Example program for CN0535-FMCZ.
Dependencies: platform_drivers AD77681
Diff: README.txt
- Revision:
- 1:f3b5e79a8488
- Parent:
- 0:ae894be1131f
diff -r ae894be1131f -r f3b5e79a8488 README.txt --- a/README.txt Thu Mar 04 15:34:19 2021 +0000 +++ b/README.txt Mon Mar 15 07:12:29 2021 +0000 @@ -1,27 +1,35 @@ Evaluation Boards/Products Supported ------------------------------------ -EVAL-AD1234 (AD1234) -EVAL-AD1256 (AD1256) -<< add more here >> +EVAL-CN0535-FMCZ +AD7768-1 +LTC6373 +ADA4945-1 Overview -------- -These code files provide drivers to interface with AD1234 and communicate with -EVAL-AD1234 board. This code was developed and tested on SDP-K1 controller board +These code files provide drivers to interface with AD7768-1 and communicate with +EVAL-CN0535-FMCZ board. This code was developed and tested on SDP-K1 controller board https://os.mbed.com/platforms/SDP_K1/. -Product details: https://www.analog.com/en/products/ad1234.html -Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD1234.html +Product details: https://www.analog.com/en/design-center/reference-designs/circuits-from-the-lab/cn0535.html +Eval board details: https:https://wiki.analog.com/resources/eval/user-guides/circuits-from-the-lab/cn0535 Hardware Setup -------------- -Required: SDP-K1, EVAL-AD1234, USB cable, 12 V power supply, 60 MHz external -clock supply. -Plug in the EVAL-AD124 board on SDP-K1 board (or any other Mbed enabled -controller board) using the SDP connector and screws. +Required: SDP-K1, EVAL-CN0535-FMCZ, USB cable, 6V wall wart power supply, on-board +16.384MHz XO (Standard) HCMOS, SMD Arduino Headers and R0603 0 Ohm resistors. + +Install the SMD Arduino headers and the Oscillator on the EVAL-CN0535-FMCZ board. +Install 0 Ohms resitors on R5, R6, R7, R2 and R38. +Set S2 position 4 to High (FDA_EN) +Plug in the EVAL-CN0535-FMCZ board on SDP-K1 board using the Arduino pin header. +Connect the 6V wall wart power supply on P15 of SDP-K1 board Connect SDP-K1 board to the PC using the USB cable. +A detailed user guide on how to use EVAL-CN0535-FMCZ with SDP-K1 board on Mbed platform is available +here: https://wiki.analog.com/resources/eval/user-guides/circuits-from-the-lab/cn0535/sdp-k1 + How to Get Started ------------------