Dmitry Kovalev
/
LGfiltr
forkd
Fork of LGstaandart by
Command.h
- Committer:
- Kovalev_D
- Date:
- 2016-08-29
- Revision:
- 191:40028201ddad
- Parent:
- 181:0b022246c43c
- Child:
- 205:775d54fdf646
File content as of revision 191:40028201ddad:
extern unsigned int Err; extern unsigned int ParamIn; extern unsigned int Rate_Flag; extern unsigned int CountBuFFIn; extern unsigned int Param1; extern unsigned int Param2; extern unsigned int CountParam; #define IMG_START_SECTOR 0x00010000 /* Sector 16 */ #define IMG_END_SECTOR 0x00017FFF /* Sector 20 */ #define SOC_In 0xCC //e. attribute of command //r. признак команды //#define SOC_Out 0xDD #define BROADCAST_ADDRESS 0x1f //e. the broadcasting address ( shared for 3 GLD ) //r. широковещательный адрес (общий для 3-х ГЛД) #define CMD_DELTA_PS 0xa000 //e. the code of the B_DeltaPS command //r. код команды B_DeltaPS #define CMD_DELTA_BINS 0xb000 //e. the code of the B_DeltaBINS command //r. код команды B_DeltaBINS #define CMD_DELTA_SF 0xb200 //e. the code of the B_DeltaSF command //r. код команды B_DeltaSF #define CMD_DEV_MODE 0xA500 //e. the code of the Device_Mode command //r. код команды Device_Mode #define CMD_BIT_MODE 0xA700 //e. the code of the B.I.T. command //r. код команды B.I.T.(встороенного тестирования) #define CMD_RATE 0x0000 //e. the code of the Rate command //r. код команды Rate #define CMD_DELTA 0x0f00 //e. the code of the Delta command //r. код команды Delta #define CMD_D_PERIOD_W 0xf000 //e. the code of the D_Period_W command //r. код команды D_Period_W //#define CMD_MAINT 0x99 //e. the code of the Maintenance mode command //r. код команды Maintenance mode #define SUBCMD_M_STIMUL 0x0a00 //e. the code of the Stimul command //r. код команды Stimul #define SUBCMD_M_RESET 0x8000 //e. software device reset(restart) //r. программный сброс (рестарт) прибора #define SUBCMD_M_CLEAR 0xda00 //e. reset of the register of errors of line 485 //r. очистка регистра ошибок линии 485 #define SUBCMD_M_MIRR 0xda01 //e. return previous contents of the receiver buffer //r. возврат предыдущего содержимого буфера приемника #define SUBCMD_M_LDPAR_F 0xda02 //e. load GLD parameters from Flash-memory //r. загрузить параметры ГЛД из флэш-памяти #define SUBCMD_M_LDPAR_D 0xda03 //e. set GLD parameters by procedure of initialization //r. установить параметры ГЛД процедурой инициализации #define SUBCMD_M_START 0xda04 //e. switch on the GLD //r. включить ГЛД #define SUBCMD_M_STOP 0xda40 //e. switch off the GLD //r. выключить ГЛД #define SUBCMD_M_PULSE 0xda0a //e. generation of the light-up pulse //r. генерация импульса поджига #define SUBCMD_M_CTL_R 0xd900 //e. reading the control register of the device //r. чтение регистра управления устройства #define SUBCMD_M_CTL_M 0xd800 //e. modification of bit of the control register //r. модификация бита регистра управления #define SUBCMD_M_RATE 0xdd00 //e. delivery of a stack of parameters M_Rate (Rate2, Rate3) //r. выдача набора параметров M_Rate (Rate2, Rate3) #define SUBCMD_M_TMP_W 0xe000 //e. writing to the AD7714 circuit (temperature sensors) //r. запись в схемы AD7714 (измерители температуры) #define SUBCMD_M_TMP_R 0xe100 //e. reading from the AD7714 circuit (temperature sensors) //r. чтение из схем AD7714 (измерители температуры) #define SUBCMD_M_E5R_W 0xe200 //e. writing to the register of a mode of the Elio5 card //r. запись в регистр режима платы Elio5 #define SUBCMD_M_ADC_R 0xe300 //e. reading data from the ADC of the Elio5 card //r. чтение данных из АЦП платы Elio5 #define SUBCMD_M_VIB_W 0xe400 //e. loading of the oscillation period of the dither drive //r. загрузка периода колебаний вибропривода #define SUBCMD_M_CNT_R 0xe500 //e. reading data from the counters of the Elio5 card //r. чтение данных из счетчиков платы Elio5 #define SUBCMD_M_GPH_W 0xe600 //e. loading gain factors of photodetector channels //r. загрузка коэффициентов усиления каналов фотоприемника #define SUBCMD_M_FLG_R 0xe700 //e. reading data from the register of input flags //r. чтение данных из регистра входных флагов #define SUBCMD_M_PARAM_W 0xe800 //e. writing working parameter to the data memory //r. запись рабочего параметра в память данных #define SUBCMD_M_PARAM_R 0xe900 //e. reading working parameter of the GLD from the data memory //r. чтение рабочего параметра GLD из памяти данных #define SUBCMD_M_E5RA_W 0xea00 //e. writing in 1st additional (A) register of a mode of the Elio5 card //r. запись в 1-ый дополнительный (А) регистр режима платы Elio5 extern int tempNL,tempNH; void Read_CMD(void); unsigned int Check(char *c, unsigned int Count); extern void CMD_Rate(void); extern void CMD_Rate2(void); extern unsigned int memdump( char *base, int n ); extern void GoBoot(void); extern void WriteFlash(void); extern void TechLog(void); extern void DropDelay(void); extern void M_RateA(void);