touch event */
+ switch(event)
+ {
+ case FT5336_TOUCH_EVT_FLAG_PRESS_DOWN :
+ TS_State->touchEventId[index] = TOUCH_EVENT_PRESS_DOWN;
+ break;
+ case FT5336_TOUCH_EVT_FLAG_LIFT_UP :
+ TS_State->touchEventId[index] = TOUCH_EVENT_LIFT_UP;
+ break;
+ case FT5336_TOUCH_EVT_FLAG_CONTACT :
+ TS_State->touchEventId[index] = TOUCH_EVENT_CONTACT;
+ break;
+ case FT5336_TOUCH_EVT_FLAG_NO_EVENT :
+ TS_State->touchEventId[index] = TOUCH_EVENT_NO_EVT;
+ break;
+ default :
+ ts_status = TS_ERROR;
+ break;
+ } /* of switch(event) */
+
+#endif /* TS_MULTI_TOUCH_SUPPORTED == 1 */
+
+ } /* of for(index=0; index < TS_State->touchDetected; index++) */
+
+#if (TS_MULTI_TOUCH_SUPPORTED == 1)
+ /* Get gesture Id */
+ ts_status = BSP_TS_Get_GestureId(TS_State);
+#endif /* TS_MULTI_TOUCH_SUPPORTED == 1 */
+
+ } /* end of if(TS_State->touchDetected != 0) */
+
+ return (ts_status);
+}
+
+#if (TS_MULTI_TOUCH_SUPPORTED == 1)
+/**
+ * @brief Update gesture Id following a touch detected.
+ * @param TS_State: Pointer to touch screen current state structure
+ * @retval TS_OK if all initializations are OK. Other value if error.
+ */
+uint8_t BSP_TS_Get_GestureId(TS_StateTypeDef *TS_State)
+{
+ uint32_t gestureId = 0;
+ uint8_t ts_status = TS_OK;
+
+ /* Get gesture Id */
+ ft5336_TS_GetGestureID(I2cAddress, &gestureId);
+
+ /* Remap gesture Id to a TS_GestureIdTypeDef value */
+ switch(gestureId)
+ {
+ case FT5336_GEST_ID_NO_GESTURE :
+ TS_State->gestureId = GEST_ID_NO_GESTURE;
+ break;
+ case FT5336_GEST_ID_MOVE_UP :
+ TS_State->gestureId = GEST_ID_MOVE_UP;
+ break;
+ case FT5336_GEST_ID_MOVE_RIGHT :
+ TS_State->gestureId = GEST_ID_MOVE_RIGHT;
+ break;
+ case FT5336_GEST_ID_MOVE_DOWN :
+ TS_State->gestureId = GEST_ID_MOVE_DOWN;
+ break;
+ case FT5336_GEST_ID_MOVE_LEFT :
+ TS_State->gestureId = GEST_ID_MOVE_LEFT;
+ break;
+ case FT5336_GEST_ID_ZOOM_IN :
+ TS_State->gestureId = GEST_ID_ZOOM_IN;
+ break;
+ case FT5336_GEST_ID_ZOOM_OUT :
+ TS_State->gestureId = GEST_ID_ZOOM_OUT;
+ break;
+ default :
+ ts_status = TS_ERROR;
+ break;
+ } /* of switch(gestureId) */
+
+ return(ts_status);
+}
+#endif /* TS_MULTI_TOUCH_SUPPORTED == 1 */
+
+/**
+ * @brief Clears all touch screen interrupts.
+ */
+void BSP_TS_ITClear(void)
+{
+ /* Clear TS IT pending bits */
+ tsDriver->ClearIT(I2cAddress);
+}
+
+
+/** @defgroup STM32756G_DISCOVERY_TS_Private_Functions TS Private Functions
+ * @{
+ */
+
+
+/**
+ * @brief Function used to reset all touch data before a new acquisition
+ * of touch information.
+ * @param TS_State: Pointer to touch screen current state structure
+ * @retval TS_OK if OK, TE_ERROR if problem found.
+ */
+uint8_t BSP_TS_ResetTouchData(TS_StateTypeDef *TS_State)
+{
+ uint8_t ts_status = TS_ERROR;
+ uint32_t index;
+
+ if (TS_State != (TS_StateTypeDef *)NULL)
+ {
+ TS_State->gestureId = GEST_ID_NO_GESTURE;
+ TS_State->touchDetected = 0;
+
+ for(index = 0; index < TS_MAX_NB_TOUCH; index++)
+ {
+ TS_State->touchX[index] = 0;
+ TS_State->touchY[index] = 0;
+ TS_State->touchArea[index] = 0;
+ TS_State->touchEventId[index] = TOUCH_EVENT_NO_EVT;
+ TS_State->touchWeight[index] = 0;
+ }
+
+ ts_status = TS_OK;
+
+ } /* of if (TS_State != (TS_StateTypeDef *)NULL) */
+
+ return (ts_status);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/stm32746g_discovery_ts.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,214 @@
+/**
+ ******************************************************************************
+ * @file stm32746g_discovery_ts.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 25-June-2015
+ * @brief This file contains the common defines and functions prototypes for
+ * the stm32746g_discovery_ts.c driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32746G_DISCOVERY_TS_H
+#define __STM32746G_DISCOVERY_TS_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32746g_discovery.h"
+/* Include touch screen FT5336 component Driver */
+#include "ft5336.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY
+ * @{
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_TS
+ * @{
+ */
+
+ /** @defgroup STM32746G_DISCOVERY_TS_Exported_Constants STM32746G_DISCOVERY_TS Exported Constants
+ * @{
+ */
+
+/** @brief With FT5336 : maximum 5 touches detected simultaneously
+ */
+#define TS_MAX_NB_TOUCH ((uint32_t) FT5336_MAX_DETECTABLE_TOUCH)
+
+#define TS_NO_IRQ_PENDING ((uint8_t) 0)
+#define TS_IRQ_PENDING ((uint8_t) 1)
+
+#define TS_SWAP_NONE ((uint8_t) 0x01)
+#define TS_SWAP_X ((uint8_t) 0x02)
+#define TS_SWAP_Y ((uint8_t) 0x04)
+#define TS_SWAP_XY ((uint8_t) 0x08)
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_TS_Exported_Types STM32746G_DISCOVERY_TS Exported Types
+ * @{
+ */
+/**
+* @brief TS_StateTypeDef
+* Define TS State structure
+*/
+typedef struct
+{
+ uint8_t touchDetected; /*!< Total number of active touches detected at last scan */
+ uint16_t touchX[TS_MAX_NB_TOUCH]; /*!< Touch X[0], X[1] coordinates on 12 bits */
+ uint16_t touchY[TS_MAX_NB_TOUCH]; /*!< Touch Y[0], Y[1] coordinates on 12 bits */
+
+#if (TS_MULTI_TOUCH_SUPPORTED == 1)
+ uint8_t touchWeight[TS_MAX_NB_TOUCH]; /*!< Touch_Weight[0], Touch_Weight[1] : weight property of touches */
+ uint8_t touchEventId[TS_MAX_NB_TOUCH]; /*!< Touch_EventId[0], Touch_EventId[1] : take value of type @ref TS_TouchEventTypeDef */
+ uint8_t touchArea[TS_MAX_NB_TOUCH]; /*!< Touch_Area[0], Touch_Area[1] : touch area of each touch */
+ uint32_t gestureId; /*!< type of gesture detected : take value of type @ref TS_GestureIdTypeDef */
+#endif /* TS_MULTI_TOUCH_SUPPORTED == 1 */
+
+} TS_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_TS_Exported_Constants STM32746G_DISCOVERY_TS Exported Constants
+ * @{
+ */
+
+typedef enum
+{
+ TS_OK = 0x00, /*!< Touch Ok */
+ TS_ERROR = 0x01, /*!< Touch Error */
+ TS_TIMEOUT = 0x02, /*!< Touch Timeout */
+ TS_DEVICE_NOT_FOUND = 0x03 /*!< Touchscreen device not found */
+}TS_StatusTypeDef;
+
+/**
+ * @brief TS_GestureIdTypeDef
+ * Define Possible managed gesture identification values returned by touch screen
+ * driver.
+ */
+typedef enum
+{
+ GEST_ID_NO_GESTURE = 0x00, /*!< Gesture not defined / recognized */
+ GEST_ID_MOVE_UP = 0x01, /*!< Gesture Move Up */
+ GEST_ID_MOVE_RIGHT = 0x02, /*!< Gesture Move Right */
+ GEST_ID_MOVE_DOWN = 0x03, /*!< Gesture Move Down */
+ GEST_ID_MOVE_LEFT = 0x04, /*!< Gesture Move Left */
+ GEST_ID_ZOOM_IN = 0x05, /*!< Gesture Zoom In */
+ GEST_ID_ZOOM_OUT = 0x06, /*!< Gesture Zoom Out */
+ GEST_ID_NB_MAX = 0x07 /*!< max number of gesture id */
+
+} TS_GestureIdTypeDef;
+
+/**
+ * @brief TS_TouchEventTypeDef
+ * Define Possible touch events kind as returned values
+ * by touch screen IC Driver.
+ */
+typedef enum
+{
+ TOUCH_EVENT_NO_EVT = 0x00, /*!< Touch Event : undetermined */
+ TOUCH_EVENT_PRESS_DOWN = 0x01, /*!< Touch Event Press Down */
+ TOUCH_EVENT_LIFT_UP = 0x02, /*!< Touch Event Lift Up */
+ TOUCH_EVENT_CONTACT = 0x03, /*!< Touch Event Contact */
+ TOUCH_EVENT_NB_MAX = 0x04 /*!< max number of touch events kind */
+
+} TS_TouchEventTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup STM32746G_DISCOVERY_TS_Imported_Variables STM32746G_DISCOVERY_TS Imported Variables
+ * @{
+ */
+/**
+ * @brief Table for touchscreen event information display on LCD :
+ * table indexed on enum @ref TS_TouchEventTypeDef information
+ */
+extern char * ts_event_string_tab[TOUCH_EVENT_NB_MAX];
+
+/**
+ * @brief Table for touchscreen gesture Id information display on LCD : table indexed
+ * on enum @ref TS_GestureIdTypeDef information
+ */
+extern char * ts_gesture_id_string_tab[GEST_ID_NB_MAX];
+/**
+ * @}
+ */
+
+/** @addtogroup STM32746G_DISCOVERY_TS_Exported_Functions
+ * @{
+ */
+uint8_t BSP_TS_Init(uint16_t ts_SizeX, uint16_t ts_SizeY);
+uint8_t BSP_TS_DeInit(void);
+uint8_t BSP_TS_GetState(TS_StateTypeDef *TS_State);
+
+#if (TS_MULTI_TOUCH_SUPPORTED == 1)
+uint8_t BSP_TS_Get_GestureId(TS_StateTypeDef *TS_State);
+#endif /* TS_MULTI_TOUCH_SUPPORTED == 1 */
+
+uint8_t BSP_TS_ITConfig(void);
+uint8_t BSP_TS_ITGetStatus(void);
+void BSP_TS_ITClear(void);
+uint8_t BSP_TS_ResetTouchData(TS_StateTypeDef *TS_State);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32746G_DISCOVERY_TS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/ts.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,107 @@
+/**
+ ******************************************************************************
+ * @file ts.h
+ * @author MCD Application Team
+ * @version V4.0.0
+ * @date 22-June-2015
+ * @brief This file contains all the functions prototypes for the Touch Screen driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __TS_H
+#define __TS_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include <stdint.h>
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup Components
+ * @{
+ */
+
+/** @addtogroup TS
+ * @{
+ */
+
+/** @defgroup TS_Exported_Types
+ * @{
+ */
+
+/** @defgroup TS_Driver_structure Touch Sensor Driver structure
+ * @{
+ */
+typedef struct
+{
+ void (*Init)(uint16_t);
+ uint16_t (*ReadID)(uint16_t);
+ void (*Reset)(uint16_t);
+ void (*Start)(uint16_t);
+ uint8_t (*DetectTouch)(uint16_t);
+ void (*GetXY)(uint16_t, uint16_t*, uint16_t*);
+ void (*EnableIT)(uint16_t);
+ void (*ClearIT)(uint16_t);
+ uint8_t (*GetITStatus)(uint16_t);
+ void (*DisableIT)(uint16_t);
+}TS_DrvTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/wm8994.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,924 @@
+/**
+ ******************************************************************************
+ * @file wm8994.c
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 24-June-2015
+ * @brief This file provides the WM8994 Audio Codec driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "wm8994.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup Components
+ * @{
+ */
+
+/** @addtogroup wm8994
+ * @brief This file provides a set of functions needed to drive the
+ * WM8994 audio codec.
+ * @{
+ */
+
+/** @defgroup WM8994_Private_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WM8994_Private_Defines
+ * @{
+ */
+/* Uncomment this line to enable verifying data sent to codec after each write
+ operation (for debug purpose) */
+#if !defined (VERIFY_WRITTENDATA)
+/* #define VERIFY_WRITTENDATA */
+#endif /* VERIFY_WRITTENDATA */
+/**
+ * @}
+ */
+
+/** @defgroup WM8994_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WM8994_Private_Variables
+ * @{
+ */
+
+/* Audio codec driver structure initialization */
+AUDIO_DrvTypeDef wm8994_drv =
+{
+ wm8994_Init,
+ wm8994_DeInit,
+ wm8994_ReadID,
+
+ wm8994_Play,
+ wm8994_Pause,
+ wm8994_Resume,
+ wm8994_Stop,
+
+ wm8994_SetFrequency,
+ wm8994_SetVolume,
+ wm8994_SetMute,
+ wm8994_SetOutputMode,
+
+ wm8994_Reset
+};
+
+static uint32_t outputEnabled = 0;
+static uint32_t inputEnabled = 0;
+/**
+ * @}
+ */
+
+/** @defgroup WM8994_Function_Prototypes
+ * @{
+ */
+static uint8_t CODEC_IO_Write(uint8_t Addr, uint16_t Reg, uint16_t Value);
+/**
+ * @}
+ */
+
+/** @defgroup WM8994_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Initializes the audio codec and the control interface.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @param OutputInputDevice: can be OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE,
+ * OUTPUT_DEVICE_BOTH, OUTPUT_DEVICE_AUTO, INPUT_DEVICE_DIGITAL_MICROPHONE_1,
+ * INPUT_DEVICE_DIGITAL_MICROPHONE_2, INPUT_DEVICE_INPUT_LINE_1 or INPUT_DEVICE_INPUT_LINE_2.
+ * @param Volume: Initial volume level (from 0 (Mute) to 100 (Max))
+ * @param AudioFreq: Audio Frequency
+ * @retval 0 if correct communication, else wrong communication
+ */
+uint32_t wm8994_Init(uint16_t DeviceAddr, uint16_t OutputInputDevice, uint8_t Volume, uint32_t AudioFreq)
+{
+ uint32_t counter = 0;
+ uint16_t output_device = OutputInputDevice & 0xFF;
+ uint16_t input_device = OutputInputDevice & 0xFF00;
+ uint16_t power_mgnt_reg_1 = 0;
+
+ /* Initialize the Control interface of the Audio Codec */
+ AUDIO_IO_Init();
+ /* wm8994 Errata Work-Arounds */
+ counter += CODEC_IO_Write(DeviceAddr, 0x102, 0x0003);
+ counter += CODEC_IO_Write(DeviceAddr, 0x817, 0x0000);
+ counter += CODEC_IO_Write(DeviceAddr, 0x102, 0x0000);
+
+ /* Enable VMID soft start (fast), Start-up Bias Current Enabled */
+ counter += CODEC_IO_Write(DeviceAddr, 0x39, 0x006C);
+
+ /* Enable bias generator, Enable VMID */
+ counter += CODEC_IO_Write(DeviceAddr, 0x01, 0x0003);
+
+ /* Add Delay */
+ AUDIO_IO_Delay(50);
+
+ /* Path Configurations for output */
+ if (output_device > 0)
+ {
+ outputEnabled = 1;
+ switch (output_device)
+ {
+ case OUTPUT_DEVICE_SPEAKER:
+ /* Enable DAC1 (Left), Enable DAC1 (Right),
+ Disable DAC2 (Left), Disable DAC2 (Right)*/
+ counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0C0C);
+
+ /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0000);
+
+ /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0000);
+
+ /* Disable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0002);
+
+ /* Disable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0002);
+ break;
+
+ case OUTPUT_DEVICE_HEADPHONE:
+ /* Disable DAC1 (Left), Disable DAC1 (Right),
+ Enable DAC2 (Left), Enable DAC2 (Right)*/
+ counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0303);
+
+ /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0001);
+
+ /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0001);
+
+ /* Disable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0000);
+
+ /* Disable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0000);
+ break;
+
+ case OUTPUT_DEVICE_BOTH:
+ /* Enable DAC1 (Left), Enable DAC1 (Right),
+ also Enable DAC2 (Left), Enable DAC2 (Right)*/
+ counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0303 | 0x0C0C);
+
+ /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0001);
+
+ /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0001);
+
+ /* Enable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0002);
+
+ /* Enable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0002);
+ break;
+
+ case OUTPUT_DEVICE_AUTO :
+ default:
+ /* Disable DAC1 (Left), Disable DAC1 (Right),
+ Enable DAC2 (Left), Enable DAC2 (Right)*/
+ counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0303);
+
+ /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0001);
+
+ /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0001);
+
+ /* Disable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0000);
+
+ /* Disable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0000);
+ break;
+ }
+ }
+ else
+ {
+ outputEnabled = 0;
+ }
+
+ /* Path Configurations for input */
+ if (input_device > 0)
+ {
+ inputEnabled = 1;
+ switch (input_device)
+ {
+ case INPUT_DEVICE_DIGITAL_MICROPHONE_2 :
+ /* Enable AIF1ADC2 (Left), Enable AIF1ADC2 (Right)
+ * Enable DMICDAT2 (Left), Enable DMICDAT2 (Right)
+ * Enable Left ADC, Enable Right ADC */
+ counter += CODEC_IO_Write(DeviceAddr, 0x04, 0x0C30);
+
+ /* Enable AIF1 DRC2 Signal Detect & DRC in AIF1ADC2 Left/Right Timeslot 1 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x450, 0x00DB);
+
+ /* Disable IN1L, IN1R, IN2L, IN2R, Enable Thermal sensor & shutdown */
+ counter += CODEC_IO_Write(DeviceAddr, 0x02, 0x6000);
+
+ /* Enable the DMIC2(Left) to AIF1 Timeslot 1 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x608, 0x0002);
+
+ /* Enable the DMIC2(Right) to AIF1 Timeslot 1 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x609, 0x0002);
+
+ /* GPIO1 pin configuration GP1_DIR = output, GP1_FN = AIF1 DRC2 signal detect */
+ counter += CODEC_IO_Write(DeviceAddr, 0x700, 0x000E);
+ break;
+
+ case INPUT_DEVICE_INPUT_LINE_1 :
+ /* Enable AIF1ADC1 (Left), Enable AIF1ADC1 (Right)
+ * Enable Left ADC, Enable Right ADC */
+ counter += CODEC_IO_Write(DeviceAddr, 0x04, 0x0303);
+
+ /* Enable AIF1 DRC1 Signal Detect & DRC in AIF1ADC1 Left/Right Timeslot 0 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x440, 0x00DB);
+
+ /* Enable IN1L and IN1R, Disable IN2L and IN2R, Enable Thermal sensor & shutdown */
+ counter += CODEC_IO_Write(DeviceAddr, 0x02, 0x6350);
+
+ /* Enable the ADCL(Left) to AIF1 Timeslot 0 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x606, 0x0002);
+
+ /* Enable the ADCR(Right) to AIF1 Timeslot 0 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x607, 0x0002);
+
+ /* GPIO1 pin configuration GP1_DIR = output, GP1_FN = AIF1 DRC1 signal detect */
+ counter += CODEC_IO_Write(DeviceAddr, 0x700, 0x000D);
+ break;
+
+ case INPUT_DEVICE_DIGITAL_MICROPHONE_1 :
+ case INPUT_DEVICE_INPUT_LINE_2 :
+ default:
+ /* Actually, no other input devices supported */
+ counter++;
+ break;
+ }
+ }
+ else
+ {
+ inputEnabled = 0;
+ }
+
+ /* Clock Configurations */
+ switch (AudioFreq)
+ {
+ case AUDIO_FREQUENCY_8K:
+ /* AIF1 Sample Rate = 8 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0003);
+ break;
+
+ case AUDIO_FREQUENCY_16K:
+ /* AIF1 Sample Rate = 16 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0033);
+ break;
+
+ case AUDIO_FREQUENCY_48K:
+ /* AIF1 Sample Rate = 48 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0083);
+ break;
+
+ case AUDIO_FREQUENCY_96K:
+ /* AIF1 Sample Rate = 96 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x00A3);
+ break;
+
+ case AUDIO_FREQUENCY_11K:
+ /* AIF1 Sample Rate = 11.025 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0013);
+ break;
+
+ case AUDIO_FREQUENCY_22K:
+ /* AIF1 Sample Rate = 22.050 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0043);
+ break;
+
+ case AUDIO_FREQUENCY_44K:
+ /* AIF1 Sample Rate = 44.1 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0073);
+ break;
+
+ default:
+ /* AIF1 Sample Rate = 48 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0083);
+ break;
+ }
+ /* AIF1 Word Length = 16-bits, AIF1 Format = I2S (Default Register Value) */
+ counter += CODEC_IO_Write(DeviceAddr, 0x300, 0x4010);
+
+ /* slave mode */
+ counter += CODEC_IO_Write(DeviceAddr, 0x302, 0x0000);
+
+ /* Enable the DSP processing clock for AIF1, Enable the core clock */
+ counter += CODEC_IO_Write(DeviceAddr, 0x208, 0x000A);
+
+ /* Enable AIF1 Clock, AIF1 Clock Source = MCLK1 pin */
+ counter += CODEC_IO_Write(DeviceAddr, 0x200, 0x0001);
+
+ if (output_device > 0) /* Audio output selected */
+ {
+ /* Analog Output Configuration */
+
+ /* Enable SPKRVOL PGA, Enable SPKMIXR, Enable SPKLVOL PGA, Enable SPKMIXL */
+ counter += CODEC_IO_Write(DeviceAddr, 0x03, 0x0300);
+
+ /* Left Speaker Mixer Volume = 0dB */
+ counter += CODEC_IO_Write(DeviceAddr, 0x22, 0x0000);
+
+ /* Speaker output mode = Class D, Right Speaker Mixer Volume = 0dB ((0x23, 0x0100) = class AB)*/
+ counter += CODEC_IO_Write(DeviceAddr, 0x23, 0x0000);
+
+ /* Unmute DAC2 (Left) to Left Speaker Mixer (SPKMIXL) path,
+ Unmute DAC2 (Right) to Right Speaker Mixer (SPKMIXR) path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x36, 0x0300);
+
+ /* Enable bias generator, Enable VMID, Enable SPKOUTL, Enable SPKOUTR */
+ counter += CODEC_IO_Write(DeviceAddr, 0x01, 0x3003);
+
+ /* Headphone/Speaker Enable */
+
+ /* Enable Class W, Class W Envelope Tracking = AIF1 Timeslot 0 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x51, 0x0005);
+
+ /* Enable bias generator, Enable VMID, Enable HPOUT1 (Left) and Enable HPOUT1 (Right) input stages */
+ /* idem for Speaker */
+ power_mgnt_reg_1 |= 0x0303 | 0x3003;
+ counter += CODEC_IO_Write(DeviceAddr, 0x01, power_mgnt_reg_1);
+
+ /* Enable HPOUT1 (Left) and HPOUT1 (Right) intermediate stages */
+ counter += CODEC_IO_Write(DeviceAddr, 0x60, 0x0022);
+
+ /* Enable Charge Pump */
+ counter += CODEC_IO_Write(DeviceAddr, 0x4C, 0x9F25);
+
+ /* Add Delay */
+ AUDIO_IO_Delay(15);
+
+ /* Select DAC1 (Left) to Left Headphone Output PGA (HPOUT1LVOL) path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x2D, 0x0001);
+
+ /* Select DAC1 (Right) to Right Headphone Output PGA (HPOUT1RVOL) path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x2E, 0x0001);
+
+ /* Enable Left Output Mixer (MIXOUTL), Enable Right Output Mixer (MIXOUTR) */
+ /* idem for SPKOUTL and SPKOUTR */
+ counter += CODEC_IO_Write(DeviceAddr, 0x03, 0x0030 | 0x0300);
+
+ /* Enable DC Servo and trigger start-up mode on left and right channels */
+ counter += CODEC_IO_Write(DeviceAddr, 0x54, 0x0033);
+
+ /* Add Delay */
+ AUDIO_IO_Delay(250);
+
+ /* Enable HPOUT1 (Left) and HPOUT1 (Right) intermediate and output stages. Remove clamps */
+ counter += CODEC_IO_Write(DeviceAddr, 0x60, 0x00EE);
+
+ /* Unmutes */
+
+ /* Unmute DAC 1 (Left) */
+ counter += CODEC_IO_Write(DeviceAddr, 0x610, 0x00C0);
+
+ /* Unmute DAC 1 (Right) */
+ counter += CODEC_IO_Write(DeviceAddr, 0x611, 0x00C0);
+
+ /* Unmute the AIF1 Timeslot 0 DAC path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x420, 0x0000);
+
+ /* Unmute DAC 2 (Left) */
+ counter += CODEC_IO_Write(DeviceAddr, 0x612, 0x00C0);
+
+ /* Unmute DAC 2 (Right) */
+ counter += CODEC_IO_Write(DeviceAddr, 0x613, 0x00C0);
+
+ /* Unmute the AIF1 Timeslot 1 DAC2 path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x422, 0x0000);
+
+ /* Volume Control */
+ wm8994_SetVolume(DeviceAddr, Volume);
+ }
+
+ if (input_device > 0) /* Audio input selected */
+ {
+ if ((input_device == INPUT_DEVICE_DIGITAL_MICROPHONE_1) || (input_device == INPUT_DEVICE_DIGITAL_MICROPHONE_2))
+ {
+ /* Enable Microphone bias 1 generator, Enable VMID */
+ power_mgnt_reg_1 |= 0x0013;
+ counter += CODEC_IO_Write(DeviceAddr, 0x01, power_mgnt_reg_1);
+
+ /* ADC oversample enable */
+ counter += CODEC_IO_Write(DeviceAddr, 0x620, 0x0002);
+
+ /* AIF ADC2 HPF enable, HPF cut = voice mode 1 fc=127Hz at fs=8kHz */
+ counter += CODEC_IO_Write(DeviceAddr, 0x411, 0x3800);
+ }
+ else if ((input_device == INPUT_DEVICE_INPUT_LINE_1) || (input_device == INPUT_DEVICE_INPUT_LINE_2))
+ {
+ /* Enable normal bias generator, Enable VMID */
+ power_mgnt_reg_1 |= 0x0003;
+ counter += CODEC_IO_Write(DeviceAddr, 0x01, power_mgnt_reg_1);
+
+ /* Disable mute on IN1L, IN1L Volume = +0dB */
+ counter += CODEC_IO_Write(DeviceAddr, 0x18, 0x000B);
+
+ /* Disable mute on IN1R, IN1R Volume = +0dB */
+ counter += CODEC_IO_Write(DeviceAddr, 0x1A, 0x000B);
+
+ /* Disable mute on IN1L_TO_MIXINL, Gain = +0dB */
+ counter += CODEC_IO_Write(DeviceAddr, 0x29, 0x0025);
+
+ /* Disable mute on IN1R_TO_MIXINL, Gain = +0dB */
+ counter += CODEC_IO_Write(DeviceAddr, 0x2A, 0x0025);
+
+ /* IN1LN_TO_IN1L, IN1LP_TO_VMID, IN1RN_TO_IN1R, IN1RP_TO_VMID */
+ counter += CODEC_IO_Write(DeviceAddr, 0x28, 0x0011);
+
+ /* AIF ADC1 HPF enable, HPF cut = hifi mode fc=4Hz at fs=48kHz */
+ counter += CODEC_IO_Write(DeviceAddr, 0x410, 0x1800);
+ }
+ /* Volume Control */
+ wm8994_SetVolume(DeviceAddr, Volume);
+ }
+ /* Return communication control value */
+ return counter;
+}
+
+/**
+ * @brief Deinitializes the audio codec.
+ * @param None
+ * @retval None
+ */
+void wm8994_DeInit(void)
+{
+ /* Deinitialize Audio Codec interface */
+ AUDIO_IO_DeInit();
+}
+
+/**
+ * @brief Get the WM8994 ID.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @retval The WM8994 ID
+ */
+uint32_t wm8994_ReadID(uint16_t DeviceAddr)
+{
+ /* Initialize the Control interface of the Audio Codec */
+ AUDIO_IO_Init();
+
+ return ((uint32_t)AUDIO_IO_Read(DeviceAddr, WM8994_CHIPID_ADDR));
+}
+
+/**
+ * @brief Start the audio Codec play feature.
+ * @note For this codec no Play options are required.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @retval 0 if correct communication, else wrong communication
+ */
+uint32_t wm8994_Play(uint16_t DeviceAddr, uint16_t* pBuffer, uint16_t Size)
+{
+ uint32_t counter = 0;
+
+ /* Resumes the audio file playing */
+ /* Unmute the output first */
+ counter += wm8994_SetMute(DeviceAddr, AUDIO_MUTE_OFF);
+
+ return counter;
+}
+
+/**
+ * @brief Pauses playing on the audio codec.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @retval 0 if correct communication, else wrong communication
+ */
+uint32_t wm8994_Pause(uint16_t DeviceAddr)
+{
+ uint32_t counter = 0;
+
+ /* Pause the audio file playing */
+ /* Mute the output first */
+ counter += wm8994_SetMute(DeviceAddr, AUDIO_MUTE_ON);
+
+ /* Put the Codec in Power save mode */
+ counter += CODEC_IO_Write(DeviceAddr, 0x02, 0x01);
+
+ return counter;
+}
+
+/**
+ * @brief Resumes playing on the audio codec.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @retval 0 if correct communication, else wrong communication
+ */
+uint32_t wm8994_Resume(uint16_t DeviceAddr)
+{
+ uint32_t counter = 0;
+
+ /* Resumes the audio file playing */
+ /* Unmute the output first */
+ counter += wm8994_SetMute(DeviceAddr, AUDIO_MUTE_OFF);
+
+ return counter;
+}
+
+/**
+ * @brief Stops audio Codec playing. It powers down the codec.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @param CodecPdwnMode: selects the power down mode.
+ * - CODEC_PDWN_SW: only mutes the audio codec. When resuming from this
+ * mode the codec keeps the previous initialization
+ * (no need to re-Initialize the codec registers).
+ * - CODEC_PDWN_HW: Physically power down the codec. When resuming from this
+ * mode, the codec is set to default configuration
+ * (user should re-Initialize the codec in order to
+ * play again the audio stream).
+ * @retval 0 if correct communication, else wrong communication
+ */
+uint32_t wm8994_Stop(uint16_t DeviceAddr, uint32_t CodecPdwnMode)
+{
+ uint32_t counter = 0;
+
+ if (outputEnabled != 0)
+ {
+ /* Mute the output first */
+ counter += wm8994_SetMute(DeviceAddr, AUDIO_MUTE_ON);
+
+ if (CodecPdwnMode == CODEC_PDWN_SW)
+ {
+ /* Only output mute required*/
+ }
+ else /* CODEC_PDWN_HW */
+ {
+ /* Mute the AIF1 Timeslot 0 DAC1 path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x420, 0x0200);
+
+ /* Mute the AIF1 Timeslot 1 DAC2 path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x422, 0x0200);
+
+ /* Disable DAC1L_TO_HPOUT1L */
+ counter += CODEC_IO_Write(DeviceAddr, 0x2D, 0x0000);
+
+ /* Disable DAC1R_TO_HPOUT1R */
+ counter += CODEC_IO_Write(DeviceAddr, 0x2E, 0x0000);
+
+ /* Disable DAC1 and DAC2 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0000);
+
+ /* Reset Codec by writing in 0x0000 address register */
+ counter += CODEC_IO_Write(DeviceAddr, 0x0000, 0x0000);
+
+ outputEnabled = 0;
+ }
+ }
+ return counter;
+}
+
+/**
+ * @brief Sets higher or lower the codec volume level.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @param Volume: a byte value from 0 to 255 (refer to codec registers
+ * description for more details).
+ * @retval 0 if correct communication, else wrong communication
+ */
+uint32_t wm8994_SetVolume(uint16_t DeviceAddr, uint8_t Volume)
+{
+ uint32_t counter = 0;
+ uint8_t convertedvol = VOLUME_CONVERT(Volume);
+
+ /* Output volume */
+ if (outputEnabled != 0)
+ {
+ if(convertedvol > 0x3E)
+ {
+ /* Unmute audio codec */
+ counter += wm8994_SetMute(DeviceAddr, AUDIO_MUTE_OFF);
+
+ /* Left Headphone Volume */
+ counter += CODEC_IO_Write(DeviceAddr, 0x1C, 0x3F | 0x140);
+
+ /* Right Headphone Volume */
+ counter += CODEC_IO_Write(DeviceAddr, 0x1D, 0x3F | 0x140);
+
+ /* Left Speaker Volume */
+ counter += CODEC_IO_Write(DeviceAddr, 0x26, 0x3F | 0x140);
+
+ /* Right Speaker Volume */
+ counter += CODEC_IO_Write(DeviceAddr, 0x27, 0x3F | 0x140);
+ }
+ else if (Volume == 0)
+ {
+ /* Mute audio codec */
+ counter += wm8994_SetMute(DeviceAddr, AUDIO_MUTE_ON);
+ }
+ else
+ {
+ /* Unmute audio codec */
+ counter += wm8994_SetMute(DeviceAddr, AUDIO_MUTE_OFF);
+
+ /* Left Headphone Volume */
+ counter += CODEC_IO_Write(DeviceAddr, 0x1C, convertedvol | 0x140);
+
+ /* Right Headphone Volume */
+ counter += CODEC_IO_Write(DeviceAddr, 0x1D, convertedvol | 0x140);
+
+ /* Left Speaker Volume */
+ counter += CODEC_IO_Write(DeviceAddr, 0x26, convertedvol | 0x140);
+
+ /* Right Speaker Volume */
+ counter += CODEC_IO_Write(DeviceAddr, 0x27, convertedvol | 0x140);
+ }
+ }
+
+ /* Input volume */
+ if (inputEnabled != 0)
+ {
+ convertedvol = VOLUME_IN_CONVERT(Volume);
+
+ /* Left AIF1 ADC1 volume */
+ counter += CODEC_IO_Write(DeviceAddr, 0x400, convertedvol | 0x100);
+
+ /* Right AIF1 ADC1 volume */
+ counter += CODEC_IO_Write(DeviceAddr, 0x401, convertedvol | 0x100);
+
+ /* Left AIF1 ADC2 volume */
+ counter += CODEC_IO_Write(DeviceAddr, 0x404, convertedvol | 0x100);
+
+ /* Right AIF1 ADC2 volume */
+ counter += CODEC_IO_Write(DeviceAddr, 0x405, convertedvol | 0x100);
+ }
+ return counter;
+}
+
+/**
+ * @brief Enables or disables the mute feature on the audio codec.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @param Cmd: AUDIO_MUTE_ON to enable the mute or AUDIO_MUTE_OFF to disable the
+ * mute mode.
+ * @retval 0 if correct communication, else wrong communication
+ */
+uint32_t wm8994_SetMute(uint16_t DeviceAddr, uint32_t Cmd)
+{
+ uint32_t counter = 0;
+
+ if (outputEnabled != 0)
+ {
+ /* Set the Mute mode */
+ if(Cmd == AUDIO_MUTE_ON)
+ {
+ /* Soft Mute the AIF1 Timeslot 0 DAC1 path L&R */
+ counter += CODEC_IO_Write(DeviceAddr, 0x420, 0x0200);
+
+ /* Soft Mute the AIF1 Timeslot 1 DAC2 path L&R */
+ counter += CODEC_IO_Write(DeviceAddr, 0x422, 0x0200);
+ }
+ else /* AUDIO_MUTE_OFF Disable the Mute */
+ {
+ /* Unmute the AIF1 Timeslot 0 DAC1 path L&R */
+ counter += CODEC_IO_Write(DeviceAddr, 0x420, 0x0000);
+
+ /* Unmute the AIF1 Timeslot 1 DAC2 path L&R */
+ counter += CODEC_IO_Write(DeviceAddr, 0x422, 0x0000);
+ }
+ }
+ return counter;
+}
+
+/**
+ * @brief Switch dynamically (while audio file is played) the output target
+ * (speaker or headphone).
+ * @param DeviceAddr: Device address on communication Bus.
+ * @param Output: specifies the audio output target: OUTPUT_DEVICE_SPEAKER,
+ * OUTPUT_DEVICE_HEADPHONE, OUTPUT_DEVICE_BOTH or OUTPUT_DEVICE_AUTO
+ * @retval 0 if correct communication, else wrong communication
+ */
+uint32_t wm8994_SetOutputMode(uint16_t DeviceAddr, uint8_t Output)
+{
+ uint32_t counter = 0;
+
+ switch (Output)
+ {
+ case OUTPUT_DEVICE_SPEAKER:
+ /* Enable DAC1 (Left), Enable DAC1 (Right),
+ Disable DAC2 (Left), Disable DAC2 (Right)*/
+ counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0C0C);
+
+ /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0000);
+
+ /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0000);
+
+ /* Disable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0002);
+
+ /* Disable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0002);
+ break;
+
+ case OUTPUT_DEVICE_HEADPHONE:
+ /* Disable DAC1 (Left), Disable DAC1 (Right),
+ Enable DAC2 (Left), Enable DAC2 (Right)*/
+ counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0303);
+
+ /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0001);
+
+ /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0001);
+
+ /* Disable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0000);
+
+ /* Disable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0000);
+ break;
+
+ case OUTPUT_DEVICE_BOTH:
+ /* Enable DAC1 (Left), Enable DAC1 (Right),
+ also Enable DAC2 (Left), Enable DAC2 (Right)*/
+ counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0303 | 0x0C0C);
+
+ /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0001);
+
+ /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0001);
+
+ /* Enable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0002);
+
+ /* Enable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0002);
+ break;
+
+ default:
+ /* Disable DAC1 (Left), Disable DAC1 (Right),
+ Enable DAC2 (Left), Enable DAC2 (Right)*/
+ counter += CODEC_IO_Write(DeviceAddr, 0x05, 0x0303);
+
+ /* Enable the AIF1 Timeslot 0 (Left) to DAC 1 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x601, 0x0001);
+
+ /* Enable the AIF1 Timeslot 0 (Right) to DAC 1 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x602, 0x0001);
+
+ /* Disable the AIF1 Timeslot 1 (Left) to DAC 2 (Left) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x604, 0x0000);
+
+ /* Disable the AIF1 Timeslot 1 (Right) to DAC 2 (Right) mixer path */
+ counter += CODEC_IO_Write(DeviceAddr, 0x605, 0x0000);
+ break;
+ }
+ return counter;
+}
+
+/**
+ * @brief Sets new frequency.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @param AudioFreq: Audio frequency used to play the audio stream.
+ * @retval 0 if correct communication, else wrong communication
+ */
+uint32_t wm8994_SetFrequency(uint16_t DeviceAddr, uint32_t AudioFreq)
+{
+ uint32_t counter = 0;
+
+ /* Clock Configurations */
+ switch (AudioFreq)
+ {
+ case AUDIO_FREQUENCY_8K:
+ /* AIF1 Sample Rate = 8 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0003);
+ break;
+
+ case AUDIO_FREQUENCY_16K:
+ /* AIF1 Sample Rate = 16 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0033);
+ break;
+
+ case AUDIO_FREQUENCY_48K:
+ /* AIF1 Sample Rate = 48 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0083);
+ break;
+
+ case AUDIO_FREQUENCY_96K:
+ /* AIF1 Sample Rate = 96 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x00A3);
+ break;
+
+ case AUDIO_FREQUENCY_11K:
+ /* AIF1 Sample Rate = 11.025 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0013);
+ break;
+
+ case AUDIO_FREQUENCY_22K:
+ /* AIF1 Sample Rate = 22.050 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0043);
+ break;
+
+ case AUDIO_FREQUENCY_44K:
+ /* AIF1 Sample Rate = 44.1 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0073);
+ break;
+
+ default:
+ /* AIF1 Sample Rate = 48 (KHz), ratio=256 */
+ counter += CODEC_IO_Write(DeviceAddr, 0x210, 0x0083);
+ break;
+ }
+ return counter;
+}
+
+/**
+ * @brief Resets wm8994 registers.
+ * @param DeviceAddr: Device address on communication Bus.
+ * @retval 0 if correct communication, else wrong communication
+ */
+uint32_t wm8994_Reset(uint16_t DeviceAddr)
+{
+ uint32_t counter = 0;
+
+ /* Reset Codec by writing in 0x0000 address register */
+ counter = CODEC_IO_Write(DeviceAddr, 0x0000, 0x0000);
+ outputEnabled = 0;
+ inputEnabled=0;
+
+ return counter;
+}
+
+/**
+ * @brief Writes/Read a single data.
+ * @param Addr: I2C address
+ * @param Reg: Reg address
+ * @param Value: Data to be written
+ * @retval None
+ */
+static uint8_t CODEC_IO_Write(uint8_t Addr, uint16_t Reg, uint16_t Value)
+{
+ uint32_t result = 0;
+
+ AUDIO_IO_Write(Addr, Reg, Value);
+
+#ifdef VERIFY_WRITTENDATA
+ /* Verify that the data has been correctly written */
+ result = (AUDIO_IO_Read(Addr, Reg) == Value)? 0:1;
+#endif /* VERIFY_WRITTENDATA */
+
+ return result;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/wm8994.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,187 @@
+/**
+ ******************************************************************************
+ * @file wm8994.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 24-June-2015
+ * @brief This file contains all the functions prototypes for the
+ * wm8994.c driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __WM8994_H
+#define __WM8994_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "audio.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup Component
+ * @{
+ */
+
+/** @addtogroup WM8994
+ * @{
+ */
+
+/** @defgroup WM8994_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WM8994_Exported_Constants
+ * @{
+ */
+
+/******************************************************************************/
+/*************************** Codec User defines ******************************/
+/******************************************************************************/
+/* Codec output DEVICE */
+#define OUTPUT_DEVICE_SPEAKER ((uint16_t)0x0001)
+#define OUTPUT_DEVICE_HEADPHONE ((uint16_t)0x0002)
+#define OUTPUT_DEVICE_BOTH ((uint16_t)0x0003)
+#define OUTPUT_DEVICE_AUTO ((uint16_t)0x0004)
+#define INPUT_DEVICE_DIGITAL_MICROPHONE_1 ((uint16_t)0x0100)
+#define INPUT_DEVICE_DIGITAL_MICROPHONE_2 ((uint16_t)0x0200)
+#define INPUT_DEVICE_INPUT_LINE_1 ((uint16_t)0x0300)
+#define INPUT_DEVICE_INPUT_LINE_2 ((uint16_t)0x0400)
+
+/* Volume Levels values */
+#define DEFAULT_VOLMIN 0x00
+#define DEFAULT_VOLMAX 0xFF
+#define DEFAULT_VOLSTEP 0x04
+
+#define AUDIO_PAUSE 0
+#define AUDIO_RESUME 1
+
+/* Codec POWER DOWN modes */
+#define CODEC_PDWN_HW 1
+#define CODEC_PDWN_SW 2
+
+/* MUTE commands */
+#define AUDIO_MUTE_ON 1
+#define AUDIO_MUTE_OFF 0
+
+/* AUDIO FREQUENCY */
+#define AUDIO_FREQUENCY_192K ((uint32_t)192000)
+#define AUDIO_FREQUENCY_96K ((uint32_t)96000)
+#define AUDIO_FREQUENCY_48K ((uint32_t)48000)
+#define AUDIO_FREQUENCY_44K ((uint32_t)44100)
+#define AUDIO_FREQUENCY_32K ((uint32_t)32000)
+#define AUDIO_FREQUENCY_22K ((uint32_t)22050)
+#define AUDIO_FREQUENCY_16K ((uint32_t)16000)
+#define AUDIO_FREQUENCY_11K ((uint32_t)11025)
+#define AUDIO_FREQUENCY_8K ((uint32_t)8000)
+
+#define VOLUME_CONVERT(Volume) (((Volume) > 100)? 100:((uint8_t)(((Volume) * 63) / 100)))
+#define VOLUME_IN_CONVERT(Volume) (((Volume) >= 100)? 239:((uint8_t)(((Volume) * 240) / 100)))
+
+/******************************************************************************/
+/****************************** REGISTER MAPPING ******************************/
+/******************************************************************************/
+/**
+ * @brief WM8994 ID
+ */
+#define WM8994_ID 0x8994
+
+/**
+ * @brief Device ID Register: Reading from this register will indicate device
+ * family ID 8994h
+ */
+#define WM8994_CHIPID_ADDR 0x00
+
+/**
+ * @}
+ */
+
+/** @defgroup WM8994_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup WM8994_Exported_Functions
+ * @{
+ */
+
+/*------------------------------------------------------------------------------
+ Audio Codec functions
+------------------------------------------------------------------------------*/
+/* High Layer codec functions */
+uint32_t wm8994_Init(uint16_t DeviceAddr, uint16_t OutputInputDevice, uint8_t Volume, uint32_t AudioFreq);
+void wm8994_DeInit(void);
+uint32_t wm8994_ReadID(uint16_t DeviceAddr);
+uint32_t wm8994_Play(uint16_t DeviceAddr, uint16_t* pBuffer, uint16_t Size);
+uint32_t wm8994_Pause(uint16_t DeviceAddr);
+uint32_t wm8994_Resume(uint16_t DeviceAddr);
+uint32_t wm8994_Stop(uint16_t DeviceAddr, uint32_t Cmd);
+uint32_t wm8994_SetVolume(uint16_t DeviceAddr, uint8_t Volume);
+uint32_t wm8994_SetMute(uint16_t DeviceAddr, uint32_t Cmd);
+uint32_t wm8994_SetOutputMode(uint16_t DeviceAddr, uint8_t Output);
+uint32_t wm8994_SetFrequency(uint16_t DeviceAddr, uint32_t AudioFreq);
+uint32_t wm8994_Reset(uint16_t DeviceAddr);
+
+/* AUDIO IO functions */
+void AUDIO_IO_Init(void);
+void AUDIO_IO_DeInit(void);
+void AUDIO_IO_Write(uint8_t Addr, uint16_t Reg, uint16_t Value);
+uint8_t AUDIO_IO_Read(uint8_t Addr, uint16_t Reg);
+void AUDIO_IO_Delay(uint32_t Delay);
+
+/* Audio driver structure */
+extern AUDIO_DrvTypeDef wm8994_drv;
+
+#endif /* __WM8994_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/LCD_DISCO_F746NG.lib Thu Apr 19 19:59:54 2018 +0000 @@ -0,0 +1,1 @@ +http://os.mbed.com/teams/ST/code/LCD_DISCO_F746NG/#d44525b1de98
--- a/SDFileSystem.lib Wed Apr 13 09:54:35 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1 +0,0 @@ -https://developer.mbed.org/users/DieterGraef/code/SDFileSystem/#8f15aa3b052b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/SDFileSystem/FATFileSystem.lib Thu Apr 19 19:59:54 2018 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/teams/mbed-official/code/FATFileSystem/#094f84646b9f
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SDFileSystem/SDCRC.cpp Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,119 @@
+/* SD/MMC File System Library
+ * Copyright (c) 2016 Neil Thiessen
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "SDCRC.h"
+
+namespace SDCRC
+{
+
+namespace
+{
+const char m_Crc7Table[] = {
+ 0x00, 0x09, 0x12, 0x1B, 0x24, 0x2D, 0x36, 0x3F,
+ 0x48, 0x41, 0x5A, 0x53, 0x6C, 0x65, 0x7E, 0x77,
+ 0x19, 0x10, 0x0B, 0x02, 0x3D, 0x34, 0x2F, 0x26,
+ 0x51, 0x58, 0x43, 0x4A, 0x75, 0x7C, 0x67, 0x6E,
+ 0x32, 0x3B, 0x20, 0x29, 0x16, 0x1F, 0x04, 0x0D,
+ 0x7A, 0x73, 0x68, 0x61, 0x5E, 0x57, 0x4C, 0x45,
+ 0x2B, 0x22, 0x39, 0x30, 0x0F, 0x06, 0x1D, 0x14,
+ 0x63, 0x6A, 0x71, 0x78, 0x47, 0x4E, 0x55, 0x5C,
+ 0x64, 0x6D, 0x76, 0x7F, 0x40, 0x49, 0x52, 0x5B,
+ 0x2C, 0x25, 0x3E, 0x37, 0x08, 0x01, 0x1A, 0x13,
+ 0x7D, 0x74, 0x6F, 0x66, 0x59, 0x50, 0x4B, 0x42,
+ 0x35, 0x3C, 0x27, 0x2E, 0x11, 0x18, 0x03, 0x0A,
+ 0x56, 0x5F, 0x44, 0x4D, 0x72, 0x7B, 0x60, 0x69,
+ 0x1E, 0x17, 0x0C, 0x05, 0x3A, 0x33, 0x28, 0x21,
+ 0x4F, 0x46, 0x5D, 0x54, 0x6B, 0x62, 0x79, 0x70,
+ 0x07, 0x0E, 0x15, 0x1C, 0x23, 0x2A, 0x31, 0x38,
+ 0x41, 0x48, 0x53, 0x5A, 0x65, 0x6C, 0x77, 0x7E,
+ 0x09, 0x00, 0x1B, 0x12, 0x2D, 0x24, 0x3F, 0x36,
+ 0x58, 0x51, 0x4A, 0x43, 0x7C, 0x75, 0x6E, 0x67,
+ 0x10, 0x19, 0x02, 0x0B, 0x34, 0x3D, 0x26, 0x2F,
+ 0x73, 0x7A, 0x61, 0x68, 0x57, 0x5E, 0x45, 0x4C,
+ 0x3B, 0x32, 0x29, 0x20, 0x1F, 0x16, 0x0D, 0x04,
+ 0x6A, 0x63, 0x78, 0x71, 0x4E, 0x47, 0x5C, 0x55,
+ 0x22, 0x2B, 0x30, 0x39, 0x06, 0x0F, 0x14, 0x1D,
+ 0x25, 0x2C, 0x37, 0x3E, 0x01, 0x08, 0x13, 0x1A,
+ 0x6D, 0x64, 0x7F, 0x76, 0x49, 0x40, 0x5B, 0x52,
+ 0x3C, 0x35, 0x2E, 0x27, 0x18, 0x11, 0x0A, 0x03,
+ 0x74, 0x7D, 0x66, 0x6F, 0x50, 0x59, 0x42, 0x4B,
+ 0x17, 0x1E, 0x05, 0x0C, 0x33, 0x3A, 0x21, 0x28,
+ 0x5F, 0x56, 0x4D, 0x44, 0x7B, 0x72, 0x69, 0x60,
+ 0x0E, 0x07, 0x1C, 0x15, 0x2A, 0x23, 0x38, 0x31,
+ 0x46, 0x4F, 0x54, 0x5D, 0x62, 0x6B, 0x70, 0x79
+};
+
+const unsigned short m_Crc16Table[256] = {
+ 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50A5, 0x60C6, 0x70E7,
+ 0x8108, 0x9129, 0xA14A, 0xB16B, 0xC18C, 0xD1AD, 0xE1CE, 0xF1EF,
+ 0x1231, 0x0210, 0x3273, 0x2252, 0x52B5, 0x4294, 0x72F7, 0x62D6,
+ 0x9339, 0x8318, 0xB37B, 0xA35A, 0xD3BD, 0xC39C, 0xF3FF, 0xE3DE,
+ 0x2462, 0x3443, 0x0420, 0x1401, 0x64E6, 0x74C7, 0x44A4, 0x5485,
+ 0xA56A, 0xB54B, 0x8528, 0x9509, 0xE5EE, 0xF5CF, 0xC5AC, 0xD58D,
+ 0x3653, 0x2672, 0x1611, 0x0630, 0x76D7, 0x66F6, 0x5695, 0x46B4,
+ 0xB75B, 0xA77A, 0x9719, 0x8738, 0xF7DF, 0xE7FE, 0xD79D, 0xC7BC,
+ 0x48C4, 0x58E5, 0x6886, 0x78A7, 0x0840, 0x1861, 0x2802, 0x3823,
+ 0xC9CC, 0xD9ED, 0xE98E, 0xF9AF, 0x8948, 0x9969, 0xA90A, 0xB92B,
+ 0x5AF5, 0x4AD4, 0x7AB7, 0x6A96, 0x1A71, 0x0A50, 0x3A33, 0x2A12,
+ 0xDBFD, 0xCBDC, 0xFBBF, 0xEB9E, 0x9B79, 0x8B58, 0xBB3B, 0xAB1A,
+ 0x6CA6, 0x7C87, 0x4CE4, 0x5CC5, 0x2C22, 0x3C03, 0x0C60, 0x1C41,
+ 0xEDAE, 0xFD8F, 0xCDEC, 0xDDCD, 0xAD2A, 0xBD0B, 0x8D68, 0x9D49,
+ 0x7E97, 0x6EB6, 0x5ED5, 0x4EF4, 0x3E13, 0x2E32, 0x1E51, 0x0E70,
+ 0xFF9F, 0xEFBE, 0xDFDD, 0xCFFC, 0xBF1B, 0xAF3A, 0x9F59, 0x8F78,
+ 0x9188, 0x81A9, 0xB1CA, 0xA1EB, 0xD10C, 0xC12D, 0xF14E, 0xE16F,
+ 0x1080, 0x00A1, 0x30C2, 0x20E3, 0x5004, 0x4025, 0x7046, 0x6067,
+ 0x83B9, 0x9398, 0xA3FB, 0xB3DA, 0xC33D, 0xD31C, 0xE37F, 0xF35E,
+ 0x02B1, 0x1290, 0x22F3, 0x32D2, 0x4235, 0x5214, 0x6277, 0x7256,
+ 0xB5EA, 0xA5CB, 0x95A8, 0x8589, 0xF56E, 0xE54F, 0xD52C, 0xC50D,
+ 0x34E2, 0x24C3, 0x14A0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
+ 0xA7DB, 0xB7FA, 0x8799, 0x97B8, 0xE75F, 0xF77E, 0xC71D, 0xD73C,
+ 0x26D3, 0x36F2, 0x0691, 0x16B0, 0x6657, 0x7676, 0x4615, 0x5634,
+ 0xD94C, 0xC96D, 0xF90E, 0xE92F, 0x99C8, 0x89E9, 0xB98A, 0xA9AB,
+ 0x5844, 0x4865, 0x7806, 0x6827, 0x18C0, 0x08E1, 0x3882, 0x28A3,
+ 0xCB7D, 0xDB5C, 0xEB3F, 0xFB1E, 0x8BF9, 0x9BD8, 0xABBB, 0xBB9A,
+ 0x4A75, 0x5A54, 0x6A37, 0x7A16, 0x0AF1, 0x1AD0, 0x2AB3, 0x3A92,
+ 0xFD2E, 0xED0F, 0xDD6C, 0xCD4D, 0xBDAA, 0xAD8B, 0x9DE8, 0x8DC9,
+ 0x7C26, 0x6C07, 0x5C64, 0x4C45, 0x3CA2, 0x2C83, 0x1CE0, 0x0CC1,
+ 0xEF1F, 0xFF3E, 0xCF5D, 0xDF7C, 0xAF9B, 0xBFBA, 0x8FD9, 0x9FF8,
+ 0x6E17, 0x7E36, 0x4E55, 0x5E74, 0x2E93, 0x3EB2, 0x0ED1, 0x1EF0
+};
+}
+
+char crc7(const char* data, int length)
+{
+ //Calculate the CRC7 checksum for the specified data block
+ char crc = 0;
+ for (int i = 0; i < length; i++) {
+ crc = m_Crc7Table[(crc << 1) ^ data[i]];
+ }
+
+ //Return the calculated checksum
+ return crc;
+}
+
+unsigned short crc16(const char* data, int length)
+{
+ //Calculate the CRC16 checksum for the specified data block
+ unsigned short crc = 0;
+ for (int i = 0; i < length; i++) {
+ crc = (crc << 8) ^ m_Crc16Table[((crc >> 8) ^ data[i]) & 0x00FF];
+ }
+
+ //Return the calculated checksum
+ return crc;
+}
+
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SDFileSystem/SDCRC.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,30 @@
+/* SD/MMC File System Library
+ * Copyright (c) 2016 Neil Thiessen
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SD_CRC_H
+#define SD_CRC_H
+
+#include "mbed.h"
+
+namespace SDCRC
+{
+
+char crc7(const char* data, int length);
+unsigned short crc16(const char* data, int length);
+
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SDFileSystem/SDFileSystem.cpp Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,351 @@
+/* SD/MMC File System Library
+ * Copyright (c) 2016 Neil Thiessen
+ * Modified for the use with STM32F746 Discovery (C) 2016 Dieter Greaf
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "SDFileSystem.h"
+#include "diskio.h"
+#include "SDCRC.h"
+//for cache flush function
+#include "SD_Helper.h"
+
+SDFileSystem::SDFileSystem( const char* name)
+ : FATFileSystem(name), m_Cd(PC_13)
+{
+ //Initialize the member variables
+ uint8_t initstat;
+ void* h;
+ m_CardType = CARD_NONE;
+ m_Crc = true;
+ m_LargeFrames = false;
+ m_WriteValidation = true;
+ m_Status = STA_NOINIT;
+ m_Cd.mode(PullUp);
+ m_CdAssert = 0;
+ m_Cd.rise(this, &SDFileSystem::onCardRemoval);
+ h=(void*)&SDFileSystem::DMA2_Stream3_IRQHandler;
+ NVIC_SetVector(DMA2_Stream3_IRQn,(uint32_t)h);
+ h=(void*)&SDFileSystem::DMA2_Stream6_IRQHandler;
+ NVIC_SetVector(DMA2_Stream6_IRQn,(uint32_t)h);
+ h=(void*)&SDFileSystem::SDMMC1_IRQHandler;
+ NVIC_SetVector(SDMMC1_IRQn,(uint32_t)h);
+ BSP_SD_Clear_Busy();
+ initstat=BSP_SD_Init();
+ if (initstat!=MSD_OK)
+ {
+ m_Status |= STA_NOINIT;
+ }
+ else
+ {
+ m_Status &= ~STA_NOINIT;
+ }
+}
+
+bool SDFileSystem::card_present()
+{
+ //Check the card socket
+ checkSocket();
+
+ //Return whether or not a card is present
+ return !(m_Status & STA_NODISK);
+}
+
+SDFileSystem::CardType SDFileSystem::card_type()
+{
+ //Check the card socket
+ checkSocket();
+
+ //Return the card type
+ return m_CardType;
+}
+
+bool SDFileSystem::crc()
+{
+ //Return whether or not CRC is enabled
+ return m_Crc;
+}
+
+void SDFileSystem::crc(bool enabled)
+{
+ //Check the card socket
+ checkSocket();
+
+ //Just update the member variable if the card isn't initialized
+ if (m_Status & STA_NOINIT) {
+ m_Crc = enabled;
+ return;
+ }
+
+ //Enable or disable CRC
+ if (enabled && !m_Crc) {
+ //Send CMD59(0x00000001) to enable CRC
+ m_Crc = true;
+ BSP_SD_CommandTransaction(CMD59, 0x00000001);
+ } else if (!enabled && m_Crc) {
+ //Send CMD59(0x00000000) to disableAPP/MBED/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG CRC
+ BSP_SD_CommandTransaction(CMD59, 0x00000000);
+ m_Crc = false;
+ }
+}
+
+bool SDFileSystem::large_frames()
+{
+ //Return whether or not 16-bit frames are enabled
+ return m_LargeFrames;
+}
+
+void SDFileSystem::large_frames(bool enabled)
+{
+ //Set whether or not 16-bit frames are enabled
+ m_LargeFrames = enabled;
+}
+
+bool SDFileSystem::write_validation()
+{
+ //Return whether or not write validation is enabled
+ return m_WriteValidation;
+}
+
+void SDFileSystem::write_validation(bool enabled)
+{
+ //Set whether or not write validation is enabled
+ m_WriteValidation = enabled;
+}
+
+int SDFileSystem::unmount()
+{
+ //Unmount the filesystem
+ FATFileSystem::unmount();
+
+ //Change the status to not initialized, and the card type to unknown
+ m_Status |= STA_NOINIT;
+ m_CardType = CARD_UNKNOWN;
+
+ //Always succeeds
+ return 0;
+}
+
+int SDFileSystem::disk_initialize()
+{
+
+ //Make sure there's a card in the socket before proceeding
+ checkSocket();
+ if (m_Status & STA_NODISK)
+ return m_Status;
+ BSP_SD_GetCardInfo(&m_CardInfo);
+
+ switch(m_CardInfo.CardType)
+ {
+ case STD_CAPACITY_SD_CARD_V1_1:
+ { m_CardType = CARD_SD;
+ break; }
+ case STD_CAPACITY_SD_CARD_V2_0:
+ { m_CardType = CARD_SD;
+ break; }
+ case HIGH_CAPACITY_SD_CARD:
+ { m_CardType = CARD_SDHC;
+ break; }
+ case MULTIMEDIA_CARD:
+ { m_CardType = CARD_MMC;
+ break; }
+ case SECURE_DIGITAL_IO_CARD:
+ { m_CardType = CARD_SD;
+ break; }
+ case HIGH_SPEED_MULTIMEDIA_CARD:
+ { m_CardType = CARD_MMC;
+ break; }
+ case SECURE_DIGITAL_IO_COMBO_CARD:
+ { m_CardType = CARD_SD;
+ break; }
+ case HIGH_CAPACITY_MMC_CARD:
+ { m_CardType = CARD_MMC;
+ break; }
+ default:
+ {m_CardType = CARD_UNKNOWN;
+ return m_Status;}
+ }
+ //The card is now initialized
+ m_Status &= ~STA_NOINIT;
+
+ //Return the disk status
+ return m_Status;
+}
+
+int SDFileSystem::disk_status()
+{
+ //Check the card socket
+ checkSocket();
+
+ //Return the disk status
+ return m_Status;
+}
+
+int SDFileSystem::disk_read(uint8_t* buffer, uint32_t sector, uint32_t count)
+{
+ int retval;
+ //Make sure the card is initialized before proceeding
+ if (m_Status & STA_NOINIT)
+ return RES_NOTRDY;
+ __DSB();
+ __ISB();
+ while(BSP_SD_Get_Busy()==1){;}
+ BSP_SD_Set_Busy();
+ //Read a single block, or multiple blocks
+ if (count > 1) {
+ BSP_SD_Set_RX_Busy();
+ SCB_InvalidateDCache_by_Addr((uint32_t *)buffer,(512*count));
+ retval=BSP_SD_ReadBlocks_DMA((uint32_t *)buffer, (uint64_t) (sector * 512),512, count);
+ while((BSP_SD_Get_RX_Busy()==1)&&(retval==MSD_OK)){;}
+ CPU_CACHE_Flush((uint32_t *)buffer,(512*count));
+ BSP_SD_Clear_Busy();
+ return (retval ? RES_ERROR : RES_OK);
+ } else {
+ BSP_SD_Set_RX_Busy();
+ SCB_InvalidateDCache_by_Addr((uint32_t *)buffer,(512));
+ retval= BSP_SD_ReadBlocks_DMA((uint32_t *)buffer, (uint64_t) (sector * 512), 512, 1);
+ while((BSP_SD_Get_RX_Busy()==1)&&(retval==MSD_OK)){;}
+ CPU_CACHE_Flush((uint32_t *)buffer,(512));
+ BSP_SD_Clear_Busy();
+ return (retval ? RES_ERROR : RES_OK);
+ }
+}
+
+int SDFileSystem::disk_write(const uint8_t* buffer, uint32_t sector, uint32_t count)
+{
+ int retval;
+ //Make sure the card is initialized before proceeding
+ if (m_Status & STA_NOINIT)
+ return RES_NOTRDY;
+ __DSB();
+ __ISB();
+ while(BSP_SD_Get_Busy()==1){;}
+ BSP_SD_Set_Busy();
+ //Make sure the card isn't write protected before proceeding
+ if (m_Status & STA_PROTECT)
+ {
+ BSP_SD_Clear_Busy();
+ return RES_WRPRT;
+ }
+ //Write a single block, or multiple blocks
+ if (count > 1) {
+ CPU_CACHE_Flush((uint32_t *)buffer,(512*count));
+ BSP_SD_Set_TX_Busy();
+ retval= BSP_SD_WriteBlocks_DMA((uint32_t *)buffer, (uint64_t) (sector * 512), 512, count);
+ while((BSP_SD_Get_TX_Busy()==1)&&(retval==MSD_OK)){;}
+ BSP_SD_Clear_Busy();
+ return (retval? RES_ERROR : RES_OK);
+ } else {
+ CPU_CACHE_Flush((uint32_t *)buffer,(512));
+ BSP_SD_Set_TX_Busy();
+ retval= BSP_SD_WriteBlocks_DMA((uint32_t *)buffer, (uint64_t) (sector * 512), 512, 1);
+ while((BSP_SD_Get_TX_Busy()==1)&&(retval==MSD_OK)){;}
+ BSP_SD_Clear_Busy();
+ return (retval? RES_ERROR : RES_OK);
+
+ }
+}
+
+int SDFileSystem::disk_sync()
+{
+ //Select the card so we're forced to wait for the end of any internal write processes
+ __DSB();
+ __ISB();
+ while(BSP_SD_Get_Busy()==1){;}
+ BSP_SD_Set_Busy();
+ while(BSP_SD_GetStatus()==SD_TRANSFER_BUSY){;}
+ if(BSP_SD_GetStatus()==SD_TRANSFER_OK)
+ {
+ BSP_SD_Clear_Busy();
+ return RES_OK;
+ } else {
+ BSP_SD_Clear_Busy();
+ return RES_ERROR;
+ }
+}
+
+uint32_t SDFileSystem::disk_sectors()
+{
+ uint32_t sectors=0;
+ //Make sure the card is initialized before proceeding
+ if (m_Status & STA_NOINIT)
+ return 0;
+ __DSB();
+ __ISB();
+ while(BSP_SD_Get_Busy()==1){;}
+ BSP_SD_Set_Busy();
+ BSP_SD_GetCardInfo(&m_CardInfo);
+ sectors=m_CardInfo.CardCapacity>>9;
+ BSP_SD_Clear_Busy();
+ return sectors;
+}
+
+void SDFileSystem::onCardRemoval()
+{
+ //Check the card socket
+ checkSocket();
+}
+
+inline void SDFileSystem::checkSocket()
+{
+ //Use the card detect switch (if available) to determine if the socket is occupied
+ if (m_CdAssert != -1) {
+ if (m_Status & STA_NODISK) {
+ if (m_Cd == m_CdAssert) {
+ //The socket is now occupied
+ m_Status &= ~STA_NODISK;
+ m_CardType = CARD_UNKNOWN;
+ }
+ } else {
+ if (m_Cd != m_CdAssert) {
+ //The socket is now empty
+ m_Status |= (STA_NODISK | STA_NOINIT);
+ m_CardType = CARD_NONE;
+ }
+ }
+ }
+}
+
+
+/*interrupthandlers */
+/**
+ * @brief This function handles DMA2 Stream 3 interrupt request.
+ * @param None
+ * @retval None
+ */
+void SDFileSystem::DMA2_Stream3_IRQHandler(void)
+{
+ BSP_SD_DMA_Rx_IRQHandler();
+ BSP_SD_Clear_RX_Busy();
+}
+
+/**
+ * @brief This function handles DMA2 Stream 6 interrupt request.
+ * @param None
+ * @retval None
+ */
+void SDFileSystem::DMA2_Stream6_IRQHandler(void)
+{
+ BSP_SD_DMA_Tx_IRQHandler();
+ BSP_SD_Clear_TX_Busy();
+}
+
+/**
+ * @brief This function handles SDIO interrupt request.
+ * @param None
+ * @retval None
+ */
+void SDFileSystem::SDMMC1_IRQHandler(void)
+{
+ BSP_SD_IRQHandler();
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SDFileSystem/SDFileSystem.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,194 @@
+/* SD/MMC File System Library
+ * Copyright (c) 2016 Neil Thiessen
+ * Modified for the use with STM32F746 Discovery (C) 2016 Dieter Greaf
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SD_FILE_SYSTEM_H
+#define SD_FILE_SYSTEM_H
+
+#include "mbed.h"
+#include "stm32746g_discovery_sd.h"
+#include "FATFileSystem.h"
+
+/** SDFileSystem class.
+ * Used for creating a virtual file system for accessing SD/MMC cards via SPI.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ * #include "SDFileSystem.h"
+ *
+ * //Create an SDFileSystem object
+ * SDFileSystem sd("sd");
+ *
+ * int main()
+ * {
+ * //Mount the filesystem
+ * sd.mount();
+ *
+ * //Perform a write test
+ * printf("\nWriting to SD card...");
+ * FILE *fp = fopen("/sd/sdtest.txt", "w");
+ * if (fp != NULL) {
+ * fprintf(fp, "We're writing to an SD card!");
+ * fclose(fp);
+ * printf("success!\n");
+ * } else {
+ * printf("failed!\n");
+ * }
+ *
+ * //Perform a read test
+ * printf("Reading from SD card...");
+ * fp = fopen("/sd/sdtest.txt", "r");
+ * if (fp != NULL) {
+ * char c = fgetc(fp);
+ * if (c == 'W')
+ * printf("success!\n");
+ * else
+ * printf("incorrect char (%c)!\n", c);
+ * fclose(fp);
+ * } else {
+ * printf("failed!\n");
+ * }
+ *
+ * //Unmount the filesystem
+ * sd.unmount();
+ * }
+ * @endcode
+
+ */
+ #define CMD59 (0x40 | 59)
+using namespace mbed;
+
+class SDFileSystem : public FATFileSystem
+{
+public:
+ /** Represents the different card detect switch types
+ */
+ enum SwitchType {
+ SWITCH_NONE, /**< No card detect switch (assumes socket is always occupied) */
+ SWITCH_POS_NO, /**< Switch shorts to VDD when the socket is occupied (positive logic, normally open) */
+ SWITCH_POS_NC, /**< Switch shorts to VDD when the socket is empty (positive logic, normally closed) */
+ SWITCH_NEG_NO, /**< Switch shorts to GND when the socket is occupied (negative logic, normally open) */
+ SWITCH_NEG_NC /**< Switch shorts to GND when the socket is empty (negative logic, normally closed) */
+ };
+
+ /** Represents the different SD/MMC card types
+ */
+ enum CardType {
+ CARD_NONE, /**< No card is present */
+ CARD_MMC, /**< MMC card */
+ CARD_SD, /**< Standard capacity SD card */
+ CARD_SDHC, /**< High capacity SD card */
+ CARD_UNKNOWN /**< Unknown or unsupported card */
+ };
+
+ /** Create a virtual file system for accessing SD/MMC cards via SPI
+ *
+ * @param mosi The SPI data out pin.
+ * @param miso The SPI data in pin.
+ * @param sclk The SPI clock pin.
+ * @param cs The SPI chip select pin.
+ * @param name The name used to access the virtual filesystem.
+ * @param cd The card detect pin.
+ * @param cdtype The type of card detect switch.
+ * @param hz The SPI bus frequency (defaults to 1MHz).
+ */
+ SDFileSystem( const char* name);
+
+ /** Determine whether or not a card is present
+ *
+ * @returns
+ * 'true' if a card is present,
+ * 'false' if no card is present.
+ */
+ bool card_present();
+
+ /** Get the detected SD/MMC card type
+ *
+ * @returns The detected card type as a CardType enum.
+ *
+ * @note Valid after the filesystem has been mounted.
+ */
+ SDFileSystem::CardType card_type();
+
+ /** Get whether or not CRC is enabled for commands and data
+ *
+ * @returns
+ * 'true' if CRC is enabled for commands and data,
+ * 'false' if CRC is disabled for commands and data.
+ */
+ bool crc();
+
+ /** Set whether or not CRC is enabled for commands and data
+ *
+ * @param enabled Whether or not to enable CRC for commands and data.
+ */
+ void crc(bool enabled);
+
+ /** Get whether or not 16-bit frames are enabled for data read/write operations
+ *
+ * @returns
+ * 'true' if 16-bit frames will be used during data read/write operations,
+ * 'false' if 8-bit frames will be used during data read/write operations.
+ */
+ bool large_frames();
+
+ /** Set whether or not 16-bit frames are enabled for data read/write operations
+ *
+ * @param enabled Whether or not 16-bit frames are enabled for data read/write operations.
+ */
+ void large_frames(bool enabled);
+
+ /** Get whether or not write validation is enabled for data write operations
+ *
+ * @returns
+ * 'true' if data writes will be verified using CMD13,
+ * 'false' if data writes will not be verified.
+ */
+ bool write_validation();
+
+ /** Set whether or not write validation is enabled for data write operations
+ *
+ * @param enabled Whether or not write validation is enabled for data write operations.
+ */
+ void write_validation(bool enabled);
+
+ virtual int unmount();
+ virtual int disk_initialize();
+ virtual int disk_status();
+ virtual int disk_read(uint8_t* buffer, uint32_t sector, uint32_t count);
+ virtual int disk_write(const uint8_t* buffer, uint32_t sector, uint32_t count);
+ virtual int disk_sync();
+ virtual uint32_t disk_sectors();
+
+private:
+ Timer m_Timer;
+ InterruptIn m_Cd;
+ int m_CdAssert;
+ SDFileSystem::CardType m_CardType;
+ bool m_Crc;
+ bool m_LargeFrames;
+ bool m_WriteValidation;
+ int m_Status;
+ HAL_SD_CardInfoTypedef m_CardInfo;
+ //Internal methods
+ void onCardRemoval();
+ void checkSocket();
+ void DMA2_Stream3_IRQHandler();
+ void DMA2_Stream6_IRQHandler();
+ void SDMMC1_IRQHandler();
+};
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SDFileSystem/SD_Helper.c Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,138 @@
+#include "SD_Helper.h"
+#include "stm32746g_discovery_sd.h"
+
+#define _CCSIDR_LSSHIFT(x) (((x) & SCB_CCSIDR_LINESIZE_Msk) >> SCB_CCSIDR_LINESIZE_Pos)
+
+static SD_HandleTypeDef uSdHandle;
+static int RX_Busy;
+static int TX_Busy;
+static int SD_Busy;
+
+
+
+/* cache flush */
+void CPU_CACHE_Flush(uint32_t * buffer, uint32_t length)
+{
+ // SCB_InvalidateDCache_by_Addr(buffer,length);
+ uint32_t ccsidr;
+ uint32_t smask;
+ uint32_t sshift;
+ uint32_t ways;
+ uint32_t wshift;
+ uint32_t ssize;
+ uint32_t sets;
+ uint32_t sw;
+ uint32_t start;
+ uint32_t ende;
+
+ start=(uint32_t)buffer;
+ ende=start+length;
+ /* Get the characteristics of the D-Cache */
+
+ ccsidr = SCB->CCSIDR;
+ smask = CCSIDR_SETS(ccsidr); /* (Number of sets) - 1 */
+ sshift = _CCSIDR_LSSHIFT(ccsidr) + 4; /* log2(cache-line-size-in-bytes) */
+ ways = CCSIDR_WAYS(ccsidr); /* (Number of ways) - 1 */
+
+ /* Calculate the bit offset for the way field in the DCCISW register by
+ * counting the number of leading zeroes. For example:
+ *
+ * Number of Value of ways Field
+ * Ways 'ways' Offset
+ * 2 1 31
+ * 4 3 30
+ * 8 7 29
+ * ...
+ */
+
+ wshift = __CLZ(ways) & 0x1f;
+
+ /* Clean and invalidate the D-Cache over the range of addresses */
+
+ ssize = (1 << sshift);
+ start &= ~(ssize - 1);
+ __DSB();
+
+ do
+ {
+ int32_t tmpways = ways;
+
+ /* Isolate the cache line associated with this address. For example
+ * if the cache line size is 32 bytes and the cache size is 16KB, then
+ *
+ * sshift = 5 : Offset to the beginning of the set field
+ * smask = 0x007f : Mask of the set field
+ */
+
+ sets = ((uint32_t)start >> sshift) & smask;
+
+ /* Clean and invalidate each way for this cacheline */
+
+ do
+ {
+ sw = ((tmpways << wshift) | (sets << sshift));
+ SCB->DCCISW=sw;
+
+ }
+ while (tmpways--);
+
+ /* Increment the address by the size of one cache line. */
+
+ start += ssize;
+ }
+ while (start < ende);
+
+ __DSB();
+ __ISB();
+}
+
+void BSP_SD_CommandTransaction(char cmd, unsigned int arg)
+{
+ SDMMC_CmdInitTypeDef sdmmc_cmdinitstructure;
+ uSdHandle.Instance = SDMMC1;
+ sdmmc_cmdinitstructure.Argument = (uint32_t)arg;
+ sdmmc_cmdinitstructure.CmdIndex = cmd;
+ sdmmc_cmdinitstructure.Response = SDMMC_RESPONSE_SHORT;
+ sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+ sdmmc_cmdinitstructure.CPSM = SDMMC_CPSM_ENABLE;
+ SDMMC_SendCommand(uSdHandle.Instance, &sdmmc_cmdinitstructure);
+}
+
+void BSP_SD_Set_Busy(void)
+{
+ SD_Busy=1;
+}
+void BSP_SD_Clear_Busy(void)
+{
+ SD_Busy=0;
+}
+int BSP_SD_Get_Busy(void)
+{
+ return SD_Busy;
+}
+
+void BSP_SD_Set_RX_Busy(void)
+{
+ RX_Busy=1;
+}
+void BSP_SD_Clear_RX_Busy(void)
+{
+ RX_Busy=0;
+}
+int BSP_SD_Get_RX_Busy(void)
+{
+ return RX_Busy;
+}
+
+void BSP_SD_Set_TX_Busy(void)
+{
+ TX_Busy=1;
+}
+void BSP_SD_Clear_TX_Busy(void)
+{
+ TX_Busy=0;
+}
+int BSP_SD_Get_TX_Busy(void)
+{
+ return TX_Busy;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SDFileSystem/SD_Helper.h Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,29 @@
+ /* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef ___SD_Helper
+#define ___SD_Helper
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+void CPU_CACHE_Flush(uint32_t * buffer, uint32_t length);
+
+void BSP_SD_CommandTransaction(char cmd, unsigned int arg);
+
+void BSP_SD_Set_Busy(void);
+void BSP_SD_Clear_Busy(void);
+int BSP_SD_Get_Busy(void);
+void BSP_SD_Set_RX_Busy(void);
+void BSP_SD_Clear_RX_Busy(void);
+int BSP_SD_Get_RX_Busy(void);
+void BSP_SD_Set_TX_Busy(void);
+void BSP_SD_Clear_TX_Busy(void);
+int BSP_SD_Get_TX_Busy(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___SD_Helper */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TS_DISCO_F746NG.lib Thu Apr 19 19:59:54 2018 +0000 @@ -0,0 +1,1 @@ +https://developer.mbed.org/teams/ST/code/TS_DISCO_F746NG/#fe0cf5e2960f
--- a/main.cpp Wed Apr 13 09:54:35 2016 +0000
+++ b/main.cpp Thu Apr 19 19:59:54 2018 +0000
@@ -1,53 +1,70 @@
#include "mbed.h"
#include "SDFileSystem.h"
+#include "LCD_DISCO_F746NG.h"
+#include "TS_DISCO_F746NG.h"
#include <stdio.h>
+#include <stdlib.h>
+#include <string>
+void drawImage(char * name, uint16_t x, uint16_t y);
+
+LCD_DISCO_F746NG lcd;
DigitalOut myled(LED1);
SDFileSystem sd("sd");
+TS_DISCO_F746NG ts;
-// trim '\n'
-void ntrim(char *str)
-{
- int i;
- for (i = 0; str[i] != 0; ++i);
+int main() {
+ uint8_t TS_Status;
+
+ lcd.SetBackColor(LCD_COLOR_BLACK);
+
+ // In this example, the TS is initialized but not used.
- if (i > 0 && str[i - 1] == '\n')
- str[i - 1] = 0;
+ TS_Status = ts.Init(lcd.GetXSize(), lcd.GetYSize());
+ if (TS_Status != TS_OK) {
+ lcd.Clear(LCD_COLOR_RED);
+ lcd.SetBackColor(LCD_COLOR_RED);
+ lcd.SetTextColor(LCD_COLOR_WHITE);
+ lcd.DisplayStringAt(0, LINE(5), (uint8_t *)"TOUCHSCREEN INIT FAIL", CENTER_MODE);
+ } else {
+ lcd.Clear(LCD_COLOR_BLACK);
+ lcd.SetBackColor(LCD_COLOR_BLACK);
+ lcd.SetTextColor(LCD_COLOR_WHITE);
+ lcd.DisplayStringAt(0, LINE(5), (uint8_t *)"TOUCHSCREEN INIT OK", CENTER_MODE);
+ }
+
+ wait(1);
+
+ //Mounting SD-based filesystem
+ sd.mount();
+
+ //Drawing BMP file from SD-card
+ drawImage("/sd/interface.bmp", 0, 0);
}
-int main() {
- printf("Starting Filetest");
- sd.mount();
- FILE * fp;
- fp = fopen("/sd/test.txt", "w");
- if (fp == NULL)
- {
- printf("open error!!\r\n");
- while(1);
- }
- fprintf(fp,"Writing to SD Card");
- fclose (fp);
- fp = fopen("/sd/test.txt", "r");
- if (fp == NULL)
- {
- printf("open error!!\r\n");
- while(1);
- }
- // read text file
- char buf[1024];
- while (fgets(buf, sizeof(buf), fp) != NULL)
- {
- ntrim(buf);
- printf("%s\r\n", buf);
- }
+void drawImage(char * name, uint16_t x, uint16_t y){
+ int fileSize;
+ char * buffer;
+ FILE *Image = fopen(name, "rb"); // open the bmp file
+
+ //obtain file size:
+ fseek (Image , 0 , SEEK_END);
+ fileSize = ftell (Image);
+ rewind (Image);
+
+ // allocate memory to contain the whole file:
+ buffer = (char*) malloc (sizeof(char)*fileSize);
+
+ // copy the file into the buffer:
+ fseek (Image, 0 , SEEK_SET );
+ // set SD file data start position
+ fread (buffer,1,fileSize,Image);
+ fclose (Image);
- // file close
- fclose(fp);
- while(1) {
- myled = 1; // LED is ON
- wait(0.2); // 200 ms
- myled = 0; // LED is OFF
- wait(1.0); // 1 sec
- }
-}
+ //Draw image
+ lcd.DrawBitmap(x,y,(uint8_t *)buffer);
+
+ //Free allocated memory
+ free (buffer);
+}
\ No newline at end of file