added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
Diff: targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U24_301/startup_LPC11xx.S
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
diff -r 423e1876dc07 -r ef7eb2e8f9f7 targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U24_301/startup_LPC11xx.S --- a/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U24_301/startup_LPC11xx.S Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_IAR/TARGET_LPC11U24_301/startup_LPC11xx.S Fri Sep 02 15:07:44 2016 +0100 @@ -1,333 +1,333 @@ -/************************************************** - * - * Part one of the system initialization code, contains low-level - * initialization, plain thumb variant. - * - * Copyright 2012 IAR Systems. All rights reserved. - * - * $Revision: 28 $ - * - **************************************************/ - -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - EXTERN SystemInit - - PUBLIC __vector_table - PUBLIC __vector_table_0x1c - DATA - - -__vector_table - DCD sfe(CSTACK) ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler -__vector_table_0x1c - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD FLEX_INT0_IRQHandler ; All GPIO pin can be routed to FLEX_INTx - DCD FLEX_INT1_IRQHandler - DCD FLEX_INT2_IRQHandler - DCD FLEX_INT3_IRQHandler - DCD FLEX_INT4_IRQHandler - DCD FLEX_INT5_IRQHandler - DCD FLEX_INT6_IRQHandler - DCD FLEX_INT7_IRQHandler - DCD GINT0_IRQHandler - DCD GINT1_IRQHandler ; PIO0 (0:7) - DCD Reserved_IRQHandler ; Reserved - DCD Reserved_IRQHandler - DCD Reserved_IRQHandler - DCD Reserved_IRQHandler - DCD SSP1_IRQHandler ; SSP1 - DCD I2C_IRQHandler ; I2C - DCD TIMER16_0_IRQHandler ; 16-bit Timer0 - DCD TIMER16_1_IRQHandler ; 16-bit Timer1 - DCD TIMER32_0_IRQHandler ; 32-bit Timer0 - DCD TIMER32_1_IRQHandler ; 32-bit Timer1 - DCD SSP0_IRQHandler ; SSP0 - DCD UART_IRQHandler ; UART - DCD USB_IRQHandler ; USB IRQ - DCD USB_FIQHandler ; USB FIQ - DCD ADC_IRQHandler ; A/D Converter - DCD WDT_IRQHandler ; Watchdog timer - DCD BOD_IRQHandler ; Brown Out Detect - DCD FMC_IRQHandler ; IP2111 Flash Memory Controller - DCD Reserved_IRQHandler ; Reserved - DCD Reserved_IRQHandler ; Reserved - DCD USBWakeup_IRQHandler ; USB wake up - DCD Reserved_IRQHandler ; Reserved - - ;; 48 vector entries. We pad to 128 to fill the 0x0 - 0x1FF REMAP address space - - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill - DCD 0xFFFFFFFF ; Datafill -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - PUBWEAK Reset_Handler - SECTION .text:CODE:NOROOT:REORDER(2) -Reset_Handler - LDR R0, =SystemInit - BLX R0 - LDR R0, =__iar_program_start - BX R0 - - PUBWEAK NMI_Handler - PUBWEAK HardFault_Handler - PUBWEAK MemManage_Handler - PUBWEAK BusFault_Handler - PUBWEAK UsageFault_Handler - PUBWEAK SVC_Handler - PUBWEAK DebugMon_Handler - PUBWEAK PendSV_Handler - PUBWEAK SysTick_Handler - PUBWEAK FLEX_INT0_IRQHandler - PUBWEAK FLEX_INT1_IRQHandler - PUBWEAK FLEX_INT2_IRQHandler - PUBWEAK FLEX_INT3_IRQHandler - PUBWEAK FLEX_INT4_IRQHandler - PUBWEAK FLEX_INT5_IRQHandler - PUBWEAK FLEX_INT6_IRQHandler - PUBWEAK FLEX_INT7_IRQHandler - PUBWEAK GINT0_IRQHandler - PUBWEAK GINT1_IRQHandler - PUBWEAK SSP1_IRQHandler - PUBWEAK I2C_IRQHandler - PUBWEAK TIMER16_0_IRQHandler - PUBWEAK TIMER16_1_IRQHandler - PUBWEAK TIMER32_0_IRQHandler - PUBWEAK TIMER32_1_IRQHandler - PUBWEAK SSP0_IRQHandler - PUBWEAK UART_IRQHandler - PUBWEAK USB_IRQHandler - PUBWEAK USB_FIQHandler - PUBWEAK ADC_IRQHandler - PUBWEAK WDT_IRQHandler - PUBWEAK BOD_IRQHandler - PUBWEAK FMC_IRQHandler - PUBWEAK USBWakeup_IRQHandler - PUBWEAK Reserved_IRQHandler - - SECTION .text:CODE:REORDER:NOROOT(1) - THUMB -NMI_Handler: - B . -HardFault_Handler: - B . -MemManage_Handler: - B . -BusFault_Handler: - B . -UsageFault_Handler: - B . -SVC_Handler: - B . -DebugMon_Handler: - B . -PendSV_Handler: - B . -SysTick_Handler: - B . -FLEX_INT0_IRQHandler: - B . -FLEX_INT1_IRQHandler: - B . -FLEX_INT2_IRQHandler: - B . -FLEX_INT3_IRQHandler: - B . -FLEX_INT4_IRQHandler: - B . -FLEX_INT5_IRQHandler: - B . -FLEX_INT6_IRQHandler: - B . -FLEX_INT7_IRQHandler: - B . -GINT0_IRQHandler: - B . -GINT1_IRQHandler: - B . -SSP1_IRQHandler: - B . -I2C_IRQHandler: - B . -TIMER16_0_IRQHandler: - B . -TIMER16_1_IRQHandler: - B . -TIMER32_0_IRQHandler: - B . -TIMER32_1_IRQHandler: - B . -SSP0_IRQHandler: - B . -UART_IRQHandler: - B . -USB_IRQHandler: - B . -USB_FIQHandler: - B . -ADC_IRQHandler: - B . -WDT_IRQHandler: - B . -BOD_IRQHandler: - B . -FMC_IRQHandler: - B . -USBWakeup_IRQHandler: - B . -Reserved_IRQHandler: - B . -Default_Handler: - B . - - SECTION .crp:CODE:ROOT(2) - DATA -/* Code Read Protection -NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode -CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. - - Copy RAM to flash command can not write to Sector 0. - - Erase command can erase Sector 0 only when all sectors - are selected for erase. - - Compare command is disabled. - - Read Memory command is disabled. -CRP2 0x87654321 - Read Memory is disabled. - - Write to RAM is disabled. - - "Go" command is disabled. - - Copy RAM to flash is disabled. - - Compare is disabled. -CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry - by pulling PIO0_1 LOW is disabled if a valid user code is - present in flash sector 0. -Caution: If CRP3 is selected, no future factory testing can be -performed on the device. -*/ - DCD 0xFFFFFFFF - - END +/************************************************** + * + * Part one of the system initialization code, contains low-level + * initialization, plain thumb variant. + * + * Copyright 2012 IAR Systems. All rights reserved. + * + * $Revision: 28 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + DATA + + +__vector_table + DCD sfe(CSTACK) ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler +__vector_table_0x1c + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD FLEX_INT0_IRQHandler ; All GPIO pin can be routed to FLEX_INTx + DCD FLEX_INT1_IRQHandler + DCD FLEX_INT2_IRQHandler + DCD FLEX_INT3_IRQHandler + DCD FLEX_INT4_IRQHandler + DCD FLEX_INT5_IRQHandler + DCD FLEX_INT6_IRQHandler + DCD FLEX_INT7_IRQHandler + DCD GINT0_IRQHandler + DCD GINT1_IRQHandler ; PIO0 (0:7) + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler + DCD Reserved_IRQHandler + DCD Reserved_IRQHandler + DCD SSP1_IRQHandler ; SSP1 + DCD I2C_IRQHandler ; I2C + DCD TIMER16_0_IRQHandler ; 16-bit Timer0 + DCD TIMER16_1_IRQHandler ; 16-bit Timer1 + DCD TIMER32_0_IRQHandler ; 32-bit Timer0 + DCD TIMER32_1_IRQHandler ; 32-bit Timer1 + DCD SSP0_IRQHandler ; SSP0 + DCD UART_IRQHandler ; UART + DCD USB_IRQHandler ; USB IRQ + DCD USB_FIQHandler ; USB FIQ + DCD ADC_IRQHandler ; A/D Converter + DCD WDT_IRQHandler ; Watchdog timer + DCD BOD_IRQHandler ; Brown Out Detect + DCD FMC_IRQHandler ; IP2111 Flash Memory Controller + DCD Reserved_IRQHandler ; Reserved + DCD Reserved_IRQHandler ; Reserved + DCD USBWakeup_IRQHandler ; USB wake up + DCD Reserved_IRQHandler ; Reserved + + ;; 48 vector entries. We pad to 128 to fill the 0x0 - 0x1FF REMAP address space + + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill + DCD 0xFFFFFFFF ; Datafill +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK MemManage_Handler + PUBWEAK BusFault_Handler + PUBWEAK UsageFault_Handler + PUBWEAK SVC_Handler + PUBWEAK DebugMon_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK FLEX_INT0_IRQHandler + PUBWEAK FLEX_INT1_IRQHandler + PUBWEAK FLEX_INT2_IRQHandler + PUBWEAK FLEX_INT3_IRQHandler + PUBWEAK FLEX_INT4_IRQHandler + PUBWEAK FLEX_INT5_IRQHandler + PUBWEAK FLEX_INT6_IRQHandler + PUBWEAK FLEX_INT7_IRQHandler + PUBWEAK GINT0_IRQHandler + PUBWEAK GINT1_IRQHandler + PUBWEAK SSP1_IRQHandler + PUBWEAK I2C_IRQHandler + PUBWEAK TIMER16_0_IRQHandler + PUBWEAK TIMER16_1_IRQHandler + PUBWEAK TIMER32_0_IRQHandler + PUBWEAK TIMER32_1_IRQHandler + PUBWEAK SSP0_IRQHandler + PUBWEAK UART_IRQHandler + PUBWEAK USB_IRQHandler + PUBWEAK USB_FIQHandler + PUBWEAK ADC_IRQHandler + PUBWEAK WDT_IRQHandler + PUBWEAK BOD_IRQHandler + PUBWEAK FMC_IRQHandler + PUBWEAK USBWakeup_IRQHandler + PUBWEAK Reserved_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB +NMI_Handler: + B . +HardFault_Handler: + B . +MemManage_Handler: + B . +BusFault_Handler: + B . +UsageFault_Handler: + B . +SVC_Handler: + B . +DebugMon_Handler: + B . +PendSV_Handler: + B . +SysTick_Handler: + B . +FLEX_INT0_IRQHandler: + B . +FLEX_INT1_IRQHandler: + B . +FLEX_INT2_IRQHandler: + B . +FLEX_INT3_IRQHandler: + B . +FLEX_INT4_IRQHandler: + B . +FLEX_INT5_IRQHandler: + B . +FLEX_INT6_IRQHandler: + B . +FLEX_INT7_IRQHandler: + B . +GINT0_IRQHandler: + B . +GINT1_IRQHandler: + B . +SSP1_IRQHandler: + B . +I2C_IRQHandler: + B . +TIMER16_0_IRQHandler: + B . +TIMER16_1_IRQHandler: + B . +TIMER32_0_IRQHandler: + B . +TIMER32_1_IRQHandler: + B . +SSP0_IRQHandler: + B . +UART_IRQHandler: + B . +USB_IRQHandler: + B . +USB_FIQHandler: + B . +ADC_IRQHandler: + B . +WDT_IRQHandler: + B . +BOD_IRQHandler: + B . +FMC_IRQHandler: + B . +USBWakeup_IRQHandler: + B . +Reserved_IRQHandler: + B . +Default_Handler: + B . + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode +CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. + - Copy RAM to flash command can not write to Sector 0. + - Erase command can erase Sector 0 only when all sectors + are selected for erase. + - Compare command is disabled. + - Read Memory command is disabled. +CRP2 0x87654321 - Read Memory is disabled. + - Write to RAM is disabled. + - "Go" command is disabled. + - Copy RAM to flash is disabled. + - Compare is disabled. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + END