added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
Diff: targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/mbed_overrides.c
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 50:a417edff4437
--- a/targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/mbed_overrides.c Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/mbed_overrides.c Fri Sep 02 15:07:44 2016 +0100 @@ -1,113 +1,106 @@ -/***************************************************************************//** - * @file mbed_overrides.c - ******************************************************************************* - * @section License - * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b> - ******************************************************************************* - * - * Permission is granted to anyone to use this software for any purpose, - * including commercial applications, and to alter it and redistribute it - * freely, subject to the following restrictions: - * - * 1. The origin of this software must not be misrepresented; you must not - * claim that you wrote the original software. - * 2. Altered source versions must be plainly marked as such, and must not be - * misrepresented as being the original software. - * 3. This notice may not be removed or altered from any source distribution. - * - * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no - * obligation to support this Software. Silicon Labs is providing the - * Software "AS IS", with no express or implied warranties of any kind, - * including, but not limited to, any implied warranties of merchantability - * or fitness for any particular purpose or warranties against infringement - * of any proprietary rights of a third party. - * - * Silicon Labs will not be liable for any consequential, incidental, or - * special damages, or any other relief, or for any claim by any third party, - * arising from your use of this Software. - * - ******************************************************************************/ - -#include "em_chip.h" -#include "em_device.h" -#include "em_cmu.h" -#include "em_emu.h" -#include "device_peripherals.h" -#include "device.h" -#include "em_usart.h" -#include "gpio_api.h" - -gpio_t bc_enable; - -/* Called before main - implement here if board needs it. - * Otherwise, let the application override this if necessary */ -void mbed_sdk_init() -{ - CHIP_Init(); - -#if defined(_SILICON_LABS_32B_PLATFORM_2) - EMU_DCDCInit_TypeDef dcdcInit = EMU_DCDCINIT_DEFAULT; - EMU_DCDCInit(&dcdcInit); -#endif - - /* Set up the clock sources for this chip */ -#if( CORE_CLOCK_SOURCE == HFXO) - CMU_ClockSelectSet(cmuClock_HF, cmuSelect_HFXO); - SystemHFXOClockSet(HFXO_FREQUENCY); -#elif( CORE_CLOCK_SOURCE == HFRCO) - CMU_ClockSelectSet(cmuClock_HF, cmuSelect_HFRCO); -# if defined _CMU_HFRCOCTRL_BAND_MASK - CMU_HFRCOBandSet(HFRCO_FREQUENCY); -# elif defined _CMU_HFRCOCTRL_FREQRANGE_MASK - CMU_HFRCOFreqSet(HFRCO_FREQUENCY_ENUM); -# else -# error "Can't set HFRCO frequency" -# endif -#else -# error "Core clock selection not valid (mbed_overrides.c)" -#endif - - CMU_ClockEnable(cmuClock_CORELE, true); - -#if( LOW_ENERGY_CLOCK_SOURCE == LFXO ) -# ifdef _CMU_LFACLKEN0_MASK - CMU_ClockSelectSet(cmuClock_LFA, cmuSelect_LFXO); -# endif -# ifdef _CMU_LFBCLKEN0_MASK - /* cmuClock_LFB (to date) only has LEUART peripherals. - * This gets set automatically whenever you create serial objects using LEUART - */ -# endif -# ifdef _CMU_LFECLKEN0_MASK - CMU_ClockSelectSet(cmuClock_LFE, cmuSelect_LFXO); -# endif - SystemLFXOClockSet(LFXO_FREQUENCY); - -#elif( LOW_ENERGY_CLOCK_SOURCE == LFRCO ) -# ifdef _CMU_LFACLKEN0_MASK - CMU_ClockSelectSet(cmuClock_LFA, cmuSelect_LFRCO); -# endif -# ifdef _CMU_LFBCLKEN0_MASK - //CMU_ClockSelectSet(cmuClock_LFB, cmuSelect_LFRCO); -# endif -# ifdef _CMU_LFECLKEN0_MASK - CMU_ClockSelectSet(cmuClock_LFE, cmuSelect_LFRCO); -# endif - -#elif( LOW_ENERGY_CLOCK_SOURCE == ULFRCO) -# ifdef _CMU_LFACLKEN0_MASK - CMU_ClockSelectSet(cmuClock_LFA, cmuSelect_ULFRCO); -# endif -# ifdef _CMU_LFBCLKEN0_MASK - CMU_ClockSelectSet(cmuClock_LFB, cmuSelect_ULFRCO); -# endif -# ifdef _CMU_LFECLKEN0_MASK - CMU_ClockSelectSet(cmuClock_LFE, cmuSelect_ULFRCO); -# endif -#else -# error "Low energy clock selection not valid" -#endif - - /* Enable BC line driver to avoid garbage on CDC port */ - gpio_init_out_ex(&bc_enable, EFM_BC_EN, 1); -} +/***************************************************************************//** + * @file mbed_overrides.c + ******************************************************************************* + * @section License + * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b> + ******************************************************************************* + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ + +#include "em_chip.h" +#include "em_device.h" +#include "em_cmu.h" +#include "em_emu.h" +#include "device_peripherals.h" +#include "device.h" +#include "em_usart.h" +#include "gpio_api.h" + +gpio_t bc_enable; + +/* Called before main - implement here if board needs it. + * Otherwise, let the application override this if necessary */ +void mbed_sdk_init() +{ + CHIP_Init(); + +#if defined(_SILICON_LABS_32B_PLATFORM_2) + EMU_DCDCInit_TypeDef dcdcInit = EMU_DCDCINIT_DEFAULT; + EMU_DCDCInit(&dcdcInit); +#endif + + /* Set up the clock sources for this chip */ +#if( CORE_CLOCK_SOURCE == HFXO) + CMU_ClockSelectSet(cmuClock_HF, cmuSelect_HFXO); + SystemHFXOClockSet(HFXO_FREQUENCY); +#elif( CORE_CLOCK_SOURCE == HFRCO) + CMU_ClockSelectSet(cmuClock_HF, cmuSelect_HFRCO); +# if defined _CMU_HFRCOCTRL_BAND_MASK + CMU_HFRCOBandSet(HFRCO_FREQUENCY); +# elif defined _CMU_HFRCOCTRL_FREQRANGE_MASK + CMU_HFRCOFreqSet(HFRCO_FREQUENCY_ENUM); +# else +# error "Can't set HFRCO frequency" +# endif +#else +# error "Core clock selection not valid (mbed_overrides.c)" +#endif + + CMU_ClockEnable(cmuClock_CORELE, true); + +#if( LOW_ENERGY_CLOCK_SOURCE == LFXO ) +# ifdef _CMU_LFACLKEN0_MASK + CMU_ClockSelectSet(cmuClock_LFA, cmuSelect_LFXO); +# endif +# ifdef _CMU_LFBCLKEN0_MASK + /* cmuClock_LFB (to date) only has LEUART peripherals. + * This gets set automatically whenever you create serial objects using LEUART + */ +# endif +# ifdef _CMU_LFECLKEN0_MASK + CMU_ClockSelectSet(cmuClock_LFE, cmuSelect_LFXO); +# endif + SystemLFXOClockSet(LFXO_FREQUENCY); + +#elif( LOW_ENERGY_CLOCK_SOURCE == LFRCO ) +# ifdef _CMU_LFACLKEN0_MASK + CMU_ClockSelectSet(cmuClock_LFA, cmuSelect_LFRCO); +# endif +# ifdef _CMU_LFBCLKEN0_MASK + //CMU_ClockSelectSet(cmuClock_LFB, cmuSelect_LFRCO); +# endif +# ifdef _CMU_LFECLKEN0_MASK + CMU_ClockSelectSet(cmuClock_LFE, cmuSelect_LFRCO); +# endif + +#elif( LOW_ENERGY_CLOCK_SOURCE == ULFRCO) +# ifdef _CMU_LFACLKEN0_MASK + CMU_ClockSelectSet(cmuClock_LFA, cmuSelect_ULFRCO); +# endif +# ifdef _CMU_LFBCLKEN0_MASK + CMU_ClockSelectSet(cmuClock_LFB, cmuSelect_ULFRCO); +# endif +# ifdef _CMU_LFECLKEN0_MASK + CMU_ClockSelectSet(cmuClock_LFE, cmuSelect_ULFRCO); +# endif +#else +# error "Low energy clock selection not valid" +#endif + + /* Enable BC line driver to avoid garbage on CDC port */ + gpio_init_out_ex(&bc_enable, EFM_BC_EN, 1); +}