Diff: host/Source/App/InputOutput.h

Revision:

23:12e6183f04d4

diff -r bc8c1cec3da6 -r 12e6183f04d4 host/Source/App/InputOutput.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/host/Source/App/InputOutput.h	Wed Feb 03 10:44:42 2016 +0300
@@ -0,0 +1,127 @@
+#include "stdint.h"
+
+//******************************I2C*************************************************	
+#define I2C0
+
+#define I2C_IDLE              1
+#define I2C_BUSY              0
+
+#define I2CONSET_I2EN       0x0000040  /* I2C Control Set Register */
+#define I2CONSET_AA         0x0000004
+#define I2CONSET_SI         0x0000008
+#define I2CONSET_STO        0x0000010
+#define I2CONSET_STA        0x0000020
+
+#define I2CONCLR_AAC        0x0000004  /* I2C Control clear Register */
+#define I2CONCLR_SIC        0x0000008
+#define I2CONCLR_STAC       0x0000020
+#define I2CONCLR_I2ENC      0x0000040
+
+#define I2SCLH_SCLH			0x00000080  /* I2C SCL Duty Cycle High Reg */
+#define I2SCLL_SCLL			0x00000080  /* I2C SCL Duty Cycle Low Reg */
+
+#define I2C_WRITELENGTH		0x00000006	/*Buffer length*/
+#define A_ADDRESS			0x0000005E	/*address of slave potentiometer (table 6-2 of pot's manual)*/
+#define B_ADDRESS			0x0000005C	/*address of slave potentiometer (table 6-2 of pot's manual)*/
+#define WRITE_CMD			0x00000000	/*address of wiper0 register in memory map*/
+
+//********************************SPI************************************************
+#define HALFWORDS_FOR_ADCs		3
+
+#define WRITE_DAC0			0x00000030	//write data to DAC 0
+#define WRITE_DAC1			0x00000031	//write data to DAC 1
+
+#define	DAC					(1<<23)		//DAC identifer
+#define ADC					(1<<16)		//ADC identifer
+
+#define SetCS(a)			LPC_GPIO0->FIOSET = a	//set CS signal for ADC or DAC
+#define ResetCS(a)			LPC_GPIO0->FIOCLR = a	//reset CS signal for ADC or DAC
+#define SetDAC(a)			LPC_GPIO0->FIOSET = a	//set CS signal for ADC or DAC
+#define ResetDAC(a)			LPC_GPIO0->FIOCLR = a	//reset CS signal for ADC or DAC
+
+
+
+#define SSPCR1_SSE		 0x00000002
+
+#define TX_SSP_EMPT		 0x00000001
+#define RX_SSP_notEMPT	 0x00000004
+#define TX_SSP_notFULL	 0x00000002
+#define RX_SSP_FULL		 0x00000008
+#define SSP_BUSY		 0x00000010
+
+#define ADC_ERR_MSK		 0x00000001
+#define DAC_ERR_MSK		 0x00000002
+
+#define TIMEOUT		1000
+
+typedef union 
+      {
+		    int ArrayOut[31];
+  struct {  
+  		int	WP_reg;        	//e. PLC output voltage
+			int WP_sin;				  //r. ñèãíàë ïîèñêà ÑÐÏ - ñèíóñ 250 Ãö
+			int	WP_pll;         //r. âûõîä XOR ÔÄ êîíòóðà ÑÐÏ
+		  int HF_reg;			  	//e. HFO output voltage
+			
+			int HF_dif;
+
+			int WP_Phase_Det_Array[8]; //e. arrays for "worms" output //r. ìàññèâû äëÿ âûâîäà "÷åðâÿ÷êîâ"
+			int WP_sin_Array[8];
+			int	WP_scope1, WP_scope2; 	//e. temporary variables for Rate3 monitoring //r. âðåìåííûå ïåðåìåííûå äëÿ íàáëþäåíèÿ â Rate3
+		 
+	   uint32_t F_ras;          //e. really output frequency, divided by 16  (for transmission) 		    
+	   uint32_t L_Vibro;		//e. period of oscillation of the dither drive //r. ïåðèîä êîëåáàíèÿ âèáðîïðèâîäà
+	   uint32_t T_Vibro;		//e. pulse width of the dither drive //r. äëèòåëüíîñòü èìïóëüñà âèáðîïðèâîäà
+	   uint32_t T_VB_pll;       //e. PD output of the frequency regulator of the dither drive  //r. âûõîä ÔÄ ðåãóëÿòîðà ÷àñòîòû âèáðîïðèâîäà
+
+			int PS_dif;
+			int BINS_dif;
+			int Cnt_Dif;
+			int Cnt_Pls;
+			int Cnt_Mns;
+			int Tmp_Out[6];
+
+		__int64 SF_dif;
+		 
+		 } Str;	 
+	   } OUTPUT;
+
+
+typedef union 
+      {
+			int ArrayIn[3];
+  struct {		  							
+			int Tmp_in[2];
+			int HF_out;	
+			int WP_sel;		       	
+		 }StrIn;
+	   } INPUT; 
+
+extern INPUT Input;
+extern OUTPUT Output;
+
+void DAC_ADC_Exchange_Init(void);
+void DAC_ADC_Exchange(void);
+void ADC_Input(void);
+
+void clc_HFO(void);
+
+int  clc_WP_sin(void);
+void clc_PLC(void);
+void init_PLC(void);
+
+void clc_Pulses(void);
+void SOI_Init(void);
+
+void VibroDither_SwitchOn(void);
+void VibroDither_SwitchOff(void);
+void VibroDither_Set(void);
+void DACInit(void);
+void DAC_Output(int);
+void  clc_ThermoSensors(void);
+
+void Out_G_photo(unsigned, unsigned);
+void G_Photo_Init( void );
+void G_Photo_Exchange(void);
+
+//endof file