added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
targets/hal/TARGET_Freescale/TARGET_KSDK2_MCUS/TARGET_MCU_K64F/storage_driver.c
- Committer:
- <>
- Date:
- 2016-09-02
- Revision:
- 144:ef7eb2e8f9f7
File content as of revision 144:ef7eb2e8f9f7:
/* * Copyright (c) 2006-2016, ARM Limited, All Rights Reserved * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #if DEVICE_STORAGE #include "Driver_Storage.h" #include "cmsis_nvic.h" #include "MK64F12.h" #if defined(MCU_MEM_MAP_VERSION) && ((MCU_MEM_MAP_VERSION > 0x0200u) || ((MCU_MEM_MAP_VERSION == 0x0200u) && (MCU_MEM_MAP_VERSION_MINOR >= 0x0008u))) #define USING_KSDK2 1 #endif #ifndef USING_KSDK2 #include "device/MK64F12/MK64F12_ftfe.h" #else #include "fsl_flash.h" #endif #include <string.h> #ifdef USING_KSDK2 /*! * @name Misc utility defines * @{ */ #ifndef ALIGN_DOWN #define ALIGN_DOWN(x, a) ((x) & (uint32_t)(-((int32_t)(a)))) #endif #ifndef ALIGN_UP #define ALIGN_UP(x, a) (-((int32_t)((uint32_t)(-((int32_t)(x))) & (uint32_t)(-((int32_t)(a)))))) #endif #define BYTES_JOIN_TO_WORD_1_3(x, y) ((((uint32_t)(x)&0xFFU) << 24) | ((uint32_t)(y)&0xFFFFFFU)) #define BYTES_JOIN_TO_WORD_2_2(x, y) ((((uint32_t)(x)&0xFFFFU) << 16) | ((uint32_t)(y)&0xFFFFU)) #define BYTES_JOIN_TO_WORD_3_1(x, y) ((((uint32_t)(x)&0xFFFFFFU) << 8) | ((uint32_t)(y)&0xFFU)) #define BYTES_JOIN_TO_WORD_1_1_2(x, y, z) \ ((((uint32_t)(x)&0xFFU) << 24) | (((uint32_t)(y)&0xFFU) << 16) | ((uint32_t)(z)&0xFFFFU)) #define BYTES_JOIN_TO_WORD_1_2_1(x, y, z) \ ((((uint32_t)(x)&0xFFU) << 24) | (((uint32_t)(y)&0xFFFFU) << 8) | ((uint32_t)(z)&0xFFU)) #define BYTES_JOIN_TO_WORD_2_1_1(x, y, z) \ ((((uint32_t)(x)&0xFFFFU) << 16) | (((uint32_t)(y)&0xFFU) << 8) | ((uint32_t)(z)&0xFFU)) #define BYTES_JOIN_TO_WORD_1_1_1_1(x, y, z, w) \ ((((uint32_t)(x)&0xFFU) << 24) | (((uint32_t)(y)&0xFFU) << 16) | (((uint32_t)(z)&0xFFU) << 8) | \ ((uint32_t)(w)&0xFFU)) /*@}*/ /*! * @name Common flash register info defines * @{ */ #if defined(FTFA) #define FTFx FTFA #define FTFx_BASE FTFA_BASE #define FTFx_FSTAT_CCIF_MASK FTFA_FSTAT_CCIF_MASK #define FTFx_FSTAT_RDCOLERR_MASK FTFA_FSTAT_RDCOLERR_MASK #define FTFx_FSTAT_ACCERR_MASK FTFA_FSTAT_ACCERR_MASK #define FTFx_FSTAT_FPVIOL_MASK FTFA_FSTAT_FPVIOL_MASK #define FTFx_FSTAT_MGSTAT0_MASK FTFA_FSTAT_MGSTAT0_MASK #define FTFx_FSEC_SEC_MASK FTFA_FSEC_SEC_MASK #define FTFx_FSEC_KEYEN_MASK FTFA_FSEC_KEYEN_MASK #define FTFx_FCNFG_CCIF_MASK FTFA_FCNFG_CCIE_MASK #if defined(FSL_FEATURE_FLASH_HAS_FLEX_RAM) && FSL_FEATURE_FLASH_HAS_FLEX_RAM #define FTFx_FCNFG_RAMRDY_MASK FTFA_FCNFG_RAMRDY_MASK #endif /* FSL_FEATURE_FLASH_HAS_FLEX_RAM */ #if defined(FSL_FEATURE_FLASH_HAS_FLEX_NVM) && FSL_FEATURE_FLASH_HAS_FLEX_NVM #define FTFx_FCNFG_EEERDY_MASK FTFA_FCNFG_EEERDY_MASK #endif /* FSL_FEATURE_FLASH_HAS_FLEX_NVM */ #elif defined(FTFE) #define FTFx FTFE #define FTFx_BASE FTFE_BASE #define FTFx_FSTAT_CCIF_MASK FTFE_FSTAT_CCIF_MASK #define FTFx_FSTAT_RDCOLERR_MASK FTFE_FSTAT_RDCOLERR_MASK #define FTFx_FSTAT_ACCERR_MASK FTFE_FSTAT_ACCERR_MASK #define FTFx_FSTAT_FPVIOL_MASK FTFE_FSTAT_FPVIOL_MASK #define FTFx_FSTAT_MGSTAT0_MASK FTFE_FSTAT_MGSTAT0_MASK #define FTFx_FSEC_SEC_MASK FTFE_FSEC_SEC_MASK #define FTFx_FSEC_KEYEN_MASK FTFE_FSEC_KEYEN_MASK #define FTFx_FCNFG_CCIF_MASK FTFE_FCNFG_CCIE_MASK #if defined(FSL_FEATURE_FLASH_HAS_FLEX_RAM) && FSL_FEATURE_FLASH_HAS_FLEX_RAM #define FTFx_FCNFG_RAMRDY_MASK FTFE_FCNFG_RAMRDY_MASK #endif /* FSL_FEATURE_FLASH_HAS_FLEX_RAM */ #if defined(FSL_FEATURE_FLASH_HAS_FLEX_NVM) && FSL_FEATURE_FLASH_HAS_FLEX_NVM #define FTFx_FCNFG_EEERDY_MASK FTFE_FCNFG_EEERDY_MASK #endif /* FSL_FEATURE_FLASH_HAS_FLEX_NVM */ #elif defined(FTFL) #define FTFx FTFL #define FTFx_BASE FTFL_BASE #define FTFx_FSTAT_CCIF_MASK FTFL_FSTAT_CCIF_MASK #define FTFx_FSTAT_RDCOLERR_MASK FTFL_FSTAT_RDCOLERR_MASK #define FTFx_FSTAT_ACCERR_MASK FTFL_FSTAT_ACCERR_MASK #define FTFx_FSTAT_FPVIOL_MASK FTFL_FSTAT_FPVIOL_MASK #define FTFx_FSTAT_MGSTAT0_MASK FTFL_FSTAT_MGSTAT0_MASK #define FTFx_FSEC_SEC_MASK FTFL_FSEC_SEC_MASK #define FTFx_FSEC_KEYEN_MASK FTFL_FSEC_KEYEN_MASK #define FTFx_FCNFG_CCIF_MASK FTFL_FCNFG_CCIE_MASK #if defined(FSL_FEATURE_FLASH_HAS_FLEX_RAM) && FSL_FEATURE_FLASH_HAS_FLEX_RAM #define FTFx_FCNFG_RAMRDY_MASK FTFL_FCNFG_RAMRDY_MASK #endif /* FSL_FEATURE_FLASH_HAS_FLEX_RAM */ #if defined(FSL_FEATURE_FLASH_HAS_FLEX_NVM) && FSL_FEATURE_FLASH_HAS_FLEX_NVM #define FTFx_FCNFG_EEERDY_MASK FTFL_FCNFG_EEERDY_MASK #endif /* FSL_FEATURE_FLASH_HAS_FLEX_NVM */ #else #error "Unknown flash controller" #endif /*@}*/ /*! @brief Access to FTFx->FCCOB */ extern volatile uint32_t *const kFCCOBx; #endif /* #ifdef USING_KSDK2 */ #ifdef USING_KSDK2 #define ERASE_UNIT (FSL_FEATURE_FLASH_PFLASH_BLOCK_SECTOR_SIZE) #define BLOCK1_START_ADDR (FSL_FEATURE_FLASH_PFLASH_BLOCK_SIZE) #define BLOCK1_SIZE (FSL_FEATURE_FLASH_PFLASH_BLOCK_SIZE) #define PROGRAM_UNIT (FSL_FEATURE_FLASH_PFLASH_BLOCK_WRITE_UNIT_SIZE) #define OPTIMAL_PROGRAM_UNIT (1024UL) #define PROGRAM_PHRASE_SIZEOF_INLINE_DATA (8) #define SIZEOF_DOUBLE_PHRASE (FSL_FEATURE_FLASH_PFLASH_SECTION_CMD_ADDRESS_ALIGMENT) #else /* ifdef USING_KSDK2 */ #define ERASE_UNIT (4096) #define BLOCK1_START_ADDR (0x80000UL) #define BLOCK1_SIZE (0x80000UL) #define PROGRAM_UNIT (8UL) #define OPTIMAL_PROGRAM_UNIT (1024UL) #define PROGRAM_PHRASE_SIZEOF_INLINE_DATA (8) #define SIZEOF_DOUBLE_PHRASE (16) #endif /* #ifdef USING_KSDK2 */ /* * forward declarations */ static int32_t getBlock(uint64_t addr, ARM_STORAGE_BLOCK *blockP); static int32_t nextBlock(const ARM_STORAGE_BLOCK* prevP, ARM_STORAGE_BLOCK *nextP); /* * Global state for the driver. */ struct mtd_k64f_data { ARM_Storage_Callback_t commandCompletionCallback; bool initialized; ARM_POWER_STATE powerState; ARM_STORAGE_OPERATION currentCommand; uint64_t currentOperatingStorageAddress; size_t sizeofCurrentOperation; size_t amountLeftToOperate; const uint8_t *currentOperatingData; } mtd_k64f_data; /* * Static configuration. */ static const ARM_STORAGE_BLOCK blockTable[] = { { /**< This is the start address of the flash block. */ #ifdef DEVICE_STORAGE_CONFIG_HARDWARE_MTD_K64F_START_ADDR .addr = DEVICE_STORAGE_CONFIG_HARDWARE_MTD_K64F_START_ADDR, #else .addr = BLOCK1_START_ADDR, #endif /**< This is the size of the flash block, in units of bytes. * Together with addr, it describes a range [addr, addr+size). */ #ifdef DEVICE_STORAGE_CONFIG_HARDWARE_MTD_K64F_SIZE .size = DEVICE_STORAGE_CONFIG_HARDWARE_MTD_K64F_SIZE, #else .size = BLOCK1_SIZE, #endif .attributes = { /**< Attributes for this block. */ .erasable = 1, .programmable = 1, .executable = 1, .protectable = 1, .erase_unit = ERASE_UNIT, .protection_unit = BLOCK1_SIZE / 32, } } }; static const ARM_DRIVER_VERSION version = { .api = ARM_STORAGE_API_VERSION, .drv = ARM_DRIVER_VERSION_MAJOR_MINOR(1,00) }; #if (!defined(DEVICE_STORAGE_CONFIG_HARDWARE_MTD_K64F_ASYNC_OPS) || DEVICE_STORAGE_CONFIG_HARDWARE_MTD_K64F_ASYNC_OPS) #define ASYNC_OPS 1 #else #define ASYNC_OPS 0 #endif static const ARM_STORAGE_CAPABILITIES caps = { /**< Signal Flash Ready event. In other words, can APIs like initialize, * read, erase, program, etc. operate in asynchronous mode? * Setting this bit to 1 means that the driver is capable of launching * asynchronous operations; command completion is signaled by the * generation of an event or the invocation of a completion callback * (depending on how the flash controller has been initialized). If set to * 1, drivers may still complete asynchronous operations synchronously as * necessary--in which case they return a positive error code to indicate * synchronous completion. */ .asynchronous_ops = ASYNC_OPS, /* Enable chip-erase functionality if we own all of block-1. */ #if ((!defined (DEVICE_STORAGE_CONFIG_HARDWARE_MTD_K64F_START_ADDR) || (DEVICE_STORAGE_CONFIG_HARDWARE_MTD_K64F_START_ADDR == BLOCK1_START_ADDR)) && \ (!defined (DEVICE_STORAGE_CONFIG_HARDWARE_MTD_K64F_SIZE) || (DEVICE_STORAGE_CONFIG_HARDWARE_MTD_K64F_SIZE == BLOCK1_SIZE))) .erase_all = 1, /**< Supports EraseChip operation. */ #else .erase_all = 0, /**< Supports EraseChip operation. */ #endif }; static const ARM_STORAGE_INFO info = { #ifdef DEVICE_STORAGE_CONFIG_HARDWARE_MTD_K64F_SIZE .total_storage = DEVICE_STORAGE_CONFIG_HARDWARE_MTD_K64F_SIZE, /**< Total available storage, in units of octets. */ #else .total_storage = BLOCK1_SIZE, /**< Total available storage, in units of octets. By default, BLOCK0 is reserved to hold program code. */ #endif .program_unit = PROGRAM_UNIT, .optimal_program_unit = OPTIMAL_PROGRAM_UNIT, .program_cycles = ARM_STORAGE_PROGRAM_CYCLES_INFINITE, /**< A measure of endurance for reprogramming. * Use ARM_STOR_PROGRAM_CYCLES_INFINITE for infinite or unknown endurance. */ .erased_value = 0x1, /**< Contents of erased memory (1 to indicate erased octets with state 0xFF). */ .memory_mapped = 1, .programmability = ARM_STORAGE_PROGRAMMABILITY_ERASABLE, /**< A value of type enum ARM_STOR_PROGRAMMABILITY. */ .retention_level = ARM_RETENTION_NVM, .security = { .acls = 0, /**< against internal software attacks using ACLs. */ .rollback_protection = 0, /**< roll-back protection. */ .tamper_proof = 0, /**< tamper-proof memory (will be deleted on tamper-attempts using board level or chip level sensors). */ .internal_flash = 1, /**< Internal flash. */ .software_attacks = 0, .board_level_attacks = 0, .chip_level_attacks = 0, .side_channel_attacks = 0, } }; /** * This is the command code written into the first FCCOB register, FCCOB0. */ enum FlashCommandOps { RD1SEC = (uint8_t)0x01, /* read 1s section */ PGM8 = (uint8_t)0x07, /* program phrase */ ERSBLK = (uint8_t)0x08, /* erase block */ ERSSCR = (uint8_t)0x09, /* erase flash sector */ PGMSEC = (uint8_t)0x0B, /* program section */ SETRAM = (uint8_t)0x81, /* Set FlexRAM. (unused for now) */ }; /** * Read out the CCIF (Command Complete Interrupt Flag) to ensure all previous * operations have completed. */ static inline bool controllerCurrentlyBusy(void) { #ifdef USING_KSDK2 return ((FTFx->FSTAT & FTFx_FSTAT_CCIF_MASK) == 0); #else return (BR_FTFE_FSTAT_CCIF(FTFE) == 0); #endif } static inline bool failedWithAccessError(void) { #ifdef USING_KSDK2 /* Get flash status register value */ uint8_t registerValue = FTFx->FSTAT; /* checking access error */ return registerValue & FTFx_FSTAT_ACCERR_MASK; #else /* ifdef USING_KSDK2 */ return BR_FTFE_FSTAT_ACCERR(FTFE); #endif /* ifdef USING_KSDK2 */ } static inline bool failedWithProtectionError() { #ifdef USING_KSDK2 /* Get flash status register value */ uint8_t registerValue = FTFx->FSTAT; /* checking protection error */ return registerValue & FTFx_FSTAT_FPVIOL_MASK; #else /* ifdef USING_KSDK2 */ return BR_FTFE_FSTAT_FPVIOL(FTFE); #endif /* ifdef USING_KSDK2 */ } static inline bool failedWithRunTimeError() { #ifdef USING_KSDK2 /* Get flash status register value */ uint8_t registerValue = FTFx->FSTAT; /* checking MGSTAT0 non-correctable error */ return registerValue & FTFx_FSTAT_MGSTAT0_MASK; #else /* ifdef USING_KSDK2 */ return BR_FTFE_FSTAT_MGSTAT0(FTFE); #endif /* ifdef USING_KSDK2 */ } static inline void clearAccessError(void) { #ifdef USING_KSDK2 FTFx->FSTAT |= FTFx_FSTAT_ACCERR_MASK; #else BW_FTFE_FSTAT_ACCERR(FTFE, 1); #endif } static inline void clearProtectionError(void) { #ifdef USING_KSDK2 FTFx->FSTAT |= FTFx_FSTAT_FPVIOL_MASK; #else BW_FTFE_FSTAT_FPVIOL(FTFE, 1); #endif } /** * @brief Clear the error bits before launching a command. * * The ACCERR error bit indicates an illegal access has occurred to an FTFE * resource caused by a violation of the command write sequence or issuing an * illegal FTFE command. While ACCERR is set, the CCIF flag cannot be cleared to * launch a command. The ACCERR bit is cleared by writing a 1 to it. * * The FPVIOL error bit indicates an attempt was made to program or erase an * address in a protected area of program flash or data flash memory during a * command write sequence or a write was attempted to a protected area of the * FlexRAM while enabled for EEPROM. While FPVIOL is set, the CCIF flag cannot * be cleared to launch a command. The FPVIOL bit is cleared by writing a 1 to * it. */ static inline void clearErrorStatusBits() { if (failedWithAccessError()) { clearAccessError(); } if (failedWithProtectionError()) { clearProtectionError(); } } /* The following functions are only needed if using interrupt-driven operation. */ #if ASYNC_OPS static inline void enableCommandCompletionInterrupt(void) { #ifdef USING_KSDK2 FTFx->FCNFG |= FTFE_FCNFG_CCIE_MASK; #else BW_FTFE_FCNFG_CCIE((uintptr_t)FTFE, 1); /* enable interrupt to detect CCIE being set. */ #endif } static inline void disbleCommandCompletionInterrupt(void) { #ifdef USING_KSDK2 FTFx->FCNFG &= ~FTFE_FCNFG_CCIE_MASK; #else BW_FTFE_FCNFG_CCIE((uintptr_t)FTFE, 0); /* disable command completion interrupt. */ #endif } static inline bool commandCompletionInterruptEnabled(void) { #ifdef USING_KSDK2 return ((FTFx->FCNFG & FTFE_FCNFG_CCIE_MASK) != 0); #else return (BR_FTFE_FCNFG_CCIE((uintptr_t)FTFE) != 0); #endif } /** * Once all relevant command parameters have been loaded, the user launches the * command by clearing the FSTAT[CCIF] bit by writing a '1' to it. The CCIF flag * remains zero until the FTFE command completes. */ static inline void launchCommand(void) { #ifdef USING_KSDK2 FTFx->FSTAT = FTFx_FSTAT_CCIF_MASK; #else BW_FTFE_FSTAT_CCIF(FTFE, 1); #endif } #else /* #if !ASYNC_OPS */ static void launchCommandAndWaitForCompletion() { // It contains the inlined equivalent of the following code snippet: // launchCommand(); // while (controllerCurrentlyBusy()) { // /* Spin waiting for the command execution to complete. */ // } FTFx->FSTAT = FTFx_FSTAT_CCIF_MASK; /* launchcommand() */ while ((FTFx->FSTAT & FTFx_FSTAT_CCIF_MASK) == 0) { /* Spin waiting for the command execution to complete. */ } } #endif /* #if !ASYNC_OPS */ #ifndef USING_KSDK2 static inline void setupAddressInCCOB123(uint64_t addr) { BW_FTFE_FCCOB1_CCOBn((uintptr_t)FTFE, (addr >> 16) & 0xFFUL); /* bits [23:16] of the address. */ BW_FTFE_FCCOB2_CCOBn((uintptr_t)FTFE, (addr >> 8) & 0xFFUL); /* bits [15:8] of the address. */ BW_FTFE_FCCOB3_CCOBn((uintptr_t)FTFE, (addr >> 0) & 0xFFUL); /* bits [7:0] of the address. */ } #endif /* ifndef USING_KSDK2 */ static inline void setupRead1sSection(uint64_t addr, size_t cnt) { #ifdef USING_KSDK2 kFCCOBx[0] = BYTES_JOIN_TO_WORD_1_3(RD1SEC, addr); kFCCOBx[1] = BYTES_JOIN_TO_WORD_2_1_1(cnt >> 4, 0 /* normal read level */, 0); #else BW_FTFE_FCCOB0_CCOBn((uintptr_t)FTFE, RD1SEC); setupAddressInCCOB123(addr); BW_FTFE_FCCOB4_CCOBn((uintptr_t)FTFE, ((cnt >> 4) >> 8) & 0xFFUL); /* bits [15:8] of cnt in units of 128-bits. */ BW_FTFE_FCCOB5_CCOBn((uintptr_t)FTFE, ((cnt >> 4) >> 0) & 0xFFUL); /* bits [7:0] of cnt in units of 128-bits. */ BW_FTFE_FCCOB6_CCOBn((uintptr_t)FTFE, 0); /* use normal read level for 1s. */ #endif } static inline bool currentCommandByteIsRD1SEC(void) { #ifdef USING_KSDK2 return ((kFCCOBx[0] >> 24) == RD1SEC); #else return (BR_FTFE_FCCOB0_CCOBn((uintptr_t)FTFE) == RD1SEC); #endif } static inline bool currentCommandSetupIsAnEraseCheck(const struct mtd_k64f_data *context) { return ((context->currentCommand == ARM_STORAGE_OPERATION_ERASE) && currentCommandByteIsRD1SEC()); } static inline void setupEraseSector(uint64_t addr) { #ifdef USING_KSDK2 kFCCOBx[0] = BYTES_JOIN_TO_WORD_1_3(ERSSCR, addr); #else BW_FTFE_FCCOB0_CCOBn((uintptr_t)FTFE, ERSSCR); setupAddressInCCOB123(addr); #endif } static inline void setupEraseBlock(uint64_t addr) { #ifdef USING_KSDK2 kFCCOBx[0] = BYTES_JOIN_TO_WORD_1_3(ERSBLK, addr); #else BW_FTFE_FCCOB0_CCOBn((uintptr_t)FTFE, ERSBLK); setupAddressInCCOB123(addr); #endif } static inline void setup8ByteWrite(uint64_t addr, const void *data) { /* Program FCCOB to load the required command parameters. */ #ifdef USING_KSDK2 kFCCOBx[0] = BYTES_JOIN_TO_WORD_1_3(PGM8, addr); /* Program 8 bytes of data into FCCOB(4..11)_CCOBn */ kFCCOBx[1] = ((const uint32_t *)data)[0]; kFCCOBx[2] = ((const uint32_t *)data)[1]; #else /* ifdef USING_KSDK2 */ BW_FTFE_FCCOB0_CCOBn((uintptr_t)FTFE, PGM8); setupAddressInCCOB123(addr); BW_FTFE_FCCOB4_CCOBn((uintptr_t)FTFE, ((const uint8_t *)data)[3]); /* byte 3 of program value. */ BW_FTFE_FCCOB5_CCOBn((uintptr_t)FTFE, ((const uint8_t *)data)[2]); /* byte 2 of program value. */ BW_FTFE_FCCOB6_CCOBn((uintptr_t)FTFE, ((const uint8_t *)data)[1]); /* byte 1 of program value. */ BW_FTFE_FCCOB7_CCOBn((uintptr_t)FTFE, ((const uint8_t *)data)[0]); /* byte 0 of program value. */ BW_FTFE_FCCOB8_CCOBn((uintptr_t)FTFE, ((const uint8_t *)data)[7]); /* byte 7 of program value. */ BW_FTFE_FCCOB9_CCOBn((uintptr_t)FTFE, ((const uint8_t *)data)[6]); /* byte 6 of program value. */ BW_FTFE_FCCOBA_CCOBn((uintptr_t)FTFE, ((const uint8_t *)data)[5]); /* byte 5 of program value. */ BW_FTFE_FCCOBB_CCOBn((uintptr_t)FTFE, ((const uint8_t *)data)[4]); /* byte 4 of program value. */ #endif /* ifdef USING_KSDK2 */ } static inline void setupProgramSection(uint64_t addr, const void *data, size_t cnt) { #ifdef USING_KSDK2 static const uintptr_t FlexRAMBase = FSL_FEATURE_FLASH_FLEX_RAM_START_ADDRESS; memcpy((void *)FlexRAMBase, (const uint8_t *)data, cnt); kFCCOBx[0] = BYTES_JOIN_TO_WORD_1_3(PGMSEC, addr); kFCCOBx[1] = BYTES_JOIN_TO_WORD_2_2(cnt >> 4, 0xFFFFU); #else /* ifdef USING_KSDK2 */ static const uintptr_t FlexRAMBase = 0x14000000; memcpy((void *)FlexRAMBase, (const uint8_t *)data, cnt); BW_FTFE_FCCOB0_CCOBn((uintptr_t)FTFE, PGMSEC); setupAddressInCCOB123(addr); BW_FTFE_FCCOB4_CCOBn((uintptr_t)FTFE, ((((uint32_t)(cnt >> 4)) & (0x0000FF00)) >> 8)); /* number of 128-bits to program [15:8] */ BW_FTFE_FCCOB5_CCOBn((uintptr_t)FTFE, (((uint32_t)(cnt >> 4)) & (0x000000FF))); /* number of 128-bits to program [7:0] */ #endif /* ifdef USING_KSDK2 */ } /** * Compute the size of the largest 'program-section' operation which is * possible for the range [addr, addr+size) starting from addr. It is assumed * that 'addr' is aligned to a double-phrase boundary (see \ref * SIZEOF_DOUBLE_PHRASE)--if not, then only a single phrase (8-bytes) write is possible. */ static inline size_t sizeofLargestProgramSection(uint64_t addr, size_t size) { /* ensure 'size' is aligned to a double-phrase boundary */ if ((size % SIZEOF_DOUBLE_PHRASE) == PROGRAM_PHRASE_SIZEOF_INLINE_DATA) { size -= PROGRAM_PHRASE_SIZEOF_INLINE_DATA; } /* ensure 'size' isn't larger than OPTIMAL_PROGRAM_UNIT */ if (size > OPTIMAL_PROGRAM_UNIT) { size = OPTIMAL_PROGRAM_UNIT; } /* ensure that the operation doesn't cross an erase boundary */ size_t amountLeftInEraseUnit = ERASE_UNIT - (size_t)(addr % ERASE_UNIT); if (size > amountLeftInEraseUnit) { size = amountLeftInEraseUnit; } return size; } /** * Advance the state machine for program-data. This function is called only if * amountLeftToOperate is non-zero. */ static inline void setupNextProgramData(struct mtd_k64f_data *context) { if ((context->amountLeftToOperate == PROGRAM_PHRASE_SIZEOF_INLINE_DATA) || ((context->currentOperatingStorageAddress % SIZEOF_DOUBLE_PHRASE) == PROGRAM_PHRASE_SIZEOF_INLINE_DATA)) { setup8ByteWrite(context->currentOperatingStorageAddress, context->currentOperatingData); context->amountLeftToOperate -= PROGRAM_PHRASE_SIZEOF_INLINE_DATA; context->currentOperatingStorageAddress += PROGRAM_PHRASE_SIZEOF_INLINE_DATA; context->currentOperatingData += PROGRAM_PHRASE_SIZEOF_INLINE_DATA; } else { size_t amount = sizeofLargestProgramSection(context->currentOperatingStorageAddress, context->amountLeftToOperate); setupProgramSection(context->currentOperatingStorageAddress, context->currentOperatingData, amount); context->amountLeftToOperate -= amount; context->currentOperatingStorageAddress += amount; context->currentOperatingData += amount; } } /* Setup a command to determine if erase is needed for the range * [context->currentOperatingStorageAddress, context->currentOperatingStorageAddress + ERASE_UNIT). * If any byte within the range isn't 0xFF, this command results in a run-time * error. * * Upon launch, if any byte within the given range isn't 0xFF then this command * will terminate in a run-time error. */ static inline void setupNextEraseCheck(const struct mtd_k64f_data *context) { setupRead1sSection(context->currentOperatingStorageAddress, ERASE_UNIT); /* setup check for erased */ } static inline void progressEraseContextByEraseUnit(struct mtd_k64f_data *context) { context->amountLeftToOperate -= ERASE_UNIT; context->currentOperatingStorageAddress += ERASE_UNIT; } /** * Advance the state machine for erase. This function is called only if * amountLeftToOperate is non-zero. */ static inline void setupNextErase(struct mtd_k64f_data *context) { setupEraseSector(context->currentOperatingStorageAddress); /* Program FCCOB to load the required command parameters. */ progressEraseContextByEraseUnit(context); } static int32_t executeCommand(struct mtd_k64f_data *context) { #if ASYNC_OPS /* Asynchronous operation */ (void)context; /* avoid compiler warning about un-used variables */ launchCommand(); /* At this point, The FTFE reads the command code and performs a series of * parameter checks and protection checks, if applicable, which are unique * to each command. */ /* Spin waiting for the command execution to begin. */ while (!controllerCurrentlyBusy() && !failedWithAccessError() && !failedWithProtectionError()); if (failedWithAccessError() || failedWithProtectionError()) { clearErrorStatusBits(); return ARM_DRIVER_ERROR_PARAMETER; } enableCommandCompletionInterrupt(); return ARM_DRIVER_OK; /* signal asynchronous completion. An interrupt will signal completion later. */ #else /* #if ASYNC_OPS */ /* Synchronous operation. */ while (1) { launchCommandAndWaitForCompletion(); /* Execution may result in failure. Check for errors */ if (failedWithAccessError() || failedWithProtectionError()) { clearErrorStatusBits(); return ARM_DRIVER_ERROR_PARAMETER; } if (failedWithRunTimeError()) { /* filter away run-time errors which may legitimately arise from an erase-check operation. */ if (!currentCommandSetupIsAnEraseCheck(context)) { return ARM_STORAGE_ERROR_RUNTIME_OR_INTEGRITY_FAILURE; } } /* signal synchronous completion. */ switch (context->currentCommand) { case ARM_STORAGE_OPERATION_PROGRAM_DATA: if (context->amountLeftToOperate == 0) { return context->sizeofCurrentOperation; } /* start the successive program operation */ setupNextProgramData(context); /* continue on to the next iteration of the parent loop */ break; case ARM_STORAGE_OPERATION_ERASE: if (currentCommandSetupIsAnEraseCheck(context)) { if (failedWithRunTimeError()) { /* a run-time failure from an erase-check indicates at an erase operation is necessary */ setupNextErase(context); /* continue on to the next iteration of the parent loop */ break; } else { /* erase can be skipped since this sector is already erased. */ progressEraseContextByEraseUnit(context); } } if (context->amountLeftToOperate == 0) { return context->sizeofCurrentOperation; } setupNextEraseCheck(context); /* start the erase check on the successive erase sector */ /* continue on to the next iteration of the parent loop */ break; default: return 1; } } #endif /* #ifdef ASYNC_OPS */ } #if ASYNC_OPS static inline void launchCommandFromIRQ(const struct mtd_k64f_data *context) { launchCommand(); while (!controllerCurrentlyBusy() && !failedWithAccessError() && !failedWithProtectionError()); if (failedWithAccessError() || failedWithProtectionError()) { clearErrorStatusBits(); if (context->commandCompletionCallback) { context->commandCompletionCallback(ARM_DRIVER_ERROR_PARAMETER, context->currentCommand); } return; } enableCommandCompletionInterrupt(); } static void ftfe_ccie_irq_handler(void) { disbleCommandCompletionInterrupt(); struct mtd_k64f_data *context = &mtd_k64f_data; /* check for errors */ if (failedWithAccessError() || failedWithProtectionError()) { clearErrorStatusBits(); if (context->commandCompletionCallback) { context->commandCompletionCallback(ARM_DRIVER_ERROR_PARAMETER, context->currentCommand); } return; } if (failedWithRunTimeError()) { /* filter away run-time errors which may legitimately arise from an erase-check operation. */ if (!currentCommandSetupIsAnEraseCheck(context)) { if (context->commandCompletionCallback) { context->commandCompletionCallback(ARM_STORAGE_ERROR_RUNTIME_OR_INTEGRITY_FAILURE, context->currentCommand); } return; } } switch (context->currentCommand) { case ARM_STORAGE_OPERATION_PROGRAM_DATA: if (context->amountLeftToOperate == 0) { if (context->commandCompletionCallback) { context->commandCompletionCallback(context->sizeofCurrentOperation, ARM_STORAGE_OPERATION_PROGRAM_DATA); } return; } /* start the successive program operation */ setupNextProgramData(context); launchCommandFromIRQ(context); break; case ARM_STORAGE_OPERATION_ERASE: if (currentCommandSetupIsAnEraseCheck(context)) { if (failedWithRunTimeError()) { /* a run-time failure from an erase-check indicates at an erase operation is necessary */ setupNextErase(context); launchCommandFromIRQ(context); break; } else { /* erase can be skipped since this sector is already erased. */ progressEraseContextByEraseUnit(context); } } if (context->amountLeftToOperate == 0) { if (context->commandCompletionCallback) { context->commandCompletionCallback(context->sizeofCurrentOperation, ARM_STORAGE_OPERATION_ERASE); } return; } setupNextEraseCheck(context); /* start the erase check on the successive erase sector */ launchCommandFromIRQ(context); break; default: if (context->commandCompletionCallback) { context->commandCompletionCallback(ARM_DRIVER_OK, context->currentCommand); } break; } } #endif /* #if ASYNC_OPS */ /** * This is a helper function which can be used to do arbitrary sanity checking * on a range. * * It applies the 'check' function to every block in a given range. If any of * the check() calls return failure (i.e. something other ARM_DRIVER_OK), * validation terminates. Otherwise an ARM_DRIVER_OK is returned. */ static int32_t checkForEachBlockInRange(uint64_t startAddr, uint32_t size, int32_t (*check)(const ARM_STORAGE_BLOCK *block)) { uint64_t addrBeingValidated = startAddr; ARM_STORAGE_BLOCK block; if (getBlock(addrBeingValidated, &block) != ARM_DRIVER_OK) { return ARM_DRIVER_ERROR_PARAMETER; } while (addrBeingValidated < (startAddr + size)) { int32_t rc; if ((rc = check(&block)) != ARM_DRIVER_OK) { return rc; } /* move on to the following block */ if (nextBlock(&block, &block) != ARM_DRIVER_OK) { break; } addrBeingValidated = block.addr; } return ARM_DRIVER_OK; } static int32_t blockIsProgrammable(const ARM_STORAGE_BLOCK *blockP) { if (!blockP->attributes.programmable) { return ARM_STORAGE_ERROR_NOT_PROGRAMMABLE; } return ARM_DRIVER_OK; } static int32_t blockIsErasable(const ARM_STORAGE_BLOCK *blockP) { if (!blockP->attributes.erasable) { return ARM_STORAGE_ERROR_NOT_ERASABLE; } return ARM_DRIVER_OK; } static ARM_DRIVER_VERSION getVersion(void) { return version; } static ARM_STORAGE_CAPABILITIES getCapabilities(void) { return caps; } static int32_t initialize(ARM_Storage_Callback_t callback) { struct mtd_k64f_data *context = &mtd_k64f_data; memset(context, 0, sizeof(mtd_k64f_data)); context->currentCommand = ARM_STORAGE_OPERATION_INITIALIZE; if (context->initialized) { context->commandCompletionCallback = callback; return 1; /* synchronous completion. */ } if (controllerCurrentlyBusy()) { /* The user cannot initiate any further FTFE commands until notified that the * current command has completed.*/ return (int32_t)ARM_DRIVER_ERROR_BUSY; } clearErrorStatusBits(); context->commandCompletionCallback = callback; /* Enable the command-completion interrupt. */ #if ASYNC_OPS NVIC_SetVector(FTFE_IRQn, (uint32_t)ftfe_ccie_irq_handler); NVIC_ClearPendingIRQ(FTFE_IRQn); NVIC_EnableIRQ(FTFE_IRQn); #endif context->initialized = true; return 1; /* synchronous completion. */ } static int32_t uninitialize(void) { struct mtd_k64f_data *context = &mtd_k64f_data; context->currentCommand = ARM_STORAGE_OPERATION_UNINITIALIZE; if (!context->initialized) { return ARM_DRIVER_ERROR; } /* Disable the command-completion interrupt. */ #if ASYNC_OPS if (commandCompletionInterruptEnabled()) { disbleCommandCompletionInterrupt(); NVIC_DisableIRQ(FTFE_IRQn); NVIC_ClearPendingIRQ(FTFE_IRQn); } #endif context->commandCompletionCallback = NULL; context->initialized = false; return 1; /* synchronous completion. */ } static int32_t powerControl(ARM_POWER_STATE state) { struct mtd_k64f_data *context = &mtd_k64f_data; context->currentCommand = ARM_STORAGE_OPERATION_POWER_CONTROL; context->powerState = state; return 1; /* signal synchronous completion. */ } static int32_t readData(uint64_t addr, void *data, uint32_t size) { struct mtd_k64f_data *context = &mtd_k64f_data; context->currentCommand = ARM_STORAGE_OPERATION_READ_DATA; if (!context->initialized) { return ARM_DRIVER_ERROR; /* illegal */ } /* Argument validation. */ if ((data == NULL) || (size == 0)) { return ARM_DRIVER_ERROR_PARAMETER; /* illegal */ } if ((getBlock(addr, NULL) != ARM_DRIVER_OK) || (getBlock(addr + size - 1, NULL) != ARM_DRIVER_OK)) { return ARM_DRIVER_ERROR_PARAMETER; /* illegal address range */ } context->currentCommand = ARM_STORAGE_OPERATION_READ_DATA; memcpy(data, (const void *)(uintptr_t)addr, size); return size; /* signal synchronous completion. */ } static int32_t programData(uint64_t addr, const void *data, uint32_t size) { struct mtd_k64f_data *context = &mtd_k64f_data; if (!context->initialized) { return (int32_t)ARM_DRIVER_ERROR; /* illegal */ } /* argument validation */ if ((data == NULL) || (size == 0)) { return ARM_DRIVER_ERROR_PARAMETER; /* illegal */ } /* range check */ if ((getBlock(addr, NULL) != ARM_DRIVER_OK) || (getBlock(addr + size - 1, NULL) != ARM_DRIVER_OK)) { return ARM_DRIVER_ERROR_PARAMETER; /* illegal address range */ } /* alignment */ if (((addr % PROGRAM_UNIT) != 0) || ((size % PROGRAM_UNIT) != 0)) { return ARM_DRIVER_ERROR_PARAMETER; } /* programmability */ if (checkForEachBlockInRange(addr, size, blockIsProgrammable) != ARM_DRIVER_OK) { return ARM_STORAGE_ERROR_NOT_PROGRAMMABLE; } if (controllerCurrentlyBusy()) { /* The user cannot initiate any further FTFE commands until notified that the * current command has completed.*/ return ARM_DRIVER_ERROR_BUSY; } context->currentCommand = ARM_STORAGE_OPERATION_PROGRAM_DATA; context->sizeofCurrentOperation = size; context->amountLeftToOperate = size; context->currentOperatingData = data; context->currentOperatingStorageAddress = addr; clearErrorStatusBits(); setupNextProgramData(context); return executeCommand(context); } static int32_t erase(uint64_t addr, uint32_t size) { struct mtd_k64f_data *context = &mtd_k64f_data; if (!context->initialized) { return (int32_t)ARM_DRIVER_ERROR; /* illegal */ } /* argument validation */ if (size == 0) { return ARM_DRIVER_ERROR_PARAMETER; } /* range check */ if ((getBlock(addr, NULL) != ARM_DRIVER_OK) || (getBlock(addr + size - 1, NULL) != ARM_DRIVER_OK)) { return ARM_DRIVER_ERROR_PARAMETER; /* illegal address range */ } /* alignment */ if (((addr % ERASE_UNIT) != 0) || ((size % ERASE_UNIT) != 0)) { return ARM_DRIVER_ERROR_PARAMETER; } /* erasability */ if (checkForEachBlockInRange(addr, size, blockIsErasable) != ARM_DRIVER_OK) { return ARM_STORAGE_ERROR_NOT_ERASABLE; } if (controllerCurrentlyBusy()) { /* The user cannot initiate any further FTFE commands until notified that the * current command has completed.*/ return (int32_t)ARM_DRIVER_ERROR_BUSY; } context->currentCommand = ARM_STORAGE_OPERATION_ERASE; context->currentOperatingStorageAddress = addr; context->sizeofCurrentOperation = size; context->amountLeftToOperate = size; clearErrorStatusBits(); setupNextEraseCheck(context); return executeCommand(context); } static int32_t eraseAll(void) { struct mtd_k64f_data *context = &mtd_k64f_data; if (!context->initialized) { return (int32_t)ARM_DRIVER_ERROR; /* illegal */ } /* unless we are managing all of block 1, we shouldn't allow chip-erase. */ if ((caps.erase_all != 1) || ((sizeof(blockTable) / sizeof(ARM_STORAGE_BLOCK)) != 1) || /* there are more than one flash blocks */ (blockTable[0].addr != BLOCK1_START_ADDR) || (blockTable[0].size != BLOCK1_SIZE)) { return ARM_DRIVER_ERROR_UNSUPPORTED; } if (controllerCurrentlyBusy()) { /* The user cannot initiate any further FTFE commands until notified that the * current command has completed.*/ return (int32_t)ARM_DRIVER_ERROR_BUSY; } context->currentCommand = ARM_STORAGE_OPERATION_ERASE_ALL; clearErrorStatusBits(); /* Program FCCOB to load the required command parameters. */ setupEraseBlock(BLOCK1_START_ADDR); return executeCommand(context); } static ARM_STORAGE_STATUS getStatus(void) { struct mtd_k64f_data *context = &mtd_k64f_data; ARM_STORAGE_STATUS status = { .busy = 0, .error = 0, }; if (!context->initialized) { status.error = 1; return status; } if (controllerCurrentlyBusy()) { status.busy = 1; } else if (failedWithAccessError() || failedWithProtectionError() || failedWithRunTimeError()) { status.error = 1; } return status; } static int32_t getInfo(ARM_STORAGE_INFO *infoP) { memcpy(infoP, &info, sizeof(ARM_STORAGE_INFO)); return ARM_DRIVER_OK; } static uint32_t resolveAddress(uint64_t addr) { return (uint32_t)addr; } int32_t nextBlock(const ARM_STORAGE_BLOCK *prevP, ARM_STORAGE_BLOCK *nextP) { if (prevP == NULL) { /* fetching the first block (instead of next) */ if (nextP) { memcpy(nextP, &blockTable[0], sizeof(ARM_STORAGE_BLOCK)); } return ARM_DRIVER_OK; } static const size_t NUM_SEGMENTS = sizeof(blockTable) / sizeof(ARM_STORAGE_BLOCK); for (size_t index = 0; (NUM_SEGMENTS > 1) && (index < (NUM_SEGMENTS - 1)); index++) { if ((blockTable[index].addr == prevP->addr) && (blockTable[index].size == prevP->size)) { if (nextP) { memcpy(nextP, &blockTable[index + 1], sizeof(ARM_STORAGE_BLOCK)); } return ARM_DRIVER_OK; } } if (nextP) { nextP->addr = ARM_STORAGE_INVALID_OFFSET; nextP->size = 0; } return ARM_DRIVER_ERROR; } int32_t getBlock(uint64_t addr, ARM_STORAGE_BLOCK *blockP) { static const size_t NUM_SEGMENTS = sizeof(blockTable) / sizeof(ARM_STORAGE_BLOCK); const ARM_STORAGE_BLOCK *iter = &blockTable[0]; for (size_t index = 0; index < NUM_SEGMENTS; ++index, ++iter) { if ((addr >= iter->addr) && (addr < (iter->addr + iter->size))) { if (blockP) { memcpy(blockP, iter, sizeof(ARM_STORAGE_BLOCK)); } return ARM_DRIVER_OK; } } if (blockP) { blockP->addr = ARM_STORAGE_INVALID_OFFSET; blockP->size = 0; } return ARM_DRIVER_ERROR; } ARM_DRIVER_STORAGE ARM_Driver_Storage_(0) = { .GetVersion = getVersion, .GetCapabilities = getCapabilities, .Initialize = initialize, .Uninitialize = uninitialize, .PowerControl = powerControl, .ReadData = readData, .ProgramData = programData, .Erase = erase, .EraseAll = eraseAll, .GetStatus = getStatus, .GetInfo = getInfo, .ResolveAddress = resolveAddress, .GetNextBlock = nextBlock, .GetBlock = getBlock }; #endif /* #if DEVICE_STORAGE */