Dmitry Kovalev / Mbed 2 deprecated LG2

fork

Dependencies:   mbed

Fork of LG by igor Apu

Diff: el_lin.h

Revision:
21:bc8c1cec3da6
Parent:
0:8ad47e2b6f00
Child:
91:a2bb81eaa183
--- a/el_lin.h	Tue Feb 02 17:14:25 2016 +0000
+++ b/el_lin.h	Wed Feb 03 07:19:30 2016 +0000
@@ -1,40 +1,39 @@
-
 /**--------------File Info---------------------------------------------------------------------------------
 ** File name:           el_lin.h
 ** Last modified Date:  2011-08-22
 ** Last Version:        V1.00
-** Descriptions:        
+** Descriptions:
 **
 **--------------------------------------------------------------------------------------------------------
 ** Created by:          Electrooptika incor.
 ** Created date:        2011-08-22
 ** Version:             V1.00
 **
-**--------------------------------------------------------------------------------------------------------       
+**--------------------------------------------------------------------------------------------------------
 *********************************************************************************************************/
-#ifndef __DMA_H 
+#ifndef __DMA_H
 #define __DMA_H
 
 
 
-#define  STRT_ERR        0x0080          //e. error of the start bit //r. îøèáêà ñòàðò-áèòà  
-#define  STOP_ERR        0x0040          //e. error of the stop bit //r. îøèáêà ñòîï-áèòà  
-#define  SIZE_ERR        0x0004          //e. size of the received data packet mismatches the agreement //r. ðàçìåð ïðèíÿòîãî ïàêåòà íå ñîîòâåòñòâóåò ñîãëàøåíèþ  
-#define  LCC_ERR         0x0002          //e. checksum has not coincided //r. íå ñîâïàëà êîíòðîëüíàÿ ñóììà
-#define  NO_CMD_ERR      0x0100          //e. in the received packet there is no attribute of command //r. â ïðèíÿòîì ïàêåòå íåò ïðèçíàêà êîìàíäû  
-#define  CODE_ERR        0x0200          //e. unknown code of a command //r. íåèçâåñòíûé êîä êîìàíäû  
-#define  MODE_ERR        0x0400          //e. code of a command mismatches a current mode //r. êîä êîìàíäû íå ñîîòâåòñòâóåò òåêóùåìó ðåæèìó  
-#define  PARAM_ERR       0x0800          //e. parameters of a command was set incorrectly //r. íåâåðíî çàäàííûå ïàðàìåòðû êîìàíäû  
-#define  MAXSIZE_ERR     0x1000          //e. receiver buffer overflow //r. ïåðåïîëíåíèå áóôåðà ïðèåìíèêà  
-#define  ADDR_ERR        0x2000          //e. incorrect address of the device //r. íåâåðíûé àäðåñ óñòðîéñòâà  
-#define  READ_ERR        0x4000          //e. stop of link because of untimely data read //r. îñòàíîâ ñâÿçè íåñâîåâðåìåííûì ÷òåíèåì äàííûõ  
-#define  WASQ_ERR        0x8000          //e. error of waiting of authentic answer //r. îøèáêà îæèäàíèÿ äîñòîâåðíîãî îòâåòà  
+#define  STRT_ERR        0x0080          //e. error of the start bit //r. ошибка старт-бита  
+#define  STOP_ERR        0x0040          //e. error of the stop bit //r. ошибка стоп-бита  
+#define  SIZE_ERR        0x0004          //e. size of the received data packet mismatches the agreement //r. размер принятого пакета не соответствует соглашению  
+#define  LCC_ERR         0x0002          //e. checksum has not coincided //r. не совпала контрольная сумма
+#define  NO_CMD_ERR      0x0100          //e. in the received packet there is no attribute of command //r. в принятом пакете нет признака команды  
+#define  CODE_ERR        0x0200          //e. unknown code of a command //r. неизвестный код команды  
+#define  MODE_ERR        0x0400          //e. code of a command mismatches a current mode //r. код команды не соответствует текущему режиму  
+#define  PARAM_ERR       0x0800          //e. parameters of a command was set incorrectly //r. неверно заданные параметры команды  
+#define  MAXSIZE_ERR     0x1000          //e. receiver buffer overflow //r. переполнение буфера приемника  
+#define  ADDR_ERR        0x2000          //e. incorrect address of the device //r. неверный адрес устройства  
+#define  READ_ERR        0x4000          //e. stop of link because of untimely data read //r. останов связи несвоевременным чтением данных  
+#define  WASQ_ERR        0x8000          //e. error of waiting of authentic answer //r. ошибка ожидания достоверного ответа  
 
-#define  Trm_En_Rd       0x0080          //e. a mask of permission/readiness of transmitter of the 2 line //r. ìàñêà ðàçðåøåíèÿ/ãîòîâíîñòè ïåðåäàò÷èêà ëèíèè 2  
-#define  Rcv_Rdy         0x0040          //e. a mask of the readiness bit of the receiver //r. ìàñêà áèòà ãîòîâíîñòè ïðèåìíèêà  
-#define  Rcv_Ferr        0x0020          //e. a mask of the "format error" bit //r. ìàñêà áèòà "îøèáêà ôîðìàòà" 
-#define  Rcv_Tout        0x0010          //e. a mask of the "time-out" bit //r. ìàñêà áèòà "òàéì-àóò" 
-#define  Rcv_Rful        0x0008          //e. a mask of the "stack is full" bit //r. ìàñêà áèòà "ñòåê ïîëîí"
+#define  Trm_En_Rd       0x0080          //e. a mask of permission/readiness of transmitter of the 2 line //r. маска разрешения/готовности передатчика линии 2  
+#define  Rcv_Rdy         0x0040          //e. a mask of the readiness bit of the receiver //r. маска бита готовности приемника  
+#define  Rcv_Ferr        0x0020          //e. a mask of the "format error" bit //r. маска бита "ошибка формата" 
+#define  Rcv_Tout        0x0010          //e. a mask of the "time-out" bit //r. маска бита "тайм-аут" 
+#define  Rcv_Rful        0x0008          //e. a mask of the "stack is full" bit //r. маска бита "стек полон"
 
 
 #define FIFOs_En			0x00000001
@@ -154,7 +153,7 @@
 #define	DstFixed			0x00000000
 
 #define TCIntEnabl			0x80000000
-#define TCIntDisabl			0x00000000	
+#define TCIntDisabl			0x00000000
 
 #define DMAChannelEn		0x00000001
 #define DMAChannelDis		0x00000000
@@ -198,7 +197,7 @@
 extern unsigned int  line_sts;
 extern 			int  rx_buf_copy;
 extern			char zeros;
-extern unsigned int SystemCoreClock; 
+extern unsigned int SystemCoreClock;
 
 extern void DMA_Init(void);
 extern void transm_DAT(void);
@@ -210,8 +209,7 @@
 extern int UART1_SendByte(int);
 extern void UART_SwitchSpeed(unsigned);
 extern void UART_DMA_Init(void);
-extern void SystemCoreClockUpdate (void); 
+extern void SystemCoreClockUpdate (void);
 
 #endif /* end __DMA_H */
 
-