added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
Diff: targets/cmsis/TARGET_Freescale/TARGET_KLXX/TARGET_KL46Z/TOOLCHAIN_IAR/startup_MKL46Z4.S
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
diff -r 423e1876dc07 -r ef7eb2e8f9f7 targets/cmsis/TARGET_Freescale/TARGET_KLXX/TARGET_KL46Z/TOOLCHAIN_IAR/startup_MKL46Z4.S --- a/targets/cmsis/TARGET_Freescale/TARGET_KLXX/TARGET_KL46Z/TOOLCHAIN_IAR/startup_MKL46Z4.S Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/cmsis/TARGET_Freescale/TARGET_KLXX/TARGET_KL46Z/TOOLCHAIN_IAR/startup_MKL46Z4.S Fri Sep 02 15:07:44 2016 +0100 @@ -1,217 +1,217 @@ -/************************************************** - * - * Copyright 2010 IAR Systems. All rights reserved. - * - * $Revision: 16 $ - * - **************************************************/ - -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:ROOT(2) - - EXTERN __iar_program_start - EXTERN SystemInit - PUBLIC __vector_table - - DATA -__vector_table - DCD sfe(CSTACK) ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - ; External Interrupts - DCD DMA0_IRQHandler ; DMA channel 0 transfer complete/error interrupt - DCD DMA1_IRQHandler ; DMA channel 1 transfer complete/error interrupt - DCD DMA2_IRQHandler ; DMA channel 2 transfer complete/error interrupt - DCD DMA3_IRQHandler ; DMA channel 3 transfer complete/error interrupt - DCD 0 ; Reserved - DCD FTFA_IRQHandler ; FTFA command complete/read collision interrupt - DCD LVD_LVW_IRQHandler ; Low Voltage Detect, Low Voltage Warning - DCD LLW_IRQHandler ; Low Leakage Wakeup - DCD I2C0_IRQHandler ; I2C0 interrupt - DCD I2C1_IRQHandler ; I2C0 interrupt 25 - DCD SPI0_IRQHandler ; SPI0 interrupt - DCD SPI1_IRQHandler ; SPI1 interrupt - DCD UART0_IRQHandler ; UART0 status/error interrupt - DCD UART1_IRQHandler ; UART1 status/error interrupt - DCD UART2_IRQHandler ; UART2 status/error interrupt - DCD ADC0_IRQHandler ; ADC0 interrupt - DCD CMP0_IRQHandler ; CMP0 interrupt - DCD TPM0_IRQHandler ; TPM0 fault, overflow and channels interrupt - DCD TPM1_IRQHandler ; TPM1 fault, overflow and channels interrupt - DCD TPM2_IRQHandler ; TPM2 fault, overflow and channels interrupt - DCD RTC_IRQHandler ; RTC interrupt - DCD RTC_Seconds_IRQHandler ; RTC seconds interrupt - DCD PIT_IRQHandler ; PIT timer interrupt - DCD I2S0_IRQHandler ; I2S0 transmit interrupt - DCD USB0_IRQHandler ; USB0 interrupt - DCD DAC0_IRQHandler ; DAC0 interrupt - DCD TSI0_IRQHandler ; TSI0 interrupt - DCD MCG_IRQHandler ; MCG interrupt - DCD LPTimer_IRQHandler ; LPTimer interrupt - DCD LCD_IRQHandler ; Segment LCD Interrupt - DCD PORTA_IRQHandler ; Port A interrupt - DCD PORTD_IRQHandler ; Port D interrupt -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;Flash Configuration -;;16-byte flash configuration field that stores default protection settings (loaded on reset) -;;and security information that allows the MCU to restrict acces to the FTFL module. - -BackDoorK0 EQU 0xFF -BackDoorK1 EQU 0xFF -BackDoorK2 EQU 0xFF -BackDoorK3 EQU 0xFF -BackDoorK4 EQU 0xFF -BackDoorK5 EQU 0xFF -BackDoorK6 EQU 0xFF -BackDoorK7 EQU 0xFF - -nFPROT0 EQU 0x00 -FPROT0 EQU nFPROT0^0xFF - -nFPROT1 EQU 0x00 -FPROT1 EQU nFPROT1^0xFF - -nFPROT2 EQU 0x00 -FPROT2 EQU nFPROT2^0xFF - -nFPROT3 EQU 0x00 -FPROT3 EQU nFPROT3^0xFF - -FOPT EQU 0xFF - -FSEC EQU 0xFE - SECTION FlashConfig:CONST:REORDER:ROOT(2) -Config: - DATA - DCB BackDoorK0, BackDoorK1, BackDoorK2, BackDoorK3 - DCB BackDoorK4, BackDoorK5, BackDoorK6, BackDoorK7 - DCB FPROT0, FPROT1, FPROT2, FPROT3 - DCB FSEC, FOPT, 0xFF, 0xFF -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - PUBWEAK Reset_Handler - SECTION .text:CODE:NOROOT:REORDER(2) -Reset_Handler - - LDR R0, =SystemInit - BLX R0 - LDR R0, =__iar_program_start - BX R0 - - PUBWEAK NMI_Handler - PUBWEAK HardFault_Handler - PUBWEAK SVC_Handler - PUBWEAK PendSV_Handler - PUBWEAK SysTick_Handler - PUBWEAK DMA0_IRQHandler - PUBWEAK DMA1_IRQHandler - PUBWEAK DMA2_IRQHandler - PUBWEAK DMA3_IRQHandler - PUBWEAK Reserved20_IRQHandler - PUBWEAK FTFA_IRQHandler - PUBWEAK LVD_LVW_IRQHandler - PUBWEAK LLW_IRQHandler - PUBWEAK I2C0_IRQHandler - PUBWEAK I2C1_IRQHandler - PUBWEAK SPI0_IRQHandler - PUBWEAK SPI1_IRQHandler - PUBWEAK UART0_IRQHandler - PUBWEAK UART1_IRQHandler - PUBWEAK UART2_IRQHandler - PUBWEAK ADC0_IRQHandler - PUBWEAK CMP0_IRQHandler - PUBWEAK TPM0_IRQHandler - PUBWEAK TPM1_IRQHandler - PUBWEAK TPM2_IRQHandler - PUBWEAK RTC_IRQHandler - PUBWEAK RTC_Seconds_IRQHandler - PUBWEAK PIT_IRQHandler - PUBWEAK I2S0_IRQHandler - PUBWEAK USB0_IRQHandler - PUBWEAK DAC0_IRQHandler - PUBWEAK TSI0_IRQHandler - PUBWEAK MCG_IRQHandler - PUBWEAK LPTimer_IRQHandler - PUBWEAK LCD_IRQHandler - PUBWEAK PORTA_IRQHandler - PUBWEAK PORTD_IRQHandler - - SECTION .text:CODE:REORDER:NOROOT(1) - THUMB -NMI_Handler -HardFault_Handler -SVC_Handler -PendSV_Handler -SysTick_Handler -DMA0_IRQHandler -DMA1_IRQHandler -DMA2_IRQHandler -DMA3_IRQHandler -Reserved20_IRQHandler -FTFA_IRQHandler -LVD_LVW_IRQHandler -LLW_IRQHandler -I2C0_IRQHandler -I2C1_IRQHandler -SPI0_IRQHandler -SPI1_IRQHandler -UART0_IRQHandler -UART1_IRQHandler -UART2_IRQHandler -ADC0_IRQHandler -CMP0_IRQHandler -TPM0_IRQHandler -TPM1_IRQHandler -TPM2_IRQHandler -RTC_IRQHandler -RTC_Seconds_IRQHandler -PIT_IRQHandler -I2S0_IRQHandler -USB0_IRQHandler -DAC0_IRQHandler -TSI0_IRQHandler -MCG_IRQHandler -LPTimer_IRQHandler -LCD_IRQHandler -PORTA_IRQHandler -PORTD_IRQHandler -Default_Handler - - B Default_Handler - END +/************************************************** + * + * Copyright 2010 IAR Systems. All rights reserved. + * + * $Revision: 16 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:ROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + ; External Interrupts + DCD DMA0_IRQHandler ; DMA channel 0 transfer complete/error interrupt + DCD DMA1_IRQHandler ; DMA channel 1 transfer complete/error interrupt + DCD DMA2_IRQHandler ; DMA channel 2 transfer complete/error interrupt + DCD DMA3_IRQHandler ; DMA channel 3 transfer complete/error interrupt + DCD 0 ; Reserved + DCD FTFA_IRQHandler ; FTFA command complete/read collision interrupt + DCD LVD_LVW_IRQHandler ; Low Voltage Detect, Low Voltage Warning + DCD LLW_IRQHandler ; Low Leakage Wakeup + DCD I2C0_IRQHandler ; I2C0 interrupt + DCD I2C1_IRQHandler ; I2C0 interrupt 25 + DCD SPI0_IRQHandler ; SPI0 interrupt + DCD SPI1_IRQHandler ; SPI1 interrupt + DCD UART0_IRQHandler ; UART0 status/error interrupt + DCD UART1_IRQHandler ; UART1 status/error interrupt + DCD UART2_IRQHandler ; UART2 status/error interrupt + DCD ADC0_IRQHandler ; ADC0 interrupt + DCD CMP0_IRQHandler ; CMP0 interrupt + DCD TPM0_IRQHandler ; TPM0 fault, overflow and channels interrupt + DCD TPM1_IRQHandler ; TPM1 fault, overflow and channels interrupt + DCD TPM2_IRQHandler ; TPM2 fault, overflow and channels interrupt + DCD RTC_IRQHandler ; RTC interrupt + DCD RTC_Seconds_IRQHandler ; RTC seconds interrupt + DCD PIT_IRQHandler ; PIT timer interrupt + DCD I2S0_IRQHandler ; I2S0 transmit interrupt + DCD USB0_IRQHandler ; USB0 interrupt + DCD DAC0_IRQHandler ; DAC0 interrupt + DCD TSI0_IRQHandler ; TSI0 interrupt + DCD MCG_IRQHandler ; MCG interrupt + DCD LPTimer_IRQHandler ; LPTimer interrupt + DCD LCD_IRQHandler ; Segment LCD Interrupt + DCD PORTA_IRQHandler ; Port A interrupt + DCD PORTD_IRQHandler ; Port D interrupt +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;;Flash Configuration +;;16-byte flash configuration field that stores default protection settings (loaded on reset) +;;and security information that allows the MCU to restrict acces to the FTFL module. + +BackDoorK0 EQU 0xFF +BackDoorK1 EQU 0xFF +BackDoorK2 EQU 0xFF +BackDoorK3 EQU 0xFF +BackDoorK4 EQU 0xFF +BackDoorK5 EQU 0xFF +BackDoorK6 EQU 0xFF +BackDoorK7 EQU 0xFF + +nFPROT0 EQU 0x00 +FPROT0 EQU nFPROT0^0xFF + +nFPROT1 EQU 0x00 +FPROT1 EQU nFPROT1^0xFF + +nFPROT2 EQU 0x00 +FPROT2 EQU nFPROT2^0xFF + +nFPROT3 EQU 0x00 +FPROT3 EQU nFPROT3^0xFF + +FOPT EQU 0xFF + +FSEC EQU 0xFE + SECTION FlashConfig:CONST:REORDER:ROOT(2) +Config: + DATA + DCB BackDoorK0, BackDoorK1, BackDoorK2, BackDoorK3 + DCB BackDoorK4, BackDoorK5, BackDoorK6, BackDoorK7 + DCB FPROT0, FPROT1, FPROT2, FPROT3 + DCB FSEC, FOPT, 0xFF, 0xFF +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK SVC_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK DMA0_IRQHandler + PUBWEAK DMA1_IRQHandler + PUBWEAK DMA2_IRQHandler + PUBWEAK DMA3_IRQHandler + PUBWEAK Reserved20_IRQHandler + PUBWEAK FTFA_IRQHandler + PUBWEAK LVD_LVW_IRQHandler + PUBWEAK LLW_IRQHandler + PUBWEAK I2C0_IRQHandler + PUBWEAK I2C1_IRQHandler + PUBWEAK SPI0_IRQHandler + PUBWEAK SPI1_IRQHandler + PUBWEAK UART0_IRQHandler + PUBWEAK UART1_IRQHandler + PUBWEAK UART2_IRQHandler + PUBWEAK ADC0_IRQHandler + PUBWEAK CMP0_IRQHandler + PUBWEAK TPM0_IRQHandler + PUBWEAK TPM1_IRQHandler + PUBWEAK TPM2_IRQHandler + PUBWEAK RTC_IRQHandler + PUBWEAK RTC_Seconds_IRQHandler + PUBWEAK PIT_IRQHandler + PUBWEAK I2S0_IRQHandler + PUBWEAK USB0_IRQHandler + PUBWEAK DAC0_IRQHandler + PUBWEAK TSI0_IRQHandler + PUBWEAK MCG_IRQHandler + PUBWEAK LPTimer_IRQHandler + PUBWEAK LCD_IRQHandler + PUBWEAK PORTA_IRQHandler + PUBWEAK PORTD_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB +NMI_Handler +HardFault_Handler +SVC_Handler +PendSV_Handler +SysTick_Handler +DMA0_IRQHandler +DMA1_IRQHandler +DMA2_IRQHandler +DMA3_IRQHandler +Reserved20_IRQHandler +FTFA_IRQHandler +LVD_LVW_IRQHandler +LLW_IRQHandler +I2C0_IRQHandler +I2C1_IRQHandler +SPI0_IRQHandler +SPI1_IRQHandler +UART0_IRQHandler +UART1_IRQHandler +UART2_IRQHandler +ADC0_IRQHandler +CMP0_IRQHandler +TPM0_IRQHandler +TPM1_IRQHandler +TPM2_IRQHandler +RTC_IRQHandler +RTC_Seconds_IRQHandler +PIT_IRQHandler +I2S0_IRQHandler +USB0_IRQHandler +DAC0_IRQHandler +TSI0_IRQHandler +MCG_IRQHandler +LPTimer_IRQHandler +LCD_IRQHandler +PORTA_IRQHandler +PORTD_IRQHandler +Default_Handler + + B Default_Handler + END