![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
forkd
Fork of LG2 by
Diff: commandset.c
- Revision:
- 1:f2adcae3d304
- Parent:
- 0:8ad47e2b6f00
- Child:
- 21:bc8c1cec3da6
diff -r 8ad47e2b6f00 -r f2adcae3d304 commandset.c --- a/commandset.c Sat Jan 30 13:00:39 2016 +0000 +++ b/commandset.c Sat Jan 30 13:53:19 2016 +0000 @@ -1,74 +1,74 @@ + + + #include <string.h> -#include "commandset.h" -#include "el_lin.h" -#include "CyclesSync.h" -#include "CntrlGLD.h" -#include "InputOutput.h" -#include "Parameters.h" + + +#include "Global.h" #define COMMAND_DEBUG //++++++++++++++++debug++++++++++++++++ extern uint32_t In_Flag; unsigned char BuffTemp1[100]; -//e. +++++++++++++++++++ variables +++++++++++++++++++++++++++++++++++++++++++ //r. +++++++++++++++++++ ïåðåìåííûå +++++++++++++++++++++++++++++++++++++++++++ -uint32_t CMD_Mode = 0; //e. operation mode of the device //r. ðåæèì ðàáîòû óñòðîéñòâà -uint32_t CMD_Code; //e. full code of the last recieved command //r. ïîëíûé êîä ïîñëåäíåé ïðèíÿòîé êîìàíäû -uint32_t wrk_period; //e. run period in cycles //r. ðàáî÷èé ïåðèîä â öèêëàõ +//e. +++++++++++++++++++ variables +++++++++++++++++++++++++++++++++++++++++++ //r. +++++++++++++++++++ ���������� +++++++++++++++++++++++++++++++++++++++++++ +uint32_t CMD_Mode = 0; //e. operation mode of the device //r. ����� ������ ���������� +uint32_t CMD_Code; //e. full code of the last recieved command //r. ������ ��� ��������� �������� ������� +uint32_t wrk_period; //e. run period in cycles //r. ������� ������ � ������ uint32_t blt_in_test; - int32_t ScopeMode; //e. mode of display for a control point of an scope //r. ðåæèì îòîáðàæåíèÿ äëÿ êîíòðîëüíîé òî÷êè îñöèëëîãðàôà + int32_t ScopeMode; //e. mode of display for a control point of an scope //r. ����� ����������� ��� ����������� ����� ������������ -void SetSpeedPeriod(void) //e.============ procedure of set of rate and periodicity of answer ======== //r.============ ïðîöåäóðà óñòàíîâêè ñêîðîñòè è ïåðèîäè÷íîñòè îòâåòà ======== +void SetSpeedPeriod(void) //e.============ procedure of set of rate and periodicity of answer ======== //r.============ ��������� ��������� �������� � ������������� ������ ======== { - if ((rcv_buf[3] & 0x0080) != 0) //e. is periodic data transmission needed? //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à òðóáóåòñÿ? + if ((rcv_buf[3] & 0x0080) != 0) //e. is periodic data transmission needed? //r. ������������� �������� ���������? { - trm_cycl = 1; //e. yes, set present flag //r. äà, óñòàíîâèòü äàííûé ôëàã + trm_cycl = 1; //e. yes, set present flag //r. ��, ���������� ������ ���� } else { - trm_cycl = 0; //e. no, reset present flag //r. íåò, ñáðîñèòü äàííûé ôëàã + trm_cycl = 0; //e. no, reset present flag //r. ���, �������� ������ ���� } - SRgR &= 0xffcf; //e. clear the bit of transfer rate //r. î÷èñòêà áèò ñêîðîñòè ïåðåäà÷è + SRgR &= 0xffcf; //e. clear the bit of transfer rate //r. ������� ��� �������� �������� trm_rate = (rcv_buf[3] >> 1) & 0x0030; - SRgR |= trm_rate; //e. set present transfer rate //r. óñòàíîâèòü äàííóþ ñêîðîñòü ïåðåäà÷è + SRgR |= trm_rate; //e. set present transfer rate //r. ���������� ������ �������� �������� } // SetSpeedPeriod -void B_Delta_BINS(void) //r.===ïðîöåäóðà âûäà÷è íàêîïëåííûõ ðàçíîñòåé ñ÷åò÷èêîâ èìïóëüñîâ â ÈÍÑ â ôîðìàòå 14.18 +void B_Delta_BINS(void) //r.===��������� ������ ����������� ��������� ��������� ��������� � ��� � ������� 14.18 { Valid_Data = 0; // reset all bits of status word - num_of_par = 2; //e. 2 parameters output //r. âûâîäèòü 2 ïàðàìåòðà - addr_param[0] = &Output.Str.BINS_dif; //e. set the first parameter address //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà - addr_param[1] = &Valid_Data; //e. set the second paremeter address //r. çàäàòü àäðåñ âòîðîãî ïàðàìåòðà - size_param[0] = 4; //e. the length of the 1st parameter is 4 bytes //r. ïàðàìåòð 1 èìåeò äëèíó 4 áàéòà - size_param[1] = 1; //e. the length of the 2nd parameter is 1 byte (!! - the high byte, instead of low is transmitted) //r. ïàðàìåòð 2 èìååò äëèíó 1 áàéò (!!! ïåðåäàåòñÿ ñòàðøèé áàéò, à íå ìëàäøèé) - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + num_of_par = 2; //e. 2 parameters output //r. �������� 2 ��������� + addr_param[0] = &Output.Str.BINS_dif; //e. set the first parameter address //r. ������ ����� ������� ��������� + addr_param[1] = &Valid_Data; //e. set the second paremeter address //r. ������ ����� ������� ��������� + size_param[0] = 4; //e. the length of the 1st parameter is 4 bytes //r. �������� 1 ���e� ����� 4 ����� + size_param[1] = 1; //e. the length of the 2nd parameter is 1 byte (!! - the high byte, instead of low is transmitted) //r. �������� 2 ����� ����� 1 ���� (!!! ���������� ������� ����, � �� �������) + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� } // B_Delta_BINS -void B_Delta_SF(void) //r.=== ïðîöåäóðà äëÿ èçìåðåíèÿ ìàñøòàáíîãî ìíîæèòåëÿ +void B_Delta_SF(void) //r.=== ��������� ��� ��������� ����������� ��������� { - //e. time for data transfer has come, we work only with dither counters //r. ïðèøëî âðåìÿ ïåðåäàâàòü äàííûå, ðàáîòàåì òîëüêî ñ âèáðî-ñ÷åò÷èêàìè - RgConB = RATE_VIBRO_1; //e. set in the additional register of device control the mode of work with dither counters and the filter of moving average //r. óñòàíàâëèâàåì â äîïîëíèòåëüíîì ðåãèñòðå óïðàâëåíèÿ ðåæèì ðàáîòû ñ âèáðîñ÷åò÷èêàìè è ôèëüòðîì ñêîëüçÿùåãî ñðåäíåãî + //e. time for data transfer has come, we work only with dither counters //r. ������ ����� ���������� ������, �������� ������ � �����-���������� + RgConB = RATE_VIBRO_1; //e. set in the additional register of device control the mode of work with dither counters and the filter of moving average //r. ������������� � �������������� �������� ���������� ����� ������ � ��������������� � �������� ����������� �������� Valid_Data = 0; // reset all bits of status word - num_of_par = 5;//8; //e. 8 parameters output //r. âûâîäèòü 8 ïàðàìåòðà - addr_param[0] = &Output.Str.SF_dif; //e. set the first parameter address //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà - addr_param[1] = &Out_main_cycle_latch; //e. set the second paremeter address //r. çàäàòü àäðåñ âòîðîãî ïàðàìåòðà + num_of_par = 5;//8; //e. 8 parameters output //r. �������� 8 ��������� + addr_param[0] = &Output.Str.SF_dif; //e. set the first parameter address //r. ������ ����� ������� ��������� + addr_param[1] = &Out_main_cycle_latch; //e. set the second paremeter address //r. ������ ����� ������� ��������� addr_param[2] = &Out_T_latch;//F_ras; addr_param[3] = &Output.Str.WP_reg; addr_param[4] = &Output.Str.Tmp_Out; - size_param[0] = 8; //e. the length of the 1st parameter is 4 bytes //r. ïàðàìåòð 1 èìåeò äëèíó 4 áàéòà - size_param[1] = 4; //e. the length of the 2nd parameter is 1 byte (!! - the high byte, instead of low is transmitted) //r. ïàðàìåòð 2 èìååò äëèíó 1 áàéò (!!! ïåðåäàåòñÿ ñòàðøèé áàéò, à íå ìëàäøèé) + size_param[0] = 8; //e. the length of the 1st parameter is 4 bytes //r. �������� 1 ���e� ����� 4 ����� + size_param[1] = 4; //e. the length of the 2nd parameter is 1 byte (!! - the high byte, instead of low is transmitted) //r. �������� 2 ����� ����� 1 ���� (!!! ���������� ������� ����, � �� �������) size_param[2] = 2; size_param[3] = 2; size_param[4] = 12; - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� } // B_Delta_SF void B_Delta_PS_execution(void) @@ -94,12 +94,12 @@ Valid_Data = 0; // reset all bits of status word - num_of_par = 2; //e. 2 parameters output //r. âûâîäèòü 2 ïàðàìåòðà - addr_param[0] = &Output.Str.PS_dif; //e. set the first parameter address //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà + num_of_par = 2; //e. 2 parameters output //r. �������� 2 ��������� + addr_param[0] = &Output.Str.PS_dif; //e. set the first parameter address //r. ������ ����� ������� ��������� addr_param[1] = ¶mTmpWord; - size_param[0] = 2; //e. the 1st parameter has 2 bytes length //r. ïàðàìåòð 1 èìåeò äëèíó 2 áàéò - size_param[1] = 2; //e. the 2nd and 3rd parameters have 1 bytes length//r. ïàðàìåòðû 2,3 èìåþò äëèíó 1 áàéò - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + size_param[0] = 2; //e. the 1st parameter has 2 bytes length //r. �������� 1 ���e� ����� 2 ���� + size_param[1] = 2; //e. the 2nd and 3rd parameters have 1 bytes length//r. ��������� 2,3 ����� ����� 1 ���� + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� index++; if (index > 21) @@ -108,45 +108,45 @@ } } // B_Delta_PS_execution -void M_Mirror(void) //e.---------------- prepare to transmission of the copy of receiving buffer ------------- //r.---------------- ïîäãîòîâêà ïåðåäà÷è êîïèè ïðèåìíîãî áóôåðà ------------- +void M_Mirror(void) //e.---------------- prepare to transmission of the copy of receiving buffer ------------- //r.---------------- ���������� �������� ����� ��������� ������ ------------- { - num_of_par = 1; //e. 1 parameter output //r. âûâîäèòü 1 ïàðàìåòð + num_of_par = 1; //e. 1 parameter output //r. �������� 1 �������� - addr_param[0] = &rcv_copy; //e. set the address of the receiving buffer //r. óñòàíîâêà àäðåñà ïðèåìíîãî áóôåðà + addr_param[0] = &rcv_copy; //e. set the address of the receiving buffer //r. ��������� ������ ��������� ������ - //e. multiply the number of copied words on 2, since each //r. óìíîæèòü ÷èñëî ñêîïèðîâàííûõ ñëîâ íà 2, ò.ê. êàæäîå - //e. will be trasferred in two steps: first zero, and then //r. áóäåò ïåðåäàâàòüñ÷ â äâà ïðèåìà: ñíà÷àëà íóëåâîé, à çàòåì + //e. multiply the number of copied words on 2, since each //r. �������� ����� ������������� ���� �� 2, �.�. ������ + //e. will be trasferred in two steps: first zero, and then //r. ����� ������������ � ��� ������: ������� �������, � ����� size_param[0] = rcv_byt_copy << 1; // multiplay by 2 if (size_param[0] >= 64) { - size_param[0] = 64; //e. maximal amount - no more than double length of the copy buffer //r. ìàêñèìàëüíîå êîëè÷åñòâî - íå áîëåå äâîéíîé äëèíû áóôåðà-êîïèè + size_param[0] = 64; //e. maximal amount - no more than double length of the copy buffer //r. ������������ ���������� - �� ����� ������� ����� ������-����� } - trm_rate = 0; //e. set the transfer rate to the 38400 bauds //r. óñòàíîâèòü ñêîðîñòü ïåðåäà÷è 38400 áîä - trm_cycl = 0; //e. forbid cyclic transmission of the parameter //r. çàïðåòèòü ïåðåäà÷ó ïàðàìåòðà â öèêëå - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + trm_rate = 0; //e. set the transfer rate to the 38400 bauds //r. ���������� �������� �������� 38400 ��� + trm_cycl = 0; //e. forbid cyclic transmission of the parameter //r. ��������� �������� ��������� � ����� + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� } // M_Mirror -void Mk_Ask1(void) //r.----------------- prepare of the standart answer 1 ---------------------- //r.----------------- ïîäãîòîâêà ñòàíäàðòíîãî îòâåòà 1 ---------------------- +void Mk_Ask1(void) //r.----------------- prepare of the standart answer 1 ---------------------- //r.----------------- ���������� ������������ ������ 1 ---------------------- { - CMD_Code &= 0xff00; //e. clear bits of errors //r. î÷èñòèòü â íåì ïîëå îøèáîê - num_of_par = 1; //e. total amount parameters in aswer - 1 //r. âñåãî ïàðàìåòðîâ â îòâåòå - 1 - addr_param[0] = &CMD_Code; //e. and this parameter - returnable command code //r. è ýòîò ïàðàìåòð - âîçâðàùàåìûé êîä êîìàíäû - size_param[0] = 2; //e. and both its bytes //r. ïðè÷åì îáà åãî áàéòà - trm_ena = 1; //e. allow operation of the transmitter of the device //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà óñòðîéñòâà + CMD_Code &= 0xff00; //e. clear bits of errors //r. �������� � ��� ���� ������ + num_of_par = 1; //e. total amount parameters in aswer - 1 //r. ����� ���������� � ������ - 1 + addr_param[0] = &CMD_Code; //e. and this parameter - returnable command code //r. � ���� �������� - ������������ ��� ������� + size_param[0] = 2; //e. and both its bytes //r. ������ ��� ��� ����� + trm_ena = 1; //e. allow operation of the transmitter of the device //r. ��������� ������ ����������� ���������� } // Mk_Ask1 -void Mk_AskDev(void) //r.----------------- answer on a command for device mode set ------------ //r.----------------- Îòâåò íà êîìàíäó óñòàíîâêè ðåæèìà ïðèáîðà ------------ +void Mk_AskDev(void) //r.----------------- answer on a command for device mode set ------------ //r.----------------- ����� �� ������� ��������� ������ ������� ------------ { - num_of_par = 2; //e. 2 parameters output //r. âûâîäèòü äâà ïàðàìåòðà - addr_param[0] = &Device_Mode; //e. address of the counter mode register (intenal latch, external latch, etc.) //r. àäðåñ ðåãèñòðà ðåæèìà ñ÷åò÷èêîâ (âíóòð., âíåøíÿÿ çàùåëêà è ò.ä.) - addr_param[1] = &SRgR; //e. address of the mode register of the processor card //r. àäðåñ ðåãèñòðà ðåæèìà ïëàòû ïðîöåññîðà - size_param[0] = 2; //e. size of the counter mode register - 2 bytes //r. ðàçìåð ðåãèñòðà ðåæèìà ñ÷åò÷èêîâ - 2 áàéòà - size_param[1] = 2; //e. size of the mode register of the processor card //r. ðàçìåð ðåãèñòðà ðåæèìà ïëàòû ïðîöåññîðà - trm_cycl = 0; //e. forbid cyclic transmission of the parameter //r. çàïðåòèòü ïåðåäà÷ó ïàðàìåòðà â öèêëå - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + num_of_par = 2; //e. 2 parameters output //r. �������� ��� ��������� + addr_param[0] = &Device_Mode; //e. address of the counter mode register (intenal latch, external latch, etc.) //r. ����� �������� ������ ��������� (�����., ������� ������� � �.�.) + addr_param[1] = &SRgR; //e. address of the mode register of the processor card //r. ����� �������� ������ ����� ���������� + size_param[0] = 2; //e. size of the counter mode register - 2 bytes //r. ������ �������� ������ ��������� - 2 ����� + size_param[1] = 2; //e. size of the mode register of the processor card //r. ������ �������� ������ ����� ���������� + trm_cycl = 0; //e. forbid cyclic transmission of the parameter //r. ��������� �������� ��������� � ����� + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� } // Mk_AskDev -void GLD_Output(void) //e. ----------- Output modes --------- //r. --------- Ðåæèìû âûâîäà --------- +void GLD_Output(void) //e. ----------- Output modes --------- //r. --------- ������ ������ --------- { if (Latch_Rdy) //latch appeared { @@ -160,8 +160,8 @@ break; case 5: - CMD_Code &= 0xff1f; //e. reset bits of current command code settings of periodicity and transfer rate //r. ñáðîñèòü â òåêóùåì êîäå êîìàíäû áèòû óñòàíîâêè ïåðèîäè÷íîñòè è ñêîðîñòè ïåðåäà÷è - if (CMD_Code == 0xdd02) //e. is it the Rate2 mode? //r. ýòî ðåæèì Rate2? + CMD_Code &= 0xff1f; //e. reset bits of current command code settings of periodicity and transfer rate //r. �������� � ������� ���� ������� ���� ��������� ������������� � �������� �������� + if (CMD_Code == 0xdd02) //e. is it the Rate2 mode? //r. ��� ����� Rate2? { if (data_Rdy & WHOLE_PERIOD) { @@ -178,15 +178,15 @@ ///// -------- commands ------------------------------------------------------------- -//e. set main device operation modes: //r. Óñòàíîâêà îñíîâíûõ ðåæèìîâ ðàáîòû ïðèáîðà: -//e. 1. acions with counters (internal latch, external latch with request over line, //r. 1. ðàáîòà ñî ñ÷åò÷èêàìè (âíóòðåííÿÿ çàùåëêà, âíåøíÿÿ çàùåëêè ñ çàïðîñîì ïî ëèíèè, -//e. external latch without request over line (instant answer after receiving of external latch pulse)) //r. âíåøíÿÿ çàùåëêà áåç çàïðîñà ïî ëèíèè (îòâåò ñðàçó ïîñëå ïðèõîäà èìïóëüñà âíåøí. çàùåëêè)) -//e. 2. line receiving/transmission rate //r. 2. ñêîðîñòü ïðèåìà/ïåðåäà÷è ïî ëèíèè +//e. set main device operation modes: //r. ��������� �������� ������� ������ �������: +//e. 1. acions with counters (internal latch, external latch with request over line, //r. 1. ������ �� ���������� (���������� �������, ������� ������� � �������� �� �����, +//e. external latch without request over line (instant answer after receiving of external latch pulse)) //r. ������� ������� ��� ������� �� ����� (����� ����� ����� ������� �������� �����. �������)) +//e. 2. line receiving/transmission rate //r. 2. �������� ������/�������� �� ����� void B_Dev_Mode(void) { - Device_Mode = rcv_buf[3] & 0x00ff; //e. read the byte of command parameter from the receiver buffer //r. ñ÷èòàòü èç áóôåðà ïðèåìíèêà áàéò ïàðàìåòðà êîìàíäû - //e. and write it to the counter mode register //r. è çàïèñûâàåì â ðåãèñòð ðåæèìà ñ÷åò÷èêîâ - trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ + Device_Mode = rcv_buf[3] & 0x00ff; //e. read the byte of command parameter from the receiver buffer //r. ������� �� ������ ��������� ���� ��������� ������� + //e. and write it to the counter mode register //r. � ���������� � ������� ������ ��������� + trm_cycl = 0; //e. periodic data transmission is not needed //r. ������������� �������� ������ �� ��������� Mk_AskDev(); } // B_Dev_Mode @@ -207,154 +207,154 @@ { Is_BIT = 0; } - trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ + trm_cycl = 0; //e. periodic data transmission is not needed //r. ������������� �������� ������ �� ��������� Mk_AskDev(); } // B_BIT_Mode -void M_Stimul(void) //e. === procedure of output of analog (DAC) and digital (flags) stimuluses //r. === ïðîöåäóðà âûâîäà àíàëîãîâûõ (ÖÀÏ) è äèñêðåòíûõ (ôëàãè) ñòèìóëîâ +void M_Stimul(void) //e. === procedure of output of analog (DAC) and digital (flags) stimuluses //r. === ��������� ������ ���������� (���) � ���������� (�����) �������� { uint32_t chan; - ScopeMode = 4; //e. WP_PHASE_DETECTOR allocate a mode of display for a control point of an scope //r. WP_PHASE_DETECTOR íàçíà÷èòü ðåæèì îòîáðàæåíèÿ äëÿ êîíòðîëüíîé òî÷êè îñöèëëîãðàôà + ScopeMode = 4; //e. WP_PHASE_DETECTOR allocate a mode of display for a control point of an scope //r. WP_PHASE_DETECTOR ��������� ����� ����������� ��� ����������� ����� ������������ - chan = CMD_Code & 0x0007; //e. extracting the number of stimulus //r. âûäåëåíèå íîìåðà ñòèìóëà + chan = CMD_Code & 0x0007; //e. extracting the number of stimulus //r. ��������� ������ ������� Output.ArrayOut[chan] = (((int)rcv_buf[4] << 8) | (int)rcv_buf[5])-0x8000; - if ((CMD_Code & (1 << 7)) == 0) //e. to estimate: whether the answer is required //r. îöåíèòü: òðåáóåòñÿ ëè îòâåò + if ((CMD_Code & (1 << 7)) == 0) //e. to estimate: whether the answer is required //r. �������: ��������� �� ����� { - return; //e. if no - return //r. åñëè íåò - âîçâðàò + return; //e. if no - return //r. ���� ��� - ������� } - Mk_Ask1(); //e. otherwise - answer output //r. èíà÷å - âûäàòü îòâåò + Mk_Ask1(); //e. otherwise - answer output //r. ����� - ������ ����� } // M_Stymul -void M_Status(void) //e. === procedure of initialization of transmission of the device status //r. === ïðîöåäóðà èíèöèàëèçàöèè ïåðåäà÷è ñòàòóñà óñòðîéñòâà +void M_Status(void) //e. === procedure of initialization of transmission of the device status //r. === ��������� ������������� �������� ������� ���������� { - SetSpeedPeriod(); //e. and set the answer transfer rate and its periodicity //r. è óñòàíîâèòü ñêîðîñòü ïåðåäà÷è îòâåòà è åãî ïåðèîäè÷íîñòü + SetSpeedPeriod(); //e. and set the answer transfer rate and its periodicity //r. � ���������� �������� �������� ������ � ��� ������������� - num_of_par = 2; //e. 2 parameters output //r. âûâîäèòü äâà ïàðàìåòðà - addr_param[0] = &blt_in_test; //e. the register address of the self-testing result //r. àäðåñ ðåãèñòðà ðåçóëüòàòà ñàìîòåñòèðîâàíèÿ - addr_param[1] = &ser_num; //e. address of the register of errors of line //r. àäðåñ ðåãèñòðà îøèáîê ëèíèè - size_param[0] = 2; //e. size of the self-test register - 2 bytes //r. ðàçìåð ðåãèñòðà ñàìîòåñòèðîâàíèÿ - 2 áàéòà - size_param[1] = 2; //e. size of the register of errors of line //r. ðàçìåð ðåãèñòðà îøèáîê ëèíèè + num_of_par = 2; //e. 2 parameters output //r. �������� ��� ��������� + addr_param[0] = &blt_in_test; //e. the register address of the self-testing result //r. ����� �������� ���������� ���������������� + addr_param[1] = &ser_num; //e. address of the register of errors of line //r. ����� �������� ������ ����� + size_param[0] = 2; //e. size of the self-test register - 2 bytes //r. ������ �������� ���������������� - 2 ����� + size_param[1] = 2; //e. size of the register of errors of line //r. ������ �������� ������ ����� - trm_rate = 0; //e. set the transfer rate to the 38400 bauds //r. óñòàíîâèòü ñêîðîñòü ïåðåäà÷è 38400 áîä - trm_cycl = 0; //e. forbid cyclic transmission of the parameter //r. çàïðåòèòü ïåðåäà÷ó ïàðàìåòðà â öèêëå - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + trm_rate = 0; //e. set the transfer rate to the 38400 bauds //r. ���������� �������� �������� 38400 ��� + trm_cycl = 0; //e. forbid cyclic transmission of the parameter //r. ��������� �������� ��������� � ����� + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� } // M_Status -void M_Clear(void) //e.---------------- cleaning of the register of errors of line -------------------------- //r.---------------- î÷èñòêà ðåãèñòðà îøèáîê ëèíèè -------------------------- +void M_Clear(void) //e.---------------- cleaning of the register of errors of line -------------------------- //r.---------------- ������� �������� ������ ����� -------------------------- { line_err = 0; } // M_Clear -void M_Tmp_W(void) //e.----------------- write the command to the AD7714 IC ------------------------- //r.----------------- çàïèñü êîìàíäû â ñõåìû AD7714 ------------------------- +void M_Tmp_W(void) //e.----------------- write the command to the AD7714 IC ------------------------- //r.----------------- ������ ������� � ����� AD7714 ------------------------- { Mk_Ask1(); } -void M_Tmp_R(void) //e.----------------- read the data from the AD7714 IC -------------------------- //r.----------------- ÷òåíèå äàííûõ èç ñõåì AD7714 -------------------------- +void M_Tmp_R(void) //e.----------------- read the data from the AD7714 IC -------------------------- //r.----------------- ������ ������ �� ���� AD7714 -------------------------- { } // M_Tmp_R -void M_ADC_R(void) //e.----------------- read the data from the ADCs ADS1250, ADS8321 --------- //r.----------------- ÷òåíèå äàííûõ èç êàíàëîâ ÀÖÏ ADS1250, ADS8321 --------- +void M_ADC_R(void) //e.----------------- read the data from the ADCs ADS1250, ADS8321 --------- //r.----------------- ������ ������ �� ������� ��� ADS1250, ADS8321 --------- { - SetSpeedPeriod(); //e. set the answer transfer rate and its periodicity //r. óñòàíîâèòü ñêîðîñòü ïåðåäà÷è îòâåòà è åãî ïåðèîäè÷íîñòü + SetSpeedPeriod(); //e. set the answer transfer rate and its periodicity //r. ���������� �������� �������� ������ � ��� ������������� UART_SwitchSpeed(trm_rate); - num_of_par = 4; //e. 4 parameters output //r. âûâîäèòü ÷åòûðå ïàðàìåòðà - addr_param[0] = 0; //e. //r. <!-- èñïîëüçîâàëèñü äëÿ ÄÓÏ, òåïåðü íå èñïîëüçóþòñÿ + num_of_par = 4; //e. 4 parameters output //r. �������� ������ ��������� + addr_param[0] = 0; //e. //r. <!-- �������������� ��� ���, ������ �� ������������ addr_param[1] = 0; //e. //r. --> addr_param[2] = 0; - addr_param[3] = &(Input.StrIn.HF_out); //e. set the 4th parameter address _HF_out //r. çàäàòü àäðåñ ÷åòâåðòîãî ïàðàìåòðà _HF_out - size_param[0] = 2; //e. size of the parameters - 2 bytes //r. ðàçìåð ïàðàìåòðîâ - 2 áàéòà + addr_param[3] = &(Input.StrIn.HF_out); //e. set the 4th parameter address _HF_out //r. ������ ����� ���������� ��������� _HF_out + size_param[0] = 2; //e. size of the parameters - 2 bytes //r. ������ ���������� - 2 ����� size_param[1] = 2; size_param[2] = 2; size_param[3] = 2; - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� } // M_ADC_R -void M_Cnt_R(void) //r.----------------- read the counters of the Elio5 card -------------------------- //r.----------------- ÷òåíèå ñ÷åò÷èêîâ ïëàòû Elio5 -------------------------- +void M_Cnt_R(void) //r.----------------- read the counters of the Elio5 card -------------------------- //r.----------------- ������ ��������� ����� Elio5 -------------------------- { - SetSpeedPeriod(); //e. set the answer transfer rate and its periodicity //r. óñòàíîâèòü ñêîðîñòü ïåðåäà÷è îòâåòà è åãî ïåðèîäè÷íîñòü + SetSpeedPeriod(); //e. set the answer transfer rate and its periodicity //r. ���������� �������� �������� ������ � ��� ������������� UART_SwitchSpeed(trm_rate); - num_of_par = 2; //e. 2 parameters output //r. âûâîäèòü äâà ïàðàìåòðà + num_of_par = 2; //e. 2 parameters output //r. �������� ��� ��������� - addr_param[0] = &(Output.Str.Cnt_Pls); //e. set the first parameter address //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà - addr_param[1] = &(Output.Str.Cnt_Mns); //e. set the second paremeter address //r. çàäàòü àäðåñ âòîðîãî ïàðàìåòðà - size_param[0] = 2; //e. size of the parameters - 2 bytes //r. ðàçìåð ïàðàìåòðîâ - 2 áàéòà + addr_param[0] = &(Output.Str.Cnt_Pls); //e. set the first parameter address //r. ������ ����� ������� ��������� + addr_param[1] = &(Output.Str.Cnt_Mns); //e. set the second paremeter address //r. ������ ����� ������� ��������� + size_param[0] = 2; //e. size of the parameters - 2 bytes //r. ������ ���������� - 2 ����� size_param[1] = 2; - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� } // M_Cnt_R -/*void M_e5r_W(void) //r.----------------- write to the mode register of the Elio5 card ------------------ //r.----------------- çàïèñü â ðåãèñòð ðåæèìà ïëàòû Elio5 ------------------ +/*void M_e5r_W(void) //r.----------------- write to the mode register of the Elio5 card ------------------ //r.----------------- ������ � ������� ������ ����� Elio5 ------------------ { - //e. read the byte of command parameter from the receiver buffer //r. ñ÷èòàòü èç áóôåðà ïðèåìíèêà áàéò ïàðàìåòðà êîìàíäû - //e. and write it to the card mode register and its copy //r. è çàïèñàòü åãî â ðåãèñòð ðåæèìà ïëàòû è â åãî êîïèþ + //e. read the byte of command parameter from the receiver buffer //r. ������� �� ������ ��������� ���� ��������� ������� + //e. and write it to the card mode register and its copy //r. � �������� ��� � ������� ������ ����� � � ��� ����� #if !defined COMMAND_DEBUG Copy_e5_RgR = rcv_buf[3]; io_space_write(E5_RGR, Copy_e5_RgR); #endif - trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ + trm_cycl = 0; //e. periodic data transmission is not needed //r. ������������� �������� ������ �� ��������� Mk_Ask1(); } // M_e5r_W */ /* -void M_e5rA_W(void) //e.----- write to the 1st additional mode register of the Elio5 card ---------- //r.----- çàïèñü â 1-ûé äîïîëíèòåëüíûé ðåãèñòð ðåæèìà ïëàòû Elio5 ---------- +void M_e5rA_W(void) //e.----- write to the 1st additional mode register of the Elio5 card ---------- //r.----- ������ � 1-�� �������������� ������� ������ ����� Elio5 ---------- { - //e. this command is used for switching a signal on which data counters are latched: //r. ýòà êîìàíäà èñïîëüçóåòñÿ äëÿ ïåðåêëþ÷åíèÿ ñèãíàëà, ïî êîòîðîìó çàùåëêèâàþòñÿ - //e. on the Reper signal or on Sign Meander //r. èíôîðìàöèîííûå ñ÷åò÷èêè: ëèáî ïî Reper`ó ëèáî ïî RefMeandr`ó + //e. this command is used for switching a signal on which data counters are latched: //r. ��� ������� ������������ ��� ������������ �������, �� �������� ������������� + //e. on the Reper signal or on Sign Meander //r. �������������� ��������: ���� �� Reper`� ���� �� RefMeandr`� - //e. read the byte of command parameter from the receiver buffer //r. ñ÷èòàòü èç áóôåðà ïðèåìíèêà áàéò ïàðàìåòðà êîìàíäû - //e. and write it to the card mode register and its copy //r. è çàïèñàòü åãî â ðåãèñòð ðåæèìà ïëàòû è â åãî êîïèþ + //e. read the byte of command parameter from the receiver buffer //r. ������� �� ������ ��������� ���� ��������� ������� + //e. and write it to the card mode register and its copy //r. � �������� ��� � ������� ������ ����� � � ��� ����� Copy_e5_RgRA = rcv_buf[3]; -//??? Device_Mode = Copy_e5_RgRA; //e. and write it to the counter mode register //r. è çàïèñûâàåì â ðåãèñòð ðåæèìà ñ÷åò÷èêîâ +//??? Device_Mode = Copy_e5_RgRA; //e. and write it to the counter mode register //r. � ���������� � ������� ������ ��������� #if !defined COMMAND_DEBUG io_space_write(E5_RGRA, Copy_e5_RgRA); #endif - trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ + trm_cycl = 0; //e. periodic data transmission is not needed //r. ������������� �������� ������ �� ��������� Mk_Ask1(); } // M_e5rA_W */ -void M_Ctl_R(void) //r.----------------- reading the control register of the device ----------------- //r.----------------- ÷òåíèå ðåãèñòðà óïðàâëåíèÿ óñòðîéñòâà ----------------- +void M_Ctl_R(void) //r.----------------- reading the control register of the device ----------------- //r.----------------- ������ �������� ���������� ���������� ----------------- { - num_of_par = 2; //e. 2 parameters transfer //r. ïåðåäàâàòü 2 ïàðàìåòðà - addr_param[0] = &CMD_Code; //e. the first parameter in answer - returned command code //r. ïåðâûé ïàðàìåòð â îòâåòå - âîçâðàùàåìûé êîä êîìàíäû + num_of_par = 2; //e. 2 parameters transfer //r. ���������� 2 ��������� + addr_param[0] = &CMD_Code; //e. the first parameter in answer - returned command code //r. ������ �������� � ������ - ������������ ��� ������� size_param[0] = 2; - size_param[1] = 2; //e. two bytes also have control registers //r. äâà áàéòà èìåþò òàêæå è ðåãèñòðû óïðàâëåíèÿ - if ((rcv_buf[3] & (1 << 4)) == 0) //e. is main control register needed? //r. òðåáóåòñÿ îñíîâíîé ðåãèñòð óïðàâëåíèÿ? + size_param[1] = 2; //e. two bytes also have control registers //r. ��� ����� ����� ����� � �������� ���������� + if ((rcv_buf[3] & (1 << 4)) == 0) //e. is main control register needed? //r. ��������� �������� ������� ����������? { - addr_param[1] = &RgConA; //e. yes //r. äà + addr_param[1] = &RgConA; //e. yes //r. �� } else { - addr_param[1] = &RgConB; //e. otherwise - load the address of the addititonal register //r. èíà÷å - çàãðóçèòü àäðåñ äîïîëíèòåëüíîãî ðåãèñòðà + addr_param[1] = &RgConB; //e. otherwise - load the address of the addititonal register //r. ����� - ��������� ����� ��������������� �������� } - CMD_Code &= 0xff10; //e. clear in it bit of errors and byte number //r. ñáðîñèòü â íåì ïîëÿ îøèáîê è íîìåðà áèòà - trm_ena = 1; //e. allow operation of the transmitter of line //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà ëèíèè + CMD_Code &= 0xff10; //e. clear in it bit of errors and byte number //r. �������� � ��� ���� ������ � ������ ���� + trm_ena = 1; //e. allow operation of the transmitter of line //r. ��������� ������ ����������� ����� } // M_Ctl_R -void M_Ctl_M(void) //r.----------------- modification of the control register of the device ------------ //r.----------------- ìîäèôèêàöèÿ ðåãèñòðà óïðàâëåíèÿ óñòðîéñòâà ------------ +void M_Ctl_M(void) //r.----------------- modification of the control register of the device ------------ //r.----------------- ����������� �������� ���������� ���������� ------------ { uint32_t * ptr; uint32_t bit_numb; - num_of_par = 2; //e. 2 parameters transfer //r. ïåðåäàâàòü 2 ïàðàìåòðà - addr_param[0] = &CMD_Code; //e. the first parameter in answer - returned command code //r. ïåðâûé ïàðàìåòð â îòâåòå - âîçâðàùàåìûé êîä êîìàíäû + num_of_par = 2; //e. 2 parameters transfer //r. ���������� 2 ��������� + addr_param[0] = &CMD_Code; //e. the first parameter in answer - returned command code //r. ������ �������� � ������ - ������������ ��� ������� size_param[0] = 2; - size_param[1] = 2; //e. two bytes also have control registers //r. äâà áàéòà èìåþò òàêæå è ðåãèñòðû óïðàâëåíèÿ - if ((CMD_Code & (1 << 4)) == 0) //e. is main control register needed? //r. òðåáóåòñÿ îñíîâíîé ðåãèñòð óïðàâëåíèÿ? + size_param[1] = 2; //e. two bytes also have control registers //r. ��� ����� ����� ����� � �������� ���������� + if ((CMD_Code & (1 << 4)) == 0) //e. is main control register needed? //r. ��������� �������� ������� ����������? { - ptr = &RgConA; //e. yes //r. äà + ptr = &RgConA; //e. yes //r. �� } else { - ptr = &RgConB; //e. otherwise - load the address of the addititonal register //r. èíà÷å - çàãðóçèòü àäðåñ äîïîëíèòåëüíîãî ðåãèñòðà + ptr = &RgConB; //e. otherwise - load the address of the addititonal register //r. ����� - ��������� ����� ��������������� �������� } - addr_param[1] = ptr; //e. the second parameter in answer - modified register //r. âòîðîé ïàðàìåòð â îòâåòå - ìîäèôèöèðîâàííûé ðåãèñòð + addr_param[1] = ptr; //e. the second parameter in answer - modified register //r. ������ �������� � ������ - ���������������� ������� - bit_numb = CMD_Code & 0x000f; //e. extract the number of the changeable bit //r. âûäåëèòü íîìåð èçìåíÿåìîãî áèòà + bit_numb = CMD_Code & 0x000f; //e. extract the number of the changeable bit //r. �������� ����� ����������� ���� if ((CMD_Code & (1 << 7)) == 0) // Is clear bit { *ptr &= ~(1 << bit_numb); // yes, clear bit @@ -364,84 +364,84 @@ *ptr |= 1 << bit_numb; // no, set bit } - CMD_Code &= 0xff10; //e. clear in command bit of errors and byte number //r. ñáðîñèòü â êîìàíäå ïîëÿ îøèáîê è íîìåðà áèòà - trm_cycl = 0; //e. forbid cyclic transmission of the parameter //r. çàïðåòèòü ïåðåäà÷ó ïàðàìåòðà â öèêëå - trm_ena = 1; //e. allow operation of the transmitter of line //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà ëèíèè + CMD_Code &= 0xff10; //e. clear in command bit of errors and byte number //r. �������� � ������� ���� ������ � ������ ���� + trm_cycl = 0; //e. forbid cyclic transmission of the parameter //r. ��������� �������� ��������� � ����� + trm_ena = 1; //e. allow operation of the transmitter of line //r. ��������� ������ ����������� ����� } // M_Ctl_M -void M_Flg_R(void) //e.------------ reading the register of input flags --------------------------- //r.------------ ÷òåíèå ðåãèñòðà âõîäíûõ ôëàãîâ --------------------------- +void M_Flg_R(void) //e.------------ reading the register of input flags --------------------------- //r.------------ ������ �������� ������� ������ --------------------------- { - num_of_par = 1; //e. 1 parameter output //r. âûâîäèòü îäèí ïàðàìåòð - addr_param[0] = &In_Flag; //e. the address of the flag register copy //r. àäðåñ êîïèè ðåãèñòðà ôëàãîâ - size_param[0] = 2; //e. size of the buffer - 2 bytes //r. ðàçìåð áóôåðà - 2 áàéòà - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + num_of_par = 1; //e. 1 parameter output //r. �������� ���� �������� + addr_param[0] = &In_Flag; //e. the address of the flag register copy //r. ����� ����� �������� ������ + size_param[0] = 2; //e. size of the buffer - 2 bytes //r. ������ ������ - 2 ����� + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� } // M_Flg_R -void M_Vib_W(void) //r.------------ set the oscillation period of the dither drive ----------------- //r.------------ óñòàíîâêà ïåðèîäà êîëåáàíèé âèáðîïðèâîäà ----------------- +void M_Vib_W(void) //r.------------ set the oscillation period of the dither drive ----------------- //r.------------ ��������� ������� ��������� ������������ ----------------- { - ScopeMode = 1; //e. VB_PHASE_DETECTOR allocate a mode of display for a control point of an scope //r. VB_PHASE_DETECTOR íàçíà÷èòü ðåæèì îòîáðàæåíèÿ äëÿ êîíòðîëüíîé òî÷êè îñöèëëîãðàôà + ScopeMode = 1; //e. VB_PHASE_DETECTOR allocate a mode of display for a control point of an scope //r. VB_PHASE_DETECTOR ��������� ����� ����������� ��� ����������� ����� ������������ - Output.Str.T_Vibro = (rcv_buf[4] << 8) | (rcv_buf[5] & 0xFF); //e. new variable of the period //r. íîâàÿ ïåðåìåííàÿ ïåðèîäà + Output.Str.T_Vibro = (rcv_buf[4] << 8) | (rcv_buf[5] & 0xFF); //e. new variable of the period //r. ����� ���������� ������� /* sprintf(BuffTemp1, "\n\r F = %d ", Output.Str.T_Vibro); SendToBuff(BuffTemp1,15);*/ - Output.Str.L_Vibro= (rcv_buf[6] << 8) | (rcv_buf[7] & 0xFF); //e. new variable of the pulse width //r. íîâàÿ ïåðåìåííàÿ äëèòåëüíîñòè èìïóëüñîâ + Output.Str.L_Vibro= (rcv_buf[6] << 8) | (rcv_buf[7] & 0xFF); //e. new variable of the pulse width //r. ����� ���������� ������������ ��������� /*sprintf(BuffTemp1, "\n\r L = %d ", Output.Str.L_Vibro); SendToBuff(BuffTemp1,15);*/ - VibroDither_Set(); //e. and output its value to period registers on card //r. âûâåñòè åå çíà÷åíèå â ðåãèñòðû ïåðèîäà íà ïëàòå + VibroDither_Set(); //e. and output its value to period registers on card //r. ������� �� �������� � �������� ������� �� ����� - trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ + trm_cycl = 0; //e. periodic data transmission is not needed //r. ������������� �������� ������ �� ��������� Mk_Ask1(); } // M_Vib_W -void M_Gph_W(void) //e.------------ set the gain factor of photodetector channels ------------------- //r.------------ óñòàíîâêà óñèëåíèÿ êàíàëîâ ôîòîïðèåìíèêà ------------------- +void M_Gph_W(void) //e.------------ set the gain factor of photodetector channels ------------------- //r.------------ ��������� �������� ������� ������������� ------------------- { - Device_blk.Str.Gain_Ph_A = rcv_buf[4]; //e. read from the receiver buffer the value of the gain factor of the A channel //r. ñ÷èòàòü èç áóôåðà ïðèåìíèêà çíà÷åíèå óñèëåíèÿ êàíàëà À - Device_blk.Str.Gain_Ph_B = rcv_buf[5]; //e. read from the receiver buffer the value of the gain factor of the B channel //r. ñ÷èòàòü èç áóôåðà ïðèåìíèêà çíà÷åíèå óñèëåíèÿ êàíàëà  + Device_blk.Str.Gain_Ph_A = rcv_buf[4]; //e. read from the receiver buffer the value of the gain factor of the A channel //r. ������� �� ������ ��������� �������� �������� ������ � + Device_blk.Str.Gain_Ph_B = rcv_buf[5]; //e. read from the receiver buffer the value of the gain factor of the B channel //r. ������� �� ������ ��������� �������� �������� ������ � - Out_G_photo(Device_blk.Str.Gain_Ph_A, Device_blk.Str.Gain_Ph_B); //e. display these values to digital potentiometers //r. âûâåñòè ýòè çíà÷åíèÿ â öèôðîâûå ïîòåíöèîìåòðû + Out_G_photo(Device_blk.Str.Gain_Ph_A, Device_blk.Str.Gain_Ph_B); //e. display these values to digital potentiometers //r. ������� ��� �������� � �������� ������������� - trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ + trm_cycl = 0; //e. periodic data transmission is not needed //r. ������������� �������� ������ �� ��������� Mk_Ask1(); } // M_Gph_W -void M_Rate(void) //e.------------ start of transfer of the M_Rate parameters stack ------------------- //r.------------ çàïóñê ïåðåäà÷è íàáîðà ïàðàìåòðîâ M_Rate ------------------- +void M_Rate(void) //e.------------ start of transfer of the M_Rate parameters stack ------------------- //r.------------ ������ �������� ������ ���������� M_Rate ------------------- { uint8_t mode; - SetSpeedPeriod(); //e. set the answer transfer rate and its periodicity //r. óñòàíîâèòü ñêîðîñòü ïåðåäà÷è îòâåòà è åãî ïåðèîäè÷íîñòü + SetSpeedPeriod(); //e. set the answer transfer rate and its periodicity //r. ���������� �������� �������� ������ � ��� ������������� UART_SwitchSpeed(trm_rate); - mode = rcv_buf[3] & 0x001f; //e. extract number of the parameters stack in the command //r. âûäåëèòü íîìåð íàáîðà ïàðàìåòðîâ â êîìàíäå + mode = rcv_buf[3] & 0x001f; //e. extract number of the parameters stack in the command //r. �������� ����� ������ ���������� � ������� switch (mode) { - case 1: //e. it is the Rate stack //r. ýòî íàáîð Rate + case 1: //e. it is the Rate stack //r. ��� ����� Rate RgConB = RATE_REPER_OR_REFMEANDR; //e. counter latch every vibro period SwitchRefMeandInt(RATE_REPER_OR_REFMEANDR); //e. enable reference meander interrupt - wrk_period = 12500000; //e. load needed length of working period 1 ñ.//r. çàãðóçèòü òðåáóåìóþ äëèòåëüíîñòü ðàáî÷åãî ïåðèîäà 1 ñ. - num_of_par = 14; //e. 9 parameters or groups of parameters output //r. âûâîäèòü 9 ïàðàìåòðîâ èëè ãðóïï ïàðàìåòðîâ + wrk_period = 12500000; //e. load needed length of working period 1 �.//r. ��������� ��������� ������������ �������� ������� 1 �. + num_of_par = 14; //e. 9 parameters or groups of parameters output //r. �������� 9 ���������� ��� ����� ���������� Valid_Data = 0; // reset all bits of status word - addr_param[0] = &(Output.Str.Cnt_Pls); //e. set the address of the 1st parameter in the 1st group //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà â 1-îé ãðóïïå - addr_param[1] = &(Output.Str.Cnt_Mns); //e. set the address of the 1st parameter in the 2nd group //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà â 2-îé ãðóïïå - addr_param[2] = &(Output.Str.Cnt_Dif); //e. set the address of the 1st parameter in the 3rd group //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà â 3-îé ãðóïïå - addr_param[3] = &(Output.Str.F_ras); //e. set the address of the _F_ras parameter in the 4th group //r. çàäàòü àäðåñ ïàðàìåòðà _F_ras âî 4-îé ãðóïïå - addr_param[4] = &(Output.Str.HF_reg); //e. set the address of the _HF_reg parameter in the 5th group //r. çàäàòü àäðåñ ïàðàìåòðà _HF_reg â 5-åé ãðóïïå - addr_param[5] = &(Output.Str.HF_dif); //e. set the address of the _HF_dif parameter in the 6th group //r. çàäàòü àäðåñ ïàðàìåòðà _HF_dif â 6-îé ãðóïïå - addr_param[6] = &(Output.Str.T_Vibro); //e. parameter _T_Vibro //r. ïàðàìåòð _T_Vibro - addr_param[7] = &(Output.Str.T_VB_pll); //e. parameter _T_VB_pll //r.ïàðàìåòðâ _T_VB_pll - addr_param[8] = &(Output.Str.L_Vibro); //e. parameter _L_Vibro //r. ïàðàìåòð _L_Vibro - addr_param[9] = &(Input.StrIn.HF_out); //e. set the address of the _RI_reg parameter in the 8th group //r. çàäàòü àäðåñ ïàðàìåòðà _RI_reg â 8-îé ãðóïïå - addr_param[10] = &(Output.Str.WP_reg); //e. parameters: _WP_reg, _WP_pll //r. ïàðàìåòðîâ _WP_reg, _WP_pll - addr_param[11] = &(Output.Str.WP_pll); //e. parameters: _WP_reg, _WP_pll //r. ïàðàìåòðîâ _WP_reg, _WP_pll - addr_param[12] = &(Output.Str.Tmp_Out); //e. set the address of the temperature sensors array //r. çàäàòü àäðåñ ìàññèâà äàò÷èêîâ òåìïåðàòóðû - addr_param[13] = &(Output.Str.WP_scope1); //e. reserved //r. çàðåçåðâèðîâàíî äëÿ äàëüíåéøèõ ïðèìåíåíèé + addr_param[0] = &(Output.Str.Cnt_Pls); //e. set the address of the 1st parameter in the 1st group //r. ������ ����� ������� ��������� � 1-�� ������ + addr_param[1] = &(Output.Str.Cnt_Mns); //e. set the address of the 1st parameter in the 2nd group //r. ������ ����� ������� ��������� � 2-�� ������ + addr_param[2] = &(Output.Str.Cnt_Dif); //e. set the address of the 1st parameter in the 3rd group //r. ������ ����� ������� ��������� � 3-�� ������ + addr_param[3] = &(Output.Str.F_ras); //e. set the address of the _F_ras parameter in the 4th group //r. ������ ����� ��������� _F_ras �� 4-�� ������ + addr_param[4] = &(Output.Str.HF_reg); //e. set the address of the _HF_reg parameter in the 5th group //r. ������ ����� ��������� _HF_reg � 5-�� ������ + addr_param[5] = &(Output.Str.HF_dif); //e. set the address of the _HF_dif parameter in the 6th group //r. ������ ����� ��������� _HF_dif � 6-�� ������ + addr_param[6] = &(Output.Str.T_Vibro); //e. parameter _T_Vibro //r. �������� _T_Vibro + addr_param[7] = &(Output.Str.T_VB_pll); //e. parameter _T_VB_pll //r.��������� _T_VB_pll + addr_param[8] = &(Output.Str.L_Vibro); //e. parameter _L_Vibro //r. �������� _L_Vibro + addr_param[9] = &(Input.StrIn.HF_out); //e. set the address of the _RI_reg parameter in the 8th group //r. ������ ����� ��������� _RI_reg � 8-�� ������ + addr_param[10] = &(Output.Str.WP_reg); //e. parameters: _WP_reg, _WP_pll //r. ���������� _WP_reg, _WP_pll + addr_param[11] = &(Output.Str.WP_pll); //e. parameters: _WP_reg, _WP_pll //r. ���������� _WP_reg, _WP_pll + addr_param[12] = &(Output.Str.Tmp_Out); //e. set the address of the temperature sensors array //r. ������ ����� ������� �������� ����������� + addr_param[13] = &(Output.Str.WP_scope1); //e. reserved //r. ��������������� ��� ���������� ���������� - size_param[0] = 2; //e. groups 1-6, 8-10 consists of one parameter ... //r. ãðóïïû 1-6, 8-10 ñîäåðæàò ïî îäíîìó ïàðàìåòðó - size_param[1] = 2; //e. and have 2 bytes length each //r. è èìåþò äëèíó 2 áàéòà êàæäàÿ + size_param[0] = 2; //e. groups 1-6, 8-10 consists of one parameter ... //r. ������ 1-6, 8-10 �������� �� ������ ��������� + size_param[1] = 2; //e. and have 2 bytes length each //r. � ����� ����� 2 ����� ������ size_param[2] = 2; size_param[3] = 2; size_param[4] = 2; @@ -453,76 +453,76 @@ size_param[10] = 2; size_param[11] = 2; - size_param[13] = 4; //e. the 11th group parameters has length of 4 bytes //r. 11-z ãðóïïà ïàðàìåòðîâ èìååò äëèíó 4 áàéòà + size_param[13] = 4; //e. the 11th group parameters has length of 4 bytes //r. 11-z ������ ���������� ����� ����� 4 ����� - size_param[12] = 12; //e. format o the GLD array of temperatures - 12 bytes //r. ôîðìàò ìàññèâà òåìïåðàòóð ÃËÄ - 12 áàéò + size_param[12] = 12; //e. format o the GLD array of temperatures - 12 bytes //r. ������ ������� ���������� ��� - 12 ���� - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� break; - case 2: //e. it is the Rate2 stack //r. ýòî íàáîð Rate2 + case 2: //e. it is the Rate2 stack //r. ��� ����� Rate2 RgConB = RATE_REPER_OR_REFMEANDR; SwitchRefMeandInt(RATE_REPER_OR_REFMEANDR); //e. enable interrupt from ref. meander - wrk_period = 0; //e. frequency of output = fvibro //r. ÷àñòîòà âûâîäà ðàâíà ÷àñòîòå ÂÏ + wrk_period = 0; //e. frequency of output = fvibro //r. ������� ������ ����� ������� �� - num_of_par = 2; //e. 2 parameters output //r. âûâîäèòü 2 ïàðàìåòðà + num_of_par = 2; //e. 2 parameters output //r. �������� 2 ��������� - addr_param[0] = &(Output.Str.Cnt_Pls); //e. set the first parameter address //r. çàäàòü àäðåñ ïåðâîãî ïàðàìåòðà - addr_param[1] = &(Output.Str.Cnt_Mns); //e. and the 2nd //r. è âòîðîãî - size_param[0] = 2; //e. parameters has 2 bytes length //r. ïàðàìåòðû èìååò äëèíó 2 áàéòà + addr_param[0] = &(Output.Str.Cnt_Pls); //e. set the first parameter address //r. ������ ����� ������� ��������� + addr_param[1] = &(Output.Str.Cnt_Mns); //e. and the 2nd //r. � ������� + size_param[0] = 2; //e. parameters has 2 bytes length //r. ��������� ����� ����� 2 ����� size_param[1] = 2; - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� break; - case 3: //e. it is the Rate3 stack //r. ýòî íàáîð Rate3 + case 3: //e. it is the Rate3 stack //r. ��� ����� Rate3 - wrk_period = 2500; //e. frequency of output = 10000 Hz //r. n=1, ÷àñòîòà âûâîäà = 10000 Hz - num_of_par = 2; //e. 2 parameters output //r. âûâîäèòü 2 ïàðàìåòðà + wrk_period = 2500; //e. frequency of output = 10000 Hz //r. n=1, ������� ������ = 10000 Hz + num_of_par = 2; //e. 2 parameters output //r. �������� 2 ��������� - addr_param[0] = &(Output.Str.WP_scope1); //e. set the addresses of output parameters //r. çàäàòü àäðåñà âûâîäèìûõ ïàðàìåòðîâ + addr_param[0] = &(Output.Str.WP_scope1); //e. set the addresses of output parameters //r. ������ ������ ��������� ���������� addr_param[1] = &(Output.Str.WP_scope2); - size_param[0] = 2; //e. all parameters has 2 bytes length //r. âñå ïàðàìåòðû èìåþò äëèíó 2 áàéòà + size_param[0] = 2; //e. all parameters has 2 bytes length //r. ��� ��������� ����� ����� 2 ����� size_param[1] = 2; - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� break; - case 4: //e. it is the Rate4 stack //r. ýòî íàáîð Rate4 - wrk_period = 20000; //e. correspond to output frequency 1.25 kHz //r. ñîîòâåñòâóåò ÷àñòîòå âûâîäà 1.25 kHz - num_of_par = 4; //e. 4 parameters output //r. âûâîäèòü 4 ïàðàìåòðà + case 4: //e. it is the Rate4 stack //r. ��� ����� Rate4 + wrk_period = 20000; //e. correspond to output frequency 1.25 kHz //r. ������������ ������� ������ 1.25 kHz + num_of_par = 4; //e. 4 parameters output //r. �������� 4 ��������� - //e. set the addresses of output parameters //r. çàäàòü àäðåñà âûâîäèìûõ ïàðàìåòðîâ + //e. set the addresses of output parameters //r. ������ ������ ��������� ���������� // --- raw data array of numbers --- // addr_param[0] = &Dif_Curr_Array; // --- filtered array of numbers --- // addr_param[1] = &Dif_Filt_Array; // --------------------------------- - addr_param[2] = &(Output.Str.HF_reg); //e. HFO regulator //r. íàïðÿæåíèå ÃÂ× - addr_param[3] = &(Output.Str.WP_reg); //e. CPLC heater regulator //r. íàïðÿæåíèå íàãðåâàòåëÿ + addr_param[2] = &(Output.Str.HF_reg); //e. HFO regulator //r. ���������� ��� + addr_param[3] = &(Output.Str.WP_reg); //e. CPLC heater regulator //r. ���������� ����������� size_param[0] = 16; size_param[1] = 32; size_param[2] = 2; size_param[3] = 2; - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� break; case 7: - wrk_period = 20000; //e. correspond to output frequency 1250 Hz //r. ñîîòâåñòâóåò ÷àñòîòå âûâîäà 1.25 kHz - num_of_par = 5; //e. 4 parameters output //r. âûâîäèòü 5 ïàðàìåòðà + wrk_period = 20000; //e. correspond to output frequency 1250 Hz //r. ������������ ������� ������ 1.25 kHz + num_of_par = 5; //e. 4 parameters output //r. �������� 5 ��������� - //e. set the addresses of output parameters //r. çàäàòü àäðåñà âûâîäèìûõ ïàðàìåòðîâ + //e. set the addresses of output parameters //r. ������ ������ ��������� ���������� // --- raw data array of PLC phase --- addr_param[0] = &(Output.Str.WP_Phase_Det_Array); // --- filtered array of reference sin--- addr_param[1] = &(Output.Str.WP_sin_Array); // --------------------------------- - addr_param[2] = &(Output.Str.WP_reg); //e. CPLC heater regulator //r. íàïðÿæåíèå íàãðåâàòåëÿ - addr_param[3] = &(Output.Str.WP_pll); //e. CPLC phase //r. ôàçà - addr_param[4] = &(Output.Str.HF_reg); //e. set the address of the _HF_reg parameter in the 5th group //r. çàäàòü àäðåñ ïàðàìåòðà _HF_reg â 5-åé ãðóïïå + addr_param[2] = &(Output.Str.WP_reg); //e. CPLC heater regulator //r. ���������� ����������� + addr_param[3] = &(Output.Str.WP_pll); //e. CPLC phase //r. ���� + addr_param[4] = &(Output.Str.HF_reg); //e. set the address of the _HF_reg parameter in the 5th group //r. ������ ����� ��������� _HF_reg � 5-�� ������ size_param[0] = 16; size_param[1] = 16; size_param[2] = 2; size_param[3] = 2; size_param[4] = 2; - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� break; } SetIntLatch(wrk_period); @@ -533,116 +533,116 @@ while(1); } // will not achieve -void M_Param_R(void) //e. ------------ read the parameter of the GLD from the data memory ---------------------- //r.------------ ÷òåíèå ïàðàìåòðà GLD èç ïàìÿòè äàííûõ ---------------------- +void M_Param_R(void) //e. ------------ read the parameter of the GLD from the data memory ---------------------- //r.------------ ������ ��������� GLD �� ������ ������ ---------------------- { - num_of_par = 1; //e. 1 parameter output //r. âûâîäèòü îäèí ïàðàìåòð - addr_param[0] = (void *)(&Device_blk.Str.My_Addres + rcv_buf[3]); //e. address of the needed parameter in the block //r. àäðåñ òðåáóåìîãî ïàðàìåòðà â áëîêå - size_param[0] = 2; //e. size of the buffer - 2 bytes //r. ðàçìåð áóôåðà - 2 áàéòà + num_of_par = 1; //e. 1 parameter output //r. �������� ���� �������� + addr_param[0] = (void *)(&Device_blk.Str.My_Addres + rcv_buf[3]); //e. address of the needed parameter in the block //r. ����� ���������� ��������� � ����� + size_param[0] = 2; //e. size of the buffer - 2 bytes //r. ������ ������ - 2 ����� - trm_ena = 1; //e. allow operation of the transmitter //r. ðàçðåøèòü ðàáîòó ïåðåäàò÷èêà + trm_ena = 1; //e. allow operation of the transmitter //r. ��������� ������ ����������� } // M_Param_R -void M_Param_W(void) //e.------------ write the parameter of the GLD from the data memory ----------------------- //r.------------ çàïèñü ïàðàìåòðà GLD â ïàìÿòü äàííûõ ----------------------- +void M_Param_W(void) //e.------------ write the parameter of the GLD from the data memory ----------------------- //r.------------ ������ ��������� GLD � ������ ������ ----------------------- { int * ptr; - ScopeMode = 0; //e. VB_DELAY_MEANDER allocate a mode of display for a control point of an scope //r. VB_DELAY_MEANDER íàçíà÷èòü ðåæèì îòîáðàæåíèÿ äëÿ êîíòðîëüíîé òî÷êè îñöèëëîãðàôà + ScopeMode = 0; //e. VB_DELAY_MEANDER allocate a mode of display for a control point of an scope //r. VB_DELAY_MEANDER ��������� ����� ����������� ��� ����������� ����� ������������ ptr = (int *)&Device_blk.Str.My_Addres; // pointer to Parameters block ptr += rcv_buf[3]; // calculate offset *ptr = (rcv_buf[4] << 8) | (rcv_buf[5] & 0xFF); // write new parameter value - trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ + trm_cycl = 0; //e. periodic data transmission is not needed //r. ������������� �������� ������ �� ��������� Mk_Ask1(); } // M_Param_W -void M_LdPar_F() //e.============ procedure for load the GLD parameters from the flash-memory =========== //r.============ ïðîöåäóðà çàãðóçêè ïàðàìåòðîâ ÃËÄ èç ôëýø-ïàìÿòè =========== +void M_LdPar_F() //e.============ procedure for load the GLD parameters from the flash-memory =========== //r.============ ��������� �������� ���������� ��� �� ����-������ =========== { - LoadFlashParam(FromFLASH); //e. load the GLD parameters from the flash-memory //r. çàãðóçèòü ïàðàìåòðû ÃËÄ èç ôäýø-ïàìÿòè + LoadFlashParam(FromFLASH); //e. load the GLD parameters from the flash-memory //r. ��������� ��������� ��� �� ����-������ blt_in_test = ((uint32_t)FIRMWARE_VER << 8) | (Device_blk.Str.Device_SerialNumber & 0x00FF); // Init_software(); - trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ + trm_cycl = 0; //e. periodic data transmission is not needed //r. ������������� �������� ������ �� ��������� Mk_Ask1(); } // M_LdPar_F -void M_LdPar_D(void) //e.============ procedure for set parameters of the GLD by default ============ //r.============ ïðîöåäóðà óñòàíîâêè ïàðàìåòðîâ ÃËÄ ïî óìîë÷àíèþ ============ +void M_LdPar_D(void) //e.============ procedure for set parameters of the GLD by default ============ //r.============ ��������� ��������� ���������� ��� �� ��������� ============ { #if !defined COMMAND_DEBUG - LoadFlashParam(ByDefault); //e. define parameters of the GLD by default //r. îïðåäåëèòü ïàðàìåòðû ÃËÄ ïî óìîë÷àíèþ (default) + LoadFlashParam(ByDefault); //e. define parameters of the GLD by default //r. ���������� ��������� ��� �� ��������� (default) Init_software(); #endif - trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ + trm_cycl = 0; //e. periodic data transmission is not needed //r. ������������� �������� ������ �� ��������� Mk_Ask1(); } // M_LdPar_D -void M_Start(void) //e.============ initialization of the GLD switch on ================================= //r.============ èíèöèàëèçàöèÿ çàïóñêà ÃËÄ ================================= +void M_Start(void) //e.============ initialization of the GLD switch on ================================= //r.============ ������������� ������� ��� ================================= { - start_Rq = 1; //e. set the flag of the GLD switch on request //r. óñòàíîâèòü ôëàã çàïðîñà ñòàðòà ÃËÄ - trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ + start_Rq = 1; //e. set the flag of the GLD switch on request //r. ���������� ���� ������� ������ ��� + trm_cycl = 0; //e. periodic data transmission is not needed //r. ������������� �������� ������ �� ��������� Mk_Ask1(); } // M_Start -void M_Stop(void) //e.============ initialization of the GLD switch off ============================== //r.============ èíèöèàëèçàöèÿ âûêëþ÷åíèÿ ÃËÄ ============================== +void M_Stop(void) //e.============ initialization of the GLD switch off ============================== //r.============ ������������� ���������� ��� ============================== { - stop_Rq = 1; //e. set the flag of the GLD switch off request //r. óñòàíîâèòü ôëàã çàïðîñà âûêëþ÷åíèÿ ÃËÄ - trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ + stop_Rq = 1; //e. set the flag of the GLD switch off request //r. ���������� ���� ������� ���������� ��� + trm_cycl = 0; //e. periodic data transmission is not needed //r. ������������� �������� ������ �� ��������� Mk_Ask1(); } // M_Stop -void M_Pulse(void) //e.============ generetion of the light-up pulse ========================= //r.============ ãåíåðàöèÿ èìïóëüñà çàïóñêà ëàçåðà ========================= +void M_Pulse(void) //e.============ generetion of the light-up pulse ========================= //r.============ ��������� �������� ������� ������ ========================= { - pulse_Rq = 1; //e. set the flag of the GLD switch on request //r. óñòàíîâèòü ôëàã çàïðîñà ñòàðòà ÃËÄ - trm_cycl = 0; //e. periodic data transmission is not needed //r. ïåðèîäè÷åñêàÿ ïåðåäà÷à îòâåòà íå òðåáóåòñÿ + pulse_Rq = 1; //e. set the flag of the GLD switch on request //r. ���������� ���� ������� ������ ��� + trm_cycl = 0; //e. periodic data transmission is not needed //r. ������������� �������� ������ �� ��������� Mk_Ask1(); } // M_Pulse -void B_Rate(void) //e. === procedure of device operation in a mode of continuous output of raw data //r. === ïðîöåäóðà ðàáîòû ïðèáîðà â ðåæèìå íåïðåðûâíîé âûäà÷è "ñûðûõ" äàííûõ +void B_Rate(void) //e. === procedure of device operation in a mode of continuous output of raw data //r. === ��������� ������ ������� � ������ ����������� ������ "�����" ������ { } // B_Rate -void B_Delta(void) //e. === procedure not used //r. === ïðîöåäóðà íå èñïîëüçóåòñÿ +void B_Delta(void) //e. === procedure not used //r. === ��������� �� ������������ { } // B_Delta -void D_Period_W(void) //e. === set the period of the angle increase output //r. === óñòàíîâêà ïåðèîäà âûäà÷è ïðèðàùåíèÿ óãëà +void D_Period_W(void) //e. === set the period of the angle increase output //r. === ��������� ������� ������ ���������� ���� { } // D_Period_W // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -void exec_CMD(void) //e. === the final decoding and command execution procedure //r. === ïðîöåäóðà îêîí÷àòåëüíîé äåøèôðàöèè è èñïîëíåíèÿ êîìàíäû +void exec_CMD(void) //e. === the final decoding and command execution procedure //r. === ��������� ������������� ���������� � ���������� ������� { uint32_t wcode; - rx_buf_copy = 1; //e. initialization of the flag of copying of receiving buffer //r. ïðåäóñòàíîâ ôëàãà êîïèðîâàíèÿ ïðèåìíîãî áóôåðà + rx_buf_copy = 1; //e. initialization of the flag of copying of receiving buffer //r. ����������� ����� ����������� ��������� ������ wcode = (rcv_buf[2] & 0xFF) << 8; - CMD_Code = wcode | (rcv_buf[3] & 0xFF); //e. save it in the memory for echo-transmission //r. ñîõðàíèòü åãî â ïàìÿòè äëÿ îáðàòíîé ïåðåäà÷è + CMD_Code = wcode | (rcv_buf[3] & 0xFF); //e. save it in the memory for echo-transmission //r. ��������� ��� � ������ ��� �������� �������� - if (wcode == CMD_RATE) //e. is it Rate command? //r. ýòî êîìàíäà Rate? + if (wcode == CMD_RATE) //e. is it Rate command? //r. ��� ������� Rate? { B_Rate(); return; } - else if (wcode == CMD_DEV_MODE) //e. is it the Device_Mode command? //r. ýòî êîìàíäà óñòàíîâêè ðåæèìà ïðèáîðà? + else if (wcode == CMD_DEV_MODE) //e. is it the Device_Mode command? //r. ��� ������� ��������� ������ �������? { CMD_Mode = 3; B_Dev_Mode(); return; } - else if (wcode == CMD_DELTA_BINS) //e. is it the B_DeltaBINS command (command of request for data transfer to the navigation system)? //r. ýòî êîìàíäà çàïðîñà ïåðåäà÷è äàííûõ â íàâèã.ñèñòåìó? + else if (wcode == CMD_DELTA_BINS) //e. is it the B_DeltaBINS command (command of request for data transfer to the navigation system)? //r. ��� ������� ������� �������� ������ � �����.�������? { - RgConB = RATE_VIBRO_1; //e. set in the additional register of device control the mode of work with dither counters and the filter of moving average //r. óñòàíàâëèâàåì â äîïîëíèòåëüíîì ðåãèñòðå óïðàâëåíèÿ ðåæèì ðàáîòû ñ âèáðîñ÷åò÷èêàìè è ôèëüòðîì ñêîëüçÿùåãî ñðåäíåãî + RgConB = RATE_VIBRO_1; //e. set in the additional register of device control the mode of work with dither counters and the filter of moving average //r. ������������� � �������������� �������� ���������� ����� ������ � ��������������� � �������� ����������� �������� SetSpeedPeriod(); UART_SwitchSpeed(trm_rate); CMD_Mode = 4; B_Delta_BINS(); return; } - else if (wcode == CMD_DELTA_PS) //e. is it the B_DeltaPS command (command of request for data transfer to the uPC)? //r. ýòî êîìàíäà çàïðîñà ïåðåäà÷è äàííûõ â MkPC? + else if (wcode == CMD_DELTA_PS) //e. is it the B_DeltaPS command (command of request for data transfer to the uPC)? //r. ��� ������� ������� �������� ������ � MkPC? { - SetSpeedPeriod(); //e. and set the answer transfer rate and its periodicity //r. è óñòàíîâèòü ñêîðîñòü ïåðåäà÷è îòâåòà è åãî ïåðèîäè÷íîñòü (_trm_cycl) + SetSpeedPeriod(); //e. and set the answer transfer rate and its periodicity //r. � ���������� �������� �������� ������ � ��� ������������� (_trm_cycl) UART_SwitchSpeed(trm_rate); if (Device_Mode < 4) //e. work with internal latch Device_Mode = DM_INT_LATCH_DELTA_PS; @@ -654,37 +654,37 @@ } else if (wcode == CMD_DELTA_SF) // is it the B_DeltaSF command? { - SetSpeedPeriod(); //e. and set the answer transfer rate and its periodicity //r. è óñòàíîâèòü ñêîðîñòü ïåðåäà÷è îòâåòà è åãî ïåðèîäè÷íîñòü (_trm_cycl) + SetSpeedPeriod(); //e. and set the answer transfer rate and its periodicity //r. � ���������� �������� �������� ������ � ��� ������������� (_trm_cycl) CMD_Mode = 7; - if ((rcv_buf[3] & 0x0001) != 0) //e.reset of accumulated number is disabled //r. ñáðîñ íàêîïëåííîãî ìåæäó çàùåëêàìè ÷èñëà çàïðåùåí + if ((rcv_buf[3] & 0x0001) != 0) //e.reset of accumulated number is disabled //r. ����� ������������ ����� ��������� ����� �������� Ext_Latch_ResetEnable = 0; else Ext_Latch_ResetEnable = 1; B_Delta_SF(); return; } - else if (wcode == CMD_BIT_MODE) //e. is this the BIT mode command? //r. ýòî êîìàíäà òåñòèðîâàíèÿ? + else if (wcode == CMD_BIT_MODE) //e. is this the BIT mode command? //r. ��� ������� ������������? { - CMD_Mode = 6; //e. set the value of the Delta mode//r. óñòàíîâèòü çíà÷åíèå ðåæèìà Delta + CMD_Mode = 6; //e. set the value of the Delta mode//r. ���������� �������� ������ Delta B_BIT_Mode(); return; } - else if (wcode == CMD_DELTA) //e. is this the B_Delta command? //r. ýòî êîìàíäà B_Delta? + else if (wcode == CMD_DELTA) //e. is this the B_Delta command? //r. ��� ������� B_Delta? { - CMD_Mode = 2; //e. set the value of the Delta mode//r. óñòàíîâèòü çíà÷åíèå ðåæèìà Delta - B_Delta(); //e. output calculated value of angle increase //r. âûâîäèòü âû÷èñëåííîå çíà÷åíèå ïðèðàùåíèÿ óãëà + CMD_Mode = 2; //e. set the value of the Delta mode//r. ���������� �������� ������ Delta + B_Delta(); //e. output calculated value of angle increase //r. �������� ����������� �������� ���������� ���� return; } - else if (CMD_Code == CMD_MAINT) //e. is this the Maintenance mode command? //r. ýòî êîìàíäà Maintenance mode? + else if (CMD_Code == CMD_MAINT) //e. is this the Maintenance mode command? //r. ��� ������� Maintenance mode? { if (!RgConB) { RgConB = RATE_VIBRO_1; SwitchRefMeandInt(RATE_VIBRO_1); //e. disable interrupt from referense meander } - CMD_Mode = 5; //e. yes, switch on present mode //r. äà, âêëþ÷èòü äàííûé ðåæèì - M_Status(); //e. output the status stack of registers //r. âûâåñòè ñòàòóñíûé íàáîð ðåãèñòðîâ - if (Device_Mode != DM_INT_10KHZ_LATCH) //e. mode of internal latch 10 kHz //r. ðåæèì âíóòðåííåé çàùåëêè 10 êÃö + CMD_Mode = 5; //e. yes, switch on present mode //r. ��, �������� ������ ����� + M_Status(); //e. output the status stack of registers //r. ������� ��������� ����� ��������� + if (Device_Mode != DM_INT_10KHZ_LATCH) //e. mode of internal latch 10 kHz //r. ����� ���������� ������� 10 ��� { Device_Mode = DM_INT_10KHZ_LATCH; trm_ena = 0; @@ -693,7 +693,7 @@ UART_SwitchSpeed(trm_rate); return; } - else if (wcode == SUBCMD_M_RESET) //e. is this subcommand for modification of the device control register? //r. ýòî ïîäêîìàíäà ìîäèôèêàöèè ðåãèñòðà óïðàâëåíèÿ ó-âà? + else if (wcode == SUBCMD_M_RESET) //e. is this subcommand for modification of the device control register? //r. ��� ���������� ����������� �������� ���������� �-��? { // Mk_AskDev(); M_Reset(); @@ -701,11 +701,11 @@ } else // subcommand analyse { - if (CMD_Mode == 2) //e. is this the 2(Delta) mode? //r. ýòî ðåæèì 2? (Delta) + if (CMD_Mode == 2) //e. is this the 2(Delta) mode? //r. ��� ����� 2? (Delta) { - if (CMD_Code == CMD_D_PERIOD_W) //e. the Delta mode, check the subcommand ... //r. ðåæèì DElta, ïðîâåðèòü ïîäêîìàíäó çàãðóçêè ïåðèîäà + if (CMD_Code == CMD_D_PERIOD_W) //e. the Delta mode, check the subcommand ... //r. ����� DElta, ��������� ���������� �������� ������� { - D_Period_W(); //e. otherwise - set the data transfer period //r. èíà÷å óñòàíîâèòèü ïåðèîä âûäà÷è äàííûõ + D_Period_W(); //e. otherwise - set the data transfer period //r. ����� ����������� ������ ������ ������ return; } else @@ -714,122 +714,122 @@ return; } } - else if (CMD_Mode == 5) //e. check the 5 mode (Maintenance) //r. ïðîâåðêà ðåæèìà 5 (Maintenance) + else if (CMD_Mode == 5) //e. check the 5 mode (Maintenance) //r. �������� ������ 5 (Maintenance) { - if (CMD_Code == SUBCMD_M_CLEAR) //e. is this subcommand of cleaning of the error register? //r. ýòî ïîäêîìàíäà î÷èñòêè ðåãèñòðà îøèáîê ëèíèè? + if (CMD_Code == SUBCMD_M_CLEAR) //e. is this subcommand of cleaning of the error register? //r. ��� ���������� ������� �������� ������ �����? { - M_Clear(); //e. yes, cleaning the error register //r. äà, î÷èñòêà ðåãèñòðà îøèáîê - M_Status(); //e. preparing for trabsfer of the device status //r. ïîäãîòîâêà ïåðåäà÷è ñòàòóñà óñòðîéñòâà + M_Clear(); //e. yes, cleaning the error register //r. ��, ������� �������� ������ + M_Status(); //e. preparing for trabsfer of the device status //r. ���������� �������� ������� ���������� UART_SwitchSpeed(trm_rate); return; } - else if (CMD_Code == SUBCMD_M_MIRR) //e. is this subcommand of return of previous command? //r. ýòî ïîäêîìàíäà âîçâðàòà ïðåäûäóùåé êîìàíäû? + else if (CMD_Code == SUBCMD_M_MIRR) //e. is this subcommand of return of previous command? //r. ��� ���������� �������� ���������� �������? { - rx_buf_copy = 0; //e. yes, forbid copying of command on saving previous //r. äà, çàïðåòèòü êîïèðîâàíèå êîìàíäû äëÿ ñîõðàíåíèÿ ïðåäûäóùåé - M_Mirror(); //e. prepare transfer of the receiving buffer copy //r. ïîäãîòîâèòü ïåðåäà÷ó êîïèè ïðèåìíîãî áóôåðà + rx_buf_copy = 0; //e. yes, forbid copying of command on saving previous //r. ��, ��������� ����������� ������� ��� ���������� ���������� + M_Mirror(); //e. prepare transfer of the receiving buffer copy //r. ����������� �������� ����� ��������� ������ return; } - /* else if (wcode == SUBCMD_M_TMP_W) //e. is this subcommand for writing instructions to the AD7714? //r. ýòî ïîäêîìàíäà çàïèñè èíñòðóêöèé â AD7714? + /* else if (wcode == SUBCMD_M_TMP_W) //e. is this subcommand for writing instructions to the AD7714? //r. ��� ���������� ������ ���������� � AD7714? { - // M_Tmp_W(); //e. yes, procedure call of write of the command //r. äà, âûçîâ ïðîöåäóðû çàïèñè êîìàíäû + // M_Tmp_W(); //e. yes, procedure call of write of the command //r. ��, ����� ��������� ������ ������� return; } */ - else if (wcode == SUBCMD_M_TMP_R) //e. is this subcommand for data read from the AD7714? //r. ýòî ïîäêîìàíäà ÷òåíèÿ äàííûõ èç AD7714? + else if (wcode == SUBCMD_M_TMP_R) //e. is this subcommand for data read from the AD7714? //r. ��� ���������� ������ ������ �� AD7714? { - M_Tmp_R(); //r. yes, call the procedure for data read //e. äà, âûçîâ ïðîöåäóðû ÷òåíèÿ äàííûõ + M_Tmp_R(); //r. yes, call the procedure for data read //e. ��, ����� ��������� ������ ������ return; } - /* else if (wcode == SUBCMD_M_E5R_W) //e. is this subcommand for write to the mode register? //r. ýòî ïîäêîìàíäà çàïèñè â ðåãèñòð ðåæèìà? + /* else if (wcode == SUBCMD_M_E5R_W) //e. is this subcommand for write to the mode register? //r. ��� ���������� ������ � ������� ������? { - M_e5r_W(); //e. yes, write data to the mode register of the Elio5 card //r. äà, çàïèñàòü äàííûå â ðåãèñòð ðåæèìà ïëàòû Elio5 + M_e5r_W(); //e. yes, write data to the mode register of the Elio5 card //r. ��, �������� ������ � ������� ������ ����� Elio5 return; } - else if (wcode == SUBCMD_M_E5RA_W) //e. is this subcommand for write to the mode register? //r. ýòî ïîäêîìàíäà çàïèñè â ðåãèñòð ðåæèìà? + else if (wcode == SUBCMD_M_E5RA_W) //e. is this subcommand for write to the mode register? //r. ��� ���������� ������ � ������� ������? { - M_e5rA_W(); //e. yes, write data to the mode register of the Elio5 card //r. äà, çàïèñàòü äàííûå â ðåãèñòð ðåæèìà ïëàòû Elio5 + M_e5rA_W(); //e. yes, write data to the mode register of the Elio5 card //r. ��, �������� ������ � ������� ������ ����� Elio5 return; } */ - else if (wcode == SUBCMD_M_ADC_R) //e. is t the subcommand for data read from ADCs ADS1250 and ADS8321 ? //r. ýòî ïîäêîìàíäà ÷òåíèÿ äàííûõ èç ÀÖÏ ADS1250 è ADS8321? + else if (wcode == SUBCMD_M_ADC_R) //e. is t the subcommand for data read from ADCs ADS1250 and ADS8321 ? //r. ��� ���������� ������ ������ �� ��� ADS1250 � ADS8321? { - M_ADC_R(); //e. read of ADC channels //r. ÷òåíèå êàíàëîâ ÀÖÏ + M_ADC_R(); //e. read of ADC channels //r. ������ ������� ��� return; } - else if (wcode == SUBCMD_M_CNT_R) //e. is this subcommand of data read from pulse counters? //r. ýòî ïîäêîìàíäà ÷òåíèÿ äàííûõ èç ñ÷åò÷èêîâ èìïóëüñîâ? + else if (wcode == SUBCMD_M_CNT_R) //e. is this subcommand of data read from pulse counters? //r. ��� ���������� ������ ������ �� ��������� ���������? { - M_Cnt_R(); //e. read of counters //r. ÷òåíèå ñ÷åò÷èêîâ + M_Cnt_R(); //e. read of counters //r. ������ ��������� return; } - else if (wcode == SUBCMD_M_FLG_R) //e. is it the command of data read about input flags? //r. ýòî ïîäêîìàíäà ÷òåíèÿ äàííûõ î âõîäíûõ ôëàãàõ? + else if (wcode == SUBCMD_M_FLG_R) //e. is it the command of data read about input flags? //r. ��� ���������� ������ ������ � ������� ������? { - M_Flg_R(); //e. read the input flags //r. ÷èòàòü âõîäíûå ôëàãè + M_Flg_R(); //e. read the input flags //r. ������ ������� ����� return; } - else if (wcode == SUBCMD_M_VIB_W) //e. is this subcommand for load the dither drive period? //r. ýòî ïîäêîìàíäà çàãðóçêè ïåðèîäà âèáðîïðèâîäà? + else if (wcode == SUBCMD_M_VIB_W) //e. is this subcommand for load the dither drive period? //r. ��� ���������� �������� ������� ������������? { - M_Vib_W(); //e. set the new value of the period //r. óñòàíîâèòü íîâîå çíà÷åíèå ïåðèîäà + M_Vib_W(); //e. set the new value of the period //r. ���������� ����� �������� ������� return; } - else if (wcode == SUBCMD_M_GPH_W) //e. is this subcommand for set the gain factor of photodetector channels? //r. ýòî ïîäêîìàíäà óñòàíîâêè óñèëåíèÿ êàíàëîâ ôîòîïðèåìíèêà ? + else if (wcode == SUBCMD_M_GPH_W) //e. is this subcommand for set the gain factor of photodetector channels? //r. ��� ���������� ��������� �������� ������� ������������� ? { - M_Gph_W(); //e. set the new values of gain factor //r. óñòàíîâèòü íîâûå çíà÷åíèÿ óñèëåíèÿ + M_Gph_W(); //e. set the new values of gain factor //r. ���������� ����� �������� �������� return; } - else if (wcode == SUBCMD_M_STIMUL) //e. is this subcommand for set the values of the DACs and flags? //r. ýòî ïîäêîìàíäà óñòàíîâêè çíà÷åíèÿ ÖÀÏîâ è ôäàãîâ ? + else if (wcode == SUBCMD_M_STIMUL) //e. is this subcommand for set the values of the DACs and flags? //r. ��� ���������� ��������� �������� ����� � ������ ? { - M_Stimul(); //e. set the new values //r. óñòàíîâèòü íîâûå çíà÷åíèÿ + M_Stimul(); //e. set the new values //r. ���������� ����� �������� return; } - else if (wcode == SUBCMD_M_RATE) //e. is this subcommand for set the M_Rate output stack //r. ýòî ïîäêîìàíäà óñòàíîâêè âûäà÷è íàáîðà M_Rate ? + else if (wcode == SUBCMD_M_RATE) //e. is this subcommand for set the M_Rate output stack //r. ��� ���������� ��������� ������ ������ M_Rate ? { - M_Rate(); //e. switch on the M_Rate data transfer //r. âêëþ÷èòü ïåðåäà÷ó äàííûõ M_Rate + M_Rate(); //e. switch on the M_Rate data transfer //r. �������� �������� ������ M_Rate return; } - else if (wcode == SUBCMD_M_PARAM_W) //e. is this subcommand for write the new value of the GLD parameter ... //r. ýòî ïîäêîìàíäà çàïèñè íîâîãî çíà÷åíèÿ ïàðàìåòðà GLD + else if (wcode == SUBCMD_M_PARAM_W) //e. is this subcommand for write the new value of the GLD parameter ... //r. ��� ���������� ������ ������ �������� ��������� GLD { - M_Param_W(); //e. write the new value of the parameter //r. çàïèñàòü íîâîå çíà÷åíèå ïàðàìåòðà + M_Param_W(); //e. write the new value of the parameter //r. �������� ����� �������� ��������� return; } - else if (wcode == SUBCMD_M_PARAM_R) //e. is this subcommand for read the value of the GLD parameter? //r. ýòî ïîäêîìàíäà ÷òåíèÿ çíà÷åíèÿ ïàðàìåòðà GLD? + else if (wcode == SUBCMD_M_PARAM_R) //e. is this subcommand for read the value of the GLD parameter? //r. ��� ���������� ������ �������� ��������� GLD? { - M_Param_R(); //e. read the value from the data memory //r. ñ÷èòàòü çíà÷åíèå ïàðàìåòðà èç ïàìÿòè äàíûõ + M_Param_R(); //e. read the value from the data memory //r. ������� �������� ��������� �� ������ ����� return; } - else if (CMD_Code == SUBCMD_M_LDPAR_F) //e. is this subcommand for load GLD parameters ... //r. ýòî ïîäêîìàíäà çàãðóçêè ïàðàìåòðîâ GLD + else if (CMD_Code == SUBCMD_M_LDPAR_F) //e. is this subcommand for load GLD parameters ... //r. ��� ���������� �������� ���������� GLD { - M_LdPar_F(); //e. start the loading of parameters //r. çàïóñòèòü çàãðóçêó ïàðàìåòðîâ + M_LdPar_F(); //e. start the loading of parameters //r. ��������� �������� ���������� return; } - else if (CMD_Code == SUBCMD_M_LDPAR_D) //e. is this subcommand for direct setting of the GLD parameters ... //r. ýòî ïîäêîìàíäà ïðÿìîãî íàçíà÷åíèÿ ïàðàìåòðîâ GLD + else if (CMD_Code == SUBCMD_M_LDPAR_D) //e. is this subcommand for direct setting of the GLD parameters ... //r. ��� ���������� ������� ���������� ���������� GLD { - M_LdPar_D(); //e. read the value of the parameter from the data memory //r. ñ÷èòàòü çíà÷åíèå ïàðàìåòðà èç ïàìÿòè äàíûõ + M_LdPar_D(); //e. read the value of the parameter from the data memory //r. ������� �������� ��������� �� ������ ����� return; } - else if (CMD_Code == SUBCMD_M_START) //e. is this subcommand for GLD starting? //r. ýòî ïîäêîìàíäà çàïóñêà GLD? + else if (CMD_Code == SUBCMD_M_START) //e. is this subcommand for GLD starting? //r. ��� ���������� ������� GLD? { - M_Start(); //e. call the procedure of start //r. çàïóñòèòü ïðîöåäóðó ñòàðòà + M_Start(); //e. call the procedure of start //r. ��������� ��������� ������ return; } - else if (CMD_Code == SUBCMD_M_PULSE) //e. is this subcommand for GLD starting? //r. ýòî ïîäêîìàíäà çàïóñêà GLD? + else if (CMD_Code == SUBCMD_M_PULSE) //e. is this subcommand for GLD starting? //r. ��� ���������� ������� GLD? { - M_Pulse(); //e. call light-up function //r. âûäàòü èìïóëüñ ïîäæèãà + M_Pulse(); //e. call light-up function //r. ������ ������� ������� return; } - else if (CMD_Code == SUBCMD_M_STOP) //e. is this subcommand for GLD switch off? //r. ýòî ïîäêîìàíäà âûêëþ÷åíèÿ GLD? + else if (CMD_Code == SUBCMD_M_STOP) //e. is this subcommand for GLD switch off? //r. ��� ���������� ���������� GLD? { - M_Stop(); //e. otherwise- switch off all regulators and stop device //r. âûêëþ÷èòü âñå êîíòóðû è îñòàíîâèòü ïðèáîð + M_Stop(); //e. otherwise- switch off all regulators and stop device //r. ��������� ��� ������� � ���������� ������ return; } - else if (wcode == SUBCMD_M_CTL_R) //e. is this subcommand for read the device control register? //r. ýòî ïîäêîìàíäà ÷òåíèÿ ðåãèñòðà óïðàâëåíèÿ ó-âà? + else if (wcode == SUBCMD_M_CTL_R) //e. is this subcommand for read the device control register? //r. ��� ���������� ������ �������� ���������� �-��? { M_Ctl_R(); return; } - else if (wcode == SUBCMD_M_CTL_M) //e. is this subcommand for modification of the device control register? //r. ýòî ïîäêîìàíäà ìîäèôèêàöèè ðåãèñòðà óïðàâëåíèÿ ó-âà? + else if (wcode == SUBCMD_M_CTL_M) //e. is this subcommand for modification of the device control register? //r. ��� ���������� ����������� �������� ���������� �-��? { M_Ctl_M(); return; } -/* else if (wcode == SUBCMD_M_RESET) //e. is this subcommand for modification of the device control register? //r. ýòî ïîäêîìàíäà ìîäèôèêàöèè ðåãèñòðà óïðàâëåíèÿ ó-âà? +/* else if (wcode == SUBCMD_M_RESET) //e. is this subcommand for modification of the device control register? //r. ��� ���������� ����������� �������� ���������� �-��? { M_Reset(); return; @@ -847,15 +847,15 @@ { int size; - if (!rcv_Rdy) //e. is data in receive buffer? //r. â ïðèåìíîì áóôåðå åñòü èíôîðìàöèÿ? + if (!rcv_Rdy) //e. is data in receive buffer? //r. � �������� ������ ���� ����������? { - return; //e. if no, stop processing //r. åñëè íåò, çàêîí÷èòü îáðàáîòêó + return; //e. if no, stop processing //r. ���� ���, ��������� ��������� } - if (!line_sts) //e. Whether there were errors of receiving of start-bit? //r. áûëè ëè îøèáêè ïðèåìà ñòàðò-áèòà ? + if (!line_sts) //e. Whether there were errors of receiving of start-bit? //r. ���� �� ������ ������ �����-���� ? { - //e. there were not errors of receiving of bytes, check the device address //r. îøèáîê ïðèåìà áàéòîâ íå áûëî, ïðîâåðèòü àäðåñ îáðàùåíèÿ - //Is_Brodcast_Req = 0; //e. reset the flag of broadcasting request //r. ñáðîñèòü ôëàã øèðîêîâåùàòåëüíîãî çàïðîñà + //e. there were not errors of receiving of bytes, check the device address //r. ������ ������ ������ �� ����, ��������� ����� ��������� + //Is_Brodcast_Req = 0; //e. reset the flag of broadcasting request //r. �������� ���� ������������������ ������� if (rcv_buf[1] != Device_blk.Str.My_Addres) { if (rcv_buf[1] != BROADCAST_ADDRESS) @@ -865,26 +865,26 @@ } if (rcv_buf[0] == COMMAND_PREFIX) - { //e. there is new command in the receiver buffer, stop the transfer //r. â áóôåðå ïðèåìíèêà åñòü íîâàÿ êîìàíäà, ïðåêðàòèòü ïåðåäà÷ó - trm_ena = 0; //e. reset the flag of transmission allowing //r. ñáðîñèòü ôëàã ðàçðåøåíèÿ ïåðåäà÷è + { //e. there is new command in the receiver buffer, stop the transfer //r. � ������ ��������� ���� ����� �������, ���������� �������� + trm_ena = 0; //e. reset the flag of transmission allowing //r. �������� ���� ���������� �������� //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - exec_CMD(); // øåé êîìàíäû + exec_CMD(); // ��� ������� ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - //e. check up presence of errors in operation of this procedure //r. ïðîâåðèòü, íàëè÷èå îøèáîê â ðàáîòå äàííîé ïîöåäóðû - //e. did is the "unknown code of a command" or "parameters were set incorrectly" error? //r. áûëà îøèáêà "íåèçâåñòíûé êîä êîìàíäû" èëè "íåâåðíî çàäàííûå ïàðàìåòðû"? + //e. check up presence of errors in operation of this procedure //r. ���������, ������� ������ � ������ ������ �������� + //e. did is the "unknown code of a command" or "parameters were set incorrectly" error? //r. ���� ������ "����������� ��� �������" ��� "������� �������� ���������"? if ( ((line_sts & CODE_ERR) == CODE_ERR) || ((line_sts & PARAM_ERR) == PARAM_ERR) ) { - line_err = line_sts; //e. set error bits in the error register of the line //r. óñòàíîâèòü áèòû îøèáîê â ðåãèñòðå îøèáîê ëèíèè + line_err = line_sts; //e. set error bits in the error register of the line //r. ���������� ���� ������ � �������� ������ ����� } } else { - line_err = line_sts | NO_CMD_ERR; // äîáàâëåíèå îøèáêè â ðåãèñòð îøèáîê + line_err = line_sts | NO_CMD_ERR; // ���������� ������ � ������� ������ } } @@ -893,24 +893,24 @@ line_err = line_sts; } end: - if (rx_buf_copy) //e. is copying of present received packet needed? //r. òðåáóåòñÿ êîïèðîâàíèå äàííîãî ïðèíÿòîãî ïàêåòà? + if (rx_buf_copy) //e. is copying of present received packet needed? //r. ��������� ����������� ������� ��������� ������? { size = rcv_num_byt; - rcv_byt_copy = rcv_num_byt; //e. save the size of copy //r. çàïîìíèòü ðàçìåð êîïèè - if (rcv_num_byt > sizeof(rcv_buf)) //e. compare the size of receiving buffer with amount of received bytes //r. êîïèðîâàíèå òðåáóåòñÿ, ñðàâíèòü ðàçìåð ïðèåìíîãî áóôåðà ñ ÷èñëîì ïðèíÿòûõ áàéò + rcv_byt_copy = rcv_num_byt; //e. save the size of copy //r. ��������� ������ ����� + if (rcv_num_byt > sizeof(rcv_buf)) //e. compare the size of receiving buffer with amount of received bytes //r. ����������� ���������, �������� ������ ��������� ������ � ������ �������� ���� { size = sizeof(rcv_buf); } - memcpy(rcv_copy, rcv_buf, size); //e. copy of received amount of bytes, but no more than buffer size //r. êîïèðîâàòü ïðèíÿòîå ÷èñëî áàéò, íî íå áîëåå ðàçìåðà áóôåðà + memcpy(rcv_copy, rcv_buf, size); //e. copy of received amount of bytes, but no more than buffer size //r. ���������� �������� ����� ����, �� �� ����� ������� ������ } - rx_buf_copy = 0; //e. reset the flag of necessity of copying of receiving buffer //r. ñáðîñèòü ôëàã íåîáõîäèìîñòè êîïèðîâàíèÿ ïðèåìíîãî áóôåðà + rx_buf_copy = 0; //e. reset the flag of necessity of copying of receiving buffer //r. �������� ���� ������������� ����������� ��������� ������ do rcv_buf[--rcv_num_byt] = 0; while(rcv_num_byt); rcv_num_byt_old = rcv_num_byt; - line_sts = 0; //e. reset the line status register //r. ñáðîñèòü ðåãèñòð ñòàòóñà ëèíèè - rcv_Rdy = 0; //e. allow further data reception //r. ðàçðåøèòü äàëüíåéøèé ïðèåì äàííûõ + line_sts = 0; //e. reset the line status register //r. �������� ������� ������� ����� + rcv_Rdy = 0; //e. allow further data reception //r. ��������� ���������� ����� ������ } // decode_CMD