Dmitry Kovalev
/
LG2
fork
Fork of LG by
Diff: Command.h
- Revision:
- 0:8ad47e2b6f00
- Child:
- 21:bc8c1cec3da6
diff -r 000000000000 -r 8ad47e2b6f00 Command.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Command.h Sat Jan 30 13:00:39 2016 +0000 @@ -0,0 +1,47 @@ + extern unsigned int Err; + extern unsigned int ParamIn; + extern unsigned int Rate_Flag; +#define SOC_In 0xCC //e. attribute of command //r. ������� ������� +//#define SOC_Out 0xDD +#define BROADCAST_ADDRESS 0x1f //e. the broadcasting address ( shared for 3 GLD ) //r. ����������������� ����� (����� ��� 3-� ���) + + +#define CMD_DELTA_PS 0xa000 //e. the code of the B_DeltaPS command //r. ��� ������� B_DeltaPS +#define CMD_DELTA_BINS 0xb000 //e. the code of the B_DeltaBINS command //r. ��� ������� B_DeltaBINS +#define CMD_DELTA_SF 0xb200 //e. the code of the B_DeltaSF command //r. ��� ������� B_DeltaSF +#define CMD_DEV_MODE 0xA500 //e. the code of the Device_Mode command //r. ��� ������� Device_Mode +#define CMD_BIT_MODE 0xA700 //e. the code of the B.I.T. command //r. ��� ������� B.I.T.(������������ ������������) +#define CMD_RATE 0x0000 //e. the code of the Rate command //r. ��� ������� Rate +#define CMD_DELTA 0x0f00 //e. the code of the Delta command //r. ��� ������� Delta +#define CMD_D_PERIOD_W 0xf000 //e. the code of the D_Period_W command //r. ��� ������� D_Period_W + +#define CMD_MAINT 0x0099 //e. the code of the Maintenance mode command //r. ��� ������� Maintenance mode + +#define SUBCMD_M_STIMUL 0x0a00 //e. the code of the Stimul command //r. ��� ������� Stimul +#define SUBCMD_M_RESET 0x8000 //e. software device reset(restart) //r. ����������� ����� (�������) ������� +#define SUBCMD_M_CLEAR 0xda00 //e. reset of the register of errors of line 485 //r. ������� �������� ������ ����� 485 +#define SUBCMD_M_MIRR 0xda01 //e. return previous contents of the receiver buffer //r. ������� ����������� ����������� ������ ��������� +#define SUBCMD_M_LDPAR_F 0xda02 //e. load GLD parameters from Flash-memory //r. ��������� ��������� ��� �� ����-������ +#define SUBCMD_M_LDPAR_D 0xda03 //e. set GLD parameters by procedure of initialization //r. ���������� ��������� ��� ���������� ������������� +#define SUBCMD_M_START 0xda04 //e. switch on the GLD //r. �������� ��� +#define SUBCMD_M_STOP 0xda40 //e. switch off the GLD //r. ��������� ��� +#define SUBCMD_M_PULSE 0xda0a //e. generation of the light-up pulse //r. ��������� �������� ������� + +#define SUBCMD_M_CTL_R 0xd900 //e. reading the control register of the device //r. ������ �������� ���������� ���������� +#define SUBCMD_M_CTL_M 0xd800 //e. modification of bit of the control register //r. ����������� ���� �������� ���������� +#define SUBCMD_M_RATE 0xdd00 //e. delivery of a stack of parameters M_Rate (Rate2, Rate3) //r. ������ ������ ���������� M_Rate (Rate2, Rate3) + +#define SUBCMD_M_TMP_W 0xe000 //e. writing to the AD7714 circuit (temperature sensors) //r. ������ � ����� AD7714 (���������� �����������) +#define SUBCMD_M_TMP_R 0xe100 //e. reading from the AD7714 circuit (temperature sensors) //r. ������ �� ���� AD7714 (���������� �����������) +#define SUBCMD_M_E5R_W 0xe200 //e. writing to the register of a mode of the Elio5 card //r. ������ � ������� ������ ����� Elio5 +#define SUBCMD_M_ADC_R 0xe300 //e. reading data from the ADC of the Elio5 card //r. ������ ������ �� ��� ����� Elio5 +#define SUBCMD_M_VIB_W 0xe400 //e. loading of the oscillation period of the dither drive //r. �������� ������� ��������� ������������ +#define SUBCMD_M_CNT_R 0xe500 //e. reading data from the counters of the Elio5 card //r. ������ ������ �� ��������� ����� Elio5 +#define SUBCMD_M_GPH_W 0xe600 //e. loading gain factors of photodetector channels //r. �������� ������������� �������� ������� ������������� +#define SUBCMD_M_FLG_R 0xe700 //e. reading data from the register of input flags //r. ������ ������ �� �������� ������� ������ +#define SUBCMD_M_PARAM_W 0xe800 //e. writing working parameter to the data memory //r. ������ �������� ��������� � ������ ������ +#define SUBCMD_M_PARAM_R 0xe900 //e. reading working parameter of the GLD from the data memory //r. ������ �������� ��������� GLD �� ������ ������ +#define SUBCMD_M_E5RA_W 0xea00 //e. writing in 1st additional (A) register of a mode of the Elio5 card //r. ������ � 1-�� �������������� (�) ������� ������ ����� Elio5 +void Read_CMD(void); +unsigned int Check(char *c, unsigned int Count); +void CMD_Rate(void);