added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
Diff: targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/analogout_api.c
- Revision:
- 0:9b334a45a8ff
- Child:
- 50:a417edff4437
diff -r 000000000000 -r 9b334a45a8ff targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/analogout_api.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/analogout_api.c Thu Oct 01 15:25:22 2015 +0300 @@ -0,0 +1,155 @@ +/***************************************************************************//** + * @file analogout_aoi.c + ******************************************************************************* + * @section License + * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b> + ******************************************************************************* + * + * Permission is granted to anyone to use this software for any purpose, + * including commercial applications, and to alter it and redistribute it + * freely, subject to the following restrictions: + * + * 1. The origin of this software must not be misrepresented; you must not + * claim that you wrote the original software. + * 2. Altered source versions must be plainly marked as such, and must not be + * misrepresented as being the original software. + * 3. This notice may not be removed or altered from any source distribution. + * + * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no + * obligation to support this Software. Silicon Labs is providing the + * Software "AS IS", with no express or implied warranties of any kind, + * including, but not limited to, any implied warranties of merchantability + * or fitness for any particular purpose or warranties against infringement + * of any proprietary rights of a third party. + * + * Silicon Labs will not be liable for any consequential, incidental, or + * special damages, or any other relief, or for any claim by any third party, + * arising from your use of this Software. + * + ******************************************************************************/ + +#include "device.h" +#if DEVICE_ANALOGOUT + +#include "mbed_assert.h" +#include "error.h" +#include "analogout_api.h" +#include "pinmap.h" +#include "pinmap_function.h" +#include "PeripheralPins.h" +#include "clocking.h" + +#include "em_dac.h" +#include "em_cmu.h" + +uint8_t analogout_get_index(dac_t *obj) +{ + return 0; +} + +void analogout_preinit(dac_t *obj, PinName pin) +{ + obj->dac = (DAC_TypeDef *) pinmap_peripheral(pin, PinMap_DAC); + MBED_ASSERT((int) obj->dac != NC); + + obj->channel = pin_location(pin, PinMap_DAC); + MBED_ASSERT((int) obj->channel != NC); +} + +void analogout_init(dac_t *obj, PinName pin) +{ + static uint8_t dac_initialized = 0; + + /* init in-memory structure */ + analogout_preinit(obj, pin); + + if (!dac_initialized) { + /* Initialize the DAC. Will disable both DAC channels, so should only be done once */ + /* Use default settings */ + CMU_ClockEnable(cmuClock_DAC0, true); + + DAC_Init_TypeDef init = DAC_INIT_DEFAULT; + + /* Calculate the DAC clock prescaler value that will result in a DAC clock + * close to 500kHz. Second parameter is zero. This uses the current HFPERCLK + * frequency instead of setting a new one. */ + init.prescale = DAC_PrescaleCalc(500000, REFERENCE_FREQUENCY); + + /* Set reference voltage to VDD */ + init.reference = dacRefVDD; + + DAC_Init(obj->dac, &init); + dac_initialized = 1; + } + /* Use default channel settings */ + DAC_InitChannel_TypeDef initChannel = DAC_INITCHANNEL_DEFAULT; + DAC_InitChannel(obj->dac, &initChannel, obj->channel); + + +} + +void analogout_enable(dac_t *obj, uint8_t enable) +{ + DAC_Enable(obj->dac, obj->channel, enable); +} + +void analogout_pins_enable(dac_t *obj, uint8_t enable) +{ + //not avail for EFM32 +} + +static inline void dac_write(dac_t *obj, int value) +{ + switch (obj->channel) { + case 0: + obj->dac->CH0DATA = value; + break; + case 1: + obj->dac->CH1DATA = value; + break; + } +} + +static inline int dac_read(dac_t *obj) +{ + switch (obj->channel) { + case 0: + return obj->dac->CH0DATA; + break; + case 1: + return obj->dac->CH1DATA; + break; + default: + error("AnalogOut pin error. Invalid channel"); + return -1; + break; + } +} + +void analogout_write(dac_t *obj, float value) +{ + /* We multiply the float value with 0xFFF because the DAC has 12-bit resolution. + * Ie. accepts values between 0 and 0xFFF (4096). */ + dac_write(obj, value*0xFFF); +} + +void analogout_write_u16(dac_t *obj, uint16_t value) +{ + /* The DAC has 12 bit resolution, so we remove the 4 least significant bits */ + dac_write(obj, value >> 4); +} + +float analogout_read(dac_t *obj) +{ + /* dac_read returns a number between 0 and 0xFFF. Division gives us a float between 0 and 1 */ + return dac_read(obj)/(float)0xFFF; +} + +uint16_t analogout_read_u16(dac_t *obj) +{ + /* dac_read returns a number with 12 significant digits, + * so we shift in 0s from right to make it a 16 bit number */ + return dac_read(obj) << 4; +} + +#endif