added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
Diff: targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/port_api.c
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 50:a417edff4437
diff -r 423e1876dc07 -r ef7eb2e8f9f7 targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/port_api.c --- a/targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/port_api.c Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/port_api.c Fri Sep 02 15:07:44 2016 +0100 @@ -1,96 +1,89 @@ -/***************************************************************************//** - * @file port_api.c - ******************************************************************************* - * @section License - * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b> - ******************************************************************************* - * - * Permission is granted to anyone to use this software for any purpose, - * including commercial applications, and to alter it and redistribute it - * freely, subject to the following restrictions: - * - * 1. The origin of this software must not be misrepresented; you must not - * claim that you wrote the original software. - * 2. Altered source versions must be plainly marked as such, and must not be - * misrepresented as being the original software. - * 3. This notice may not be removed or altered from any source distribution. - * - * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no - * obligation to support this Software. Silicon Labs is providing the - * Software "AS IS", with no express or implied warranties of any kind, - * including, but not limited to, any implied warranties of merchantability - * or fitness for any particular purpose or warranties against infringement - * of any proprietary rights of a third party. - * - * Silicon Labs will not be liable for any consequential, incidental, or - * special damages, or any other relief, or for any claim by any third party, - * arising from your use of this Software. - * - ******************************************************************************/ - -#include "device.h" -#if DEVICE_PORTOUT - -#include "port_api.h" -#include "pinmap.h" -#include "gpio_api.h" -#include "em_gpio.h" -#include "em_cmu.h" - -#define PORT_NUM_PINS 16 - -PinName port_pin(PortName port, int pin_n) -{ - return (PinName) (pin_n | port << 4); // Encode pin and port number in one uint32 -} - -void port_init(port_t *obj, PortName port, int mask, PinDirection dir) -{ - obj->mask = mask; - obj->port = port; - obj->dir = dir; - - port_dir(obj, obj->dir); -} - -void port_mode(port_t *obj, PinMode mode) -{ - /* Set mode for pins given by mask */ - uint32_t pin; - for (pin = 0; pin < PORT_NUM_PINS; pin++) { - if (obj->mask & (1 << pin)) { - pin_mode(port_pin(obj->port, pin), mode); - } - } -} - -void port_dir(port_t *obj, PinDirection dir) -{ - obj->dir = dir; - - /* Set default pin mode for pins given by mask */ - switch (dir) { - case PIN_INPUT: - port_mode(obj, Input); - break; - case PIN_OUTPUT: - port_mode(obj, PushPull); - break; - } -} - -void port_write(port_t *obj, int value) -{ - GPIO_PortOutSetVal(obj->port, value, obj->mask); -} - -int port_read(port_t *obj) -{ - if (obj->dir == PIN_INPUT) { - return (int) (GPIO_PortInGet(obj->port) & obj->mask); - } else { - return (int) (GPIO_PortOutGet(obj->port) & obj->mask); - } -} - -#endif +/***************************************************************************//** + * @file port_api.c + ******************************************************************************* + * @section License + * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b> + ******************************************************************************* + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ + +#include "device.h" +#if DEVICE_PORTOUT + +#include "port_api.h" +#include "pinmap.h" +#include "gpio_api.h" +#include "em_gpio.h" +#include "em_cmu.h" + +#define PORT_NUM_PINS 16 + +PinName port_pin(PortName port, int pin_n) +{ + return (PinName) (pin_n | port << 4); // Encode pin and port number in one uint32 +} + +void port_init(port_t *obj, PortName port, int mask, PinDirection dir) +{ + obj->mask = mask; + obj->port = port; + obj->dir = dir; + + port_dir(obj, obj->dir); +} + +void port_mode(port_t *obj, PinMode mode) +{ + /* Set mode for pins given by mask */ + uint32_t pin; + for (pin = 0; pin < PORT_NUM_PINS; pin++) { + if (obj->mask & (1 << pin)) { + pin_mode(port_pin(obj->port, pin), mode); + } + } +} + +void port_dir(port_t *obj, PinDirection dir) +{ + obj->dir = dir; + + /* Set default pin mode for pins given by mask */ + switch (dir) { + case PIN_INPUT: + port_mode(obj, Input); + break; + case PIN_OUTPUT: + port_mode(obj, PushPull); + break; + } +} + +void port_write(port_t *obj, int value) +{ + GPIO_PortOutSetVal(obj->port, value, obj->mask); +} + +int port_read(port_t *obj) +{ + if (obj->dir == PIN_INPUT) { + return (int) (GPIO_PortInGet(obj->port) & obj->mask); + } else { + return (int) (GPIO_PortOutGet(obj->port) & obj->mask); + } +} + +#endif