Dmitry Kovalev
/
LGstaandart
forkd
Fork of LG2 by
Diff: Parameters.c
- Revision:
- 129:406995a91322
- Parent:
- 21:bc8c1cec3da6
diff -r 1e4675a36c93 -r 406995a91322 Parameters.c --- a/Parameters.c Mon Apr 11 11:04:34 2016 +0000 +++ b/Parameters.c Tue Apr 12 11:10:49 2016 +0000 @@ -11,7 +11,7 @@ ******************************************************************************/ void LoadFlashParam(unsigned source) { - if (source == FromFLASH) +/* if (source == FromFLASH) { while (LPC_GPDMACH3->CConfig & (1<<17)); //e. wait while DMA channel3 is busy @@ -34,7 +34,7 @@ else //e. source == ByDefault init_DefaultParam(); //e. load parameters by default - blt_in_test = ((uint32_t)FIRMWARE_VER << 8) | (Device_blk.Str.Device_SerialNumber & 0x00FF); + blt_in_test = ((uint32_t)FIRMWARE_VER << 8) | (Device_blk.Str.Device_SerialNumber & 0x00FF);*/ } /****************************************************************************** ** Function name: init_DefaultParam @@ -47,7 +47,7 @@ ******************************************************************************/ void init_DefaultParam(void) { - int i; + /*int i; Device_blk.Str.My_Addres = My_Addres_const; //r. 0x00; //e. direct set of the main device address //r. прямое назначение основного адреса у-ва @@ -115,7 +115,7 @@ Device_blk.Str.Gain_Ph_B = G_PHOTO_STRB; Device_blk.Str.Device_SerialNumber = DEVICE_SN; //e. serial number of the device is by default written down in the register of self-testing //r. серийный номер прибора по умолчанию записываем в регистр самотестирования - + */ } // init_DefaultParam /****************************************************************************** ** Function name: FlashDMA_Init @@ -127,13 +127,13 @@ ** ******************************************************************************/ void FlashDMA_Init() -{ +{/* LPC_GPDMACH3->CConfig &= ~DMAChannelEn; LPC_GPDMA->IntTCClear = DMA3_IntTCClear; LPC_GPDMA->IntErrClr = DMA3_IntTCClear; - /* Ch3 set for M2M transfer from Flash to RAM. */ + LPC_GPDMACH3->CSrcAddr = 0x40000; //e. address of device parameter block in flash memory (22 sec) LPC_GPDMACH3->CDestAddr = (uint32_t)&(Device_blk.Array);//e. address of device parameter block in RAM @@ -142,5 +142,5 @@ LPC_GPDMACH3->CConfig = MaskTCInt |MaskErrInt|DMA_MEMORY |DMA_MEMORY |(M2M << 11)| DMAChannelEn; - return; + return;*/ }