added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
Diff: targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/gpio_api.c
- Revision:
- 0:9b334a45a8ff
- Child:
- 50:a417edff4437
diff -r 000000000000 -r 9b334a45a8ff targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/gpio_api.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/gpio_api.c Thu Oct 01 15:25:22 2015 +0300 @@ -0,0 +1,138 @@ +/***************************************************************************//** + * @file gpio_api.c + ******************************************************************************* + * @section License + * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b> + ******************************************************************************* + * + * Permission is granted to anyone to use this software for any purpose, + * including commercial applications, and to alter it and redistribute it + * freely, subject to the following restrictions: + * + * 1. The origin of this software must not be misrepresented; you must not + * claim that you wrote the original software. + * 2. Altered source versions must be plainly marked as such, and must not be + * misrepresented as being the original software. + * 3. This notice may not be removed or altered from any source distribution. + * + * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no + * obligation to support this Software. Silicon Labs is providing the + * Software "AS IS", with no express or implied warranties of any kind, + * including, but not limited to, any implied warranties of merchantability + * or fitness for any particular purpose or warranties against infringement + * of any proprietary rights of a third party. + * + * Silicon Labs will not be liable for any consequential, incidental, or + * special damages, or any other relief, or for any claim by any third party, + * arising from your use of this Software. + * + ******************************************************************************/ + +#include "gpio_api.h" +#include "pinmap.h" +#include "em_cmu.h" +#include "mbed_assert.h" +#include "sleepmodes.h" + + +void gpio_write(gpio_t *obj, int value) +{ + if (value) { + GPIO_PinOutSet((GPIO_Port_TypeDef)(obj->pin >> 4 & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin + } else { + GPIO_PinOutClear((GPIO_Port_TypeDef)(obj->pin >> 4 & 0xF), obj->pin & 0xF); + } +} + +int gpio_read(gpio_t *obj) +{ + if (obj->dir == PIN_INPUT) { + return GPIO_PinInGet((GPIO_Port_TypeDef)(obj->pin >> 4 & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin + } else { + return GPIO_PinOutGet((GPIO_Port_TypeDef)(obj->pin >> 4 & 0xF), obj->pin & 0xF); + } +} + +int gpio_is_connected(const gpio_t *obj) +{ + return (obj->pin | 0xFFFFFF00 )!= (PinName)NC; +} + +/* + * @return the GPIO port mask for this pin + * Pin and port index encoded in one uint32. + * First four bits represent the pin number + * The remaining bits represent the pin mode + */ +uint32_t gpio_set(PinName pin) +{ + return 1 << ((uint32_t) pin & 0xF); +} + +void gpio_init(gpio_t *obj, PinName pin) +{ + MBED_ASSERT(pin != NC); + + CMU_ClockEnable(cmuClock_HFPER, true); + CMU_ClockEnable(cmuClock_GPIO, true); + obj->pin = pin; +} + +void gpio_mode(gpio_t *obj, PinMode mode) +{ + if(obj->dir == PIN_INPUT) { + switch(mode) { + case PullDefault: + mode = Input; + break; + case PullUp: + mode = InputPullUp; + break; + case PullDown: + mode = InputPullDown; + break; + default: + break; + } + + //Handle DOUT setting + if((mode & 0x10) != 0) { + //Set DOUT + GPIO->P[(obj->pin >> 4) & 0xF].DOUTSET = 1 << (obj->pin & 0xF); + } else { + //Clear DOUT + GPIO->P[(obj->pin >> 4) & 0xF].DOUTCLR = 1 << (obj->pin & 0xF); + } + } else { + switch(mode) { + case PullDefault: + mode = PushPull; + break; + case PullUp: + mode = WiredAndPullUp; + break; + case PullDown: + mode = WiredOrPullDown; + break; + default: + break; + } + } + + obj->mode = mode; // Update object + pin_mode(obj->pin, mode); // Update register +} + +// Used by DigitalInOut to set correct mode when direction is set +void gpio_dir(gpio_t *obj, PinDirection direction) +{ + obj->dir = direction; + switch (direction) { + case PIN_INPUT: + gpio_mode(obj, PullDefault); + break; + case PIN_OUTPUT: + gpio_mode(obj, PullNone); + break; + } +}