added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
Diff: targets/cmsis/TARGET_ARM_SSG/TARGET_MPS2_M7/SMM_MPS2.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 80:bdf1132a57cf
diff -r 423e1876dc07 -r ef7eb2e8f9f7 targets/cmsis/TARGET_ARM_SSG/TARGET_MPS2_M7/SMM_MPS2.h --- a/targets/cmsis/TARGET_ARM_SSG/TARGET_MPS2_M7/SMM_MPS2.h Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/cmsis/TARGET_ARM_SSG/TARGET_MPS2_M7/SMM_MPS2.h Fri Sep 02 15:07:44 2016 +0100 @@ -1,610 +1,610 @@ -/* MPS2 CMSIS Library -* -* Copyright (c) 2006-2016 ARM Limited -* All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are met: -* -* 1. Redistributions of source code must retain the above copyright notice, -* this list of conditions and the following disclaimer. -* -* 2. Redistributions in binary form must reproduce the above copyright notice, -* this list of conditions and the following disclaimer in the documentation -* and/or other materials provided with the distribution. -* -* 3. Neither the name of the copyright holder nor the names of its contributors -* may be used to endorse or promote products derived from this software without -* specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE -* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -* POSSIBILITY OF SUCH DAMAGE. -******************************************************************************* -* File: smm_mps2.h -* Release: Version 1.1 -*******************************************************************************/ - -#ifndef __SMM_MPS2_H -#define __SMM_MPS2_H - -#include "peripherallink.h" /* device specific header file */ - -#if defined ( __CC_ARM ) -#pragma anon_unions -#endif - -/******************************************************************************/ -/* FPGA System Register declaration */ -/******************************************************************************/ - -typedef struct -{ - __IO uint32_t LED; // Offset: 0x000 (R/W) LED connections - // [31:2] : Reserved - // [1:0] : LEDs - uint32_t RESERVED1[1]; - __IO uint32_t BUTTON; // Offset: 0x008 (R/W) Buttons - // [31:2] : Reserved - // [1:0] : Buttons - uint32_t RESERVED2[1]; - __IO uint32_t CLK1HZ; // Offset: 0x010 (R/W) 1Hz up counter - __IO uint32_t CLK100HZ; // Offset: 0x014 (R/W) 100Hz up counter - __IO uint32_t COUNTER; // Offset: 0x018 (R/W) Cycle Up Counter - // Increments when 32-bit prescale counter reach zero - uint32_t RESERVED3[1]; - __IO uint32_t PRESCALE; // Offset: 0x020 (R/W) Prescaler - // Bit[31:0] : reload value for prescale counter - __IO uint32_t PSCNTR; // Offset: 0x024 (R/W) 32-bit Prescale counter - // current value of the pre-scaler counter - // The Cycle Up Counter increment when the prescale down counter reach 0 - // The pre-scaler counter is reloaded with PRESCALE after reaching 0. - uint32_t RESERVED4[9]; - __IO uint32_t MISC; // Offset: 0x04C (R/W) Misc control */ - // [31:10] : Reserved - // [9] : SHIELD_1_SPI_nCS - // [8] : SHIELD_0_SPI_nCS - // [7] : ADC_SPI_nCS - // [6] : CLCD_BL_CTRL - // [5] : CLCD_RD - // [4] : CLCD_RS - // [3] : CLCD_RESET - // [2] : RESERVED - // [1] : SPI_nSS - // [0] : CLCD_CS -} MPS2_FPGAIO_TypeDef; - -// MISC register bit definitions - -#define CLCD_CS_Pos 0 -#define CLCD_CS_Msk (1UL<<CLCD_CS_Pos) -#define SPI_nSS_Pos 1 -#define SPI_nSS_Msk (1UL<<SPI_nSS_Pos) -#define CLCD_RESET_Pos 3 -#define CLCD_RESET_Msk (1UL<<CLCD_RESET_Pos) -#define CLCD_RS_Pos 4 -#define CLCD_RS_Msk (1UL<<CLCD_RS_Pos) -#define CLCD_RD_Pos 5 -#define CLCD_RD_Msk (1UL<<CLCD_RD_Pos) -#define CLCD_BL_Pos 6 -#define CLCD_BL_Msk (1UL<<CLCD_BL_Pos) -#define ADC_nCS_Pos 7 -#define ADC_nCS_Msk (1UL<<ADC_nCS_Pos) -#define SHIELD_0_nCS_Pos 8 -#define SHIELD_0_nCS_Msk (1UL<<SHIELD_0_nCS_Pos) -#define SHIELD_1_nCS_Pos 9 -#define SHIELD_1_nCS_Msk (1UL<<SHIELD_1_nCS_Pos) - -/******************************************************************************/ -/* SCC Register declaration */ -/******************************************************************************/ - -typedef struct // -{ - __IO uint32_t CFG_REG0; // Offset: 0x000 (R/W) Remaps block RAM to ZBT - // [31:1] : Reserved - // [0] 1 : REMAP BlockRam to ZBT - __IO uint32_t LEDS; // Offset: 0x004 (R/W) Controls the MCC user LEDs - // [31:8] : Reserved - // [7:0] : MCC LEDs - uint32_t RESERVED0[1]; - __I uint32_t SWITCHES; // Offset: 0x00C (R/ ) Denotes the state of the MCC user switches - // [31:8] : Reserved - // [7:0] : These bits indicate state of the MCC switches - __I uint32_t CFG_REG4; // Offset: 0x010 (R/ ) Denotes the board revision - // [31:4] : Reserved - // [3:0] : Used by the MCC to pass PCB revision. 0 = A 1 = B - uint32_t RESERVED1[35]; - __IO uint32_t SYS_CFGDATA_RTN; // Offset: 0x0A0 (R/W) User data register - // [31:0] : Data - __IO uint32_t SYS_CFGDATA_OUT; // Offset: 0x0A4 (R/W) User data register - // [31:0] : Data - __IO uint32_t SYS_CFGCTRL; // Offset: 0x0A8 (R/W) Control register - // [31] : Start (generates interrupt on write to this bit) - // [30] : R/W access - // [29:26] : Reserved - // [25:20] : Function value - // [19:12] : Reserved - // [11:0] : Device (value of 0/1/2 for supported clocks) - __IO uint32_t SYS_CFGSTAT; // Offset: 0x0AC (R/W) Contains status information - // [31:2] : Reserved - // [1] : Error - // [0] : Complete - __IO uint32_t RESERVED2[20]; - __IO uint32_t SCC_DLL; // Offset: 0x100 (R/W) DLL Lock Register - // [31:24] : DLL LOCK MASK[7:0] - Indicate if the DLL locked is masked - // [23:16] : DLL LOCK MASK[7:0] - Indicate if the DLLs are locked or unlocked - // [15:1] : Reserved - // [0] : This bit indicates if all enabled DLLs are locked - uint32_t RESERVED3[957]; - __I uint32_t SCC_AID; // Offset: 0xFF8 (R/ ) SCC AID Register - // [31:24] : FPGA build number - // [23:20] : V2M-MPS2 target board revision (A = 0, B = 1) - // [19:11] : Reserved - // [10] : if “1” SCC_SW register has been implemented - // [9] : if “1” SCC_LED register has been implemented - // [8] : if “1” DLL lock register has been implemented - // [7:0] : number of SCC configuration register - __I uint32_t SCC_ID; // Offset: 0xFFC (R/ ) Contains information about the FPGA image - // [31:24] : Implementer ID: 0x41 = ARM - // [23:20] : Application note IP variant number - // [19:16] : IP Architecture: 0x4 =AHB - // [15:4] : Primary part number: 386 = AN386 - // [3:0] : Application note IP revision number -} MPS2_SCC_TypeDef; - - -/******************************************************************************/ -/* SSP Peripheral declaration */ -/******************************************************************************/ - -typedef struct // Document DDI0194G_ssp_pl022_r1p3_trm.pdf -{ - __IO uint32_t CR0; // Offset: 0x000 (R/W) Control register 0 - // [31:16] : Reserved - // [15:8] : Serial clock rate - // [7] : SSPCLKOUT phase, applicable to Motorola SPI frame format only - // [6] : SSPCLKOUT polarity, applicable to Motorola SPI frame format only - // [5:4] : Frame format - // [3:0] : Data Size Select - __IO uint32_t CR1; // Offset: 0x004 (R/W) Control register 1 - // [31:4] : Reserved - // [3] : Slave-mode output disable - // [2] : Master or slave mode select - // [1] : Synchronous serial port enable - // [0] : Loop back mode - __IO uint32_t DR; // Offset: 0x008 (R/W) Data register - // [31:16] : Reserved - // [15:0] : Transmit/Receive FIFO - __I uint32_t SR; // Offset: 0x00C (R/ ) Status register - // [31:5] : Reserved - // [4] : PrimeCell SSP busy flag - // [3] : Receive FIFO full - // [2] : Receive FIFO not empty - // [1] : Transmit FIFO not full - // [0] : Transmit FIFO empty - __IO uint32_t CPSR; // Offset: 0x010 (R/W) Clock prescale register - // [31:8] : Reserved - // [8:0] : Clock prescale divisor - __IO uint32_t IMSC; // Offset: 0x014 (R/W) Interrupt mask set or clear register - // [31:4] : Reserved - // [3] : Transmit FIFO interrupt mask - // [2] : Receive FIFO interrupt mask - // [1] : Receive timeout interrupt mask - // [0] : Receive overrun interrupt mask - __I uint32_t RIS; // Offset: 0x018 (R/ ) Raw interrupt status register - // [31:4] : Reserved - // [3] : raw interrupt state, prior to masking, of the SSPTXINTR interrupt - // [2] : raw interrupt state, prior to masking, of the SSPRXINTR interrupt - // [1] : raw interrupt state, prior to masking, of the SSPRTINTR interrupt - // [0] : raw interrupt state, prior to masking, of the SSPRORINTR interrupt - __I uint32_t MIS; // Offset: 0x01C (R/ ) Masked interrupt status register - // [31:4] : Reserved - // [3] : transmit FIFO masked interrupt state, after masking, of the SSPTXINTR interrupt - // [2] : receive FIFO masked interrupt state, after masking, of the SSPRXINTR interrupt - // [1] : receive timeout masked interrupt state, after masking, of the SSPRTINTR interrupt - // [0] : receive over run masked interrupt status, after masking, of the SSPRORINTR interrupt - __O uint32_t ICR; // Offset: 0x020 ( /W) Interrupt clear register - // [31:2] : Reserved - // [1] : Clears the SSPRTINTR interrupt - // [0] : Clears the SSPRORINTR interrupt - __IO uint32_t DMACR; // Offset: 0x024 (R/W) DMA control register - // [31:2] : Reserved - // [1] : Transmit DMA Enable - // [0] : Receive DMA Enable -} MPS2_SSP_TypeDef; - - -// SSP_CR0 Control register 0 -#define SSP_CR0_DSS_Pos 0 // Data Size Select -#define SSP_CR0_DSS_Msk (0xF<<SSP_CR0_DSS_Pos) -#define SSP_CR0_FRF_Pos 4 // Frame Format Select -#define SSP_CR0_FRF_Msk (3UL<<SSP_CR0_FRM_Pos) -#define SSP_CR0_SPO_Pos 6 // SSPCLKOUT polarity -#define SSP_CR0_SPO_Msk (1UL<<SSP_CR0_SPO_Pos) -#define SSP_CR0_SPH_Pos 7 // SSPCLKOUT phase -#define SSP_CR0_SPH_Msk (1UL<<SSP_CR0_SPH_Pos) -#define SSP_CR0_SCR_Pos 8 // Serial Clock Rate (divide) -#define SSP_CR0_SCR_Msk (0xFF<<SSP_CR0_SCR_Pos) - -#define SSP_CR0_SCR_DFLT 0x0300 // Serial Clock Rate (divide), default set at 3 -#define SSP_CR0_FRF_MOT 0x0000 // Frame format, Motorola -#define SSP_CR0_DSS_8 0x0007 // Data packet size, 8bits -#define SSP_CR0_DSS_16 0x000F // Data packet size, 16bits - -// SSP_CR1 Control register 1 -#define SSP_CR1_LBM_Pos 0 // Loop Back Mode -#define SSP_CR1_LBM_Msk (1UL<<SSP_CR1_LBM_Pos) -#define SSP_CR1_SSE_Pos 1 // Serial port enable -#define SSP_CR1_SSE_Msk (1UL<<SSP_CR1_SSE_Pos) -#define SSP_CR1_MS_Pos 2 // Master or Slave mode -#define SSP_CR1_MS_Msk (1UL<<SSP_CR1_MS_Pos) -#define SSP_CR1_SOD_Pos 3 // Slave Output mode Disable -#define SSP_CR1_SOD_Msk (1UL<<SSP_CR1_SOD_Pos) - -// SSP_SR Status register -#define SSP_SR_TFE_Pos 0 // Transmit FIFO empty -#define SSP_SR_TFE_Msk (1UL<<SSP_SR_TFE_Pos) -#define SSP_SR_TNF_Pos 1 // Transmit FIFO not full -#define SSP_SR_TNF_Msk (1UL<<SSP_SR_TNF_Pos) -#define SSP_SR_RNE_Pos 2 // Receive FIFO not empty -#define SSP_SR_RNE_Msk (1UL<<SSP_SR_RNE_Pos) -#define SSP_SR_RFF_Pos 3 // Receive FIFO full -#define SSP_SR_RFF_Msk (1UL<<SSP_SR_RFF_Pos) -#define SSP_SR_BSY_Pos 4 // Busy -#define SSP_SR_BSY_Msk (1UL<<SSP_SR_BSY_Pos) - -// SSP_CPSR Clock prescale register -#define SSP_CPSR_CPD_Pos 0 // Clock prescale divisor -#define SSP_CPSR_CPD_Msk (0xFF<<SSP_CPSR_CDP_Pos) - -#define SSP_CPSR_DFLT 0x0008 // Clock prescale (use with SCR), default set at 8 - -// SSPIMSC Interrupt mask set and clear register -#define SSP_IMSC_RORIM_Pos 0 // Receive overrun not Masked -#define SSP_IMSC_RORIM_Msk (1UL<<SSP_IMSC_RORIM_Pos) -#define SSP_IMSC_RTIM_Pos 1 // Receive timeout not Masked -#define SSP_IMSC_RTIM_Msk (1UL<<SSP_IMSC_RTIM_Pos) -#define SSP_IMSC_RXIM_Pos 2 // Receive FIFO not Masked -#define SSP_IMSC_RXIM_Msk (1UL<<SSP_IMSC_RXIM_Pos) -#define SSP_IMSC_TXIM_Pos 3 // Transmit FIFO not Masked -#define SSP_IMSC_TXIM_Msk (1UL<<SSP_IMSC_TXIM_Pos) - -// SSPRIS Raw interrupt status register -#define SSP_RIS_RORRIS_Pos 0 // Raw Overrun interrupt flag -#define SSP_RIS_RORRIS_Msk (1UL<<SSP_RIS_RORRIS_Pos) -#define SSP_RIS_RTRIS_Pos 1 // Raw Timemout interrupt flag -#define SSP_RIS_RTRIS_Msk (1UL<<SSP_RIS_RTRIS_Pos) -#define SSP_RIS_RXRIS_Pos 2 // Raw Receive interrupt flag -#define SSP_RIS_RXRIS_Msk (1UL<<SSP_RIS_RXRIS_Pos) -#define SSP_RIS_TXRIS_Pos 3 // Raw Transmit interrupt flag -#define SSP_RIS_TXRIS_Msk (1UL<<SSP_RIS_TXRIS_Pos) - -// SSPMIS Masked interrupt status register -#define SSP_MIS_RORMIS_Pos 0 // Masked Overrun interrupt flag -#define SSP_MIS_RORMIS_Msk (1UL<<SSP_MIS_RORMIS_Pos) -#define SSP_MIS_RTMIS_Pos 1 // Masked Timemout interrupt flag -#define SSP_MIS_RTMIS_Msk (1UL<<SSP_MIS_RTMIS_Pos) -#define SSP_MIS_RXMIS_Pos 2 // Masked Receive interrupt flag -#define SSP_MIS_RXMIS_Msk (1UL<<SSP_MIS_RXMIS_Pos) -#define SSP_MIS_TXMIS_Pos 3 // Masked Transmit interrupt flag -#define SSP_MIS_TXMIS_Msk (1UL<<SSP_MIS_TXMIS_Pos) - -// SSPICR Interrupt clear register -#define SSP_ICR_RORIC_Pos 0 // Clears Overrun interrupt flag -#define SSP_ICR_RORIC_Msk (1UL<<SSP_ICR_RORIC_Pos) -#define SSP_ICR_RTIC_Pos 1 // Clears Timemout interrupt flag -#define SSP_ICR_RTIC_Msk (1UL<<SSP_ICR_RTIC_Pos) - -// SSPDMACR DMA control register -#define SSP_DMACR_RXDMAE_Pos 0 // Enable Receive FIFO DMA -#define SSP_DMACR_RXDMAE_Msk (1UL<<SSP_DMACR_RXDMAE_Pos) -#define SSP_DMACR_TXDMAE_Pos 1 // Enable Transmit FIFO DMA -#define SSP_DMACR_TXDMAE_Msk (1UL<<SSP_DMACR_TXDMAE_Pos) - -/******************************************************************************/ -/* Audio and Touch Screen (I2C) Peripheral declaration */ -/******************************************************************************/ - -typedef struct -{ - union { - __O uint32_t CONTROLS; // Offset: 0x000 CONTROL Set Register ( /W) - __I uint32_t CONTROL; // Offset: 0x000 CONTROL Status Register (R/ ) - }; - __O uint32_t CONTROLC; // Offset: 0x004 CONTROL Clear Register ( /W) -} MPS2_I2C_TypeDef; - -#define SDA 1 << 1 -#define SCL 1 << 0 - - -/******************************************************************************/ -/* Audio I2S Peripheral declaration */ -/******************************************************************************/ - -typedef struct -{ - /*!< Offset: 0x000 CONTROL Register (R/W) */ - __IO uint32_t CONTROL; // <h> CONTROL </h> - // <o.0> TX Enable - // <0=> TX disabled - // <1=> TX enabled - // <o.1> TX IRQ Enable - // <0=> TX IRQ disabled - // <1=> TX IRQ enabled - // <o.2> RX Enable - // <0=> RX disabled - // <1=> RX enabled - // <o.3> RX IRQ Enable - // <0=> RX IRQ disabled - // <1=> RX IRQ enabled - // <o.10..8> TX Buffer Water Level - // <0=> / IRQ triggers when any space available - // <1=> / IRQ triggers when more than 1 space available - // <2=> / IRQ triggers when more than 2 space available - // <3=> / IRQ triggers when more than 3 space available - // <4=> Undefined! - // <5=> Undefined! - // <6=> Undefined! - // <7=> Undefined! - // <o.14..12> RX Buffer Water Level - // <0=> Undefined! - // <1=> / IRQ triggers when less than 1 space available - // <2=> / IRQ triggers when less than 2 space available - // <3=> / IRQ triggers when less than 3 space available - // <4=> / IRQ triggers when less than 4 space available - // <5=> Undefined! - // <6=> Undefined! - // <7=> Undefined! - // <o.16> FIFO reset - // <0=> Normal operation - // <1=> FIFO reset - // <o.17> Audio Codec reset - // <0=> Normal operation - // <1=> Assert audio Codec reset - /*!< Offset: 0x004 STATUS Register (R/ ) */ - __I uint32_t STATUS; // <h> STATUS </h> - // <o.0> TX Buffer alert - // <0=> TX buffer don't need service yet - // <1=> TX buffer need service - // <o.1> RX Buffer alert - // <0=> RX buffer don't need service yet - // <1=> RX buffer need service - // <o.2> TX Buffer Empty - // <0=> TX buffer have data - // <1=> TX buffer empty - // <o.3> TX Buffer Full - // <0=> TX buffer not full - // <1=> TX buffer full - // <o.4> RX Buffer Empty - // <0=> RX buffer have data - // <1=> RX buffer empty - // <o.5> RX Buffer Full - // <0=> RX buffer not full - // <1=> RX buffer full - union { - /*!< Offset: 0x008 Error Status Register (R/ ) */ - __I uint32_t ERROR; // <h> ERROR </h> - // <o.0> TX error - // <0=> Okay - // <1=> TX overrun/underrun - // <o.1> RX error - // <0=> Okay - // <1=> RX overrun/underrun - /*!< Offset: 0x008 Error Clear Register ( /W) */ - __O uint32_t ERRORCLR; // <h> ERRORCLR </h> - // <o.0> TX error - // <0=> Okay - // <1=> Clear TX error - // <o.1> RX error - // <0=> Okay - // <1=> Clear RX error - }; - /*!< Offset: 0x00C Divide ratio Register (R/W) */ - __IO uint32_t DIVIDE; // <h> Divide ratio for Left/Right clock </h> - // <o.9..0> TX error (default 0x80) - /*!< Offset: 0x010 Transmit Buffer ( /W) */ - __O uint32_t TXBUF; // <h> Transmit buffer </h> - // <o.15..0> Right channel - // <o.31..16> Left channel - /*!< Offset: 0x014 Receive Buffer (R/ ) */ - __I uint32_t RXBUF; // <h> Receive buffer </h> - // <o.15..0> Right channel - // <o.31..16> Left channel - uint32_t RESERVED1[186]; - __IO uint32_t ITCR; // <h> Integration Test Control Register </h> - // <o.0> ITEN - // <0=> Normal operation - // <1=> Integration Test mode enable - __O uint32_t ITIP1; // <h> Integration Test Input Register 1</h> - // <o.0> SDIN - __O uint32_t ITOP1; // <h> Integration Test Output Register 1</h> - // <o.0> SDOUT - // <o.1> SCLK - // <o.2> LRCK - // <o.3> IRQOUT -} MPS2_I2S_TypeDef; - -#define I2S_CONTROL_TXEN_Pos 0 -#define I2S_CONTROL_TXEN_Msk (1UL<<I2S_CONTROL_TXEN_Pos) - -#define I2S_CONTROL_TXIRQEN_Pos 1 -#define I2S_CONTROL_TXIRQEN_Msk (1UL<<I2S_CONTROL_TXIRQEN_Pos) - -#define I2S_CONTROL_RXEN_Pos 2 -#define I2S_CONTROL_RXEN_Msk (1UL<<I2S_CONTROL_RXEN_Pos) - -#define I2S_CONTROL_RXIRQEN_Pos 3 -#define I2S_CONTROL_RXIRQEN_Msk (1UL<<I2S_CONTROL_RXIRQEN_Pos) - -#define I2S_CONTROL_TXWLVL_Pos 8 -#define I2S_CONTROL_TXWLVL_Msk (7UL<<I2S_CONTROL_TXWLVL_Pos) - -#define I2S_CONTROL_RXWLVL_Pos 12 -#define I2S_CONTROL_RXWLVL_Msk (7UL<<I2S_CONTROL_RXWLVL_Pos) -/* FIFO reset*/ -#define I2S_CONTROL_FIFORST_Pos 16 -#define I2S_CONTROL_FIFORST_Msk (1UL<<I2S_CONTROL_FIFORST_Pos) -/* Codec reset*/ -#define I2S_CONTROL_CODECRST_Pos 17 -#define I2S_CONTROL_CODECRST_Msk (1UL<<I2S_CONTROL_CODECRST_Pos) - -#define I2S_STATUS_TXIRQ_Pos 0 -#define I2S_STATUS_TXIRQ_Msk (1UL<<I2S_STATUS_TXIRQ_Pos) - -#define I2S_STATUS_RXIRQ_Pos 1 -#define I2S_STATUS_RXIRQ_Msk (1UL<<I2S_STATUS_RXIRQ_Pos) - -#define I2S_STATUS_TXEmpty_Pos 2 -#define I2S_STATUS_TXEmpty_Msk (1UL<<I2S_STATUS_TXEmpty_Pos) - -#define I2S_STATUS_TXFull_Pos 3 -#define I2S_STATUS_TXFull_Msk (1UL<<I2S_STATUS_TXFull_Pos) - -#define I2S_STATUS_RXEmpty_Pos 4 -#define I2S_STATUS_RXEmpty_Msk (1UL<<I2S_STATUS_RXEmpty_Pos) - -#define I2S_STATUS_RXFull_Pos 5 -#define I2S_STATUS_RXFull_Msk (1UL<<I2S_STATUS_RXFull_Pos) - -#define I2S_ERROR_TXERR_Pos 0 -#define I2S_ERROR_TXERR_Msk (1UL<<I2S_ERROR_TXERR_Pos) - -#define I2S_ERROR_RXERR_Pos 1 -#define I2S_ERROR_RXERR_Msk (1UL<<I2S_ERROR_RXERR_Pos) - -/******************************************************************************/ -/* SMSC9220 Register Definitions */ -/******************************************************************************/ - -typedef struct // SMSC LAN9220 -{ -__I uint32_t RX_DATA_PORT; // Receive FIFO Ports (offset 0x0) - uint32_t RESERVED1[0x7]; -__O uint32_t TX_DATA_PORT; // Transmit FIFO Ports (offset 0x20) - uint32_t RESERVED2[0x7]; - -__I uint32_t RX_STAT_PORT; // Receive FIFO status port (offset 0x40) -__I uint32_t RX_STAT_PEEK; // Receive FIFO status peek (offset 0x44) -__I uint32_t TX_STAT_PORT; // Transmit FIFO status port (offset 0x48) -__I uint32_t TX_STAT_PEEK; // Transmit FIFO status peek (offset 0x4C) - -__I uint32_t ID_REV; // Chip ID and Revision (offset 0x50) -__IO uint32_t IRQ_CFG; // Main Interrupt Configuration (offset 0x54) -__IO uint32_t INT_STS; // Interrupt Status (offset 0x58) -__IO uint32_t INT_EN; // Interrupt Enable Register (offset 0x5C) - uint32_t RESERVED3; // Reserved for future use (offset 0x60) -__I uint32_t BYTE_TEST; // Read-only byte order testing register 87654321h (offset 0x64) -__IO uint32_t FIFO_INT; // FIFO Level Interrupts (offset 0x68) -__IO uint32_t RX_CFG; // Receive Configuration (offset 0x6C) -__IO uint32_t TX_CFG; // Transmit Configuration (offset 0x70) -__IO uint32_t HW_CFG; // Hardware Configuration (offset 0x74) -__IO uint32_t RX_DP_CTL; // RX Datapath Control (offset 0x78) -__I uint32_t RX_FIFO_INF; // Receive FIFO Information (offset 0x7C) -__I uint32_t TX_FIFO_INF; // Transmit FIFO Information (offset 0x80) -__IO uint32_t PMT_CTRL; // Power Management Control (offset 0x84) -__IO uint32_t GPIO_CFG; // General Purpose IO Configuration (offset 0x88) -__IO uint32_t GPT_CFG; // General Purpose Timer Configuration (offset 0x8C) -__I uint32_t GPT_CNT; // General Purpose Timer Count (offset 0x90) - uint32_t RESERVED4; // Reserved for future use (offset 0x94) -__IO uint32_t ENDIAN; // WORD SWAP Register (offset 0x98) -__I uint32_t FREE_RUN; // Free Run Counter (offset 0x9C) -__I uint32_t RX_DROP; // RX Dropped Frames Counter (offset 0xA0) -__IO uint32_t MAC_CSR_CMD; // MAC CSR Synchronizer Command (offset 0xA4) -__IO uint32_t MAC_CSR_DATA; // MAC CSR Synchronizer Data (offset 0xA8) -__IO uint32_t AFC_CFG; // Automatic Flow Control Configuration (offset 0xAC) -__IO uint32_t E2P_CMD; // EEPROM Command (offset 0xB0) -__IO uint32_t E2P_DATA; // EEPROM Data (offset 0xB4) - -} SMSC9220_TypeDef; - -// SMSC9220 MAC Registers Indices -#define SMSC9220_MAC_CR 0x1 -#define SMSC9220_MAC_ADDRH 0x2 -#define SMSC9220_MAC_ADDRL 0x3 -#define SMSC9220_MAC_HASHH 0x4 -#define SMSC9220_MAC_HASHL 0x5 -#define SMSC9220_MAC_MII_ACC 0x6 -#define SMSC9220_MAC_MII_DATA 0x7 -#define SMSC9220_MAC_FLOW 0x8 -#define SMSC9220_MAC_VLAN1 0x9 -#define SMSC9220_MAC_VLAN2 0xA -#define SMSC9220_MAC_WUFF 0xB -#define SMSC9220_MAC_WUCSR 0xC - -// SMSC9220 PHY Registers Indices -#define SMSC9220_PHY_BCONTROL 0x0 -#define SMSC9220_PHY_BSTATUS 0x1 -#define SMSC9220_PHY_ID1 0x2 -#define SMSC9220_PHY_ID2 0x3 -#define SMSC9220_PHY_ANEG_ADV 0x4 -#define SMSC9220_PHY_ANEG_LPA 0x5 -#define SMSC9220_PHY_ANEG_EXP 0x6 -#define SMSC9220_PHY_MCONTROL 0x17 -#define SMSC9220_PHY_MSTATUS 0x18 -#define SMSC9220_PHY_CSINDICATE 0x27 -#define SMSC9220_PHY_INTSRC 0x29 -#define SMSC9220_PHY_INTMASK 0x30 -#define SMSC9220_PHY_CS 0x31 - -/******************************************************************************/ -/* Peripheral memory map */ -/******************************************************************************/ - -#define MPS2_SSP1_BASE (0x40020000ul) /* User SSP Base Address */ -#define MPS2_SSP0_BASE (0x40021000ul) /* CLCD SSP Base Address */ -#define MPS2_TSC_I2C_BASE (0x40022000ul) /* Touch Screen I2C Base Address */ -#define MPS2_AAIC_I2C_BASE (0x40023000ul) /* Audio Interface I2C Base Address */ -#define MPS2_AAIC_I2S_BASE (0x40024000ul) /* Audio Interface I2S Base Address */ -#define MPS2_SSP2_BASE (0x40025000ul) /* adc SSP Base Address */ -#define MPS2_SSP3_BASE (0x40026000ul) /* Shield 0 SSP Base Address */ -#define MPS2_SSP4_BASE (0x40027000ul) /* Shield 1 SSP Base Address */ -#define MPS2_FPGAIO_BASE (0x40028000ul) /* FPGAIO Base Address */ -#define MPS2_SHIELD0_I2C_BASE (0x40029000ul) /* Shield 0 I2C Base Address */ -#define MPS2_SHIELD1_I2C_BASE (0x4002A000ul) /* Shield 1 I2C Base Address */ -#define MPS2_SCC_BASE (0x4002F000ul) /* SCC Base Address */ - -#define SMSC9220_BASE (0xA0000000ul) /* Ethernet SMSC9220 Base Address */ - -#define MPS2_VGA_TEXT_BUFFER (0x41000000ul) /* VGA Text Buffer Address */ -#define MPS2_VGA_BUFFER (0x41100000ul) /* VGA Buffer Base Address */ - -/******************************************************************************/ -/* Peripheral declaration */ -/******************************************************************************/ - -#define SMSC9220 ((SMSC9220_TypeDef *) SMSC9220_BASE ) -#define MPS2_TS_I2C ((MPS2_I2C_TypeDef *) MPS2_TSC_I2C_BASE ) -#define MPS2_AAIC_I2C ((MPS2_I2C_TypeDef *) MPS2_AAIC_I2C_BASE ) -#define MPS2_SHIELD0_I2C ((MPS2_I2C_TypeDef *) MPS2_SHIELD0_I2C_BASE ) -#define MPS2_SHIELD1_I2C ((MPS2_I2C_TypeDef *) MPS2_SHIELD1_I2C_BASE ) -#define MPS2_AAIC_I2S ((MPS2_I2S_TypeDef *) MPS2_AAIC_I2S_BASE ) -#define MPS2_FPGAIO ((MPS2_FPGAIO_TypeDef *) MPS2_FPGAIO_BASE ) -#define MPS2_SCC ((MPS2_SCC_TypeDef *) MPS2_SCC_BASE ) -#define MPS2_SSP0 ((MPS2_SSP_TypeDef *) MPS2_SSP0_BASE ) -#define MPS2_SSP1 ((MPS2_SSP_TypeDef *) MPS2_SSP1_BASE ) -#define MPS2_SSP2 ((MPS2_SSP_TypeDef *) MPS2_SSP2_BASE ) -#define MPS2_SSP3 ((MPS2_SSP_TypeDef *) MPS2_SSP3_BASE ) -#define MPS2_SSP4 ((MPS2_SSP_TypeDef *) MPS2_SSP4_BASE ) - -/******************************************************************************/ -/* General Function Definitions */ -/******************************************************************************/ - - -/******************************************************************************/ -/* General MACRO Definitions */ -/******************************************************************************/ - - - -#endif /* __SMM_MPS2_H */ +/* MPS2 CMSIS Library +* +* Copyright (c) 2006-2016 ARM Limited +* All rights reserved. +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions are met: +* +* 1. Redistributions of source code must retain the above copyright notice, +* this list of conditions and the following disclaimer. +* +* 2. Redistributions in binary form must reproduce the above copyright notice, +* this list of conditions and the following disclaimer in the documentation +* and/or other materials provided with the distribution. +* +* 3. Neither the name of the copyright holder nor the names of its contributors +* may be used to endorse or promote products derived from this software without +* specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE +* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. +******************************************************************************* +* File: smm_mps2.h +* Release: Version 1.1 +*******************************************************************************/ + +#ifndef __SMM_MPS2_H +#define __SMM_MPS2_H + +#include "peripherallink.h" /* device specific header file */ + +#if defined ( __CC_ARM ) +#pragma anon_unions +#endif + +/******************************************************************************/ +/* FPGA System Register declaration */ +/******************************************************************************/ + +typedef struct +{ + __IO uint32_t LED; // Offset: 0x000 (R/W) LED connections + // [31:2] : Reserved + // [1:0] : LEDs + uint32_t RESERVED1[1]; + __IO uint32_t BUTTON; // Offset: 0x008 (R/W) Buttons + // [31:2] : Reserved + // [1:0] : Buttons + uint32_t RESERVED2[1]; + __IO uint32_t CLK1HZ; // Offset: 0x010 (R/W) 1Hz up counter + __IO uint32_t CLK100HZ; // Offset: 0x014 (R/W) 100Hz up counter + __IO uint32_t COUNTER; // Offset: 0x018 (R/W) Cycle Up Counter + // Increments when 32-bit prescale counter reach zero + uint32_t RESERVED3[1]; + __IO uint32_t PRESCALE; // Offset: 0x020 (R/W) Prescaler + // Bit[31:0] : reload value for prescale counter + __IO uint32_t PSCNTR; // Offset: 0x024 (R/W) 32-bit Prescale counter + // current value of the pre-scaler counter + // The Cycle Up Counter increment when the prescale down counter reach 0 + // The pre-scaler counter is reloaded with PRESCALE after reaching 0. + uint32_t RESERVED4[9]; + __IO uint32_t MISC; // Offset: 0x04C (R/W) Misc control */ + // [31:10] : Reserved + // [9] : SHIELD_1_SPI_nCS + // [8] : SHIELD_0_SPI_nCS + // [7] : ADC_SPI_nCS + // [6] : CLCD_BL_CTRL + // [5] : CLCD_RD + // [4] : CLCD_RS + // [3] : CLCD_RESET + // [2] : RESERVED + // [1] : SPI_nSS + // [0] : CLCD_CS +} MPS2_FPGAIO_TypeDef; + +// MISC register bit definitions + +#define CLCD_CS_Pos 0 +#define CLCD_CS_Msk (1UL<<CLCD_CS_Pos) +#define SPI_nSS_Pos 1 +#define SPI_nSS_Msk (1UL<<SPI_nSS_Pos) +#define CLCD_RESET_Pos 3 +#define CLCD_RESET_Msk (1UL<<CLCD_RESET_Pos) +#define CLCD_RS_Pos 4 +#define CLCD_RS_Msk (1UL<<CLCD_RS_Pos) +#define CLCD_RD_Pos 5 +#define CLCD_RD_Msk (1UL<<CLCD_RD_Pos) +#define CLCD_BL_Pos 6 +#define CLCD_BL_Msk (1UL<<CLCD_BL_Pos) +#define ADC_nCS_Pos 7 +#define ADC_nCS_Msk (1UL<<ADC_nCS_Pos) +#define SHIELD_0_nCS_Pos 8 +#define SHIELD_0_nCS_Msk (1UL<<SHIELD_0_nCS_Pos) +#define SHIELD_1_nCS_Pos 9 +#define SHIELD_1_nCS_Msk (1UL<<SHIELD_1_nCS_Pos) + +/******************************************************************************/ +/* SCC Register declaration */ +/******************************************************************************/ + +typedef struct // +{ + __IO uint32_t CFG_REG0; // Offset: 0x000 (R/W) Remaps block RAM to ZBT + // [31:1] : Reserved + // [0] 1 : REMAP BlockRam to ZBT + __IO uint32_t LEDS; // Offset: 0x004 (R/W) Controls the MCC user LEDs + // [31:8] : Reserved + // [7:0] : MCC LEDs + uint32_t RESERVED0[1]; + __I uint32_t SWITCHES; // Offset: 0x00C (R/ ) Denotes the state of the MCC user switches + // [31:8] : Reserved + // [7:0] : These bits indicate state of the MCC switches + __I uint32_t CFG_REG4; // Offset: 0x010 (R/ ) Denotes the board revision + // [31:4] : Reserved + // [3:0] : Used by the MCC to pass PCB revision. 0 = A 1 = B + uint32_t RESERVED1[35]; + __IO uint32_t SYS_CFGDATA_RTN; // Offset: 0x0A0 (R/W) User data register + // [31:0] : Data + __IO uint32_t SYS_CFGDATA_OUT; // Offset: 0x0A4 (R/W) User data register + // [31:0] : Data + __IO uint32_t SYS_CFGCTRL; // Offset: 0x0A8 (R/W) Control register + // [31] : Start (generates interrupt on write to this bit) + // [30] : R/W access + // [29:26] : Reserved + // [25:20] : Function value + // [19:12] : Reserved + // [11:0] : Device (value of 0/1/2 for supported clocks) + __IO uint32_t SYS_CFGSTAT; // Offset: 0x0AC (R/W) Contains status information + // [31:2] : Reserved + // [1] : Error + // [0] : Complete + __IO uint32_t RESERVED2[20]; + __IO uint32_t SCC_DLL; // Offset: 0x100 (R/W) DLL Lock Register + // [31:24] : DLL LOCK MASK[7:0] - Indicate if the DLL locked is masked + // [23:16] : DLL LOCK MASK[7:0] - Indicate if the DLLs are locked or unlocked + // [15:1] : Reserved + // [0] : This bit indicates if all enabled DLLs are locked + uint32_t RESERVED3[957]; + __I uint32_t SCC_AID; // Offset: 0xFF8 (R/ ) SCC AID Register + // [31:24] : FPGA build number + // [23:20] : V2M-MPS2 target board revision (A = 0, B = 1) + // [19:11] : Reserved + // [10] : if “1” SCC_SW register has been implemented + // [9] : if “1” SCC_LED register has been implemented + // [8] : if “1” DLL lock register has been implemented + // [7:0] : number of SCC configuration register + __I uint32_t SCC_ID; // Offset: 0xFFC (R/ ) Contains information about the FPGA image + // [31:24] : Implementer ID: 0x41 = ARM + // [23:20] : Application note IP variant number + // [19:16] : IP Architecture: 0x4 =AHB + // [15:4] : Primary part number: 386 = AN386 + // [3:0] : Application note IP revision number +} MPS2_SCC_TypeDef; + + +/******************************************************************************/ +/* SSP Peripheral declaration */ +/******************************************************************************/ + +typedef struct // Document DDI0194G_ssp_pl022_r1p3_trm.pdf +{ + __IO uint32_t CR0; // Offset: 0x000 (R/W) Control register 0 + // [31:16] : Reserved + // [15:8] : Serial clock rate + // [7] : SSPCLKOUT phase, applicable to Motorola SPI frame format only + // [6] : SSPCLKOUT polarity, applicable to Motorola SPI frame format only + // [5:4] : Frame format + // [3:0] : Data Size Select + __IO uint32_t CR1; // Offset: 0x004 (R/W) Control register 1 + // [31:4] : Reserved + // [3] : Slave-mode output disable + // [2] : Master or slave mode select + // [1] : Synchronous serial port enable + // [0] : Loop back mode + __IO uint32_t DR; // Offset: 0x008 (R/W) Data register + // [31:16] : Reserved + // [15:0] : Transmit/Receive FIFO + __I uint32_t SR; // Offset: 0x00C (R/ ) Status register + // [31:5] : Reserved + // [4] : PrimeCell SSP busy flag + // [3] : Receive FIFO full + // [2] : Receive FIFO not empty + // [1] : Transmit FIFO not full + // [0] : Transmit FIFO empty + __IO uint32_t CPSR; // Offset: 0x010 (R/W) Clock prescale register + // [31:8] : Reserved + // [8:0] : Clock prescale divisor + __IO uint32_t IMSC; // Offset: 0x014 (R/W) Interrupt mask set or clear register + // [31:4] : Reserved + // [3] : Transmit FIFO interrupt mask + // [2] : Receive FIFO interrupt mask + // [1] : Receive timeout interrupt mask + // [0] : Receive overrun interrupt mask + __I uint32_t RIS; // Offset: 0x018 (R/ ) Raw interrupt status register + // [31:4] : Reserved + // [3] : raw interrupt state, prior to masking, of the SSPTXINTR interrupt + // [2] : raw interrupt state, prior to masking, of the SSPRXINTR interrupt + // [1] : raw interrupt state, prior to masking, of the SSPRTINTR interrupt + // [0] : raw interrupt state, prior to masking, of the SSPRORINTR interrupt + __I uint32_t MIS; // Offset: 0x01C (R/ ) Masked interrupt status register + // [31:4] : Reserved + // [3] : transmit FIFO masked interrupt state, after masking, of the SSPTXINTR interrupt + // [2] : receive FIFO masked interrupt state, after masking, of the SSPRXINTR interrupt + // [1] : receive timeout masked interrupt state, after masking, of the SSPRTINTR interrupt + // [0] : receive over run masked interrupt status, after masking, of the SSPRORINTR interrupt + __O uint32_t ICR; // Offset: 0x020 ( /W) Interrupt clear register + // [31:2] : Reserved + // [1] : Clears the SSPRTINTR interrupt + // [0] : Clears the SSPRORINTR interrupt + __IO uint32_t DMACR; // Offset: 0x024 (R/W) DMA control register + // [31:2] : Reserved + // [1] : Transmit DMA Enable + // [0] : Receive DMA Enable +} MPS2_SSP_TypeDef; + + +// SSP_CR0 Control register 0 +#define SSP_CR0_DSS_Pos 0 // Data Size Select +#define SSP_CR0_DSS_Msk (0xF<<SSP_CR0_DSS_Pos) +#define SSP_CR0_FRF_Pos 4 // Frame Format Select +#define SSP_CR0_FRF_Msk (3UL<<SSP_CR0_FRM_Pos) +#define SSP_CR0_SPO_Pos 6 // SSPCLKOUT polarity +#define SSP_CR0_SPO_Msk (1UL<<SSP_CR0_SPO_Pos) +#define SSP_CR0_SPH_Pos 7 // SSPCLKOUT phase +#define SSP_CR0_SPH_Msk (1UL<<SSP_CR0_SPH_Pos) +#define SSP_CR0_SCR_Pos 8 // Serial Clock Rate (divide) +#define SSP_CR0_SCR_Msk (0xFF<<SSP_CR0_SCR_Pos) + +#define SSP_CR0_SCR_DFLT 0x0300 // Serial Clock Rate (divide), default set at 3 +#define SSP_CR0_FRF_MOT 0x0000 // Frame format, Motorola +#define SSP_CR0_DSS_8 0x0007 // Data packet size, 8bits +#define SSP_CR0_DSS_16 0x000F // Data packet size, 16bits + +// SSP_CR1 Control register 1 +#define SSP_CR1_LBM_Pos 0 // Loop Back Mode +#define SSP_CR1_LBM_Msk (1UL<<SSP_CR1_LBM_Pos) +#define SSP_CR1_SSE_Pos 1 // Serial port enable +#define SSP_CR1_SSE_Msk (1UL<<SSP_CR1_SSE_Pos) +#define SSP_CR1_MS_Pos 2 // Master or Slave mode +#define SSP_CR1_MS_Msk (1UL<<SSP_CR1_MS_Pos) +#define SSP_CR1_SOD_Pos 3 // Slave Output mode Disable +#define SSP_CR1_SOD_Msk (1UL<<SSP_CR1_SOD_Pos) + +// SSP_SR Status register +#define SSP_SR_TFE_Pos 0 // Transmit FIFO empty +#define SSP_SR_TFE_Msk (1UL<<SSP_SR_TFE_Pos) +#define SSP_SR_TNF_Pos 1 // Transmit FIFO not full +#define SSP_SR_TNF_Msk (1UL<<SSP_SR_TNF_Pos) +#define SSP_SR_RNE_Pos 2 // Receive FIFO not empty +#define SSP_SR_RNE_Msk (1UL<<SSP_SR_RNE_Pos) +#define SSP_SR_RFF_Pos 3 // Receive FIFO full +#define SSP_SR_RFF_Msk (1UL<<SSP_SR_RFF_Pos) +#define SSP_SR_BSY_Pos 4 // Busy +#define SSP_SR_BSY_Msk (1UL<<SSP_SR_BSY_Pos) + +// SSP_CPSR Clock prescale register +#define SSP_CPSR_CPD_Pos 0 // Clock prescale divisor +#define SSP_CPSR_CPD_Msk (0xFF<<SSP_CPSR_CDP_Pos) + +#define SSP_CPSR_DFLT 0x0008 // Clock prescale (use with SCR), default set at 8 + +// SSPIMSC Interrupt mask set and clear register +#define SSP_IMSC_RORIM_Pos 0 // Receive overrun not Masked +#define SSP_IMSC_RORIM_Msk (1UL<<SSP_IMSC_RORIM_Pos) +#define SSP_IMSC_RTIM_Pos 1 // Receive timeout not Masked +#define SSP_IMSC_RTIM_Msk (1UL<<SSP_IMSC_RTIM_Pos) +#define SSP_IMSC_RXIM_Pos 2 // Receive FIFO not Masked +#define SSP_IMSC_RXIM_Msk (1UL<<SSP_IMSC_RXIM_Pos) +#define SSP_IMSC_TXIM_Pos 3 // Transmit FIFO not Masked +#define SSP_IMSC_TXIM_Msk (1UL<<SSP_IMSC_TXIM_Pos) + +// SSPRIS Raw interrupt status register +#define SSP_RIS_RORRIS_Pos 0 // Raw Overrun interrupt flag +#define SSP_RIS_RORRIS_Msk (1UL<<SSP_RIS_RORRIS_Pos) +#define SSP_RIS_RTRIS_Pos 1 // Raw Timemout interrupt flag +#define SSP_RIS_RTRIS_Msk (1UL<<SSP_RIS_RTRIS_Pos) +#define SSP_RIS_RXRIS_Pos 2 // Raw Receive interrupt flag +#define SSP_RIS_RXRIS_Msk (1UL<<SSP_RIS_RXRIS_Pos) +#define SSP_RIS_TXRIS_Pos 3 // Raw Transmit interrupt flag +#define SSP_RIS_TXRIS_Msk (1UL<<SSP_RIS_TXRIS_Pos) + +// SSPMIS Masked interrupt status register +#define SSP_MIS_RORMIS_Pos 0 // Masked Overrun interrupt flag +#define SSP_MIS_RORMIS_Msk (1UL<<SSP_MIS_RORMIS_Pos) +#define SSP_MIS_RTMIS_Pos 1 // Masked Timemout interrupt flag +#define SSP_MIS_RTMIS_Msk (1UL<<SSP_MIS_RTMIS_Pos) +#define SSP_MIS_RXMIS_Pos 2 // Masked Receive interrupt flag +#define SSP_MIS_RXMIS_Msk (1UL<<SSP_MIS_RXMIS_Pos) +#define SSP_MIS_TXMIS_Pos 3 // Masked Transmit interrupt flag +#define SSP_MIS_TXMIS_Msk (1UL<<SSP_MIS_TXMIS_Pos) + +// SSPICR Interrupt clear register +#define SSP_ICR_RORIC_Pos 0 // Clears Overrun interrupt flag +#define SSP_ICR_RORIC_Msk (1UL<<SSP_ICR_RORIC_Pos) +#define SSP_ICR_RTIC_Pos 1 // Clears Timemout interrupt flag +#define SSP_ICR_RTIC_Msk (1UL<<SSP_ICR_RTIC_Pos) + +// SSPDMACR DMA control register +#define SSP_DMACR_RXDMAE_Pos 0 // Enable Receive FIFO DMA +#define SSP_DMACR_RXDMAE_Msk (1UL<<SSP_DMACR_RXDMAE_Pos) +#define SSP_DMACR_TXDMAE_Pos 1 // Enable Transmit FIFO DMA +#define SSP_DMACR_TXDMAE_Msk (1UL<<SSP_DMACR_TXDMAE_Pos) + +/******************************************************************************/ +/* Audio and Touch Screen (I2C) Peripheral declaration */ +/******************************************************************************/ + +typedef struct +{ + union { + __O uint32_t CONTROLS; // Offset: 0x000 CONTROL Set Register ( /W) + __I uint32_t CONTROL; // Offset: 0x000 CONTROL Status Register (R/ ) + }; + __O uint32_t CONTROLC; // Offset: 0x004 CONTROL Clear Register ( /W) +} MPS2_I2C_TypeDef; + +#define SDA 1 << 1 +#define SCL 1 << 0 + + +/******************************************************************************/ +/* Audio I2S Peripheral declaration */ +/******************************************************************************/ + +typedef struct +{ + /*!< Offset: 0x000 CONTROL Register (R/W) */ + __IO uint32_t CONTROL; // <h> CONTROL </h> + // <o.0> TX Enable + // <0=> TX disabled + // <1=> TX enabled + // <o.1> TX IRQ Enable + // <0=> TX IRQ disabled + // <1=> TX IRQ enabled + // <o.2> RX Enable + // <0=> RX disabled + // <1=> RX enabled + // <o.3> RX IRQ Enable + // <0=> RX IRQ disabled + // <1=> RX IRQ enabled + // <o.10..8> TX Buffer Water Level + // <0=> / IRQ triggers when any space available + // <1=> / IRQ triggers when more than 1 space available + // <2=> / IRQ triggers when more than 2 space available + // <3=> / IRQ triggers when more than 3 space available + // <4=> Undefined! + // <5=> Undefined! + // <6=> Undefined! + // <7=> Undefined! + // <o.14..12> RX Buffer Water Level + // <0=> Undefined! + // <1=> / IRQ triggers when less than 1 space available + // <2=> / IRQ triggers when less than 2 space available + // <3=> / IRQ triggers when less than 3 space available + // <4=> / IRQ triggers when less than 4 space available + // <5=> Undefined! + // <6=> Undefined! + // <7=> Undefined! + // <o.16> FIFO reset + // <0=> Normal operation + // <1=> FIFO reset + // <o.17> Audio Codec reset + // <0=> Normal operation + // <1=> Assert audio Codec reset + /*!< Offset: 0x004 STATUS Register (R/ ) */ + __I uint32_t STATUS; // <h> STATUS </h> + // <o.0> TX Buffer alert + // <0=> TX buffer don't need service yet + // <1=> TX buffer need service + // <o.1> RX Buffer alert + // <0=> RX buffer don't need service yet + // <1=> RX buffer need service + // <o.2> TX Buffer Empty + // <0=> TX buffer have data + // <1=> TX buffer empty + // <o.3> TX Buffer Full + // <0=> TX buffer not full + // <1=> TX buffer full + // <o.4> RX Buffer Empty + // <0=> RX buffer have data + // <1=> RX buffer empty + // <o.5> RX Buffer Full + // <0=> RX buffer not full + // <1=> RX buffer full + union { + /*!< Offset: 0x008 Error Status Register (R/ ) */ + __I uint32_t ERROR; // <h> ERROR </h> + // <o.0> TX error + // <0=> Okay + // <1=> TX overrun/underrun + // <o.1> RX error + // <0=> Okay + // <1=> RX overrun/underrun + /*!< Offset: 0x008 Error Clear Register ( /W) */ + __O uint32_t ERRORCLR; // <h> ERRORCLR </h> + // <o.0> TX error + // <0=> Okay + // <1=> Clear TX error + // <o.1> RX error + // <0=> Okay + // <1=> Clear RX error + }; + /*!< Offset: 0x00C Divide ratio Register (R/W) */ + __IO uint32_t DIVIDE; // <h> Divide ratio for Left/Right clock </h> + // <o.9..0> TX error (default 0x80) + /*!< Offset: 0x010 Transmit Buffer ( /W) */ + __O uint32_t TXBUF; // <h> Transmit buffer </h> + // <o.15..0> Right channel + // <o.31..16> Left channel + /*!< Offset: 0x014 Receive Buffer (R/ ) */ + __I uint32_t RXBUF; // <h> Receive buffer </h> + // <o.15..0> Right channel + // <o.31..16> Left channel + uint32_t RESERVED1[186]; + __IO uint32_t ITCR; // <h> Integration Test Control Register </h> + // <o.0> ITEN + // <0=> Normal operation + // <1=> Integration Test mode enable + __O uint32_t ITIP1; // <h> Integration Test Input Register 1</h> + // <o.0> SDIN + __O uint32_t ITOP1; // <h> Integration Test Output Register 1</h> + // <o.0> SDOUT + // <o.1> SCLK + // <o.2> LRCK + // <o.3> IRQOUT +} MPS2_I2S_TypeDef; + +#define I2S_CONTROL_TXEN_Pos 0 +#define I2S_CONTROL_TXEN_Msk (1UL<<I2S_CONTROL_TXEN_Pos) + +#define I2S_CONTROL_TXIRQEN_Pos 1 +#define I2S_CONTROL_TXIRQEN_Msk (1UL<<I2S_CONTROL_TXIRQEN_Pos) + +#define I2S_CONTROL_RXEN_Pos 2 +#define I2S_CONTROL_RXEN_Msk (1UL<<I2S_CONTROL_RXEN_Pos) + +#define I2S_CONTROL_RXIRQEN_Pos 3 +#define I2S_CONTROL_RXIRQEN_Msk (1UL<<I2S_CONTROL_RXIRQEN_Pos) + +#define I2S_CONTROL_TXWLVL_Pos 8 +#define I2S_CONTROL_TXWLVL_Msk (7UL<<I2S_CONTROL_TXWLVL_Pos) + +#define I2S_CONTROL_RXWLVL_Pos 12 +#define I2S_CONTROL_RXWLVL_Msk (7UL<<I2S_CONTROL_RXWLVL_Pos) +/* FIFO reset*/ +#define I2S_CONTROL_FIFORST_Pos 16 +#define I2S_CONTROL_FIFORST_Msk (1UL<<I2S_CONTROL_FIFORST_Pos) +/* Codec reset*/ +#define I2S_CONTROL_CODECRST_Pos 17 +#define I2S_CONTROL_CODECRST_Msk (1UL<<I2S_CONTROL_CODECRST_Pos) + +#define I2S_STATUS_TXIRQ_Pos 0 +#define I2S_STATUS_TXIRQ_Msk (1UL<<I2S_STATUS_TXIRQ_Pos) + +#define I2S_STATUS_RXIRQ_Pos 1 +#define I2S_STATUS_RXIRQ_Msk (1UL<<I2S_STATUS_RXIRQ_Pos) + +#define I2S_STATUS_TXEmpty_Pos 2 +#define I2S_STATUS_TXEmpty_Msk (1UL<<I2S_STATUS_TXEmpty_Pos) + +#define I2S_STATUS_TXFull_Pos 3 +#define I2S_STATUS_TXFull_Msk (1UL<<I2S_STATUS_TXFull_Pos) + +#define I2S_STATUS_RXEmpty_Pos 4 +#define I2S_STATUS_RXEmpty_Msk (1UL<<I2S_STATUS_RXEmpty_Pos) + +#define I2S_STATUS_RXFull_Pos 5 +#define I2S_STATUS_RXFull_Msk (1UL<<I2S_STATUS_RXFull_Pos) + +#define I2S_ERROR_TXERR_Pos 0 +#define I2S_ERROR_TXERR_Msk (1UL<<I2S_ERROR_TXERR_Pos) + +#define I2S_ERROR_RXERR_Pos 1 +#define I2S_ERROR_RXERR_Msk (1UL<<I2S_ERROR_RXERR_Pos) + +/******************************************************************************/ +/* SMSC9220 Register Definitions */ +/******************************************************************************/ + +typedef struct // SMSC LAN9220 +{ +__I uint32_t RX_DATA_PORT; // Receive FIFO Ports (offset 0x0) + uint32_t RESERVED1[0x7]; +__O uint32_t TX_DATA_PORT; // Transmit FIFO Ports (offset 0x20) + uint32_t RESERVED2[0x7]; + +__I uint32_t RX_STAT_PORT; // Receive FIFO status port (offset 0x40) +__I uint32_t RX_STAT_PEEK; // Receive FIFO status peek (offset 0x44) +__I uint32_t TX_STAT_PORT; // Transmit FIFO status port (offset 0x48) +__I uint32_t TX_STAT_PEEK; // Transmit FIFO status peek (offset 0x4C) + +__I uint32_t ID_REV; // Chip ID and Revision (offset 0x50) +__IO uint32_t IRQ_CFG; // Main Interrupt Configuration (offset 0x54) +__IO uint32_t INT_STS; // Interrupt Status (offset 0x58) +__IO uint32_t INT_EN; // Interrupt Enable Register (offset 0x5C) + uint32_t RESERVED3; // Reserved for future use (offset 0x60) +__I uint32_t BYTE_TEST; // Read-only byte order testing register 87654321h (offset 0x64) +__IO uint32_t FIFO_INT; // FIFO Level Interrupts (offset 0x68) +__IO uint32_t RX_CFG; // Receive Configuration (offset 0x6C) +__IO uint32_t TX_CFG; // Transmit Configuration (offset 0x70) +__IO uint32_t HW_CFG; // Hardware Configuration (offset 0x74) +__IO uint32_t RX_DP_CTL; // RX Datapath Control (offset 0x78) +__I uint32_t RX_FIFO_INF; // Receive FIFO Information (offset 0x7C) +__I uint32_t TX_FIFO_INF; // Transmit FIFO Information (offset 0x80) +__IO uint32_t PMT_CTRL; // Power Management Control (offset 0x84) +__IO uint32_t GPIO_CFG; // General Purpose IO Configuration (offset 0x88) +__IO uint32_t GPT_CFG; // General Purpose Timer Configuration (offset 0x8C) +__I uint32_t GPT_CNT; // General Purpose Timer Count (offset 0x90) + uint32_t RESERVED4; // Reserved for future use (offset 0x94) +__IO uint32_t ENDIAN; // WORD SWAP Register (offset 0x98) +__I uint32_t FREE_RUN; // Free Run Counter (offset 0x9C) +__I uint32_t RX_DROP; // RX Dropped Frames Counter (offset 0xA0) +__IO uint32_t MAC_CSR_CMD; // MAC CSR Synchronizer Command (offset 0xA4) +__IO uint32_t MAC_CSR_DATA; // MAC CSR Synchronizer Data (offset 0xA8) +__IO uint32_t AFC_CFG; // Automatic Flow Control Configuration (offset 0xAC) +__IO uint32_t E2P_CMD; // EEPROM Command (offset 0xB0) +__IO uint32_t E2P_DATA; // EEPROM Data (offset 0xB4) + +} SMSC9220_TypeDef; + +// SMSC9220 MAC Registers Indices +#define SMSC9220_MAC_CR 0x1 +#define SMSC9220_MAC_ADDRH 0x2 +#define SMSC9220_MAC_ADDRL 0x3 +#define SMSC9220_MAC_HASHH 0x4 +#define SMSC9220_MAC_HASHL 0x5 +#define SMSC9220_MAC_MII_ACC 0x6 +#define SMSC9220_MAC_MII_DATA 0x7 +#define SMSC9220_MAC_FLOW 0x8 +#define SMSC9220_MAC_VLAN1 0x9 +#define SMSC9220_MAC_VLAN2 0xA +#define SMSC9220_MAC_WUFF 0xB +#define SMSC9220_MAC_WUCSR 0xC + +// SMSC9220 PHY Registers Indices +#define SMSC9220_PHY_BCONTROL 0x0 +#define SMSC9220_PHY_BSTATUS 0x1 +#define SMSC9220_PHY_ID1 0x2 +#define SMSC9220_PHY_ID2 0x3 +#define SMSC9220_PHY_ANEG_ADV 0x4 +#define SMSC9220_PHY_ANEG_LPA 0x5 +#define SMSC9220_PHY_ANEG_EXP 0x6 +#define SMSC9220_PHY_MCONTROL 0x17 +#define SMSC9220_PHY_MSTATUS 0x18 +#define SMSC9220_PHY_CSINDICATE 0x27 +#define SMSC9220_PHY_INTSRC 0x29 +#define SMSC9220_PHY_INTMASK 0x30 +#define SMSC9220_PHY_CS 0x31 + +/******************************************************************************/ +/* Peripheral memory map */ +/******************************************************************************/ + +#define MPS2_SSP1_BASE (0x40020000ul) /* User SSP Base Address */ +#define MPS2_SSP0_BASE (0x40021000ul) /* CLCD SSP Base Address */ +#define MPS2_TSC_I2C_BASE (0x40022000ul) /* Touch Screen I2C Base Address */ +#define MPS2_AAIC_I2C_BASE (0x40023000ul) /* Audio Interface I2C Base Address */ +#define MPS2_AAIC_I2S_BASE (0x40024000ul) /* Audio Interface I2S Base Address */ +#define MPS2_SSP2_BASE (0x40025000ul) /* adc SSP Base Address */ +#define MPS2_SSP3_BASE (0x40026000ul) /* Shield 0 SSP Base Address */ +#define MPS2_SSP4_BASE (0x40027000ul) /* Shield 1 SSP Base Address */ +#define MPS2_FPGAIO_BASE (0x40028000ul) /* FPGAIO Base Address */ +#define MPS2_SHIELD0_I2C_BASE (0x40029000ul) /* Shield 0 I2C Base Address */ +#define MPS2_SHIELD1_I2C_BASE (0x4002A000ul) /* Shield 1 I2C Base Address */ +#define MPS2_SCC_BASE (0x4002F000ul) /* SCC Base Address */ + +#define SMSC9220_BASE (0xA0000000ul) /* Ethernet SMSC9220 Base Address */ + +#define MPS2_VGA_TEXT_BUFFER (0x41000000ul) /* VGA Text Buffer Address */ +#define MPS2_VGA_BUFFER (0x41100000ul) /* VGA Buffer Base Address */ + +/******************************************************************************/ +/* Peripheral declaration */ +/******************************************************************************/ + +#define SMSC9220 ((SMSC9220_TypeDef *) SMSC9220_BASE ) +#define MPS2_TS_I2C ((MPS2_I2C_TypeDef *) MPS2_TSC_I2C_BASE ) +#define MPS2_AAIC_I2C ((MPS2_I2C_TypeDef *) MPS2_AAIC_I2C_BASE ) +#define MPS2_SHIELD0_I2C ((MPS2_I2C_TypeDef *) MPS2_SHIELD0_I2C_BASE ) +#define MPS2_SHIELD1_I2C ((MPS2_I2C_TypeDef *) MPS2_SHIELD1_I2C_BASE ) +#define MPS2_AAIC_I2S ((MPS2_I2S_TypeDef *) MPS2_AAIC_I2S_BASE ) +#define MPS2_FPGAIO ((MPS2_FPGAIO_TypeDef *) MPS2_FPGAIO_BASE ) +#define MPS2_SCC ((MPS2_SCC_TypeDef *) MPS2_SCC_BASE ) +#define MPS2_SSP0 ((MPS2_SSP_TypeDef *) MPS2_SSP0_BASE ) +#define MPS2_SSP1 ((MPS2_SSP_TypeDef *) MPS2_SSP1_BASE ) +#define MPS2_SSP2 ((MPS2_SSP_TypeDef *) MPS2_SSP2_BASE ) +#define MPS2_SSP3 ((MPS2_SSP_TypeDef *) MPS2_SSP3_BASE ) +#define MPS2_SSP4 ((MPS2_SSP_TypeDef *) MPS2_SSP4_BASE ) + +/******************************************************************************/ +/* General Function Definitions */ +/******************************************************************************/ + + +/******************************************************************************/ +/* General MACRO Definitions */ +/******************************************************************************/ + + + +#endif /* __SMM_MPS2_H */