Dmitry Kovalev
/
LGstaandart
forkd
Fork of LG2 by
Diff: IAP.h
- Revision:
- 132:2c7bec5cf6fe
- Parent:
- 130:1421dda4d7e7
- Child:
- 136:19b9e6abb86f
--- a/IAP.h Tue Apr 12 14:16:03 2016 +0000 +++ b/IAP.h Wed Apr 13 15:01:16 2016 +0000 @@ -1,495 +1,61 @@ -/** IAP : internal Flash memory access library - * - * The internal Flash memory access is described in the LPC1768 and LPC11U24 usermanual. - * http://www.nxp.com/documents/user_manual/UM10360.pdf - * http://www.nxp.com/documents/user_manual/UM10462.pdf +/***************************************************************************** + * $Id$ * - * LPC1768 -- - * Chapter 2: "LPC17xx Memory map" - * Chapter 32: "LPC17xx Flash memory interface and programming" - * refering Rev. 01 - 4 January 2010 - * - * LPC11U24 -- - * Chapter 2: "LPC11Uxx Memory mapping" - * Chapter 20: "LPC11Uxx Flash programming firmware" - * refering Rev. 03 - 16 July 2012 - * - * Released under the MIT License: http://mbed.org/license/mit + * Project: NXP LPC1100 Secondary Bootloader Example * - * revision 1.0 09-Mar-2010 1st release - * revision 1.1 12-Mar-2010 chaged: to make possible to reserve flash area for user - * it can be set by USER_FLASH_AREA_START and USER_FLASH_AREA_SIZE in IAP.h - * revision 2.0 26-Nov-2012 LPC11U24 code added - * revision 2.1 26-Nov-2012 EEPROM access code imported from Suga koubou san's (http://mbed.org/users/okini3939/) library - * http://mbed.org/users/okini3939/code/M0_EEPROM_test/ - * revision 3.0 09-Jan-2015 LPC812 and LPC824 support added - * revision 3.1 13-Jan-2015 LPC1114 support added - * revision 3.1.1 16-Jan-2015 Target MCU name changed for better compatibility across the platforms - */ - - -#ifndef MBED_IAP -#define MBED_IAP - -#include "mbed.h" - -#if defined(TARGET_LPC176X) - -#define USER_FLASH_AREA_START FLASH_SECTOR_29 -#define USER_FLASH_AREA_SIZE (FLASH_SECTOR_SIZE_16_TO_29 * 1) - -/* - * memory map information is available in next URL also. - * http://mbed.org/projects/libraries/svn/mbed/trunk/LPC1768/LPC17xx.h - */ - -/** Table for start adress of sectors + * Description: Provides access to In-Application Programming (IAP) routines + * contained within the bootROM sector of LPC1100 devices. * - * LPC1768 internal flash memory sector numbers and addresses - * - * LPC1768 flash memory are and sector number/size - * Table 568 "Sectors in a LPC17xx device", Section 5. "Sector numbers", usermanual - * - * 0x00000000 - 0x0007FFFF flash (29 sectors) + * Copyright(C) 2010, NXP Semiconductor + * All rights reserved. * - * Sector0: 0x00000000 - 0x00000FFF 4K - * Sector1: 0x00001000 - 0x00001FFF 4K - * Sector2: 0x00002000 - 0x00002FFF 4K - * Sector3: 0x00003000 - 0x00003FFF 4K - * Sector4: 0x00004000 - 0x00004FFF 4K - * Sector5: 0x00005000 - 0x00005FFF 4K - * Sector6: 0x00006000 - 0x00006FFF 4K - * Sector7: 0x00007000 - 0x00007FFF 4K - * Sector8: 0x00008000 - 0x00008FFF 4K - * Sector9: 0x00009000 - 0x00009FFF 4K - * Sector10: 0x0000A000 - 0x0000AFFF 4K - * Sector11: 0x0000B000 - 0x0000BFFF 4K - * Sector12: 0x0000C000 - 0x0000CFFF 4K - * Sector13: 0x0000D000 - 0x0000DFFF 4K - * Sector14: 0x0000E000 - 0x0000EFFF 4K - * Sector15: 0x0000F000 - 0x0000FFFF 4K - * - * Sector16: 0x00010000 - 0x00017FFF 32K - * Sector17: 0x00018000 - 0x0001FFFF 32K - * Sector18: 0x00020000 - 0x00027FFF 32K - * Sector19: 0x00028000 - 0x0002FFFF 32K - * Sector20: 0x00030000 - 0x00037FFF 32K - * Sector21: 0x00038000 - 0x0003FFFF 32K - * Sector22: 0x00040000 - 0x00047FFF 32K - * Sector23: 0x00048000 - 0x0004FFFF 32K - * Sector24: 0x00050000 - 0x00057FFF 32K - * Sector25: 0x00058000 - 0x0005FFFF 32K - * Sector26: 0x00060000 - 0x00067FFF 32K - * Sector27: 0x00068000 - 0x0006FFFF 32K - * Sector28: 0x00070000 - 0x00077FFF 32K - * Sector29: 0x00078000 - 0x0007FFFF 32K - */ - -#define FLASH_SECTOR_0 0x00000000 -#define FLASH_SECTOR_1 0x00001000 -#define FLASH_SECTOR_2 0x00002000 -#define FLASH_SECTOR_3 0x00003000 -#define FLASH_SECTOR_4 0x00004000 -#define FLASH_SECTOR_5 0x00005000 -#define FLASH_SECTOR_6 0x00006000 -#define FLASH_SECTOR_7 0x00007000 -#define FLASH_SECTOR_8 0x00008000 -#define FLASH_SECTOR_9 0x00009000 -#define FLASH_SECTOR_10 0x0000A000 -#define FLASH_SECTOR_11 0x0000B000 -#define FLASH_SECTOR_12 0x0000C000 -#define FLASH_SECTOR_13 0x0000D000 -#define FLASH_SECTOR_14 0x0000E000 -#define FLASH_SECTOR_15 0x0000F000 -#define FLASH_SECTOR_16 0x00010000 -#define FLASH_SECTOR_17 0x00018000 -#define FLASH_SECTOR_18 0x00020000 -#define FLASH_SECTOR_19 0x00028000 -#define FLASH_SECTOR_20 0x00030000 -#define FLASH_SECTOR_21 0x00038000 -#define FLASH_SECTOR_22 0x00040000 -#define FLASH_SECTOR_23 0x00048000 -#define FLASH_SECTOR_24 0x00050000 -#define FLASH_SECTOR_25 0x00058000 -#define FLASH_SECTOR_26 0x00060000 -#define FLASH_SECTOR_27 0x00068000 -#define FLASH_SECTOR_28 0x00070000 -#define FLASH_SECTOR_29 0x00078000 -#define FLASH_SECTOR_SIZE_0_TO_15 ( 4 * 1024) -#define FLASH_SECTOR_SIZE_16_TO_29 (32 * 1024) + ***************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * NXP Semiconductors assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. NXP Semiconductors + * reserves the right to make changes in the software without + * notification. NXP Semiconductors also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. + *****************************************************************************/ +#ifndef __IAP_H +#define __IAP_H -static char * sector_start_adress[] = { - (char *)FLASH_SECTOR_0, - (char *)FLASH_SECTOR_1, - (char *)FLASH_SECTOR_2, - (char *)FLASH_SECTOR_3, - (char *)FLASH_SECTOR_4, - (char *)FLASH_SECTOR_5, - (char *)FLASH_SECTOR_6, - (char *)FLASH_SECTOR_7, - (char *)FLASH_SECTOR_8, - (char *)FLASH_SECTOR_9, - (char *)FLASH_SECTOR_10, - (char *)FLASH_SECTOR_11, - (char *)FLASH_SECTOR_12, - (char *)FLASH_SECTOR_13, - (char *)FLASH_SECTOR_14, - (char *)FLASH_SECTOR_15, - (char *)FLASH_SECTOR_16, - (char *)FLASH_SECTOR_17, - (char *)FLASH_SECTOR_18, - (char *)FLASH_SECTOR_19, - (char *)FLASH_SECTOR_20, - (char *)FLASH_SECTOR_21, - (char *)FLASH_SECTOR_22, - (char *)FLASH_SECTOR_23, - (char *)FLASH_SECTOR_24, - (char *)FLASH_SECTOR_25, - (char *)FLASH_SECTOR_26, - (char *)FLASH_SECTOR_27, - (char *)FLASH_SECTOR_28, - (char *)FLASH_SECTOR_29 -}; - -#elif defined(TARGET_LPC11UXX) || defined(TARGET_LPC11XX) - -#define USER_FLASH_AREA_START FLASH_SECTOR_7 -#define USER_FLASH_AREA_SIZE (FLASH_SECTOR_SIZE * 1) - -/** Table for start adress of sectors - * - * LPC11U24 internal flash memory sector numbers and addresses - * - * LPC11U24 flash memory are and sector number/size - * Table 334 "LPC11U1x/2x flash sectors", Section 20. "Sector numbers", usermanual - * - * 0x00000000 - 0x00007FFF flash (8 sectors) - * - * Sector0: 0x00000000 - 0x00000FFF 4K - * Sector1: 0x00001000 - 0x00001FFF 4K - * Sector2: 0x00002000 - 0x00002FFF 4K - * Sector3: 0x00003000 - 0x00003FFF 4K - * Sector4: 0x00004000 - 0x00004FFF 4K - * Sector5: 0x00005000 - 0x00005FFF 4K - * Sector6: 0x00006000 - 0x00006FFF 4K - * Sector7: 0x00007000 - 0x00007FFF 4K - */ - -#define FLASH_SECTOR_0 0x00000000 -#define FLASH_SECTOR_1 0x00001000 -#define FLASH_SECTOR_2 0x00002000 -#define FLASH_SECTOR_3 0x00003000 -#define FLASH_SECTOR_4 0x00004000 -#define FLASH_SECTOR_5 0x00005000 -#define FLASH_SECTOR_6 0x00006000 -#define FLASH_SECTOR_7 0x00007000 -#define FLASH_SECTOR_SIZE (4 * 1024) - -static char * sector_start_adress[] = { - (char *)FLASH_SECTOR_0, - (char *)FLASH_SECTOR_1, - (char *)FLASH_SECTOR_2, - (char *)FLASH_SECTOR_3, - (char *)FLASH_SECTOR_4, - (char *)FLASH_SECTOR_5, - (char *)FLASH_SECTOR_6, - (char *)FLASH_SECTOR_7, -}; - -#elif defined(TARGET_LPC81X) || defined(TARGET_LPC82X) - -#define USER_FLASH_AREA_START FLASH_SECTOR_15 -#define USER_FLASH_AREA_SIZE (FLASH_SECTOR_SIZE * 1) - -/** Table for start adress of sectors - * - * LPC812/LPC824 internal flash memory sector numbers and addresses - * - * 0x00000000 - 0x00003FFF flash (16 sectors for LPC812) - * 0x00000000 - 0x00007FFF flash (32 sectors for LPC824) - * - * Sector0: 0x00000000 - 0x000003FF 1K - * Sector1: 0x00000400 - 0x000007FF 1K - * Sector2: 0x00000800 - 0x00000BFF 1K - * Sector3: 0x00000C00 - 0x00000FFF 1K - * Sector4: 0x00001000 - 0x000013FF 1K - * Sector5: 0x00001400 - 0x000017FF 1K - * Sector6: 0x00001800 - 0x00001BFF 1K - * Sector7: 0x00001C00 - 0x00001FFF 1K - * Sector8: 0x00002000 - 0x000023FF 1K - * Sector9: 0x00002400 - 0x000027FF 1K - * Sector10: 0x00002800 - 0x00002BFF 1K - * Sector11: 0x00002C00 - 0x00002FFF 1K - * Sector12: 0x00003000 - 0x000033FF 1K - * Sector13: 0x00003400 - 0x000037FF 1K - * Sector14: 0x00003800 - 0x00003BFF 1K - * Sector15: 0x00003C00 - 0x00003FFF 1K - * Sector16: 0x00004000 - 0x000043FF 1K (LPC824 only) - * Sector17: 0x00004400 - 0x000047FF 1K (LPC824 only) - * Sector18: 0x00004800 - 0x00004BFF 1K (LPC824 only) - * Sector19: 0x00004C00 - 0x00004FFF 1K (LPC824 only) - * Sector20: 0x00005000 - 0x000053FF 1K (LPC824 only) - * Sector21: 0x00005400 - 0x000057FF 1K (LPC824 only) - * Sector22: 0x00005800 - 0x00005BFF 1K (LPC824 only) - * Sector23: 0x00005C00 - 0x00005FFF 1K (LPC824 only) - * Sector24: 0x00006000 - 0x000063FF 1K (LPC824 only) - * Sector25: 0x00006400 - 0x000067FF 1K (LPC824 only) - * Sector26: 0x00006800 - 0x00006BFF 1K (LPC824 only) - * Sector27: 0x00006C00 - 0x00006FFF 1K (LPC824 only) - * Sector28: 0x00007000 - 0x000073FF 1K (LPC824 only) - * Sector29: 0x00007400 - 0x000077FF 1K (LPC824 only) - * Sector30: 0x00007800 - 0x00007BFF 1K (LPC824 only) - * Sector31: 0x00007C00 - 0x00007FFF 1K (LPC824 only) - */ +#include <stdint.h> -#define FLASH_SECTOR_0 0x00000000 -#define FLASH_SECTOR_1 0x00000400 -#define FLASH_SECTOR_2 0x00000800 -#define FLASH_SECTOR_3 0x00000C00 -#define FLASH_SECTOR_4 0x00001000 -#define FLASH_SECTOR_5 0x00001400 -#define FLASH_SECTOR_6 0x00001800 -#define FLASH_SECTOR_7 0x00001C00 -#define FLASH_SECTOR_8 0x00002000 -#define FLASH_SECTOR_9 0x00002400 -#define FLASH_SECTOR_10 0x00002800 -#define FLASH_SECTOR_11 0x00002C00 -#define FLASH_SECTOR_12 0x00003000 -#define FLASH_SECTOR_13 0x00003400 -#define FLASH_SECTOR_14 0x00003800 -#define FLASH_SECTOR_15 0x00003C00 -#define FLASH_SECTOR_16 0x00004000 // for LPC824 only -#define FLASH_SECTOR_17 0x00004400 // for LPC824 only -#define FLASH_SECTOR_18 0x00004800 // for LPC824 only -#define FLASH_SECTOR_19 0x00004C00 // for LPC824 only -#define FLASH_SECTOR_20 0x00005000 // for LPC824 only -#define FLASH_SECTOR_21 0x00005400 // for LPC824 only -#define FLASH_SECTOR_22 0x00005800 // for LPC824 only -#define FLASH_SECTOR_23 0x00005C00 // for LPC824 only -#define FLASH_SECTOR_24 0x00006000 // for LPC824 only -#define FLASH_SECTOR_25 0x00006400 // for LPC824 only -#define FLASH_SECTOR_26 0x00006800 // for LPC824 only -#define FLASH_SECTOR_27 0x00006C00 // for LPC824 only -#define FLASH_SECTOR_28 0x00007000 // for LPC824 only -#define FLASH_SECTOR_29 0x00007400 // for LPC824 only -#define FLASH_SECTOR_30 0x00007800 // for LPC824 only -#define FLASH_SECTOR_31 0x00007C00 // for LPC824 only -#define FLASH_SECTOR_SIZE (1 * 1024) - -static char * sector_start_adress[] = { - (char *)FLASH_SECTOR_0, - (char *)FLASH_SECTOR_1, - (char *)FLASH_SECTOR_2, - (char *)FLASH_SECTOR_3, - (char *)FLASH_SECTOR_4, - (char *)FLASH_SECTOR_5, - (char *)FLASH_SECTOR_6, - (char *)FLASH_SECTOR_7, - (char *)FLASH_SECTOR_8, - (char *)FLASH_SECTOR_9, - (char *)FLASH_SECTOR_10, - (char *)FLASH_SECTOR_11, - (char *)FLASH_SECTOR_12, - (char *)FLASH_SECTOR_13, - (char *)FLASH_SECTOR_14, - (char *)FLASH_SECTOR_15, - (char *)FLASH_SECTOR_16, // for LPC824 only - (char *)FLASH_SECTOR_17, // for LPC824 only - (char *)FLASH_SECTOR_18, // for LPC824 only - (char *)FLASH_SECTOR_19, // for LPC824 only - (char *)FLASH_SECTOR_20, // for LPC824 only - (char *)FLASH_SECTOR_21, // for LPC824 only - (char *)FLASH_SECTOR_22, // for LPC824 only - (char *)FLASH_SECTOR_23, // for LPC824 only - (char *)FLASH_SECTOR_24, // for LPC824 only - (char *)FLASH_SECTOR_25, // for LPC824 only - (char *)FLASH_SECTOR_26, // for LPC824 only - (char *)FLASH_SECTOR_27, // for LPC824 only - (char *)FLASH_SECTOR_28, // for LPC824 only - (char *)FLASH_SECTOR_29, // for LPC824 only - (char *)FLASH_SECTOR_30, // for LPC824 only - (char *)FLASH_SECTOR_31 // for LPC824 only -}; - -#endif - -/** Error code by IAP routine - * - * Table 588 "ISP Return Codes Summary", Section 7.15 "ISP Return Codes", usermanual - */ - -enum error_code { - CMD_SUCCESS, - INVALID_COMMAND, - SRC_ADDR_ERROR, - DST_ADDR_ERROR, - SRC_ADDR_NOT_MAPPED, - DST_ADDR_NOT_MAPPED, - COUNT_ERROR, - INVALID_SECTOR, - SECTOR_NOT_BLANK, - SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION, - COMPARE_ERROR, - BUSY, - PARAM_ERROR, - ADDR_ERROR, - ADDR_NOT_MAPPED, - CMD_LOCKED, - INVALID_CODE, - INVALID_BAUD_RATE, - INVALID_STOP_BIT, - CODE_READ_PROTECTION_ENABLED -}; - - - -/* - * IAP routine entry - * - * "IAP commands" - */ - -#define IAP_LOCATION 0x1fff1ff1 -typedef void (*IAP_call)(unsigned int [], unsigned int []); - - -/** IAP class - * - * Interface for internal flash memory access - */ - -class IAP -{ -public: - - /** Constructor for IAP - * - */ - IAP() : iap_entry( reinterpret_cast<IAP_call>(IAP_LOCATION) ), cclk_kHz( SystemCoreClock / 1000 ) {} +/* IAP Command Status Codes */ +#define IAP_STA_CMD_SUCCESS 0 +#define IAP_STA_INVALID_COMMAND 1 +#define IAP_STA_SRC_ADDR_ERROR 2 +#define IAP_STA_DST_ADDR_ERROR 3 +#define IAP_STA_SRC_ADDR_NOT_MAPPED 4 +#define IAP_STA_DST_ADDR_NOT_MAPPED 5 +#define IAP_STA_COUNT_ERROR 6 +#define IAP_STA_INVALID_SECTOR 7 +#define IAP_STA_SECTOR_NOT_BLANK 8 +#define IAP_STA_SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION 9 +#define IAP_STA_COMPARE_ERROR 10 +#define IAP_STA_BUSY 11 +#define IAP_STA_INVALD_PARAM 12 - /** Reinvoke ISP - * - * @return error code - */ - int reinvoke_isp( void ); - - /** Read part identification number - * - * @return device ID - * @see read_serial() - */ - int read_ID( void ); - - /** Read device serial number - * - * @return device serial number - * @see read_ID() - */ - int *read_serial( void ); - - /** Blank check sector(s) - * - * @param start a Start Sector Number - * @param end an End Sector Number (should be greater than or equal to start sector number). - * @return error code: CMD_SUCCESS | BUSY | SECTOR_NOT_BLANK | INVALID_SECTOR - */ - int blank_check( int start, int end ); - - /** Erase Sector(s) - * - * @param start a Start Sector Number - * @param end an End Sector Number (should be greater than or equal to start sector number). - * @return error code: CMD_SUCCESS | BUSY | SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION | INVALID_SECTOR - */ - int erase( int start, int end ); - - /** Prepare sector(s) for write operation - * - * @param start a Start Sector Number - * @param end an End Sector Number (should be greater than or equal to start sector number). - * @return error code: CMD_SUCCESS | BUSY | INVALID_SECTOR - */ - int prepare( int start, int end ); - - /** Copy RAM to Flash - * - * @param source_addr Source RAM address from which data bytes are to be read. This address should be a word boundary. - * @param target_addr Destination flash address where data bytes are to be written. This address should be a 256 byte boundary. - * @param size Number of bytes to be written. Should be 256 | 512 | 1024 | 4096. - * @return error code: CMD_SUCCESS | SRC_ADDR_ERROR (Address not a word boundary) | DST_ADDR_ERROR (Address not on correct boundary) | SRC_ADDR_NOT_MAPPED | DST_ADDR_NOT_MAPPED | COUNT_ERROR (Byte count is not 256 | 512 | 1024 | 4096) | SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION | BUSY - */ - int write( char *source_addr, char *target_addr, int size ); - - /** Compare <address1> <address2> <no of bytes> - * - * @param source_addr Starting flash or RAM address of data bytes to be compared. This address should be a word boundary. - * @param target_addr Starting flash or RAM address of data bytes to be compared. This address should be a word boundary. - * @param size Number of bytes to be compared; should be a multiple of 4. - * @return error code: CMD_SUCCESS | COMPARE_ERROR | COUNT_ERROR (Byte count is not a multiple of 4) | ADDR_ERROR | ADDR_NOT_MAPPED - */ - int compare( char *source_addr, char *target_addr, int size ); +/* Define the flash page size, this is the minimum amount of data can be written in one operation */ +#define IAP_FLASH_PAGE_SIZE_BYTES 256 +#define IAP_FLASH_PAGE_SIZE_WORDS (IAP_FLASH_PAGE_SIZE_BYTES >> 2) - /** Read Boot code version number - * - * @return 2 bytes of boot code version number - */ - int read_BootVer( void ); - - /** Get user reserved flash start address - * - * @return start address of user reserved flash memory - * @see reserved_flash_area_size() - */ - - char *reserved_flash_area_start( void ); - - /** Get user reserved flash size - * - * @return size of user reserved flash memory - * @see reserved_flash_area_start() - */ - int reserved_flash_area_size( void ); - -#if defined(TARGET_LPC11UXX) +void vIAP_ReinvokeISP(void); +uint32_t u32IAP_ReadPartID(uint32_t *pu32PartID); +uint32_t u32IAP_ReadBootVersion(uint32_t *pu32Major, uint32_t *pu32Minor); +uint32_t u32IAP_EraseSectors(uint32_t u32StartSector, uint32_t u32EndSector); +uint32_t u32IAP_PrepareSectors(uint32_t u32StartSector, uint32_t u32EndSector); +uint32_t u32IAP_CopyRAMToFlash(uint32_t u32DstAddr, uint32_t u32SrcAddr, uint32_t u32Len); +uint32_t u32IAP_BlankCheckSectors(uint32_t u32StartSector, uint32_t u32EndSector, uint32_t *pu32Result); +uint32_t u32IAP_Compare(uint32_t u32DstAddr, uint32_t u32SrcAddr, uint32_t u32Len, uint32_t *pu32Offset); +void u32IAP_ReadSerialNumber(uint32_t *pu32byte0, uint32_t *pu32byte1, uint32_t *pu32byte2, uint32_t *pu32byte3); - /** Copy RAM to EEPROM (LPC11U24) - * - * @param source_addr Source RAM address from which data bytes are to be read. - * @param target_addr Destination EEPROM address where data bytes are to be written. - * @param size Number of bytes to be written. - * @return error code: CMD_SUCCESS | SRC_ADDR_NOT_MAPPED | DST_ADDR_NOT_MAPPED - * Remark: The top 64 bytes of the EEPROM memory are reserved and cannot be written to. - */ - int write_eeprom( char *source_addr, char *target_addr, int size ); - - /** Copy EEPROM to RAM (LPC11U24) - * - * @param source_addr Source EEPROM address from which data bytes are to be read. - * @param target_addr Destination RAM address where data bytes are to be written. - * @param size Number of bytes to be written. - * @return error code: CMD_SUCCESS | SRC_ADDR_NOT_MAPPED | DST_ADDR_NOT_MAPPED - * Remark: The top 64 bytes of the EEPROM memory are reserved and cannot be written to. - */ - int read_eeprom( char *source_addr, char *target_addr, int size ); - -#elif defined(TARGET_LPC81X) || defined(TARGET_LPC82X) - - /** Erase page(s) (LPC812, LPC824) - * - * @param start Start page number. - * @param end End page number (should be greater than or equal to start page). - * @return error code: CMD_SUCCESS | BUSY | SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION | INVALID_SECTOR - */ - int erase_page( int start, int end ); - -#endif - -private: - IAP_call iap_entry; - unsigned int IAP_command[ 5 ]; - unsigned int IAP_result[ 5 ]; - int cclk_kHz; -} -; - -#endif // #ifndef MBED_IAP +#endif /* end __IAP_H */ +/***************************************************************************** +** End Of File +******************************************************************************/ \ No newline at end of file