![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
kom op
Diff: main.cpp
- Revision:
- 0:921402a95675
- Child:
- 1:7969189824ff
diff -r 000000000000 -r 921402a95675 main.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Wed Nov 01 16:16:04 2017 +0000 @@ -0,0 +1,126 @@ +#include "mbed.h" +#include "Serial.h" +#include "math.h" +#include "QEI.h" + +Serial pc(USBTX, USBRX); //Serial PC connectie +DigitalOut motor1DirectionPin(D4); //Motorrichting op D4 (connected op het bord) +PwmOut motor1MagnitudePin(D5); //Motorkracht op D5 (connected op het bord) +DigitalOut motor2DirectionPin(D7); //Motorrichting op D4 (connected op het bord) +PwmOut motor2MagnitudePin(D6); //Motorkracht op D5 (connected op het bord) +QEI q1_enc(D13, D12, NC, 32); //encoder motor 1 instellen +QEI q2_enc(D11, D10, NC, 32); // encoder motor 2 instellen +const double pi = 3.1415926535897; // waarde voor pi aanmaken + +Timer t; +Ticker aansturing; +Ticker stepres; + +double ref1 = 0; +double refrad1; +double refrad2; +double ref2 = 0; +double Kp1 = 0.002; //kp motor 2 = 0.0001 +double Ki1 = 0; +double Kp2 = 0.0001; +double Ki2 = 0; +int q1_puls; +int q2_puls; +double rad2pulses=4200/(2*pi); +double ts = 0.001; +double PI1; +int n; + +double error1_1; +double error2_1 = 0; +double error_I_1; +double error_I2_1 = 0; +double error1_2; +double error2_2 = 0; +double error_I_2; +double error_I2_2 = 0; +double PI2; + +void controller() +{ + refrad2 = 1.57f*sin(t.read()); //motor 2 + ref2 = refrad2 * rad2pulses; + refrad1 = -0.6f*cos(t.read()) + 0.2f; //motor 1 + ref1 = refrad2 * rad2pulses; + + // encoders uitlezen + q1_puls = q1_enc.getPulses(); + q2_puls = q2_enc.getPulses(); + + //PID 1 +error1_1 = ref1 - q1_puls; +error_I_1 = error_I2_1 + ts*((error1_1 + error2_1)/2); + +PI1 = Kp1*error1_1 + Ki1*error_I_1; + +error2_1 = error1_1; // opslaan variabelen voor integraal onderdeel +error_I2_1 = error_I_1; + + //PID 2 +error1_2 = ref2 - q2_puls; +error_I_2 = error_I2_2 + ts*((error1_2 + error2_2)/2); + +PI2 = Kp2*error1_2 + Ki2*(error_I_2); + + + if (PI1<=0) + { + motor1DirectionPin = 1; + motor1MagnitudePin = fabs(PI1); + } + else if (PI1>0) + { + motor1DirectionPin = 0; + motor1MagnitudePin = fabs(PI1); + } + + if (PI2>=0) + { + motor2DirectionPin = 1; + motor2MagnitudePin = fabs(PI2); + } + else if(PI2<0) + { + motor2DirectionPin = 0; + motor2MagnitudePin = fabs(PI2); + } + + if(n==500){ + printf("PI1 = %f\n\r", PI1); + n=0; + } + else{ + n=n+1; + } + +} + +void stapfunc() +{ + if (ref1==0){ + ref1 = 1000; + } + else if (ref1==1000) + { + ref1=0; + } +} + +int main() +{ + pc.baud(115200); + t.start(); + aansturing.attach_us(&controller, 1000); + //stepres.attach(&stapfunc, 3); + + while(true){ + + } + + +} \ No newline at end of file