added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/emlib/src/em_gpio.c
- Committer:
- JojoS
- Date:
- 2016-09-10
- Revision:
- 147:ba84b7dc41a7
- Parent:
- 144:ef7eb2e8f9f7
File content as of revision 147:ba84b7dc41a7:
/***************************************************************************//** * @file em_gpio.c * @brief General Purpose IO (GPIO) peripheral API * devices. * @version 4.2.1 ******************************************************************************* * @section License * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b> ******************************************************************************* * * Permission is granted to anyone to use this software for any purpose, * including commercial applications, and to alter it and redistribute it * freely, subject to the following restrictions: * * 1. The origin of this software must not be misrepresented; you must not * claim that you wrote the original software. * 2. Altered source versions must be plainly marked as such, and must not be * misrepresented as being the original software. * 3. This notice may not be removed or altered from any source distribution. * * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no * obligation to support this Software. Silicon Labs is providing the * Software "AS IS", with no express or implied warranties of any kind, * including, but not limited to, any implied warranties of merchantability * or fitness for any particular purpose or warranties against infringement * of any proprietary rights of a third party. * * Silicon Labs will not be liable for any consequential, incidental, or * special damages, or any other relief, or for any claim by any third party, * arising from your use of this Software. * ******************************************************************************/ #include "em_gpio.h" #if defined(GPIO_COUNT) && (GPIO_COUNT > 0) /***************************************************************************//** * @addtogroup EM_Library * @{ ******************************************************************************/ /***************************************************************************//** * @addtogroup GPIO * @brief General Purpose Input/Output (GPIO) API * @{ ******************************************************************************/ /******************************************************************************* ******************************* DEFINES *********************************** ******************************************************************************/ /** @cond DO_NOT_INCLUDE_WITH_DOXYGEN */ /** Validation of pin typically usable in assert statements. */ #define GPIO_DRIVEMODE_VALID(mode) ((mode) <= 3) #define GPIO_STRENGHT_VALID(strenght) (!((strenght) & \ ~(_GPIO_P_CTRL_DRIVESTRENGTH_MASK \ | _GPIO_P_CTRL_DRIVESTRENGTHALT_MASK))) /** @endcond */ /******************************************************************************* ************************** GLOBAL FUNCTIONS ******************************* ******************************************************************************/ /***************************************************************************//** * @brief * Sets the pin location of the debug pins (Serial Wire interface). * * @note * Changing the pins used for debugging uncontrolled, may result in a lockout. * * @param[in] location * The debug pin location to use (0-3). ******************************************************************************/ void GPIO_DbgLocationSet(unsigned int location) { #if defined ( _GPIO_ROUTE_SWLOCATION_MASK ) EFM_ASSERT(location < AFCHANLOC_MAX); GPIO->ROUTE = (GPIO->ROUTE & ~_GPIO_ROUTE_SWLOCATION_MASK) | (location << _GPIO_ROUTE_SWLOCATION_SHIFT); #else (void)location; #endif } #if defined (_GPIO_P_CTRL_DRIVEMODE_MASK) /***************************************************************************//** * @brief * Sets the drive mode for a GPIO port. * * @param[in] port * The GPIO port to access. * * @param[in] mode * Drive mode to use for port. ******************************************************************************/ void GPIO_DriveModeSet(GPIO_Port_TypeDef port, GPIO_DriveMode_TypeDef mode) { EFM_ASSERT(GPIO_PORT_VALID(port) && GPIO_DRIVEMODE_VALID(mode)); GPIO->P[port].CTRL = (GPIO->P[port].CTRL & ~(_GPIO_P_CTRL_DRIVEMODE_MASK)) | (mode << _GPIO_P_CTRL_DRIVEMODE_SHIFT); } #endif #if defined (_GPIO_P_CTRL_DRIVESTRENGTH_MASK) /***************************************************************************//** * @brief * Sets the drive strength for a GPIO port. * * @param[in] port * The GPIO port to access. * * @param[in] strength * Drive strength to use for port. ******************************************************************************/ void GPIO_DriveStrengthSet(GPIO_Port_TypeDef port, GPIO_DriveStrength_TypeDef strength) { EFM_ASSERT(GPIO_PORT_VALID(port) && GPIO_STRENGHT_VALID(strength)); BUS_RegMaskedWrite(&GPIO->P[port].CTRL, _GPIO_P_CTRL_DRIVESTRENGTH_MASK | _GPIO_P_CTRL_DRIVESTRENGTHALT_MASK, strength); } #endif /***************************************************************************//** * @brief * Configure GPIO interrupt. * * @details * If reconfiguring a GPIO interrupt that is already enabled, it is generally * recommended to disable it first, see GPIO_Disable(). * * The actual GPIO interrupt handler must be in place before enabling the * interrupt. * * Notice that any pending interrupt for the selected pin is cleared by this * function. * * @note * A certain pin number can only be associated with one port. Ie, if GPIO * interrupt 1 is assigned to port A/pin 1, then it is not possibly to use * pin 1 from any other ports for interrupts. Please refer to the reference * manual. * * @param[in] port * The port to associate with @p pin. * * @param[in] pin * The GPIO interrupt number (= port pin). * * @param[in] risingEdge * Set to true if interrupts shall be enabled on rising edge, otherwise false. * * @param[in] fallingEdge * Set to true if interrupts shall be enabled on falling edge, otherwise false. * * @param[in] enable * Set to true if interrupt shall be enabled after configuration completed, * false to leave disabled. See GPIO_IntDisable() and GPIO_IntEnable(). ******************************************************************************/ void GPIO_IntConfig(GPIO_Port_TypeDef port, unsigned int pin, bool risingEdge, bool fallingEdge, bool enable) { uint32_t tmp; EFM_ASSERT(GPIO_PORT_PIN_VALID(port, pin)); /* There are two registers controlling the interrupt configuration: * The EXTIPSELL register controls pins 0-7 and EXTIPSELH controls * pins 8-15. */ if (pin < 8) { BUS_RegMaskedWrite(&GPIO->EXTIPSELL, 0xF << (4 * pin), port << (4 * pin)); } else { tmp = pin - 8; BUS_RegMaskedWrite(&GPIO->EXTIPSELH, 0xF << (4 * tmp), port << (4 * tmp)); } /* Enable/disable rising edge */ BUS_RegBitWrite(&(GPIO->EXTIRISE), pin, risingEdge); /* Enable/disable falling edge */ BUS_RegBitWrite(&(GPIO->EXTIFALL), pin, fallingEdge); /* Clear any pending interrupt */ GPIO->IFC = 1 << pin; /* Finally enable/disable interrupt */ BUS_RegBitWrite(&(GPIO->IEN), pin, enable); } /***************************************************************************//** * @brief * Set the mode for a GPIO pin. * * @param[in] port * The GPIO port to access. * * @param[in] pin * The pin number in the port. * * @param[in] mode * The desired pin mode. * * @param[in] out * Value to set for pin in DOUT register. The DOUT setting is important for * even some input mode configurations, determining pull-up/down direction. ******************************************************************************/ void GPIO_PinModeSet(GPIO_Port_TypeDef port, unsigned int pin, GPIO_Mode_TypeDef mode, unsigned int out) { EFM_ASSERT(GPIO_PORT_PIN_VALID(port, pin)); /* If disabling pin, do not modify DOUT in order to reduce chance for */ /* glitch/spike (may not be sufficient precaution in all use cases) */ if (mode != gpioModeDisabled) { if (out) { GPIO_PinOutSet(port, pin); } else { GPIO_PinOutClear(port, pin); } } /* There are two registers controlling the pins for each port. The MODEL * register controls pins 0-7 and MODEH controls pins 8-15. */ if (pin < 8) { BUS_RegMaskedWrite(&GPIO->P[port].MODEL, 0xF << (pin * 4), mode << (pin * 4)); } else { BUS_RegMaskedWrite(&GPIO->P[port].MODEH, 0xF << ((pin - 8) * 4), mode << ((pin - 8) * 4)); } if (mode == gpioModeDisabled) { if (out) { GPIO_PinOutSet(port, pin); } else { GPIO_PinOutClear(port, pin); } } } #if defined( _GPIO_EM4WUEN_MASK ) /**************************************************************************//** * @brief * Enable GPIO pin wake-up from EM4. When the function exits, * EM4 mode can be safely entered. * * @note * It is assumed that the GPIO pin modes are set correctly. * Valid modes are @ref gpioModeInput and @ref gpioModeInputPull. * * @param[in] pinmask * Bitmask containing the bitwise logic OR of which GPIO pin(s) to enable. * Refer to Reference Manuals for pinmask to GPIO port/pin mapping. * @param[in] polaritymask * Bitmask containing the bitwise logic OR of GPIO pin(s) wake-up polarity. * Refer to Reference Manuals for pinmask to GPIO port/pin mapping. *****************************************************************************/ void GPIO_EM4EnablePinWakeup(uint32_t pinmask, uint32_t polaritymask) { EFM_ASSERT((pinmask & ~_GPIO_EM4WUEN_MASK) == 0); #if defined( _GPIO_EM4WUPOL_MASK ) EFM_ASSERT((polaritymask & ~_GPIO_EM4WUPOL_MASK) == 0); GPIO->EM4WUPOL &= ~pinmask; /* Set wakeup polarity */ GPIO->EM4WUPOL |= pinmask & polaritymask; #elif defined( _GPIO_EXTILEVEL_MASK ) EFM_ASSERT((polaritymask & ~_GPIO_EXTILEVEL_MASK) == 0); GPIO->EXTILEVEL &= ~pinmask; GPIO->EXTILEVEL |= pinmask & polaritymask; #endif GPIO->EM4WUEN |= pinmask; /* Enable wakeup */ GPIO_EM4SetPinRetention(true); /* Enable pin retention */ #if defined( _GPIO_CMD_EM4WUCLR_MASK ) GPIO->CMD = GPIO_CMD_EM4WUCLR; /* Clear wake-up logic */ #elif defined( _GPIO_IFC_EM4WU_MASK ) GPIO_IntClear(pinmask); #endif } #endif /** @} (end addtogroup GPIO) */ /** @} (end addtogroup EM_Library) */ #endif /* defined(GPIO_COUNT) && (GPIO_COUNT > 0) */