TextLCD - Change config file suit LCD used

Users » Khayhen » Code » TextLCD

Change config file suit LCD used

TextLCD.h@41:111ca62e8a59, 2015-11-06 (annotated)

Committer:: wim
Date:: Fri Nov 06 18:59:27 2015 +0000
Revision:: 41:111ca62e8a59
Parent:: 40:d3496c3ea301

Added setFont() support (for SSD1803, US2066, ST7070) and support for UTF-8 code (Cyrillic language), added SPLC792A controller.

Who changed what in which revision?

User	Revision	Line number	New contents of line
wim	37:ce348c002929	1	/* mbed TextLCD Library, for LCDs based on HD44780 controllers
simon	6:e4cb7ddee0d3	2	* Copyright (c) 2007-2010, sford, http://mbed.org
wim	13:24506ba22480	3	* 2013, v01: WH, Added LCD types, fixed LCD address issues, added Cursor and UDCs
wim	15:b70ebfffb258	4	* 2013, v02: WH, Added I2C and SPI bus interfaces
wim	15:b70ebfffb258	5	* 2013, v03: WH, Added support for LCD40x4 which uses 2 controllers
wim	17:652ab113bc2e	6	* 2013, v04: WH, Added support for Display On/Off, improved 4bit bootprocess
wim	18:bd65dc10f27f	7	* 2013, v05: WH, Added support for 8x2B, added some UDCs
wim	19:c747b9e2e7b8	8	* 2013, v06: WH, Added support for devices that use internal DC/DC converters
wim	20:e0da005a777f	9	* 2013, v07: WH, Added support for backlight and include portdefinitions for LCD2004 Module from DFROBOT
wim	21:9eb628d9e164	10	* 2014, v08: WH, Refactored in Base and Derived Classes to deal with mbed lib change regarding 'NC' defined DigitalOut pins
wim	25:6162b31128c9	11	* 2014, v09: WH/EO, Added Class for Native SPI controllers such as ST7032
wim	26:bd897a001012	12	* 2014, v10: WH, Added Class for Native I2C controllers such as ST7032i, Added support for MCP23008 I2C portexpander, Added support for Adafruit module
wim	30:033048611c01	13	* 2014, v11: WH, Added support for native I2C controllers such as PCF21XX, Improved the _initCtrl() method to deal with differences between all supported controllers
wim	32:59c4b8f648d4	14	* 2014, v12: WH, Added support for native I2C controller PCF2119 and native I2C/SPI controllers SSD1803, ST7036, added setContrast method (by JH1PJL) for supported devices (eg ST7032i)
wim	34:e5a0dcb43ecc	15	* 2014, v13: WH, Added support for controllers US2066/SSD1311 (OLED), added setUDCBlink() method for supported devices (eg SSD1803), fixed issue in setPower()
wim	34:e5a0dcb43ecc	16	* 2014, v14: WH, Added support for PT6314 (VFD), added setOrient() method for supported devices (eg SSD1803, US2066), added Double Height lines for supported devices,
wim	34:e5a0dcb43ecc	17	* added 16 UDCs for supported devices (eg PCF2103), moved UDC defines to TextLCD_UDC file, added TextLCD_Config.h for feature and footprint settings.
wim	35:311be6444a39	18	* 2014, v15: WH, Added AC780 support, added I2C expander modules, fixed setBacklight() for inverted logic modules. Fixed bug in LCD_SPI_N define
wim	36:9f5f86dfd44a	19	* 2014, v16: WH, Added ST7070 and KS0073 support, added setIcon(), clrIcon() and setInvert() method for supported devices
wim	37:ce348c002929	20	* 2015, v17: WH, Clean up low-level _writeCommand() and _writeData(), Added support for alternative fonttables (eg PCF21XX), Added ST7066_ACM controller for ACM1602 module
wim	38:cbe275b0b647	21	* 2015, v18: WH, Performance improvement I2C portexpander
wim	39:e9c2319de9c5	22	* 2015, v19: WH, Added 10x2D and 10x4D type for SSD1803
wim	39:e9c2319de9c5	23	* 2015, v20: WH, Fixed occasional Init fail caused by insufficient wait time after ReturnHome command (0x02), Added defines to reduce memory footprint (eg LCD_ICON),
wim	40:d3496c3ea301	24	* Fixed and Added more fonttable support for PCF2119R_3V3, Added HD66712 controller.
wim	41:111ca62e8a59	25	* 2015, v21: WH, Added LCD32x2 defines and code, Fixed LCD12x4D enum, Added font enums, Added SPLC792A controller,
wim	41:111ca62e8a59	26	* Added UTF8_2_LCD decode for Cyrilic font (By Andriy Ribalko). Added setFont()
simon	1:ac48b187213c	27	*
simon	1:ac48b187213c	28	* Permission is hereby granted, free of charge, to any person obtaining a copy
simon	1:ac48b187213c	29	* of this software and associated documentation files (the "Software"), to deal
simon	1:ac48b187213c	30	* in the Software without restriction, including without limitation the rights
simon	1:ac48b187213c	31	* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
simon	1:ac48b187213c	32	* copies of the Software, and to permit persons to whom the Software is
simon	1:ac48b187213c	33	* furnished to do so, subject to the following conditions:
simon	2:227356c7d12c	34	*
simon	1:ac48b187213c	35	* The above copyright notice and this permission notice shall be included in
simon	1:ac48b187213c	36	* all copies or substantial portions of the Software.
simon	2:227356c7d12c	37	*
simon	1:ac48b187213c	38	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
simon	1:ac48b187213c	39	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
simon	1:ac48b187213c	40	* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
simon	1:ac48b187213c	41	* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
simon	1:ac48b187213c	42	* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
simon	1:ac48b187213c	43	* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
simon	1:ac48b187213c	44	* THE SOFTWARE.
simon	1:ac48b187213c	45	*/
simon	1:ac48b187213c	46
simon	1:ac48b187213c	47	#ifndef MBED_TEXTLCD_H
simon	1:ac48b187213c	48	#define MBED_TEXTLCD_H
simon	1:ac48b187213c	49
simon	1:ac48b187213c	50	#include "mbed.h"
wim	34:e5a0dcb43ecc	51	#include "TextLCD_Config.h"
wim	34:e5a0dcb43ecc	52	#include "TextLCD_UDC.h"
simon	2:227356c7d12c	53
simon	5:a53b3e2d6f1e	54	/** A TextLCD interface for driving 4-bit HD44780-based LCDs
simon	2:227356c7d12c	55	*
wim	34:e5a0dcb43ecc	56	* Currently supports 8x1, 8x2, 12x3, 12x4, 16x1, 16x2, 16x3, 16x4, 20x2, 20x4, 24x1, 24x2, 24x4, 40x2 and 40x4 panels.
wim	27:22d5086f6ba6	57	* Interface options include direct mbed pins, I2C portexpander (PCF8474/PCF8574A or MCP23008) or SPI bus shiftregister (74595).
wim	34:e5a0dcb43ecc	58	* Supports some controllers with native I2C or SPI interface. Supports some controllers that provide internal DC/DC converters for VLCD or VLED.
wim	34:e5a0dcb43ecc	59	* Supports some controllers that feature programmable contrast control, powerdown, blinking UDCs and/or top/down orientation modes.
simon	2:227356c7d12c	60	*
simon	2:227356c7d12c	61	* @code
simon	2:227356c7d12c	62	* #include "mbed.h"
simon	2:227356c7d12c	63	* #include "TextLCD.h"
simon	5:a53b3e2d6f1e	64	*
wim	16:c276b75e6585	65	* // I2C Communication
wim	16:c276b75e6585	66	* I2C i2c_lcd(p28,p27); // SDA, SCL
wim	16:c276b75e6585	67	*
wim	16:c276b75e6585	68	* // SPI Communication
wim	16:c276b75e6585	69	* SPI spi_lcd(p5, NC, p7); // MOSI, MISO, SCLK
wim	16:c276b75e6585	70	*
wim	22:35742ec80c24	71	* //TextLCD lcd(p15, p16, p17, p18, p19, p20); // RS, E, D4-D7, LCDType=LCD16x2, BL=NC, E2=NC, LCDTCtrl=HD44780
wim	28:30fa94f7341c	72	* //TextLCD_SPI lcd(&spi_lcd, p8, TextLCD::LCD40x4); // SPI bus, 74595 expander, CS pin, LCD Type
wim	34:e5a0dcb43ecc	73	* TextLCD_I2C lcd(&i2c_lcd, 0x42, TextLCD::LCD20x4); // I2C bus, PCF8574 Slaveaddress, LCD Type
wim	34:e5a0dcb43ecc	74	* //TextLCD_I2C lcd(&i2c_lcd, 0x42, TextLCD::LCD16x2, TextLCD::WS0010); // I2C bus, PCF8574 Slaveaddress, LCD Type, Device Type (OLED)
wim	27:22d5086f6ba6	75	* //TextLCD_SPI_N lcd(&spi_lcd, p8, p9); // SPI bus, CS pin, RS pin, LCDType=LCD16x2, BL=NC, LCDTCtrl=ST7032_3V3
wim	34:e5a0dcb43ecc	76	* //TextLCD_I2C_N lcd(&i2c_lcd, ST7032_SA, TextLCD::LCD16x2, NC, TextLCD::ST7032_3V3); // I2C bus, Slaveaddress, LCD Type, BL=NC, LCDTCtrl=ST7032_3V3
wim	34:e5a0dcb43ecc	77	* //TextLCD_SPI_N_3_24 lcd(&spi_lcd, p8, TextLCD::LCD20x4D, NC, TextLCD::SSD1803_3V3); // SPI bus, CS pin, LCDType=LCD20x4D, BL=NC, LCDTCtrl=SSD1803
wim	34:e5a0dcb43ecc	78	* //TextLCD_SPI_N_3_24 lcd(&spi_lcd, p8, TextLCD::LCD20x2, NC, TextLCD::US2066_3V3); // SPI bus, CS pin, LCDType=LCD20x2, BL=NC, LCDTCtrl=US2066 (OLED)
wim	34:e5a0dcb43ecc	79	*
simon	2:227356c7d12c	80	* int main() {
wim	16:c276b75e6585	81	* lcd.printf("Hello World!\n");
simon	2:227356c7d12c	82	* }
simon	2:227356c7d12c	83	* @endcode
simon	2:227356c7d12c	84	*/
wim	8:03116f75b66e	85
wim	34:e5a0dcb43ecc	86	//The TextLCD_Config.h file selects hardware interface options to reduce memory footprint
wim	34:e5a0dcb43ecc	87	//and provides Pin Defines for I2C PCF8574/PCF8574A or MCP23008 and SPI 74595 bus expander interfaces.
wim	34:e5a0dcb43ecc	88	//The LCD and serial portexpanders should be wired accordingly.
wim	32:59c4b8f648d4	89
wim	30:033048611c01	90	/* LCD Type information on Rows, Columns and Variant. This information is encoded in
wim	30:033048611c01	91	* an int and used for the LCDType enumerators in order to simplify code maintenance */
wim	41:111ca62e8a59	92
wim	41:111ca62e8a59	93	// Type ID encoded in b7..b0
wim	41:111ca62e8a59	94	#define LCD_T_ID_MSK 0x000000FF
wim	41:111ca62e8a59	95	#define LCD_T_ID_SHFT 0
wim	41:111ca62e8a59	96
wim	41:111ca62e8a59	97	// Columns encoded in b15..b8
wim	41:111ca62e8a59	98	#define LCD_T_COL_MSK 0x0000FF00
wim	41:111ca62e8a59	99	#define LCD_T_COL_SHFT 8
wim	41:111ca62e8a59	100	#define LCD_T_C6 0x00000600
wim	41:111ca62e8a59	101	#define LCD_T_C8 0x00000800
wim	41:111ca62e8a59	102	#define LCD_T_C10 0x00000A00
wim	41:111ca62e8a59	103	#define LCD_T_C12 0x00000C00
wim	41:111ca62e8a59	104	#define LCD_T_C16 0x00001000
wim	41:111ca62e8a59	105	#define LCD_T_C20 0x00001400
wim	41:111ca62e8a59	106	#define LCD_T_C24 0x00001800
wim	41:111ca62e8a59	107	#define LCD_T_C32 0x00002000
wim	41:111ca62e8a59	108	#define LCD_T_C40 0x00002800
wim	41:111ca62e8a59	109	//#define LCD_T_C52 0x00003400
wim	30:033048611c01	110
wim	41:111ca62e8a59	111	// Rows encoded in b23..b16
wim	41:111ca62e8a59	112	#define LCD_T_ROW_MSK 0x00FF0000
wim	41:111ca62e8a59	113	#define LCD_T_ROW_SHFT 16
wim	41:111ca62e8a59	114	#define LCD_T_R1 0x00010000
wim	41:111ca62e8a59	115	#define LCD_T_R2 0x00020000
wim	41:111ca62e8a59	116	#define LCD_T_R3 0x00030000
wim	41:111ca62e8a59	117	#define LCD_T_R4 0x00040000
wim	41:111ca62e8a59	118	#define LCD_T_R6 0x00060000
wim	30:033048611c01	119
wim	41:111ca62e8a59	120	// Addressing mode encoded in b27..b24
wim	41:111ca62e8a59	121	#define LCD_T_ADR_MSK 0x0F000000
wim	41:111ca62e8a59	122	#define LCD_T_ADR_SHFT 24
wim	32:59c4b8f648d4	123	#define LCD_T_A 0x00000000 /Mode A Default 1, 2 or 4 line display /
wim	41:111ca62e8a59	124	#define LCD_T_B 0x01000000 /Mode B, Alternate 8x2 (actually 16x1 display) /
wim	41:111ca62e8a59	125	#define LCD_T_C 0x02000000 /Mode C, Alternate 16x1 (actually 8x2 display) /
wim	41:111ca62e8a59	126	#define LCD_T_D 0x03000000 /Mode D, Alternate 3 or 4 line display (12x4, 20x4, 24x4) /
wim	41:111ca62e8a59	127	#define LCD_T_D1 0x04000000 /Mode D1, Alternate 3 out of 4 line display (12x3, 20x3, 24x3) /
wim	41:111ca62e8a59	128	#define LCD_T_E 0x05000000 /Mode E, 40x4 display (actually two 40x2) /
wim	41:111ca62e8a59	129	#define LCD_T_F 0x06000000 /Mode F, 16x3 display (actually 24x2) /
wim	41:111ca62e8a59	130	#define LCD_T_G 0x07000000 /Mode G, 16x3 display /
wim	30:033048611c01	131
wim	30:033048611c01	132	/* LCD Ctrl information on interface support and features. This information is encoded in
wim	30:033048611c01	133	* an int and used for the LCDCtrl enumerators in order to simplify code maintenance */
wim	30:033048611c01	134	// Interface encoded in b31..b24
wim	30:033048611c01	135	#define LCD_C_BUS_MSK 0xFF000000
wim	41:111ca62e8a59	136	#define LCD_C_BUS_SHFT 24
wim	32:59c4b8f648d4	137	#define LCD_C_PAR 0x01000000 /Parallel 4 or 8 bit data, E pin, RS pin, RW=GND /
wim	36:9f5f86dfd44a	138	#define LCD_C_SPI3_8 0x02000000 /SPI 3 line (MOSI, SCL, CS pins), 8 bits (Count Command initiates Data transfer) /
wim	36:9f5f86dfd44a	139	#define LCD_C_SPI3_9 0x04000000 /SPI 3 line (MOSI, SCL, CS pins), 9 bits (RS + 8 Data) /
wim	36:9f5f86dfd44a	140	#define LCD_C_SPI3_10 0x08000000 /SPI 3 line (MOSI, SCL, CS pins), 10 bits (RS, RW + 8 Data) /
wim	36:9f5f86dfd44a	141	#define LCD_C_SPI3_16 0x10000000 /SPI 3 line (MOSI, SCL, CS pins), 16 bits (RS, RW + 8 Data) /
wim	36:9f5f86dfd44a	142	#define LCD_C_SPI3_24 0x20000000 /SPI 3 line (MOSI, SCL, CS pins), 24 bits (RS, RW + 8 Data) /
wim	36:9f5f86dfd44a	143	#define LCD_C_SPI4 0x40000000 /SPI 4 line (MOSI, SCL, CS, RS pin), RS pin + 8 Data /
wim	36:9f5f86dfd44a	144	#define LCD_C_I2C 0x80000000 /I2C (SDA, SCL pin), 8 control bits (Co, RS, RW) + 8 Data /
wim	30:033048611c01	145	// Features encoded in b23..b16
wim	30:033048611c01	146	#define LCD_C_FTR_MSK 0x00FF0000
wim	41:111ca62e8a59	147	#define LCD_C_FTR_SHFT 16
wim	30:033048611c01	148	#define LCD_C_BST 0x00010000 /Booster /
wim	32:59c4b8f648d4	149	#define LCD_C_CTR 0x00020000 /Contrast Control /
wim	32:59c4b8f648d4	150	#define LCD_C_ICN 0x00040000 /Icons /
wim	32:59c4b8f648d4	151	#define LCD_C_PDN 0x00080000 /Power Down /
wim	37:ce348c002929	152	// Fonttable encoded in b15..b12
wim	41:111ca62e8a59	153	#define LCD_C_FNT_MSK 0x0000F000
wim	41:111ca62e8a59	154	#define LCD_C_FNT_SHFT 12
wim	41:111ca62e8a59	155	#define LCD_C_F0 0x00000000 /Default HD44780 UK/JAP /
wim	41:111ca62e8a59	156	#define LCD_C_FC 0x00001000 /PCF21xxC /
wim	41:111ca62e8a59	157	#define LCD_C_FR 0x00002000 /PCF21XXR /
wim	41:111ca62e8a59	158	#define LCD_C_FK 0x00003000 /PCF21XXK /
wim	41:111ca62e8a59	159	#define LCD_C_FRA 0x00004000 /SSD1803 ROM_A UK/EU /
wim	41:111ca62e8a59	160	#define LCD_C_FRB 0x00005000 /SSD1803 ROM_B UK/Cyrillic /
wim	41:111ca62e8a59	161	#define LCD_C_FRC 0x00006000 /SSD1803 ROM_C UK/JAP /
wim	41:111ca62e8a59	162	#define LCD_C_FD 0x00007000 /SPLC780D EU/Cyrillic /
wim	41:111ca62e8a59	163	#define LCD_C_FT 0x00008000 /ST7066-0T EU/Cyrillic /
wim	41:111ca62e8a59	164
wim	41:111ca62e8a59	165	// Type ID encoded in b7..b0
wim	41:111ca62e8a59	166	#define LCD_C_ID_MSK 0x000000FF
wim	41:111ca62e8a59	167	#define LCD_C_ID_SHFT 0
wim	32:59c4b8f648d4	168
wim	11:9ec02df863a1	169	/** A TextLCD interface for driving 4-bit HD44780-based LCDs
wim	11:9ec02df863a1	170	*
wim	33:900a94bc7585	171	* @brief Currently supports 8x1, 8x2, 12x2, 12x3, 12x4, 16x1, 16x2, 16x3, 16x4, 20x2, 20x4, 24x2, 24x4, 40x2 and 40x4 panels
wim	37:ce348c002929	172	* Interface options include direct mbed pins, I2C portexpander (PCF8474/PCF8574A or MCP23008) or
wim	37:ce348c002929	173	* SPI bus shiftregister (74595) or native I2C or SPI interfaces for some supported devices.
wim	11:9ec02df863a1	174	*/
wim	21:9eb628d9e164	175	class TextLCD_Base : public Stream {
wim	37:ce348c002929	176	//class TextLCD_Base {
wim	35:311be6444a39	177
wim	37:ce348c002929	178	//Unfortunately the following #define selection breaks Doxygen !!!
wim	37:ce348c002929	179	//Add it manually when you want to disable the Stream inheritance
wim	35:311be6444a39	180	//#if (LCD_PRINTF == 1)
wim	35:311be6444a39	181	//class TextLCD_Base : public Stream {
wim	35:311be6444a39	182	//#else
wim	37:ce348c002929	183	//class TextLCD_Base {
wim	35:311be6444a39	184	//#endif
wim	35:311be6444a39	185
simon	1:ac48b187213c	186	public:
simon	1:ac48b187213c	187
simon	2:227356c7d12c	188	/** LCD panel format */
wim	33:900a94bc7585	189	// The commented out types exist but have not yet been tested with the library
simon	1:ac48b187213c	190	enum LCDType {
wim	39:e9c2319de9c5	191	// LCD6x1 = (LCD_T_A \| LCD_T_C6 \| LCD_T_R1), /*< 6x1 LCD panel /
wim	39:e9c2319de9c5	192	// LCD6x2 = (LCD_T_A \| LCD_T_C6 \| LCD_T_R2), /*< 6x2 LCD panel /
wim	39:e9c2319de9c5	193	LCD8x1 = (LCD_T_A \| LCD_T_C8 \| LCD_T_R1), /*< 8x1 LCD panel /
wim	39:e9c2319de9c5	194	LCD8x2 = (LCD_T_A \| LCD_T_C8 \| LCD_T_R2), /*< 8x2 LCD panel /
wim	41:111ca62e8a59	195	LCD8x2B = (LCD_T_B \| LCD_T_C8 \| LCD_T_R2), /*< 8x2 LCD panel (actually 16x1) /
wim	39:e9c2319de9c5	196	// LCD10x2D = (LCD_T_D \| LCD_T_C10 \| LCD_T_R2), /*< 10x2 LCD panel, special mode SSD1803, 4-line but double height /
wim	39:e9c2319de9c5	197	LCD10x4D = (LCD_T_D \| LCD_T_C10 \| LCD_T_R4), /*< 10x4 LCD panel, special mode SSD1803 /
wim	39:e9c2319de9c5	198	LCD12x1 = (LCD_T_A \| LCD_T_C12 \| LCD_T_R1), /*< 12x1 LCD panel /
wim	39:e9c2319de9c5	199	LCD12x2 = (LCD_T_A \| LCD_T_C12 \| LCD_T_R2), /*< 12x2 LCD panel /
wim	39:e9c2319de9c5	200	LCD12x3D = (LCD_T_D \| LCD_T_C12 \| LCD_T_R3), /*< 12x3 LCD panel, special mode PCF21XX, KS0073 /
wim	39:e9c2319de9c5	201	LCD12x3D1 = (LCD_T_D1 \| LCD_T_C12 \| LCD_T_R3), /*< 12x3 LCD panel, special mode PCF21XX, KS0073 /
wim	39:e9c2319de9c5	202	// LCD12x3G = (LCD_T_G \| LCD_T_C12 \| LCD_T_R3), /*< 12x3 LCD panel, special mode ST7036 /
wim	39:e9c2319de9c5	203	LCD12x4 = (LCD_T_A \| LCD_T_C12 \| LCD_T_R4), /*< 12x4 LCD panel /
wim	41:111ca62e8a59	204	LCD12x4D = (LCD_T_D \| LCD_T_C12 \| LCD_T_R4), /*< 12x4 LCD panel, special mode PCF21XX, KS0073 /
wim	39:e9c2319de9c5	205	LCD16x1 = (LCD_T_A \| LCD_T_C16 \| LCD_T_R1), /*< 16x1 LCD panel /
wim	39:e9c2319de9c5	206	LCD16x1C = (LCD_T_C \| LCD_T_C16 \| LCD_T_R1), /*< 16x1 LCD panel (actually 8x2) /
wim	30:033048611c01	207	LCD16x2 = (LCD_T_A \| LCD_T_C16 \| LCD_T_R2), /*< 16x2 LCD panel (default) /
wim	30:033048611c01	208	// LCD16x2B = (LCD_T_B \| LCD_T_C16 \| LCD_T_R2), /*< 16x2 LCD panel, alternate addressing, wrong.. /
wim	39:e9c2319de9c5	209	LCD16x3D = (LCD_T_D \| LCD_T_C16 \| LCD_T_R3), /*< 16x3 LCD panel, special mode SSD1803 /
wim	39:e9c2319de9c5	210	// LCD16x3D1 = (LCD_T_D1 \| LCD_T_C16 \| LCD_T_R3), /*< 16x3 LCD panel, special mode SSD1803 /
wim	39:e9c2319de9c5	211	LCD16x3F = (LCD_T_F \| LCD_T_C16 \| LCD_T_R3), /*< 16x3 LCD panel (actually 24x2) /
wim	39:e9c2319de9c5	212	LCD16x3G = (LCD_T_G \| LCD_T_C16 \| LCD_T_R3), /*< 16x3 LCD panel, special mode ST7036 /
wim	39:e9c2319de9c5	213	LCD16x4 = (LCD_T_A \| LCD_T_C16 \| LCD_T_R4), /*< 16x4 LCD panel /
wim	39:e9c2319de9c5	214	// LCD16x4D = (LCD_T_D \| LCD_T_C16 \| LCD_T_R4), /*< 16x4 LCD panel, special mode SSD1803 /
wim	34:e5a0dcb43ecc	215	LCD20x1 = (LCD_T_A \| LCD_T_C20 \| LCD_T_R1), /*< 20x1 LCD panel /
wim	30:033048611c01	216	LCD20x2 = (LCD_T_A \| LCD_T_C20 \| LCD_T_R2), /*< 20x2 LCD panel /
wim	39:e9c2319de9c5	217	// LCD20x3 = (LCD_T_A \| LCD_T_C20 \| LCD_T_R3), /*< 20x3 LCD panel /
wim	41:111ca62e8a59	218	// LCD20x3D = (LCD_T_D \| LCD_T_C20 \| LCD_T_R3), /*< 20x3 LCD panel, special mode SSD1803, KS0073 /
wim	41:111ca62e8a59	219	// LCD20x3D1 = (LCD_T_D1 \| LCD_T_C20 \| LCD_T_R3), /*< 20x3 LCD panel, special mode SSD1803, KS0073 /
wim	30:033048611c01	220	LCD20x4 = (LCD_T_A \| LCD_T_C20 \| LCD_T_R4), /*< 20x4 LCD panel /
wim	41:111ca62e8a59	221	LCD20x4D = (LCD_T_D \| LCD_T_C20 \| LCD_T_R4), /*< 20x4 LCD panel, special mode SSD1803, KS0073 /
wim	39:e9c2319de9c5	222	// LCD20x6 = (LCD_T_E \| LCD_T_C20 \| LCD_T_R6), /*< 20x6 LCD panel, Two controller version /
wim	39:e9c2319de9c5	223	LCD24x1 = (LCD_T_A \| LCD_T_C24 \| LCD_T_R1), /*< 24x1 LCD panel /
wim	39:e9c2319de9c5	224	LCD24x2 = (LCD_T_A \| LCD_T_C24 \| LCD_T_R2), /*< 24x2 LCD panel /
wim	39:e9c2319de9c5	225	// LCD24x3D = (LCD_T_D \| LCD_T_C24 \| LCD_T_R3), /*< 24x3 LCD panel /
wim	39:e9c2319de9c5	226	// LCD24x3D1 = (LCD_T_D \| LCD_T_C24 \| LCD_T_R3), /*< 24x3 LCD panel /
wim	39:e9c2319de9c5	227	LCD24x4D = (LCD_T_D \| LCD_T_C24 \| LCD_T_R4), /*< 24x4 LCD panel, special mode KS0078 /
wim	33:900a94bc7585	228	// LCD32x1 = (LCD_T_A \| LCD_T_C32 \| LCD_T_R1), /*< 32x1 LCD panel /
wim	39:e9c2319de9c5	229	// LCD32x1C = (LCD_T_C \| LCD_T_C32 \| LCD_T_R1), /*< 32x1 LCD panel (actually 16x2) /
wim	41:111ca62e8a59	230	LCD32x2 = (LCD_T_A \| LCD_T_C32 \| LCD_T_R2), /*< 32x2 LCD panel /
wim	41:111ca62e8a59	231	// LCD32x4 = (LCD_T_A \| LCD_T_C32 \| LCD_T_R4), /*< 32x4 LCD panel, Two controller version ? /
wim	39:e9c2319de9c5	232	// LCD40x1 = (LCD_T_A \| LCD_T_C40 \| LCD_T_R1), /*< 40x1 LCD panel /
wim	39:e9c2319de9c5	233	// LCD40x1C = (LCD_T_C \| LCD_T_C40 \| LCD_T_R1), /*< 40x1 LCD panel (actually 20x2) /
wim	39:e9c2319de9c5	234	LCD40x2 = (LCD_T_A \| LCD_T_C40 \| LCD_T_R2), /*< 40x2 LCD panel /
wim	41:111ca62e8a59	235	// LCD52x1 = (LCD_T_A \| LCD_T_C52 \| LCD_T_R1), /*< 52x1 LCD panel, special mode KS0073 /
wim	41:111ca62e8a59	236	#if (LCD_TWO_CTRL == 1)
wim	39:e9c2319de9c5	237	LCD40x4 = (LCD_T_E \| LCD_T_C40 \| LCD_T_R4) /*< 40x4 LCD panel, Two controller version /
wim	41:111ca62e8a59	238	#endif
wim	30:033048611c01	239	};
wim	30:033048611c01	240
wim	30:033048611c01	241
wim	30:033048611c01	242	/** LCD Controller Device */
wim	30:033048611c01	243	enum LCDCtrl {
wim	37:ce348c002929	244	HD44780 = 0 \| LCD_C_PAR, /*< HD44780 or full equivalent (default) /
wim	37:ce348c002929	245	AC780 = 1 \| (LCD_C_PAR \| LCD_C_SPI4 \| LCD_C_I2C \| LCD_C_PDN), /*< AC780/KS0066i 4/8 bit, SPI, I2C /
wim	37:ce348c002929	246	AIP31068 = 2 \| (LCD_C_SPI3_9 \| LCD_C_I2C \| LCD_C_BST), /*< AIP31068 I2C, SPI3 /
wim	37:ce348c002929	247	KS0073 = 3 \| (LCD_C_PAR \| LCD_C_SPI3_24 \| LCD_C_PDN), /*< KS0073 4/8 bit, SPI3 /
wim	37:ce348c002929	248	KS0078 = 4 \| (LCD_C_PAR \| LCD_C_SPI3_24 \| LCD_C_PDN), /*< KS0078 24x4 support, 4/8 bit, SPI3 /
wim	37:ce348c002929	249	PCF2103_3V3 = 5 \| (LCD_C_PAR \| LCD_C_I2C), /*< PCF2103 3V3 no Booster, 4/8 bit, I2C /
wim	37:ce348c002929	250	PCF2113_3V3 = 6 \| (LCD_C_PAR \| LCD_C_I2C \| LCD_C_BST \| LCD_C_CTR), /*< PCF2113 3V3 with Booster, 4/8 bit, I2C /
wim	37:ce348c002929	251	PCF2116_3V3 = 7 \| (LCD_C_PAR \| LCD_C_I2C \| LCD_C_BST), /*< PCF2116 3V3 with Booster, 4/8 bit, I2C /
wim	41:111ca62e8a59	252	// PCF2116C_3V3 = \| (LCD_C_PAR \| LCD_C_I2C \| LCD_C_BST \| LCD_C_FC), /*< PCF2116C 3V3 with Booster, 4/8 bit, I2C /
wim	41:111ca62e8a59	253	// PCF2116K_3V3 = \| (LCD_C_PAR \| LCD_C_I2C \| LCD_C_BST \| LCD_C_FK), /*< PCF2116K 3V3 with Booster, 4/8 bit, I2C /
wim	39:e9c2319de9c5	254	PCF2116_5V = 8 \| (LCD_C_PAR \| LCD_C_I2C), /*< PCF2116 5V no Booster, 4/8 bit, I2C /
wim	41:111ca62e8a59	255	PCF2116C_5V = 9 \| (LCD_C_PAR \| LCD_C_I2C \| LCD_C_BST \| LCD_C_FC), /*< PCF2116C 3V3 with Booster, 4/8 bit, I2C /
wim	39:e9c2319de9c5	256	PCF2119_3V3 = 10 \| (LCD_C_PAR \| LCD_C_I2C \| LCD_C_BST \| LCD_C_CTR), /*< PCF2119 3V3 with Booster, 4/8 bit, I2C /
wim	41:111ca62e8a59	257	// PCF2119C_3V3 = 11 \| (LCD_C_PAR \| LCD_C_I2C \| LCD_C_BST \| LCD_C_CTR \| LCD_C_FC), /*< PCF2119K 3V3 with Booster, 4/8 bit, I2C /
wim	41:111ca62e8a59	258	PCF2119R_3V3 = 12 \| (LCD_C_PAR \| LCD_C_I2C \| LCD_C_BST \| LCD_C_CTR \| LCD_C_FR), /*< PCF2119R 3V3 with Booster, 4/8 bit, I2C /
wim	39:e9c2319de9c5	259	// PCF2119_5V = \| (LCD_C_PAR \| LCD_C_I2C), /*< PCF2119 5V no Booster, 4/8 bit, I2C /
wim	41:111ca62e8a59	260	PT6314 = 13 \| (LCD_C_PAR \| LCD_C_SPI3_16 \| LCD_C_CTR), /*< PT6314 VFD Controller, 4/8 bit, SPI3 /
wim	41:111ca62e8a59	261	// PT6880 = xx \| (LCD_C_PAR \| LCD_C_SPI3_16 \| LCD_C_CTR), /*< PT6880 OLED controller, 4/8 bit, SPI3 /
wim	37:ce348c002929	262	SSD1803_3V3 = 14 \| (LCD_C_PAR \| LCD_C_SPI3_24 \| LCD_C_I2C \| LCD_C_BST \| LCD_C_CTR \| LCD_C_PDN), /*< SSD1803 3V3 with Booster, 4/8 bit, I2C, SPI3 /
wim	37:ce348c002929	263	// SSD1803_5V = 15 \| (LCD_C_PAR \| LCD_C_SPI3_24 \| LCD_C_I2C \| LCD_C_BST \| LCD_C_CTR \| LCD_C_PDN), /*< SSD1803 3V3 with Booster, 4/8 bit, I2C, SPI3 /
wim	41:111ca62e8a59	264	ST7032_3V3 = 16 \| (LCD_C_PAR \| LCD_C_SPI4 \| LCD_C_I2C \| LCD_C_BST \| LCD_C_CTR), /*< ST7032/SPLC792A 3V3 with Booster, 4/8 bit, SPI4, I2C /
wim	41:111ca62e8a59	265	ST7032_5V = 17 \| (LCD_C_PAR \| LCD_C_SPI4 \| LCD_C_I2C \| LCD_C_CTR), /*< ST7032/SPLC792A 5V no Booster, 4/8 bit, SPI4, I2C /
wim	37:ce348c002929	266	ST7036_3V3 = 18 \| (LCD_C_PAR \| LCD_C_SPI4 \| LCD_C_I2C \| LCD_C_BST \| LCD_C_CTR), /*< ST7036 3V3 with Booster, 4/8 bit, SPI4, I2C /
wim	37:ce348c002929	267	ST7036_5V = 19 \| (LCD_C_PAR \| LCD_C_SPI4 \| LCD_C_I2C \| LCD_C_BST \| LCD_C_CTR), /*< ST7036 5V no Booster, 4/8 bit, SPI4, I2C /
wim	37:ce348c002929	268	ST7066_ACM = 20 \| (LCD_C_PAR \| LCD_C_I2C), /*< ST7066 4/8 bit, I2C on ACM1602 using a PIC /
wim	37:ce348c002929	269	ST7070 = 21 \| (LCD_C_PAR \| LCD_C_SPI3_8 \| LCD_C_SPI4), /*< ST7070 4/8 bit, SPI3 /
wim	37:ce348c002929	270	US2066_3V3 = 22 \| (LCD_C_PAR \| LCD_C_SPI3_24 \| LCD_C_I2C \| LCD_C_CTR \| LCD_C_PDN), /*< US2066/SSD1311 3V3, 4/8 bit, I2C, SPI3 /
wim	39:e9c2319de9c5	271	WS0010 = 23 \| (LCD_C_PAR \| LCD_C_SPI3_10 \| LCD_C_PDN), /*< WS0010/RS0010 OLED Controller, 4/8 bit, SPI3 /
wim	37:ce348c002929	272	// WS0012 = 24 \| (LCD_C_PAR \| LCD_C_SPI3_10 \| LCD_C_I2C \| LCD_C_PDN), /*< WS0012 4/8 bit, SPI, I2C /
wim	41:111ca62e8a59	273	HD66712 = 25 \| (LCD_C_PAR \| LCD_C_SPI3_24 \| LCD_C_BST \| LCD_C_PDN), /*< HD66712 Controller, 4/8 bit, SPI3 /
wim	41:111ca62e8a59	274	SPLC792A_3V3 = 26 \| (LCD_C_PAR \| LCD_C_SPI3_9 \| LCD_C_SPI4 \| LCD_C_I2C \| LCD_C_BST \| LCD_C_CTR) /*< ST7032/SPLC792A 3V3 with Booster, 4/8 bit, SPI3, SPI4, I2C /
wim	30:033048611c01	275	};
wim	30:033048611c01	276
wim	30:033048611c01	277
wim	10:dd9b3a696acd	278	/** LCD Cursor control */
wim	10:dd9b3a696acd	279	enum LCDCursor {
wim	17:652ab113bc2e	280	CurOff_BlkOff = 0x00, /*< Cursor Off, Blinking Char Off /
wim	41:111ca62e8a59	281	CurOff_BlkOn = 0x01, /*< Cursor Off, Blinking Char On /
wim	41:111ca62e8a59	282	CurOn_BlkOff = 0x02, /*< Cursor On, Blinking Char Off /
wim	41:111ca62e8a59	283	CurOn_BlkOn = 0x03 /*< Cursor On, Blinking Char On /
wim	17:652ab113bc2e	284	};
wim	17:652ab113bc2e	285
wim	17:652ab113bc2e	286	/** LCD Display control */
wim	17:652ab113bc2e	287	enum LCDMode {
wim	17:652ab113bc2e	288	DispOff = 0x00, /*< Display Off /
wim	17:652ab113bc2e	289	DispOn = 0x04 /*< Display On /
wim	10:dd9b3a696acd	290	};
wim	10:dd9b3a696acd	291
wim	20:e0da005a777f	292	/** LCD Backlight control */
wim	20:e0da005a777f	293	enum LCDBacklight {
wim	20:e0da005a777f	294	LightOff, /*< Backlight Off /
wim	20:e0da005a777f	295	LightOn /*< Backlight On /
wim	20:e0da005a777f	296	};
wim	10:dd9b3a696acd	297
wim	33:900a94bc7585	298	/** LCD Blink control (UDC), supported for some Controllers */
wim	33:900a94bc7585	299	enum LCDBlink {
wim	33:900a94bc7585	300	BlinkOff, /*< Blink Off /
wim	33:900a94bc7585	301	BlinkOn /*< Blink On /
wim	33:900a94bc7585	302	};
wim	33:900a94bc7585	303
wim	33:900a94bc7585	304	/** LCD Orientation control, supported for some Controllers */
wim	33:900a94bc7585	305	enum LCDOrient {
wim	33:900a94bc7585	306	Top, /*< Top view /
wim	33:900a94bc7585	307	Bottom /*< Upside down view /
wim	33:900a94bc7585	308	};
wim	33:900a94bc7585	309
wim	41:111ca62e8a59	310	#if (LCD_BIGFONT == 1)
wim	34:e5a0dcb43ecc	311	/** LCD BigFont control, supported for some Controllers */
wim	34:e5a0dcb43ecc	312	enum LCDBigFont {
wim	34:e5a0dcb43ecc	313	None, /*< no lines /
wim	34:e5a0dcb43ecc	314	TopLine, /*< 1+2 line /
wim	34:e5a0dcb43ecc	315	CenterLine, /*< 2+3 line /
wim	34:e5a0dcb43ecc	316	BottomLine, /*< 2+3 line or 3+4 line /
wim	34:e5a0dcb43ecc	317	TopBottomLine /*< 1+2 line and 3+4 line /
wim	34:e5a0dcb43ecc	318	};
wim	41:111ca62e8a59	319	#endif
wim	33:900a94bc7585	320
wim	41:111ca62e8a59	321	#if (LCD_FONTSEL == 1)
wim	41:111ca62e8a59	322	/** LCD setFont control.
wim	41:111ca62e8a59	323	Note: most controllers support only one font and the hardware specific
wim	41:111ca62e8a59	324	fonttable is encoded as part of the controller type number (eg PCF21XXC or PCF21XXR).
wim	41:111ca62e8a59	325	Some controllers support multiple tables that can only be selected by logic levels on a few pins.
wim	41:111ca62e8a59	326	Some controllers also support runtime fontable switching through a specific instruction */
wim	41:111ca62e8a59	327	enum LCDFont {
wim	41:111ca62e8a59	328	/*< HD44780 fonttable /
wim	41:111ca62e8a59	329	Font_0 = LCD_C_F0, /*< default, UK/JAP /
wim	41:111ca62e8a59	330	/*< PCF21XX fonttables /
wim	41:111ca62e8a59	331	Font_C = LCD_C_FC, /*< PCF21XXC /
wim	41:111ca62e8a59	332	Font_R = LCD_C_FR, /*< PCF21XXR /
wim	41:111ca62e8a59	333	/*< SSD1803 ROM tables /
wim	41:111ca62e8a59	334	Font_RA = LCD_C_FRA, /*< UK/EU /
wim	41:111ca62e8a59	335	Font_RB = LCD_C_FRB, /*< UK/Cyrillic /
wim	41:111ca62e8a59	336	Font_RC = LCD_C_FRC, /*< default, UK/JAP /
wim	41:111ca62e8a59	337	Font_D = LCD_C_FD, /*< SPLC780D Cyrillic /
wim	41:111ca62e8a59	338	Font_T = LCD_C_FT /*< ST7066-0T Cyrillic /
wim	41:111ca62e8a59	339	};
wim	41:111ca62e8a59	340	#endif
wim	34:e5a0dcb43ecc	341
wim	41:111ca62e8a59	342	#if ((LCD_C_FONT == 1) \|\| (LCD_R_FONT == 1)) //PCF21xxC or PCF21xxR font
wim	37:ce348c002929	343	/** Convert ASCII character code to the LCD fonttable code
wim	37:ce348c002929	344	*
wim	37:ce348c002929	345	* @param c The character to write to the display
wim	37:ce348c002929	346	* @return The character code for the specific fonttable of the controller
wim	37:ce348c002929	347	*/
wim	37:ce348c002929	348	int ASCII_2_LCD (int c);
wim	41:111ca62e8a59	349	#endif
wim	37:ce348c002929	350
wim	41:111ca62e8a59	351	#if(LCD_UTF8_FONT == 1)
wim	41:111ca62e8a59	352	/** Convert UTF8 2-byte character code to the LCD fonttable code
wim	41:111ca62e8a59	353	* @param c The character to write to the display
wim	41:111ca62e8a59	354	* @return character code for the specific fonttable of the controller or -1 if UTF8 code is not yet complete or incorrect
wim	41:111ca62e8a59	355	*
wim	41:111ca62e8a59	356	* Orig by Andriy, Modified by WH
wim	41:111ca62e8a59	357	*
wim	41:111ca62e8a59	358	* Note: The UTF8 decoding table for a specific controller is defined and selected in file TextLCD_UTF8.inc
wim	41:111ca62e8a59	359	* The table is accessed in this UTF_2_LCD() method through
wim	41:111ca62e8a59	360	* #define UTF_FIRST, UTF_LAST, UTF_SEQ_REC_FIRST, UTF_SEQ_REC_LAST and
wim	41:111ca62e8a59	361	* #define UTF_SEQ_RECODE and UTF_RND_RECODE
wim	41:111ca62e8a59	362	*/
wim	41:111ca62e8a59	363	int UTF_2_LCD (int c);
wim	41:111ca62e8a59	364	#endif
wim	41:111ca62e8a59	365
wim	37:ce348c002929	366
wim	34:e5a0dcb43ecc	367	#if(LCD_PRINTF != 1)
wim	34:e5a0dcb43ecc	368	/** Write a character to the LCD
wim	34:e5a0dcb43ecc	369	*
wim	34:e5a0dcb43ecc	370	* @param c The character to write to the display
wim	34:e5a0dcb43ecc	371	*/
wim	34:e5a0dcb43ecc	372	int putc(int c);
wim	34:e5a0dcb43ecc	373
wim	34:e5a0dcb43ecc	374	/** Write a raw string to the LCD
wim	34:e5a0dcb43ecc	375	*
wim	34:e5a0dcb43ecc	376	* @param string text, may be followed by variables to emulate formatting the string.
wim	34:e5a0dcb43ecc	377	* However, printf formatting is NOT supported and variables will be ignored!
wim	34:e5a0dcb43ecc	378	*/
wim	34:e5a0dcb43ecc	379	int printf(const char* text, ...);
wim	34:e5a0dcb43ecc	380	#else
simon	2:227356c7d12c	381	#if DOXYGEN_ONLY
simon	2:227356c7d12c	382	/** Write a character to the LCD
simon	2:227356c7d12c	383	*
simon	2:227356c7d12c	384	* @param c The character to write to the display
simon	2:227356c7d12c	385	*/
simon	2:227356c7d12c	386	int putc(int c);
simon	2:227356c7d12c	387
wim	34:e5a0dcb43ecc	388	/** Write a formatted string to the LCD
simon	2:227356c7d12c	389	*
simon	2:227356c7d12c	390	* @param format A printf-style format string, followed by the
wim	34:e5a0dcb43ecc	391	* variables to use in formatting the string.
simon	2:227356c7d12c	392	*/
wim	34:e5a0dcb43ecc	393	int printf(const char* format, ...);
simon	2:227356c7d12c	394	#endif
wim	34:e5a0dcb43ecc	395
wim	34:e5a0dcb43ecc	396	#endif
simon	2:227356c7d12c	397
wim	29:a3663151aa65	398	/** Locate cursor to a screen column and row
simon	2:227356c7d12c	399	*
simon	2:227356c7d12c	400	* @param column The horizontal position from the left, indexed from 0
simon	2:227356c7d12c	401	* @param row The vertical position from the top, indexed from 0
simon	2:227356c7d12c	402	*/
simon	1:ac48b187213c	403	void locate(int column, int row);
simon	2:227356c7d12c	404
wim	10:dd9b3a696acd	405	/** Return the memoryaddress of screen column and row location
wim	10:dd9b3a696acd	406	*
wim	10:dd9b3a696acd	407	* @param column The horizontal position from the left, indexed from 0
wim	10:dd9b3a696acd	408	* @param row The vertical position from the top, indexed from 0
wim	36:9f5f86dfd44a	409	* @return The memoryaddress of screen column and row location
wim	10:dd9b3a696acd	410	*/
wim	39:e9c2319de9c5	411	int getAddress(int column, int row);
wim	10:dd9b3a696acd	412
wim	10:dd9b3a696acd	413	/** Set the memoryaddress of screen column and row location
wim	10:dd9b3a696acd	414	*
wim	10:dd9b3a696acd	415	* @param column The horizontal position from the left, indexed from 0
wim	10:dd9b3a696acd	416	* @param row The vertical position from the top, indexed from 0
wim	10:dd9b3a696acd	417	*/
wim	9:0893d986e717	418	void setAddress(int column, int row);
wim	9:0893d986e717	419
wim	22:35742ec80c24	420	/** Clear the screen and locate to 0,0
wim	22:35742ec80c24	421	*/
simon	1:ac48b187213c	422	void cls();
simon	2:227356c7d12c	423
wim	10:dd9b3a696acd	424	/** Return the number of rows
wim	10:dd9b3a696acd	425	*
wim	36:9f5f86dfd44a	426	* @return The number of rows
wim	10:dd9b3a696acd	427	*/
simon	1:ac48b187213c	428	int rows();
wim	10:dd9b3a696acd	429
wim	10:dd9b3a696acd	430	/** Return the number of columns
wim	10:dd9b3a696acd	431	*
wim	36:9f5f86dfd44a	432	* @return The number of columns
wim	10:dd9b3a696acd	433	*/
wim	10:dd9b3a696acd	434	int columns();
simon	2:227356c7d12c	435
wim	11:9ec02df863a1	436	/** Set the Cursormode
wim	11:9ec02df863a1	437	*
wim	17:652ab113bc2e	438	* @param cursorMode The Cursor mode (CurOff_BlkOff, CurOn_BlkOff, CurOff_BlkOn, CurOn_BlkOn)
wim	11:9ec02df863a1	439	*/
wim	17:652ab113bc2e	440	void setCursor(LCDCursor cursorMode);
wim	17:652ab113bc2e	441
wim	17:652ab113bc2e	442	/** Set the Displaymode
wim	17:652ab113bc2e	443	*
wim	17:652ab113bc2e	444	* @param displayMode The Display mode (DispOff, DispOn)
wim	17:652ab113bc2e	445	*/
wim	21:9eb628d9e164	446	void setMode(LCDMode displayMode);
wim	11:9ec02df863a1	447
wim	20:e0da005a777f	448	/** Set the Backlight mode
wim	20:e0da005a777f	449	*
wim	21:9eb628d9e164	450	* @param backlightMode The Backlight mode (LightOff, LightOn)
wim	20:e0da005a777f	451	*/
wim	21:9eb628d9e164	452	void setBacklight(LCDBacklight backlightMode);
wim	20:e0da005a777f	453
wim	33:900a94bc7585	454	/** Set User Defined Characters (UDC)
wim	11:9ec02df863a1	455	*
wim	34:e5a0dcb43ecc	456	* @param unsigned char c The Index of the UDC (0..7) for HD44780 clones and (0..15) for some more advanced controllers
wim	34:e5a0dcb43ecc	457	* @param char *udc_data The bitpatterns for the UDC (8 bytes of 5 significant bits for bitpattern and 3 bits for blinkmode (advanced types))
wim	11:9ec02df863a1	458	*/
wim	11:9ec02df863a1	459	void setUDC(unsigned char c, char *udc_data);
wim	11:9ec02df863a1	460
wim	39:e9c2319de9c5	461	#if(LCD_BLINK == 1)
wim	36:9f5f86dfd44a	462	/** Set UDC Blink and Icon blink
wim	33:900a94bc7585	463	* setUDCBlink method is supported by some compatible devices (eg SSD1803)
wim	33:900a94bc7585	464	*
wim	33:900a94bc7585	465	* @param blinkMode The Blink mode (BlinkOff, BlinkOn)
wim	33:900a94bc7585	466	*/
wim	33:900a94bc7585	467	void setUDCBlink(LCDBlink blinkMode);
wim	39:e9c2319de9c5	468	#endif
wim	33:900a94bc7585	469
wim	41:111ca62e8a59	470	#if(LCD_CONTRAST == 1)
wim	32:59c4b8f648d4	471	/** Set Contrast
wim	32:59c4b8f648d4	472	* setContrast method is supported by some compatible devices (eg ST7032i) that have onboard LCD voltage generation
wim	32:59c4b8f648d4	473	* Code imported from fork by JH1PJL
wim	32:59c4b8f648d4	474	*
wim	32:59c4b8f648d4	475	* @param unsigned char c contrast data (6 significant bits, valid range 0..63, Value 0 will disable the Vgen)
wim	32:59c4b8f648d4	476	* @return none
wim	32:59c4b8f648d4	477	*/
wim	32:59c4b8f648d4	478	void setContrast(unsigned char c = LCD_DEF_CONTRAST);
wim	41:111ca62e8a59	479	#endif
wim	32:59c4b8f648d4	480
wim	39:e9c2319de9c5	481	#if(LCD_POWER == 1)
wim	32:59c4b8f648d4	482	/** Set Power
wim	32:59c4b8f648d4	483	* setPower method is supported by some compatible devices (eg SSD1803) that have power down modes
wim	32:59c4b8f648d4	484	*
wim	32:59c4b8f648d4	485	* @param bool powerOn Power on/off
wim	32:59c4b8f648d4	486	* @return none
wim	32:59c4b8f648d4	487	*/
wim	32:59c4b8f648d4	488	void setPower(bool powerOn = true);
wim	39:e9c2319de9c5	489	#endif
wim	32:59c4b8f648d4	490
wim	39:e9c2319de9c5	491	#if(LCD_ORIENT == 1)
wim	33:900a94bc7585	492	/** Set Orient
wim	33:900a94bc7585	493	* setOrient method is supported by some compatible devices (eg SSD1803, US2066) that have top/bottom view modes
wim	33:900a94bc7585	494	*
wim	33:900a94bc7585	495	* @param LCDOrient orient Orientation
wim	33:900a94bc7585	496	* @return none
wim	33:900a94bc7585	497	*/
wim	33:900a94bc7585	498	void setOrient(LCDOrient orient = Top);
wim	39:e9c2319de9c5	499	#endif
wim	33:900a94bc7585	500
wim	39:e9c2319de9c5	501	#if(LCD_BIGFONT == 1)
wim	34:e5a0dcb43ecc	502	/** Set Big Font
wim	34:e5a0dcb43ecc	503	* setBigFont method is supported by some compatible devices (eg SSD1803, US2066)
wim	34:e5a0dcb43ecc	504	*
wim	34:e5a0dcb43ecc	505	* @param lines The selected Big Font lines (None, TopLine, CenterLine, BottomLine, TopBottomLine)
wim	34:e5a0dcb43ecc	506	* Double height characters can be shown on lines 1+2, 2+3, 3+4 or 1+2 and 3+4
wim	34:e5a0dcb43ecc	507	* Valid double height lines depend on the LCDs number of rows.
wim	41:111ca62e8a59	508	* @return none
wim	34:e5a0dcb43ecc	509	*/
wim	34:e5a0dcb43ecc	510	void setBigFont(LCDBigFont lines);
wim	39:e9c2319de9c5	511	#endif
wim	32:59c4b8f648d4	512
wim	41:111ca62e8a59	513	#if(LCD_FONTSEL == 1)
wim	41:111ca62e8a59	514	/** Set Font
wim	41:111ca62e8a59	515	* setFont method is supported by some compatible devices (eg SSD1803, US2066, ST7070)
wim	41:111ca62e8a59	516	*
wim	41:111ca62e8a59	517	* @param LCDFont font The selected Font
wim	41:111ca62e8a59	518	* @return none
wim	41:111ca62e8a59	519	*/
wim	41:111ca62e8a59	520	void setFont(LCDFont font = Font_0);
wim	41:111ca62e8a59	521	#endif
wim	41:111ca62e8a59	522
wim	41:111ca62e8a59	523
wim	39:e9c2319de9c5	524	#if(LCD_ICON==1)
wim	36:9f5f86dfd44a	525	/** Set Icons
wim	36:9f5f86dfd44a	526	*
wim	36:9f5f86dfd44a	527	* @param unsigned char idx The Index of the icon pattern (0..15) for KS0073 and similar controllers
wim	36:9f5f86dfd44a	528	* and Index (0..31) for PCF2103 and similar controllers
wim	36:9f5f86dfd44a	529	* @param unsigned char data The bitpattern for the icons (6 lsb for KS0073 bitpattern (5 lsb for KS0078) and 2 msb for blinkmode)
wim	36:9f5f86dfd44a	530	* The bitpattern for the PCF2103 icons is 5 lsb (UDC 0..2) and 5 lsb for blinkmode (UDC 4..6)
wim	36:9f5f86dfd44a	531	*/
wim	36:9f5f86dfd44a	532	void setIcon(unsigned char idx, unsigned char data);
wim	36:9f5f86dfd44a	533
wim	36:9f5f86dfd44a	534	/** Clear Icons
wim	36:9f5f86dfd44a	535	*
wim	36:9f5f86dfd44a	536	* @param none
wim	36:9f5f86dfd44a	537	* @return none
wim	36:9f5f86dfd44a	538	*/
wim	36:9f5f86dfd44a	539	//@TODO Add support for 40x4 dual controller
wim	36:9f5f86dfd44a	540	void clrIcon();
wim	39:e9c2319de9c5	541	#endif
wim	36:9f5f86dfd44a	542
wim	39:e9c2319de9c5	543	#if(LCD_INVERT == 1)
wim	36:9f5f86dfd44a	544	/** Set Invert
wim	36:9f5f86dfd44a	545	* setInvert method is supported by some compatible devices (eg KS0073) to swap between black and white
wim	36:9f5f86dfd44a	546	*
wim	36:9f5f86dfd44a	547	* @param bool invertOn Invert on/off
wim	36:9f5f86dfd44a	548	* @return none
wim	36:9f5f86dfd44a	549	*/
wim	36:9f5f86dfd44a	550	//@TODO Add support for 40x4 dual controller
wim	36:9f5f86dfd44a	551	void setInvert(bool invertOn);
wim	39:e9c2319de9c5	552	#endif
wim	36:9f5f86dfd44a	553
simon	1:ac48b187213c	554	protected:
wim	13:24506ba22480	555
wim	21:9eb628d9e164	556	/** LCD controller select, mainly used for LCD40x4
wim	21:9eb628d9e164	557	*/
wim	19:c747b9e2e7b8	558	enum _LCDCtrl_Idx {
wim	15:b70ebfffb258	559	_LCDCtrl_0, /< Primary /
wim	15:b70ebfffb258	560	_LCDCtrl_1, /< Secondary /
wim	15:b70ebfffb258	561	};
wim	21:9eb628d9e164	562
wim	37:ce348c002929	563	/** LCD Datalength control to select between 4 or 8 bit data/commands, mainly used for native Serial interface */
wim	36:9f5f86dfd44a	564	enum _LCDDatalength {
wim	36:9f5f86dfd44a	565	_LCD_DL_4 = 0x00, /*< Datalength 4 bit /
wim	36:9f5f86dfd44a	566	_LCD_DL_8 = 0x10 /*< Datalength 8 bit /
wim	36:9f5f86dfd44a	567	};
wim	36:9f5f86dfd44a	568
wim	21:9eb628d9e164	569	/** Create a TextLCD_Base interface
wim	21:9eb628d9e164	570	* @brief Base class, can not be instantiated
wim	21:9eb628d9e164	571	*
wim	21:9eb628d9e164	572	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	21:9eb628d9e164	573	* @param ctrl LCD controller (default = HD44780)
wim	21:9eb628d9e164	574	*/
wim	21:9eb628d9e164	575	TextLCD_Base(LCDType type = LCD16x2, LCDCtrl ctrl = HD44780);
wim	15:b70ebfffb258	576
simon	1:ac48b187213c	577	// Stream implementation functions
simon	1:ac48b187213c	578	virtual int _putc(int value);
simon	1:ac48b187213c	579	virtual int _getc();
simon	1:ac48b187213c	580
wim	36:9f5f86dfd44a	581	/** Medium level initialisation method for LCD controller
wim	36:9f5f86dfd44a	582	* @param _LCDDatalength dl sets the datalength of data/commands
wim	36:9f5f86dfd44a	583	* @return none
wim	21:9eb628d9e164	584	*/
wim	36:9f5f86dfd44a	585	void _init(_LCDDatalength dl = _LCD_DL_4);
wim	29:a3663151aa65	586
wim	29:a3663151aa65	587	/** Low level initialisation method for LCD controller
wim	36:9f5f86dfd44a	588	* Set number of lines, fonttype, no cursor etc
wim	36:9f5f86dfd44a	589	* The controller is accessed in 4-bit parallel mode either directly via mbed pins or through I2C or SPI expander.
wim	36:9f5f86dfd44a	590	* Some controllers also support native I2C or SPI interfaces.
wim	36:9f5f86dfd44a	591	*
wim	36:9f5f86dfd44a	592	* @param _LCDDatalength dl sets the 4 or 8 bit datalength of data/commands. Required for some native serial modes.
wim	36:9f5f86dfd44a	593	* @return none
wim	29:a3663151aa65	594	*/
wim	36:9f5f86dfd44a	595	void _initCtrl(_LCDDatalength dl = _LCD_DL_4);
wim	29:a3663151aa65	596
wim	29:a3663151aa65	597	/** Low level character address set method
wim	29:a3663151aa65	598	*/
wim	13:24506ba22480	599	int _address(int column, int row);
wim	29:a3663151aa65	600
wim	29:a3663151aa65	601	/** Low level cursor enable or disable method
wim	29:a3663151aa65	602	*/
wim	21:9eb628d9e164	603	void _setCursor(LCDCursor show);
wim	29:a3663151aa65	604
wim	29:a3663151aa65	605	/** Low level method to store user defined characters for current controller
wim	34:e5a0dcb43ecc	606	*
wim	34:e5a0dcb43ecc	607	* @param unsigned char c The Index of the UDC (0..7) for HD44780 clones and (0..15) for some more advanced controllers
wim	34:e5a0dcb43ecc	608	* @param char *udc_data The bitpatterns for the UDC (8 bytes of 5 significant bits)
wim	29:a3663151aa65	609	*/
wim	17:652ab113bc2e	610	void _setUDC(unsigned char c, char *udc_data);
wim	29:a3663151aa65	611
wim	29:a3663151aa65	612	/** Low level method to restore the cursortype and display mode for current controller
wim	29:a3663151aa65	613	*/
wim	21:9eb628d9e164	614	void _setCursorAndDisplayMode(LCDMode displayMode, LCDCursor cursorType);
wim	13:24506ba22480	615
wim	29:a3663151aa65	616	/** Low level nibble write operation to LCD controller (serial or parallel)
wim	21:9eb628d9e164	617	*/
wim	17:652ab113bc2e	618	void _writeNibble(int value);
wim	29:a3663151aa65	619
wim	29:a3663151aa65	620	/** Low level command byte write operation to LCD controller.
wim	29:a3663151aa65	621	* Methods resets the RS bit and provides the required timing for the command.
wim	29:a3663151aa65	622	*/
wim	15:b70ebfffb258	623	void _writeCommand(int command);
wim	33:900a94bc7585	624
wim	29:a3663151aa65	625	/** Low level data byte write operation to LCD controller (serial or parallel).
wim	29:a3663151aa65	626	* Methods sets the RS bit and provides the required timing for the data.
wim	29:a3663151aa65	627	*/
wim	15:b70ebfffb258	628	void _writeData(int data);
wim	15:b70ebfffb258	629
wim	29:a3663151aa65	630	/** Pure Virtual Low level writes to LCD Bus (serial or parallel)
wim	29:a3663151aa65	631	* Set the Enable pin.
wim	29:a3663151aa65	632	*/
wim	29:a3663151aa65	633	virtual void _setEnable(bool value) = 0;
wim	29:a3663151aa65	634
wim	21:9eb628d9e164	635	/** Pure Virtual Low level writes to LCD Bus (serial or parallel)
wim	29:a3663151aa65	636	* Set the RS pin ( 0 = Command, 1 = Data).
wim	29:a3663151aa65	637	*/
wim	21:9eb628d9e164	638	virtual void _setRS(bool value) = 0;
wim	29:a3663151aa65	639
wim	29:a3663151aa65	640	/** Pure Virtual Low level writes to LCD Bus (serial or parallel)
wim	29:a3663151aa65	641	* Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim	29:a3663151aa65	642	*/
wim	21:9eb628d9e164	643	virtual void _setBL(bool value) = 0;
wim	29:a3663151aa65	644
wim	29:a3663151aa65	645	/** Pure Virtual Low level writes to LCD Bus (serial or parallel)
wim	29:a3663151aa65	646	* Set the databus value (4 bit).
wim	29:a3663151aa65	647	*/
wim	21:9eb628d9e164	648	virtual void _setData(int value) = 0;
wim	13:24506ba22480	649
wim	29:a3663151aa65	650	/** Low level byte write operation to LCD controller (serial or parallel)
wim	29:a3663151aa65	651	* Depending on the RS pin this byte will be interpreted as data or command
wim	29:a3663151aa65	652	*/
wim	29:a3663151aa65	653	virtual void _writeByte(int value);
wim	33:900a94bc7585	654
wim	13:24506ba22480	655	//Display type
wim	37:ce348c002929	656	LCDType _type; // Display type
wim	37:ce348c002929	657	int _nr_cols;
wim	30:033048611c01	658	int _nr_rows;
wim	37:ce348c002929	659	int _addr_mode; // Addressing mode of LCDType, defines relation between display row,col and controller memory address
wim	37:ce348c002929	660
wim	21:9eb628d9e164	661	//Display mode
wim	17:652ab113bc2e	662	LCDMode _currentMode;
wim	17:652ab113bc2e	663
wim	19:c747b9e2e7b8	664	//Controller type
wim	37:ce348c002929	665	LCDCtrl _ctrl; // Controller type
wim	37:ce348c002929	666	int _font; // ASCII character fonttable
wim	37:ce348c002929	667
wim	15:b70ebfffb258	668	//Controller select, mainly used for LCD40x4
wim	19:c747b9e2e7b8	669	_LCDCtrl_Idx _ctrl_idx;
wim	15:b70ebfffb258	670
wim	13:24506ba22480	671	// Cursor
simon	1:ac48b187213c	672	int _column;
simon	1:ac48b187213c	673	int _row;
wim	32:59c4b8f648d4	674	LCDCursor _currentCursor;
wim	32:59c4b8f648d4	675
wim	36:9f5f86dfd44a	676	// Function modes saved to allow switch between Instruction sets after initialisation time
wim	36:9f5f86dfd44a	677	int _function, _function_1, _function_x;
wim	36:9f5f86dfd44a	678
wim	32:59c4b8f648d4	679	// Icon, Booster mode and contrast saved to allow contrast change at later time
wim	32:59c4b8f648d4	680	// Only available for controllers with added features
wim	36:9f5f86dfd44a	681	int _icon_power, _contrast;
simon	1:ac48b187213c	682	};
simon	1:ac48b187213c	683
wim	23:d47f226efb24	684	//--------- End TextLCD_Base -----------
wim	22:35742ec80c24	685
wim	22:35742ec80c24	686
wim	23:d47f226efb24	687	//--------- Start TextLCD Bus -----------
wim	21:9eb628d9e164	688
wim	21:9eb628d9e164	689	/** Create a TextLCD interface for using regular mbed pins
wim	21:9eb628d9e164	690	*
wim	21:9eb628d9e164	691	*/
wim	21:9eb628d9e164	692	class TextLCD : public TextLCD_Base {
wim	21:9eb628d9e164	693	public:
wim	21:9eb628d9e164	694	/** Create a TextLCD interface for using regular mbed pins
wim	21:9eb628d9e164	695	*
wim	21:9eb628d9e164	696	* @param rs Instruction/data control line
wim	21:9eb628d9e164	697	* @param e Enable line (clock)
wim	21:9eb628d9e164	698	* @param d4-d7 Data lines for using as a 4-bit interface
wim	21:9eb628d9e164	699	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	21:9eb628d9e164	700	* @param bl Backlight control line (optional, default = NC)
wim	21:9eb628d9e164	701	* @param e2 Enable2 line (clock for second controller, LCD40x4 only)
wim	21:9eb628d9e164	702	* @param ctrl LCD controller (default = HD44780)
wim	21:9eb628d9e164	703	*/
wim	21:9eb628d9e164	704	TextLCD(PinName rs, PinName e, PinName d4, PinName d5, PinName d6, PinName d7, LCDType type = LCD16x2, PinName bl = NC, PinName e2 = NC, LCDCtrl ctrl = HD44780);
wim	21:9eb628d9e164	705
wim	22:35742ec80c24	706	/** Destruct a TextLCD interface for using regular mbed pins
wim	22:35742ec80c24	707	*
wim	22:35742ec80c24	708	* @param none
wim	22:35742ec80c24	709	* @return none
wim	22:35742ec80c24	710	*/
wim	22:35742ec80c24	711	virtual ~TextLCD();
wim	22:35742ec80c24	712
wim	21:9eb628d9e164	713	private:
wim	29:a3663151aa65	714
wim	29:a3663151aa65	715	/** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
wim	29:a3663151aa65	716	* Set the Enable pin.
wim	29:a3663151aa65	717	*/
wim	21:9eb628d9e164	718	virtual void _setEnable(bool value);
wim	29:a3663151aa65	719
wim	29:a3663151aa65	720	/** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
wim	32:59c4b8f648d4	721	* Set the RS pin (0 = Command, 1 = Data).
wim	29:a3663151aa65	722	*/
wim	21:9eb628d9e164	723	virtual void _setRS(bool value);
wim	29:a3663151aa65	724
wim	29:a3663151aa65	725	/** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
wim	29:a3663151aa65	726	* Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim	29:a3663151aa65	727	*/
wim	21:9eb628d9e164	728	virtual void _setBL(bool value);
wim	29:a3663151aa65	729
wim	29:a3663151aa65	730	/** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
wim	29:a3663151aa65	731	* Set the databus value (4 bit).
wim	29:a3663151aa65	732	*/
wim	21:9eb628d9e164	733	virtual void _setData(int value);
wim	21:9eb628d9e164	734
wim	22:35742ec80c24	735	/** Regular mbed pins bus
wim	22:35742ec80c24	736	*/
wim	22:35742ec80c24	737	DigitalOut _rs, _e;
wim	22:35742ec80c24	738	BusOut _d;
wim	22:35742ec80c24	739
wim	22:35742ec80c24	740	/** Optional Hardware pins for the Backlight and LCD40x4 device
wim	22:35742ec80c24	741	* Default PinName value is NC, must be used as pointer to avoid issues with mbed lib and DigitalOut pins
wim	22:35742ec80c24	742	*/
wim	37:ce348c002929	743	DigitalOut _bl, _e2;
wim	21:9eb628d9e164	744	};
wim	21:9eb628d9e164	745
wim	23:d47f226efb24	746	//----------- End TextLCD ---------------
wim	21:9eb628d9e164	747
wim	21:9eb628d9e164	748
wim	23:d47f226efb24	749	//--------- Start TextLCD_I2C -----------
wim	34:e5a0dcb43ecc	750	#if(LCD_I2C == 1) /* I2C Expander PCF8574/MCP23008 */
wim	22:35742ec80c24	751
wim	26:bd897a001012	752	/** Create a TextLCD interface using an I2C PCF8574 (or PCF8574A) or MCP23008 portexpander
wim	21:9eb628d9e164	753	*
wim	21:9eb628d9e164	754	*/
wim	21:9eb628d9e164	755	class TextLCD_I2C : public TextLCD_Base {
wim	21:9eb628d9e164	756	public:
wim	26:bd897a001012	757	/** Create a TextLCD interface using an I2C PCF8574 (or PCF8574A) or MCP23008 portexpander
wim	21:9eb628d9e164	758	*
wim	21:9eb628d9e164	759	* @param i2c I2C Bus
wim	37:ce348c002929	760	* @param deviceAddress I2C slave address (PCF8574 (or PCF8574A) or MCP23008 portexpander, default = PCF8574_SA0 = 0x40)
wim	21:9eb628d9e164	761	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	21:9eb628d9e164	762	* @param ctrl LCD controller (default = HD44780)
wim	21:9eb628d9e164	763	*/
wim	26:bd897a001012	764	TextLCD_I2C(I2C *i2c, char deviceAddress = PCF8574_SA0, LCDType type = LCD16x2, LCDCtrl ctrl = HD44780);
wim	21:9eb628d9e164	765
wim	21:9eb628d9e164	766	private:
wim	29:a3663151aa65	767
wim	37:ce348c002929	768	/** Place the Enable bit in the databus shadowvalue
wim	37:ce348c002929	769	* Used for mbed I2C portexpander
wim	37:ce348c002929	770	* @param value data to write
wim	37:ce348c002929	771	* @return none
wim	37:ce348c002929	772	*/
wim	37:ce348c002929	773	void _setEnableBit(bool value);
wim	37:ce348c002929	774
wim	29:a3663151aa65	775	/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim	29:a3663151aa65	776	* Set the Enable pin.
wim	29:a3663151aa65	777	*/
wim	21:9eb628d9e164	778	virtual void _setEnable(bool value);
wim	29:a3663151aa65	779
wim	29:a3663151aa65	780	/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim	32:59c4b8f648d4	781	* Set the RS pin (0 = Command, 1 = Data).
wim	29:a3663151aa65	782	*/
wim	21:9eb628d9e164	783	virtual void _setRS(bool value);
wim	29:a3663151aa65	784
wim	29:a3663151aa65	785	/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim	29:a3663151aa65	786	* Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim	29:a3663151aa65	787	*/
wim	21:9eb628d9e164	788	virtual void _setBL(bool value);
wim	29:a3663151aa65	789
wim	37:ce348c002929	790	/** Place the 4bit data in the databus shadowvalue
wim	37:ce348c002929	791	* Used for mbed I2C portexpander
wim	37:ce348c002929	792	* @param value data to write
wim	37:ce348c002929	793	* @return none
wim	37:ce348c002929	794	*/
wim	37:ce348c002929	795	void _setDataBits(int value);
wim	37:ce348c002929	796
wim	29:a3663151aa65	797	/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim	29:a3663151aa65	798	* Set the databus value (4 bit).
wim	29:a3663151aa65	799	*/
wim	29:a3663151aa65	800	virtual void _setData(int value);
wim	37:ce348c002929	801
wim	37:ce348c002929	802	//New optimized
wim	37:ce348c002929	803	//Test faster _writeByte 0.11s vs 0.27s for a 20x4 fillscreen (PCF8574)
wim	37:ce348c002929	804	//Test faster _writeByte 0.14s vs 0.34s for a 20x4 fillscreen (MCP23008)
wim	37:ce348c002929	805
wim	37:ce348c002929	806	/** Low level writes to LCD serial bus expander
wim	37:ce348c002929	807	*/
wim	37:ce348c002929	808	virtual void _writeByte(int value);
wim	37:ce348c002929	809
wim	29:a3663151aa65	810	/** Write data to MCP23008 I2C portexpander
wim	29:a3663151aa65	811	* @param reg register to write
wim	29:a3663151aa65	812	* @param value data to write
wim	29:a3663151aa65	813	* @return none
wim	29:a3663151aa65	814	*/
wim	37:ce348c002929	815	void _writeRegister (int reg, int value);
wim	21:9eb628d9e164	816
wim	21:9eb628d9e164	817	//I2C bus
wim	21:9eb628d9e164	818	I2C *_i2c;
wim	21:9eb628d9e164	819	char _slaveAddress;
wim	21:9eb628d9e164	820
wim	37:ce348c002929	821	// Internal bus shadow value for serial bus only
wim	30:033048611c01	822	char _lcd_bus;
wim	21:9eb628d9e164	823	};
wim	34:e5a0dcb43ecc	824	#endif /* I2C Expander PCF8574/MCP23008 */
wim	21:9eb628d9e164	825
wim	23:d47f226efb24	826	//---------- End TextLCD_I2C ------------
wim	22:35742ec80c24	827
wim	22:35742ec80c24	828
wim	23:d47f226efb24	829	//--------- Start TextLCD_SPI -----------
wim	34:e5a0dcb43ecc	830	#if(LCD_SPI == 1) /* SPI Expander SN74595 */
wim	22:35742ec80c24	831
wim	21:9eb628d9e164	832	/** Create a TextLCD interface using an SPI 74595 portexpander
wim	21:9eb628d9e164	833	*
wim	21:9eb628d9e164	834	*/
wim	21:9eb628d9e164	835	class TextLCD_SPI : public TextLCD_Base {
wim	21:9eb628d9e164	836	public:
wim	21:9eb628d9e164	837	/** Create a TextLCD interface using an SPI 74595 portexpander
wim	21:9eb628d9e164	838	*
wim	21:9eb628d9e164	839	* @param spi SPI Bus
wim	21:9eb628d9e164	840	* @param cs chip select pin (active low)
wim	21:9eb628d9e164	841	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	21:9eb628d9e164	842	* @param ctrl LCD controller (default = HD44780)
wim	21:9eb628d9e164	843	*/
wim	21:9eb628d9e164	844	TextLCD_SPI(SPI *spi, PinName cs, LCDType type = LCD16x2, LCDCtrl ctrl = HD44780);
wim	21:9eb628d9e164	845
wim	21:9eb628d9e164	846	private:
wim	29:a3663151aa65	847
wim	29:a3663151aa65	848	/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim	29:a3663151aa65	849	* Set the Enable pin.
wim	29:a3663151aa65	850	*/
wim	21:9eb628d9e164	851	virtual void _setEnable(bool value);
wim	29:a3663151aa65	852
wim	29:a3663151aa65	853	/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim	32:59c4b8f648d4	854	* Set the RS pin (0 = Command, 1 = Data).
wim	29:a3663151aa65	855	*/
wim	21:9eb628d9e164	856	virtual void _setRS(bool value);
wim	29:a3663151aa65	857
wim	29:a3663151aa65	858	/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim	29:a3663151aa65	859	* Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim	29:a3663151aa65	860	*/
wim	21:9eb628d9e164	861	virtual void _setBL(bool value);
wim	29:a3663151aa65	862
wim	29:a3663151aa65	863	/** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim	29:a3663151aa65	864	* Set the databus value (4 bit).
wim	29:a3663151aa65	865	*/
wim	37:ce348c002929	866	virtual void _setData(int value);
wim	21:9eb628d9e164	867
wim	21:9eb628d9e164	868	// SPI bus
wim	21:9eb628d9e164	869	SPI *_spi;
wim	21:9eb628d9e164	870	DigitalOut _cs;
wim	21:9eb628d9e164	871
wim	37:ce348c002929	872	// Internal bus shadow value for serial bus only
wim	21:9eb628d9e164	873	char _lcd_bus;
wim	21:9eb628d9e164	874	};
wim	34:e5a0dcb43ecc	875	#endif /* SPI Expander SN74595 */
wim	23:d47f226efb24	876	//---------- End TextLCD_SPI ------------
wim	21:9eb628d9e164	877
Sissors	24:fb3399713710	878
wim	37:ce348c002929	879	//--------- Start TextLCD_I2C_N -----------
wim	37:ce348c002929	880	#if(LCD_I2C_N == 1) /* Native I2C */
wim	37:ce348c002929	881
wim	37:ce348c002929	882	/** Create a TextLCD interface using a controller with native I2C interface
wim	37:ce348c002929	883	*
wim	37:ce348c002929	884	*/
wim	37:ce348c002929	885	class TextLCD_I2C_N : public TextLCD_Base {
wim	37:ce348c002929	886	public:
wim	37:ce348c002929	887	/** Create a TextLCD interface using a controller with native I2C interface
wim	37:ce348c002929	888	*
wim	37:ce348c002929	889	* @param i2c I2C Bus
wim	37:ce348c002929	890	* @param deviceAddress I2C slave address (default = ST7032_SA = 0x7C)
wim	37:ce348c002929	891	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	37:ce348c002929	892	* @param bl Backlight control line (optional, default = NC)
wim	37:ce348c002929	893	* @param ctrl LCD controller (default = ST7032_3V3)
wim	37:ce348c002929	894	*/
wim	37:ce348c002929	895	TextLCD_I2C_N(I2C *i2c, char deviceAddress = ST7032_SA, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = ST7032_3V3);
wim	37:ce348c002929	896
wim	37:ce348c002929	897	/** Destruct a TextLCD interface using a controller with native I2C interface
wim	37:ce348c002929	898	*/
wim	37:ce348c002929	899	virtual ~TextLCD_I2C_N(void);
wim	37:ce348c002929	900
wim	37:ce348c002929	901	private:
wim	37:ce348c002929	902
wim	37:ce348c002929	903	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	37:ce348c002929	904	* Set the Enable pin.
wim	37:ce348c002929	905	*/
wim	37:ce348c002929	906	virtual void _setEnable(bool value);
wim	37:ce348c002929	907
wim	37:ce348c002929	908	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	37:ce348c002929	909	* Set the RS pin ( 0 = Command, 1 = Data).
wim	37:ce348c002929	910	*/
wim	37:ce348c002929	911	virtual void _setRS(bool value);
wim	37:ce348c002929	912
wim	37:ce348c002929	913	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	37:ce348c002929	914	* Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim	37:ce348c002929	915	*/
wim	37:ce348c002929	916	virtual void _setBL(bool value);
wim	37:ce348c002929	917
wim	37:ce348c002929	918	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	37:ce348c002929	919	* Set the databus value (4 bit).
wim	37:ce348c002929	920	*/
wim	37:ce348c002929	921	virtual void _setData(int value);
wim	37:ce348c002929	922
wim	37:ce348c002929	923	/** Low level writes to LCD serial bus only (serial native)
wim	37:ce348c002929	924	*/
wim	37:ce348c002929	925	virtual void _writeByte(int value);
wim	37:ce348c002929	926
wim	37:ce348c002929	927	//I2C bus
wim	37:ce348c002929	928	I2C *_i2c;
wim	37:ce348c002929	929	char _slaveAddress;
wim	37:ce348c002929	930
wim	37:ce348c002929	931	// controlbyte to select between data and command. Internal shadow value for serial bus only
wim	37:ce348c002929	932	char _controlbyte;
wim	37:ce348c002929	933
wim	37:ce348c002929	934	//Backlight
wim	37:ce348c002929	935	DigitalOut *_bl;
wim	37:ce348c002929	936
wim	37:ce348c002929	937	};
wim	37:ce348c002929	938	#endif /* Native I2C */
wim	37:ce348c002929	939	//---------- End TextLCD_I2C_N ------------
wim	37:ce348c002929	940
wim	37:ce348c002929	941
wim	26:bd897a001012	942	//--------- Start TextLCD_SPI_N -----------
wim	34:e5a0dcb43ecc	943	#if(LCD_SPI_N == 1) /* Native SPI bus */
Sissors	24:fb3399713710	944
wim	30:033048611c01	945	/** Create a TextLCD interface using a controller with native SPI4 interface
Sissors	24:fb3399713710	946	*
Sissors	24:fb3399713710	947	*/
wim	25:6162b31128c9	948	class TextLCD_SPI_N : public TextLCD_Base {
Sissors	24:fb3399713710	949	public:
wim	30:033048611c01	950	/** Create a TextLCD interface using a controller with native SPI4 interface
Sissors	24:fb3399713710	951	*
Sissors	24:fb3399713710	952	* @param spi SPI Bus
Sissors	24:fb3399713710	953	* @param cs chip select pin (active low)
Sissors	24:fb3399713710	954	* @param rs Instruction/data control line
Sissors	24:fb3399713710	955	* @param type Sets the panel size/addressing mode (default = LCD16x2)
Sissors	24:fb3399713710	956	* @param bl Backlight control line (optional, default = NC)
wim	26:bd897a001012	957	* @param ctrl LCD controller (default = ST7032_3V3)
Sissors	24:fb3399713710	958	*/
wim	26:bd897a001012	959	TextLCD_SPI_N(SPI *spi, PinName cs, PinName rs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = ST7032_3V3);
wim	37:ce348c002929	960
wim	37:ce348c002929	961	/** Destruct a TextLCD interface using a controller with native SPI4 interface
wim	37:ce348c002929	962	*/
wim	25:6162b31128c9	963	virtual ~TextLCD_SPI_N(void);
Sissors	24:fb3399713710	964
Sissors	24:fb3399713710	965	private:
wim	29:a3663151aa65	966
wim	29:a3663151aa65	967	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	29:a3663151aa65	968	* Set the Enable pin.
wim	29:a3663151aa65	969	*/
Sissors	24:fb3399713710	970	virtual void _setEnable(bool value);
wim	29:a3663151aa65	971
wim	29:a3663151aa65	972	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	32:59c4b8f648d4	973	* Set the RS pin (0 = Command, 1 = Data).
wim	29:a3663151aa65	974	*/
Sissors	24:fb3399713710	975	virtual void _setRS(bool value);
wim	29:a3663151aa65	976
wim	29:a3663151aa65	977	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	29:a3663151aa65	978	* Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim	29:a3663151aa65	979	*/
Sissors	24:fb3399713710	980	virtual void _setBL(bool value);
wim	29:a3663151aa65	981
wim	29:a3663151aa65	982	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	29:a3663151aa65	983	* Set the databus value (4 bit).
wim	29:a3663151aa65	984	*/
Sissors	24:fb3399713710	985	virtual void _setData(int value);
wim	29:a3663151aa65	986
wim	29:a3663151aa65	987	/** Low level writes to LCD serial bus only (serial native)
wim	29:a3663151aa65	988	*/
Sissors	24:fb3399713710	989	virtual void _writeByte(int value);
Sissors	24:fb3399713710	990
Sissors	24:fb3399713710	991	// SPI bus
Sissors	24:fb3399713710	992	SPI *_spi;
Sissors	24:fb3399713710	993	DigitalOut _cs;
Sissors	24:fb3399713710	994	DigitalOut _rs;
wim	30:033048611c01	995
wim	30:033048611c01	996	//Backlight
Sissors	24:fb3399713710	997	DigitalOut *_bl;
Sissors	24:fb3399713710	998	};
wim	34:e5a0dcb43ecc	999	#endif /* Native SPI bus */
wim	25:6162b31128c9	1000	//---------- End TextLCD_SPI_N ------------
Sissors	24:fb3399713710	1001
wim	26:bd897a001012	1002
wim	36:9f5f86dfd44a	1003	//-------- Start TextLCD_SPI_N_3_8 --------
wim	36:9f5f86dfd44a	1004	#if(LCD_SPI_N_3_8 == 1) /* Native SPI bus */
wim	37:ce348c002929	1005	/** Create a TextLCD interface using a controller with native SPI3 8 bits interface
wim	37:ce348c002929	1006	* This mode is supported by ST7070.
wim	37:ce348c002929	1007	*
wim	37:ce348c002929	1008	*/
wim	36:9f5f86dfd44a	1009	class TextLCD_SPI_N_3_8 : public TextLCD_Base {
wim	36:9f5f86dfd44a	1010	public:
wim	36:9f5f86dfd44a	1011	/** Create a TextLCD interface using a controller with a native SPI3 8 bits interface
wim	36:9f5f86dfd44a	1012	* This mode is supported by ST7070. Note that implementation in TexTLCD is not very efficient due to
wim	36:9f5f86dfd44a	1013	* structure of the TextLCD library: each databyte is written separately and requires a separate 'count command' set to 1 byte.
wim	36:9f5f86dfd44a	1014	*
wim	36:9f5f86dfd44a	1015	* @param spi SPI Bus
wim	36:9f5f86dfd44a	1016	* @param cs chip select pin (active low)
wim	36:9f5f86dfd44a	1017	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	36:9f5f86dfd44a	1018	* @param bl Backlight control line (optional, default = NC)
wim	36:9f5f86dfd44a	1019	* @param ctrl LCD controller (default = ST7070)
wim	36:9f5f86dfd44a	1020	*/
wim	36:9f5f86dfd44a	1021	TextLCD_SPI_N_3_8(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = ST7070);
wim	36:9f5f86dfd44a	1022
wim	37:ce348c002929	1023	/** Destruct a TextLCD interface using a controller with native SPI3_8 interface
wim	37:ce348c002929	1024	*/
wim	36:9f5f86dfd44a	1025	virtual ~TextLCD_SPI_N_3_8(void);
wim	36:9f5f86dfd44a	1026
wim	36:9f5f86dfd44a	1027	private:
wim	36:9f5f86dfd44a	1028
wim	36:9f5f86dfd44a	1029	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	36:9f5f86dfd44a	1030	* Set the Enable pin.
wim	36:9f5f86dfd44a	1031	*/
wim	36:9f5f86dfd44a	1032	virtual void _setEnable(bool value);
wim	36:9f5f86dfd44a	1033
wim	36:9f5f86dfd44a	1034	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	36:9f5f86dfd44a	1035	* Set the RS pin (0 = Command, 1 = Data).
wim	36:9f5f86dfd44a	1036	*/
wim	36:9f5f86dfd44a	1037	virtual void _setRS(bool value);
wim	36:9f5f86dfd44a	1038
wim	36:9f5f86dfd44a	1039	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	36:9f5f86dfd44a	1040	* Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim	36:9f5f86dfd44a	1041	*/
wim	36:9f5f86dfd44a	1042	virtual void _setBL(bool value);
wim	36:9f5f86dfd44a	1043
wim	36:9f5f86dfd44a	1044	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	36:9f5f86dfd44a	1045	* Set the databus value (4 bit).
wim	36:9f5f86dfd44a	1046	*/
wim	36:9f5f86dfd44a	1047	virtual void _setData(int value);
wim	36:9f5f86dfd44a	1048
wim	36:9f5f86dfd44a	1049	/** Low level writes to LCD serial bus only (serial native)
wim	36:9f5f86dfd44a	1050	*/
wim	36:9f5f86dfd44a	1051	virtual void _writeByte(int value);
wim	36:9f5f86dfd44a	1052
wim	36:9f5f86dfd44a	1053	// SPI bus
wim	36:9f5f86dfd44a	1054	SPI *_spi;
wim	36:9f5f86dfd44a	1055	DigitalOut _cs;
wim	36:9f5f86dfd44a	1056
wim	37:ce348c002929	1057	// controlbyte to select between data and command. Internal shadow value for serial bus only
wim	36:9f5f86dfd44a	1058	char _controlbyte;
wim	36:9f5f86dfd44a	1059
wim	36:9f5f86dfd44a	1060	//Backlight
wim	36:9f5f86dfd44a	1061	DigitalOut *_bl;
wim	36:9f5f86dfd44a	1062	};
wim	36:9f5f86dfd44a	1063
wim	36:9f5f86dfd44a	1064	#endif /* Native SPI bus */
wim	36:9f5f86dfd44a	1065	//------- End TextLCD_SPI_N_3_8 -----------
wim	36:9f5f86dfd44a	1066
wim	36:9f5f86dfd44a	1067
wim	34:e5a0dcb43ecc	1068	//------- Start TextLCD_SPI_N_3_9 ---------
wim	34:e5a0dcb43ecc	1069	#if(LCD_SPI_N_3_9 == 1) /* Native SPI bus */
wim	30:033048611c01	1070	//Code checked out on logic analyser. Not yet tested on hardware..
wim	30:033048611c01	1071
wim	30:033048611c01	1072	/** Create a TextLCD interface using a controller with native SPI3 9 bits interface
wim	30:033048611c01	1073	* Note: current mbed libs only support SPI 9 bit mode for NXP platforms
wim	30:033048611c01	1074	*
wim	30:033048611c01	1075	*/
wim	30:033048611c01	1076	class TextLCD_SPI_N_3_9 : public TextLCD_Base {
wim	30:033048611c01	1077	public:
wim	30:033048611c01	1078	/** Create a TextLCD interface using a controller with native SPI3 9 bits interface
wim	30:033048611c01	1079	* Note: current mbed libs only support SPI 9 bit mode for NXP platforms
wim	30:033048611c01	1080	*
wim	30:033048611c01	1081	* @param spi SPI Bus
wim	30:033048611c01	1082	* @param cs chip select pin (active low)
wim	30:033048611c01	1083	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	30:033048611c01	1084	* @param bl Backlight control line (optional, default = NC)
wim	30:033048611c01	1085	* @param ctrl LCD controller (default = AIP31068)
wim	30:033048611c01	1086	*/
wim	30:033048611c01	1087	TextLCD_SPI_N_3_9(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = AIP31068);
wim	37:ce348c002929	1088
wim	37:ce348c002929	1089	/** Destruct a TextLCD interface using a controller with native SPI3_9 interface
wim	37:ce348c002929	1090	*/
wim	30:033048611c01	1091	virtual ~TextLCD_SPI_N_3_9(void);
wim	30:033048611c01	1092
wim	30:033048611c01	1093	private:
wim	30:033048611c01	1094
wim	30:033048611c01	1095	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	30:033048611c01	1096	* Set the Enable pin.
wim	30:033048611c01	1097	*/
wim	30:033048611c01	1098	virtual void _setEnable(bool value);
wim	30:033048611c01	1099
wim	30:033048611c01	1100	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	32:59c4b8f648d4	1101	* Set the RS pin (0 = Command, 1 = Data).
wim	32:59c4b8f648d4	1102	*/
wim	32:59c4b8f648d4	1103	virtual void _setRS(bool value);
wim	32:59c4b8f648d4	1104
wim	32:59c4b8f648d4	1105	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	32:59c4b8f648d4	1106	* Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim	32:59c4b8f648d4	1107	*/
wim	32:59c4b8f648d4	1108	virtual void _setBL(bool value);
wim	32:59c4b8f648d4	1109
wim	32:59c4b8f648d4	1110	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	32:59c4b8f648d4	1111	* Set the databus value (4 bit).
wim	32:59c4b8f648d4	1112	*/
wim	32:59c4b8f648d4	1113	virtual void _setData(int value);
wim	32:59c4b8f648d4	1114
wim	32:59c4b8f648d4	1115	/** Low level writes to LCD serial bus only (serial native)
wim	32:59c4b8f648d4	1116	*/
wim	32:59c4b8f648d4	1117	virtual void _writeByte(int value);
wim	32:59c4b8f648d4	1118
wim	32:59c4b8f648d4	1119	// SPI bus
wim	32:59c4b8f648d4	1120	SPI *_spi;
wim	32:59c4b8f648d4	1121	DigitalOut _cs;
wim	32:59c4b8f648d4	1122
wim	37:ce348c002929	1123	// controlbyte to select between data and command. Internal shadow value for serial bus only
wim	32:59c4b8f648d4	1124	char _controlbyte;
wim	32:59c4b8f648d4	1125
wim	32:59c4b8f648d4	1126	//Backlight
wim	32:59c4b8f648d4	1127	DigitalOut *_bl;
wim	32:59c4b8f648d4	1128	};
wim	34:e5a0dcb43ecc	1129	#endif /* Native SPI bus */
wim	32:59c4b8f648d4	1130	//-------- End TextLCD_SPI_N_3_9 ----------
wim	32:59c4b8f648d4	1131
wim	32:59c4b8f648d4	1132
wim	32:59c4b8f648d4	1133	//------- Start TextLCD_SPI_N_3_10 ---------
wim	34:e5a0dcb43ecc	1134	#if(LCD_SPI_N_3_10 == 1) /* Native SPI bus */
wim	32:59c4b8f648d4	1135
wim	32:59c4b8f648d4	1136	/** Create a TextLCD interface using a controller with native SPI3 10 bits interface
wim	32:59c4b8f648d4	1137	* Note: current mbed libs only support SPI 10 bit mode for NXP platforms
wim	32:59c4b8f648d4	1138	*
wim	32:59c4b8f648d4	1139	*/
wim	32:59c4b8f648d4	1140	class TextLCD_SPI_N_3_10 : public TextLCD_Base {
wim	32:59c4b8f648d4	1141	public:
wim	32:59c4b8f648d4	1142	/** Create a TextLCD interface using a controller with native SPI3 10 bits interface
wim	32:59c4b8f648d4	1143	* Note: current mbed libs only support SPI 10 bit mode for NXP platforms
wim	32:59c4b8f648d4	1144	*
wim	32:59c4b8f648d4	1145	* @param spi SPI Bus
wim	32:59c4b8f648d4	1146	* @param cs chip select pin (active low)
wim	32:59c4b8f648d4	1147	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	32:59c4b8f648d4	1148	* @param bl Backlight control line (optional, default = NC)
wim	32:59c4b8f648d4	1149	* @param ctrl LCD controller (default = AIP31068)
wim	32:59c4b8f648d4	1150	*/
wim	32:59c4b8f648d4	1151	TextLCD_SPI_N_3_10(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = AIP31068);
wim	37:ce348c002929	1152
wim	37:ce348c002929	1153	/** Destruct a TextLCD interface using a controller with native SPI3_10 interface
wim	37:ce348c002929	1154	*/
wim	32:59c4b8f648d4	1155	virtual ~TextLCD_SPI_N_3_10(void);
wim	32:59c4b8f648d4	1156
wim	32:59c4b8f648d4	1157	private:
wim	32:59c4b8f648d4	1158
wim	32:59c4b8f648d4	1159	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	32:59c4b8f648d4	1160	* Set the Enable pin.
wim	32:59c4b8f648d4	1161	*/
wim	32:59c4b8f648d4	1162	virtual void _setEnable(bool value);
wim	32:59c4b8f648d4	1163
wim	32:59c4b8f648d4	1164	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	32:59c4b8f648d4	1165	* Set the RS pin (0 = Command, 1 = Data).
wim	32:59c4b8f648d4	1166	*/
wim	32:59c4b8f648d4	1167	virtual void _setRS(bool value);
wim	32:59c4b8f648d4	1168
wim	32:59c4b8f648d4	1169	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	32:59c4b8f648d4	1170	* Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim	32:59c4b8f648d4	1171	*/
wim	32:59c4b8f648d4	1172	virtual void _setBL(bool value);
wim	32:59c4b8f648d4	1173
wim	32:59c4b8f648d4	1174	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	32:59c4b8f648d4	1175	* Set the databus value (4 bit).
wim	32:59c4b8f648d4	1176	*/
wim	32:59c4b8f648d4	1177	virtual void _setData(int value);
wim	32:59c4b8f648d4	1178
wim	32:59c4b8f648d4	1179	/** Low level writes to LCD serial bus only (serial native)
wim	32:59c4b8f648d4	1180	*/
wim	32:59c4b8f648d4	1181	virtual void _writeByte(int value);
wim	32:59c4b8f648d4	1182
wim	32:59c4b8f648d4	1183	// SPI bus
wim	32:59c4b8f648d4	1184	SPI *_spi;
wim	32:59c4b8f648d4	1185	DigitalOut _cs;
wim	36:9f5f86dfd44a	1186
wim	37:ce348c002929	1187	// controlbyte to select between data and command. Internal shadow value for serial bus only
wim	32:59c4b8f648d4	1188	char _controlbyte;
wim	32:59c4b8f648d4	1189
wim	32:59c4b8f648d4	1190	//Backlight
wim	32:59c4b8f648d4	1191	DigitalOut *_bl;
wim	32:59c4b8f648d4	1192	};
wim	32:59c4b8f648d4	1193
wim	34:e5a0dcb43ecc	1194	#endif /* Native SPI bus */
wim	32:59c4b8f648d4	1195	//-------- End TextLCD_SPI_N_3_10 ----------
wim	32:59c4b8f648d4	1196
wim	32:59c4b8f648d4	1197
wim	32:59c4b8f648d4	1198	//------- Start TextLCD_SPI_N_3_16 ---------
wim	34:e5a0dcb43ecc	1199	#if(LCD_SPI_N_3_16 == 1) /* Native SPI bus */
wim	32:59c4b8f648d4	1200
wim	32:59c4b8f648d4	1201	/** Create a TextLCD interface using a controller with native SPI3 16 bits interface
wim	32:59c4b8f648d4	1202	*
wim	32:59c4b8f648d4	1203	*/
wim	32:59c4b8f648d4	1204	class TextLCD_SPI_N_3_16 : public TextLCD_Base {
wim	32:59c4b8f648d4	1205	public:
wim	32:59c4b8f648d4	1206	/** Create a TextLCD interface using a controller with native SPI3 16 bits interface
wim	32:59c4b8f648d4	1207	*
wim	32:59c4b8f648d4	1208	* @param spi SPI Bus
wim	32:59c4b8f648d4	1209	* @param cs chip select pin (active low)
wim	32:59c4b8f648d4	1210	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	32:59c4b8f648d4	1211	* @param bl Backlight control line (optional, default = NC)
wim	32:59c4b8f648d4	1212	* @param ctrl LCD controller (default = PT6314)
wim	32:59c4b8f648d4	1213	*/
wim	32:59c4b8f648d4	1214	TextLCD_SPI_N_3_16(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = PT6314);
wim	37:ce348c002929	1215
wim	37:ce348c002929	1216	/** Destruct a TextLCD interface using a controller with native SPI3_16 interface
wim	37:ce348c002929	1217	*/
wim	32:59c4b8f648d4	1218	virtual ~TextLCD_SPI_N_3_16(void);
wim	32:59c4b8f648d4	1219
wim	32:59c4b8f648d4	1220	private:
wim	32:59c4b8f648d4	1221
wim	32:59c4b8f648d4	1222	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	32:59c4b8f648d4	1223	* Set the Enable pin.
wim	32:59c4b8f648d4	1224	*/
wim	32:59c4b8f648d4	1225	virtual void _setEnable(bool value);
wim	32:59c4b8f648d4	1226
wim	32:59c4b8f648d4	1227	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	32:59c4b8f648d4	1228	* Set the RS pin (0 = Command, 1 = Data).
wim	30:033048611c01	1229	*/
wim	30:033048611c01	1230	virtual void _setRS(bool value);
wim	30:033048611c01	1231
wim	30:033048611c01	1232	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	30:033048611c01	1233	* Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim	30:033048611c01	1234	*/
wim	30:033048611c01	1235	virtual void _setBL(bool value);
wim	30:033048611c01	1236
wim	30:033048611c01	1237	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	30:033048611c01	1238	* Set the databus value (4 bit).
wim	30:033048611c01	1239	*/
wim	30:033048611c01	1240	virtual void _setData(int value);
wim	30:033048611c01	1241
wim	30:033048611c01	1242	/** Low level writes to LCD serial bus only (serial native)
wim	30:033048611c01	1243	*/
wim	30:033048611c01	1244	virtual void _writeByte(int value);
wim	30:033048611c01	1245
wim	30:033048611c01	1246	// SPI bus
wim	30:033048611c01	1247	SPI *_spi;
wim	30:033048611c01	1248	DigitalOut _cs;
wim	30:033048611c01	1249
wim	37:ce348c002929	1250	// controlbyte to select between data and command. Internal shadow value for serial bus only
wim	30:033048611c01	1251	char _controlbyte;
wim	30:033048611c01	1252
wim	30:033048611c01	1253	//Backlight
wim	30:033048611c01	1254	DigitalOut *_bl;
wim	30:033048611c01	1255	};
wim	34:e5a0dcb43ecc	1256	#endif /* Native SPI bus */
wim	32:59c4b8f648d4	1257	//-------- End TextLCD_SPI_N_3_16 ----------
wim	34:e5a0dcb43ecc	1258
wim	30:033048611c01	1259
wim	32:59c4b8f648d4	1260	//------- Start TextLCD_SPI_N_3_24 ---------
wim	34:e5a0dcb43ecc	1261	#if(LCD_SPI_N_3_24 == 1) /* Native SPI bus */
wim	30:033048611c01	1262
wim	32:59c4b8f648d4	1263	/** Create a TextLCD interface using a controller with native SPI3 24 bits interface
wim	32:59c4b8f648d4	1264	* Note: lib uses SPI 8 bit mode
wim	30:033048611c01	1265	*
wim	30:033048611c01	1266	*/
wim	32:59c4b8f648d4	1267	class TextLCD_SPI_N_3_24 : public TextLCD_Base {
wim	30:033048611c01	1268	public:
wim	32:59c4b8f648d4	1269	/** Create a TextLCD interface using a controller with native SPI3 24 bits interface
wim	32:59c4b8f648d4	1270	* Note: lib uses SPI 8 bit mode
wim	30:033048611c01	1271	*
wim	30:033048611c01	1272	* @param spi SPI Bus
wim	30:033048611c01	1273	* @param cs chip select pin (active low)
wim	30:033048611c01	1274	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	30:033048611c01	1275	* @param bl Backlight control line (optional, default = NC)
wim	32:59c4b8f648d4	1276	* @param ctrl LCD controller (default = SSD1803)
wim	30:033048611c01	1277	*/
wim	32:59c4b8f648d4	1278	TextLCD_SPI_N_3_24(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = SSD1803_3V3);
wim	37:ce348c002929	1279
wim	37:ce348c002929	1280	/** Destruct a TextLCD interface using a controller with native SPI3_24 interface
wim	37:ce348c002929	1281	*/
wim	32:59c4b8f648d4	1282	virtual ~TextLCD_SPI_N_3_24(void);
wim	30:033048611c01	1283
wim	30:033048611c01	1284	private:
wim	30:033048611c01	1285
wim	30:033048611c01	1286	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	30:033048611c01	1287	* Set the Enable pin.
wim	30:033048611c01	1288	*/
wim	30:033048611c01	1289	virtual void _setEnable(bool value);
wim	30:033048611c01	1290
wim	30:033048611c01	1291	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	32:59c4b8f648d4	1292	* Set the RS pin (0 = Command, 1 = Data).
wim	30:033048611c01	1293	*/
wim	30:033048611c01	1294	virtual void _setRS(bool value);
wim	30:033048611c01	1295
wim	30:033048611c01	1296	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	30:033048611c01	1297	* Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim	30:033048611c01	1298	*/
wim	30:033048611c01	1299	virtual void _setBL(bool value);
wim	30:033048611c01	1300
wim	30:033048611c01	1301	/** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim	30:033048611c01	1302	* Set the databus value (4 bit).
wim	30:033048611c01	1303	*/
wim	30:033048611c01	1304	virtual void _setData(int value);
wim	30:033048611c01	1305
wim	30:033048611c01	1306	/** Low level writes to LCD serial bus only (serial native)
wim	30:033048611c01	1307	*/
wim	30:033048611c01	1308	virtual void _writeByte(int value);
wim	30:033048611c01	1309
wim	30:033048611c01	1310	// SPI bus
wim	30:033048611c01	1311	SPI *_spi;
wim	30:033048611c01	1312	DigitalOut _cs;
wim	30:033048611c01	1313
wim	30:033048611c01	1314	// controlbyte to select between data and command. Internal value for serial bus only
wim	30:033048611c01	1315	char _controlbyte;
wim	30:033048611c01	1316
wim	30:033048611c01	1317	//Backlight
wim	30:033048611c01	1318	DigitalOut *_bl;
wim	30:033048611c01	1319	};
wim	34:e5a0dcb43ecc	1320	#endif /* Native SPI bus */
wim	32:59c4b8f648d4	1321	//-------- End TextLCD_SPI_N_3_24 ----------
wim	30:033048611c01	1322
wim	38:cbe275b0b647	1323
simon	1:ac48b187213c	1324	#endif

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	16 Jan 2017
Imports:	2
Forks:	0
Commits:	43
Dependents:	1
Dependencies:	0
Followers:	1

TextLCD.h@41:111ca62e8a59, 2015-11-06 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning