added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
targets/hal/TARGET_Freescale/TARGET_KSDK2_MCUS/api/i2c_api.c
- Committer:
- mbed_official
- Date:
- 2016-05-03
- Revision:
- 121:7f86b4238bec
- Child:
- 144:ef7eb2e8f9f7
File content as of revision 121:7f86b4238bec:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "mbed_assert.h" #include "i2c_api.h" #if DEVICE_I2C #include "cmsis.h" #include "pinmap.h" #include "fsl_i2c.h" #include "fsl_port.h" #include "peripheral_clock_defines.h" #include "PeripheralPins.h" static int i2c_address = 0; /* Array of I2C peripheral base address. */ static I2C_Type *const i2c_addrs[] = I2C_BASE_PTRS; /* Array of I2C bus clock frequencies */ static clock_name_t const i2c_clocks[] = I2C_CLOCK_FREQS; void i2c_init(i2c_t *obj, PinName sda, PinName scl) { uint32_t i2c_sda = pinmap_peripheral(sda, PinMap_I2C_SDA); uint32_t i2c_scl = pinmap_peripheral(scl, PinMap_I2C_SCL); obj->instance = pinmap_merge(i2c_sda, i2c_scl); MBED_ASSERT((int)obj->instance != NC); i2c_master_config_t master_config; I2C_MasterGetDefaultConfig(&master_config); I2C_MasterInit(i2c_addrs[obj->instance], &master_config, CLOCK_GetFreq(i2c_clocks[obj->instance])); I2C_EnableInterrupts(i2c_addrs[obj->instance], kI2C_GlobalInterruptEnable); pinmap_pinout(sda, PinMap_I2C_SDA); pinmap_pinout(scl, PinMap_I2C_SCL); #if defined(FSL_FEATURE_PORT_HAS_OPEN_DRAIN) && FSL_FEATURE_PORT_HAS_OPEN_DRAIN PORT_Type *port_addrs[] = PORT_BASE_PTRS; PORT_Type *base = port_addrs[sda >> GPIO_PORT_SHIFT]; base->PCR[sda & 0xFF] |= PORT_PCR_ODE_MASK; base->PCR[scl & 0xFF] |= PORT_PCR_ODE_MASK; #endif } int i2c_start(i2c_t *obj) { I2C_Type *base = i2c_addrs[obj->instance]; uint32_t statusFlags = I2C_MasterGetStatusFlags(base); /* Return an error if the bus is already in use. */ if (statusFlags & kI2C_BusBusyFlag) { return 1; } /* Send the START signal. */ base->C1 |= I2C_C1_MST_MASK | I2C_C1_TX_MASK; #if defined(FSL_FEATURE_I2C_HAS_DOUBLE_BUFFERING) && FSL_FEATURE_I2C_HAS_DOUBLE_BUFFERING while (!(base->S2 & I2C_S2_EMPTY_MASK)) { } #endif /* FSL_FEATURE_I2C_HAS_DOUBLE_BUFFERING */ return 0; } int i2c_stop(i2c_t *obj) { if (I2C_MasterStop(i2c_addrs[obj->instance]) != kStatus_Success) { return 1; } return 0; } void i2c_frequency(i2c_t *obj, int hz) { uint32_t busClock; busClock = CLOCK_GetFreq(i2c_clocks[obj->instance]); I2C_MasterSetBaudRate(i2c_addrs[obj->instance], hz, busClock); } int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) { I2C_Type *base = i2c_addrs[obj->instance]; i2c_master_transfer_t master_xfer; i2c_address = address; memset(&master_xfer, 0, sizeof(master_xfer)); master_xfer.slaveAddress = address; master_xfer.direction = kI2C_Read; master_xfer.data = (uint8_t *)data; master_xfer.dataSize = length; /* The below function will issue a STOP signal at the end of the transfer. * This is required by the hardware in order to receive the last byte */ if (I2C_MasterTransferBlocking(base, &master_xfer) != kStatus_Success) { return I2C_ERROR_NO_SLAVE; } return length; } int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) { I2C_Type *base = i2c_addrs[obj->instance]; i2c_master_transfer_t master_xfer; memset(&master_xfer, 0, sizeof(master_xfer)); master_xfer.slaveAddress = address; master_xfer.direction = kI2C_Write; master_xfer.data = (uint8_t *)data; master_xfer.dataSize = length; if (!stop) master_xfer.flags = kI2C_TransferNoStopFlag; if (I2C_MasterTransferBlocking(base, &master_xfer) != kStatus_Success) { return I2C_ERROR_NO_SLAVE; } return length; } void i2c_reset(i2c_t *obj) { i2c_stop(obj); } int i2c_byte_read(i2c_t *obj, int last) { uint8_t data; I2C_Type *base = i2c_addrs[obj->instance]; i2c_master_transfer_t master_xfer; memset(&master_xfer, 0, sizeof(master_xfer)); master_xfer.slaveAddress = i2c_address; master_xfer.direction = kI2C_Read; master_xfer.data = &data; master_xfer.dataSize = 1; /* The below function will issue a STOP signal at the end of the transfer. * This is required by the hardware in order to receive the last byte */ if (I2C_MasterTransferBlocking(base, &master_xfer) != kStatus_Success) { return I2C_ERROR_NO_SLAVE; } return data; } int i2c_byte_write(i2c_t *obj, int data) { if (I2C_MasterWriteBlocking(i2c_addrs[obj->instance], (uint8_t *)(&data), 1) == kStatus_Success) { return 1; } return 0; } #if DEVICE_I2CSLAVE void i2c_slave_mode(i2c_t *obj, int enable_slave) { i2c_slave_config_t slave_config; I2C_SlaveGetDefaultConfig(&slave_config); slave_config.slaveAddress = 0; slave_config.enableSlave = (bool)enable_slave; I2C_SlaveInit(i2c_addrs[obj->instance], &slave_config); } int i2c_slave_receive(i2c_t *obj) { uint32_t status_flags = I2C_SlaveGetStatusFlags(i2c_addrs[obj->instance]); if (status_flags & kI2C_AddressMatchFlag) { if (status_flags & kI2C_TransferDirectionFlag) { // read addressed return 1; } else { // write addressed return 3; } } else { // slave not addressed return 0; } } int i2c_slave_read(i2c_t *obj, char *data, int length) { I2C_Type *base = i2c_addrs[obj->instance]; if (base->S & kI2C_AddressMatchFlag) { /* Slave receive, master writing to slave. */ base->C1 &= ~(I2C_C1_TX_MASK | I2C_C1_TXAK_MASK); /* Read dummy to release the bus. */ base->D; } I2C_SlaveReadBlocking(base, (uint8_t *)data, length); return length; } int i2c_slave_write(i2c_t *obj, const char *data, int length) { I2C_Type *base = i2c_addrs[obj->instance]; I2C_SlaveWriteBlocking(base, (uint8_t *)data, length); /* Switch to receive mode. */ base->C1 &= ~(I2C_C1_TX_MASK | I2C_C1_TXAK_MASK); /* Read dummy to release bus. */ base->D; return length; } void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask) { i2c_addrs[obj->instance]->A1 = ((uint32_t)(address)) << 1U; } #endif #endif