added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFM32PG_STK3401/PinNames.h
- Committer:
- mbed_official
- Date:
- 2016-01-15
- Revision:
- 50:a417edff4437
- Child:
- 144:ef7eb2e8f9f7
File content as of revision 50:a417edff4437:
/***************************************************************************//** * @file PinNames.h ******************************************************************************* * @section License * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b> ******************************************************************************* * * Permission is granted to anyone to use this software for any purpose, * including commercial applications, and to alter it and redistribute it * freely, subject to the following restrictions: * * 1. The origin of this software must not be misrepresented; you must not * claim that you wrote the original software. * 2. Altered source versions must be plainly marked as such, and must not be * misrepresented as being the original software. * 3. This notice may not be removed or altered from any source distribution. * * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no * obligation to support this Software. Silicon Labs is providing the * Software "AS IS", with no express or implied warranties of any kind, * including, but not limited to, any implied warranties of merchantability * or fitness for any particular purpose or warranties against infringement * of any proprietary rights of a third party. * * Silicon Labs will not be liable for any consequential, incidental, or * special damages, or any other relief, or for any claim by any third party, * arising from your use of this Software. * ******************************************************************************/ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #include "em_gpio.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT = 0, PIN_OUTPUT = 1 } PinDirection; typedef enum { /* EFM32 Pin Names * First 4 bits represent pin number, the remaining * bits represent port number (A = 0, B = 1, ...) */ PA0 = 0 << 4, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, PA10, PA11, PA12, PA13, PA14, PA15, PB0 = 1 << 4, PB1, PB2, PB3, PB4, PB5, PB6, PB7, PB8, PB9, PB10, PB11, PB12, PB13, PB14, PB15, PC0 = 2 << 4, PC1, PC2, PC3, PC4, PC5, PC6, PC7, PC8, PC9, PC10, PC11, PC12, PC13, PC14, PC15, PD0 = 3 << 4, PD1, PD2, PD3, PD4, PD5, PD6, PD7, PD8, PD9, PD10, PD11, PD12, PD13, PD14, PD15, PE0 = 4 << 4, PE1, PE2, PE3, PE4, PE5, PE6, PE7, PE8, PE9, PE10, PE11, PE12, PE13, PE14, PE15, PF0 = 5 << 4, PF1, PF2, PF3, PF4, PF5, PF6, PF7, PF8, PF9, PF10, PF11, PF12, PF13, PF14, PF15, /* Starter Kit says LED0 and LED1, but mbed expects 1 and 2. This way using 1 and 2 or 0 and 1 will work. */ LED0 = PF4, LED1 = PF5, LED2 = LED0, LED3 = LED0, LED4 = LED1, /* Push Buttons */ SW0 = PF6, SW1 = PF7, BTN0 = SW0, BTN1 = SW1, /* Serial (just some usable pins) */ SERIAL_TX = PD10, SERIAL_RX = PD11, /* Board Controller UART (USB) + enable pin */ USBTX = PA0, USBRX = PA1, EFM_BC_EN = PA5, /* Not connected */ NC = (int) 0xFFFFFFFF } PinName; /* 0x10 represents setting the DOUT register (see efm32 modes in ref. manual) */ typedef enum { /* EFM32 pin modes */ Disabled = gpioModeDisabled, DisabledPullUp = gpioModeDisabled | 0x10, Input = gpioModeInput, InputFilter = gpioModeInput | 0x10, InputPullDown = gpioModeInputPull, InputPullUp = gpioModeInputPull | 0x10, InputPullFilterDown = gpioModeInputPullFilter, InputPullFilterUp = gpioModeInputPullFilter | 0x10, PushPull = gpioModePushPull, WiredOr = gpioModeWiredOr, WiredOrPullDown = gpioModeWiredOrPullDown, WiredAnd = gpioModeWiredAnd, WiredAndFilter = gpioModeWiredAndFilter, WiredAndPullUp = gpioModeWiredAndPullUp, WiredAndPullUpFilter = gpioModeWiredAndPullUpFilter, /* mbed modes: * PullUp, PullDown, PullNone, OpenDrain * * mbed default digital input mode: * PullDefault * * mbed default digital output mode: * PullNone */ PullUp = InputPullUp, PullDown = InputPullDown, OpenDrain = WiredAnd, PullNone = PushPull, PullDefault = PushPull } PinMode; #ifdef __cplusplus } #endif #endif