added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
targets/cmsis/TARGET_Freescale/TARGET_KL43Z/system_MKL43Z4.c
- Committer:
- <>
- Date:
- 2016-09-02
- Revision:
- 144:ef7eb2e8f9f7
File content as of revision 144:ef7eb2e8f9f7:
/* ** ################################################################### ** Processors: MKL43Z128VLH4 ** MKL43Z128VMP4 ** MKL43Z256VLH4 ** MKL43Z256VMP4 ** ** Compilers: Keil ARM C/C++ Compiler ** Freescale C/C++ for Embedded ARM ** GNU C Compiler ** IAR ANSI C/C++ Compiler for ARM ** ** Reference manual: KL43P64M48SF6RM, Rev.3, Aug 2014 ** Version: rev. 1.6, 2015-07-29 ** Build: b151217 ** ** Abstract: ** Provides a system configuration function and a global variable that ** contains the system frequency. It configures the device and initializes ** the oscillator (PLL) that is part of the microcontroller device. ** ** Copyright (c) 2015 Freescale Semiconductor, Inc. ** All rights reserved. ** ** Redistribution and use in source and binary forms, with or without modification, ** are permitted provided that the following conditions are met: ** ** o Redistributions of source code must retain the above copyright notice, this list ** of conditions and the following disclaimer. ** ** o Redistributions in binary form must reproduce the above copyright notice, this ** list of conditions and the following disclaimer in the documentation and/or ** other materials provided with the distribution. ** ** o Neither the name of Freescale Semiconductor, Inc. nor the names of its ** contributors may be used to endorse or promote products derived from this ** software without specific prior written permission. ** ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ** ** http: www.freescale.com ** mail: support@freescale.com ** ** Revisions: ** - rev. 1.0 (2014-03-27) ** Initial version. ** - rev. 1.1 (2014-05-26) ** I2S registers TCR2/RCR2 and others were changed. ** FLEXIO register FLEXIO_VERID has now bitfields: FEATURE, MINOR, MAJOR. ** Names of the bitfields of the FLEXIO_SHIFTBUF have been changed to the appropriate register name e.g.: FLEXIO_SHIFTBUFBBS_SHIFTBUFBBS. ** Peripheral_BASES macros has been changed to Peripheral_BASE_PTRS, e.g.: ADC_BASES to ADC_BASE_PTRS. ** Clock configuration for high range external oscillator has been added. ** RFSYS module access has been added. ** - rev. 1.2 (2014-07-10) ** GPIO - Renamed modules PTA,PTB,PTC,PTD,PTE to GPIOA,GPIOB,GPIOC,GPIOD,GPIOE. ** UART0 - UART0 module renamed to UART2. ** I2S - removed MDR register. ** - rev. 1.3 (2014-08-21) ** UART2 - Removed ED register. ** UART2 - Removed MODEM register. ** UART2 - Removed IR register. ** UART2 - Removed PFIFO register. ** UART2 - Removed CFIFO register. ** UART2 - Removed SFIFO register. ** UART2 - Removed TWFIFO register. ** UART2 - Removed TCFIFO register. ** UART2 - Removed RWFIFO register. ** UART2 - Removed RCFIFO register. ** USB - Removed bitfield REG_EN in CLK_RECOVER_IRC_EN register. ** SIM - Changed bitfield value MCGIRCLK to LIRC_CLK of bitfield CLKOUTSEL in SOPT2 register. ** SIM - Removed bitfield DIEID in SDID register. ** - rev. 1.4 (2014-09-01) ** USB - USB0_CTL0 was renamed to USB0_OTGCTL register. ** USB - USB0_CTL1 was renamed to USB0_CTL register. ** - rev. 1.5 (2014-09-05) ** USB - Renamed USBEN bitfield of USB0_CTL was renamed to USBENSOFEN. ** - rev. 1.6 (2015-07-29) ** Correction of backward compatibility. ** ** ################################################################### */ /*! * @file MKL43Z4 * @version 1.6 * @date 2015-07-29 * @brief Device specific configuration file for MKL43Z4 (implementation file) * * Provides a system configuration function and a global variable that contains * the system frequency. It configures the device and initializes the oscillator * (PLL) that is part of the microcontroller device. */ #include <stdint.h> #include "fsl_device_registers.h" /* ---------------------------------------------------------------------------- -- Core clock ---------------------------------------------------------------------------- */ uint32_t SystemCoreClock = DEFAULT_SYSTEM_CLOCK; /* ---------------------------------------------------------------------------- -- SystemInit() ---------------------------------------------------------------------------- */ void SystemInit (void) { #if (ACK_ISOLATION) if(PMC->REGSC & PMC_REGSC_ACKISO_MASK) { PMC->REGSC |= PMC_REGSC_ACKISO_MASK; /* VLLSx recovery */ } #endif #if (DISABLE_WDOG) /* SIM->COPC: ?=0,COPCLKSEL=0,COPDBGEN=0,COPSTPEN=0,COPT=0,COPCLKS=0,COPW=0 */ SIM->COPC = (uint32_t)0x00u; #endif /* (DISABLE_WDOG) */ } /* ---------------------------------------------------------------------------- -- SystemCoreClockUpdate() ---------------------------------------------------------------------------- */ void SystemCoreClockUpdate (void) { uint32_t MCGOUTClock; /* Variable to store output clock frequency of the MCG module */ uint16_t Divider; if ((MCG->S & MCG_S_CLKST_MASK) == 0x00U) { /* High internal reference clock is selected */ MCGOUTClock = CPU_INT_FAST_CLK_HZ; /* Fast internal reference clock selected */ } else if ((MCG->S & MCG_S_CLKST_MASK) == 0x04U) { /* Internal reference clock is selected */ Divider = (uint16_t)(0x01LU << ((MCG->SC & MCG_SC_FCRDIV_MASK) >> MCG_SC_FCRDIV_SHIFT)); MCGOUTClock = (uint32_t) (CPU_INT_SLOW_CLK_HZ / Divider); /* Slow internal reference clock 8MHz selected */ } else if ((MCG->S & MCG_S_CLKST_MASK) == 0x08U) { /* External reference clock is selected */ MCGOUTClock = CPU_XTAL_CLK_HZ; } else { /* Reserved value */ return; } /* (!((MCG->S & MCG_S_CLKST_MASK) == 0x08U)) */ SystemCoreClock = (MCGOUTClock / (0x01U + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT))); }