Diff: targets/hal/TARGET_Freescale/TARGET_KSDK2_MCUS/TARGET_K66F/drivers/fsl_lpuart_edma.c

Revision:

144:ef7eb2e8f9f7

diff -r 423e1876dc07 -r ef7eb2e8f9f7 targets/hal/TARGET_Freescale/TARGET_KSDK2_MCUS/TARGET_K66F/drivers/fsl_lpuart_edma.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_Freescale/TARGET_KSDK2_MCUS/TARGET_K66F/drivers/fsl_lpuart_edma.c	Fri Sep 02 15:07:44 2016 +0100
@@ -0,0 +1,334 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "fsl_lpuart_edma.h"
+#include "fsl_dmamux.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*<! Structure definition for lpuart_edma_private_handle_t. The structure is private. */
+typedef struct _lpuart_edma_private_handle
+{
+    LPUART_Type *base;
+    lpuart_edma_handle_t *handle;
+} lpuart_edma_private_handle_t;
+
+/* LPUART EDMA transfer handle. */
+enum _lpuart_edma_tansfer_states
+{
+    kLPUART_TxIdle, /* TX idle. */
+    kLPUART_TxBusy, /* TX busy. */
+    kLPUART_RxIdle, /* RX idle. */
+    kLPUART_RxBusy  /* RX busy. */
+};
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*<! Private handle only used for internally. */
+static lpuart_edma_private_handle_t s_edmaPrivateHandle[FSL_FEATURE_SOC_LPUART_COUNT];
+
+/*******************************************************************************
+ * Prototypes
+ ******************************************************************************/
+
+/*!
+ * @brief LPUART EDMA send finished callback function.
+ *
+ * This function is called when LPUART EDMA send finished. It disables the LPUART
+ * TX EDMA request and sends @ref kStatus_LPUART_TxIdle to LPUART callback.
+ *
+ * @param handle The EDMA handle.
+ * @param param Callback function parameter.
+ */
+static void LPUART_SendEDMACallback(edma_handle_t *handle, void *param, bool transferDone, uint32_t tcds);
+
+/*!
+ * @brief LPUART EDMA receive finished callback function.
+ *
+ * This function is called when LPUART EDMA receive finished. It disables the LPUART
+ * RX EDMA request and sends @ref kStatus_LPUART_RxIdle to LPUART callback.
+ *
+ * @param handle The EDMA handle.
+ * @param param Callback function parameter.
+ */
+static void LPUART_ReceiveEDMACallback(edma_handle_t *handle, void *param, bool transferDone, uint32_t tcds);
+
+/*!
+ * @brief Get the LPUART instance from peripheral base address.
+ *
+ * @param base LPUART peripheral base address.
+ * @return LPUART instance.
+ */
+extern uint32_t LPUART_GetInstance(LPUART_Type *base);
+
+/*******************************************************************************
+ * Code
+ ******************************************************************************/
+
+static void LPUART_SendEDMACallback(edma_handle_t *handle, void *param, bool transferDone, uint32_t tcds)
+{
+    lpuart_edma_private_handle_t *lpuartPrivateHandle = (lpuart_edma_private_handle_t *)param;
+
+    /* Avoid the warning for unused variables. */
+    handle = handle;
+    tcds = tcds;
+
+    if (transferDone)
+    {
+        LPUART_TransferAbortSendEDMA(lpuartPrivateHandle->base, lpuartPrivateHandle->handle);
+
+        if (lpuartPrivateHandle->handle->callback)
+        {
+            lpuartPrivateHandle->handle->callback(lpuartPrivateHandle->base, lpuartPrivateHandle->handle,
+                                                  kStatus_LPUART_TxIdle, lpuartPrivateHandle->handle->userData);
+        }
+    }
+}
+
+static void LPUART_ReceiveEDMACallback(edma_handle_t *handle, void *param, bool transferDone, uint32_t tcds)
+{
+    lpuart_edma_private_handle_t *lpuartPrivateHandle = (lpuart_edma_private_handle_t *)param;
+
+    /* Avoid warning for unused parameters. */
+    handle = handle;
+    tcds = tcds;
+
+    if (transferDone)
+    {
+        /* Disable transfer. */
+        LPUART_TransferAbortReceiveEDMA(lpuartPrivateHandle->base, lpuartPrivateHandle->handle);
+
+        if (lpuartPrivateHandle->handle->callback)
+        {
+            lpuartPrivateHandle->handle->callback(lpuartPrivateHandle->base, lpuartPrivateHandle->handle,
+                                                  kStatus_LPUART_RxIdle, lpuartPrivateHandle->handle->userData);
+        }
+    }
+}
+
+void LPUART_TransferCreateHandleEDMA(LPUART_Type *base,
+                             lpuart_edma_handle_t *handle,
+                             lpuart_edma_transfer_callback_t callback,
+                             void *userData,
+                             edma_handle_t *txEdmaHandle,
+                             edma_handle_t *rxEdmaHandle)
+{
+    assert(handle);
+
+    uint32_t instance = LPUART_GetInstance(base);
+
+    s_edmaPrivateHandle[instance].base = base;
+    s_edmaPrivateHandle[instance].handle = handle;
+
+    memset(handle, 0, sizeof(*handle));
+
+    handle->rxState = kLPUART_RxIdle;
+    handle->txState = kLPUART_TxIdle;
+
+    handle->rxEdmaHandle = rxEdmaHandle;
+    handle->txEdmaHandle = txEdmaHandle;
+
+    handle->callback = callback;
+    handle->userData = userData;
+
+#if defined(FSL_FEATURE_LPUART_HAS_FIFO) && FSL_FEATURE_LPUART_HAS_FIFO
+    /* Note:
+       Take care of the RX FIFO, EDMA request only assert when received bytes
+       equal or more than RX water mark, there is potential issue if RX water
+       mark larger than 1.
+       For example, if RX FIFO water mark is 2, upper layer needs 5 bytes and
+       5 bytes are received. the last byte will be saved in FIFO but not trigger
+       EDMA transfer because the water mark is 2.
+     */
+    if (rxEdmaHandle)
+    {
+        base->WATER &= (~LPUART_WATER_RXWATER_MASK);
+    }
+#endif
+
+    /* Configure TX. */
+    if (txEdmaHandle)
+    {
+        EDMA_SetCallback(handle->txEdmaHandle, LPUART_SendEDMACallback, &s_edmaPrivateHandle[instance]);
+    }
+
+    /* Configure RX. */
+    if (rxEdmaHandle)
+    {
+        EDMA_SetCallback(handle->rxEdmaHandle, LPUART_ReceiveEDMACallback, &s_edmaPrivateHandle[instance]);
+    }
+}
+status_t LPUART_SendEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle, lpuart_transfer_t *xfer)
+{
+    assert(handle->txEdmaHandle);
+
+    edma_transfer_config_t xferConfig;
+    status_t status;
+
+    /* Return error if xfer invalid. */
+    if ((0U == xfer->dataSize) || (NULL == xfer->data))
+    {
+        return kStatus_InvalidArgument;
+    }
+
+    /* If previous TX not finished. */
+    if (kLPUART_TxBusy == handle->txState)
+    {
+        status = kStatus_LPUART_TxBusy;
+    }
+    else
+    {
+        handle->txState = kLPUART_TxBusy;
+        handle->txDataSizeAll = xfer->dataSize;
+
+        /* Prepare transfer. */
+        EDMA_PrepareTransfer(&xferConfig, xfer->data, sizeof(uint8_t), (void *)LPUART_GetDataRegisterAddress(base),
+                             sizeof(uint8_t), sizeof(uint8_t), xfer->dataSize, kEDMA_MemoryToPeripheral);
+
+        /* Submit transfer. */
+        EDMA_SubmitTransfer(handle->txEdmaHandle, &xferConfig);
+        EDMA_StartTransfer(handle->txEdmaHandle);
+
+        /* Enable LPUART TX EDMA. */
+        LPUART_EnableTxDMA(base, true);
+
+        status = kStatus_Success;
+    }
+
+    return status;
+}
+
+status_t LPUART_ReceiveEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle, lpuart_transfer_t *xfer)
+{
+    assert(handle->rxEdmaHandle);
+
+    edma_transfer_config_t xferConfig;
+    status_t status;
+
+    /* Return error if xfer invalid. */
+    if ((0U == xfer->dataSize) || (NULL == xfer->data))
+    {
+        return kStatus_InvalidArgument;
+    }
+
+    /* If previous RX not finished. */
+    if (kLPUART_RxBusy == handle->rxState)
+    {
+        status = kStatus_LPUART_RxBusy;
+    }
+    else
+    {
+        handle->rxState = kLPUART_RxBusy;
+        handle->rxDataSizeAll = xfer->dataSize;
+
+        /* Prepare transfer. */
+        EDMA_PrepareTransfer(&xferConfig, (void *)LPUART_GetDataRegisterAddress(base), sizeof(uint8_t), xfer->data,
+                             sizeof(uint8_t), sizeof(uint8_t), xfer->dataSize, kEDMA_PeripheralToMemory);
+
+        /* Submit transfer. */
+        EDMA_SubmitTransfer(handle->rxEdmaHandle, &xferConfig);
+        EDMA_StartTransfer(handle->rxEdmaHandle);
+
+        /* Enable LPUART RX EDMA. */
+        LPUART_EnableRxDMA(base, true);
+
+        status = kStatus_Success;
+    }
+
+    return status;
+}
+
+void LPUART_TransferAbortSendEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle)
+{
+    assert(handle->txEdmaHandle);
+
+    /* Disable LPUART TX EDMA. */
+    LPUART_EnableTxDMA(base, false);
+
+    /* Stop transfer. */
+    EDMA_AbortTransfer(handle->txEdmaHandle);
+
+    handle->txState = kLPUART_TxIdle;
+}
+
+void LPUART_TransferAbortReceiveEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle)
+{
+    assert(handle->rxEdmaHandle);
+
+    /* Disable LPUART RX EDMA. */
+    LPUART_EnableRxDMA(base, false);
+
+    /* Stop transfer. */
+    EDMA_AbortTransfer(handle->rxEdmaHandle);
+
+    handle->rxState = kLPUART_RxIdle;
+}
+
+status_t LPUART_TransferGetReceiveCountEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle, uint32_t *count)
+{
+    assert(handle->rxEdmaHandle);
+
+    if (kLPUART_RxIdle == handle->rxState)
+    {
+        return kStatus_NoTransferInProgress;
+    }
+
+    if (!count)
+    {
+        return kStatus_InvalidArgument;
+    }
+
+    *count = handle->rxDataSizeAll - EDMA_GetRemainingBytes(handle->rxEdmaHandle->base, handle->rxEdmaHandle->channel);
+
+    return kStatus_Success;
+}
+
+status_t LPUART_TransferGetSendCountEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle, uint32_t *count)
+{
+    assert(handle->txEdmaHandle);
+
+    if (kLPUART_TxIdle == handle->txState)
+    {
+        return kStatus_NoTransferInProgress;
+    }
+
+    if (!count)
+    {
+        return kStatus_InvalidArgument;
+    }
+
+    *count = handle->txDataSizeAll - EDMA_GetRemainingBytes(handle->txEdmaHandle->base, handle->txEdmaHandle->channel);
+
+    return kStatus_Success;
+}