added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
Diff: targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/sleep.c
- Revision:
- 0:9b334a45a8ff
- Child:
- 22:9c52de9bc1d7
diff -r 000000000000 -r 9b334a45a8ff targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/sleep.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/sleep.c Thu Oct 01 15:25:22 2015 +0300 @@ -0,0 +1,117 @@ +/***************************************************************************//** + * @file sleep.c + ******************************************************************************* + * @section License + * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b> + ******************************************************************************* + * + * Permission is granted to anyone to use this software for any purpose, + * including commercial applications, and to alter it and redistribute it + * freely, subject to the following restrictions: + * + * 1. The origin of this software must not be misrepresented; you must not + * claim that you wrote the original software. + * 2. Altered source versions must be plainly marked as such, and must not be + * misrepresented as being the original software. + * 3. This notice may not be removed or altered from any source distribution. + * + * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no + * obligation to support this Software. Silicon Labs is providing the + * Software "AS IS", with no express or implied warranties of any kind, + * including, but not limited to, any implied warranties of merchantability + * or fitness for any particular purpose or warranties against infringement + * of any proprietary rights of a third party. + * + * Silicon Labs will not be liable for any consequential, incidental, or + * special damages, or any other relief, or for any claim by any third party, + * arising from your use of this Software. + * + ******************************************************************************/ + +#include "device.h" +#if DEVICE_SLEEP + +#include "sleep_api.h" +#include "sleepmodes.h" +#include "cmsis.h" +#include "em_emu.h" +#include "em_int.h" + +uint32_t sleep_block_counter[NUM_SLEEP_MODES] = {0}; + +/** + * Sleep mode. + * Enter Energy Mode 1, which turns off the clock to the CPU. + * + * In EM1, the CPU is sleeping and the power consumption is only 50 μA/MHz. + * All peripherals, including DMA, PRS and memory system, are still available. + */ +void sleep(void) +{ + if (sleep_block_counter[0] > 0) { + /* Blocked everything below EM0, so just return */ + return; + } else if (sleep_block_counter[1] > 0) { + /* Blocked everything below EM1, enter EM1 */ + EMU_EnterEM1(); + } else if (sleep_block_counter[2] > 0) { + /* Blocked everything below EM2, enter EM2 */ + EMU_EnterEM2(true); + } else if (sleep_block_counter[3] > 0) { + /* Blocked everything below EM3, enter EM3 */ + EMU_EnterEM3(true); + } else{ + /* Nothing is blocked, enter EM4 */ + EMU_EnterEM4(); + } + return; +} + +/** + * Deep Sleep mode. + * Enter Energy Mode 2, turning off all high-frequency clocks. + * + * In EM2 the high frequency oscillator is turned off, but with the 32.768 kHz + * oscillator running, selected low energy peripherals (LCD, RTC, LETIMER, + * PCNT, LEUART, I2C, LESENSE, OPAMP, USB, WDOG and ACMP) are still + * available. This gives a high degree of autonomous operation with a current + * consumption as low as 1.1 μA with RTC enabled. Power-on Reset, Brown-out + * Detection and full RAM and CPU retention is also included. + */ +void deepsleep(void) +{ + EMU_EnterEM2(true); +} + +/** Block the microcontroller from sleeping below a certain mode + * + * This will block sleep() from entering an energy mode below the one given. + * -- To be called by peripheral HAL's -- + * + * After the peripheral is finished with the operation, it should call unblock with the same state + * + */ +void blockSleepMode(sleepstate_enum minimumMode) +{ + INT_Disable(); + sleep_block_counter[minimumMode]++; + INT_Enable(); +} + +/** Unblock the microcontroller from sleeping below a certain mode + * + * This will unblock sleep() from entering an energy mode below the one given. + * -- To be called by peripheral HAL's -- + * + * This should be called after all transactions on a peripheral are done. + */ +void unblockSleepMode(sleepstate_enum minimumMode) +{ + INT_Disable(); + if(sleep_block_counter[minimumMode] > 0) { + sleep_block_counter[minimumMode]--; + } + INT_Enable(); +} + +#endif