![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
forkd
Fork of LGstaandart by
InputOutput.c
- Committer:
- Kovalev_D
- Date:
- 2018-01-31
- Revision:
- 232:130a2b5003e6
- Parent:
- 231:079835d508ef
File content as of revision 232:130a2b5003e6:
#include "Global.h" INPUT Input; //OUTPUT Output; volatile uint32_t I2CMasterState = I2C_IDLE; volatile uint32_t I2CMasterBuffer[I2C_WRITELENGTH]; int ExchangeErr = 0; //----------------------temp--------------------- extern char test; /****************************************************************************** ** Function name: G_Photo_Exchange ** ** Descriptions: Driver for I2C exchange ** ** parameters: None ** Returned value: None ** ******************************************************************************/ void G_Photo_Exchange(void) { uint32_t StatValue; static uint32_t WrIndex; static int32_t time_out = TIMEOUT; if (I2CMasterState) return; //e.transmitting is not active, go away if (--time_out < 0) //e. valid time period elapsed, go away { time_out = TIMEOUT; I2CMasterState = I2C_IDLE; //e. timer elapsed, go away LPC_I2C0->CONSET = I2CONSET_STO; //e. Set Stop flag LPC_I2C0->CONCLR = I2CONCLR_AAC | I2CONCLR_SIC | I2CONCLR_STAC; return; } else if (!(LPC_I2C0->CONSET & I2CONSET_SI)) //e. state of I2C bus has not been changed return; StatValue = LPC_I2C0->STAT; switch ( StatValue ) { case 0x08: // A Start condition is issued (write data for the first potentiometer) WrIndex = 0; time_out = TIMEOUT; //e. enable countdown LPC_I2C0->DAT = I2CMasterBuffer[WrIndex++]; //e. send address LPC_I2C0->CONCLR = (I2CONCLR_SIC | I2CONCLR_STAC); //e .clear interrupt bit and start bit break; case 0x10: // A repeated started is issued (write data for the second potentiometer) LPC_I2C0->DAT = I2CMasterBuffer[WrIndex++]; //e. send address LPC_I2C0->CONCLR = (I2CONCLR_SIC | I2CONCLR_STAC); //e .clear interrupt bit and start bit break; case 0x18: //e. Regardless, it's a ACK after slave address reading LPC_I2C0->DAT = I2CMasterBuffer[WrIndex++]; //e. send another byte LPC_I2C0->CONCLR = I2CONCLR_SIC; //e. clear interrupt bit break; case 0x28: //e. Regardless it's a ACK after data byte if (WrIndex == I2C_WRITELENGTH) //e. we have transmitted the data for the B potentiometer { I2CMasterState = I2C_IDLE; LPC_I2C0->CONSET = I2CONSET_STO; //e. Set Stop flag // Output.Str.Cnt_Dif = 300; } else if (WrIndex == 3) { LPC_I2C0->CONSET = I2CONSET_STA; // Output.Str.Cnt_Dif = 200; } else { LPC_I2C0->DAT = I2CMasterBuffer[WrIndex++]; //e. send another byte // Output.Str.Cnt_Dif = 100; } LPC_I2C0->CONCLR = I2CONCLR_SIC; //e. clear interrupt bit break; case 0x20: //e. no aknowledgement after address transmitting case 0x30: //e. no aknowledgement after data block transmitting LPC_I2C0->CONSET = I2CONSET_STO; //e. Set Stop flag LPC_I2C0->CONCLR = (I2CONCLR_SIC | I2CONCLR_STAC); I2CMasterState = I2C_IDLE; //e. fix new state break; } return; } /****************************************************************************** ** Function name: DAC_ADC_Exchange ** ** Descriptions: Loading data to DACs and initialization of ADC reading ** ** parameters: None ** Returned value: None ** ******************************************************************************/ void DAC_ADC_Exchange() { //-------------------------loading data from ADC to buffer--------------------------------------- //int x; ExchangeErr &= ~ADC_ERR_MSK; //e. сбросить флаг ошибки if (LPC_SSP0->SR & SSP_BUSY) //e. если буфер передатчика не полон { ExchangeErr |= ADC_ERR_MSK; //e. установить флаг ошибки } else { LPC_SSP0->DR = 0x8001; //записать 0x8001 в регистр передачи. if (WRITE_DAC0 & 1)//если нечетный такт то { LPC_SSP0->DR = WRITE_DAC0; //e.команда для ЦАП_0 передавать. // LPC_SSP0->DR = (-Output.ArrayOut[3]+32767); //e. передача 12 бит } else //если такт четный. { LPC_SSP0->DR = WRITE_DAC1 ; //e.команда для ЦАП_1 передавать. // LPC_SSP0->DR = (Output.ArrayOut[0]<<1) & 0xFFF0; //e. передача 12 бит } } } /****************************************************************************** ** Function name: ADC_Input ** ** Descriptions: Reading data from ADC ** ** parameters: None ** Returned value: None ** ******************************************************************************/ void ADC_Input() { uint32_t Dummy; //---------------------read data from ADC buffer--------------------------------------------- Dummy = Dummy; ExchangeErr &= ~ADC_ERR_MSK; if (LPC_SSP0->SR & SSP_BUSY) //если буфер фифо не полный(передача ативна) { ExchangeErr |= ADC_ERR_MSK; //установить флаг ошибки if (!(LPC_SSP0->SR & TX_SSP_EMPT)) //буфер передачи не пуст. ExchangeErr |= ADC_ERR_MSK; //установить флаг ошибки } else //обмен закончен прочитать буфер. { Input.ArrayIn[0] = LPC_SSP0->DR; //чтениеThermo2 Input.ArrayIn[1] = LPC_SSP0->DR; //чтение Thermo1 Input.ArrayIn[2] = LPC_SSP0->DR; //чтение HF_out while (LPC_SSP0->SR & RX_SSP_notEMPT) //если буфер SPI не пуст. Dummy = LPC_SSP0->DR; //очистить буфер. } } /***************************************************************************** ** Function name: DAC_Output ** ** Descriptions: Output data to intrnal DAC ** ** parameters: output - code for output ** Returned value: None ** *****************************************************************************/ void DAC_O456utput(int output) { // LPC_DAC->CR = (output<<6); return; } /****************************************************************************** ** Function name: G_Photo_Init ** ** Descriptions: Initialization of exchange with digital potentiometers ** ** parameters: None ** Returned value: None ** ******************************************************************************/ /****************************************************************************** ** Function name: DAC_ADC_Exchange_Init ** ** Descriptions: Initialization of data exchange with DACs and ADCs ** ** parameters: None ** Returned value: None ** ******************************************************************************/ /***************************************************************************** ** Function name: DACInit ** ** Descriptions: initialize DAC channel ** ** parameters: None ** Returned value: None ** *****************************************************************************/ void DACInit( void ) { /* setup the related pin to DAC output */ LPC_PINCON->PINSEL1 |= 0x00200000; /* установить p0.26 как выход ЦАП */ // LPC_GPIO0->FIODIR |= (1<<26); LPC_DAC->CNTVAL = 0; // ккаието параметры LPC_DAC->CTRL = 0; // для ДМА return; } /****************************************************************************** ** Function name: Out_G_photo ** ** Descriptions: Start of potentiometer data writing process ** ** parameters: pointer to gain factors ** Returned value: None ** ******************************************************************************/ void Out_G_photo(uint32_t Ph_A, uint32_t Ph_B) { I2CMasterBuffer[2] = 255-Ph_A;// запись в буфер I2C мастера данных с А канала фото датчика.(уточнить) I2CMasterBuffer[5] = 255-Ph_B;// запись в буфер I2C мастера данных с В канала фото датчика.(уточнить) GyroP.Str.Gain_Sin = Ph_A; GyroP.Str.Gain_Cos = Ph_B; LPC_I2C0->CONSET = I2CONSET_STA; // установить старт флаг. I2CMasterState = I2C_BUSY; // установить флаг занятой шины. }