Diff: BSP_DISCO_F746NG/n25q128a.h

Revision:

4:95e30a911d97

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/BSP_DISCO_F746NG/n25q128a.h	Thu Apr 19 19:59:54 2018 +0000
@@ -0,0 +1,219 @@
+/**
+  ******************************************************************************
+  * @file    n25q128a.h
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    29-May-2015
+  * @brief   This file contains all the description of the N25Q128A QSPI memory.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __N25Q128A_H
+#define __N25Q128A_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Includes ------------------------------------------------------------------*/
+
+/** @addtogroup BSP
+  * @{
+  */ 
+
+/** @addtogroup Components
+  * @{
+  */ 
+  
+/** @addtogroup n25q128a
+  * @{
+  */
+
+/** @defgroup N25Q128A_Exported_Types
+  * @{
+  */
+   
+/**
+  * @}
+  */ 
+
+/** @defgroup N25Q128A_Exported_Constants
+  * @{
+  */
+   
+/** 
+  * @brief  N25Q128A Configuration  
+  */  
+#define N25Q128A_FLASH_SIZE                  0x1000000 /* 128 MBits => 16MBytes */
+#define N25Q128A_SECTOR_SIZE                 0x10000   /* 256 sectors of 64KBytes */
+#define N25Q128A_SUBSECTOR_SIZE              0x1000    /* 4096 subsectors of 4kBytes */
+#define N25Q128A_PAGE_SIZE                   0x100     /* 65536 pages of 256 bytes */
+
+#define N25Q128A_DUMMY_CYCLES_READ           8
+#define N25Q128A_DUMMY_CYCLES_READ_QUAD      10
+
+#define N25Q128A_BULK_ERASE_MAX_TIME         250000
+#define N25Q128A_SECTOR_ERASE_MAX_TIME       3000
+#define N25Q128A_SUBSECTOR_ERASE_MAX_TIME    800
+
+/** 
+  * @brief  N25Q128A Commands  
+  */  
+/* Reset Operations */
+#define RESET_ENABLE_CMD                     0x66
+#define RESET_MEMORY_CMD                     0x99
+
+/* Identification Operations */
+#define READ_ID_CMD                          0x9E
+#define READ_ID_CMD2                         0x9F
+#define MULTIPLE_IO_READ_ID_CMD              0xAF
+#define READ_SERIAL_FLASH_DISCO_PARAM_CMD    0x5A
+
+/* Read Operations */
+#define READ_CMD                             0x03
+#define FAST_READ_CMD                        0x0B
+#define DUAL_OUT_FAST_READ_CMD               0x3B
+#define DUAL_INOUT_FAST_READ_CMD             0xBB
+#define QUAD_OUT_FAST_READ_CMD               0x6B
+#define QUAD_INOUT_FAST_READ_CMD             0xEB
+
+/* Write Operations */
+#define WRITE_ENABLE_CMD                     0x06
+#define WRITE_DISABLE_CMD                    0x04
+
+/* Register Operations */
+#define READ_STATUS_REG_CMD                  0x05
+#define WRITE_STATUS_REG_CMD                 0x01
+
+#define READ_LOCK_REG_CMD                    0xE8
+#define WRITE_LOCK_REG_CMD                   0xE5
+
+#define READ_FLAG_STATUS_REG_CMD             0x70
+#define CLEAR_FLAG_STATUS_REG_CMD            0x50
+
+#define READ_NONVOL_CFG_REG_CMD              0xB5
+#define WRITE_NONVOL_CFG_REG_CMD             0xB1
+
+#define READ_VOL_CFG_REG_CMD                 0x85
+#define WRITE_VOL_CFG_REG_CMD                0x81
+
+#define READ_ENHANCED_VOL_CFG_REG_CMD        0x65
+#define WRITE_ENHANCED_VOL_CFG_REG_CMD       0x61
+
+/* Program Operations */
+#define PAGE_PROG_CMD                        0x02
+#define DUAL_IN_FAST_PROG_CMD                0xA2
+#define EXT_DUAL_IN_FAST_PROG_CMD            0xD2
+#define QUAD_IN_FAST_PROG_CMD                0x32
+#define EXT_QUAD_IN_FAST_PROG_CMD            0x12
+
+/* Erase Operations */
+#define SUBSECTOR_ERASE_CMD                  0x20
+#define SECTOR_ERASE_CMD                     0xD8
+#define BULK_ERASE_CMD                       0xC7
+
+#define PROG_ERASE_RESUME_CMD                0x7A
+#define PROG_ERASE_SUSPEND_CMD               0x75
+
+/* One-Time Programmable Operations */
+#define READ_OTP_ARRAY_CMD                   0x4B
+#define PROG_OTP_ARRAY_CMD                   0x42
+
+/** 
+  * @brief  N25Q128A Registers  
+  */ 
+/* Status Register */
+#define N25Q128A_SR_WIP                      ((uint8_t)0x01)    /*!< Write in progress */
+#define N25Q128A_SR_WREN                     ((uint8_t)0x02)    /*!< Write enable latch */
+#define N25Q128A_SR_BLOCKPR                  ((uint8_t)0x5C)    /*!< Block protected against program and erase operations */
+#define N25Q128A_SR_PRBOTTOM                 ((uint8_t)0x20)    /*!< Protected memory area defined by BLOCKPR starts from top or bottom */
+#define N25Q128A_SR_SRWREN                   ((uint8_t)0x80)    /*!< Status register write enable/disable */
+
+/* Nonvolatile Configuration Register */
+#define N25Q128A_NVCR_LOCK                   ((uint16_t)0x0001) /*!< Lock nonvolatile configuration register */
+#define N25Q128A_NVCR_DUAL                   ((uint16_t)0x0004) /*!< Dual I/O protocol */
+#define N25Q128A_NVCR_QUAB                   ((uint16_t)0x0008) /*!< Quad I/O protocol */
+#define N25Q128A_NVCR_RH                     ((uint16_t)0x0010) /*!< Reset/hold */
+#define N25Q128A_NVCR_ODS                    ((uint16_t)0x01C0) /*!< Output driver strength */
+#define N25Q128A_NVCR_XIP                    ((uint16_t)0x0E00) /*!< XIP mode at power-on reset */
+#define N25Q128A_NVCR_NB_DUMMY               ((uint16_t)0xF000) /*!< Number of dummy clock cycles */
+
+/* Volatile Configuration Register */
+#define N25Q128A_VCR_WRAP                    ((uint8_t)0x03)    /*!< Wrap */
+#define N25Q128A_VCR_XIP                     ((uint8_t)0x08)    /*!< XIP */
+#define N25Q128A_VCR_NB_DUMMY                ((uint8_t)0xF0)    /*!< Number of dummy clock cycles */
+
+/* Enhanced Volatile Configuration Register */
+#define N25Q128A_EVCR_ODS                    ((uint8_t)0x07)    /*!< Output driver strength */
+#define N25Q128A_EVCR_VPPA                   ((uint8_t)0x08)    /*!< Vpp accelerator */
+#define N25Q128A_EVCR_RH                     ((uint8_t)0x10)    /*!< Reset/hold */
+#define N25Q128A_EVCR_DUAL                   ((uint8_t)0x40)    /*!< Dual I/O protocol */
+#define N25Q128A_EVCR_QUAD                   ((uint8_t)0x80)    /*!< Quad I/O protocol */
+
+/* Flag Status Register */
+#define N25Q128A_FSR_PRERR                   ((uint8_t)0x02)    /*!< Protection error */
+#define N25Q128A_FSR_PGSUS                   ((uint8_t)0x04)    /*!< Program operation suspended */
+#define N25Q128A_FSR_VPPERR                  ((uint8_t)0x08)    /*!< Invalid voltage during program or erase */
+#define N25Q128A_FSR_PGERR                   ((uint8_t)0x10)    /*!< Program error */
+#define N25Q128A_FSR_ERERR                   ((uint8_t)0x20)    /*!< Erase error */
+#define N25Q128A_FSR_ERSUS                   ((uint8_t)0x40)    /*!< Erase operation suspended */
+#define N25Q128A_FSR_READY                   ((uint8_t)0x80)    /*!< Ready or command in progress */
+
+/**
+  * @}
+  */
+  
+/** @defgroup N25Q128A_Exported_Functions
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+      
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __N25Q128A_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/