added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
Diff: targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/gpio_api.c
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 50:a417edff4437
diff -r 423e1876dc07 -r ef7eb2e8f9f7 targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/gpio_api.c --- a/targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/gpio_api.c Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/gpio_api.c Fri Sep 02 15:07:44 2016 +0100 @@ -1,149 +1,142 @@ -/***************************************************************************//** - * @file gpio_api.c - ******************************************************************************* - * @section License - * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b> - ******************************************************************************* - * - * Permission is granted to anyone to use this software for any purpose, - * including commercial applications, and to alter it and redistribute it - * freely, subject to the following restrictions: - * - * 1. The origin of this software must not be misrepresented; you must not - * claim that you wrote the original software. - * 2. Altered source versions must be plainly marked as such, and must not be - * misrepresented as being the original software. - * 3. This notice may not be removed or altered from any source distribution. - * - * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no - * obligation to support this Software. Silicon Labs is providing the - * Software "AS IS", with no express or implied warranties of any kind, - * including, but not limited to, any implied warranties of merchantability - * or fitness for any particular purpose or warranties against infringement - * of any proprietary rights of a third party. - * - * Silicon Labs will not be liable for any consequential, incidental, or - * special damages, or any other relief, or for any claim by any third party, - * arising from your use of this Software. - * - ******************************************************************************/ - -#include "gpio_api.h" -#include "pinmap.h" -#include "em_cmu.h" -#include "mbed_assert.h" -#include "sleepmodes.h" - - -void gpio_write(gpio_t *obj, int value) -{ - if (value) { - GPIO_PinOutSet((GPIO_Port_TypeDef)(obj->pin >> 4 & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin - } else { - GPIO_PinOutClear((GPIO_Port_TypeDef)(obj->pin >> 4 & 0xF), obj->pin & 0xF); - } -} - -int gpio_read(gpio_t *obj) -{ - if (obj->dir == PIN_INPUT) { - return GPIO_PinInGet((GPIO_Port_TypeDef)(obj->pin >> 4 & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin - } else { - return GPIO_PinOutGet((GPIO_Port_TypeDef)(obj->pin >> 4 & 0xF), obj->pin & 0xF); - } -} - -int gpio_is_connected(const gpio_t *obj) -{ - return ((uint32_t)obj->pin | 0xFFFFFF00 ) != (uint32_t)((PinName)NC); -} - -/* - * @return the GPIO port mask for this pin - * Pin and port index encoded in one uint32. - * First four bits represent the pin number - * The remaining bits represent the pin mode - */ -uint32_t gpio_set(PinName pin) -{ - return 1 << ((uint32_t) pin & 0xF); -} - -void gpio_init(gpio_t *obj, PinName pin) -{ - MBED_ASSERT(pin != NC); - - CMU_ClockEnable(cmuClock_HFPER, true); - CMU_ClockEnable(cmuClock_GPIO, true); - obj->pin = pin; -} - -void gpio_mode(gpio_t *obj, PinMode mode) -{ - uint32_t pin = 1 << (obj->pin & 0xF); - uint32_t port = (obj->pin >> 4) & 0xF; - - if(obj->dir == PIN_INPUT) { - switch(mode) { - case PullDefault: - mode = Input; - break; - case PullUp: - mode = InputPullUp; - break; - case PullDown: - mode = InputPullDown; - break; - default: - break; - } - - //Handle DOUT setting - if((mode & 0x10) != 0) { - //Set DOUT -#ifdef _GPIO_P_DOUTSET_MASK - GPIO->P[port].DOUTSET = pin; -#else - GPIO->P[port].DOUT |= pin; -#endif - } else { - //Clear DOUT -#ifdef _GPIO_P_DOUTCLR_MASK - GPIO->P[port].DOUTCLR = pin; -#else - GPIO->P[port].DOUT &= ~pin; -#endif - } - } else { - switch(mode) { - case PullDefault: - mode = PushPull; - break; - case PullUp: - mode = WiredAndPullUp; - break; - case PullDown: - mode = WiredOrPullDown; - break; - default: - break; - } - } - - obj->mode = mode; // Update object - pin_mode(obj->pin, mode); // Update register -} - -// Used by DigitalInOut to set correct mode when direction is set -void gpio_dir(gpio_t *obj, PinDirection direction) -{ - obj->dir = direction; - switch (direction) { - case PIN_INPUT: - gpio_mode(obj, PullDefault); - break; - case PIN_OUTPUT: - gpio_mode(obj, PullNone); - break; - } -} +/***************************************************************************//** + * @file gpio_api.c + ******************************************************************************* + * @section License + * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b> + ******************************************************************************* + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ + +#include "gpio_api.h" +#include "pinmap.h" +#include "em_cmu.h" +#include "mbed_assert.h" +#include "sleepmodes.h" + + +void gpio_write(gpio_t *obj, int value) +{ + if (value) { + GPIO_PinOutSet((GPIO_Port_TypeDef)(obj->pin >> 4 & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin + } else { + GPIO_PinOutClear((GPIO_Port_TypeDef)(obj->pin >> 4 & 0xF), obj->pin & 0xF); + } +} + +int gpio_read(gpio_t *obj) +{ + if (obj->dir == PIN_INPUT) { + return GPIO_PinInGet((GPIO_Port_TypeDef)(obj->pin >> 4 & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin + } else { + return GPIO_PinOutGet((GPIO_Port_TypeDef)(obj->pin >> 4 & 0xF), obj->pin & 0xF); + } +} + +int gpio_is_connected(const gpio_t *obj) +{ + return ((uint32_t)obj->pin | 0xFFFFFF00 ) != (uint32_t)((PinName)NC); +} + +/* + * @return the GPIO port mask for this pin + * Pin and port index encoded in one uint32. + * First four bits represent the pin number + * The remaining bits represent the pin mode + */ +uint32_t gpio_set(PinName pin) +{ + return 1 << ((uint32_t) pin & 0xF); +} + +void gpio_init(gpio_t *obj, PinName pin) +{ + MBED_ASSERT(pin != NC); + + CMU_ClockEnable(cmuClock_HFPER, true); + CMU_ClockEnable(cmuClock_GPIO, true); + obj->pin = pin; +} + +void gpio_mode(gpio_t *obj, PinMode mode) +{ + uint32_t pin = 1 << (obj->pin & 0xF); + uint32_t port = (obj->pin >> 4) & 0xF; + + if(obj->dir == PIN_INPUT) { + switch(mode) { + case PullDefault: + mode = Input; + break; + case PullUp: + mode = InputPullUp; + break; + case PullDown: + mode = InputPullDown; + break; + default: + break; + } + + //Handle DOUT setting + if((mode & 0x10) != 0) { + //Set DOUT +#ifdef _GPIO_P_DOUTSET_MASK + GPIO->P[port].DOUTSET = pin; +#else + GPIO->P[port].DOUT |= pin; +#endif + } else { + //Clear DOUT +#ifdef _GPIO_P_DOUTCLR_MASK + GPIO->P[port].DOUTCLR = pin; +#else + GPIO->P[port].DOUT &= ~pin; +#endif + } + } else { + switch(mode) { + case PullDefault: + mode = PushPull; + break; + case PullUp: + mode = WiredAndPullUp; + break; + case PullDown: + mode = WiredOrPullDown; + break; + default: + break; + } + } + + obj->mode = mode; // Update object + pin_mode(obj->pin, mode); // Update register +} + +// Used by DigitalInOut to set correct mode when direction is set +void gpio_dir(gpio_t *obj, PinDirection direction) +{ + obj->dir = direction; + switch (direction) { + case PIN_INPUT: + gpio_mode(obj, PullDefault); + break; + case PIN_OUTPUT: + gpio_mode(obj, PullNone); + break; + } +}