Dmitry Kovalev
forkd
Fork of
LG2
by 
Dmitry Kovalev
Diff: host/Source/CMSIS/CM3/DeviceSupport/NXP/LPC13xx/system_LPC13xx.c
- Revision:
- 23:12e6183f04d4
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/host/Source/CMSIS/CM3/DeviceSupport/NXP/LPC13xx/system_LPC13xx.c Wed Feb 03 10:44:42 2016 +0300
@@ -0,0 +1,479 @@
+/**************************************************************************//**
+ * @file system_LPC13xx.c
+ * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Source File
+ * for the NXP LPC13xx Device Series
+ * @version V1.02
+ * @date 21. October 2009
+ *
+ * @note
+ * Copyright (C) 2009 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+
+#include <stdint.h>
+#include "LPC13xx.h"
+
+/*
+//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+*/
+
+/*--------------------- Clock Configuration ----------------------------------
+//
+// <e> Clock Configuration
+// <e1> System Clock Setup
+// <e2> System Oscillator Enable
+// <o3.1> Select System Oscillator Frequency Range
+// <0=> 1 - 20 MHz
+// <1=> 15 - 25 MHz
+// </e2>
+// <e4> Watchdog Oscillator Enable
+// <o5.0..4> Select Divider for Fclkana
+// <0=> 2 <1=> 4 <2=> 6 <3=> 8
+// <4=> 10 <5=> 12 <6=> 14 <7=> 16
+// <8=> 18 <9=> 20 <10=> 22 <11=> 24
+// <12=> 26 <13=> 28 <14=> 30 <15=> 32
+// <16=> 34 <17=> 36 <18=> 38 <19=> 40
+// <20=> 42 <21=> 44 <22=> 46 <23=> 48
+// <24=> 50 <25=> 52 <26=> 54 <27=> 56
+// <28=> 58 <29=> 60 <30=> 62 <31=> 64
+// <o5.5..8> Select Watchdog Oscillator Analog Frequency (Fclkana)
+// <0=> Disabled
+// <1=> 0.5 MHz
+// <2=> 0.8 MHz
+// <3=> 1.1 MHz
+// <4=> 1.4 MHz
+// <5=> 1.6 MHz
+// <6=> 1.8 MHz
+// <7=> 2.0 MHz
+// <8=> 2.2 MHz
+// <9=> 2.4 MHz
+// <10=> 2.6 MHz
+// <11=> 2.7 MHz
+// <12=> 2.9 MHz
+// <13=> 3.1 MHz
+// <14=> 3.2 MHz
+// <15=> 3.4 MHz
+// </e4>
+// <o6> Select Input Clock for sys_pllclkin (Register: SYSPLLCLKSEL)
+// <0=> IRC Oscillator
+// <1=> System Oscillator
+// <2=> WDT Oscillator
+// <3=> Invalid
+// <e7> Use System PLL
+// <i> F_pll = M * F_in
+// <i> F_in must be in the range of 10 MHz to 25 MHz
+// <o8.0..4> M: PLL Multiplier Selection
+// <1-32><#-1>
+// <o8.5..6> P: PLL Divider Selection
+// <0=> 2
+// <1=> 4
+// <2=> 8
+// <3=> 16
+// <o8.7> DIRECT: Direct CCO Clock Output Enable
+// <o8.8> BYPASS: PLL Bypass Enable
+// </e7>
+// <o9> Select Input Clock for Main clock (Register: MAINCLKSEL)
+// <0=> IRC Oscillator
+// <1=> Input Clock to System PLL
+// <2=> WDT Oscillator
+// <3=> System PLL Clock Out
+// </e1>
+// <e10> USB Clock Setup
+// <e11> Use USB PLL
+// <i> F_pll = M * F_in
+// <i> F_in must be in the range of 10 MHz to 25 MHz
+// <o12.0..1> Select Input Clock for usb_pllclkin (Register: USBPLLCLKSEL)
+// <0=> IRC Oscillator
+// <1=> System Oscillator
+// <o13.0..4> M: PLL Multiplier Selection
+// <1-32><#-1>
+// <o13.5..6> P: PLL Divider Selection
+// <0=> 2
+// <1=> 4
+// <2=> 8
+// <3=> 16
+// <o13.7> DIRECT: Direct CCO Clock Output Enable
+// <o13.8> BYPASS: PLL Bypass Enable
+// </e11>
+// </e10>
+// <o14.0..7> System AHB Divider <0-255>
+// <i> 0 = is disabled
+// <o15.0> SYS Clock Enable
+// <o15.1> ROM Clock Enable
+// <o15.2> RAM Clock Enable
+// <o15.3> FLASH1 Clock Enable
+// <o15.4> FLASH2 Clock Enable
+// <o15.5> I2C Clock Enable
+// <o15.6> GPIO Clock Enable
+// <o15.7> CT16B0 Clock Enable
+// <o15.8> CT16B1 Clock Enable
+// <o15.9> CT32B0 Clock Enable
+// <o15.10> CT32B1 Clock Enable
+// <o15.11> SSP Clock Enable
+// <o15.12> UART Clock Enable
+// <o15.13> ADC Clock Enable
+// <o15.14> USB_REG Clock Enable
+// <o15.15> SWDT Clock Enable
+// <o15.16> IOCON Clock Enable
+// </e>
+*/
+#define CLOCK_SETUP 1
+#define SYSCLK_SETUP 1
+#define SYSOSC_SETUP 1
+#define SYSOSCCTRL_Val 0x00000000
+#define WDTOSC_SETUP 0
+#define WDTOSCCTRL_Val 0x000000A0
+#define SYSPLLCLKSEL_Val 0x00000001
+#define SYSPLL_SETUP 1
+#define SYSPLLCTRL_Val 0x00000005
+#define MAINCLKSEL_Val 0x00000003
+#define USBCLK_SETUP 0
+#define USBPLL_SETUP 1
+#define USBPLLCLKSEL_Val 0x00000001
+#define USBPLLCTRL_Val 0x00000003
+#define SYSAHBCLKDIV_Val 0x00000001
+#define AHBCLKCTRL_Val 0x0001005F
+
+/*--------------------- Memory Mapping Configuration -------------------------
+//
+// <e> Memory Mapping
+// <o1.0..1> System Memory Remap (Register: SYSMEMREMAP)
+// <0=> Bootloader mapped to address 0
+// <1=> RAM mapped to address 0
+// <2=> Flash mapped to address 0
+// <3=> Flash mapped to address 0
+// </e>
+*/
+#define MEMMAP_SETUP 0
+#define SYSMEMREMAP_Val 0x00000001
+
+/*
+//-------- <<< end of configuration section >>> ------------------------------
+*/
+
+/*----------------------------------------------------------------------------
+ Check the register settings
+ *----------------------------------------------------------------------------*/
+#define CHECK_RANGE(val, min, max) ((val < min) || (val > max))
+#define CHECK_RSVD(val, mask) (val & mask)
+
+/* Clock Configuration -------------------------------------------------------*/
+#if (CHECK_RSVD((SYSOSCCTRL_Val), ~0x00000003))
+ #error "SYSOSCCTRL: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RSVD((WDTOSCCTRL_Val), ~0x000001FF))
+ #error "WDTOSCCTRL: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RANGE((SYSPLLCLKSEL_Val), 0, 2))
+ #error "SYSPLLCLKSEL: Value out of range!"
+#endif
+
+#if (CHECK_RSVD((SYSPLLCTRL_Val), ~0x000001FF))
+ #error "SYSPLLCTRL: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RSVD((MAINCLKSEL_Val), ~0x00000003))
+ #error "MAINCLKSEL: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RANGE((USBPLLCLKSEL_Val), 0, 1))
+ #error "USBPLLCLKSEL: Value out of range!"
+#endif
+
+#if (CHECK_RSVD((USBPLLCTRL_Val), ~0x000001FF))
+ #error "USBPLLCTRL: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RSVD((USBPLLUEN_Val), ~0x00000001))
+ #error "USBPLLUEN: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RANGE((SYSAHBCLKDIV_Val), 0, 255))
+ #error "SYSAHBCLKDIV: Value out of range!"
+#endif
+
+#if (CHECK_RSVD((AHBCLKCTRL_Val), ~0x0001FFFF))
+ #error "AHBCLKCTRL: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RSVD((SYSMEMREMAP_Val), ~0x00000003))
+ #error "SYSMEMREMAP: Invalid values of reserved bits!"
+#endif
+
+
+/*----------------------------------------------------------------------------
+ DEFINES
+ *----------------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------------
+ Define clocks
+ *----------------------------------------------------------------------------*/
+#define __XTAL (12000000UL) /* Oscillator frequency */
+#define __SYS_OSC_CLK ( __XTAL) /* Main oscillator frequency */
+#define __IRC_OSC_CLK (12000000UL) /* Internal RC oscillator frequency */
+
+
+#define __FREQSEL ((WDTOSCCTRL_Val >> 5) & 0x0F)
+#define __DIVSEL (((WDTOSCCTRL_Val & 0x1F) << 1) + 2)
+
+#if (CLOCK_SETUP) /* Clock Setup */
+ #if (SYSCLK_SETUP) /* System Clock Setup */
+ #if (WDTOSC_SETUP) /* Watchdog Oscillator Setup*/
+ #if (__FREQSEL == 0)
+ #define __WDT_OSC_CLK ( 400000 / __DIVSEL)
+ #elif (__FREQSEL == 1)
+ #define __WDT_OSC_CLK ( 500000 / __DIVSEL)
+ #elif (__FREQSEL == 2)
+ #define __WDT_OSC_CLK ( 800000 / __DIVSEL)
+ #elif (__FREQSEL == 3)
+ #define __WDT_OSC_CLK (1100000 / __DIVSEL)
+ #elif (__FREQSEL == 4)
+ #define __WDT_OSC_CLK (1400000 / __DIVSEL)
+ #elif (__FREQSEL == 5)
+ #define __WDT_OSC_CLK (1600000 / __DIVSEL)
+ #elif (__FREQSEL == 6)
+ #define __WDT_OSC_CLK (1800000 / __DIVSEL)
+ #elif (__FREQSEL == 7)
+ #define __WDT_OSC_CLK (2000000 / __DIVSEL)
+ #elif (__FREQSEL == 8)
+ #define __WDT_OSC_CLK (2200000 / __DIVSEL)
+ #elif (__FREQSEL == 9)
+ #define __WDT_OSC_CLK (2400000 / __DIVSEL)
+ #elif (__FREQSEL == 10)
+ #define __WDT_OSC_CLK (2600000 / __DIVSEL)
+ #elif (__FREQSEL == 11)
+ #define __WDT_OSC_CLK (2700000 / __DIVSEL)
+ #elif (__FREQSEL == 12)
+ #define __WDT_OSC_CLK (2900000 / __DIVSEL)
+ #elif (__FREQSEL == 13)
+ #define __WDT_OSC_CLK (3100000 / __DIVSEL)
+ #elif (__FREQSEL == 14)
+ #define __WDT_OSC_CLK (3200000 / __DIVSEL)
+ #else
+ #define __WDT_OSC_CLK (3400000 / __DIVSEL)
+ #endif
+ #else
+ #define __WDT_OSC_CLK (1600000 / 2)
+ #endif // WDTOSC_SETUP
+
+ /* sys_pllclkin calculation */
+ #if ((SYSPLLCLKSEL_Val & 0x03) == 0)
+ #define __SYS_PLLCLKIN (__IRC_OSC_CLK)
+ #elif ((SYSPLLCLKSEL_Val & 0x03) == 1)
+ #define __SYS_PLLCLKIN (__SYS_OSC_CLK)
+ #elif ((SYSPLLCLKSEL_Val & 0x03) == 2)
+ #define __SYS_PLLCLKIN (__WDT_OSC_CLK)
+ #else
+ #define __SYS_PLLCLKIN (0)
+ #endif
+
+ #if (SYSPLL_SETUP) /* System PLL Setup */
+ #define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * ((SYSPLLCTRL_Val & 0x01F) + 1))
+ #else
+ #define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * (1))
+ #endif // SYSPLL_SETUP
+
+ /* main clock calculation */
+ #if ((MAINCLKSEL_Val & 0x03) == 0)
+ #define __MAIN_CLOCK (__IRC_OSC_CLK)
+ #elif ((MAINCLKSEL_Val & 0x03) == 1)
+ #define __MAIN_CLOCK (__SYS_PLLCLKIN)
+ #elif ((MAINCLKSEL_Val & 0x03) == 2)
+ #define __MAIN_CLOCK (__WDT_OSC_CLK)
+ #elif ((MAINCLKSEL_Val & 0x03) == 3)
+ #define __MAIN_CLOCK (__SYS_PLLCLKOUT)
+ #else
+ #define __MAIN_CLOCK (0)
+ #endif
+
+ #define __SYSTEM_CLOCK (__MAIN_CLOCK / SYSAHBCLKDIV_Val)
+
+ #else // SYSCLK_SETUP
+ #if (SYSAHBCLKDIV_Val == 0)
+ #define __SYSTEM_CLOCK (0)
+ #else
+ #define __SYSTEM_CLOCK (__XTAL / SYSAHBCLKDIV_Val)
+ #endif
+ #endif // SYSCLK_SETUP
+
+#else
+ #define __SYSTEM_CLOCK (__XTAL)
+#endif // CLOCK_SETUP
+
+
+/*----------------------------------------------------------------------------
+ Clock Variable definitions
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = __SYSTEM_CLOCK;/*!< System Clock Frequency (Core Clock)*/
+
+
+/*----------------------------------------------------------------------------
+ Clock functions
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void) /* Get Core Clock Frequency */
+{
+ uint32_t wdt_osc = 0;
+
+ /* Determine clock frequency according to clock register values */
+ switch ((LPC_SYSCON->WDTOSCCTRL >> 5) & 0x0F) {
+ case 0: wdt_osc = 400000; break;
+ case 1: wdt_osc = 500000; break;
+ case 2: wdt_osc = 800000; break;
+ case 3: wdt_osc = 1100000; break;
+ case 4: wdt_osc = 1400000; break;
+ case 5: wdt_osc = 1600000; break;
+ case 6: wdt_osc = 1800000; break;
+ case 7: wdt_osc = 2000000; break;
+ case 8: wdt_osc = 2200000; break;
+ case 9: wdt_osc = 2400000; break;
+ case 10: wdt_osc = 2600000; break;
+ case 11: wdt_osc = 2700000; break;
+ case 12: wdt_osc = 2900000; break;
+ case 13: wdt_osc = 3100000; break;
+ case 14: wdt_osc = 3200000; break;
+ case 15: wdt_osc = 3400000; break;
+ }
+ wdt_osc /= ((LPC_SYSCON->WDTOSCCTRL & 0x1F) << 1) + 2;
+
+ switch (LPC_SYSCON->MAINCLKSEL & 0x03) {
+ case 0: /* Internal RC oscillator */
+ SystemCoreClock = __IRC_OSC_CLK;
+ break;
+ case 1: /* Input Clock to System PLL */
+ switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
+ case 0: /* Internal RC oscillator */
+ SystemCoreClock = __IRC_OSC_CLK;
+ break;
+ case 1: /* System oscillator */
+ SystemCoreClock = __SYS_OSC_CLK;
+ break;
+ case 2: /* WDT Oscillator */
+ SystemCoreClock = wdt_osc;
+ break;
+ case 3: /* Reserved */
+ SystemCoreClock = 0;
+ break;
+ }
+ break;
+ case 2: /* WDT Oscillator */
+ SystemCoreClock = wdt_osc;
+ break;
+ case 3: /* System PLL Clock Out */
+ switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
+ case 0: /* Internal RC oscillator */
+ if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
+ SystemCoreClock = __IRC_OSC_CLK;
+ } else {
+ SystemCoreClock = __IRC_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
+ }
+ break;
+ case 1: /* System oscillator */
+ if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
+ SystemCoreClock = __SYS_OSC_CLK;
+ } else {
+ SystemCoreClock = __SYS_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
+ }
+ break;
+ case 2: /* WDT Oscillator */
+ if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
+ SystemCoreClock = wdt_osc;
+ } else {
+ SystemCoreClock = wdt_osc * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
+ }
+ break;
+ case 3: /* Reserved */
+ SystemCoreClock = 0;
+ break;
+ }
+ break;
+ }
+
+ SystemCoreClock /= LPC_SYSCON->SYSAHBCLKDIV;
+
+}
+
+/**
+ * Initialize the system
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Setup the microcontroller system.
+ * Initialize the System.
+ */
+void SystemInit (void)
+{
+#if (CLOCK_SETUP) /* Clock Setup */
+#if (SYSCLK_SETUP) /* System Clock Setup */
+#if (SYSOSC_SETUP) /* System Oscillator Setup */
+ uint32_t i;
+
+ LPC_SYSCON->PDRUNCFG &= ~(1 << 5); /* Power-up System Osc */
+ LPC_SYSCON->SYSOSCCTRL = SYSOSCCTRL_Val;
+ for (i = 0; i < 200; i++) __NOP();
+ LPC_SYSCON->SYSPLLCLKSEL = SYSPLLCLKSEL_Val; /* Select PLL Input */
+ LPC_SYSCON->SYSPLLCLKUEN = 0x01; /* Update Clock Source */
+ LPC_SYSCON->SYSPLLCLKUEN = 0x00; /* Toggle Update Register */
+ LPC_SYSCON->SYSPLLCLKUEN = 0x01;
+ while (!(LPC_SYSCON->SYSPLLCLKUEN & 0x01)); /* Wait Until Updated */
+#if (SYSPLL_SETUP) /* System PLL Setup */
+ LPC_SYSCON->SYSPLLCTRL = SYSPLLCTRL_Val;
+ LPC_SYSCON->PDRUNCFG &= ~(1 << 7); /* Power-up SYSPLL */
+ while (!(LPC_SYSCON->SYSPLLSTAT & 0x01)); /* Wait Until PLL Locked */
+#endif
+#endif
+#if (WDTOSC_SETUP) /* Watchdog Oscillator Setup*/
+ LPC_SYSCON->WDTOSCCTRL = WDTOSCCTRL_Val;
+ LPC_SYSCON->PDRUNCFG &= ~(1 << 6); /* Power-up WDT Clock */
+#endif
+ LPC_SYSCON->MAINCLKSEL = MAINCLKSEL_Val; /* Select PLL Clock Output */
+ LPC_SYSCON->MAINCLKUEN = 0x01; /* Update MCLK Clock Source */
+ LPC_SYSCON->MAINCLKUEN = 0x00; /* Toggle Update Register */
+ LPC_SYSCON->MAINCLKUEN = 0x01;
+ while (!(LPC_SYSCON->MAINCLKUEN & 0x01)); /* Wait Until Updated */
+#endif
+
+#if (USBCLK_SETUP) /* USB Clock Setup */
+ LPC_SYSCON->PDRUNCFG &= ~(1 << 10); /* Power-up USB PHY */
+#if (USBPLL_SETUP) /* USB PLL Setup */
+ LPC_SYSCON->PDRUNCFG &= ~(1 << 8); /* Power-up USB PLL */
+ LPC_SYSCON->USBPLLCLKSEL = USBPLLCLKSEL_Val; /* Select PLL Input */
+ LPC_SYSCON->USBPLLCLKUEN = 0x01; /* Update Clock Source */
+ LPC_SYSCON->USBPLLCLKUEN = 0x00; /* Toggle Update Register */
+ LPC_SYSCON->USBPLLCLKUEN = 0x01;
+ while (!(LPC_SYSCON->USBPLLCLKUEN & 0x01)); /* Wait Until Updated */
+ LPC_SYSCON->USBPLLCTRL = USBPLLCTRL_Val;
+ while (!(LPC_SYSCON->USBPLLSTAT & 0x01)); /* Wait Until PLL Locked */
+ LPC_SYSCON->USBCLKSEL = 0x00; /* Select USB PLL */
+#else
+ LPC_SYSCON->USBCLKSEL = 0x01; /* Select Main Clock */
+#endif
+#else
+ LPC_SYSCON->PDRUNCFG |= (1 << 10); /* Power-down USB PHY */
+ LPC_SYSCON->PDRUNCFG |= (1 << 8); /* Power-down USB PLL */
+#endif
+
+ LPC_SYSCON->SYSAHBCLKDIV = SYSAHBCLKDIV_Val;
+ LPC_SYSCON->SYSAHBCLKCTRL = AHBCLKCTRL_Val;
+#endif
+
+
+#if (MEMMAP_SETUP || MEMMAP_INIT) /* Memory Mapping Setup */
+ LPC_SYSCON->SYSMEMREMAP = SYSMEMREMAP_Val;
+#endif
+}